technial sheet - holarb) door handles on backplate -levers on backplate -spindle – length of the...
TRANSCRIPT
technial sheet
Technical and information sheet of HOLAR
Information and history of the trademark Holar
Dear customers,
We would like to introduce you our trademark Holar along with its products. Holar is owned by
the company Čegan s.r.o. and was founded in 1990 with focus on production and distribution of
plastic door hardware. Manufacture of Holar products forms an important part of our
thermoplastic factory production. Holarstarted engaging in production of stainless steel1.4301 (AISI
304)door hardwaresince 1999 with bringing the products on the market in 2001 as a first company in
the Czech Republic. The range of products includes joinery hardware (solid and hollow options), door
handles and accessories, glass fitting. In 2013 Holar has introduced a unique product range of
Crystal glass. This unique design hardware made from lead glass reflects the development and
creativity of our designers and technicians.
From the outset Holar gained a strong position in the market. Our products are well known for
their precision and high quality which is derived from the skilled work of our employees and
individual approach. All Holar manufacturing activities are part of its holding company Čegan
holding a.s. Čegan s.r.o. is a major employer of disabled workers (ZPS) therefore can offer trading and
cooperation with reaching ZPS employment quota to their business partners.
Many domestic and foreign companies found Holar a reliable and serious business partner.
Holar distribution is not limited to the domestic market and distributes a significant part of
production abroad (Slovakia, Austria, Hungary, Turkey, Bosnia and Herzegovina, Croatia, etc.).In the
Czech Republic and Slovakia are Holarproducts offered through network of wholesale and retail
partners.
Our mission is to satisfy customer needs with a wide portfolio of products which are suitable for
interiors including apartments and family homes up to big industrial buildings. Our flexibility and
advanced technical facilities give us advantage to meet atypical requirements for joinery hardware.
Kind regards
The team at Holar
2
Contents Information and history of Holar ......................................................................................................... 1
Symbols, abbreviations, version and type of hardware ......................................................................... 3
Information about material and quallity ................................................................................................ 4
Stainless steel ...................................................................................................................................... 4
Plastic .................................................................................................................................................. 4
Free -lead crystal glass ........................................................................................................................ 4
Warranty .............................................................................................. Chyba! Záložka není definována.
Standards and certifications .................................................................................................................... 5
Package content ..................................................................................................................................... 5
a) levers and knob on rose .................................................................................................................. 5
b) levers and knobs on backplate ........................................................................................................ 6
Split washer ............................................................................................................................................. 6
Wood swatches - Wood Steel series ....................................................................................................... 6
Purchase options ..................................................................................................................................... 6
Collection methods and delivery time .................................................................................................... 6
Warranty and warranty claim ................................................................................................................. 7
Price and desriptions of product ............................................................................................................. 7
Tips and recommendations ................................................................. Chyba! Záložka není definována.
Door thickness ..................................................................................................................................... 7
What is to be specified when ordering Holar products ................................................................... 7
a) Plastic and stainless steel handles on rose/on backplate ........................................................... 7
b) Door pulls .................................................................................................................................... 8
c) Custom production ...................................................................................................................... 8
d) Suitable hardware combinations for glass door ......................................................................... 8
Fixing instructions for handle on rose/on backplate and door pull one-sided/two-sided ..................... 8
Installation template .......................................................................................................................... 9
Maintenance and care for Holar hardware ................................................................................... 11
Chart with standard centers ................................................................................................................. 11
Contact .................................................................................................................................................. 12
3
Symbols, abbreviations, version and type of hardware
Chart of versions and combination of HOLARhardware Catalogue
abbreviations
BB
Buntbart Set for lever key mortice lock
KR- round rose HR- square rose OR - oval rose MA - macho crystal TC- techno crystal JD- jedi crystal GE- gentl. crystal MG - macho globe MC - macho cube MP - macho pull JP- jedi pull MT - metal tube ME - metal extra MC - metal cube SS- security steel RS- roayal steel WS - wood steel MS - metal solid MSK – knob DM-demi metal
PZ
Profilzylinder Set for cylinder lock, FAB
WC
set
Set with a bathroom lock – the door must have special bathroom lock with square hole 6x6(mm) or
8x8 (mm)
KL.-KO
left Handle is directed to the left
KL.-KO
right Handle is directed to the right
Symbols from the catalogue
Hardware contain fixing legs and steel washers which guarantee stability and long lifespan
ISO 9001
Class of application 1, 3 and 4 according European norm EN 1906 Eco-nomic range of products – tube thickness 0,8 mm
Massive – solid/massive fittings extremely resistant and stable Changeable measures on request
4
Type and versions of Holarhardware
Typeof hardware version Type of hardware version
handle-handle two-sided knob-knob fixed/moveable
handle-knob fixed/moveable knob- blind rosette fixed/moveable
handle-door pull single-sided door pull-door pull two-sided
handle-blind rosette single-sided door pull- blind rosette single-sided
Information about material and quality
Stainless steelEN 1.4301(AISI 304)
Our stainless steel range is made exclusively from DIN 1.4301 stainless steel. It’s available in matt
and glossy finish.
