technical programme grid (rev 09, 21 sept 2015) case study srinivasan ramabhadran; global practice...

Technical Programme Grid (Rev 09, 21 Sept 2015)

Note: This is a Draft Program and is Subject to Change. Please Check Back Later for the Final Version.

Day 01 Tuesday, November 03, 2015

07.00-11.00 Registration: Pre function area, Hotel Istana

07:30-08:30 Complimentary Breakfast: Pre-function area, Ballroom, Hotel Istana

8:30-08:45 Introduction: Louisa A. Nara - Technical Director, CCPS

8:45-09:00 Welcome : Shakeel Kadri-Executive Director, CCPS (Video recorded message)

09:00-09:15 Address by Chair of the 2nd

CCPS Global Summit on Process Safety-2015 Datuk Ir (Dr) Abdul Rahim Hashim, Vice Chancellor, Universiti Teknologi PETRONAS (UTP)

09:15-09:45 Inauguration by Chief Guest (TBC) YB Dato’ Sri Richard Riot Anak Jaem; Minister of Human Resources, Malaysia

09:45-10:15 Keynote Address by Mr Md Arif Mahmood, EVP & CEO, Downstream Business, PETRONAS(invited) “Leadership Focus in Driving Process Safety Implementation in PETRONAS”

10:15- 10:45 Keynote Address by Anne O’ Neal, Global Manager, Operational Excellence and Health, Environment and Safety

Orinite Chevron - “Process Safety Vision 20/20” 10:45-11:00 Coffee & Networking Break

11:00-12.30 Leaders’ Panel Discussion on Process Safety Moderator: Haris Farooqi, Asia Global Operations Director, Air Products Panel members:

1. Datuk Mohd Anuar Taib, Senior Vice President, Upstream Malaysia, PETRONAS(invited) 2. Anne O’Neal; Global Manager, Operational Excellence and Health, Environment and Safety Orinite Chevron 3. Mr. Waddah Shihab Ghanem Al Hashmi; Executive Director, EHSQ & Corporate Affairs; Emirates National Oil Company

4. Mr. Dinh Van Ngoc, President and CEO; Binh Son Refining and Petrochemical Co. Ltd. 5. TBC

12:30-13:30 Lunch

Committed Culture-Session 01 Vibrant Management Systems-Session 01

13:30-13:35 Session Chair- Cowley Charles; CCPS Staff Consultant

Session Chair- Weber Robert, President and CEO; PSRG

13:35-14:00

Essential Practices for Developing, Strengthening and Implementing Process Safety Culture David A. Moore, President, AcuTech Consulting Inc., USA

PSM Implementation at Binh Son Refining &petrochemical Ltd. - Challenges and Strategies Võ Hoàng Vũ, PSM Group Leader, Technical Department, Binh Son Refining and Petrochemical Ltd., Vietnam

14:00-14:25

Driving Process Safety Culture Rosfinah Ab Kadir, CEO, PETRONAS Chemicals Ethylene Sdn Bhd

Preventing Your Own “Macondo” – How Effectively Are You Managing Safety Critical Elements? Laurentiu Zamfirescu, Senior Inspector Onshore Critical Risk, Government of Western Australia. Department of Mines and Petroleum.

14:25-14:50

Leadership: Inspiring Consistent Process Safety Performance Abang Rahim Drashid; Doug Mowle, JMJ Associates

Integrated Operational Risk Management: Connecting the Impact of Process Safety Management Performance to Daily Operations” Mike Neill; President & CEO, Petrotechnics, USA

14:50-15:00 Q & A Session Q & A Session

15.00-15:30 Coffee & Networking Break

Committed Culture-Session 02 Vibrant Management Systems-Session 02

15:30-15:35 Session Chair - U Anand, Reliance Industries Ltd. Session Chair - Rosfinah Ab Kadir, CEO, PETRONAS Chemicals Ethylene Sdn Bhd

15:35-16:00 Creating and Sustaining Excellent Process Safety Culture and Leadership – Keys to Sustainable Process Safety Performance and Operational Excellence Steve Arendt, Vice President, ABS Group, USA

Making Process Safety Management Systems Vibrant Scott Berger (Vice President) and David Moore (President), AcuTech Consulting Inc., USA

16:00-16:25 Transforming the Safety Culture at Lubref - DuPont Case Study Srinivasan Ramabhadran; Global Practice Leader, Process Safety and Risk Management Consulting; DuPont Company (Singapore) Pte. Ltd.

