Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.

December 13, 2016

ORDERING INFORMATION

FEATURES AND SPECIFICATIONS

FIXTURE PERFORMANCE POWER FACTOR (PF)

Technical Information Bulletin LED Vapor Tight Luminaire

AMBIENT OPERATING TEMPERATURES

TOTAL HARMONIC DISTORTION (THD)

Date:In hands date of project:Project name/Number:Name of distributor:Client #:Name of end user:

DIMMABLE DAMP WET INDOOR OUTDOOR COMMERCIAL INDUSTRIAL RESIDENTIAL EDUCATIONAL

YEARS

WARRANTY

5IP65IP65

RATING

Order code: 65056Description: LSV/S2/40W/40K/2/DD1/FP/STDUPC: 69549650565Case quantity: 1Luminaire description: LED Vapor Tight Luminaire

Lens type: Frosted PolycarbonateLens benefits: The lens is: UV stabilized, frosted, flexible, light-weight and made of impact

resistant polycarbonate.Applications: Ideal for use in parking garages, dusty wet environments & various industrial,

residential and commercial applications. Indoor or Outdoor applications.Target Mounting Heights: Suitable for lower mounting heightsComparable Traditional Light Source: 2 Lamp T5H0 Vapor Tight LuminaireVoltage (V): 120-277Frequency (Hz): 50/60Input Current (mA): 120 V / 340 mAIn-rush current: 50 ADimming: 0-10 VBeam Angle: 112°Environment: Wet Locations (IP65)Mounting: Surface/SuspendedWarranty: Limited 5-year warranty

Wattage (W): 40Colour temperature (K): 4 000CRI: 82Average life in hours: 50 000Lumens: 5 200Efficacy with lens (LPW): 130

-30°C to + 40°C (-22°F to + 104°F)

120 V 4.7%277 V 15.7%347 V -480 V -

120 V >0.97277 V >0.92347 V -480 V -

CAN ICES-005 (A) / NMB-005 (A)This lighting equipment complies with Canadian standard ICES-005; for use in commercial applications.

Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.

December 13, 2016

ORDERING INFORMATION

PHOTOMETRICS - BEAM SPREAD*

PHOTOMETRICS - COEFFICIENTS OF UTILIZATION (ZONAL CAVITY METHOD)*

PHOTOMETRICS - CANDELA DISTRIBUTION*

Technical Information Bulletin LED Vapor Tight Luminaire

The attached data is provided to assist users in making lighting decisions based on various assumptions, factors and methods. Resources and efforts have been put in place to account for the data and the development of this tool however STANDARD does not warrant or guarantee that the results obtained will be accurate under actual use conditions. A lighting layout is recommend to ensure the proper light levels are attained to satisfy the demand of the application

Vertical spread -Horizontal spread -

Height Footcandle Beam Diameter

2'

4'

6'

8'

10'

4.9' 5.7'

9.8' 11.5'

14.7' 17.2'

19.6' 23.0'

24.5' 28.7'

440.5

110.1

48.9

27.5

17.6

101.6°110.3°

Order code: 65056Description: LSV/S2/40W/40K/2/DD1/FP/STDUPC: 69549650565Case quantity: 1Luminaire description: LED Vapor Tight Luminaire

170° 160° 150° 140°

VA: 0° 10° 20° 30° 40°

130°

120°

110°

100°

90°

80°

110°80°

70°

60°

50°

Polar Candela Distribution

-0°H -90°H

1 8001 500

1 200

900

600

300

CD: 0

300

600

9001 200

1 500

1 800

Data is based upon tests performed in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice.

December 13, 2016

ORDERING INFORMATION

TECHNICAL DRAWINGS

DIMENSIONS

Technical Information Bulletin LED Vapor Tight Luminaire

WARNINGS

INCLUDED

The attached data is provided to assist users in making lighting decisions based on various assumptions, factors and methods. Resources and efforts have been put in place to account for the data and the development of this tool however STANDARD does not warrant or guarantee that the results obtained will be accurate under actual use conditions. A lighting layout is recommend to ensure the proper light levels are attained to satisfy the demand of the application

Qty Description Price

I accept the specifications of the luminaire configuration mentioned above.

Name:Company:Signature: Date:

• Installation and maintenance must be performed by licensed electricians only.• To avoid risk of electric shock, make sure to turn off main power switch prior to installation or maintenance.• Must be installed in compliance with Canadian Electrical Code in Canada or National Electrical Code (NEC) in the US.• Make sure input voltage and frequency are compatible with the fixture. Check installation guide for power requirements prior to installation.

WARNING – Risk of electric shock. Suitable for damp locations.

Cable gland kit & Stainless steel mounting hardware accommodates flush (wall/ceiling) Mounting applications.

Order code: 65056Description: LSV/S2/40W/40K/2/DD1/FP/STDUPC: 69549650565Case quantity: 1Luminaire description: LED Vapor Tight Luminaire

Length: 50.79" (129 cm)Width: 6.39" (16.23 cm)Depth: 3.86" (9.8 cm)Weight: 8.80 lbs (4 kg)

DESCRIPTION

A luminaire ideal for a variety of industrial, commercial, vandal resistant and residential applications. The housing is sealed with a uniform gasket that blocks the ingress of moisture and dust and reinforced snap clips lock the luminaire together. Polycarbonate construction makes the luminaire lightweight, �exible, vandal resistant and highly impact resistant. As well, the UV stabilized polycarbonate housing and lens with LED di�using pigment is impervious to rust or rot and is una�ected by extreme temperatures. Installed either indoors or outside, the VP4-L provides superior light distribution. Our standard color temperature is 40k, however other color temperatures are available upon request.

FEATURES

• Lightweight, �exible and durable polycarbonate construction• Integral gasket forms uniform, long-life seal around the entire enclosure• Stainless steel mounting hardware for wall, ceiling or suspended mounting

• Multiple conduit knockouts in housing ends• Flush mount

• Row mount aligners molded into housing ends• UV stabilized lens with LED di�using pigments• Sealed strain relief/cable gland kit included

DIMENSIONS

VP4-L

VAPOR TIGHT LINEAR FIXTURELED

VP4 L

Series Lamp type Wattage Voltage Color temperature Options

VP4 L - LED A1 - 40W (3600 lumens)A2 - 54W (5509 lumens)A3 - 75W (7200 lumens)

2 -120-277V8 - 347V

40K - 4000K50K - 5000K

DIM1 - Dimming driver 0-10VL6 - 6' cable lengthL10 - 10' cable lengthSS - Stainless steel latchesOSI - Occupancy sensor (ON/OFF)ODIM - Occupancy sensor Bi-level dimmingEM - Emergency backup (from 0°C - 25°C) 120/277V onlyCL* - Cold location (-40°C)*KV - 10kV Surge protector

* Consult factory.

3-3/4"

36"

6-1/2"

50-1/4"

ORDERING GUIDE

Approvals:CSA Certi�ed Suitable for damp & wet locations.

IP RATING

65

Project: Contractor:

50.79" (129 cm)

38" (96.5 cm)

3.86" (9.8 cm)

6.5" (16.5 cm)