technology unit introduction to onstruction technology · health and safety in the construction...
TRANSCRIPT
Tasks to Complete
Organize
Introductory
documents in your
binder.
Complete Unit
Calendar
Student Skills Survey
Shop Layout
Assignment
Safety Guidelines
Scavenger Hunt
Unit Completion:
Safety Guidelines
Quiz (>60% Pass)
E1. identify and follow health and safety regulations, standards, and procedures related to the construc-
tion industry;
E1.1 identify laws, regulations, standards, regulatory agencies, and advocacy bodies related to
health and safety in the construction industry (e.g. Workplace Safety and Insurance Board *WSIB+,
Ministry of Labour, Construction Safety Association of Ontario);
E1.2 identify hazards related to materials, processes, and equipment used in construction (e.g.,
flammable solvents, toxic chemicals, sharp blades, moving parts in machinery), as well as re-
sources and methods for reducing these hazards (e.g., Workplace Hazardous Materials Infor-
mation System *WHMIS+, safe handling and operating practices, personal protective equipment);
E1.3 demonstrate an understanding of and adhere to safety practices and procedures for facilities,
processes, materials, tools, and equipment used in construction (e.g., use of tool and equipment
guards);
Construction
Technology
Unit 1- Introduction to
Construction Technology
Grade 10 Unit 1 of 18
Expectation - By the end of this unit you will be able to...
Unit Length: 5 periods
Number of Tasks 6
Lectures: 2 - 60 minute
Topics include:
Course Introduction
Evaluations Breakdown
Classroom Expectations
Safety Contract
Safety Guidelines
Shop Tour
Machine Identification Hi I am Spike.
Let's get started!
Start
Date
Completion
Date
Required
Resources
Introductory
Sheets
Unit Calendar
Student Skills
Survey
Shop Layout
Assignment
Safety Guidelines
Scavenger Hunt
1. This course design is based on current research from self-directed learning models which will...
"Wean students off the intensive reliance on the teacher and guide them toward becoming active learners with a vested interest in their own educational success."
John Abbot quoted in “Closing the Gaps for Students with Special Education Needs in Ontario: Research Trends and Capacity Building”:
(http://www.edu.gov.on.ca/eng/research/speced_gap_paper.pdf)
2. There are 18 units with each having an average of 4 tasks. In order to earn your credit
you must complete all 18 units.
3. Time has been built into the units to allow for assemblies, snow days, Literacy test,
EQAO math test, and other school events.
4. Each unit has lecture time and a combination of worksheets, practical projects, reflection
sheet and tests.
5. You must receive a minimum of 60% to move to the
next unit.
6. When you see Spike say "You Nailed It!" then you have
completed a task. It is a good idea to go to your instruc-
tor and show your work after each task. You can also
work through the entire unit on your own with the help
of a Resource Manual.
7. The Resource Manual and Worksheets are located at the front of the classroom.
8. The Completion Date Calendar and Student Unit Progress is posted on the Bulletin
Board. This will help you organize each period in the class for success.
Example of Organizing Your Unit Completion Dates
Construction Technology
Wood is Good!
Month 1 - September
M T W T F
1
2
3
4
Month 2 - October
M T W T F
5
6
7
8
Month 3 - November
M T W T F
9
10
11
12
Month 5 - January
M T W T F
16
17
18
Month 4 - December
M T W T F
13
14
15
1 Unit Start Dates: numbered
Unit Completion Dates: check mark
No School: shaded
Important Note: time has been built into all the
units to allow for assemblies, snow days, Literacy
test, EQAO math test, and other school events.
Exams
Constructio
n Tech
nolo
gy
Introduction
Unit 1- Introduction to Construction Technology Balabuck©
Construction Technology - Course Information
This course will explore a wide variety of activities that encompass this industry.
Topics may focus on:
Residential/Industrial Construction
Materials, Processes, Labour and Tools
Woodworking / Cabinet Making
Electrical Systems and Building Standards
Technical Drawing
Environmental Practices, Careers and Health and Safety
Course Requirements
To prevent accidents, all safety policies reviewed by the course teacher will be enforced and must be
strictly followed by the students. Every student must wear CSA approved safety glasses, as required in
technological classes.
