tech information - inwall body

18
Product Specifications www.grohe.com RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000 Product description GROHE Rapido SmartBox Universal rough-in box, 1/2" 3 outlets 1/2" 2 inlets below, 1/2" Installation depth 75-105 mm Connection unit in DR brass Pre-mounted flushing plug Stable build-in box and protective cover fixation Options for solid walls and dry cladding gasket without trim-set for final installation

Upload: others

Post on 15-May-2022

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Tech Information - Inwall Body

Product Specifications

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Product description

GROHE Rapido SmartBoxUniversal rough-in box, 1/2"3 outlets 1/2"2 inlets below, 1/2"Installation depth 75-105 mmConnection unit in DR brassPre-mounted flushing plugStable build-in box and protective cover fixation Options for solid walls and dry cladding gasket without trim-set for final installation

Page 2: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

max. 70°

60°

300 ZZ

*14 055

*14 055

Page 3: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Applications

Operation is possible with:

• Pressurised storage heaters

• Thermally/hydraulically controlled instantaneous water heaters

Operation with unpressurised storage heaters (displacement water heaters) is not possible!

Technical data

• Operating pressure:

• Test pressure

max. 1000 kPa

1600 kPa

Note:

This product must be installed in conformance with local codes e.g. AS/NZS 3500 series of standard!

To comply with noise levels if static pressure exceeds 500 kPa, a pressure reducing valve must be fitted.

For the combination with bath filler and overflow sets an approved safety device is prescribed according to EN 1717.

The following must be observed:

• For Grohtherm SmartControl and SmartControl Mixer with two valves the safety device (specialaccessories prod. no.: 14 055) can be screwed in instead of the pre-assembled plug (Z).

• The GROHE Rapido SmartBox must be mounted at least 300mm above the tub edge.

Installation of the box

• Make drill holes for the box and slots for the pipes.

• Installation depth 75-105mm.

• If the box is installed too deeply an extension can be applied.

Installation options, see pages 3-5.

• Installation in studding

• Installation with spacers

• Installation directly on the wall

• Installation in the wall

• Installation on prefabricated house assembly plates or prefabricated shells

Connecting the pipes

The outflows intended for this purpose are to be used.

• Recommended configuration options, see from page 10.

• Non-binding outflows must be sealed with the accompanying plug (X).

• Check connections for water-tightness.

• Plugs (Y) must be assembled, see page 7, Fig. [6].

Apply carrier material as sealant, see page 8, Fig. [9] to [11].

Plaster and tile the wall.

Do not cut the fitting template prior to final installation.

Page 4: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Page 5: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Page 6: Tech Information - Inwall Body

www.grohe.com

5/10/15/20

2.

1.

Ø145mm

1 2 3

54 6

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Page 7: Tech Information - Inwall Body

www.grohe.com

Grohtherm Smart Control

2

1

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Page 8: Tech Information - Inwall Body

www.grohe.com

3

4 5

6

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

3

1 2

2

YH

C

Page 9: Tech Information - Inwall Body

www.grohe.com

30

max

30

7

1.1.2.2.

8

9

*48 263

10 11

min

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Page 10: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

Technical specifications Grohtherm SmartControl

• Flow pressure

50 kPa- Minimum flow pressure without

downstream resistances

- Minimum flow pressure withdownstream resistances

- Recommended

100 kPa

150:500 kPa

5 l/min• Minimum flow rate

• Temperature

max. 70 °C

60 °C

- Hot water inlet

- Recommended for energy saving

- Thermal disinfection possible

• Hot water temperature at supply connection min. 2 °C higher than mixed water temperature

Flow rates without downstream resistances, see page 10-15. These are to be observed when dimensioning the outlet!

• Recommended configuration options, see from page 10.

The following special accessories are available:

• Extension 25mm (prod. no.: 14 048)

• Safety device, only in combination with two valves (prod. no.: 14 055)

• Isolating valves (prod. no.: 14 053)

• Reversed connection, hot on right – cold on left replace thermostat cartridges (prod. no.: 49 003)

