tdw products and services catalog - songameng · t.d. williamson, inc. p.o. box 3409 tulsa,...
TRANSCRIPT
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Toll Free
1-888-TDWmSon (839-6766)
T. D. Williamson, Inc.
®SHORTSTOPP® 275/500Plugging System Sizes: 1-1/2” through 12”
SHORTSTOPP®
Plugging/Completion MachinePlugging: 1-1/2” through 4”Completion: 1-1/2” through 12”SHORTSTOPP®
Jackscrew ActuatorPlugging: 4” through 12”
Patented in the United States and in foreign countries.ISO 9001 Certified
The lightweight (37 lbs.) SHORTSTOPP®Plugging/Completion Machine is versatile and easyto operate. When used as a plugging machine, itwill plug 1-1/2” at 275 psi and 2” through 4” linesat 500 psi, and can be used on SHORTSTOPP®300 D Fittings (ASME Class 300). As a completionmachine, it has a full range capability of setting 1-1/2” through 12” completion plugs, and willadapt to existing housings in the field.
The SHORTSTOPP® Jackscrew Actuator has thecapability of plugging 4” through 12” lines up to500 psi. This provides an economical way to pluglines that operate in excess of 275 psi. It alsoadapts to existing housings in the field, and willplug through SHORTSTOPP® 300 D Fittings(ASME Class 300).
Both models provide an efficient and economicalmeans of stopping off mains for repairs,relocations or additions.
Description
Maximum working pressure is 500 psi (34.5 bar) @ 100°F (38°C). Maximum workingtemperature is 180°F (82°C) @ 440 psi (30.3 bar). Pressure ratings are limited tofittings and adapters used.
Specifications
Bulletin No: 2020.002.01Date: February 2000Cross Indexing No: n/aSupersedes: 2020.002.00 (2/99)
Actuator Overall Rate of Size Travel Length Weight Travel/Revolution
Inches DN Inches mm Inches mm Lbs. Kg. Inches mm Part Number1-1/2 to 12 40 to 100 28 711.2 44-1/2 1130.3 39 18 1/8 3.175 07-1034-0000
For 1-1/2” through 4” sizes, the actuator functions as a plugging machine. This same actuator also functions as a completion machine for sizes 1-1/2” through 12”.
T. D. Williamson, Inc.®
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Dimensions and Part Numbers
SHORTSTOPP®
275/500 Plugging System
Manual SHORTSTOPP® Plugging/Completion Machine
Sealing Cups Used With 1-1/2” through 4” Plugging MachinePipe Dimensions
Size Maximum ID Minimum IDInches DN Part Number Max. Working in psi Inches mm Inches mm1-1/2 40 08-0114-0015 275 1-5/8 41 1-9/16 40
2 50 08-0947-0002 275 2-1/8 54 2-1/16 522 50 08-3425-0002 500 2-1/8 54 2-1/16 523 80 08-0947-0003 275 3-3/16 81 3-1/16 783 80 08-2253-0005 500 3-3/16 81 3-1/16 784 100 08-0947-0004 275 4-1/4 108 4-1/64 1024 100 08-0036-0005 500 Specify pipe ID when ordering.
