tel105 series - a messe supplyamessesupply.com/_pdf/toto_tel105_lavatory_faucet.pdftoto model #_____...
TRANSCRIPT
TEL105 SeriesStandard EcoPower® Faucet
FEATURES
• Self-generating hydropowered EcoPower system• No minimum daily usage requirement• Micro-sensor positioned underneath the spout
head for accurate hand detection ensuring smoothand consistent water distribution
• Vandal resistant aerator housing• Durable chrome plated spout body• Single-hole mount• Kit includes spout body, controller box , and
mounting hardware - less supply lines• Equipped with 0.5gpm flow control
MODELS
COLORS/FINISHES
• #CP Polished Chrome• #BN Brushed Nickel• #PN Polished Nickel
TEL105-D10E• TELS105 (Standard Spout)• TELC105-D10E (Controller: 0.09gpc,
10 sec on-demand)
TEL105-D10EM• TEL105-D10E (Standard Spout Kit)• TLM10 (Mixing Valve)
TEL105-D10ET• TEL105-D10E (Standard Spout Kit)• TLT10 (Thermostatic Mixing Valve)
TEL105-C20E• TELS105 (Standard Spout)• TELC105-C20E (Controller: 0.19gpc,
20 sec continuous)
TEL105-C20EM• TEL105-C20E (Standard Spout Kit)• TLM10 (Mixing Valve)
TEL105-C20ET• TEL105-C20E (Standard Spout Kit)• TLT10 (Thermostatic Mixing Valve)
PRODUCT SPECIFICATION
TOTO Model #______________ The faucet shall have hydropowered self-generating, EcoPower System. The faucet shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). The faucet shall have self-adjusting sensor.
CODES/STANDARDS
• Operates below federally mandated consumptionlimit of 0.25gpc
• Complies to California Green Building Code,CALGreen of 0.20 gpc
• Meets or exceeds ASME A112.18.1M/CSA B125.1,and NSF372-2011
• Certifications: IAPMO(cUPC), State ofMassachusetts, and others
• California Green Code and City of Los AngelesWater Efficiency Ordinance
• ADA compliant• Complies with federal and state statutes as
low-lead (contains a weighted average of 0.25%lead or less)
* For codes and standards of mixing valves TLM10 and TLT10,please refer to corresponding product spec sheet
LOW-LEAD
OPTIONAL ACCESSORIES
• THP3158#CP - 4" Cover Plate• 71244T8CC - 8" Cover Plate
Standard EcoPower® Faucet
#SS-01078, v.03Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
These dimensions and specifications are subject to change without notice
TEL105 Series
NOTE
Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.
Water SavingOn-Demand [10 sec.] faucet (0.09gpc)Federal Standard (0.25gpc) – 64% lessCAL Green (0.20gpc) – 55% less
Continuous [20 sec.] faucet (0.19gpc)Federal Standard (0.25gpc) – 24% lessCAL Green (0.20gpc) – 5% less
3-15/16” (100mm)
(50mm)
2-15
/16”
(7
4mm
)
4-1/
2”(1
14m
m)
2” (5
0mm
)M
ax d
eck
thic
knes
s
Faucet hole Ø1-3/8” (Ø35mm)
5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-15/16” (100mm)
(50mm)
2-15
/16”
(7
4mm
)
4-1
/2”
(114
mm
)2”
(50m
m)
Max
dec
k th
ickn
ess
Faucet hole Ø1-3/8” (Ø35mm)
5-5/
8”(1
42m
m)
G1/2 1-11/16” (42mm)
1-3/
4”(4
4mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-3
/16”
(82m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck t
hic
kn
ess
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”
(23mm)
3-15/16”
(100mm)
(50mm)
2-1
5/1
6”
(74
mm
)
4
-1/2
”
(114
mm
)
2”
(50
mm
)
Max d
eck t
hic
kn
ess
Faucet hole Ø1-3/8” (Ø35mm)
5-5
/8”(
142m
m)
G1/2 1-11/16” (42mm)
1-3
/4”
(44
mm
)7”
(178
mm
)
4-5/8”(117mm) 3-5/16”(83mm)
3-5/8”(94mm)
3-3
/16
”(8
2m
m)
G1/
2
G1/2
G1/
2
Φ1-5/8”(Φ42mm)
G1/2 compatibel with ½ NPSM
3-5/16”(84mm)
3/8 COMPRESSION
2-1
/2”
(63
mm
)
1-7/1
6”
(36
mm
)
2-13/16” (71mm)7/8”
(23mm)
Standard Controller
Hot/Cold Mixing Tee (TLM10)
Available Mixing Valves
*Gallons per cycle (gpc) is the amount of water per usage cycle .** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed).*** Continuous means that water is dispersed for a continuous 20 second cycle.
