technical specifications of obstetrics and gynecology ......short cleaning adaptor and...
TRANSCRIPT
Annexure-A
Technical Specifications of Obstetrics and Gynecology Equipments
Contents
Equip sr. no
Equipment name Quantity
1 Colposcope
5
2 Operating Laparoscopy Set
6
3 LCD screen (Monitor) with trolley
10
4 Digital CO2 insufflator
7
5 Laparoscopy trolley and documentation System 7
6 Hysteromat Set
8
7 Vaginal Hysterctomy Set
24
8 Digital High Definition Video Recording System and documentation system
8
9 Three Chip camera head & focusing coupler
6
10 Shadow less mobile side lamp for O.T
28
11 Ultrasound with Doppler and in-built printing and recording system
5
12 Delivery Set 62
13 Obstetric labour table
46
14 Spermfuge Machine
5
15 IVF Instrument 3
16 LLETZ
3
Annexure-A
1. Colposcope
Equipment Name Technical Specifications
Colposcope The video colposcope must have magnification from min.
1x to max. 40x.
Magnification Indicator should be on the video
colposcope
Resolution must be > 825 lines (Std.) > 1,000 lines
(Gamma on)
No of pixel should be 12,00,000
The image sensor must be 1/6 “ microlens color CCD with
high speed Digital Signal Processing
High MCD super bright white shadow less LED light for
true colour reproduction
Colour temperature should be 70000 K, light source life
should be minimum 5000 hrs
Auto focus range should be up to 30-40 cm
Facility for fast focusing zooming, light source, image
freeze using thump on the hand held unit itself
Should be with E-flip & Mirror image function to ensure
extended attention and perfect diagnosis
Acetic test timer and magnification indicator should be
displayed on screen
There must be Electronic Green filter in the hand held unit
without decrease in illumination
Control panel should have feather touch and water proof
buttons. Facility for fast auto/manual focusing. Internal
image freeze function facility. There should be two built
in Video output – BNC & SVHS on the unit. Company
should provide Colposcopy image Management Software
with computer with following facilities. Upgradable
software. Masking facilities. Image capturing while
recording/playing. Final reports with one, two, three &
four images with facility to adjust height & width of
images. Reference: images with finding for comparison.
Facility to save & send the report through e-mail in pdf
format. Facility to get referral linked images. Online
support facility (through internet) for software
Annexure-A
Colposcopy software should run on both window XP &
Vista operating systems
Colposcopy assisted dynamic cases
Facility to take colposcopy images with the colposcopy
report on hard copy Facility to store still images, cine loop
or procedure on CD
Company have to provide trolley for personal computer
Colposcope should be CE, ERTL & ISO certified
Colposcope should be operated through remote control
also
Colposcope should be equipped with Gamma Processor
to enchance vascular structure
Colposcope should have Remote Control facility
2. Operating Laparoscopy Set
Sr. No. Description of Technical Specification
1 Straight Forward Telescope 0° enlarged view, diameter 10 mm, length 31 cm, autoclavable,
fiber optic light transmission incorporated.connection for fiber optic light cable offset by
90°, USFDA / European CE approved.Telescope should have definind length and capability
ofautoclavable for Sterilization QTY-01
2 Forward-Oblique Telescope 30° enlarged view, diameter 5 mm, length 29 cm, autoclavable,
fiber optic light transmission incorporated, connection for fiber optic light cable offset by
90°, USFDA / Eiropean CE approved..Telescope should have definind length and capability
of autoclavable for Sterilization QTY-01
3 Specification rod lens system Scratch resistant Adaptability to high intensity Xenon light
300 watts
4 Trocar -5/6mm diameter; should have multifunctional valve to prevent damage of sharp
instruments and tip lens while passing through the cannula valve. It should have stopcock
for CO2 insufflation. Trocar should have pyramidal tip with pin holes near the tip for safety