HousingsSize Weight
Inches DN Part Number Max. Working Pressure in psi Lbs. Kg.1-1/2 40 08-1746-0000 500 7 3.2
2 50 08-1746-0000 500 7 3.23 80 08-1747-0000 500 10 4.54 100 08-1748-0000 275* 28 12.74 100 08-2148-0000 500** 36 16.3
* ASME Class 150** ASME Class 300
Plugging HeadsSize Weight
Inches DN Part Number Max. Working Pressure in psi Lbs. Kg.1-1/2 40 08-1741-0000 275 1 .5
2 50 08-2252-0000 500 2 13 80 08-2253-0000 500 4 1.84 100 08-1744-0000 500 9 4
Typical 1-1/2”-3” Housing
Cup
Typical 1-1/2”-3” Plugging Head
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.®
Dimensions and Part Numbers
SHORTSTOPP®
275/500 Plugging System
Actuator Overall Rate of Size Travel Length Weight Travel/Revolution
Inches DN Inches mm Inches mm Lbs. Kg. Inches mm Part Number4 to 12 100 to 300 48 1219 64-1/8 1629 140 64 1/8 3 08-0940-0000
Manual SHORTSTOPP® Jackscrew Actuator
Plugging Heads
Sealing Cups Used With 4” through 12” Plugging Machine
Plugging Housings*
Size Class 150 Weight Class 300 WeightInches DN Part Number Max. Working Pressure in psi Lbs. Kg. Part Number Max. Working Pressure in psi Lbs. Kg.
4 100 08-0941-0000 275 48 22 08-2143-0000 500 51 236 150 08-0942-0000 275 75 34 08-2144-0000 500 81 378 200 08-0943-0000 275 96 43 08-2145-0000 500 141 64
10 250 08-0944-0000 275 156 71 08-2146-0000 500 207 9412 300 08-0945-0000 275 221 100 08-2147-0000 500 297 135
*4” through 12” plugging machine housings also can function as completion housings to set 4” through 12” completion plugs with use of an 06-7264-0000 adapter plate.
Pipe DimensionsSize Maximum ID Minimum ID
Inches DN Part Number Max. Working in psi Inches mm Inches mm4 100 08-0947-0004 275 4-1/4 108 4-1/64 1024 100 08-0036-0005 500 Specify pipe ID when ordering.
6 150 08-0947-0006 275 6-1/8 156 6-1/16 1546 150 08-0948-0006 275 6-5/16 160 6-3/16 1576 150 08-0040-0005 500 Specify pipe ID when ordering.
8 200 08-0947-0008 275 8 203.2 7-31/32 202.78 200 08-0948-0008 275 8-11/32 212 8-1/16 2058 200 08-0246-0005 500 Specify pipe ID when ordering.
10 250 08-0947-0010 275 10-1/8 257 10-1/64 25410 250 08-0948-0010 275 10-3/8 264 10-3/16 25910 250 08-0247-0005 500 Specify pipe ID when ordering.
12 300 08-0947-0012 275 12-11/32 314 11-15/16 30312 300 08-0248-0005 500 Specify pipe ID when ordering.
Size WeightInches DN Part Number Max. Working Pressure in psi Lbs. Kg.
4 100 08-1630-0000 500 7 36 150 08-1908-0000 500 24 118 200 08-1909-0000 500 44 2010 250 08-1910-0000 500 88 4012 300 08-1911-0000 500 150 68
Cup
Plugging and/or Completion Housing
Typical 6” Plugging Head
T. D. Williamson, Inc.®
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Dimensions and Part Numbers
SHORTSTOPP®
275/500 Plugging System
Side Outlet Pluggers — Maximum Working Pressure is 275 psi
1-1/2” through 4” using Plugging/Completion MachineSize Part Number Weight Spare Seals
Inches DN Lbs. Kg. Part Number1-1/2 40 08-1871-0000 1.5 .7 08-1871-0002
2 50 08-1872-0000 2.2 1 08-0976-00023 80 08-1873-0000 5 2 08-0977-00024 100 08-1874-0000 12 5 08-0928-0002
4” through 12” using Jackscrew Actuator4 100 08-0928-0000 12 5 08-0928-00026 150 08-0929-0000 24 11 08-0929-00028 200 08-0930-0000 38 17 08-0930-0002
10 300 08-0931-0000 67 30 08-0931-000212 350 08-0932-0000 95 43 08-0932-0002
The side outlet plugger can be installed on the end of either SHORTSTOPP® Plugging Machine and is used on TDW 3-WAY Tees™ and Spherical 3-WAY Tees™ to plug the tapped hole in the main line. This stops flow into the sideoutlet, permitting maintenance work on the branch connection.
