Telescopic forksHydraulic lift truck forksSave time, space and money

Do more with pallets: Double-deep stacking

One sided loading

Hydraulic extensions

Dual load transport

Innovative Logistic Products

3

9

8

6

are attachments that can be used throughout industry to save time, space and money.

MSE-FORKS was the first to develop a hydraulic extending and retracting lift truck fork. Since their introduction in 1980, KOOI-REACHFORKS® have become the benchmark in materials handling. With one and two cylinders in each fork and an integrated equa-lizer system, MSE-FORKS guarantees you the best Telescopic fork on the

market. By using KOOI-REACHFORKS® for double-deep stacking, storage volumes can be dramatically incre-ased. Trucks and trains can also be completely loaded and unloaded from one side, reducing turnaround times and improving safety.

Additional advantages of the KOOI-REACHFORKS®:1. Interchangeable wear resistant strips.2. Reinforced heel giving less deflection.3. Honed cylinder bores improve seal life.4. Hard chromed piston rods protected by outer forks.5. Specially designed wiper ring protects the forks even in dirty conditions.6. Special design fitting guard for easier connection of the forks onto the fork carrier.7. One or twin cylinders in each fork allow the forks to work in all kind of applications.8. Unique design outerforks includes integrated wear plate (400HB) for longer fork life. 9. Fully integrated oil channels and hydraulic parts means working parts are protected reducing maintenance costs. 10. An ingenious combination of laser cutting and sheet metal work construction ensures that sleeves do not catch when withdrawing from pallets. The sleeves corners are fully rounded off along all edges.

KOOI-REACHFORKS®

10

21

4

5

7

Single RangeMainly on reachtrucks for double-deep stackingThese single-cylinder telescopic forks are ideal for double-deep pallet storage and therefore are mostly used on warehouse trucks, reachtrucks etc.

Double RangeMainly on counterbalance and side-loader lift trucks for one sided loadingThese double cylinder telescopic forks are ideal for one-sided loading and unloading of trucks, trains etc. and can perform under demanding circumstances.

Slim RangeMainly included on multi-pallet handlersThese ultra-narrow telescopic forks use are ideal for inserting between bricks or blocks etc. Their width allows them to be used on multi-load handlers for lifting one, two or even four pallets at once.

Extension RangeMainly on counterbalance and reachtrucks for variable lenghts and dual pallet handlingThese hydraulically adjustable forks can drastically reduce costs incurred as a result of damaged products and pallets.

Power RangeMainly on mounted forklift trucks for one sided loadingThese telescopic forks are specially designed for use on truck-mounted forklift trucks and are fitted with an external synchro-nization valve in order to cope with the higher power demands required for this type of usage.

Heavy Duty RangeMainly on heavy counterbalance and side-loaders forklift trucks for one sided loadingThese telescopic forks are specially designed for use on heavy lift trucks with capacities of more than 10.5000 kg and are fitted with an external synchronization valve in order to cope with the higher power demands required for this type of usage

The need for equal movement (Equalizer system)Uneven movement is the most significant problem encoun-tered when using any telescopic forks. This can lead to twisting of pallets which can cause dangerous situations when loading or unloading and is particularly hazardous when working at height in double-deep racking systems. MSE-FORKS self-equalizer system guarantees 100% synchronization of movement.

Other advantages• Visibilityisconsiderablyimprovedthroughareduction in the number of hoses and the absence of an external flowdividing system.•WhentheloadisnotcentralizedontheKOOI- REACHFORKS® the equalizer forks will compensate the force on the hydraulic forks automatically.• Easyandquickconnectionontotheforkcarrier.• Lowerfittingcostsbecauseoftheabsenceofseparate flowdivider.

The fact that the KOOI-REACHFORKS® can reach twice as far as normal forks from one side means that the racking at each side of the aisle can be doubled.

Double deep storage has become a very popular choice in “high throughput” operations and is ideal for Cold stores,

Dry stores and the storage of multiple pallets of the same products, known as FILO (First In Last Out) principle. KOOI-REACHFORKS® are the best system for changing any type of forklift truck into a “double-deep” truck. The Double-deep-stacking application has already genera-ted considerable cost savings.