outlet of CO2 gas. The working length of the cannula should be 105 mm.USFDA / Eiropean
CE approved. should have multifunctional valve to prevent damage of sharp instruments
and tip lens while passing through the cannula valve. QTY-04
Annexure-A
5 Trocar -10/11 mm diameter; should have multifunctional valve to prevent damage of sharp
instruments and tip lens while passing through the cannula valve. It should have stopcock
for CO2 insufflation. Trocar should have pyramidal tip with pin holes near the tip for
safety outlet of CO2 gas. The working length of the cannula should be 105 mm. USFDA /
Eiropean CE approved.USFDA / Eiropean CE approved. should have multifunctional valve
to prevent damage of sharp instruments and tip lens while passing through the cannula
valve. QTY-03
6
Reducer 11/5 mm-USFDA / Eiropean CE approved. QTY-02
7 Coagulating & Dissectuing Electrode, L- shaped, with connector pin for unipolar
coagulation.USFDA / Eiropean CE approved. QTY-02
8 Three part laparoscopic autoclavable Grasping Forcep with ratchet, Tiger Jaws, 2X4 teeth,
360 degree rotational sheeth, with connector pin for unipolar coagulation, size 5 mm, length
36 cm, long, double action jaws, with ergonomic plastic handle with larger contact area at
the finger ring to avoid pressure sores, can be dismantled with the press of a button, USFDA
/ Eiropean CE approved. QTY-01
9 Three part laparoscopic autoclavable KELLY Dissecting and Grasping Forcep, 360 degree
rotational sheeth, with connector pin for unipolar coagulation, size 5 mm, length 36 cm,
long, double action jaws, with ergonomic plastic handle with larger contact area at the finger
ring to avoid pressure sores, can be dismantled with the press of a button, USFDA /
Eiropean CE approved. QTY-01
10 Three part laparoscopic Bipolar Maryland Dissecting & Grasping Forceps with overload
tissue protection, Wide jaws, with connector pin for bipolar coagulation, 360 degree
rotational sheeth, size 5 mm, length 36 cm, long, single action jaws, ergonomic Plastic
handle with larger contact area, can be dismantled with the press of a button. USFDA /
Eiropean CE approved. QTY-01
11 high frequency cord for bipolar instruments;USFDA / Eiropean CE approved. QTY-02
12 Fiber optic light cable, size 4.8 mm, length 300 cm.USFDA / Eiropean CE approved. QTY-
01
Annexure-A
13
Three Chip Camera System Specifications:Digital Three-Chip Medical-Video-Camera –
color system PAL, with integrated Image Processing Module. Special Features:-• Should
be fully compatible to the color systems PAL & NTSC.All the necceasry setting required to
be done during surgery in the camera should be under sterile area. • Should have the
facility of Digital Image Processing by means of an integrated Image Processing Module.
Multiple settings allow the user to select the preferred level of image enhancement.
-Digital contrast enhancement -Digital anti-moiré/anti-grid filter for use with
fiberscopes.•Should have Parfocal Optical Zoom lens system.• Should have the additional
facility of Electronic 2x zoom, selectable in 4 steps.Integrated Still Image function.• Digital
Video output DV. For direct hook up with Lap top • Should have the Auto Exposure
System for consistent illumination level.• High horizontal image resolution of more than
750 lines, therefore even the finest variations in tissue structures are perceivable on a high-
resolution monitor. • Automatic white balance with memory function for two settings.
• Multilingual menu system.• Character generator • Composite, S-VHS and RGB
compatibility• World power supply • 2 programmable function keys on the camera head for
control of camera functions or video printer/recorder functions & other peripheral units. •
Adaptable to an operating microscope by means of a special quick adapter. • Camera head
fully soakable for disinfection. USFDA / Eiropean CE approved. QTY-01
14 Suction and Irrigation Tube, anti-reflex surface with two-way stopcock, for single hand
control, size 5 mm and 10mm, length 36 cm. USFDA / Eiropean CE approved. QTY-01
EACH
