telecommunication products catalog - kairos€¦ · 9 ip routing: tcp, udp, icmp, arp 10 dhcp...
TRANSCRIPT
Contact us at [email protected] Telephone : 021 5824049/ 97998548
Telecommunication Products Catalog
4G LTE Router
WR100Plus
Product Key Feature
Support IEEE 802.11b/g/n Strong local network router with features of DHCP, DNS and NAT/NAPT Routing from WAN to LAN Basic Gateway features such as NAT, DHCP, and DNS. Etc, to provide the capability to construct private
network. Firewall Support VPN and path through Support 802.1x Support SPI IP filter, IP forwarding, IP QoS Web-based GUI Support LTE
Protocol & Features Supported
1 RFC 2684 IP Bridging 2 RFC 2684 IP Routing 3 RFC 2516, PPPoE (Point over Ethernet) over
4 Routing: RIP v1, RIP v2 5 Support Static Routing 6 NAT & PAT (RFC 1631) 7 DMZ support 8 NAT with Application Layer Gateway(FTP,TFTP ,L2TP,PPTP,IPSEC...) 9 IP Routing: TCP, UDP, ICMP, ARP 10 DHCP Client/Server for IP management 11 DHCP Relay
General Specification & Operational requirement
1 Support in Windows 98, Windows 2000, Windows XP, Windows Vista, Linux, Apple and Mac OS for Ethernet
2 System Log
3 Password & user ID may have special character
4 IPV4
Applicable for 1 port WiFi Mode
1 Wireless Standard and feature - 802.11g/802.11b/802.11n
2 64/128 bit WEP support
3 MAC association control
4 WPA with pre shared keys
5 Support Multiple SSIDs
6 Dynamic WEP Key
7 Support for WPA,WPA2, WPA PSK, TKIP
8 Support 802.1X
WR100
Introduction
Router can connect to computer both by 4 Ethernet Ports and Wireless. And it also implements Voice call function by 1 RJ11 port. It is an ideal device for broadband wireless access. And could support IEEE 802.11b/g/n, Users could enjoy high speed steadily. In security, it supports all of the Wireless Transfers Encrypt Protocol.
It supports voice by integrated LTE module. It is the best choice of telecommuting、SOHO and family.
1.2 Product Key Feature
1. Support IEEE 802.11b/g/n
2. Strong local network router with features of DHCP, DNS and NAT/NAP
3. Routing from WAN to LAN
4. Basic Gateway features such as NAT, DHCP, and DNS. Etc, to provide the capability to construct private network.
5. Firewall
6. Support VPN and path through
7. Support 802.1x
8. Support SPI
9. IP filter, IP forwarding, IP QoS
10. Web-based GUI
11. Support LTE
Hardware Interfaces
■Four RJ-45 ports for 10/100 Base-T Ethernet LAN connection to PC or Ethernet WAN port (configuration by software)
■1 LTE external main-antenna , 1 LTE internal sub-antenna
■2x2 Wi-Fi internal antenna
■One RJ11 ports for connecting to normal desk phone
■One Reset button to default setting
■One Power jack
■One Power switch
■One WPS button
■One S(U)IM card slot
Protocol & Features Supported
1 RFC 2684 IP Bridging
2 RFC 2684 IP Routing
3 RFC 2516, PPPoE (Point over Ethernet) over
4 Routing: RIP v1, RIP v2
5 Support Static Routing
6 NAT & PAT (RFC 1631)
7 DMZ support
8 NAT with Application Layer Gateway(FTP,TFTP ,L2TP,PPTP,IPSEC...)
9 IP Routing: TCP, UDP, ICMP, ARP
10 DHCP Client/Server for IP management
11 DHCP Relay
12 DHCP option 60/77
13 Pass through/open/redirection and port mapping
14 The Range of private IP support 192.168.1.2 to 192.168.1.254
15 QoS mechanism support for mapping of IP packet content
16 HTTP (web based) for firmware upgrade & configuration
17 IP filtering & raw filtering
18 IGMP Proxy support
19 IEEE 802.1D Spanning tree
20 DNS relay
21 Support voice function by connecting normal desk phone
3G Fixed Wireless Phone
3G Fixed Wireless Cordless phone with WiFi MW40
3G cordless phone, Wifi Router function, WCDMA HSPA MW40 is a handheld phone which can support HSPA 850/900/1900/2100MHz, EGSM/GPRS 900/1800
MHz and 850/1900Mhz are optional. It provides up to 7.2 Mbps downlink, up to 5.76 Mbps uplink. WIFI
router function is optional. MW40 is a medium end handheld phone with QCIF TFT LCD and a charging
base.
3G Fixed Wireless Phone MW-34
WCDMA/HSPA850/1900/2100MHz GSM/GPRS 850/900/1800/1900Mhz Data HSDPA 3GPP Release 5 Compliant @7.2Mbps HSUPA 3GPP Release 6 Compliant @5.76Mbps
3G Fixed Wireless Phone MW-33
WCDMA/HSPA850/1900/2100MHz GSM/GPRS 850/900/1800/1900Mhz Data HSDPA 3GPP Release 5 Compliant @7.2Mbps HSUPA 3G
3G Fixed Wireless Phone MW-36W
Platform: Qualcomm MSM6290 RF band: GSM850/900/1800/1900aa HSPA/UMTS Data Rate: HSUPA downlink up to 7.2
WCDMA DESKTOP PHONE MW-39
With its desktop idea, our wireless desktop phone is designed for home and office use. It can be used
anywhere only if there is a base station around, esp. in rural areas, no cable needed. With its external
antenna connector, big antenna with high gain can be used when the signal is poor and the normal
mobile phones cannot be used. With SMS & voice function, 3G data is optional.
