techni-flo · tfg100-atf aluminium ptfe tfg100-abn aluminium buna tfg100-stf ss ptfe. techni-flow...
TRANSCRIPT
Techni-flow ® PUMPS
-AIR OPERATED DIAPHRAGM PUMPS-DRUM END BARREL PUMPS-PERISTALTIC PUMPS
[email protected] ://www.pompe-techni-flow.com
Techni-flow pumps TFG025 1/4"
SPECIFICATIONS
Maximum flow of water 18,9l/mnMaximum diameter of particles 1.5 mmMaximum fluid pressure 7 bar3m maximum suction vacuumEntered and outlet product 1/4 "npt hybrid / bspAir inlet 1/4 "Air exhaust 1/4 "
Material of the body fluid sideAcetal carbon charge (Atex)PolypropylenePvdf
Material elastomers fluid sidePTFESantoprene
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG025-PTF POLYPROPYLEN PTFE
TFG025-PSP POLYPROPYLEN SANTOPRENE
TFG025-ACTF ACETAL PTFE
TFG025-KTF PVDF PTFE
Techni-flow pumps TFG100 1/2"plastic SPECIFICATIONS
Maximum flow of water 57l/mnMaximum diameter of particles 2,5mmMaximum fluid pressure 7 bar3,7m maximum suction vacuumEntered and outlet product 1/2+3/4"Air inlet 1/4''Air exhaust 1/4"Material of the body fluid sideAcetal carbon charge (Atex)PolypropylenePvdf
Material elastomers fluid sidePTFESantoprèneBUNA
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM MaterialS
TFG100-PTF POLYPROPYLENE PTFE
TFG100-PSP POLYPROPYLENE SANTOPRENE
TFG100-PBN POLYPROPYLENE BUNA
TFG100-KTF PVDF PTFE
Techni-flow pumps TFG100 3/4" SPECIFICATIONS
Maximum flow of water 61 l/mnMaximum diameter of particles 2,5mmMaximum fluid pressure 7 barmaximum suction vacuum 3,4m Entered and outlet product 3/4"Air inlet 1/4"Air exhaust 3/8"Material of the body fluid sideAluminium (atex)ss (atex)
Material elastomers fluid sidePTFESantoprèneBUNA
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG100-ATF ALUMINIUM PTFE
TFG100-ABN ALUMINIUM BUNA
TFG100-STF ss PTFE
Techni-flow pumps TFG200 1"métallic SPECIFICATIONS
Maximum flow of water 189l/mnMaximum diameter of particles 3,2mmMaximum fluid pressure 8,6 barmaximum suction vacuum 4,9m / 8,8 Entered and outlet product 1"Air inlet 1/2"
Material of the body fluid sideALUMINIUM (atex)ss (atex)
Material elastomers fluid sidePTFESantoprèneBUNA
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG200-ATF ALUMINIUM PTFE
TFG200-ABN ALUMINIUM BUNA
TFG200-STF ss PTFE
Techni-flow pumps TFG200 1"Plastic SPECIFICATIONS
Maximum flow of water 189l/mnMaximum diameter of particles 3,2mmMaximum fluid pressure 8,6 barmaximum suction vacuum 4,9m / 8,8 mEntered and outlet product 1" flanges
ANSI/DINAir inlet 1/2"
Material of the body fluid sidePolypropylenePvdf
Material elastomers fluid sidePTFESantoprène
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG200-PTF POLYPROPYLEN PTFE
TFG200-PSP POLYPROPYLEN SANTOPRENE
TFG200-KTF PVDF PTFE
Techni-flow pumps TFG400 1"1/2Métallic SPECIFICATIONS
Maximum flow of water 378,5l/mnMaximum diameter of particles 4,8mmMaximum fluid pressure 8,4 barmaximum suction vacuum 6m Entered and outlet flanges 1"1/2