Double-deep-stacking: The use of double-deep- stacking increases warehouse capacity by up to 30% compared to “single-deep” warehouse operations.

Applications

Telescopic Forks vs. Pantograph systemTelescopic forks can also have some important benefits in

single-deep and double-deep applications. Compared to

reach trucks with a pantograph or moving mast, the relatively

light Telescopic forks result in a reach truck with better

stability, visibility and higher lifting capacity. Telescopic forks

have some distinct advantages compared to a pantograph

such as:

1. Reduced attachment weight (approx. 35%).

2.Whenusingtruckswithafixedmastitisno

longer necessary to have a bottom racking beam,

increasing ware house capacity and reducing

overall racking costs.

3.Virtuallythesamelostloadthicknessasstandard

forks and optimum visibility.

4. Shorter mast compared to the total lift truck height.

5. All parts are integrated inside the forks and cannot be

damaged. Fewer items require maintenance, meaning

reduced operating costs.

6. Easy to install on new or existing lift trucks.

7. Double pallet transport possible with

same reach system.

ApplicationsLoading and unloadingTrucks as well as trains can be completely loaded and unloa-

ded from one side. It is no longer necessary to turn the vehicle

or approach the trailer from both sides. This way of pallet

handling makes the operation safer than the traditional method

because all the operations are carried out from one side. The

time saving is ± 30%. The reduced amount of space required

for turning means that extra space is created which can, for

example, be used to store additional goods. Of course we can-

not calculate the benefits for the truck driver but the fact that

the trailer only has to be opened from one side and the fact that

no extra manoeuvre is required should not be underestimated.

Double pallet transportKOOI-REACHFORKS® can be extended to transport two pallets

at a time. This can generate considerable benefits involving

large volumes or long distances. Combinations with a fork

positioner and spreader are possible as well, allowing you

to handle 4 pallets at a time which improves the loading and

unloading speed of trucks and trains enormously.

Hydraulic extensionsThese telescopic forks allow a wide variety of different pallet

sizes to be handled safely and quickly without damage to the

pallets or goods. They also help to reduce the safety risks and

wasted time often associated with the use of manual forks

extensions.

These state of the art fork extensions have a special cross

section so that the underside of the outerforks cannot catch

pallet boards, preventing damage.

Hardened wearstrip

Telescopic forks on fork positionersTelescopic forks can be used with most fork positioners. This

combination can save a lot of time when a variety of pallets

types are being handled. One, two or even four pallets can

be handled by special small telescopic forks mounted on a

double fork positioner.

Telescopic forks on side-loaders and heavy capacity trucksTelescopic forks are frequently used on side-loaders

for “double-deep” stacking operations and to help

manoeuvre the load. They have the advantage over traditional

pantograph attachments of not affecting platform width

while adding little weight.

The advantage of KOOI-REACHFORKS® compared to other

devices such as a pantograph is a greater residual capacity

will be achieved through its lower attachment weight. The

machine is easier to operate, has better performance, is more

cost effective and the driver’s view is not obstructed.

Telescopic forks on truck-mounted forkliftsA lot of ‘piggyback’ lift trucks are equipped with Telescopic

forks. The fixed mast in combination with the Telescopic forks

provide a stable, lightweight machine with a relatively high

capacity.

Single Range - mainly on reachtrucks for double-deep stackingModel Capacity on Section Length / Stroke Lost Load CoG1 CoG2 Weight ISO/FEM

24” (lbs) D1/D2 x S Thickness (in) (in) (lbs)(in) (in) +/- +/- +/-

RG2 20 1100/07504,400 5.15”/5.47” x 2.2”

43.3”/29.5”1.7”

14.6’ 20.9” 3232ARG2 20 1200/0850 47.2”/33.4” 16.3” 23.6” 343

RG2 20 1350/1000 53.1”/39.3” 18.9” 28.0” 374RG2 30 1100/0750

6,600 5.15”/5.47” x 2.2”43.3”/29.5”

1.7”13.8” 20.0” 345

3ARG2 30 1200/0850 47.2”/33.4” 15.6” 22.8” 365RG2 30 1350/1000 53.1”/39.3” 18.1” 26.8” 396TFG2 30 1050/0800

6,600 5.15”/5.47” x 2.4”41.3”/31.5”