Reducing Process Risk to Acceptable with a 39 Element Comprehensive Process Safety System Tom Drake, Drake Safety Processes LLC/MESH Systems, USA

16:25-16:50 Building Process Safety Culture in Pharma Industry – Orchid Pharma S. Mani, President & Head- API Process R&D, Corporate SHE and CSR. Orchid Pharmaceuticals, India

Effective Implementation of Bowties, an Organizational Perspective Khairil Osman; Fareed Ebrahim; Johan Kamaruzzaman; Ammeran Mad, Pure Integrity, Malaysia


17:00 Day 1:Session Close

19:00-21:00 Welcoming Reception



Day 02 Wed, November 04, 2015


08:30-09.00 Keynote Speaker: TBC

09:00-09:30 Keynote Speaker: Ir. Mohtar Musri, Director General, Department of Occupational Safety & Health, Malaysia (invited)

09:30-10:30 International Regulators’ Panel Discussion on Process Safety Moderator: Steve Arendt, VP ABS Group, USA ; Support: Louisa Nara, CCPS Proposed Panel members:

1. Hirak Dutta, Executive Director; Oil Industry Safety Directorate, Ministry of Petroleum and Natural Gas, Gov. of India 2. Ir. Mohtar Musri - Director General; Department of Occupational Safety & Health (DOSH) (invited) 3. Mr Muhammad Zamri Jusoh; Vice President, Malaysia Petroleum Management, Upstream Business, PETRONAS (invited) 4. Mr. Laurentiu Zamfirescu; Major Hazard Facilities Regulator of Australia 5. Mdm Jaime Lim; Senior Assistant Director, Major Hazard Installation, OSH Specialist Department, Occupational Safety & Health

Division, Ministry of Manpower, Singapore (Invited)

10:30-11:00 Coffee & Networking Break

Discipline adherence to standards- Session 01 Intentional competency development- Session 01

11:00-11:05 Session Chair- Scott Berger, Vice President (Operations), AcuTech Consulting

Session Chair - Murthy Mahesh, Process Safety Manager, Maersk Oil Kazakhstan GmbH

11:05-11:30 The Application of IEC 61511 for Safety Instrumented Systems, and Its Role in Achieving and Maintaining the Target Risk Ron Bell, Executive Director, Engineering Safety Consultants Ltd, UK

Why Fix Your Eyes on Process Safety Excellence? Lucas Ng HK, Petrochemical Corporation Of Singapore

11:30-11:55 Effective Implementation of PSM to Reduce Risks Srinivasan Ramabhadran; Polshom Chan-urai, DuPont Company (Singapore) Pte. Ltd.

Perspectives on Human Factors in Today's Shifting Operating Environments Palaniappan Chidambaram, Process Safety and Risk Management Consulting, DuPont Company (Singapore) Pte. Ltd.

11:55-12.20 Sustainability Process Safety: Design DATA into Operation and Maintenance in the Processing Industry of Hazardous Chemical Masjuli Masjuli, Balikpapan University, Indonesia

The Need for Process Safety in the Biofuels Industry Louisa A. Nara, CCPS Technical Director, USA


12:30-13:30 Lunch

Discipline adherence to standards- Session 02 Intentional competency development-Session 02

13:30-13:35 Session Chair - Võ Hoàng Vũ, PSM Group Leader, Binh Son Refining and Petrochemical Ltd., Vietnam

Session Chair- V.V.R. Narasimham, Executive Director- HSE, Hindustan Petroleum Corp. Ltd. (HPCL) Refinery, India