3G WCDMA/HSPA Phone MW-40
3G WCDMA Fixed Wireless Phone MW-40 is a 3G wireless fixed phone which supports HSPA
850/900/1900/2100MHz, EGSM/GPRS 850/900/1800/1900MHz. It can provide up to 7.2 Mbps
downlink, up to 5.76 Mbps uplink. MW-40 is a medium end wireless fixed phone with 2.4 QVGA TFT LCD.
3G Fixed Wireless Terminal
3G/GSM Terminal W-800
The MG-W800 high-speed home gateway is an All-In-One solution featuring multi-functions
Features and Technical Specifications
HSDPA/WCDMA Standards
HSUPA/HSDPA/UMTS 2100/1900/900/850 MHz, GSM/GPRS/EDGE 850/900/1800/1900 MHz
HSPA Equalizer and receive diversity
HSUPA data service of up to 2 Mbps
HSDPA data service of up to 7.2 Mbps
UMTS PS domain data service of up to 384 kbps
EDGE packet data service of up to 236.8 kbps
GPRS packet data service of up to 85.6 kbps
WCDMA/GSM voice service
Configurations
Payload Encapsulation
RFC 2516, PPPoE (PPP over Ethernet)
RFC 2364, PPPoA (PPP over AAL5)
RFC 2684, Bridge
RFC 2684 Routed
Support 8 PVCs
Support Port Mapping
IP
NAT/NAPT
Firewall, support SPI (Stateful Packet Inspection)
DHCP Server
Port forwarding (Support DMZ)
IP filtering, bridge filtering, web filetering
Static routing
Dynamic routing;
SNTP;
VPN, support PPTP;
Multicast: IGMP Proxy/Snooping;
ALG;
Ethernet
IEEE 802.3;
4 port Ethernet: 10/100M Ethernet Auto MDI-X;
WiFi
IEEE 802.11 b/g/n compliance;
Security: WEP 64/124/256 bits, WPA/WPA2;
WMM QoS;
WDS wireless AP;
RF power: 20dBm;
Transmission Power:
802.11b: 16+/-1.5dBm;
802.11g: 14+/-1.5dBm;
802.11n: HT20 16+/-1.5dBm; HT40 14+/-1.5dBm;
Reception Sensibility:
802.11b: -82dBm, ±2dB;
802.11g: -68dBm, ±2dB;
802.11n: HT20 -64dBm, ±2dB; HT40 -60dBm, ±2dB;
Spurious emission/harmonics: -50dBc;
Antenna:
2T2R MIMO mode (2 transmitter, 2 receiver);
One external antenna with 2dBi gain; One internal antenna with 4dBi gain;
Operating Temp: -10~+60°C;
RF on/off;
ACS(Automatic channel selection);
MAC address white-black filter;
Supports build-in HSDPA/WCDMA wireless module with speed up to 7.2Mbps.
Build-in 802.11n enhanced WLAN complies with IEEE 802.11n draft v2.0 and backward to 802.11b/g specifications. It supports 2x2 MIMO and up to 300Mbps of rate bandwidth. The throughput of WLAN to LAN is more than 100Mbps;
Optional support ADSL2/2+ for broadband connection via existing telephone line;
One USB 2.0 host interface could also used for printers, mobile hard disks and NAS device connecting without PC;
One FXS port for VoIP call;
Supports TR-069 remote management
VoIP
Support SIP or MGCP protocols
Support one analog phone
Flexible dial plan customization
Support multiple CODECs, including G.711, G.729 and so on
Supports DTMF tone detection and generation
Support Echo Cancellation, Silence suppression, Comfort Noise Generation and Voice Activity Detection(VAD)
SIP Call Forwarding
T.38 Fax Relay
3G WCDMA Terminal FCT-356 3G WCDMA FWT Supporting HSUPA/HSDPA/UMTS/EDGE/GPRS/GSM 3-band HSPA/UMTS 850/1900/2100
4-band EDGE/GPRS/GSM 850/900/1800/1900
Features: 1. Based on WCDMA 2. Can connect to PBX 3. Support connect with Internet 4. Can lock SIM card 5. Support Caller ID 6. Making & answering calls after connecting to telephone set. 7. 2RJ-11 ports can support connect with extension
Technical Parameters: Multimode operation: HSUPA/HSDPA/UMTS/EDGE/GPRS/GSM Triple-band: HSPA/UMTS 850/1900/2100 MHz Quad-band: EDGE/GPRS/GSM 850/900/1800/1900 MHz HSUPA uplink up to 2.0 Mbps HSDPA downlink up to 7.2 Mbps WCDMA (UMTS) uplink data rate up to 384 kbps EDGE data up to 237 Kbps DL and 118Kbps UL, 3GPP Release4, class 12 GPRS data up to 85.6 Kbps DL and 42.8 Kbps UL
Power Supply: DC5 V Output Power: Class 3 for UMTS/HSDPA/HSUPA Class 4 for GSM 900 Class 1 for GSM 1800 Class E2 for EDGE 900/1800 USB: USB 2.0 Full Speed Antenna Gain: >1.5dBm
Environmental Operating Temperature: -10 ~ +55°C Storage Temperature: -40 ~ +80°C RJ-11 phone interface: Dialing tone frequency 450Hz On hook voltage: 45V Off hook current: 30mA/41mA
3G Fixed Wireless Terminal FCT-355 This device has 3 work modes: GSM only, PSTN only and PSTN/GSM
GSM only mode: A “GSM” mark will be displayed on the top right corner of LCD. User can only dial and
receive calls from GSM only under this mode.
