technical tool - decoral-system.com€¦ · technical tool s mrk-012-0065 series 11x-xxx-yyyy...
TRANSCRIPT
La
bo
rato
ry T
ests
an
d T
ech
nic
al D
ocu
me
nta
tio
n
TE
CH
NIC
AL
TO
OL
S
MRK-012-0065
SERIES 11X-XXX-YYYY
(DS-0XXXA)
Anti-Graffiti Powder
Information:
1. Product features
2. Technical information
3. Variants and special formulations
4. Possible usage and application
5. Anti-graffiti test
SERIES 11X-XXX-YYYY
Powder with resistance to contamination
1. Product features
The main characteristic of the anti-graffiti powder 11X-XXX-YYYY (previous code: DS-0XXXA) is the high
resistance to contamination: a special formulation makes products coated with this powder impenetrable
to external pollutants, such as dirt and permanent markers/inks. While the cleaning of surfaces painted
with regular powders would leave stains or blotches, surfaces painted with anti-graffiti powder will be
cleaned easily with no traces of pollutants.
These powders are all for sublimation and they are typically smooth and glossy.
2. Technical information
- Technical data
Powder type Polyurethane
Resistence class Class 1
Performance (in surface/mass) 13,1 m2/Kg
Specific weight 1,27 ± 0,03 g/cm3
- Application methods and curing conditions
Powder available for corona charging application.
Curing cycle: 20 minutes at 200°C (metal temperature).
- Mechanical properties and durability
Test Standard Reference Result
Buchholz ISO 2815 ok
Adhesion ISO 2409 No adhesion loss; ok
Salt Spray ISO 9227 corrosion <4 mm; ok
SERIES 11X-XXX-YYYY
Powder with resistance to contamination
3. Variants and special formulations
There are several variants of this series. This powder can be produced: - Clear or colored opaque;
- Super durable, Class 2;
- Low curing;
- Antimicrobial.
4. Possible usage and application The Anti-graffiti series (11X-XXX-YYYY) provides a reliable solution for areas subject to the risk of dirt and
contamination such as urban furniture and public spaces. In addition, this powder coating has great
advantages in office environments where ink stain may soil shelves and objects. Anti-graffiti powders
provide the ability to remove dirt very easily, while maintaining a clean appearance.
SERIES 11X-XXX-YYYY
Powder with resistance to contamination
5. Anti-graffiti test The anti-graffiti properties of this series of powders are tested according to the international standard UNI 11246, which defines the method and the procedures to determine the resistance to contamination. Some of the steps of the procedure:
Soiling
Drying of the staining agents
Cleaning
SERIES 11X-XXX-YYYY
Powder with resistance to contamination
Several staining agents have been tested, removing each one of them with a suitable cleaning product.
Anti-graffiti DS-0810SA (top coat on white base) soiled on the powder-coated surface with the tested staining agents
After removal of the staining agents with different kinds of cleaning products
*mix 70:30 of etasol:methylethylketone
Excellent cleaning
with ethyl alcohol
and with
etasol/MEK*
Excellent
cleaning
with
etasol/MEK
Excellent
cleaning
with
etasol/MEK
Excellent
cleaning
with ethyl
alcohol
area stained with lipstick
area stained with marker
area stained with pentel
area stained with spray for iron surfaces
area stained with acrylic spray
Excellent
cleaning
with
etasol/MEK
LIPSTICK MARKER
permanent ink
SPRAY
acrylic
SPRAY
for ferrous surfaces
N50 PENTEL
permanent ink
SERIES 11X-XXX-YYYY
Powder with resistance to contamination
Effectiveness of cleaning products toward tested staining agents
DS-0810SA (top coat on white base PE411)
CLEANING
PRODUCTS
STAINING AGENTS
LIPSTICK MARKER
permanent black marker
N50 PENTEL permanent
black marker
SPRAY acrylic
SPRAY for ferrous
surfaces
ETH. ALCOHOL V X X V X
ETASOL/MEK V V V X V
White polyesther
CLEANING
PRODUCTS
STAINING AGENTS
LIPSTICK MARKER
permanent black marker
N50 PENTEL permanent
black marker
SPRAY acrylic
SPRAY for ferrous
surfaces
ETH. ALCOHOL X X X X X
ETASOL/MEK X X X X X
SERIES 11X-XXX-YYYY
Powder with resistance to contamination
- Comparison between a standard powder coating and anti-graffiti
Standard polyesther product
Stained with N50 Pentel and cleaned with
etasol/MEK
Anti-graffiti DS-0810SA (top coat on white base PE411)
stained with N50 Pentel and cleaned with etasol/MEK
after 10 cycles of staining/cleaning
E: 0,96; residual gloss: 100%
Marchi di qualità registrati di Decoral System:
DECORAL SYSTEM S.R.L. Viale del Lavoro, 5 - Arcole (VERONA) Italy - Tel. +39 045 7639111 - Fax +39 045 7639100
Email: [email protected] – Sito web: www.decoral-system.com