T-203 Tapping Machine Adapters*
Size Class 150 Weight Class 300 WeightInches DN Part Number Max. Working in psi Lbs. Kg. Part Number Max. Working in psi Lbs. Kg.
4 100 06-1542-0000 275 29 13 06-7370-0000 720 38 176 150 06-1543-0000 275 43 20 06-7371-0000 720 65 308 200 06-1544-0000 275 67 30 06-7372-0000 720 95 43
10 250 06-1545-0000 275 95 43 06-7373-0000 720 140 6412 300 06-1546-0000 275 160 73 06-7374-0000 720 205 93
*T-203 Tapping Machine adapters also function as completion housings to set 4” through 12” completion plugs with use of an 06-7265-0000 adapter plate.
1-1/2” through 12” Completion Plug Holders
Housings and Adapters
When used with the proper adapter plate,these plugging housings and T-203 adapters canbe used with the plugging/completion machineto set 4” through 12” plugs.
SHORTSTOPP® Plugging/Completion Machine — Part Number 07-1034-0000
For 1-1/2” through 4” sizes, the actuator functions as a plugging machine. This same actuator also functionsas a completion machine for sizes 1-1/2” through 12”. In sizes 1-1/2” through 4”, the plugging housings alsoserve as completion machine housings, without need for adapter plates (see page 2).
Size WeightInches DN Part Number Lbs. Kg.
1-1/2 - 3 40 - 80 07-0974-0000 1 .54 - 8 100 - 200 07-0334-0000 2 1
10 - 12 250 - 300 07-0335-0000 2-1/2 1.5
NOTE: Completion plug setting pressure limited to pressure rating of completion machine.
1-1/2” - 3” Completion Plug Holder
Typical 4” - 12”Completion Plug Holder
Adapter Plate Wt. 11 lbs/5 Kg. Part Number 06-7265-0000
T-203 Tapping and /or Completion Housing
Adapter plate only needed when used with the plugging/completion machine (07-1034-0000) on 4” through 12” T-203Tapping Machine Adapters.
Side Outlet Plugging Option
Series 300SANDWICH® Valve
Full-encirclement3-WAY™ Tee
Typical SHORTSTOPP® PluggingMachine Control Bar
Side Outlet Plugger
Main Line
Branch
Data Sheet No. SS275-1-1/2Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
1-1/
2
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 1-1/2” Gas Main to 275 psi
Data Sheet No.
SS275-1-1/2
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
Optional**
1-1/2” Pipe
1-1/2” 3-WAY™ Tee
1-1/2” 3-WAY™ Tee (includescompletion plug, O-ring, and pipe cap)Stock No. 26-0216-0000
**Refer to back for fitting options.***Refer to back for completion.
1-1/2” Welding Fitting (includescompletion plug, O-ring, and pipe cap)Stock No. 26-0211-0000
1/2” through 4” taps T-101Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001
Bleeder Valve and Nipple includedwith T-101 Drilling Machine
2” Valve Adapter00-0706-0015
Holder Pilot05-0275-0000
1-1/2” Hole Saw (nominal)00-1151-0009
Bleeder Valve and Nippleincluded with machine
2” Housing 08-1746-0000
1-1/2” Plugging Head08-1741-0000
Sealing Cup08-0114-0015
SHORTSTOPP® Plugging / Completion Machine Stock No. 07-1034-0000Reference Bulletin 2020.002
Pipe Cap
Completion Plug with O-ring***Completion Plugwith O-ring***
Pipe Cap
1-1/2” Welding Fitting
Handle2” SHORTCUTT®
500 Valve 09-0758-0000
500 PSI
Data
She
et N
o.SS
275-
1-1/
2
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine1-1/2” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-1-1/2
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Note: Consult your TDW representative for additional fitting options.