PSTN mode: A “PSTN” mark will be displayed on the top right corner of LCD. User can only dial and
receive calls from PSTN line only under this mode.
PSTN/GSM mode: A “PSTN/GSM” mark will be displayed on the top right corner of LCD. User can dial out
either from PSTN or GSM under this mode. When user has set GSM prefix number, the calls will switch
to GSM routing automatically as a least lost router.
Features
Conversion of wire & wireless communication Auto-select economic route (LCR) With LCD display for easy programming Code Conversion Setting: Through the connection towards local PSTN line, the phone calls will
proceed with code-transfer dialing process Volume modulating setting (1 - 5) Polarity reversing function and 12 KHz built in (optional) Definition of DTMF reversing signal Limit of communicating time GSM function of dialing out the prompt voice When not connecting to Telephone Office line, GSM will provide the forced dial-out function Set up GSM extra dialing local code Set up extra dialing local-code to PSTN GSM isn't ready, call will be forced to dial out from PSTN Setting of Dialing type Call-Transfer:
PSTN TO GSM, GSM TO PSTN, GSM call-Transfer setting time to PSTN out, DTMF definition of reversed signal
GSM Frequency bands: Dual Band EGSM 900 and DCS 1800 MHz GSM 850/900/1800/1900 MHz (optional)
Specific Call Transfer setting: GSM to PSTN: Assign mode (one stage dialing) and Free mode (two stage dialing) PSTN to GSM: An Incoming call will be transferred to specify GSM Number
Call Transfer Restriction Setting (10 sets) Short Code Setting (100 sets) GSM Prefix Number Setting (30 sets) Support Call ID ( DTMF) Siemens TC-35 GSM Module SIM Card Pin code disable/enable
3G WiFi Router
3G WiFi Router WR-89V, 90V
3G+4 Ethernet Ports + 1FXS+WLAN(802.11n) It support voice by integrated 3G module.(7.2Mbps HSUPA OR 21Mbps HSPA+ The model Name list is Following: WR-90V:HSPA+21Mbps WiFi 300Mbps WR-89V:Hsupa 7.2 Mbps WiFi 300Mbps
Key Features:
Support IEEE 802.11b/g/n 3G ROUTER is a strong local network router with features of DHCP, DNS and NAPT. Routing from WAN to LAN Basic Gateway features such as NAT, DHCP, and DNS. Etc, to provide the capability to
construct private network. Firewall Support VPN Support IPsec VPN Support 802.1x Support SPI IP filter, IP forwarding, IPQoS Web-based GUI Optional Support EVDO(REV.A),TD-SCDMA,WCDMA(*according to 3G module type)
Hardware Interfaces: Four RJ-45 ports for 10/100 Base-T Ethernet LAN connection to PC One 3G external antenna One Reset button to default setting One Power jack One Power switch One Wireless internal antenna (option) One S(U)IM Card slot One the internal interface of Mini PCI-Express(*according to 3G module type)
Dual-SIM HSPA WR-401 The HSPA Industrial Router (WR-401) is an industrial-grade cellular router that integrates both wireless data transmission
Specification:
Supported Network/Technology Quad-band HSPA+/HSUPA/HSDPA/UMTS 850/900/1900/2100 MHz & Quad-band GSM EDGE/GPRS
850/900/1800/1900 MHz
Max. Data Speed
HSDPA - Download: 7.2Mbps / Upload: 384kbps
HSUPA – Download: 14.1Mbps / Upload: 5.76Mbps
HSPA+ - Download: 21Mbps / Upload: 5.76Mbps
Interface
Power interface: 100~240 VAC, 50/60 Hz to 12VDC, 1A Ethernet interface: 1 x WAN + 4 x LAN, 10/100M RJ45 ports
Antenna for 3G: SMA connector, magnetic-stand type 2 ejectable SIM slots
2 LED indicators: Power and link status
Function
Support user-friendly Web-based GUI Firmware upgradeable via browser
Logs for traffic & events QoS NAPT
DHCP server DNS relay
VPN (support IPSec protocol, 3DES encryption algorithm, key length management via DH algorithm, authentication via preshared password & MD5 algorithm, Intranet/Extranet VPN)
Casing Optimized electromagnetic compatibility and heat extraction performance
Power Consumption 12W
Security Stateful Packet Inspection (SPI) firewall
Temperature Range Operation: -20°C ~ +70°C / Storage: -40°C ~ +85°C
Relative Humidity Range ≤ 95% (non condensing)