Stainless steel stands out for its resistance against corrosion and mechanical damage. When the
product is used correctly it stays free of any damage.
Different surface finishes are available by applying a top layer to the stainless steel core.
Gold - Titan-nitride (TiN)–is extremely hard ceramic material which protect surface and
therefore improve resistance of product. Health harmless non-toxic material.
Black chrome – layer of chrome is bonded to steel by galvanization. High abrasion resistance,
aesthetically pleasing and non-toxic to humans.
Plastic
All plastic products are made in our own thermoplastic factory which works with a complete range of
plastic materials. PA6 (polyamide, nylon), ABS–tough and durable plastic, PP (polypropylen) is mainly
used for joinery hardware.
Standard colours for plastic hardware are brown, beige and white.
In the range Klasik are the standard colours extended with a black colour.
For an additional fee a custom made product can be made in a further seven different colours.
Free -lead crystal glass
Our Crystal glass hardware is made from lead free soda-potassium glass which is
well known for its high refractive index. Products are highly transparent, elegant,
clear and harmless to health. Clear glass design is the latest trend in interior and
decorating industry.
Warranty
Holar door hardware products are covered by 24 months warranty. Warranty excludes improper
installation or failure to follow fitting instructions, abuse or misuse of the product and use of the
product for purpose which the product was not design. Extended warranty can be also provided to all
Holar products.
5
Standards and certifications
All manufacturing operations are certified according to ČSN EN ISO 9001:2009, by company CQS
a) Interior design hardwareHolar crystal glassis in Usability class 1.
b) Holar stainless steel hardwareis in Usability class 3.
c) Hardware Metal tube and Metal extra are within Usability class 4.
d) Safety hardware range - Massive Holarmeets Usability class 3.
e)Safety hardware range- Massive Extremmeets Usability class 4.
Package content
a) Door handles on rose
- Levers on rose
- Escutcheons plates (according to requirements for key hole, with a plastic range
both varieties are included)
- Spindle – length of the spindle depends on thickness of individual door
- mounting accessories (machine screws, wood screws, allen key, grub screws and
mounting template)
+
6
b) Door handles on backplate
- Levers on backplate
- spindle – length of the spindle depends on thickness of individual door
- mounting accessories (machine screws, allen key and grub screws)
Wood swatches - Wood Steel
Door handles in the Wood steel range are available in several different type of wood, thus ensuring
you can find the right fit to your interior.
Purchase options
There are many ways how to purchase any of HOLAR products:
- Via fax, phone or email
- from the e-shop (www.holar.cz)
- in person in the HOLAR workshop at Čegans.r.o. headquarters
- place an order after individual consultation with one of our sales representative
- via network of business partners
Collection methods and delivery time - purchased products can be collected from the Holar workshop which is located at Čegans.r.o.
headquarter.
- standard delivery (Česká pošta, DPD), free delivery on purchase over CZK 2000
7
- via sales representative (must be arrange in advance)
- Standard hardware is always stock in our warehouse (located nearby Holar workshop)
therefore can be picked immediately or delivered within 5 working days.
- Custom made hardware (atypical design) can take up to 1- 4 weeks (dependent on individual
requirement).
Warranty and warranty claim
- In case of warranty claim you will need to fill out a Warranty claim form and present a proof of
purchase (invoice, receipt, delivery docket)
- Holar warranty excludes improper installation or failure to follow fitting instructions, abuse or
misuse of the product, use of the product for purpose which the product was not design.
-
Price and descriptions of product
- Price without GST are listed in a special pricelist
- Standard price of Holar door hardware covers the full set with mounting accessories
includedin price
- Crystal glass package also contain floor or wall door stop 01
- As for the plastic hardware the price in the pricelist covers only standard colours (brown, white
and beige),other colours are available with additional charge of 75% from the standard price
ready for pick up or delivered within 3 weeks.
- Price of door pulls in U, G, B, C and F range is always for couple(two-sided pull) if only single
door pull(one-sided) is required the cost is counted as a 75% from the price of two- sided pull.