Completion
Completion Plug Holder07-0974-0000
2” Housing08-1746-0000
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002
Data Sheet No. SS275-2Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
2
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 2” Gas Main to 275 psi
Data Sheet No.
SS275-2
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
Optional**
2” Pipe
2” 3-WAY™ Tee
2” 3-WAY™ Tee (includes completion plug, O-ring, and pipe cap)Stock No. 26-0217-0000
**Refer to back for fitting options.***Refer to back for completion.
2” Welding Fitting (includes completion plug, O-ring, and pipe cap) Stock No. 26-0212-0000
1/2” through 4” taps T-101 Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001
Bleeder Valve and Nipple includedwith T-101 Drilling Machine
2” Valve Adapter00-0706-0015
Holder Pilot05-0204-0000
2” Hole Saw (nominal)05-0179-0002
Bleeder Valve and Nippleincluded with machine
2” Housing 08-1746-0000
2” Plugging Head08-2252-0000
Sealing Cup08-0947-0002
SHORTSTOPP® Plugging / Completion Machine Stock No. 07-1034-0000Reference Bulletin 2020.002
Completion Plugwith O-ring***
2” Pipe Cap2” Pipe Cap
2” Welding Fitting
Completion Plug with O-ring***
Handle2” SHORTCUTT®
500 Valve 09-0758-0000
500 PSI
Data
She
et N
o.SS
275-
2
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine2” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-2
Completion
Completion Plug Holder07-0974-0000
2” Housing08-1746-0000
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2110.002
Note: Consult your TDW representative for additional fitting options.
Data Sheet No. SS275-3Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
3
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 3” Gas Main to 275 psi
Data Sheet No.
SS275-3
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
Optional**
3” Pipe
3” 3-WAY™ Tee
3” 3-WAY™ Tee (includes completionplug, O-ring, and pipe cap)Stock No. 26-0218-0000
**Refer to back for fitting options.***Refer to back for completion.
3” Welding Fitting (includes completion plug, O-ring, and pipe cap)Stock No. 26-0213-0000
1/2” through 4” taps T-101 Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001
Bleeder Valve and Nipple includedwith T-101 Drilling Machine
3” Valve Adapter06-1303-0001
Holder Pilot05-0204-0000
3” Hole Saw(nominal)05-0179-0003
Bleeder Valve and Nippleincluded with machine
3” Housing 08-1747-0000
3” Plugging Head08-2253-0000
SHORTSTOPP® Plugging / Completion Machine Stock No. 07-1034-0000Reference Bulletin 2020.002
Completion Plugwith O-ring***
Completion Plug with O-ring***
3” Pipe Cap3” Pipe Cap
3” Welding Fitting
Sealing Cup08-0947-0003
Handle3” SHORTCUTT®
500 Valve 09-0759-0000
500 PSI
Data
She
et N
o.SS
275-
3
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine3” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-3
Completion
Completion Plug Holder07-0974-0000
3” Housing08-1747-0000
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Note: Consult your TDW representative for additional fitting options.
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
1/2” through 4” taps T-101Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001
Bleeder Valve and Nipple includedwith T-101 Drilling Machine
Holder Pilot05-0205-0000
4” Hole Saw05-0179-0004
Pilot Drill05-0247-0003
4” SHORTSTOPP®
Cutter (nominal)05-0255-0004
Key Cutter Holder05-0227-0000
T-203 ValveAdapter06-1542-0000
Bleeder Valve and Nippleincluded with machine
Optional*
Optional
4” Welding Fitting
4” Pipe
Cover Flange
Completion Plug**
Cover Flange
Completion Plug**
4” 3-WAY™ Tee
3-WAY™ Tee (includes cover flange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7218-0000
*Refer to back for fitting options.**Refer to back for completion.
Fitting (includes cover flange with bolts,gasket and plastic caplugs, completion plugand O-ring) Stock No. 06-7213-0000
4” Valve Adapter06-1302-0015
4” through 12” taps T-203 TappingMachine with air motor driveassembly and carrying case.