13:35-14:00 Towards Bespoke 3D Fire & Gas Mapping: Integration of Risk-Based Approach and CFD Modelling Alexandre Lebas, Head of Computational Fluid Dynamic Department, MES International, UK

A Risk Evaluation Tool and Process Safety Education Programs in Mitsubishi Chemical Group. Masaki Nakagawa, Manager Process Safety, Technology Department, Environment, Safety Quality Department, Mitsubishi Chemical Group, Japan

14:00-14:25 Dynamic Model for a Heat Exchanger Tube Rupture Discharging High-Pressure Natural Gas Vapor into Low-Pressure Liquid-Filled Shell in LNG Processing Industry Ezaideen Ahmad Lokman; Siti Aslina Hussain; Hamdan Mohamed Yusoff; Syafiie Syam ,niversiti Putra Malaysia

Journey Towards PSM Excellence at Reliance Sachin Punekar, Reliance Industries Ltd., India

14:25-14:50 Understanding the Similarities and Difference of OREDA and FMEDA Data Analysis Loren Stewart; Julia V. Bukowski; Desmond Lee, Exida LCC, USA

Intentional Competency Development- Reliance Case Study Vivek Bichave, Vice President, Centre for HSE Excellence; Reliance

Industries Ltd., India


15:00-15:30 Coffee & Networking break / Poster Session

Enhanced Applications and sharing of lessons learned-Session 01

Enhanced Stakeholders knowledge-Session 01

15:30-15:35 Session Chair - Mike Neill, President and CEO, Petrotechnics

Session Chair- Professor Rajagopalan; IIT Gandhinagar

15:35-16:00 Uncertainties in Equipment Reliability Data and Its Impact on Safety Integrity System Calculations – a Case Study of Process Shutdown Valves. Mahesh Murthy-Process Safety Manager, Maersk Oil, Kazakhstan Prakash Kamatharu, Lead Technical Safety Engineer, Aker Engineering Malaysia Sdn Bhd

Establishing & Building a Sustainable Safety Education/Culture at Okayama University. Atsuko Fumoto; Center for Safe and Disaster-Resistant Society, Okayama University, Japan

16:00-16:25 TBC Decision Making Using Human Reliability Analysis. Fabio Oshiro; Principal Safety, Risk, and Reliability Consultant, Monaco Engineering Solutions Ltd, UK

16:25-17:00 Reliability Centered Maintenance to Minimize Integrity Failure. Bhavesh Shukla, Process Safety Manager, The Valspar (Singapore) Corp. Pte Ltd.

Lessons Learned from 40 Years of Accident Investigations. Madhat Abdel-jawad; GexCon, Dubai


17:15-19:00 Poster Evaluation



Day 03 Thursday, November 05, 2015


08:30-09.00 Keynote speaker:- Haris Farooqi, Asia Global Operations Director; Air Products

09:00-09:30 Keynote Speaker:- Datuk Sazali Hamzah, President & CEO of PCG PETRONAS (Invited) “Intentional Process Safety Competency Development at All Level Covering Technical & Behavioral Requirement”

09:30-10:30 Academia panel discussion on Process Safety Moderator: Dr. Bea Ponnudurai – Senior General Manager, PETRONAS Group HSE Proposed Panel members:

1. Prof. Rajgopalan – IIT Gandhinagar, India 2. Datuk Ir (Dr) Abdul Rahim Hashim, Vice Chancellor- Universiti Teknologi PETRONAS 3. Prof. Il Moon – University of Yonsei , S.Korea

4. Louisa Nara, CCPS, USA

10:30-11:00 Coffee & Networking Break / Poster Session

Enhanced Applications and sharing of lessons learned-Session 02

Responsible collaboration-Session 01

11:00-11:05 Session Chair- Ron Bell; Executive Director, Engineering Safety Consultants (ESC) Limited

Session Chair- Dang Ngoc Dinh Diep; Binh Son Refining and Petrochemical Ltd., Vietnam