1.9”13.8” 19.9” 370

3ATFG2 30 1150/0900 42.2”/35.4” 15.4” 22.6” 392TFG2 30 1300/1050 51.8”/41.3” 17.9” 26.8” 425TRG2 30 0800/0750

6.69”/7.04” x 2.6”31.5”/29.5”

1.9”10.5” 16.2” 400

3ATRG2 30 1000/0950 6,600 39.4”/37.4” 14.0” 21.8” 469TRG2 30 1200/1150 47.2”/45.3” 17.6” 27.5” 535RGN2 35 1100/0750

7,700 5.15”/5.47” x 2.4”43,3”/29,5”

1,9”14.0” 19.7” 378

3ARGN2 35 1200/0850 47,2”/33,4” 16.4” 23.2” 396RGN2 35 1350/1000 53,1”/39,3” 18.2” 26.2” 436Double Range - mainly on counterbalance and side-loader lift trucks for one sided loadingRG4 25 1100/0750

5,500 6.33”/6.65” x 2.2”43.3”/29.5”

1.7”14.3” 21.3” 392

2ARG4 25 1200/0850 47.2”/33.4” 15.9” 24.0” 416RG4 25 1350/1000 53.1”/39.3” 18.7” 28.3” 453RG4 35 1100/0750

7,700 6.33”/6.65” x 2.2”43.3”/29.5”

1.7”13.5” 19.9” 416

3ARG4 35 1200/0850 47.2”/33.4” 15.2” 22.7” 440RG4 35 1350/1000 53.1”/39.3” 17.7” 27.0” 477RG4 45 1100/0750

9,900 6.33”/6.65” x 2.2”43.3”/29.5”

1.7”13.5” 19.9” 416

3ARG4 45 1200/0850 47.2”/33.4” 15.2” 22.7” 440RG4 45 1350/1000 53.1”/39.3” 17.7” 27.0” 477RG4 58 1100/0750

12,760 6.33”/6.65” x 2.4”43.3”/29.5”

1.9”12.4” 17.7” 513

4ARG4 58 1200/0850 47.2”/33.4” 13.9” 20.2” 539RG4 58 1350/1000 53.1”/39.3” 16.3” 24.0” 581RE4 32 1100/0750

7,040 6.33”/6.65” x 1.85” 43.3”/29.5”

1.7”12.9” 19.1” 387

3ARE4 32 1200/0850 47.2”/33.4” 14.6” 21.8” 407RE4 32 1350/1000 53.1”/39.3” 17.0” 26.0” 438Power Range - mainly on mounted forklift trucks for one sided loadingRE4 25 1100/0750

5,500 6.33”/6.65” x 2.2”43.3”/29.5”

1.7”14.6” 20.7” 407

2ARE4 25 1200/0850 47.2”/33.4” 16.3” 23.5” 433RE4 25 1350/1000 53.1”/39.3” 19.0” 27.6” 473RE4 35 1100/0750

7,700 6.33”/6.65” x 2.2”43.3”/29.5”

1.7”13.8” 19.6” 431

3ARE4 35 1200/0850 47.2”/33.4” 15.5” 22.3” 458RE4 35 1350/1000 53.1”/39.3” 18.1” 26.4” 499RE4 45 1100/0750

9,900 6.33”/6.65” x 2.2”43.3”/29.5”

1.7”13.8” 19.6” 431

3ARE4 45 1200/0850 47.2”/33.4” 15.5” 22.3” 458RE4 45 1350/1000 53.1”/39.3” 18.1” 26.4” 499RE4 58 1100/0750

12,760 6.33”/6.65” x 2.4”43.3”/29.5”

1.9”12.5” 17.9” 524

4ARE4 58 1200/0850 47.2”/33.4” 14.1” 20.4” 550RE4 58 1350/1000 53.1”/39.3” 16.6” 24.3” 594RE4 32 1100/0750

7,040 6.33”/6.65” x 1.9” 43.3”/29.5”