Dimensions 160mm X 150mm X 37mm (not including antennas)
Weight 800 g
Package Content HSPA Industrial Router, AC/DC adaptor, 1.5m CAT-5 Ethernet cable and 2 detachable antennas
Warranty Period 1 year
Power Bank +WiFi Router MBA1 Battery: Built-in 1800mAh rechargeable Li-on battery, last up 4 hours of usage
Main features:
1. Battery: Built-in 1800mAh rechargeable Li-on battery, last up 4 hours of usage(per full
charge)
2. Power bank: Supplies power to electronic products( iPhone/iPod/iPad, Smart phone) via USB
3. Automatically recognize ADSL/DHCP and WAN/LAN without any preset profile
4. Complies with IEEE802.11b/g/n standards and data speed rate up to 150Mbps
5. Compatiable with HSDPA/HSUPA/HSPA+, CDMA EVDO Rev A/B USB modem
6. Auto Access Point Name(APN), Dial-up 3G/4G automatically
7. Iphone tethering: connects iPhone and shares internet connectivity, Support Wifi access
8. Multiple power supply: Recharges its battery over power adaptor, Car charger or PC via USB
cable
9. Plug and Play, no need install any software, suitable OS( Android, Mac, Windows, Linux)
WiFi
Frequency Band 2412-2483MHz
802.11b/g/n Up to 150Mbps
Data Transmission Speed "802.11b: 1, 2, 5.5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n:150Mbps
Encryption OPEN,SHARED,WEPAUTO,WPA-PSK,WPA2-PSK,WPA,WPA2,WPA-PSK/WPA2-
PSK,WPA/ WP
WPS Supported (Software)
User amount max. to 20 WiFi users
Antenna
WiFi Antenna 1, Internal, External Interface
Micro USB 1, For Power charge
Standard USB 2.0 1. For Data Card/ supply power for smart phone and other mobile devices
RJ45 port 1 WAN(Support DHCP,ADSL,Static IP) or LAN
Fast 3G/WiFi Hotspot MF-120 Hotspot, Portable, Pocket, Multiple devices connecting Internet simultaneously
HSUPA mobile broadband Accessing by WIFI connection
Dimension (LxWxH, mm) 52.5*96*13
HSPA Connectivity Function
GSM Band: 850/900/1800/1900MHz
UMTS Band: 2100/1900/850Mhz
HSxPA Data Rate: Downlink: 7.2Mbps, Uplink 5.76Mbps
UMTS Data Rate: up to 384 Kbps DL and UL
WIFI Connectivity Function
WIFI Connectivity Standard: 802.11b/g/n
Pre-configurable security: Support 64, 128, WEP encryption, 802.1x and WPA/WPA2
authentication
VLAN uplink: Support
Static IP, Bridge, PPPoE: Support
Firewall, IP filter, Port forwarding, IPQoS: Support
DHCP server, NAT, DMZ: Support
UMTS Antenna: Internally embeded antenna
Rx Diversity Antenna: embeded, optional
WIFI Antenna: Internally embeded antenna
Charging Interface: mini USB
SIM slot: Support
Micro SD: Support
Power Supply: Removable Li-ion battery, 1500mAh
Power Indication: support
Network status Indication: Multi-colour status indicator for HSPA, UMTS, EDGE/GPRS
Battery status Indication: support
WIFI/WPS Indication: support
OS supported: Microsoft WindowsTM Vista, XP SP2+, Mac OSX (10.4.X 10.5.X Intel based
CPU), Linux.
Connection Manager
HSPA Connection Status: Network name, signal strength, radio technology, connection
status, connection time, total downlink/uplink byte
Network Profile: Auto APN matching with USIM, APN synchronization
Settings: Auto connect on start up (On/Off), Radio mode selection, etc
Features: Phonebook from SIM contacts, SMS manager, PIN management
User Interface Languages Support
Connection Manager: English
USB Mass Storage
Supported by Micro SD card
Working Time: Standby mode: about 100h, Working mode: 3-5h
Operation Temperature: 0oC to 45oC (32oF to 113oF)
Storage Temperature: -20oC to 65oC (-4oF to 149oF)
3.5G Portable WiFi Router MF-140 MF140 is a product with the function of wireless router, wireless modem and U disk. No matter
who you are, where you are in, MF140 is able to meet your demands of being on the internet,
bring you a big fun.
WAP and WIFI 802.11n wireless standard supported, at most able to support 5 WIFI user at the
same time.
Extensive compatibility with PC, mobile phone, game box, digital camera, WIFI equipment and
so on.
High-speed of being on the internet, the highest speed can get 7.2Mbps.
Long-time standby with 1500Mah battery.