15 Veress Pneumoperitoneum needle with spring loaded blunt inner cannula, LUER-Lock,
autoclavable, diameter 2.1mm , working length 10- 18 cms. USFDA / Eiropean CE
approved.Veress Pneumoperitoneum needle with spring loaded blunt inner cannula, LUER-
Lock, autoclavable, diameter 2.1mm , working length 13 & 15 cms. QTY-01 EACH
16 METZENBAUM Scissors, 360 degree rotational sheeth, with connector pin for unipolar
coagulation, size 5 mm, length 36 cm, long, double action jaws, with ergonomic plastic
handle with larger contact area at the finger ring to avoid pressure sores, can be dismantled
with the press of a button. and Straight Scissor also.USFDA / Eiropean CE approved. QTY-
02 EACH
17 Monopolar high frequency cord-USFDA / Eiropean CE approved.QTY-02
18
PCOD Needle-USFDA / Eiropean CE approved.QTY-02
19 Uterine Manipulator, consisting of: Handle with fixation screw Manipulator Rod 2 Sealing
Cylinder , Silicone Seal, package of 3 (3 sizes) Sheath ,Working Insert, conical, with thread,
medium Working Insert, atraumatic, diameter 7 mm, length 50 mm Working Insert, with
connector for chromopertubation, atraumatic, Ø 4 mm, length 40 mm , Anatomical Blade,
short Cleaning Adaptor and Colptomizer.USFDA / Eiropean CE approved.QTY-01
20 Macro needle holder with tungsten carbide insert, dismantling into three parts namely, outer
tube, handle and inserts, ergonomic pistol handle, with disengageable ratchet, jaw curved to
left and Stright, size: 5mm, length : 33cm for use with suture material size: 0/0 to
7/0.USFDA / Eiropean CE approved.QTY-01 EACH
21 Post closure USFDA / European CE approved.QTY-01
Annexure-A
22 Knot Pusher USFDA / European CE approved. QTY-01
23 BABCOCK Grasping Forceps, rotating, with connector pin for unipolar coagulation, size 10
mm, length 36 cm, double action jaws. USFDA / Eiropean CE approved. QTY-01
24 Xenon light source of 300 Watts : Lamp type:- Xenon 300 Watt • Should be able to
produce color temperature of 6000 K, • Light Outlets – 1, • Should have continuous manual
adjustement of light output or automatically by camera head. • Should be supplied with one
Light cable Diameter 4.8mm, Length 300cm. Should be offered with one spare xenon lamp
300 watts. USFDA / Eiropean CE approved.QTY-01 .
25 CO2 Electronic Insufflator: Electronic CO2 insufflators Should have an adjustable flow
rate Gas flow/min 0-20 ltrs, Pressure (mmHg) 0-30 (mmHg), Intra-abdominal pressure
guage 0-50 (mmHg), Power supply 100-240 VAC (50/60 Hz), Dimension 305 x 164 x 233
mm (w x h x d), Weight 6 kg, Certified to IEC 601 – 1, CE label according to MDD. -High
degree of patient safety. -Clear, adjacent display for set value and actual value allow easy
monitoring of insufflations process, - Touch keys for precise pre-selection of set values. -•
Can be control with camera head, it makes operating for the surgeon a highly ergonomic and
pleasant working experience.Should have High Pressure Hose, American connection / pin-
Index connection (CO2), length 102cm.Safety – constant monitoring of Intra-abdominal
pressure; any overpressure is reduced immediately. USFDA / Eiropean CE approved. QTY-
01 .
26 MEDICAL GRADE 19 Inch Table Mounted LCD VIDEO MONITOR, Special features
: Multi-norm monitor for PAL & NTSC with automatic Switchover. Liquid Crystal
Display.Composite, S-Video, RGB,SDI/HD-SDI,DVI-D,VGA, compatible. Compact &
Light weight design.Drip Water protected, dustproof housing.On-Screen menu for Monitor
setting (in multiple language possibility).Brightness 450 cd/m2.Max Viewing Angle 178
degree Vertical.Pixel Distance: 0.294mm.Contrast: 600: 1.Input Signal Level: 0,7 Vp –
P.Rated Power: 40 Watt.Operating conditions: 0 – 38 degree Centigrade.Storage: At 20 – 60
degree Centigrade.Relative Humidity: 5 – 90% non-condensing.Dimensions: W x H x D:
465 x 400 x 98.Power Supply: 100 – 240 VAC, 50/60 Hz.Certification: EN 60601,
protection class IPX1.Compatible with 4:3,5:4,16:9 and 16:10 signal format display Picture
in picture Certified to EN60601-1,UL60601-1,MDD93/42/EECProtection class IPX1.
USFDA / Eiropean CE approved. QTY-01 .
