td public auction g - asset salesdoosan mv 3016l cnc vertical machining center with 37” x 17”...
TRANSCRIPT
Turn
in
g Your Assets into Dollars
Public AuctionPLANT
CLOSED
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
163 Associates LaneIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
PLANT CLOSED
NEODESHA QUALITY MACHINELATE MODEL & MULTI-AXIS CNC AEROSPACE MACHINING FACILITY
220 KLAYDER DRIVE - NEODESHA, KS 66757 THURSDAY, JULY 26TH @ 10:00 A.M. CDT
Inspection: Wednesday, July 25th, From 8:00 A.M. - 4:00 P.M. CDT
>ZEISS CONTURA G2 COORDINATE
MEASURING MACHINE
DOOSAN DHC-400 CNC HORIZONTAL MACHINING CENTER
2006
DOOSAN DNM 500HS HIGH SPEED VERTICAL MACHINING CENTER
<QUASER MF630U/15C 5-AXIS VERTICAL MACHINING CENTER
2014
2013
2014
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 25TH FROM 8:00 A.M. - 4:00 P.M. CDT
2
(4) 4/5 AXIS CNC VERTICAL MACHINING CENTERSQUASER MF630U/15C 5-Axis CNC Vertical Machining Center with 19” Diameter Rotary Trunnion Work Table, #40 Taper Spindle Speeds to 15,000 RPM, 31.5” X-Axis Travel, 27.55” Y-Axis, 24” Z-Axis, 60 Position ATC, FANUC 31i CNC Control, sn:310D140027, mfg.2014
QUASER MF400C/10C 4+1-Axis CNC Vertical Machining Center with 12” Diameter Rotary Trunnion Work Table, #40 Taper Spindle Speeds to Approx. 10,000 RPM, 16.14” X-Axis Travel, 24.1” Y-Axis, 20.7” Z-Axis, 30 Position ATC & FANUC Oi-MD CNC Control, sn:306B110031, mfg.2011
DOOSAN DNM 200/5AX 5-Axis CNC Vertical Machining Center with 8” Diameter Rotary Trunnion Work Table, #40 Taper Spindles Speeds to 12,000 RPM, 15.75” X-Axis Travel, 17.13” Y-Axis, 19.69” Z-Axis, 30 Position ATC, Wired for Thru-Spindle Coolant, Low Hours, Probing, FANUC i CNC Controls, sn:MV0083-000035, mfg.2015
DOOSAN DNM 400 4-Axis CNC Vertical Machining Center with 6” & 8” TSUDAKOMA 4th Axis Rotary Tables, #40 Taper Spindle Speeds to 12,000 RPM, 17” x 36” Work Table, 30” X-Axis Travel, 17.8” Y-Axis, 20.1” Z-Axis, 30 Position ATC, FANUC i CNC Control, sn:DNM4000468, mfg.2010
HIGH SPEED VERTICAL MACHINING CENTERDOOSAN DNM 500HS Vertical Machining Center with 21” x 47” Worktable, #40 Taper Spindle Speeds to 15,000 RPM, 40” X-Axis Travel, 21” Y-Axis, 20” Z-Axis, 30 Position ATC, FANUC 32i CNC Control, sn:MV0041-000093, mfg.2014
QUASER MF630U/15C 5-AXIS CNC VERTICAL MACHINING CENTER
DOOSAN DNM 200/5AX 5-AXIS CNC VERTICAL MACHINING CENTER
QUASER MF400C/10C 4+1-AXIS CNC VERTICAL MACHINING CENTER
2014 2011
2015
DOOSAN DNM 400 4-AXIS CNC VERTICAL MACHINING CENTER
2010
DOOSAN DNM 500HS VERTICAL MACHINING CENTER
2014
AUCTION SALE DATE & TIME – THURSDAY, JULY 26TH @ 10:00 A.M. CDT
3
(2) HYUNDAI WIA F400 CNC VERTICAL MACHINING CENTERS
(8) CNC VERTICAL MACHINING CENTERS(2) HYUNDAI WIA F400 CNC Vertical Machining Centers with 39” x 18” Worktables, #40 Taper Spindles Speeds to 8,000 RPM, 31.5” X-Axis Travel, 18.1” Y-Axis, 20.5” Z-Axis, 24 Position ATC, FANUC HYUNDAI WIA CNC Controls, sn:G3683-1440, mfg. Approx. 2015 • sn:G3683-1438, mfg. Approx. 2015
DOOSAN MV 4020L CNC Vertical Machining Center with 48” x 20” Worktable, #40 Taper Spindle Speeds to 8,000 RPM, 40” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, 30 Position ATC, FANUC Oi-MC CNC Control, sn:NM5100321, mfg.2007
DOOSAN MV 3016L CNC Vertical Machining Center with 37” x 17” Worktable, #40 Taper Spindle Speeds to 8,000 RPM, 30” X-Axis Travel, 16” Y-Axis, 20” Z-Axis, 30 Position ATC, FANUC i CNC Control, sn:4101178, mfg.2008
DAEWOO DMV 5025 CNC Vertical Machining Center with 55” x 25.6” Worktable, #40 Taper Spindle Speeds to 12,000 RPM, 51” X-Axis Travel, 25.5” Y-Axis, 24.6” Z-Axis, 30 Position ATC, FANUC 21i-MB CNC Control, sn:AV63-0297, mfg.2005
DAEWOO DMV-400 CNC Vertical Machining Center with Pallet Changer, 25” x 18” Pallets, #40 Taper Spindle Speeds to 10,000 RPM, 22” X-Axis Travel, 15.7” Y-Axis, 22.4” Z-Axis, 30 Position ATC, sn:AV380516
(2) MILLTRONICS CNC Vertical Machining Centers (need repair)
DOOSAN MV 4020L CNC VERTICAL MACHINING CENTER
2007
20152
AVAIL.