Air inlet 1/2Air exhaust 3/4"Material of the body fluid sideAluminium (atex)ss
Material elastomers fluid sidePTFESantoprèneBuna
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG400-ATF ALUMINIUM PTFE
TFG400-ASP ALUMINIUM SANTOPRENE
TFG400-ABN ALUMINIUM BUNA
TFG400-STF ss PTFE
Techni-flow pumps TFG400Plastic SPECIFICATIONS
Maximum flow of water 378,5l/mnMaximum diameter of particles 4,8mmMaximum fluid pressure 8,4barmaximum suction vacuum 6,1m vacuumEntered and outlet flanges 1"1/2
Air inlet 1/2"Air exhaust 3/4"
Material of the body fluid sidePolypropylenePvdf
Material elastomers fluid sidePTFESantoprène
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG400-PTF POLYPROPYLEN PTFE
TFG400-PSP POLYPROPYLEN SANTOPRENE
TFG400-KTF PVDF PTFE
Techni-flow pumps TFG800 2"Métallic SPECIFICATIONS
Maximum flow of water 568l/mnMaximum diameter of particles 6,3mmMaximum fluid pressure 8,4 barmaximum suction vacuum 6,3m vacuumEntered and outlet product 2"Air inlet 1/2"Air exhaust 3/4"
Material of the body fluid sideAluminiumss
Material elastomers fluid sidePTFESantoprèneBuna
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG800-ATF ALUMINIUM PTFE
TFG800-ASP ALUMINIUM SANTOPRENE
TFG800-ABN ALUMINIUM BUNA
TFG800-STF ss PTFE
Techni-flow pumps TFG800Plastic SPECIFICATIONS
Maximum flow of water 568l/mnMaximum diameter of particles 6,3mmMaximum fluid pressure 8,4barmaximum suction vacuum 6,1m Entered and outlet product 2" flanges ANSI/din
Air inlet 1/2"Air exhaust 3/4"Material of the body fluid sidePolypropylenePvdf
Material elastomers fluid sidePTFESantoprène
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG800-PTF POLYPROPYLEN PTFE
TFG800-PSP POLYPROPYLEN SANTOPRENE
TFG800-KTF PVDF PVDF
Techni-flow pumps TFG1500 3" SPECIFICATIONS
Maximum flow of water 1041l/mnMaximum diameter of particles 9,4mmMaximum fluid pressure 8,4 barmaximum suction 2,4m vacuumEntered and outlet product 3"flanges ANSI/DIN
Air inlet 3/4"
Material of the body fluid sideAluminium
Material elastomers fluid sidePTFESANTOPRENEBUNE
CURRENT REFERENCES:
REFERENCE BODY Material DIAPHRAGM Materials
TFG1500-ATF ALUMINIUM PTFE
TFG1500-ASP ALUMINIUM SANTOPRENE
TFG1500-ABN ALUMINIUM BUNA
Techni-flow ® PERISTALTIC PUMPS
DISTRIBUTED BY
PRINCIPLE OF OPERATIONThe principle of operation of the peristaltic pump is attractive because of its simplicity and its benefits. A tube with precise dimensions, made from different types of elastomer or thermoplastic, is housed in the pump body.After being compressed by the action of the pad or roller attached to the rotor, the tube recovers its original shape and creates a phenomenon which will empty the suction of the liquid. The liquid is then in the space between the two rollers and is gently pushed to the opposite side to the suction. That is why this displacement pump has many advantages.