27 Equipment Cart:- Equipment Cart wide, high , rides on 4 antistatic dual wheels equipped
with locking brakes, mains switch on cover, central beams with integrated electrical sub
distributors with 12 sockets, grounding plugs, Dimensions in mm (w x h x d):Equipment
cart: 830 x 1474 x 730,Shelf: 630 x 25 x 510 Caster diameter: 150mm ,consisting of:- Beam
Package, equipment cart high 3 X Shelf, wide , Drawer Unit with Lock, wide, - 2X
Equipment Rail , long, - Camera holder. Monitor Holder, Monitor Holder , height adjustable
, swiveling and tilting , swivel range approx. 360 degrees.Load capacity max 18 kg, with
monitor fixation VESA 75/100.USFDA / Eiropean CE approved. QTY-01
Annexure-A
3. LCD screen (Monitor) with trolley
Equipment Name Technical Specification
LCD screen (Monitor)with trolley
MEDICAL GRADE 19 Inch Table Mounted LCD VIDEO MONITOR, Special features : Multi-norm monitor for PAL & NTSC with automatic Switchover. Liquid Crystal Display.Composite, S-Video, RGB,SDI/HD-SDI,DVI-D,VGA, compatible. Compact & Light weight design.Drip Water protected, dustproof housing.On-Screen menu for Monitor setting (in multiple language possibility).Brightness 450 cd/m2.Max Viewing Angle 178 degree Vertical.Pixel Distance: 0.294mm.Contrast: 600: 1.Input Signal Level: 0,7 Vp – P.Rated Power: 40 Watt.Operating conditions: 0 – 38 degree Centigrade.Storage: At 20 – 60 degree Centigrade.Relative Humidity: 5 – 90% non-condensing.Dimensions: W x H x D: 465 x 400 x 98.Power Supply: 100 – 240 VAC, 50/60 Hz.Certification: EN 60601, protection class IPX1.Compatible with 4:3,5:4,16:9 and 16:10 signal format display Picture in picture Certified to EN60601-1,UL60601-1,MDD93/42/EECProtection class IPX1. USFDA / Eiropean CE approved. QTY-01
4. Digital CO2 insufflator
Equipment Name Technical Specification
Digital CO2 insufflator CO2 Electronic Insufflator: Electronic CO2 insufflators
Should have an adjustable flow rate Gas flow/min 0-20
ltrs, Pressure (mmHg) 0-30 (mmHg), Intra-abdominal
pressure guage 0-50 (mmHg), Power supply 100-240
VAC (50/60 Hz), Dimension 305 x 164 x 233 mm (w x h
x d), Weight 6 kg,
Certified to IEC 601 – 1, CE label according to MDD. -
High degree of patient safety. -Clear, adjacent display for
set value and actual value allow easy monitoring of
insufflations process, - Touch keys for precise pre-
selection of set values. -
• Can be control with camera head, it makes operating for
the surgeon a highly ergonomic and pleasant working
experience.Should have High Pressure Hose, American
connection / pin-Index connection (CO2), length
102cm.Safety – constant monitoring of Intra-abdominal
pressure; any overpressure is reduced immediately.
USFDA / European CE approved. QTY-01
Annexure-A
5. Laparoscopy trolley and documentation System
Equipment Name Technical Specification
Laparoscopy trolley and documentation System
Equipment Cart, wide, high , rides on 4 antistatic dual wheels equipped with locking brakes, mains switch on cover, central beams with integrated electrical sub distributors with 12 sockets, grounding plugs, Dimensions in mm (w x h x d):Equipment cart: 830 x 1474 x 730,Shelf: 630 x 25 x 510 Caster diameter: 150mm ,consisting of:- Beam Package, equipment cart high 3 X Shelf, wide , Drawer Unit with Lock, wide, - 2X Equipment Rail , long, - Camera holder. Monitor Holder, Monitor Holder , height adjustable , swiveling and tilting , swivel range approx. 360 degrees.Load capacity max 18 kg, with monitor fixation VESA 75/100. USFDA / European CE approved.
6. Hysteromat Set
Equipment Name
Technical Specification
Hysteromat Set
Forward-Oblique Telescope 30°, enlarged view, diameter 2.9-3.0 mm, length
30 cm, autoclavable, fiber optic light transmission incorporated.QTY-01,
Hysteroscope sheath for diagonostic continuous irrigation size 4.5-4.6mm outer
sheath and 3.8-3.9mm inner sheath for use with 2.9-3.0mm hysteroscope
telescope.QTY-01 Hysteroscope sheath for Operative continuous irrigation
size 5.0-5.1mm outer sheath with operating channel 5Fr, leur lock adaptor and
4.3-4.4mm inner sheath for use with 2.9-3.0mm hysteroscope telescope.
With stopcock & leur lock adaptor and inflow and outflow channel.QTY-01.