Stock No. 05-2173-0000Reference Bulletin 2100.007
4” Housing 08-1748-0000
4” Plugging Head08-1744-0000
Sealing Cup08-0947-0004
Data Sheet No. SS275-4Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
4
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 4” Gas Main to 275 psiUsing Completion Machine
Data Sheet No.
SS275-4
SHORTSTOPP® Plugging/Completion Machine Stock No. 07-1034-0000Reference Bulletin 2020.002
Valve-to-Fitting Adapter06-5724-0001
4” SHORTSTOPP® Valve09-0696-0000285 psiAluminum Body
4” SHORTCUTT® Valve09-0040-0000275 psi
Data
She
et N
o.SS
275-
4
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine4” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-4
Completion
Completion Plug Holder07-0334-0000
4” Housing08-1748-0000
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002.00
Note: Consult your TDW representative for additional fitting options.
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2110.001
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
1/2” through 4” taps T-101Drilling Machine Stock No. 05-1028-0000-00Reference Bulletin 2000.001
Bleeder Valve and Nipple includedwith T-101 Drilling Machine
Holder Pilot05-0205-0000
4” Hole Saw05-0179-0004
Pilot Drill05-0247-0003
4” SHORTSTOPP®
Cutter (nominal)05-0255-0004
Cutter Holder Key 05-0227-0000
T-203 ValveAdapter06-1542-0000
Bleeder Valve and Nippleincluded with machine
Optional*
Optional
4” Welding Fitting
4” Pipe
Cover Flange
Completion Plug**
Cover Flange
Completion Plug**
4” 3-WAY™ Tee
3-WAY™ Tee (includes cover flange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7218-0000
*Refer to back for fitting options.**Refer to back for completion.
Fitting (includes cover flange with bolts,gasket and plastic caplugs, completion plugand O-ring) Stock No. 06-7213-0000
4” Valve Adapter06-1302-0015
4” through 12” taps T-203 TappingMachine with air motor driveassembly and carrying case.
Stock No. 05-2173-0000Reference Bulletin 1000.007
4” Housing 08-0941-0000
4” Plugging Head08-1630-0000
Sealing Cup08-0947-0004
Data Sheet No. SS275-4ADate: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
4A
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 4” Gas Main to 275 psi
Data Sheet No.
SS275-4A
SHORTSTOPP® Jackscrew ActuatorStock No. 08-0940-0000Reference Bulletin 2020.002
Valve-to-Fitting Adapter06-5724-0001
4” SHORTSTOPP® Valve09-0696-0000285 psiAluminum Body
4” SHORTCUTT® Valve09-0040-0000275 psi
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2100.001
Completion
Data
She
et N
o.SS
275-
4A
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine4” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-4A
Note: Consult your TDW representative for additional fitting options.
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002.00
Adapter06-7264-0000
Adapter06-7265-0000
Completion Plug Holder07-0334-0000
SHORTSTOPP®
Plugging Housing08-0941-0000
T-203 Tapping andCompletion Housing06-1542-0000
Optional
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Plugging
Bleeder Valve and Nippleincluded with machine
Optional*
6” Welding Fitting
6” Pipe
Cover Flange
Completion Plug**
Cover Flange
Completion Plug**
6” 3-WAY™ Tee
6” 3-WAY™ Tee (includes coverflange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7219-0000
*Refer to back for fitting options.**Refer to back for completion.
6” fitting (includes cover flanges with bolts,gaskets and plastic caplugs, completion plugand O-ring) Stock No. 06-7214-0000
6” Housing 08-0942-0000
6” Plugging Head08-1908-0000
6” Sealing Cup08-0948-0006 (6-5/16 to 6-3/16 ID)08-0947-0006 (6-1/8 to 6-1/16 ID)
Data Sheet No. SS275-6Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
6
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 6” Gas Main to 275 psi
Data Sheet No.