Technical specification:
Device Type- 3G wireless router
Chipset-Qualcomm 7200
Network Type- 3G- HSUPA, HSDPA, UMTS
2G- GSM, GPRS, EDGE
Network mode-dual-mode
Frequency- HSUPA / HSDPA / UMTS- 2100MHz
GSM / GPRS / EDGE-850/900/1800/1900
Data Transfer Rate- maximum 7.2Mbps downlink
Maximum 5.76Mbps uplink
Bus Interface- Mini USB
Memory Card Support- Micro Sd card support up to16GB
Support System- Windows XP, Vista, Windows 7
Other parameters- support WAP and Wi-Fi 802.11b / g, can support 5 Wi-Fi device connection,
Support WEP/WPA-PSK/WPA2-PSK other encryption ,built-in battery can provide For 2hours
longlife
Other features-set wireless router, wireless card, U disk in one
Multi HSPA+ MIFI Router MF-170 MF-170 is the HSPA+ pocket hotpot, which provides up to 21.6Mbps downlink, up to 5.76Mbps uplink. Users can surf internet anywhere and anytime when 3G network covered. The powerful router function which supports for 10 WiFi devices can help users to enjoy their network sharing life. Main Features: Support for HSPA/UMTS Tri-band HSPA/UMTS 2100/1900/850MHz Quad-band EDGE/GPRS/GSM 850/900/1800/1900MHz Access HSPA+ (21.6Mbps download and 5.76Mbps upload) intelligent pocket hotpot. Users can share the high speed network anywhere and anytime when 3G network covered. Allows up to 10 Wi-Fi enabled devices to connect to the internet. Easily and quickly charge. The device can be charged by PC and adaptor Up to 5 hours continuous and 150 hours standby for battery Integrated high-capacity micro SDHC slot . Provide storage capacity of up to 32GB Hardware and Software Specifications
Baseband Chipset: Qualcomm MDM8200A
WiFi Chipset: Qualcomm WCN1314
NAND+SDRAM Flash:1G+512MB
WLAN Specifications
Standards IEEE 802.11 b/g/n
Servers DHCP/DNS/VPN
Security WEP/WPA/WPA2
Operating Frequency
HSPA/UMTS2100MHz: 1920MHz~1980MHz(Uplink)/2110MHz~2170MHz(Downlink)
HSPA/UMTS1900MHz: 1850MHz~1910MHz(Uplink)/1930MHz~1990MHz(Downlink)
HSPA/UMTS850MHz: 824MHz~849MHz(Uplink)/869MHz~894MHz(Downlink)
GSM/GPRS/EDGE 850MHz: 824MHz~849MHz(Uplink)/869MHz~894MHz(Downlink)
GSM/GPRS/EDGE900MHz: 880MHz~915MHz(Uplink)/925MHz~960MHz(Downlink)
GSM/GPRS/EDGE1800MHz: 1710MHz~1785MHz(Uplink)/1805MHz~1880MHz(Downlink)
GSM/GPRS/EDGE1900MHz:
1850MHz~1910MHz(Uplink)/1930MHz~1990MHz(Downlink)
Network Supported
HSPA/UMTS 2100/1900/850 MHz (Rx Diversity in WCDMA2100MHz)
GSM/GPRS/EDGE 850/900/1800/1900MHz
Software Specifications
HSPA+ DL 21.6Mbps UL 5.76 Mbps
HSPA+ DL14.4 Mbps UL 5.76Mbps
HSPA DL 7.2Mbps UL 5.76 Mbps
UMTS DL/UL 384 kbps
GPRS DL 85.6 kbps / UL 42.8 kbps
EDGE 3GPP R4, Category 12, DL 237k bps / UL 118K bps
HSPA Portable Router MF-180 Specification: HSPA Connectivity Function GSM Band 850/900/1800/1900 MHz UMTS Band 2100/1900/850 Mhz HSxPA Data Rate DL 21 Mbps, UL 5.76 Mbps UMTS Data Rate DL and UL up to 384 Kbps
Specification:
HSPA mobile broadband accessing by WIFI connection
Dimension (LxWxH, mm) 100x50x15.5mm
HSPA Connectivity Function
GSM Band 850/900/1800/1900 MHz
UMTS Band 2100/1900/850 Mhz
HSxPA Data Rate DL 21 Mbps, UL 5.76 Mbps
UMTS Data Rate DL and UL up to 384 Kbps
Chipset Modem MT6280 WIFI MT5931
WIFI Connectivity Stand 802.11b/g/n
Pre-configurable Security Support OPEN/WPA2 PSK
DHCP Server Support
WIFI Access User Support up to 8 wireless users
Antenna UMTS Antenna Internally embeded antenna WIFI Antenna 1*1 Internally embeded antenna
Diversity Antenna Tri-Band (Support UMTS 2 HighBand and 1LowBand)
Charging Interface MicroUSB
USIM Card Slot Support
Micro SD Support, up to 32GB
Power Supply Removable Li-ion Battery, 2000mAh
Key Power Key Support Connect Key Support Reset Key Support
Display 0.9' OLED,128X64 Pixels
Network Status Indication Network Name, Signal Strength, Connection Status, Roaming Status
HSPA Connection Status Connection Time, Total Downlink/Uplink Bytes
Battery Status Indication Support
WIFI Indication Support
WEB Administration
Settings Auto APN matching with USIM,Radio Mode Selection, Manual Search etc
PIN Management Support
Operating System Supported Microsoft WindowsTM7/WindowsTM8, Vista, XP SP2+, Mac OSX (10.5+),
Linux(Optional)
Signal Booster / Repeater
3G/GSM Dual Band Repeater SCP-5055 All 2G / 3G / HSPA / HSPA+ system compatible (iDEN excluded)
GSM+3G Dual band signal booster/repeater
3G + GSM Indoor Booster/repeater DIY kits ; GSM+3G dual-band signal Booster & repeater
