Technical SpecificaTionS and opTionS

SB-2500e Material Transfer Vehicle

The SB-2500e Shuttle Buggy® Material Transfer Vehicle from Roadtec is the result of over 20 years of Roadtec experience with transfer technology. The Shuttle Buggy MTV has been able to set the standard for reliability and performance when it comes to eliminating temperature and material segregation in asphalt mix.

All specifications herein subject to change without notice.

engineCAT® 9.3L, 6 Cylinder C9.3, 300 HP / 224 kW @ 1,900 rpm with one year standard warranty.

300 HP / 224 kW @ 1,900 rpm.

elecTrical SySTem

Electric-over-hydraulic solenoids with manual override.

Two 4D batteries. 115 Amp alternator.

24 Volt system with master disconnect switches.

cooling Quiet operation, dual, variable speed fans provide on demand cooling.

conSTrucTion Heavy-duty conveyor flights and chain. Replacable wear plate in all high wear areas. Stability without unnecessary weight.

Truck dump hopper

Front hopper has swivel support casters. Vibrating floor plate. 9’2” / 2.8 m wide truck opening (adjustable width option available). Hydraulic, adjustable push rollers.Hydraulic front hopper baffle adjustable for optimal material flow.

dump hopper TranSverSe auger 29” / 737 mm o.d. cast, segmented auger.

dump hopper unloading conveyor

Drag conveyor with 1,000 TPH / 907 MTPH capacity. Dual roller bushing chain.Heavy-duty flights 5/8” D x 7” W x 56” L / 16mm D x 178mm W x 1,422mm L. Conveyor floors clad with replacable chromium wear plates.

Surge Bin 25 tons / 22.7 metric tons storage capacity.

remixing auger in Surge Bin 29” / 737mm o.d. cast, segmented augers

Surge Bin unloading conveyor

Drag conveyor with 600 TPH / 544 MTPH capacity. Dual roller bushing chain. Flights 5/8” D x 6-1/2” W x 35-1/2” L / 16mm D x 165mm W x 902mm L. Conveyor floors lined with replacable chrome-carbide clad wear plates.

paver loading conveyor

Drag conveyor with 600 TPH / 544 MTPH capacity. Dual roller bushing chain. Flights 1/2” D x 6-1/2” W x 30” L / 13mm D x 165mm W x 762mm L. Conveyor floors lined with replacable chrome-carbide clad wear plates.Insulated conveyor floor.Controls interlock with surge bin unloading conveyor.Conveyor can be positioned up to 50° to either side of center. Conveyor guard rails.

propulSion Hydrostatic (4)-wheel drive. Front-wheel steer.Continuously variable speed control with two speed ranges.

SpeedS Maximum working speed: 3.0 mph / 4.8 kph.Maximum travel speed: 9 mph / 14.5 kph.

TireS (4) 21” / 533mm wide x 25” / 635mm interior diameter high-flotation tires.

Brake SySTem Hydrodynamic, disc caliper (foot pedal), parking.

operaTor conTrolS Two operator stations (left & right side) with deluxe adjustable seats.Operator stations can slide 16” (400mm) out past edge of machine for visibility.Center control console pivots to right or left operator seat as needed.

ground conTrolS (2) front dump hopper control boxes (one on each side).

fume exTracTion SySTem Clearview FXSTM fume extraction system with dual fans draws fumes away from operator area.

acceSS

One-piece hydraulically raisable hood for quick engine access.Hinged access door to oil cooler, radiator and pumps.Hydraulically operated cleanout doors on all conveyors.Remote lubrication points for all conveyors.

Warning SySTem Amber warning beacon.Back-up alarm

fuel Tank 150 gallons / 568 L capacity.

hydraulic fluid Tank 80 gallons / 303 L capacity.

WaShdoWn SySTem 50 ft / 15.25 m retractable hose on hose reel.

operaTor Sun Shade Includes mounting hardware.

Technical SpecificaTionSSB-2500e Material Transfer Vehicle

opTionS

auxiliary poWer

Available generator sets: 4KW 60 Hz 120V Continuous Duty Hydraulic Generator 4KW 50 Hz 240V Continuous Duty Hydraulic Generator6.2KW 60 Hz Continuous Duty Hydraulic Generator

lighTS

Road Light Package:(6) 24 V lightsPremium Light Package:(5) 500 W halogen lights and (5) outlets located at machine corners and at paver loading conveyor.

maSS floW hopper inSerTS Available for use with any size paver.

luBe SySTem Automated lubrication system.

Truck hiTch Replaces push rollers.

environmenTal Tank Spray doWn SySTem 55 gallon / 208 L tank, pump, 50 ft / 15.25 m retractable hose on hose reel.

auTomaTed releaSe agenT Spray doWn SySTem

Control and pump assembly with (16) spray nozzles on each of the (3) conveyors. Timer-controlled system distributes release agent through each of the (3) nozzle sets. Includes (4) hand wands for external use. (2) at front and 2 at rear of machine. Works with most available release agents. Includes filters on the intake end and in each spray nozzle assembly.

lockaBle conTrol Box coverS Available for ground controls and operator controls

camera SySTem (2) color, night-vision-capable cameras. One on front and one on back of machine.Includes color monitor in waterproof case.

WindroW pick-up head Avalaible instead of or in addition to front truck dump hopper.Includes oscillating front conveyor pivot. Hinged, adjustable scraper edge. Spring activated end gates.

STorage On-board, lockble storage compartments.

addiTional Sun Shade Includes mounting hardware.

Shipping WeighT 78,000 lbs / 35,380 kg

fronT STeering axle Load empty: 43,500 lbs / 19,730 kg Load full: 68,500 lbs / 31,070 kg

rear fixed axle Load empty: 34,500 lbs / 15,650 kg Load full: 68,500 lbs / 26,990 kg

ToTal machine WeighT Load empty: 78,000 lbs / 35,380 kg Load full: 125,000 lbs / 56,700 kg

WeighTS (see back cover for dimensions)

SB-2500e Material Transfer Vehicle

machine dimenSionS SB-2500e

All specifications are subject to change without notice.© Roadtec 2012 Adams

9’9-

3/4”

/ 29

92m

m

11’3

-1/2

” / 3

441m

m

14’4

” / 4

369m

m

34’1

1-1/

4” /

1064

7mm

shi

ppin

g le

ngth

with

pav

er lo

adin

g co

nvey

or r

emov

ed, f

ront

dum

p ho

pper

up.

54’1

0-3/

4” /

1652

7mm

56’1

0” /

1732

5mm

1’10

” / 5

57m

m

7’9-

3/4”

/ 23

79m

m12’ /

366

0mm

34’2

” / 1

0415

mm

shi

ppin

g le

ngth

with

pav

er lo

adin

g co

nvey

or r

emov

ed, f

ront

dum

p ho

pper

dow

n.51

’9”

/ 157

72m

m54

’1-1

/4”

/ 164

91m

m55

’1”

/ 167

87m

m

14’1

1-3/

4” /

4568

mm

9’4”

/ 28

45m

m

1’6-

1/2”

/ 46

8mm

2’5-

3/4”

/ 75

5mm

8-1/

2” /

214m

m

3’ /

914m

min

side

7°

26°