Scissors semi rigid, blunt tips, 5 Fr., length 33-36cm, single action jaws-- Qty 02,
Scissors semi rigid, pointed jaws, 5 Fr., length 33-36cm, single action jaws,
semi-rigid ---Qty 02. Biopsy- and Grasping Forceps semi rigid, 5 Fr. ,
length 33-36cm, double action jaws---Qty 02, Unipolar Needle Electrode ,
5 Fr., length 34 cm,-Qty 02, Bipolar Dissection Electrode, 5Fr, 36cm,
Bipolar---Qty 02 , High Frequency Cord with 4 mm plug HF-unit, length of
cable should be minimum 300 cm ---Qty 01, Bipolar High Frequency Cord,
should fit in most of the standard electrosurgical unit having banana plug one
side, length should be not less than 250cm.
Annexure-A
BIPOLAR WORKING ELEMENT SET:- BIPOLAR Working Element to be used with
22Fr Resectoscope sheath: Motion by means of a spring. The thumb support is movable.
Return of the loop is controlled by the thumb and in rest position the electrode should rest
inside the operating sheath, to be used with 2.9mm hysteroscopy telescope. Should work
in saline, BIPOLAR Cutting loop 21 Fr should work in saline, Cutting Electrode 21Fr,
bipolar, pointed, should work in saline, Continuous Flow Resectoscope Sheath 22 Fr.,
including connection tubes for in- and outflow, 2 LUER-lock adaptors, 22Fr, oblique beak,
fixed inner tube, with ceramic insulation, for use with working element , Continuous
Flow Resectoscope Sheath 22 Fr., for Bi-Polar, including connection tubes for in- and
outflow, 2 LUER-lock adaptors, 22Fr, oblique beak, rotating inner tube, with ceramic
insulation, for use with working element. should work in saline, Obturator, for use with
the Resectoscope sheath. QTY-01
CONTROLLED IRRIGATION AND SUCTION UNIT: FOR OPERATING
HYSTEROSCOPE AND TCRE PROCEDURE TO MAINTAIN INTRAUTERINE
CAVITY PRESSURE AS DESIRABLE BY SURGEON. PRESSURE OF IRRIGATION
TO BE MAINTAINED BETWEEN:(PRESSURE 0-200mmHg).FLOW TO BE
MAITAINED BETWEEN: (Flow 0-500ml/L.)SUCTION PRESSURE TO BE
MAINTAINED BETWEEN:Suction controlled pressure between 0-(-50kPa)Should have
foot switch for controlling various functions.consisting of: MAIN UNIT WITH DIGITAL
DESPLAY, PUMP HEAD, INDICATOR AND PRESET AND ACTUAL VALUE FOR
PRESSURE, FLOW,SUCTION WITH SENSOR ATTACHMENT FOR REUSABLE
DOME.AUTOMATIC DOME DETECTION FACILITY.Should be supplied along with
following accessories: HYSTEROSCOPE reusable Tubing Set, 2 Nos.Reusable Pressure
dome 2 Nos.Suction bottle 5.0L 2 Nos.Suction bottle cap with stand , Suction tubing set
reusable 2 Nos.,foot switch, 1 Nos,. USFDA / Eiropean CE approved. QTY-01
7. Vaginal Hysterctomy Set
Equipment Name Technical Specification
Vaginal Hyserctomy Set Galicups (M) – 2
Kidney Trays (M+ Big)- 2
Sponge holders- 3
Needle Holder 2 (1 S+1 Big)- 2
6” curved artery forceps 1 set (6 No)-6
6” curved artery forceps 1 set (6 No)-6
6” Allys forceps 1 set (6 No)-6
Babcocks 2 No.s- 2
Kockers (cd) forceps 2 Nos, straight 2-4 long cd artery (6
No)- 6
Long Allys forceps 1 set (6 No)- 6
Annexure-A
Deavers retractor Small – 2
Kellys vaginal retractor -1
Suction Cannula – 1
Myoma Screw-1
Cross action towel clips- 8
Mohnians towel clips – 6
BP handels- 2 (22-1)
Nontoothed dissecting forceps- 2
Ntoothed dissecting forceps- 2
Mayo’s curved scissors- 2
Mayo’s straightscissors- 1
Mosquito curved artery forceps – 6 nos
Mosquito Straight artery forceps – 6 nos
Metal Urethral Catheter- 1
Bladder sound 1
Sim’s Speculum- 1
Miyas Hook
Illuminated Sims Speculum wth fibre optic attachement
wth fiber optic cable
Light Source (Halogen) 250 Watt
8. Digital High Definition Video Recording System and documentation system
Equipments Name
Technical Specification
Digital High Definition Video Recording System and documentation system
Documentation system for digital recording of still images and videos:
Pre-configured complete system for intra-operative recording of still
images and videos and for entering of patient data.Characteristics of the
system::Structured and well-arranged control menus and user
guidance.Optimized for control via the front plate of the system and via a
keyboard.Possibility of control from sterile field via camera head buttons
for recording still images and videos.Recording from clinical video
sources:Still images and videos up to FULL HD resolution Digital inputs:
Annexure-A
DVI and HD-SDI.Analog inputs: Y/C (S-Video), RGB and Composite.