SS275-6
SHORTSTOPP® Jackscrew ActuatorStock No. 08-0940-0000Reference Bulletin 2020.002
Valve-to-Fitting Adapter06-5724-0002
6” SHORTSTOPP® Valve09-0697-0000285 psiAluminum Body
6” SHORTCUTT® Valve09-0041-0000275 psi
Tapping
Note: Either the T-101 XL or T-203 Tapping Machineis recommended for 6” taps.
6” Hole Saw05-2348-0006
Holder Pilot05-2053-0000-00
6” Valve Adapter06-8872-0001-00
Bleeder valve andnipple included with T-101 XL DrillingMachine.
T-101 XL Drilling MachineStock No. 05-1029-0000-00Reference Bulletin 2000.001
T-203 TappingMachine with airmotor driveassembly andcarrying case.Stock No. 05-2173-0000Reference Bulletin1000.007
T-203 ValveAdapter06-1543-0000
Cutter Holder05-0326-0000
6” SHORTSTOPP®
Cutter (nominal)05-0330-0006
Pilot Drill05-0293-0002
Optional
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2100.001
Completion
Data
She
et N
o.SS
275-
6
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine6” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-6
Note: Consult your TDW representative for additional fitting options.
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002.00
Adapter06-7264-0000
Adapter06-7265-0000
Completion Plug Holder07-0334-0000
SHORTSTOPP®
Plugging Housing08-0942-0000
T-203 Tapping andCompletion Housing06-1543-0000
Optional
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
Pilot Drill05-0293-0003
8” SHORTSTOPP®
Cutter (nominal)05-0330-0008
Cutter Holder05-0326-0000
8” Valve Adapter06-1544-0000
Bleeder Valve and Nippleincluded with machine
Optional*
8” Welding Fitting
8” Pipe
Cover Flange
Completion Plug**
Cover Flange
Completion Plug**
8” 3-WAY™ Tee
8” 3-WAY™ Tee (includes coverflange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7220-0000
*Refer to back for fitting options.**Refer to back for completion.
8” fitting (includes cover flange with bolts,gasket and plastic caplugs, completion plugand O-ring) Stock No. 06-7215-0000
T-203 Tapping Machine with air motordrive assembly and carrying case.Stock No. 05-2173-0000Reference Bulletin 1000.007
8” Housing 08-0943-0000
8” Plugging Head08-1909-0000
8” Sealing Cup08-0948-0008 (8-1/32” to 8-1/16” ID)08-0947-0008 (8” to 7-31/32” ID)
Data Sheet No. SS275-8Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
8
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 8” Gas Main to 275 psi
Data Sheet No.
SS275-8
SHORTSTOPP® Jackscrew ActuatorStock No. 08-0940-0000Reference Bulletin 2020.002
Valve-to-Fitting Adapter06-5724-0003
8” SHORTCUTT® Valve09-0042-0000
275 psi
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2100.001
Completion
Data
She
et N
o.SS
275-
8
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine8” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-8
Note: Consult your TDW representative for additional fitting options.
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002
Adapter06-7264-0000
Adapter06-7265-0000
Completion Plug Holder07-0334-0000
SHORTSTOPP®
Plugging Housing08-0943-0000
T-203 Tapping andCompletion Housing06-1544-0000
Optional
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
Pilot Drill05-0293-0004
10” SHORTSTOPP®
Cutter (nominal)05-0446-0010
Cutter Holder05-0326-0000
12” Valve Adapter06-1546-0000
Bleeder Valve and Nippleincluded with machine
Optional*
10” Welding Fitting
10” Pipe
Cover Flange
Completion Plug**
Cover Flange
Completion Plug**
10” 3-WAY™ Tee
10” 3-WAY™ Tee (includes coverflange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7221-0000
*Refer to back for fitting options.**Refer to back for completion.
