tct asia 2020 section 1 general informationtctasia.com.cn/en exhibitor manual.pdfrow space...
TRANSCRIPT
TCT ASIA 2020
Section 1 General Information
1
Welcome Letter
Dear Exhibitor,
Welcome to TCT ASIA 2020 In order to assist you in your preparation for the coming trade show, we have designed this manual to simplify your arrangements.
Exhibitors are strongly advised to study the contents of this MANUAL carefully, and deal with all relevant matters promptly so that your requests can be processed smoothly.
To order our services, please use the online Exhibitors Service Centre.
If you have any questions, please do not hesitate to contact us. We wish you a successful preparation for the show and we are looking forward to meeting you in Shanghai!
Yours sincerely,
VNU Rapid News Co.,LTD Add: Tel: Fax: Email: Web:
Business Mansion, No. 1333 West Nanjing Road, Shanghai, 200040, PRC +86 21 6195 6088 +86 21 6195 6099 [email protected] www.tctasia.com.cn
TCT ASIA 2020
Section 1 General Information
2
General Information
The Exhibition
Name: TCT ASIA 2020
Venue: E5 & E6, Shanghai New International Expo Centre
Add: No. 2345, Long Yang Road, Pudong New Area, Shanghai 201204, PRC
Website: www.sniec.net www.tctasia.com.cn
DATES & OPENING HOURS
Date Time Raw Space Build-up 2020.07.06 09:00-22:00
2020.07.07 09:00-22:00
Shell Scheme Build-up 2020.07.07 09:00-22:00
Show Dates & Hours 2020.07.08 09:00-17:00
2020.07.09 09:00-17:00
2020.07.10 09:00-15:00
Teardown 2020.07.10 15:00-22:00
TCT ASIA 2020
Section 1 General Information
3
Contact Information
Show Management
VNU Rapid News Co., LTD
Add:
Tel:
Fax:
Email:
Web:
Business Mansion, No. 1333 West Nanjing Road, Shanghai, 200040, PRC
+86 21 6195 6088
+86 21 6195 6099
www.tctasia.com.cn
Official Stand Contractor
The following company has been appointed as the Official Contractor for this event.
Exhibitor, who requires assistance or services in stand design and construction, should contact:
Pico IES Group (China) Co.,Ltd
Tel:
Fax:
Email:
Contact:
+86 21 6010 8935
+86 21 6010 8601
Ms. Iris Lu
Recommended Raw Space Contractor
Shanghai Homer-Expo Service Co.,Ltd
Tel:
Fax:
Mobile:
Email:
Contact:
+86 21 5221 2001-832
+86 21 5221 2002
+86 136 36572023
Mr.Wang
Official Freight Forwarder
The following company has been appointed as the Official Freight Forwarders for the exhibition.
They will be responsible for the shipping, customs clearance and on-site handling of exhibit freight.
Shipment schedule, documentation and related matters will be handled directly between the
official freight forwarder and exhibitors. Please contact:
APT Showfreight Shanghai Co., Ltd.
Tel: +86 21 6124 0090 ext.320
TCT ASIA 2020
Section 1 General Information
4
Fax:
Mobil:
Email:
Contact:
+86 21 6124 0091
+86 138 1637 8123
Mr. Felix Fei
Official Hotel Agent
Orient Explorer China
Tel:
Fax:
Email:
Contact:
+86 21 5109 9795
+86 21 6464 4008
Ms. Leslie Huang
Drawing Inspecting
All one-storey above 4.5 meter height, two-storey, multiple-storey and outdoor (excluding stands
built inside outdoor tent) stands' drawings should be inspected by National Grade A Registered
Structural Engineer. The drawings shall be sent to the following company:
HAH Consulting & Exhibition Co., Ltd
Tel:
Fax:
Web:
Email:
Contact:
+86 21 2890 6633 ext.803
+86 21 2890 6000
www.hahchina.com
Ms. Jojo Li
Below 4.5m height stands' drawings shall be sent to the Official Stand Contractor:
Pico IES Group (China) Co.,Ltd
Tel:
Fax:
Email:
Contact:
+86 21 6010 8935
+86 20 6010 8601
Ms. Iris Lu
TCT ASIA 2020
Section 1 General Information
5
Exhibition Hall Information
Guide Map
TCT ASIA 2020
Section 2 Important Information
2.1 To reduce the contractor and exhibitors’ liability risk and ensure the construction site security,
every raw space booth exhibitor must purchase the exhibition liability insurance before
applying for booth drawing inspection, electricity power service and so on. After the exhibitor
purchased the insurance and then the exhibitor could apply for booth drawing inspection,
electricity power service and so on.