DOOSAN MV 3016L CNC VERTICAL MACHINING CENTER
2008
DAEWOO DMV 5025 CNC VERTICAL MACHINING CENTER
2005
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 25TH FROM 8:00 A.M. - 4:00 P.M. CDT
4
CNC HORIZONTAL MACHINING CENTERDOOSAN DHC-400 CNC Horizontal Machining Center with (2) 16” x 16” Pallets, 360˚ Rotation, #40 Taper Spindle Speeds to 10,000 RPM, 23” X-Axis Travel, 22” Y-Axis, 22” Z-Axis, 40 Position ATC, FANUC 21i-MB CNC Control, sn:HC400285, mfg.2006
GANTRY MACHINEMILLTRONIC BR50 CNC Vertical Bridge Mill with 48” x 98” Table, #40 Taper Spindle, 50” X-Axis Travel, 120” Y-Axis, 28” Z-Axis, CNC Controls, sn:3673
CNC TURNINGHWACHEON Hi-ECO 10 CNC Turning Center with 6” Power Chuck, 22” to Tailstock, Gantry Hydrostatic Barfeed, FANUC O-T CNC Control, sn:3445L-56
DAEWOO DMV-400 CNC VERTICAL MACHINING CENTER DOOSAN DHC-400 CNC HORIZONTAL MACHINING CENTER
2006
MILLTRONIC BR50 CNC VERTICAL BRIDGE MILL
HWACHEON Hi-ECO 10 CNC TURNING CENTER
(2) MILLTRONICS CNC VERTICAL MACHINING CENTERS
2AVAIL.
2PALLET
AUCTION SALE DATE & TIME – THURSDAY, JULY 26TH @ 10:00 A.M. CDT
MILLING MACHINES, ENGINE LATHE
JET Variable Speed Vertical Milling Machine with 12” x 48” Power Feed Table, Variable Spindle Speeds to 3800 RPM, sn:0070109
GORTON Vertical Milling Machine with 12” x 72” Worktable
SUPER MACHINE Vertical Milling Machine with 9" x 36” Worktable, sn:0705002
BRIDGEPORT 2-Spindle Milling Machine with 9” x 48” Table, R8 Taper, Tracer Attachment with Hydraulic Unit
MAZAK 21” Swing x 62” Center Distance Engine Lathe with 12” 4-Jaw Chuck, 3-Jaw Chuck, Threading, Spindle Speeds to 1500 RPM, Chip Pan, sn:18573
BRIDGEPORT Romi 22” x 60” CNC Lathe with 10” 3-Jaw Chuck, Tail Stock, EZ Path CNC Control, sn:C02-083555-364
JET VARIABLE SPEED VERTICAL MILLING MACHINE MAZAK 21" SWING X 62" CENTER DISTANCE ENGINE LATHE
SUPER MACHINE VERTICAL MILLING MACHINE
BRIDGEPORT 2-SPINDLE MILLING MACHINE
BRIDGEPORT ROMI 22" X 60" CNC LATHE
5
EDWARDS APPROX. 45 TON IRONWORKER
BEN PEARSON TUBE MASTER
Asset Sales, Inc. Does
Not Pack, Ship, Crate,
Transport or Rig Items.
Buyers May Pick Up
Their Items
at the Auction Location
or Can Arrange for
a Third Party Logistics
Firm to Manage the
Removal Process for
Them.