1.7”12.5” 17.9” 524

3ARE4 32 1200/0850 47.2”/33.4” 14.1” 20.4” 550RE4 32 1350/1000 53.1”/39.3” 16.6” 24.3” 594

Remarks•Minimum operating pressure 1450 PSI, maximum 3625 PSI.• Capacities shown are nominal.• Other capacities and dimensions on request.• The capacities shown apply to the telescopic forks and not the lift truck.• All forks have a 0.23” thick integrated wear plate (400 HB) under the complete outer sleeves for longer life span. • The lift truck manufacturer must determine the combined KOOI- REACHFORKS® fork and lift truck capacity.• MSE-FORKS reserves the right to modify and improve their products without prior notice being given.• Foroptimalspeedandminimumlossofpressuretherecommended minimum hose diameter is 0.31”. • Incold-storageapplicationsKOOI-REACHFORKS® can be used down to -22.0 degrees Fahrenheit, contact your dealer.

Specifications and options

Remarks • TheExtensionRangeneedsaminimumoverlapof15.7” (retracted length-stroke). • TheSlimRangeneedsaminimumoverlapof17.7” (retracted length-stroke) . • Foroptimalspeedandminimumlossofpressurethe recommended minimum hose diameter is 0.31”. • Incold-storageapplicationsKOOI-REACHFORKS® can be used down to -22.0 degrees Fahrenheit, contact your dealer. • Capacitiesgivenarefornormalcircumstances. For extreme applications contact your dealer. •MSE-FORKSreservestherighttomodifyand improve their products without prior notice.

Slim Range - mainly included on multi-pallet handlersModel Capacity on

24” (lbs)

SectionD1/D2 x S

(in)

Length / Stroke(in)

Lost Load Thickness

(in)

CoG1 (in) +/-

CoG2 (in) +/-

Weight (lbs)

+/-

ISO/FEM

RE2 27 1150/0700 5,940 3.18”/3.50” x 2.5”

45.3”/27.6”2.3”

17.5” 24.8” 2342ARE2 27 1250/0800 49.2”/31.5” 19.2” 27.7” 250

RE2 27 1400/0950 55.1”/37.4” 22.2” 34.0” 270RE2 37 1150/0700

8,140 3.18”/3.50” x 2.8”45.3”/27.6”

2.3”16.4” 22.6” 292

3ARE2 37 1250/0800 49.2”/31.5” 18.3” 25.5” 307RE2 37 1400/0950 55.1”/37.4” 21.1” 29.7” 333Extension Range - mainly on counterbalance and reachtrucks for variable lengths and dual pallet handlingREE2 17 0800/0400 31.5”/15.7”

1.6”8.5” 9.4” 198

REE2 17 1000/0200 3,740 5.03”/5.03” x 1.6” 39.4”/ 7.9” 11.4” 12.2” 231 2AREE2 17 1200/0800 47.2”/31.5” 14.8” 19.5” 255REE2 24 0800/0400 31.5”/15.7”

1.7”8.7” 10.8” 229

REE2 24 1000/0200 5,280 5.16”/5.16” x 1,7” 39.4”/ 7.9” 11.8” 12.8” 266 2AREE2 24 1200/0800 47.2”/31.5” 15.2” 20.1” 297RGE2 20 0800/0400

4,400 5.16”/5.16” x 2.2” 31.5”/15.7”

1.7”9.3” 11.6” 249

2ARGE2 20 1000/0200 39.4”/ 7.9” 12.8” 13.8” 286RGE2 20 1200/0800 47.2”/31.5” 15.7” 20.5” 319RGE2 30 0800/0400

6,600 5.16”/5.16” x 2.2” 31.5”/15.7”

1.7”8.7” 10.8” 268

3ARGE2 30 1000/0200 39.4”/ 7.9” 11.8” 13.0” 317RGE2 30 1200/0800 47.2”/31.5” 15.7” 21.5” 328

Extension Range Telescopic forks can be used as extension forks for handling 4-way pallets on the long or short side for example.

Special ISO standard for Telescopic forksMSE-FORKS confirms that all their hydraulic telescopic forks comply fully with ISO 13284. This means that all inner sections of the Telescopic forks are tested to 3 times their rated capacity. In addition all outer forks are also tested to 3 times their rated capacity. Finally a random selection of forks are subjected to a dynamic endurance test of 1.000.000 cycles with an overload of 25% which complies to ISO 2330 (fork arms).