Attendance
Every student must attend class regularly and arrive on time, ready to start work. This will prepare you
for the world of work. This is a performance based course and you need to be in class for the teacher to
evaluate your progress. If you are not here or tardy , then this will affect your grades.
Come to class and be on time.
Credit Conditions
A minimum grade = 50%
A minimum 110 to 120 hours of instruction (class time) or 90 days
All 18 Units must be complete to earn the credit
Notebooks
Notebook = Textbook in this course
Required - 3 ring binder, loose-leaf paper, dividers
Organization
Sequential by daily work - units, notes, handouts, assignments, projects
Use a new page for each lesson
Constructio
n Tech
nolo
gy
Unit Breakdown - Grade 10
Unit 1- Introduction to Construction Technology Balabuck©
There are 18 units with each having an average of 4 tasks. In order to earn your credit you must
complete all 18 units.
Time has been built into the units to allow for assemblies, snow days, Literacy test, EQAO math test,
and other school events.
Each unit has lecture time and a combination of worksheets, practical projects, reflection sheet and
tests.
You must receive a minimum of 60% to move to the next unit.
Units
Unit 1- Introduction to Construction Technology
Unit 2 - Design and Technical Drawings 1
Unit 3 - Machine Specific Safety Theory (not qualifications)
Unit 4 - Design and Technical Drawing 2
Unit 5 - Measuring and Hand Tools
Unit 6 - Project 1 - Push Stick
Unit 7 - Project 2 - Mirror Shelf (1 of 3)
Unit 8 - Project 2 - Mirror Shelf (2 of 3) & Environmental Impact
Unit 9 - Project 2 - Mirror Shelf (3 of 3)
Unit 10 - Woodworking - Estimation & Procedures
Unit 11 - Design, Layout and Planning Skills
Unit 12 - Project 3 - Major Project
Unit 13 - Project 3 - Major Project
Unit 14 - Building Construction - Structural System
Unit 15 - Project 3 - Major Project
Unit 16 - Project 3 - Major Project
Unit 17 - Project 3 - Major Project and Careers
Unit 18 - Culminating Tasks
Constructio
n Tech
nolo
gy
Evaluation
Unit 1- Introduction to Construction Technology Balabuck©
The final grade for this course will be determined as follows:
70% of the grade will be based on evaluations conducted throughout the course. That is, based on
work completed in Terms I and II and will reflect the student’s most consistent level of achievement
throughout the course.
30% of the grade will be based on a final evaluation, consisting of three components: Term II Major
Project, Practical Exam and Written Exam. This is to better reflect the hands-on nature of learning
that takes place in the Technological Studies area.
Final Evaluation - 30%
Knowledge & Skills Components Final
1 Application Major Project -Term II (same criteria as Term work) 60
2 Knowledge &
Understanding Written Exam 20
3 Thinking Project Planning Skills and Problem Solving 10
4 Communication Reflection and Course Evaluation 10
Total 100%
Term Work - 70%
Knowledge & Skills* Components Term Work
1 Application
Applying your knowledge and skills (unit tasks) and
understanding in classroom and project work.
Project Application
Skills Acquisition
Project Evaluations (Self, Peer and Teacher)
60
2 Knowledge &
Understanding
Safety Quiz
Unit Tests 20
3 Thinking Design Process, Planning Major Project and Problem Solving 10
4 Communication Technical Drawings and Reflection Sheet 10
Total 100% *Note: For a description of the Categories of Knowledge & Skills see the reverse of this page.