1. ALL 2G/3G/ HSPA/ HSPA+ system compatible (iDEM excluded).
2. Cellular + PCS band operation severs AT&T , Verizon, Cingnlar, T-mobile, sprint
3. DIY Kit, All accessories included.
4. Loop oscillation Alarm Indication.
5. Coverage :3000ft2(300m2),5000ft2(500m2),(by using optional antenna).
6. OEM/ODM negotiable.
Cell phone system GSM850/1900 CDMA800/1900, WCDMA 850/1900.
UPLINK Cellular 824-829 Mhz 1850-1910 Mhz
Downlink 869-894 Mhz 1930-1990Mhz
Bandwidth Cellular 25 Mhz 60MHz
Gain Uplink 50dB/Downlink 50dB (cellular band)
Uplink 55dB/Downlink 55dB (PCS band)
Gain Variation 3dB
Noise Figure Uplink 8.0dB / downlink 8.0dB
OICP-3 Uplink 34dBm / downlink 20dBm
P1dB Uplink 26dBm / downlink 12dBm
V.S.Q.R 2.0:1
RF Power output Uplink 17dBm / Down link 2 dBm.
Power supply 90-240VAC 50-60Hz 12.2VDC 1.0A(max).
AGC dynamic 20dB(typ)(both TX,RX port and Cellular, PCS band)
Spurious and IMD -20dBm
MECHANICAL PART
Size dimensions 4.2 x11.5x 19.3 cm( H*W*D)
RF connector Outdoor ANT side F(F) , indoor ANT side:TNC(F)
Weight 0.7kg(appro.)
Case material ABS plastic material FR94VO
Installation Wall or ceiling mount or set on the cabinet
Operation Temp -5C-+50C
3G/GSM Booster MU/MG/MD-40 The MAXCOMM Mini Indoor Repeater/ Booster is ideally suitable for providing and/ or improving cellular reception not only voice, also high data rate communication like HSPA/ HSPA + ( MOBILE Internet). its superior amplication and high quality, intuit installation makes DIY easily by the end user which is suitable for home, house, coffee shop, etc.
Features: 1. DIY kit, All accessories included 2. Coverage : 70 squared meter ~150 squared meter or more 3. OEM/ODM negotiable Frequency Range Uplink /Downlink 1920~1980MHz/2110~2170MHz Bandwidth 60MHz Gain: Uplink/ Downlink 40/42 dB Gain Variation 2dB Noise Figure Uplink/ Downlink 8.0/8.0 dB OICP-3 Uplink/ Downlink 28/12 dBm P1dB Uplink/ Downlink 20/4 dBm RF Power Output Uplink/ Downlink 8/-2dBm Power Supply 90~240VAC 50-60Hz, 12.2VDC 1.0A(max)
Dual Band Repeater SGD/SGU-5055 The Dual Band Indoor Repeater is ideally suitable for providing and /or improving cellular reception not only voice, also high data rate communication like HSPA/HSPA + (mobile internet). Is super amplification and high quality, intuit installation makes DIY easily which is suitable for home. office, coffe shop shop indoor.
Feature:
1.GSM/DCS full dual band operation (SGD-5055)
2.2G/3G/HSPA/HSPA+ full dual band operation (SGU-5055)
3.DIY Kit, All accessories included
4. Coverage : 3000 ft2 (300 m2), 5000ft2(500m2)( by using optional antenna)
WiFi repeater WR-2427S(0.5W) The Maxcomm WiFi indoor Repeater WR-2427S(0.5W) is ideally suited dor providing and/or improving WiFi receptio in office, torre, coffee stop and facility Area. It is gain setting with indicator makes the end user very easy to set the repeater at 54 Mbps with maximum indoor coverage.. Compared to the traditional fixed gain Wi-Fi repeater which can not be adjust rhe gain causes
high reception bar, yield low data rate on the notebook computer due to its saturated, non linear output power.
Features:
Gain setting adjustable obtain 54 Mbps and maximum coverage. 802.11 b/g mode compatible.
Linear 0.5w output @OFDM 54Mbps,2500mw EIAP(with 7dB/ ANT)
Specification:
Tx Power: 27 dBm@OFDM54Mbps Tx Gain:15dB (typ.) Tx Gain setting Range : 5 dB Rx Gain: 12 dB Power Supply: 15.5V 0.8A DC
Wi-Fi Repeater Kit including:
Main Unit WR-2427S 30 cm S(M)-S(MR) coaxial cable 15.5V AC-DC adaptor 5dBi Indoor Omni directional Antena
3G USB Modem Data Card
3.5G HSUPA USB Modem U-84 small, lightweight, low power consumption
CE, RoHS compliant
GSM/GPRS/EDGE/WCDMA/HSDPA network
Features:
Air Interface: UMTSHSDPA 2100MHz and Quad-Band GSM/GPRS/EDGE.
