tea elesa gravity indicators

7/23/2019 TEA Elesa Gravity Indicators

1/10

Rotary Indicators

T.E.A. Transmissions Pty LtdSpecial Purpose Engineering Supplies

Ph: 07-4129 2533 Fax: 07-4129 [email protected] www.tea.net.au


2/10

276

GA01 GA02 GA05Gravity controlled analogue indicators, for use on control spindles withpositions ranging from horizontal up to 60 inclined.Zinc-plated mild steel case and polished AISI 303 stainless steel bezel.Clear glass window, matte silver anodised aluminium dial with blackgraduations.Counterweight fitted with a sensitive ballrace bearing for improved readingaccuracy.

Standard ratios with clockwise and anti-clockwise rotation:GA01 = 50 mm: 12/1 - 20/1GA02 = 68 mm: 6/1 - 10/1 - 12/1 - 20/1 - 24/1 - 30/1 - 36/1GA05 = 113 mm: 12/1 - 20/1 - 24/1 - 30/1 - 36/1 - 60/1 -100/1(other ratios on request).

GA11 GA12Gravity controlled analogue indicators, for use on control spindles with

positions ranging from horizontal up to 60 inclined. Case and bezel inspecial technopolymer with transparent polyamide window ultrasonicallywelded and completely sealed to protection class IP67 according to IEC 529.Matte silver anodised aluminium dial with black graduations.

Counterweight fitted with a sensitive ballrace bearing for improvedreading accuracy.

Standard ratios with clockwise and anti-clockwise rotation:GA11 = 50 mm: 10/1 - 12/1 - 20/1 - 24/1 - 30/1 - 40/1GA12 = 68 mm: 6/1 - 10/1 - 12/1 - 20/1 - 24/1 - 30/1 - 36/1(other ratios on request).

MBT.50/GA11 MBT.70/GA12Gravity controlled analogue indicators integral with hand knobs, for use oncontrol spindles, with positions ranging from horizontal up to 60 inclined.Case and bezel in special black technopolymer with transparent, polyamidewindow ultrasonically welded and completely sealed to protection class IP67according to IEC 529 .The outside rim has been designed with a truncated diamond knurl thatprovides a comfortable grip and aids adjustment of the knob duringrotation.

Matte silver anodised aluminium dial with black graduations.Counterweight fitted with a sensitive ballrace bearing for improvedreading accuracy.Black oxide steel insert with standard H7 tolerance reamed hole.Standard ratios with clockwise and anti-clockwise rotation:MBT.50/GA11 = 51 mm: 10/1 - 12/1 - 20/1 - 24/1 - 30/1 - 40/1MBT.70/GA12 = 70 mm: 6/1 - 10/1 - 12/1 - 20/1 - 24/1 - 30/1 -36/1(other ratios on request).

GW12Gravity controlled digital-analogue indicators, for use on control spindleswith positions ranging from horizontal up to 60 inclined.Case and bezel in special black technopolymer with transparent polyamide

window ultrasonically welded and completely sealed to protection class IP67according to IEC 529. Matte silver anodised aluminium dial with blackgraduations.Five figures digital counter with 1 decimal place on red wheel.

Digit height 6 mm.Counterweight fitted with a sensitive ballrace bearing for improvedreading accuracy.Standard readings after one revolution of the indicator with clockwise

and anti-clockwise rotation:GW12 = 68 mm: 0000.2 - 0000.5 - 0001.0 - 0002.0 - 0002.5 -0004.0 - 0005.0(other readings on request).

DD52RDirect drive digital position indicators to be mounted on passing throughcontrol spindles in any position. Special technopolymer case ultrasonicallywelded to its support. Standard colours grey and orange. Four or fivefigures digital counter with 1 or 2 decimal places on red wheel. Themagnifying window (lens effect) improves thereadability. Digit height 6 mm. Black oxide steel or stainless steel insert withstandard H7 tolerance reamed hole. Rotational speed: the indicator isdesigned also for use in motor driven applications.

Standard readings after one revolution of the indicatorwith clockwise and anti-clockwise rotation:DD51 H = 47 mm: 00.50 - 01.00 - 001.0 - 001.2/5 - 001.5002.0 - 002.5 - 003.0 - 004.0 - 005.0 - 006.0 - 008.0 - 010.0DD52 H = 66 mm: 000.50 - 001.00 - 0001.0 - 0002.0 - 0002.5 -0003.0 - 0004.00005.0 - 0006.0 - 0010.0(other readings on request).