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 25TH FROM 8:00 A.M. - 4:00 P.M. CDT
6
GUIFIL PE25-60 66 TON X 8' HYDRAULIC PRESS BRAKE
HYDRAULIC PRESS BRAKE, WELDING AREA & ASSORTED PRESSES
GUIFIL PE25-60 66 Ton x 8’ Hydraulic Press Brake with Autogage CNC 1000 Backgauge, sn:013674
BANTAM Model 4-12 12 Ton x 4’ Press Brake with Foot Pedal Control
EDWARDS Approx. 45 Ton Ironworker, Plate Shear, Punch, Angles, Notching, Dual Side, sn:12675598
(2) MILLER Syncrowave 250 Arc Welders, sn:KJ183311 • sn:KE631340
MILLER Syncrowave 250 Portable Arc Welder with Bernard Chiller, sn:KJ022940
MILLER Millermatic 350P Portable Mig Welder, sn:LH020156B
LINCOLN Square Wave Tig 300 Portable Tig Welder with LINCOLN Magnum Radiator, sn:C682140
HYPERTHERM Powermax 380 Plasma Cutter
BEN PEARSON Tube Master Hydraulic Bender with Up To 3” Capacity, Large Assortment of Dies
ARMCO 4 Post Down Acting Hydraulic Press with 40” x 40” Between Post, Approx. 20” Shut Height, Bolling Hydraulic Unit, sn:454
Other Welding Equipment, Tables, Etc.
SAWSMARVEL Series 15A Automatic Horizontal Bandsaw with 15” x 20” Capacity, 15” Rounds, Variable Blade Speeds & Barfeed, sn:E151222
JIH-18CD Cold Saw with Digital Measuring System, 125mm x 125mm to 20mm x 300” Capacity, Mitres to 45 ,̊ Pneumatic Feeds, 18” Blade, sn:970522002, mfg.2008
SCOTCHMAN Mitre Cold Saw
DOALL Metal Master 36” Vertical Bandsaw with Blade Weld Attachment 31” x 31” Adjustable Table
KMT Cut Off Saw with Coolant
BANTAN 12 TON X 4' PRESS BRAKE ARMCO 4-POST DOWN ACTING HYDRAULIC PRESS
MORE UPCOMING AUCTIONS AT WWW.ASSET-SALES.COM
AUCTION SALE DATE & TIME – THURSDAY, JULY 26TH @ 10:00 A.M. CDT
7
AIR COMPRESSORSATLAS COPCO GA18 25 HP Rotary Screw Air Compressor with 100 CFM, sn:WUX585777, mfg.2014
ATLAS COPCO 25 HP Rotary Screw Air Compressor Model GA18PLUS, sn:API299184, mfg.2006
SULLAIR 25 HP Rotary Screw Air Compressor Model 1809E with SULLAIR Digital Controller, sn:201005170065, mfg.2010
SULLAIR 15 HP Rotary Screw Air Compressor Model 1109E/A, sn:200611300162, mfg. Approx. 2006
INSPECTIONZEISS Contura G2 7/10/6 RDS Coordinate Measuring Machine with Scanning, VAST XXT Motorized Probe Head with Tip Change, Remote CNC Pendant Controls, Computer & Software, sn:201406504435, mfg.2014
MITUTOYO Bright-M BHY710 Coordinate Measuring Machine with Renishaw Probe Model MPI, GEOMEASURE 2-13 Software & Computer, sn:0012612003000000720
STANDRIDGE 36” x 72” x 9” Granite Surface Table, Assortment of other Surface Tables
Assortment of Inspection Tooling Including Pin Gages, Micrometers, Calipers, 123 Blocks, Etc..
MARVEL SERIES 15A AUTOMATIC HORIZONTAL BANDSAW
JIH-18CD COLD SAW
2008
SULLAIR ROTARY SCREW AIR COMPRESSORS ATLAS COPCO ROTARY SCREW AIR COMPRESSORS
DOALL VERTICAL BANDSAW
ZEISS CONTURA G2 7/10/6 RDS COORDINATE MEASURING MACHINE
MITUTOYO BRIGHT-M BHY710 COORDINATE MEASURING MACHINE
2014
ATTENDING THE AUCTION IN PERSON?
What you need to bring.....