45.2” 49.2” 53.1” 57.0” 61.0” 64.9” 68.8” 72.8” 220 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20440 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20660 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20880 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 201100 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 201320 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG2 201540 RG2 20 RG2 20 RG2 20 RG2 20 RG2 20 RG4 25 RG4 25 RG4 251760 RG2 20 RG2 20 RG2 20 RG2 20 RG4 25 RG4 25 RG4 25 RG4 251980 RG2 20 RG2 20 RG4 25 RG4 25 RG4 25 RG4 25 RG2 30 RG2 302200 RG2 20 RG4 25 RG4 25 RG4 25 RG2 30 RG2 30 RG2 30 RG4 352420 RG4 25 RG4 25 RG4 25 RG2 30 RG2 30 RG4 35 RG4 35 RG4 352640 RG4 25 RG4 25 RG2 30 RG2 30 RG4 35 RG4 35 RG4 35 RG4 452860 RG4 25 RG2 30 RG2 30 RG4 35 RG4 35 RG4 45 RG4 45 RG4 453080 RG2 30 RG2 30 RG4 35 RG4 35 RG4 45 RG4 45 RG4 45 RG4 453300 RG2 30 RG4 35 RG4 35 RG4 45 RG4 45 RG4 45 RG4 45

Load center of Telescopic forks (in)

Palle

t wei

ght (

lbs)

Table 1

Always round the capacity required up to the next model in the range. In the example above you would need the RG4-25-1400/1050. You can also use Table 1 to determine the Telescopic fork model you require.

Table 2

Indication of residual capacity for the most common Telescopic forks. Lift truck manufacturer always needs to confirm measurements.

Model: RG2 20 RG2 20 RG2 20 RG4 25 RG4 25 RG4 25 RG4 25 RG2 30 RG2 30 RG4 35 RG4 35 RG4 45 RG4 45Lifttruckcap.(lbs) 2640 3520 3960 3520 3960 4400 4400 4400 5500 4400 5500 6600 7700Lifttruckx(in) 13.7 13.7 13.7 13.7 13.7 13.7 19.6 19.6 19.6 19.6 19.6 19.6 19.6LC24.0” 2090 2882 3267 2057 2838 3234 3674 3630 4642 3674 4620 4796 6666LC53.1” 1133 1573 1793 1111 1540 1760 2145 2189 2706 2145 2739 3333 3916LC57.0” 1045 1463 1650 1012 1430 1628 2013 1991 2530 2002 2574 3135 3696LC68.8” 869 1210 1397 825 1177 1364 1694 1683 2145 1738 2233 2673 3157LC72.8” 825 1166 1331 792 1133 1298 1628 1617 2079 1606 2090 2552 3014 Table 2 gives a rough indication of the residual capacity of your lift truck in combination with our KOOI-REACHFORKS®. Please be aware that the lift truck manufacturer always needs to confirm the measurements of residual capacity.

Formula to determine the measurements of the KOOI-REACHFORKS®

T = total dept (in)W =maximumweightofpallet(lbs)D = dept of pallet (in)A = space between the pallets (in)O = standard overlap 13.7” LC1 =loadcenterretracted24”

Formuleretractedlength(in)(L): (T-O)/2+OFormulestroke(inch)(K): L–OFormuledistancepalletstops(in)(YD): L-DFormuleloadcenterextented(in)LC2: T-(0,5xD)FormulecapacityTelescopicforksRG: WxLC2/LC1

Example:

D = 47.2”T =D+A+D 96,5”W = 1760lbsA = 1.96”

L (96.5”-13.7”)/2+13.7” =55.1”K 55.1”- 13.7” = 41.3”YD 55.1” - 47.2” = 7.8”LC2 96.5”-(0.5x47.2”) =72.8”Capacity 1760 lbs x 72.8” / 24” = 5425 lbs

For an online calculation tool, visit:www.mse-tools.com

D W TD A W

A

T

Over many years MSE-FORKS has acquired a great deal of

knowledge enabling to offer KOOI-REACHFORKS® with spe-

cific customer options.