PKEY FEATURES:- --Self priming up to 9 m- --Runs dry without damage-n-No seal- --Reversible rotation
- metering Applications + - 1%- Easy and Economical Maintenance- Resistant to corrosion-Silent-Easy to clean- Resistant to abrasion
TF-DS-MFlow from 4ml/mn to 1400ml/mn
AMP-10 21 a 151 l/hAMP-13 34 à 248l/hAMP16 81 a 580l/hAMP19 105 à 767l/hAMP22 250l/h à 1075 l/h
P MAXI 8 BARConnection asp/ref 3/8"Connection asp/ref 3/8"Connection asp/ref 3/4"Connection asp/ref 1"Connection asp/ref 1"
FMP30 468 à 1716l/hFMP40 990 à 3630 l/hFMP50 1240 l/h à 5100l/h FMP60 3.5m3/h à 13m3/hFMP70 5.6 m3/h à 26.8m3/h
P MAXI 8 BARConnection asp/ref 1"1/4Connection asp/ref 1"1/2Connection asp/ref flange ND40 dinConnection asp/ref flange ND50 dinConnection asp/ref flange ND60 din
RBT25 324l/h à 1224 l/hRBT32 828l/h à 2737 l/hRBT40 1790l/h à 4872l/hRBT 60 4 M3/h à 11m3/hRBT 70 5.4 M3/H à 16m3/h
P MAXI 15 BAR
Connection asp/ref flange ND25 dinConnection asp/ref flange ND32 dinConnection asp/ref flange ND40 dinConnection asp/ref flange ND60 dinConnection asp/ref flange ND65 din
SANITARY PUMPS Tri-clamp Sanitary connection
APPLICATIONS EXAMPLES:-Sludge - lime milk , mortar, filter press feeding, carbonates, ....-Paints, glues, inks, latex, pigments, oils, detergents, acids, peroxides, ...-Dairy, wine, sauces, jams, mayonnaise, meat, fruit juice.
Techni-flow ® DRUM PUMPS WITHE
POLYPROPYLENE BODY
DISTRIBUTED BY
Caractéristics Pumps body High pressure High flowIMPELLERTube diameter maxi mmFluid Temperature maxi °CMaterial: pump body. : impeller. hose connection :(delivered as standard other diameter on request)
HP4150POLYPROPYLENEPOLYPROPYLENE
DN 25
LP4150POLYPROPYLENEPOLYPROPYLENE
DN25
nominal dimension 700 mm*shaft ssCote nominale 1000 mm* shaft ssCote nominale 1200 mm* shaft ssCote nominale 700 mm* shaft HCCote nominale 1000 mm* shaft HCCote nominale 1200 mm* shaft HC
10-10110-10310-10510-10710-10910-111
10-10210-10410-10610-10810-11010-112
TF-PP-700-HP-STF-PP-1000-HP-STF-PP-1200-HP-STF-PP-700-HP-HCTF-PP-1000-HP-HCTF-PP-1200-HP-HC
TF-PP-700-BP-STF-PP-1000-BP-STF-PP-1200-BP-STF-PP-700-BP-HCTF-PP-1000-BP-HCTF-PP-1200-BP-HC
Motor TF150Tension 230V 50HZPover: 250WWithout speed condrol REF TF150With speed condrol REF TF150-VF
Flowdischarge headViscositydensity
40 l/mn9 m ce1001.4300
50 l/mn5 mce1001.1200
Motor TF180Tension 230V 50HZPover: 600WWithout speed condrol REF TF190With speed condrol REF TF190-VF
Flow discharge headViscositydensity
6416 mcw6001.8
888 mcw4001.3
Motor TF280Tension 230V 50HZPover: 825WWithout speed condrol REF TF280With speed condrol REF TF280-VF
Flow discharge headViscositydensity
902810001.9
160146001.4
Motor TF400 ATEXTension 230V 50HZPover: 550WWithout speed condrol REF TF400Eex de II A T6 IP 54
Flow discharge headViscositydensity
6416 mcw6001.8
888 mcw4001.3
AIR Motor TF-AIR3 ATEX
Pover: 450WFlow discharge headViscositydensity
6027600 cpo1.8
12010300cpo1.3
ACCESSOIRE:-Nozzle polypropylène-Nozzle PVDF-Nozzle ss-Nozzle nickel-plated brass
-Flowmetre polypropylène-Flowmetre pvdf-Flowmetre ss
Techni-flow ® DRUM PUMPS WITHE PVDF BODY
DISTRIBUTED BY