- Price of door pull in P range is for single door pull (one-sided)
- All mounting accessories are part of the package and therefore are included in the price. Blind
rosette is also included with one-sided door pulls.
- To get pricing for atypical door pulls please email on [email protected]
Tips and recommendations
Door thickness
If the thickness of your door is not 38-43mm it is necessary to state the exact dimension when
submitting your order so we can match your door hardware with the right spindle and screws.
Standard length of spindle is 110mm.
What is to be specified when ordering Holarproducts
a) Plastic and stainless steel handles on rose/on backplate
When ordering stainless steel handles on rose it is essential to state variety (PZ, BB or WC) and shape
of rosette (round, square, oval). Plastic door hardware is supplied with both BB and PZ rosette.
When ordering stainless steel on backplate you need to state the variety of key/locker system (PZ, BB
or WC) and centre to centre dimension.Standard dimensionin the Czech Republic is 72/90mm.
8
When ordering a handle–knob combination it is essential to state the orientation of the handle
(right/left) and version of knob (fixed/moveable). Standard handle–knob combination in stainless
steel range is supplied with knob models MSK01 a MSK08. Different knob models are available for an
additional fee.
What is right and left handle orientation?
Handle orientation is essential when ordering combinations handle-knob or door pull- knob. The
orientation is accessed by facing the side of the door where is the handle going to be mounted.
b) Door pulls
When ordering door pulls you need to state the required model. In case an atypical model is required
it is best to provide the sketch with all dimensions, profiles and mounting possibilities. One-sided
door pulls come with blind rosette included in the price.
c) Custom production
Our custom production can make just about any design for stainless steel hardware (door hardware,
bathroom accessories, house numbers, pictograms etc.). When ordering custom made products it is
necessary to provide the sketch with all dimensions and profiles. Based on the sketch we will
estimate the price for the product.
d) Suitable combinations for glass doors
Holar door hardware can be used with glass doors. Especially the Crystal Glass door hardware with
its unique design that makes a great addition to any glass doors. Crystal glass door handles are
supplied without top and bottom rosette.
Fixing instructions for handle on rose/on backplate, one-sided and two-side door pull
Mounting of handle on rose
HOLAR handle on rose is fixed to a door with 2 machine screws, which are screwed thorough the
door. In the mounting template (part of packaging) you can see exactly whereto drill holes for the
machine screws. The holes must be drilled exactly as it states in template using drill with a diameter
of 8mm making sure the spindle is well centered (both sides are evenly deep in lever). First tighten
9
the spindle to the handle and then insert the spindle through the latch in the door. Instal the other
handle by sliding the handle over the spindle already through the door.If the machine screws need to
be shorten (depend on the door thickness) do it now and then insert the adjusted srews into pre-
drilled holes (see mounting template). Put nuts on the screws inserted through door and tighten
them up and then tighten grub screw on the handle. Finally put a blind rosetteon the clip-on rosette.
Escutcheons plates are not under mechanical stress therefore they can be fixed on a cylinder lock or
keyhole with two wood screws (part of packaging).
Istructions for WC rosette (turn knob) instalation are the same as the handle on rose. The WC rosette
is fixed to a door with 2 machine screws. Follow
istructions in mounting template.
As long as mounting instructions are followed
correctly there is no need to use any adhesives.
Adhesives are not part of packaging and if you still
decide to use some we can’t guarantee you be able
to remove installed door hardware from the door
when needed.
To make sure all parts in mechanism sit and work
well, we recommend you occasionally tighten all
screws. How often you have to do so is hard to tell
and its very individual (depends on installation,
door weight, use frequency). Do not over tighten
the grub screw it would interfere with right
movement of the handle
What is the pitch?
Pitch is distance between the middle of the lever hub down to the
middle of locker hub.
Mounting template for handles on rose
10
Mounting of handle on backplate
HOLAR handle on plate is fixed to a door with two wood
screws (with object fitting can be wood screws replace with
machine screws, which go through the door and offer a secure
fixing). Mounting of handle on plate is easier then rosette
hardware and can be completed without a mounting template.
After you tightened wood screws to finish installation you need
to tighten grub screws on a both levers.
Mounting of one-sided door pull
Drilling holes:
1) Screw through door-recommended for pull side of the door
For wooden, metal and plastic door - Ø 8 mm
For glass door – Ø 13 mm
- Drill holes through the door - Put a washer on screw and insert the screw thorough the
drilled hole, put another washer and screw it into a door pull. - Screw a clip-on rosette on the door the way it hides the head of
the main screw and then clip on blind rosette.