Storage of data on external USB storage medias (external hard disk or
stick), internal hard disk or a network.Quickprint function for fast print of
images.Recorded data can be edited.Possibility of cart installation with a
screen.
Technical data:Input voltage: 100-240 VAC.Input frequency: 50/60 Hz.
Power input: 1.6A (250 VAC).Power output: 25 Watt.Potential
equilization: according to DIN 42801.Potential equilization: according to
DIN 42801.Potential equilization: according to DIN 42801.Hard disk:
320GB.USB connections: USB2.0, High-Speed (1 front connection, 2
connections on the rear).Printer support: Color printer Sony UP-DR80MD
for medical applications.Networking: RJ45 10/100/1000 Ethernet.
External storage: USB-drives (sticks oder hard disks), networks.
Image formats: BMP, JPG, TIFF.Video formats: MPEG-4 (H.264).
Supported resolutions: 1920x1080, 1280x1024, 1280x720, 1024x768,
800x600, 640x480.Video signal inputs: DVI-D, HD-SDI, Y/C (S-Video),
RGB, Composite.Color systems: PAL, NTSC.Resolution images and
videos: up to 1920x1080, aspect ratio 16:9. Dimensions: 305mm x 75,
5mm x 233mm (w x h x d). Weight: 1.8 kg.Type approval: IEC 60601-1-1
, EN60601-1, EN60601-2.Classification: CE, MDD.
Type of protection: IP20. Protection class: 1/B.Medical product: yes.
Consisting of: Control unit. Compact keyboard with touchpad. DVI-D
cable.USB stick.Power cable. USFDA / Eiropean CE approved.QTY-01
Certificates: USFDA/European CE
9. Three Chip camera head & focusing coupler
Equipment Name Technical Specification
Three Chip camera Head & focusing coupler
Three Chip Camera System Specifications:Digital Three-
Chip Medical-Video-Camera – color system PAL, with
integrated Image Processing Module.
Special Features:-• Should be fully compatible to the color
systems PAL & NTSC.All the necceasry setting required
to be done during surgery in the camera should be under
sterile area.
•Should have the facility of Digital Image Processing by
means of an integrated Image Processing Module.
Multiple settings allow the user to select the preferred
level of image enhancement. -Digital contrast
enhancement -Digital anti-moiré/anti-grid filter for use
with fiberscopes.
Annexure-A
•Should have Parfocal Optical Zoom lens system.• Should
have the additional facility of Electronic 2x zoom,
selectable in 4 steps.Integrated Still Image function
.• Digital Video output DV. For direct hook up with Lap
top
• Should have the Auto Exposure System for consistent
illumination level.
• High horizontal image resolution of more than 750 lines,
therefore even the finest variations in tissue structures are
perceivable on a high-resolution monitor.
• Automatic white balance with memory function for two
settings.
• Multilingual menu system.
• Character generator
• Composite, S-VHS and RGB compatibility
• World power supply
• 2 programmable function keys on the camera head for
control of camera functions or video printer/recorder
functions & other peripheral units.
• Adaptable to an operating microscope by means of a
special quick adapter.
• Camera head fully soakable for disinfection. USFDA /
European CE approved.QTY-01
10. Shadow less mobile side lamp for O.T
Equipment Name Technical Specification
Shadow less mobile side lamp for OT Mobile LED OT light completely spring balance with
40,000 HRS. lamp life. Inbuilt Power supply with battery
backup for emergency use. It should provide cool white
light. Light intensity should be 80,000 Lux.
Product should be European CE/ US FDA approved.
11. Ultrasound with Doppler and in-built printing and recording system
Equipment Name Technical Specification
Ultrasound with Doppler and in-built printing and recording system
Capable of processing and displaying 3D rendering of 2D
images
Annexure-A
Broadband multifrequency Tranducers-convex
(abdominal) and TVS
Include a full complement of measurement and
calculation package
Digital Ultrasonic System
T issue Harmonic Imaging
Software package along with format for Ob & Gy
Real time dynamic ROF, RDA, DFP, DRA.