SPECIFICATIONS
EcoPower
5-1/8" - 7-7/8" (130 - 200mm)
Sensor is self-adjusting
Min (Dynamic/Flowing) Pressure: 15psi (100kPa)Max (Static) Pressure: 80 psi (551kPa)
G1/2 (1/2 NPSM compatible)
32-110°F(0-42°C)
32-104°F(0-40°C)
Max. 90% RH
0.09 gpc* - max 10 second On-Demand**
(0.09 gpc = 0.5 gpm x 10/60 sec)
Equipped with 0.5 gpm flow control
0.19 gpc* - 20 second Continuous***
(0.19 gpc = 0.5 gpm x 20/60 sec)
Equipped with 0.5 gpm flow control
Three years
Power Supply
Sensor DetectionRange
Water Supply Pressure
Water Supply
Inlet TemperatureRange
Ambient Temperature
Humidity
Flow Rate
Warranty
Thermostatic Mixing Valve (TLT10)
Product Number
TEL10* Series
TEL105-D10E#$$ - TELS105#$$ (Standard Spout) - TELC105-D10E (Controller)TEL105-C20E#$$ - TELS105#$$ (Standard Spout) - TELC105-C20E (Controller)TEL101-D10E#$$ - TELS101#$$ (Spout) - TELC101-D10E (Controller)
Sensor Faucet, Standard SpoutEcoPower® Self-Generating System
Parts Manual PD-00888, v.03
3
4
5
2
6
7
8
1 THP3155 Sensor2 TH559EDV568 Nozzle for TELS105 TH559EDV567 Nozzle for TELS1013 THP3157 Gasket4 THP3152 Hose5 THP3153 Clip (1 pc)6 TH559EDV402R Spout Mounting Kit7 TH559EDV403R Spout Nut8 THP3154 Nozzle Removal Key
C1 TH559EDV562 Generator for TELC105-D10E, TELC105-C20E TH559EDV462 Generator for TELC101-D10E
C2 THP3132 O-ring (1 pc)C3 THP3107 Spacer, between Gene and SolenoidC4 THP3106 C-Clip, between Gene and SolenoidC5 THP3108 Solenoid Valve UnitC6 THP4115 O-ring (1 pc)C7 THP3112 Mount BracketC8 THP3111 StrainerC9 THP3102 Adaptor, Supply in
C10 THP3101 Large Nut for MountC11 THP3113 CaseC12 THP3053 Backup Battery (Lithium) (1 pc)C13 THP3096 Controller for TELC105-D10E, TELC101-D10EC13 THP3114 Controller for TELC105-C20EC14 THP3105 Cover, ControllerC15 THP3098 CoverC16 THP3099 Screw for CoverC17 THP3109 Quick FastenerC18 THP4485 Screw (1 pc)
Item Part Description Item Part Description
C1
C2
C8
C7
C6
C5
C4
C3
C9
C10
C12
C13
C14
C15
C16
C17
C18
C11
T3
T4
1
T1 T2
T1 TLT10 Thermostatic ValveT2 TLM10 Hot/Cold Mixing TeeT3 THP3158#CP Cover Plate – 4”T4 71244T8CC Cover Plate – 8”
$61.20
42.21$
86.6$
64.003$
$6.68
08.91$
$21.14
80.05$
00.44$
00.85$
ecirP