(Flexible for Band Iand GSM850/900/1800/1900 by selection the suitable circuitry and RF PA).
Data Services:
GSM CS UL/DL 9.6Kbps
GPRS UL/DL 26.8Kbps/53.6Kbps
EDGE UL/DL 118.4Kbps/236.8Kbps
WCDMA CS UL/DL 64Kbps/64Kbps
WCDMA UL/DL 384Kbps/384Kbps
HSDPA UL/DL 384Kbps/3.6Mbps
PCB Size: 22.5 x 42.8mm, Two PCBs with Board-to-Board connector USB2.0 high-speed (data flow, AT command, traces, etc), Type A connector, SD card (T-Flash card) host interface, supports up to 8GB SD card Antenna: InbuiltAntenna Memory: 256 Mb SDRAM and 1Gbits NAND Flash memory MessageService: SMS (Point-to-PointMO/MTand Cell Broadcast) USIM connector , supports USIM Card 1.8V and 3.0 V Internet Protocols: TCP/IP, UDP/IP, PPP protocol
EVDO CDMA USB Modem CM-450 Multiple applications:Notebook/Netbook, Mobile Internet Device, Wireless Router, USB
Modem, Car Embedded System
The EVDO CDMA 450MHz USB Modem mainly supports the following features
CDMA2000 1XRTT /1XEVDO band class 5, 450MHz
CDMA2000 1XEVDO release A forward link data service of up to 3.1Mbps CDMA2000 1XEVDO release A reverse link data service of up to 1.8Mbps CDMA2000 1XEVDO release 0 forward link data service of up to 2.4Mbps CDMA2000 1XEVDO release 0 reverse link data service of up to 153.6kbs CDMA2000 1XRTT release 0 forward link data service of up to 153.6kbs CDMA2000 1XRTT release 0 reverse link data service of up to 153.6kbs
Hybrid Operation: CDMA2000 1XRTT only, CDMA2000 1XEVDO only, CDMA2000 1XRTT and CDMA2000 1XEVDO
Support 1 way SMS
Personal computer/Smart card (PC/SC) driver Support AT command
Mini PCI Express interface USB 2.0 full speed interface
Windows 2000/ Windows XP/ Windows Vista/ Linux 2.6.20 or above.
3G HSDPA USB MODEM U-83 / 3G & WiFi USB Modem Download 3.6Mbps, CD-Free instalation, Phonebook Function, SMS Function, LED indicator
It is a portable and high speed internet access mode for office and home.
Zero-CDROM and Multi freqbands are convenient for use remarkably.
Technical Standard
HSDPA 3GPP R5, up to 3.6 Mbps DL and 384 Kbps UL,category 5/6
UMTS up to 384 Kbps DL and UL
EDGE 3GPP Release4, class 12, up to 237 Kbps DL and 118Kbp
GPRS GPRS Multislot class 10, up to 85,6 Kbps DL and 42,8 Kbps UL
Frequency Band
GSM/GPRS/EDGE 850/900/1800/1900 MHz
UMTS "2100MHz only 850/1900/2100MHz"
Power Class
WCDMA Power Class 3
GPRS 850/900 Power Class
EDGE 850/900/1800/1900 Power Class E
External Interface
UMTS/GSM Antenna Internal antenna
USB Type standard USB Interface
USB Speed USB 2.0 Full Speed
Power Mode Powered via the USB interface
SIM/USIM Card standard 6 PIN SIM card interface, compaliant with 3GPP 31.101 and
31.102
AT Interface 3GPP TS 27.005/3GPP TS27.007 supported
3G HSUPA USB Modem U-82 / 3G & WiFi USB Modem HSUPA Wireless Modem; GSM Band: 850/900/1800/1900MHz
UMTS Band: 2100/900, 2100/850 or 1900/MHz
HSxPA Data Rate: 7.2M/5.76M D/U
USB Dongle (Modem)Form factor: 80mm(L)x24.5mm(W)x12mm(H)
GSM band: 850/900/1800/1900MHzUMTS band: 2100/900 or 2100//850 or 1900/850MHz
HSxPA data rate: downlink 7.2Mbps; uplink 5.76Mbps UMTS data rate: up to 384 Kbps DL and UL Power Class: WCDMA power class: power class 3EDGE/GPRS: class B, multislot class 10 GPRS power class: power class 4 for 850/900MHz, power class for 1800/1900MHz bandsAntenna: Internally embedded antennaInterface:USB: USB 2.0 Hight Speed SIM slot: yes Plug and play: CD-free installation Operating System Supported:Microsoft Windows Vista, XP SP2+, Max OSX(10.4X Intel
based CPU)
HSPA+ Modem Card U-88+ GSM Band 900/1800 MHz UMTS Band 850/2100MHz or 900/2100MHz or 850/1900MHz HSPA+ Data Rate Downlink:21Mbps, Uplink: 11.2Mbps U88+ HSPA+ Modem Card Specification
Form Factor USB Dongle Dimension (LxWxH, mm) 85.5x25x8.9mm GSM Band 900/1800 MHz UMTS Band 850/2100MHz or 900/2100MHz or 850/1900MHz HSPA+ Data Rate Downlink:21Mbps, Uplink: 11.2Mbps; UMTS Data Rate up to 384 Kbps DL and UL WCDMA power class power class 3 EDGE/GPRS class B, multislot class 12 GPRS power class power class 4 for 850/900 MHz bands, power class 1 for 1800/1900
MHz bands EDGE power class power class E2 for 850/900/1800/1900 MHz bands Auto HSPA - WCDMA - EDGE/GPRS handover Yes
Main Antenna Internally embeded antenna Diversity Optional(2100/850MHz or 2100/900MHz or 1900/850MHz) USB USB 2.0 High Speed SIM slot Yes Power Powered via the USB interface Plug and play CD-free installation Status Indication Dual color(Red/Green) LED indicator 2G/3G Network Status Operating System supported Microsoft WindowsTM 7, Vista, XP SP2+, Mac OSX (10.5/10.6/10.7+ Intel based
CPU),Linux Ubuntu10.4 Connection Manager Plug and play CD-free installation Connection Status Network name, signal strength, connection status, connection time,
total downlink/uplink byte Network Profile Auto APN matching with USIM Settings Radio mode selection(2G/3G/Auto) Features Phonebook from SIM contacts, SMS manager, PIN management