Knowledge and Skills
Knowl e dge /
Unde r st a ndi ng
2 0 %
Appl i c a t i on
6 0 %
Communi c a t i on
10 %
Thi nk i ng
10 %
The MSS Technological Studies Department ensures that the assessment and evaluation techniques
are reliable and direct us to the improvement of student learning. The following strategies are used to ensure
student success (the following are from “GROWING SUCCESS | assessment, evaluation, and reporting in On-
tario schools", 2010):
The Seven Fundamental Principles
To ensure that assessment, evaluation, and reporting are valid and reliable, and that they lead to the im-
provement of learning for all students, teachers use practices and procedures that:
are fair, transparent, and equitable for all students;
support all students, including those with special education needs, those who are learning the language of instruction (English or
French), and those who are First Nation, Métis, or Inuit;
are carefully planned to relate to the curriculum expectations and learning goals and, as much as possible, to the interests, learning
styles and preferences, needs, and experiences of all students;
are communicated clearly to students and parents at the beginning of the school year or course and at other appropriate points
throughout the school year or course;
are ongoing, varied in nature, and administered over a period of time to provide multiple opportunities for students to demonstrate
the full range of their learning;
provide ongoing descriptive feedback that is clear, specific, meaningful, and timely to support improved learning and achievement;
develop students’ self-assessment skills to enable them to assess their own learning, set specific goals, and plan next steps for their
learning.
Categories of Knowledge and Skills (from “The Ontario Curriculum Grades 9 –12: Technological Education", 2009)
The categories, defined by clear criteria, represent four broad areas of knowledge and skills within which the subject
expectations for any given course are organized. The four categories should be considered as interrelated, reflecting
the wholeness and interconnectedness of learning. The categories of knowledge and skills are described as follows:
1. Knowledge and Understanding
Subject-specific content acquired in each course (knowledge),
and the comprehension of its meaning and significance (understanding).
2. Thinking
The use of critical and creative thinking skills and/or processes, as follows:
planning skills (e.g., identifying the problem, selecting strategies and resources, scheduling)
processing skills (e.g., analysing and interpreting information, reasoning, generating and evaluating solutions, forming
conclusions)
critical/creative thinking processes (e.g., problem-solving, design, and decision making processes)
3. Communication
The conveying of meaning through various forms, as follows:
oral (e.g., role play, discussion, presentation)
written (e.g., design briefs, work orders, technical reports)
visual (e.g., technical drawings, flow charts, graphics)
4. Application
The use of knowledge and skills to make connections within and between various contexts.
Midland Secondary School
Technological Studies
Constructio
n Tech
nolo
gy
Classroom Expectations
Unit 1- Introduction to Construction Technology Balabuck©
The class begins at _____ a.m./ p.m. promptly. You are to be seated and have your notebook open.
Choices Consequences
1 Late Athletic - 5 push-ups or 10 sit-ups for every minute late
Academic - Copy from the Student Agenda -
Section #8 Punctuality - Lates
2 Eating or Drinking No food or beverages allowed in class
Exception: Water, Snack Bars or Fruit
3 Disrupting Class - first time Warning
2nd time Removed from classroom and counseling after lesson.
3rd or more times Office referral and Office detention
4 Unsafe practice - first offense Warning and beginning of “3 Step Policy”
2nd offense Office referral and Office detention
3rd offense Removal of Shop privileges
5 Late Assignments No Units will be accepted after the last day of the
semester.
6 Profanity Academic– Write out 5 alternate words and their definition
from the dictionary
Athletic– 15 push-ups or 20 sit-ups
Musical - Sing with actions “I’m A Little Teapot”
7 MP3/Ipod/Other music
devices
Not allowed in the shop area!
No earphones, headphones etc. in your ears in the shop
area!
With permission you may use while completing seat work.
8 Hats (or similar) No hats are to be worn, ever.
Athletic - 5 push ups, 10 sit-ups or
Musical - reciting O’ Canada
SUPPLEMENTAL PROJECT FEE
Dear Parents
We in the Technological Department are looking forward to another great year at Midland Secondary School. Our students experience one of the finest technological studies programs in the entire province. In order to maintain this, we are attempting to arrange partnerships with local business and industry to assist us with the delivery of our programs. From the initial responses it appears that some are willing to donate their time, materials and expertise to help manage our costs.
Many of our technical shops require safety glasses as required daily equipment. Safety glasses are pro-vided for all students and staff and are shared among classes. We have found that some students prefer to purchase a personal set of safety glasses as they can be assured of better fit and condition. We are able to make these available on an optional basis at cost for $5.00 a pair. Upon receipt of cash or cheque (made payable to Midland Secondary School) the student will receive a pair of glasses and a receipt. The glasses will belong to the student and it will be the student’s responsibility to look after them.