11:05-11:30 The Implications of Hydrogen Sulphide in the Oil and Gas Industry - Case Studies and Lessons Learned Colin Berry; Giles Davies, Oil Plus Ltd, UK

From High Risk to High Reliability - Through Effective EHS Governance Waddah Shihab Ghanem Al Hashmi Chief EHSQ Compliance Officer, Director - Environment, Health & Safety, Quality Compliance, Emirates

National Oil Company Limited, (ENOC) LLC, UAE

11:30-11:55 Streamlining Instrument Base Layer Control: Key Element for Improving Alarm System Performance Shah Rizal Dahlan, PETRONAS T&E, Malaysia

A Breakthrough Technology to Predict Process Risks for Improved Reliability and Safety: Case Studies from Petronas Abf Operations Aslam Khan B Mohater Khan; Shahrul Anuar B Saat; A Aziz Asri B Sulaiman; Ankur Pariyani, PhD; Deborah Grubbe, PE, Petronas Asean Bintulu Fertilizer, Malaysia

11:55-12.20 Why Safety Barriers Fail: Lessons from Buncefield and Jaipur: A Review of Typical Safety Barriers in Hydrocarbon Storage Tanks and Analysis of Its Failures Using Bayesian Belief Network Unni Krishnan; Fakher Al- Zalzalah; Tejas Doshi, Kuwait Oil Company, Kuwait

30 Years from Bhopal Charles Ian Cowley, CCPS Staff Consultant, UK


12:30-13:30 Lunch

Responsible collaboration-Session 02 Harmonization of standards-Session 01

13:30-13:35 Session Chair- DuPont Company (Singapore) Pte. Ltd. Session Chair- Allen Ormond, ABB Consulting UK

13:35-14:00 Managing Contractors in Process Plant for Process Safety Management Compliance Azmi Mohd Shariff; Noor Diana Abdul Majid; Risza Rusli; UTP

Intentional Competency Development: Harmonizing Standards for Major Hazard Installations Julie Holden; Jacobs, Singapore

14:00-14:25 A Silent Saviour from Process Incident Sarang Mahajan, DuPont Sustainable Solutions; Singapore

Importance of Accurate, Consistent Implementation of Pressure Relief and Disposal System Standards and Guidelines Nancy Faulk; Abdulrehman Aldeeb; Siemens Energy, Inc., USA

14:25-14:50 Human Factors in Barrier Thinking Ron McLeod, Ron McLeod Ltd.UK

Loss of Containment Analysis for Gaseous Oxygen (GOX) Piping Yun-Ho Lee; Air Products, South Korea


15:00-15:30 Coffee & Networking break / Poster Session

Enhanced Stakeholders knowledge-Session 02 Meticulous verification-Session 01

15:30-15:35 Session Chair - Vivek Bichave, Vice President, Centre for

HSE Excellence; Reliance Industries Ltd., India Session Chair- Sulo Belawan, General Manager - PSM, PETRONAS

15:35-16:00 Beyond Process Safety Management: Integrating Culture and Capability into Process Incident Prevention Rob Sheers; DEKRA Insight, South Melbourne, Australia

PSM Auditing & Lessons Learned to Enhance Overall Business Performance Robert Weber (President & CEO); Annie Nguyen (Director); PSRG Singapore

16:00-16:25 Liquefaction Processes and the Challenges with Floating LNG Tom Arne Bakken; James Brown, DNV GL, Malaysia

Demand Warranty For Standalone Equipment Turnaround Maintenance V.V.R. Narasimham, Executive Director- HSE, Hindustan Petroleum

Corp. Ltd. (HPCL) Refinery, India 16:25-16:35 Q & A Session Q & A Session

16:35-17:00 Call for Action - Summary of Leadership Forum on Process Safety Louisa A. Nara, CCPS Technical Director and Executive from Leadership Forum Meeting on Day 1

17:00-17:15 Concluding remark by PETRONAS and CCPS

technical programme grid (rev 09, 21 sept 2015) case study srinivasan ramabhadran; global practice...

Documents