CDMA EVDO USB Modem
3G EVDO USB Modem with WiFi
1. 3G/WiFi double wireless internet experience
2. Support 5 persons to access at the same time
3. USB port to provide power
4. Long-distant coverage area——100 square meter.
5. Web UI to configure settings
Dimension 87.8mm×25mm×9mm
Material PC
Antenna Internal
Solution VIA 7.1T
Band 800/1900MHz
Access mode 3G+WIFI WiFi 802.11 B/G/N
Data rate CDMA 1X EV-DO Rev.A DL:3.1 Mbps UL:1.8 Mbps
Display LED indication
Interface USB interface(USB 2.0)
OS WinXP/2000/Vista/ Win7/Win8 MAC10.6/10.7/10.8
Micro-SD Support
Feature Support data, voice, SMS
SMS Printer
GSM SMS Printer MP-12P Application about SMS Printer: As a fast growing industry, buy via internet today is attracting more clients because of its many advantages such as convenience and time saving etc. as computer and mobile communication industry become more perfect technically and their application more popular. For example, if we deploy GSM wireless terminals with a builtin thermal printer in takeaway shops and restaurants located in lanes and streets, customers can send food order information with computer or mobile, these information will be easily and quickly delivered to restaurants through computer networks and GSM wireless networks. Restaurants print out order contents, make and deliver food to customers in time as required. This not only brings much convenience for customers, but also makes a new sales channel for restaurants without increase of cost. Except food ordering, this internet buy can also be extended to other applications such as flower ordering and groceries ordering, bank services etc. We call this device SMS PRINTER.
GSM/GPRS SMS Printer MP-10 Key functions 1)Can print orders from web or client(Client sends SMS to printer). 2) Transmit orders by GPRS or SMS mode. 3) Supply power mode: power adapter or battery. When the power is off, the user can print orders by battery supplying. 4) Print orders automatically. 5) When the new order coming, alarm music will sound. 7) SMS Printer can send confirmed message to server (web) 8) Standalone device, no need to connect to PC 9) Menu operation interface, easy operation
GSM + VOiP Gateway
30 channels GSM+VoIP Gateway DMT-V VoIP GSM Channel Bank DMT-V
16/24/30 ports VoIP GSM Gateway (support SIP and H.323)
Build in 1U IPC
Provide CDR Monitor
Has LCR
1 sims/4 sims/32 sims per GSM Channel
SMS sending and receiving
Support Remote Monitor traffic via VNC
GSM Frequency: Quad Band:900/1800/1900/850MHZ
DMT-V GSM VOIP Channel Bank 30 channels: 24 channels: 16 channles:
8 Channels GSM VoIP Gateway MVG-08
is a multi-functional product used to effectively implement the smooth transition between PLMN (GSM/CDMA) and VoIP network.
The GSM/CDMA VoIP gateway is designed for comfort, ease-of-use to satisfied necessary of customers. It is not only inherits tradition of quality voice
communication over IP network but reduce the human resource of VoIP network deployment. It ¡s a cost-effective gateway for call termination (VoIP to
GSM/CDMA) and origination (GSM/CDMA to VoIP). It is fully compatible with leading Softswitch and SIP server.
4 / 8 GSM channels LINUX platform Power Over Ethernet (PoE) GSM: Quad-band 850/900/1800/1900MHz IMEI and PIN modified SMS sending and receiving PSTN and VoIP hotline USSD, open API for SMS
Up to 8 concurrent calls Flexible dial plan, digit map Mobile Characteristics Network Features SMS/SMSC Static IP/DHCP Polarity reversal DNS CLIR Qos PIN/IMEI modify Soft Switch config by IP/URL USSD, BCCH VLAN Carrier select VPN SIM/UIM card Locked ARP System Maintain & Upgrade NAT trasversal Web/telnet configuration Silence Suppression Config Backup/restore One stage dialing and Secondary dial-up Firmware upgrading by TFTP Redirect IP User-defined IVR Anonymous Call User and password management Answer delay Syslog, CDR, SNTP Digit Map Ping and tracert test