2) Not screw through - Drill hole into the door (not through)
Metal door -with tap cut a thread in the drilled hole for screw M8 Wooden door -Ø 10 mm,in order to fit in a screw anchor(dowel) Plastic and profile door -in order to fit in a rivet nut for M8
- Put „fixing element” spool on the screw - Screw with „fixing element“ screw into a door - Fit door pull onto both „fixing elemet“ and tighten grub screw
on each side of the door pull with an Allen key -
Mounting of two-sided door pull
MIND!! THE SCREW THROUGH DOOR PULL MUST BE MOUNTED ON THE TENSION SIDE OF THE DOOR!!
Holes drilling For wooden, metal and plastic - Ø 8 mm For glass door – Ø 13 mm Drill holes through a door.
- Insert screws through the drilled holes, put “fixing element” on inserted screws on the tension side of the door and screw both screws into a door pull. With a glass door you have to put plastic glands in to the holes before you insert screws.
- Fit door pull onto both “fixing element” and tighten grub screw on each side of the door pull with an allen key.
11
Maintenance and care for Holarhardware After installation it is necessary to clean the hardware with cleansing cream. Cleaning should be done regularly. Clean with warm water, gentle cleansing cream and soft absorbent cloth. Cleaning and maintenance: To clean HOLARhardware you can use many of household cleaning products. Make sure they are no-abrasive liquid products suitable for stainless steel (Franke Twister or Franke Sunshine, TORO, CIF, etc.), or ammonia - based products.
Avoid: Do not use any of following:
Steel scourer
Steel wool
Cleansing product for silver
Bleach and desinfection
Polish removal
Acid concentrate
lye
dry cleansing powder or abrasive product (sand based)
products containing carbon dioxide
product containing chlorine or its derivate (coating removals and product for cleaning paint brushes ),
If stainless steel products get in contact with acid it is necessary to wash the product with plenty of warm water and then dry the product with dry cloth.Stains caused by ink, oil or paint must be cleaned immediately. If it’s hard to clean those stains with warm water and recommended cleansing product,use soft cloth, soaked with denatured alcohol and then wash with warm water.
Stainson stainless steel are usually caused by deposits on surface. It is not a damage of the material. The most common is formation of a thin layerof water deposits on a surface which can progress into brown stains (similar to rust). You can prevent this formation by drying the product when wet. If the thin layer is already formed you can clean it with wet cloth and liquid cleansing cream.
Returning “rusty” stains In case of recurring rusty stains, especially in a new buildings or recently reconstructed, check if product is not close by some deposits (part of bricks, metal chips, sand and grout) which cause water pollution and subsequent stain formation. Durable stains can be removed with a gentle polish. Limestone sediments can be removed with 9%acetic acid.
Chart with standard pitch
Use with a correct load
Do not abuse the product
Clean only with wet and soft cloth
Prevent contact with sharp and harsh objects
Correct installation by following the
mounting template
Do not use with a chlorine product
Use door stop
Do not use with abrasive materials
Door hardware is certified under ČSN 1906, and is design to be used with standard door up to 40kg without door closer.
Chart of standard pitch (distance between the middle of the lever hub down to the middle of locker hub). We offer all main European pitch.
CZ-SK A (O-NORM) D (D-NORM) H SLO-HR PL NL
Pitch 72/90 90/88 72/92/78 55/72/90 72/90 55/72/85/90 55/72
spindle 8x8 8,5x8,5 8x8/10x10 8x8 9x9 8x8 8x8
spindle WC 6x6 7x7 8x8 8x8 7x7 8x8, 4x4 8x8
12
Contacts
Adresa: Čegan s.r.o., provozovna HOLAR
Husova 35, Šlapanice 664 51, Czech Republic
IČO: 26274744
DIČ: CZ26274744
PH.: +420 544 422 084
Email orders:[email protected]
Email info: [email protected], [email protected]
Web: www.holar.cz, www.holardesign.cz, www.cegan.cz
Sales representatives:
Region Czech, Slovakia and Austria, Jan Nečas, Ph.: +420 776 549 991, email:[email protected]
Foreign regions: Eva Čeganová, Ph.: +420 606 403 706, email: [email protected]
technical sheet
Čegan s.r.o.Husova 35, 664 51, Šlapanice
Czech Republic
tel.: +420 544 422 084gsm CZ: +420 606 531 978gsm SK: +421 911 178 937
email: [email protected]
www.holar.cz www.holar.biz