Page 11: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

100 200 300 400 500 600

kPa

Page 12: Tech Information - Inwall Body

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

kPa

100 200 300 400 500 600

Page 13: Tech Information - Inwall Body

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

kPa

100 200 300 400 500 600

Page 14: Tech Information - Inwall Body

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

kPa

100 200 300 400 500 600

Page 15: Tech Information - Inwall Body

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

kPa

100 200 300 400 500 600

Page 16: Tech Information - Inwall Body

www.grohe.com

RAPDIO SMARTBOX UNIVERSAL ROUGH-IN BOX MODEL #35602000

100 200 300 400 500 600

kPa

Page 17: Tech Information - Inwall Body

www.grohe.com

48166000

DESIGN +ENGINEERING GROHE GERMANY97.170.231/ÄM 232009/07.14

Page 18: Tech Information - Inwall Body

www.grohe.com

48166000

DESIGN +ENGINEERINGGROHE GERMANY97.170.231/ÄM 232009/07.14

www.grohe.com

48166000

DESIGN +ENGINEERINGGROHE GERMANY97.170.231/ÄM 232009/07.14

www.grohe.com2016/12/14

D& +49 571 3989 [email protected]

A& +43 1 [email protected]

AUS

BG& +359 2 [email protected]

CAU& +99 412 497 09 [email protected]

CDN& +1 888 [email protected]

CH& +41 [email protected]

CN& +86 21 63758878

CY& +357 22 [email protected]

CZ& +420 277 004 [email protected]

DK& +45 44 [email protected]

E& +34 93 [email protected]

EST& +372 [email protected]

F& +33 1 [email protected]

FIN& +358 10 [email protected]

GB& +44 871 200 [email protected]

GR& +30 210 [email protected]

H& +36 1 [email protected]

HK& +852 2969 [email protected]

I& +39 2 [email protected]

IND& +91 124 [email protected]

IS& +354 515 [email protected]

J& +81 3 [email protected]

KZ& +7 727 311 07 [email protected]

LT& +372 [email protected]

LV& +372 [email protected]

MAL& +1 800 80 [email protected]

N& +47 22 [email protected]

NL& +31 79 [email protected]

NZ& +09 573 0490

P& +351 234 529620 [email protected]

PL& +48 22 [email protected]

RI& +62 21 2358 [email protected]

RO& +40 21 [email protected]

ROK& +82 2 559 [email protected]

RP& +63 2 8041617

RUS& +7 495 [email protected]

S& +46 771 [email protected]

SGP& +65 6 [email protected]

SK& +420 277 004 [email protected]

T& +66 2610 [email protected]

TR& +90 216 441 23 [email protected]

UA& +38 44 [email protected]

USA& +1 800 [email protected]

VN& +84 8 5413 [email protected]

BiHAL HR KSME MK SLO SRB

& +385 1 [email protected]

Eastern Mediterranean,Middle East - Africa Area Sales Office:& +357 22 [email protected]

IR OM UAE YEM& +971 4 [email protected]

Far East Area Sales Office: & +65 6311 [email protected]

& +32 16 230660 [email protected]

& +1300 054 945 [email protected]

B

[email protected]

www.grohe.com2016/12/14

D& +49 571 3989 [email protected]

A& +43 1 [email protected]

AUS

BG& +359 2 [email protected]

CAU& +99 412 497 09 [email protected]

CDN& +1 888 [email protected]

CH& +41 [email protected]

CN& +86 21 63758878

CY& +357 22 [email protected]

CZ& +420 277 004 [email protected]

DK& +45 44 [email protected]

E& +34 93 [email protected]

EST& +372 [email protected]

F& +33 1 [email protected]

FIN& +358 10 [email protected]

GB& +44 871 200 [email protected]

GR& +30 210 [email protected]

H& +36 1 [email protected]

HK& +852 2969 [email protected]

I& +39 2 [email protected]

IND& +91 124 [email protected]

IS& +354 515 [email protected]

J& +81 3 [email protected]

KZ& +7 727 311 07 [email protected]

LT& +372 [email protected]

LV& +372 [email protected]

MAL& +1 800 80 [email protected]

N& +47 22 [email protected]

NL& +31 79 [email protected]

NZ& +09 573 0490

P& +351 234 [email protected]

PL& +48 22 [email protected]

RI& +62 21 2358 [email protected]

RO& +40 21 [email protected]

ROK& +82 2 559 [email protected]

RP& +63 2 8041617

RUS& +7 495 [email protected]

S& +46 771 [email protected]

SGP& +65 6 [email protected]

SK& +420 277 004 [email protected]

T& +66 2610 [email protected]

TR& +90 216 441 23 [email protected]

UA& +38 44 [email protected]

USA& +1 800 [email protected]

VN& +84 8 5413 [email protected]

BiHAL HR KSME MK SLO SRB

& +385 1 [email protected]

Eastern Mediterranean,Middle East - AfricaArea Sales Office:& +357 22 [email protected]

IR OM UAE YEM& +971 4 [email protected]

Far East Area Sales Office: & +65 6311 [email protected]

& +32 16 [email protected]

& +1300 054 945 [email protected]

B

[email protected]