*permanent inbuilt + USB images storage
>256 frame line loop.S
Ergonomic keyboard
-back lit keyboard + direct printing, 6 STC slides for easy
adjustment
-multifunction knob + toggle for quick adjustment
Scanning method – Electronic convex / Linear /
Microconvex
Display modes – B, B/B,UB, M, B/M
Gray scale
Probe frequency 2.5 MHz – 9.0 MHz
Monitor - Zoom , Multi step
Image processing & reversing
Power supply Ac 230v + 10%, 50 Hz
Standard - main unit + convex printer + 2 probe connector
+ USB ports + VGA Port (extra transvaginal probe) +
inkjet printer
Trolley, Biopsy kit
Multidisciplinary ultrasound color Doppler with pulse
wave -spare part with ultra sound modem
-Beam former board
-Transmitter board
-Receiver board
-Digital scan converter board
-Power supply unit
-Pobes X 2
Certificates: USFDA/European CE Approved
Annexure-A
12. Delivery Set
Equipment Name Technical Specifications
Delivery set Episiotomy Scissor - 1
Long Artery Forceps- 2
Sponge Holding – 2
Tooth Forceps Needle Holder – 1
Small tray for making delivery kits(SS)
Certificate : USFDA/European CE approved
13. Obstetric labour table
Equipment Name Technical Specifications
Obstetric Labour table Overall approx extended size 1880 mm length*9000 mm
width*800mm height
Three section-top backrest adjustable on rachet
-middle section with’ U’ cut
-Leg end section can slide completely
under main frame
Gas sparing assisted trendelenberg position
SS head side railing,SS handgrips ,rubber padded SS
lithotomy rods and SS bowl
Certification : USFDA/European
14. Spermfuge Machine
Equipment Name Technical Specifications
Spermfuge Machine The ultrasonic dissector should have following features
Shears must be capable of dissecting, cutting and
coagulating vessels upto 7 mm.
Cutting & coagulating with ultrasonic energy
Transducer for Lap and open surgery
Tissue gasping with using Parallel Jaw closure
Should be compatible with 5mm instruments
The system should have stand by mode
Annexure-A
Power should be adjustable from 1-5
The ultrasonic dissector should have following instrument
to handle following open and laparoscopic surgery
instruments such as :
Shears of 5mm thickness and shaft length 180 mm- 390
mm
Shears of 5mm thickness and shaft length 320mm-
380mm
Shears of 5mm thickness and shaft length 90mm-170mm
Ball probe
Hook probe of 5 mm thickness and shaft length 300mm -
350mm
Cable for ultrasonic transducer -1no.
ultrasonic transducer -1no.
Foot pedal for ultrasonic generator-1no.
Cerification :USFDA/European CE Apporoved
15. IVF Instrument
Equipment Name Technical Specifications
IVF Instruments 1- Air Jacked CO2 Incubator with IR Sensor Special : Capacity 150 Ltrs Four Inner Glass Doors to saveloss of CO2 gas System to achieve Maximum relative Humidity & Dry Inner Walls Stainless Steel interior Standard Inner 4 Door Fan free Interior – Prevents building up of Germs Perforated shelves for uniform heat distribution Air Jacketed LCD Display Hot Air auto sterilization (180 C) 2. Integrated Laminar flow hood with heated table the integrated Laminar system is Often built in vertical laminar flow cabinet. The utensils are warmed by heating A part of the table by means of special heat Exchanger controlled
Annexure-A
3. Stereo Zoom Microscope Zooming Body With Diopter adjuster, rubber eye shield, reticle lead Diascopic stand C-Ds Diascopic stand S with reflecting lead Power Cord BE 6 V- 20 W halogen lamp with reflector CDs- 33 mm NCB 11 filter 4. Rocket of London Craft Ovum Aspiration pump with Foot operated Switch with Vacuum gauge & regulator Specification Low Pressure: 0-550mm Hg= 0-666 Mbar Volume of overflow vessel: 2Χ100 Connecting for aspiration tubing 2 to 4mm Power Supply : 230 V Power Frequency : 50/60Hz Power Point : 50 VA Nominal Current: 220 mA Power Line isolation : 0.315 5. Indian Pressurizing Module Pressuring Module is used to create the positive inside culture lab Tech specification Pressure: 250 CFM Construction: Liminated board Filtration: 0.3 μ Efficiency : 99.97% Construction : S.S body 6. Digital Cell Transporter with steel body heating Block for heating of test tubes in removable, autoclave anodized aluminum blocks for maintenance of required temp. Digital display & control of temp. with + 0.2C accuracy from ambient to 11 c, 3 anodized blocks of 75Χ 50Χ50 mm to accommodate 12Χ13 ml and 12Χ6 ml tubes . 