From time to time student’s request the opportunity to make a more complex project where more spe-cialized materials are required or wish to take the project home to share their skills with their families or friends. In these cases, students will be asked to pay for the materials as the extra costs cannot be afforded through school budget. All students will get the same opportunities to practice the skills regard-less of whether they choose to purchase materials for “take-home projects”. Please be advised that all requests for such purchase of materials are optional and in no way will impact a student’s participation or his/her mark.
Yours Truly,
Paul Balabuck
Technological Studies Department Chair
MIDLAND SECONDARY SCHOOL 865 Hugel Avenue, Midland, Ontario L4R 1X8 Phone: (705) 526-7817 Fax: (705) 526-1442 email: [email protected]; website: http://mss.scdsb.on.ca
Month 1 - September
M T W T F
7 8 9 10
13 14 15 16 17
20 21 22 23 24
27 28 29 30
Month 2 - October
M T W T F
1
4 5 6 7 8
11 12 13 14 15
18 19 20 21 22
25 26 27 28 29
Month 3 - November
M T W T F
1 2 3 4 5
8 9 10 11 12
15 16 17 18 18
22 23 24 25 26
29 30
Month 5 - January
M T W T F
3 4 5 6 7
10 11 12 13 14
17 18 19 20 21
24 25 26 27 28
31
Month 4 - December
M T W T F
1 2 3
6 7 8 9 10
13 14 15 16 17
20 21 22 23 24
27 28 29 30 31
Exams Holidays
Holidays
P.A. Day
1 Unit Start Dates: numbered
Unit Completion Dates: check mark
No Class: shaded
Important Note: time has been built into all the
units to allow for assemblies, snow days, Literacy
test, EQAO math test, and other school events.
Unit Calendar
Please answer the following question to help me determine the knowledge and skills you bring into this
course. Also this survey will help me fine tune the course to your needs. Thank you.
In order to obtain a completion check you must write an answer for each question.
Do not write "I don't know"
Have you taken any Technology courses in at MSS or another school? If so name them (i.e.
Manufacturing, Transportation, Grade 9 Tech, etc...).
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Have you used hand tools or machines before? If so name them (i.e. screw driver, hammer, wrench,
drill, saw, table saw, jointer, etc…).
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Have you made any projects with tools? If so name them (examples: bird house, tool box, model
car, doll house, hung a picture, etc…).
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
What type of project would you like to make in this course?
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
What are you planning to do after you graduate from MSS? Be specific (go straight to work,
university, college, military or apprenticeship).
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Constructio
n Tech
nolo
gy
Name: ____________________________ Student Skills Survey
Unit 1- Introduction to Construction Technology Balabuck©
This exercise will introduce you to the shop/lab area, so you can learn the names of tools, equipment
and where they are located in the room.
Do not turn any of the equipment on while walking around the room and return any doors
or cabinets to their original positions.
Exercise Rough Copy
1. On a piece of blank or lined paper roughly draw the outside and internal walls of the shop/lab area.
2. Show all the doors.
3. Label the rooms.
4. Draw everything using squares or rectangles.
5. Label the cabinets. (i.e. hand tools, storage locker ... etc.)
6. Draw in the location of the workbenches.
7. Using squares or rectangles draw in the machines.
Good Copy
1. Finally, using a pencil and a straight edge, draw the diagram again with the proper labels and submit
to your instructor for evaluation.
2. Remember to write your name and the course name.
Example:
Constructio
n Tech
nolo
gy
Shop Layout Assignment
Unit 1- Introduction to Construction Technology Balabuck©
Name: __________________
Course: _____________ #170 Name: ___________________
Paper
Constructio
n Tech
nolo
gy
Unit 1- Introduction to Construction Technology Balabuck©
Here is a list of labels that you must put on your drawing.
If you do not know what a certain machine is called ask one of your classmates first, then
you can ask your instructor.
When you are finished the good
copy hand in your completed task.
Make sure your instructor checks
off your unit progress.
Congratulations "You Nailed It"!
