terracotta wall assembly...material schedule • terracotta types and sizes - “a” 4’x1’x1...

31
TERRACOTTA WALL ASSEMBLY ARCH2431 OLIVER HADI PROF KING

Upload: others

Post on 05-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

TERRACOTTA WALL ASSEMBLYARCH2431

OLIVER HADIPROF KING

Page 2: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

REFERENCED PROJECT

Elmhurst Branch Library, Queens

Marpillero Pollak Architects

Page 3: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

STRUCTURAL ISO

• Primary structure:Composite corrugated metal deck supported by steel girders and columns

• Secondary structure:-Gypsum wall board(GWB) on cold formed metal studs)-Concrete masonry unit(CMU) coursing for parapet

• Foundation:Cast in place(CIP) concrete

Page 4: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 5: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

MATERIAL SCHEDULE

• Terracotta types and sizes- “A” 4’x1’x1 5/8” panel /”a” for cutting- “B” 2’x1’x1 5/8” corner panel with 45° precut-”c1” Parapet coping – 2’ with 45° precut-”C” Parapet coping – 4’ /”c” for cutting

• Aluminum channel sizes- “D” 11”x3” horizontal member- “d” 3”x4” vertical member

Page 6: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

SUBSTRUCTURE SCHEDULE

• Steel Zee channel in 10’ increments • Terracotta aluminum track – by Boston Valley

-two sided-one sided

• Clips and rubber clip heads-4 pieces per panels

Page 7: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

AIR/VAPOR BARRIER+FENESTRATION

Tremco 116 VulkemPolyurethane High-Performance Sealant

White Premium Reinforced PVC Roofing Membrane 45 mil

Henry Blueskin SA VP160 Membrane

GLASSvent™ UT (Ultra Thermal) Windows

Page 8: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45

THERMAL BARRIER+FENESTRATION

GLASSvent™ UT (Ultra Thermal) Windows

ROCKWOOL Mineral Wool insulation – 2”& 3 ½”Dimensions:24" x 48" (610 mm x 1219 mm)

16" x 48" (406 mm x 1219 mm)

Isokorb® structural thermal break for concrete parapet connections

Page 9: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 10: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 11: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 12: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 13: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 14: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 15: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 16: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 17: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 18: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 19: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 20: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 21: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 22: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 23: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 24: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 25: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 26: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 27: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 28: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 29: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 30: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45
Page 31: TERRACOTTA WALL ASSEMBLY...MATERIAL SCHEDULE • Terracotta types and sizes - “A” 4’x1’x1 5/8” panel /”a” for cutting - “B” 2’x1’x1 5/8” corner panel with 45