Bathtubs CartesioAVAS0980Z00000

Benedini Associati, 2009

Freestanding bathtub

Finishes

Cristalplant® whiteAVAS0980Z00000

Rectangular bathtub in white Cristalplant® with overflow hole. Tap units may be placed onthe edge of the bathtub, on the wall, on the floor or on Agape column Pillar or pillar 2. Watersupply from the inside of bathtub is possible too. Models for freestanding, corner, niche orbuilt-in installations. The bathtub internal measures are 166 x 66 cm (65" 3/8 x 26") and itsedges have a maximum width of 27 cm (10" 5/8). However, other measurements are alsoavailable (minimum width: 5 cm - 2"). The minimum width to install the tapware on the edgeof the tub or an internal water supply is 15 cm (5" 7/8). In addition to the shownconfigurations, several variations are possible. It is mandatory to use waste trap .MET0477(.MET0434 for bathtubs on display). For an easier installation of the bathtubs we recommend to use the template for thepositioning of the waste trap AKITPZVAS.Materials used: Cristalplant®.

Width: 176.0 cm 69" 1/4 inches

Height: 55.0 cm 21" 5/8 inches

Depth: 76.0 cm 29" 7/8 inches

Capacity: 306.0 l 81 gal

Weight: 140.0 kg 309 lbs

Packaging measurements: 90 x 190 x 68 cm 35"3/8 x 74"6/8 x 26"6/8 inches

Weight with packaging: 200.0 kg 441 lbs

TECH SHEETBATHTUBS CARTESIO

AVAS0980Z00000

Agape srl © 2015 — Page 1www.agapedesign.it

Main dimensions

TECH SHEETBATHTUBS CARTESIO

AVAS0980Z00000

Agape srl © 2015 — Page 2www.agapedesign.it

Dimensions for recess

TECH SHEETBATHTUBS CARTESIO

AVAS0980Z00000

Agape srl © 2015 — Page 3www.agapedesign.it

Dimensions for wall mounted taps

TECH SHEETBATHTUBS CARTESIO

AVAS0980Z00000

Agape srl © 2015 — Page 4www.agapedesign.it

Dimensions for freestanding spouts

Dimensions for tap support

TECH SHEETBATHTUBS CARTESIO

AVAS0980Z00000

Agape srl © 2015 — Page 5www.agapedesign.it

Note

TECH SHEETBATHTUBS CARTESIO

AVAS0980Z00000

Agape srl © 2015 — Page 6www.agapedesign.it