1. Classroom
2. Sanding Room
3. Finishing Room
4. Project Storage Cabinet
5. Hand Tools Cabinet (2)
6. Work Tables ( 5 + 3)
7. Jointer (2)
8. Table Saw (2)
9. Drill Press
10. Mortiser
11. Lathe (2)
12. Radial Arm Saw
13. Mitre Saw
14. Band Saw (2)
15. Thickness Planer
16. Scroll Saw
17. Flammable Cabinet
18. Wood Storage (Solids)
19. Router Table
MIDLAND SECONDARY SCHOOL 865 Hugel Avenue, Midland, Ontario L4R 1X8
Phone: (705) 526-7817 Fax: (705) 526-1442
email: [email protected]; website: http://mss.scdsb.on.ca
Dear Parent/Guardian: Safety is everyone's responsibly. At M.S.S. we strive to maintain our high standard of excellence in the
Technological Studies Department in both instructional quality and safety. In order to participate in our programs,
the Simcoe County District School Board requires each student to undergo safety training as contained in the
Secondary Technological Education Safety Guidelines.(March 2004 Ed.)
It is important to take note of the following Guideline:
5.3 Guidelines for Students (General):
5.3.1. All students shall sign a Technological Education Student Safety Contract in each instructional
area acknowledging that they have read, been instructed in, understand and agree to abide by
the specific technical safety rules. Failure to comply may result in cancellation of instructional
area privileges
The safety manual is thorough. However, it does not include specific rules and procedures pertaining to individual
labs. There will be additional, specialized instruction for individual equipment in each shop/lab area. Therefore,
attendance is imperative. If a student misses safety instruction in a shop/lab, written assignments will be provided
allowing the student to acquire the missed safety practices. Persistent delinquency may result in removal from the
shop/lab area.
The signatures below permit the student to enter the shop/lab area for further training on the safe operation of the
equipment in each of the instructional areas. It is our wish that everyone has a fun learning experience, with safety
being the top priority.
The persons signed below indicate that they have read and understood the above excerpt from the Secondary
Technological Education Safety Guidelines.
Student Name:(PLEASE PRINT) __________________________ (Read and sign reverse as well)
Student Signature: __________________________ Date: _______________
Parent (Guardian) Signature: __________________________ Date: _______________
Yours Truly,
Mr. P. Balabuck
Technical Studies Department Chair
TECHNOLOGICAL EDUCATION STUDENT SAFETY CONTRACT
THINK SAFETY ….. PLAN SAFELY ….. WORK SAFELY!
In order to work safely in a technological education area it is important that you know and follow the safety rules.
The technological education teacher will provide you with further instruction for specific areas and equipment in a
continuing program of safety education. You may also ask the teacher for assistance at any time. If in doubt, ask
for help before proceeding.
1. Students must never enter the technological education area unless the technological education teacher is pre-
sent.
2. Equipment and/or tools must never be used unless the technological education teacher is in the technological
education area.
3. Before attempting to carry out any work our use any equipment, be certain you have been carefully instructed
in its use, and have been checked out in the proper procedures by your technological education teacher.
4. Wear personal protective equipment as directed by your technological education teacher.
5. Do not wear loose clothing or jewellery, including rings and watches.
6. Hair protection, such as net or hat, must be worn where necessary. Long hair should be neatly tied back.
7. After returning from an absence, students must check with the technological education teacher for possible
missed safety procedures and assignments.
8. Conduct yourself in a safe, sensible, mature manner.
9. Do your part to keep the technological education area NEAT and CLEAN.
10. Report all accidents to the technological education teacher.
11. Know the emergency procedures for your technological education area.
12. Inform the technological education teacher of any unsafe situation or condition in the technological education
area, including damaged or defective tools or machines.
13. Make the technological education teacher aware of any medications you are taking and possible side effects.
14. Ask for assistance from the technological education teacher when you are unsure of the proper procedures or
safety issues.
15. RESPECT the safety, property and personal space of all students.
I have read this Technological Education Student Safety Contract.
I _________________________ understand and will obey these rules.
(student print name)
Failure to comply may result in cancellation of technological educational area privi-
leges.
Student Signature ________________________________ Date ____________
Parent (Guardian) Signature_________________________ Date ____________