• Your Driver’s License• Business Card
• Tax Exempt Form if Non Taxable
• Bank Letter of Guarantee if Paying via Company
Check
2014
2010
NICE
MACHINERY INSPECTION DATE & TIME – WEDNESDAY, JULY 25TH FROM 8:00 A.M. - 4:00 P.M. CDT
8
NISSAN 4,400LB CAPACITY PROPANE FORKLIFT
CLARK 6,000LB CAPACITY PROPANE FORKLIFT
FORD F150 4X4 PICK-UP TRUCK
FORKLIFTS / PICK-UP TRUCKS
CLARK 6000lb Capacity Propane Forklift Model C500-600 with 4 Solid Tires, 2-Stage Mast, sn:685-3373035376
NISSAN 4400lb Capacity Propane Forklift Model KCPH02A25PV with 3-Stage Mast, 187” Max. Reach, Solid Tires, 3'6" Forks, sn:KCPH02P900499
CLARK 4000lb Capacity Forklift with Solid Tires, 3’ Forks, sn:C40B-1665-814-LPG1266 (needs repair)
FORD F150 4X4 Crew Cab Pick-Up Truck with Short Bed, Running Boards, Automatic Transmission, VIN#1FTFW1EF5CFA22329, mfg.2011
CANNONBALL Engineering 8’ Truck Bed, sn:23888
<QUICKSILVER 24" PASS THROUGH BELT SANDER
Want to Sell Your Shop or
Know Someone Who
Does? Call Us Toll Free at
(888) 800-4442! We Pay
Great Finder’s Fees!
AUCTION SALE DATE & TIME – THURSDAY, JULY 26TH @ 10:00 A.M. CDT
9
MISCELLANEOUSVIKING CP-100 30 Ton Capacity H-Frame Shop Press with 24” Between Up Rights, sn:40849
K&T CVA Single Spindle Automatic Screw Machine, sn:85374
QUICKSILVER 29” Pass Through Belt Sander with Single Head, 15 HP, DONALDSON Dust Collector
TOMBSTONES: (2) 19-3/4” x 19-3/4” x 26” • (2) 19-1/2” x 19-1/2” x 26” • Angle Tombstones (2) 19-3/4” x 19-3/4” x 26”
VIDEOJET INKJET Parts Marking Machine Model Excel 2000, sn:043241040WD
BLACK DIAMOND Tool Grinder
LNS ECO Load CNC Hydraulic Bar Feeder with SIEMENS Control
GRIEVES Type Electric Furnace with Honeywell Control
BURR BENCH & Other Vibratory Finishers, Pedestal Drill Presses, Cantilever Racks & Tilt Hoppers, Bar Stock, Scrap Machines, Pedestal Fans, Cabinets, Numerous 6” KURT Vises, #40 Taper Toolholders, Drills & End Mills, Hand Tools, Pneumatic Tools, Hydraulic Units, Etc..
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters
163 Associates LaneIndian Trail, North Carolina 28079
Toll Free: 888.800.4442 Direct: 704.821.4315Fax: 704.821.4325 – www.asset-sales.com
Asset Sales Inc. • Lance Mannion – North Carolina License #6625 * 6003
DAEWOO DHC40 CNC HORIZONTAL MACHINING CENTER
DIRECTIONS FROM KANSAS CITY AIRPORTExit Airport and take US-75 E. Take the exit onto OK-11 W / US-75 N toward Bartlesville for 77 miles. Turn right onto US-160E/US-75N/W Main St for 1.3 miles. Turn left onto Peter Pan Rd. for 1.8 miles. Turn right onto Taylor Rd for 2 miles. Turn left onto US-75N/N Pennsylvania Ave for 7.8 miles. Turn left to merge onto US-400W/US-75N toward Topeka/Wichita for 3.8 miles. Right lane for US-75 to Neodesha. Turn right onto US-75N for 1.3 miles. Left on N11th St to the plant. Follow auction signs.
HOLIDAY INN EXPRESS & SUITES 3401 Blue Comet Drive - Chanute, KS 66720 (620) 431-0817
HILTON GARDEN INN TULSA 7728 E. Virgin Ct. - Tulsa, OK 74115 (217) 352-9970
PUBLIC AUCTIONPLANT CLOSED
NEODESHA QUALITY MACHINELATE MODEL & MULTI-AXIS CNC
AEROSPACE MACHININGNEODESHA, KS
THURSDAY, JULY 26TH @ 10:00 A.M. CDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
2006
UPCOMING AUCTIONSTUESDAY, JULY 17th : Major ManufacturerLate Model Precision Tool Room Machine Shop, Support Equipment & OfficesOnsite / OnlineRock Hill, SC
THURSDAY, JULY 19th
Surplus of a World Class Precision Tool Mfg.Grinding & Plate Sawing FacilityIn Conjunction with Decosmo Industrial AuctionsOnsite / OnlineMount Airy, NC