Palletstops• Y1palletstopsareintendedtostoptheforksprotruding

too far through the pallet, thus preventing

damage to goods and pallets standing behind.

• Y2palletstopsservethesamepurposeandcanalsobe

used to support a separate load back rest.

• Y3palletstopssupporttheloadandallowfrequent

repositioning of the forks on the carriage.

Width Width Height under side upper side 27.5” 27.5” 47.2” 27.5” 39.3” 47.2” 28.5” 39.3” 47.2”

Extra wear protectionExtra protection can be added to the forks. High-grade steel

sections can be welded under the complete length of the

forks or incorporated into the nose.

Load back restThe load back rest supports the load and moves forward

with the outer fork. It is bolted onto the Y2 palletstops but

still allows the distance between the forks to be changed.

MSE-FORKS supplies two types of load back rests, namely

a standard design and a load back rest for reach lift-trucks.

When the load back rest is used, the effective length of

the telescopic forks is redu-

cedby1”.Wherepossible the

pallet stops should be moved

back 1” to prevent this.

Standard options

Special mountingsSpecial mountings such as fork positioners and fork

spreaders are the result of the considerable experience we

have acquired over the last 20 years. Our engineering depart-

ment can change all your 2D drawings into 3D models. 3D

modelling enables measurements to be adapted for use with

other specifications.

Camera systemMSE-FORKS is working together with the Dutch manufactu-

rer of industrial camera-systems Orlaco Products b.v. The

miniature camera is completely integrated on side of one

the telescopic forks. The advantage of this system is that the

driver of the lift-truck is able to see how the ReachForks are

positioned in all circumstances. This is particularly helpful

to the driver in double-deep stacking application making the

operation safer and more efficient.

Mast height extensionThis unique mast extension range is designed to

adjust the height of a standard lift-truck mast. This is

especially useful if the existing mast does not comply with the

requested height. The mast extensions enable lift-trucks to be

enhanced with an additional telescopic boom. The same lift-

truck can then handle extra pallets at a higher level without a

larger load centre being required.

Standard options Other Product

Load positioning systemsIf the side-loader lift truck is operating on rough ground,

one of the forks can compensate for the difference in height

ensuring the safe loading and unloading of goods. Damage

or is reduced and the risk of load slipping off the forks is

decreased. This powerful attachment is sold under the name

Single Height Shift. Also possible in combination with KOOI-

REACHFORKS®.

Manually extendible slide-on fork extensionsUsing special sheet metalworking techniques, a slide-on

extension has been created that is partially open along its

lower surface, but has the characteristics of a closed sleeve.

Mountable telescopic Jib cranesThe Jib crane is provided with a loading hook. By using the

deep bore technology, the portable arm can move in and out

hydraulically from the driver’s seat. All hydraulic parts are

integrated cannot be damaged. Jib cranes can be delivered

with fork pockets and mounting hooks.

ISO 9001-2008Model for quality assurance in design/development,

production, installation and servicing.

ISO 13284Fork arm extensions and Telescopic fork arms. Technical

characteristics and strength requirements. (Safety factor of

3 at all times).

ISO 2328Hook on type fork arms and fork carrier. Mounting dimensions.

ISO 4406Hydraulic fluid power - Fluids Method for coding level

of contaminations by solid particles.

ISO 3834-2Quality requirements for welding. Fusion welding of metallic

materials.

CEEuropean Machinery Directives 2006/42/EC

Palletless handling?Since 2003 MSE-FORKS has introduced a new patented system

the so-called RollerForks® which can be used for palletless

container handling. For more information please visit our

website www.slip-sheet-attachments.com

Production and safety standardsMSE-FORKS requires its KOOI-REACHFORKS® to be of the

highest quality and we can only guarantee this by complying

with all applicable international standards:

MSE-FORKS, Inc.131 Franklin Plaza, Suite 335, Franklin, NC 28734Tel: (828) 349-9619www.mse-forks-inc.cominfo@mse-forks-inc.com

MSE-FORKS B.V.Oudebildtdijk 8949079NG Sint JacobiparochieTel: +31(0)518492929 www.mse-forks.cominfo@mse-forks.comInnovative Logistic Products