10” fitting (includes cover flange with bolts,gaskets and plastic caplugs, completion plugand O-ring) Stock No. 06-7216-0000
T-203 Tapping Machine with air motordrive assembly and carrying case.Stock No. 05-2173-0000Reference Bulletin 1000.007
12” Housing 08-0945-0000
10” Plugging Head08-1910-0000
10” Sealing Cup08-0948-0010 (10-3/8” to 10-3/16” ID)08-0947-0010 (10-1/8” to 10-1/64” ID)
Data Sheet No. SS275-10Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
10
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 10” Gas Main to 275 psi
Data Sheet No.
SS275-10
SHORTSTOPP® Jackscrew ActuatorStock No. 08-0940-0000Reference Bulletin 2020.002
Valve-to-Fitting Adapter06-5724-0012
12” SHORTCUTT® Valve09-0044-0000
285 psi
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2100.001
Completion
Data
She
et N
o.SS
275-
10
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine10” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-10
Note: Consult your TDW representative for additional fitting options.
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002
Note: 10” SHORTCUTT® Valvesnot available. Plugging andcompletion are done through 12”SHORTCUTT® Valve.
Adapter06-7264-0000
Adapter06-7265-0000
Completion Plug Holder07-0335-0000
SHORTSTOPP®
Plugging Housing08-0945-0000
T-203 Tapping andCompletion Housing06-1546-0000
Optional
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
Tapping Plugging
Pilot Drill05-0293-0005
12” SHORTSTOPP®
Cutter (nominal)05-0330-0012
Cutter Holder05-0326-0000
12” Valve Adapter06-1546-0000
Bleeder Valve and Nippleincluded with machine
Optional*
12” Welding Fitting
12” Pipe
Cover Flange
Completion Plug**
Cover Flange
Completion Plug**
12” 3-WAY™ Tee
12” 3-WAY™ Tee (includes coverflange with bolts, gasket and plastic caplugs, completion plugand O-ring)Stock No. 06-7222-0000
*Refer to back for fitting options.**Refer to back for completion.
12” fitting (includes cover flange with bolts,gaskets and plastic caplugs, completion plugand O-ring) Stock No. 06-7217-0000
T-203 Tapping Machine with air motordrive assembly and carrying case.Stock No. 05-2173-0000Reference Bulletin 1000.007
12” Housing 08-0945-0000
12” Plugging Head08-1911-0000
12” Sealing Cup08-0947-0012 (12-11/32 to 11-15/16 ID)
Data Sheet No. SS275-12Date: January 2003Supersedes: March 1999
T. D. Williamson, Inc.
®
Data
She
et N
o.SS
275-
12
Tapping and SHORTSTOPP®
Plugging Machine Equipment Needed to Plug a 12” Gas Main to 275 psi
Data Sheet No.
SS275-12
SHORTSTOPP® Jackscrew ActuatorStock No. 08-0940-0000Reference Bulletin 2020.002
Valve-to-Fitting Adapter06-5724-0011
12” SHORTCUTT® Valve09-0044-0000
275 psi
Welding Fitting See Bulletin 2100.003
3-WAY™ TeeSee Bulletin 2100.002
Spherical 3-WAY™ Tee See Bulletin 2100.007
Mechanical SHORTSLEEVE™ Fitting See Bulletin 2100.001
Completion
Data
She
et N
o.SS
275-
12
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5000 Fax: 918-447-5154 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. / © Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
®
Tapping and SHORTSTOPP®
Plugging Machine12” Gas Main to 275 psi
Fittings
Data Sheet No. SS275-12
Note: Consult your TDW representative for additional fitting options.
SHORTSTOPP®
Plugging/Completion MachineStock No. 07-1034-0000Reference Bulletin 2020.002
Adapter06-7264-0000
Adapter06-7265-0000
Completion Plug Holder07-0335-0000
SHORTSTOPP®
Plugging Housing08-0945-0000
T-203 Tapping andCompletion Housing06-1546-0000
Optional