Caractéristics Pumps body high pressure High flowIMPELLERTube diameter maxi mmFluid Temperature maxi °CMaterial: pump body. : impeller.hose connection :(delivered as standard other diameter on request)
HP4150PVDFETFE
DN 25
LP4150PVDFETFE
DN25
Cote nominale 700 mm* shaft HCCote nominale 1000 mm* shaft HCCote nominale 1200 mm* shaft HC
10-11310-11510-117
10-11410-11610-118
TF-PV-700-HP-HCTF-PV-1000-HP-HCTF-PV-1200-HP-HC
TF-PV-700-BP-HCTF-PV-1000-BP-HCTF-PV-1200-BP-HC
Motor TF150Tension 230V 50HZPover: 250WWithout speed condrol REF TF150With speed condrol REF TF150-VF
Flow discharge headViscositydensity
40 l/mn9 m cw1001.4300
50 l/mn5 mcw1001.1200
Motor TF180Tension 230V 50HZPover: 600WWithout speed condrol REF TF190With speed condrol REF TF190-VF
Flow discharge headViscositydensity
6416 mcw6001.8
888 mcw4001.3
Motor TF280Tension 230V 50HZPover: 825WWithout speed condrol REF TF280With speed condrol REF TF280-VF
Flow discharge headViscositydensity
902810001.9
160146001.4
Motor TF400 ATEXTension 230V 50HZPover: 550WWithout speed condrol REF TF400Eex de II A T6 IP 54
Flow discharge headViscositydensity
6416 mcw6001.8
888 mcw4001.3
AIR Motor TF-AIR3 ATEX Pover: 450W
Flow discharge headViscositydensity
6027600 cpo1.8
12010300cpo1.3
ACCESSORIES:-Nozzle polypropylène-Nozzle PVDF-Nozzle ss-Nozzle nickel-plated brass
-Flowmetre polypropylène-Flowmetre pvdf-Flowmetre ss
Techni-flow ® DRUM PUMPS WITHE ss BODY
DISTRIBUTED BY
Caractéristics Pumps body high pressure High flowIMPELLERTube diameter maxi mmFluid Temperature maxi °CMaterial: pump body. : impeller.hose connection :(delivered as standard other diameter on request)
HP4150ssETFEDN 25
LP4150ssETFEDN25
Cote nominale 700 mm* shaft ssCote nominale 1000 mm* shaft ssCote nominale 1200 mm* shaft ss
10-11910-12110-123
10-12010-12210-124
TF-SS-700-HP-STF-SS-1000-HP-STF-SS-1200-HP-S
TF-SS-700-BP-STF-SS-1000-BP-STF-SS-1200-BP-S
Motor TF150Tension 230V 50HZPower: 250WWithout speed condrol REF TF150With speed condrol REF TF150-VF
Flow discharge headViscositydensity
40 l/mn9 m cw1001.4300
50 l/mn5 mcw1001.1200
Motor TF180Tension 230V 50HZPover: 500WWithout speed condrol REF TF190With speed condrol REF TF190-VF
Flow discharge headViscositydensity
6416 mcw6001.8
888 mcw4001.3
Motor TF280Tension 230V 50HZPover: 825WWithout speed condrol REF TF280With speed condrol REF TF280-VF
Flow discharge headViscositydensity
902810001.9
160146001.4
Motor TF400 ATEXTension 230V 50HZPover: 550WWithout speed condrol REF TF400Eex de II A T6 IP 54
Flow discharge headViscositydensity
6416 mcw6001.8
888 mcw4001.3
AIR Motor TF-AIR3 ATEX PNEUMATIQUE
Pover: 450W
Flow discharge headViscositydensity
6027600 cpo1.8
12010300cpo1.3
ACCESSOIRE:-Nozzle polypropylène-Nozzle PVDF-Nozzle ss-Nozzle nickel-plated brass
-Flowmetre polypropylène-Flowmetre pvdf-Flowmetre ss
-Strainer polypropylène-Strainer ss
- Hose fluid-neutral- Hose for aggressive media- Hose for flammable fluid
Techni-flow ® DISTRIBUTED BY
Flow curves of drums pumps are for pumping water, with barbed fittings for hose DN 25 mm.
Techni-flow ® pumps Peristaltic pumps for:
Viscous fluids Chemical fluid Sanitary fluid
Drum and barrel pumps: Viscous fluids Chemical fluid Sanitary fluid
[email protected] ://www.pompe-techni-flow.com