PA01 PA02 PA05Positive drive controlled analogue indicators, for use on control spindles inany position.Zinc-plated mild steel case and polished AISI 303 stainless steel bezel.

Clear glass window, matte silver anodized aluminium dial with blackgraduations.

Standard ratios with clockwise and anti-clockwise rotation:PA01 = 50 mm: 12/1-20/1,PA02 = 68 mm: 6/1 - 10/1 - 12/1 - 20/1 - 24/1 - 30/1 - 36/1PA05 = 113 mm: 10/1 - 12/1 - 30/1 - 36/1 - 60/1 - 100/1

(other ratios on request).

PA11 PA12Positive drive controlled analogue indicators, for use on control spindles inany Position.Case and bezel in special black technopolymer with transparent polyamidewindow ultrasonically welded and completely sealed to protection class IP65according to IEC 529.Matte silver anodised aluminium dial with black graduations.

Standard ratios with clockwise and anti-clockwise rotation:PA11 = 50 mm: 10/1 - 12/1 - 20/1 - 30/1PA12 = 68 mm: 10/1 - 12/1 - 20/1 - 30/1(other ratios on request).

MBT.Diamond cut knurled knobs for use with indicators having gravity (G type) orpositive drive (P type) movements.Material: special black technopolymer with outside rim having a truncateddiamond knurl that provides a comfortable grip and aids adjustment of theknob during rotation.Black oxide steel insert with standard H7 tolerance reamed hole and sockethead grub screw with cup end.

Aluminium black gloss epoxy finish hand knob model VAK. alsoavailable.Technopolymer knurled grip hand knob model IZN. also available.Diameters: 60 - 80 mm

VHT. VHT. INOXLobe hand knobs for use with indicators having gravity (G type) or positivedrive (P type) movements.Material: special black technopolymer.The special type of design of the rim (lobes, blended radius and wellproportioned rim height) allows the operator to have a firm grip and apply ahigh torque.

Black oxide steel or AISI 303 stainless steel insertwith standard H7 tolerance reamed hole.

Aluminium black gloss epoxy finish hand knob model VAL.also available.Diameters: 85 - 110 mm

VDC. VDC+ISolid handwheels for use with indicators having gravity (G type)or positive drive (P type) movements.Material: black reinforced Duroplast, rim with rear finger grips(diameters from 125 to 200 mm).Duroplast revolving handle for rapid movements (type VDC+I). Black oxidesteel hub, not drilled (G type), with standard H7 tolerance blind hole (P type).

Diameters:type G and type P: = 80 - 100 mmtype G: = 125 - 140 - 160 - 180 - 200 mm

Aluminium black matte epoxy finish handwheel model VAD. also available.type G with screw mounted indicator housing: = 225 - 250 - 300 - 350 mm

VRTP. VRTP+ITwo-spoke handwheels for use with gravity indicators.Material: special black technopolymer with indicator housing installed.

Technopolymer revolving handle for rapid movements(type VRTP+I).

Black oxide steel boss with standard H7 tolerance reamed hole.Black Duroplast three-spoke handwheel model VR., VR+I also

available.Diameters: 160 - 200 - 250 mm

Please contact T.E.A. for faxed data sheets

Rotary Indicators


3/10


4/10


5/10


6/10


7/10


8/10


9/10


10/10

Your partner in quality engineering products since 1986

Thank you for viewing product information on TEAs range of engineering components.

Now please contact us at the nearest office to you for any further information, prices and availability:

AUSTRALIA & New Zealand USA, South America& CanadaT E A Transmissions Pty Ltd T E A Machine Components Inc

Tahiti Road 2281-F Dabney Road

Tiaro Qld 4650 Richmond Virginia 23230

Australia USA

Ph: 61-(0)7 4129 2533 Ph: 1-804-342-0004

Fax: 61-(0)7 4129 2437 Fax: 1-804-342-0006

Email: [email protected] Email: [email protected]

www.tea.net.au www.teausa.net

You are assured of prompt and efficient service at all time

tea elesa gravity indicators

Documents