7. Petri –Plate Prewarmer with Steel Body for preheating of slides, Petri dishes, pipettes etc. of desired temp. Anodized aluminum heating plate (Approx dimension 300 Χ100 Χ40mm) Temp range: from ambient to 1000C with accuracy of + 0.20C 8. Microscope Stage Warmer with Steel Body for maintaining the temp of critical biological specimens at desired level during microscopic observation. An amodized plate of 10 mm thickness with 50 mm central grove with glass & 175 Χ 155 mm dimension which should fit on most miscroscope stages. Temp range ambient to 550C with accuracy of + 02.0C 9. Coda Aero Air purification unit Max Air flow: 530 CFM Effective coverage: up to 350 sq feet Application : more than 200 sq feet
Annexure-A
10. CL2200 Freeze control from CRYOLOGIC PTY LTD. Controlled Rate Preprogrammed Freezer for freezing Sperms, Oocytes, Embros complete with Preprogrammed Controller LN2 bath (Capacity 1.5 L) Carry case Standard Cryochamber to freeze 23 Straws of 0.5 cc & 46 Straws of 0.25 cc Specification Temprature Controller Controlled Temperature range: 200C & 430C Temperature warning ( ED or Sound): 1.50 C deviation Temperature display : Digital. LCD, 0.10C resolution Timing : Digital, Quartz Crysteal Internal Programms: Maximum number of fixed programs: 8 nos Others: continuous LN2 consumption/less than 1 Liter per hour Power consumption/less than 60 Watt Sperm/Embryo freezing
a) TA- 26CRYOCAN, IBP make, 25.7 ltrCapicity with rubber ring & pad b) B) BA- 11 CCRYOCAN, IBP make 10.7 ltr capacity with canisters (For
large capacity) c) BA- 3 11 CCRYOCAN, IBP make 10.7 ltr capacity with canisters (For
Carrying frozen specimen 12. Doctors friendly Software Reprosoft SOFTWARE is designed to cover important areas in a fertility clinic It can be used in a LAN environment with multiple users. Degrees of access to individual user 13. Inverted Research Microsoft: with Hoffman Modulation Contrast Inverted Microsoft basic unit (100-240 V) 12 V- 100W Lamp house- 2 BL with pre-centered 100 W helogen Main Body, Side port Coaxial Coarse/ fine focus W /tension adjustment, Light distribution T-DH 100W Dia illumination Pillar supplied with detachable condenser carrier, diffuser, 45 mm filter slots. LamphouserERmote Cable Helogen Lamp- 12 -100 W LL Power Cord BE 25 Inclination ube D 25 Inclination angle, Turret selector incorporated B/2.5*C/0 HEPA filter Cerification :USFDA/European CE Apporoved
16. LLETZ
Equipment Name Technical Specification
LLETZ Non conductive instruments can be used with any LLETZ/LLEP
Annexure-A
system Highly reliable,autoclavable Built in smoke tubes on all ‘duckbil’ specula. Electrosurgery unit features 5 treatment modes –purecut ,blend,coagulation,fulgrationand bipolar powerful 120 watts purecut and 80watt coagulation modes reduce electrode draw and assure quicker coagulation Square LLETZ electrodes 1cm*0.4cm sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes 0.5*0.5cm , sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes 1*0.5 cm, sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes 1*1 cm, sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes 1.5*0.5 cm, sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes1.5*1 cm, sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes1.5 *1.5cm, sterile,disposable,box of 5;shaft :13cm(5”) Loop LLETZ electrodes2*1cm, sterile,disposable,box of 5;shaft :13cm(5”) Ball LLETZ electrodes,3mm dia, sterile,disposable,box of 5;shaft :13cm(5”) Ball LLETZ electrodes,5mm dia, sterile,disposable,box of 5;shaft :13cm(5”) Cerification :USFDA/European CE Apporoved