Exhibitors must have adequate insurance coverage against any and all eventuality
throughout the entire exhibition for their personnel, equipment, third party liability claims, and
movement of equipment in and out of exhibition halls.
2.2 To ensure the safety during the move-in and move-out period, all the raw space exhibitors
must log on to the Exhibitor Service Center and submit the Form Exhibitor Appointed
Contractor, the Form Safety Construction Manager Registration and the Form Electrical
Setting. The safety construction manager should be a full-time employee in the exhibitor
company (Not designated structures or other company personnel), responsible for safety
construction supervising at the show site during the move-in and move-out period.
All shell scheme exhibitors must log on to the Exhibitor Service Center and submit the
Form Name Fascia.
2.3 All ‘Raw Space’ contractors can only move-in after 9:00a.m. 06/07/2020 for buildup.
Importantly, exhibitors may employ qualified construction companies to carry out
construction and installation work. Construction must be in accordance with the government
regulations and be approved by the competent authorities. The staff should be working with
relevant certificates required by the government and in accordance with technical
requirements and standards.
2.4 To ensure the safety of the booth, any form of the cap contracture is prohibited.
2.5 Each row of the booths must not be longer than 32 meters, and all the passages must be at
least 3 meters wide and strictly complying with the standard booth layout provided by the
Centre. The maximum height of construction is 6 meters for one-storey booths and 8.5
meters for two-storey booths or above in halls. A repair passage of at least 1.0 meters wide
between any temporary structures and the wall surface shall be kept.
All one-storey above 4.5 meter height, two-storey, multiple-storey and outdoor (excluding
stands built inside outdoor tent) stands' drawings should be inspected by National Grade A
Registered Structural Engineer. The drawings shall be sent to HAH Consulting & Exhibition
Co., Ltd. Only the drawing is approved, the construction can begin. Please refer to Section 4
Row Space Construction Guide to see the approval process.
2.6 The exhibitor badges per exhibitor are limited. The number of maximum badges is related to
the booth size. Please log on to the Exhibitor Service Center to see more details and
submit the Form Badge All personnel in the exhibition halls must wear identification badges.
TCT ASIA 2020
Section 2 Important Information
The exhibitor badges cannot be altered or be replaced by a business card. Please refer to Section
8 Rules and Regulations. Due to the epidemic prevention and control, all exhibitors are required
to apply for the Permit of Construction in advance for their entrance to the exhibition halls
during the period of move-in.
2.7 All booths, except island configurations, must provide a full back wall, maximum of 2.5
meters in height. All exposed walls must be finished on all sides at the expense of the
exhibitor who owns the walls. All exposed wall areas or exposed structures must be covered
by new white PVC cloth without any break, contamination, graphics or texts. If the back wall
did not meet the above requirements, penalty will be deducted from the construction deposit.
The Organizer reserves the right to enforce the exhibitor to change the booth design and
construction in the case of such violations.
2.8 Concerning fire safety and security, it is prohibited to use elastic fabrics for any build-up and
constructions; other materials would not be allowed to use without anti-fire coatings.
All materials used in the construction and decoration of an exhibit must be flame retardant.
All carpeting and floor coverings must have Class 1 flame spread rating and UL between 0
and 25. No storage of flammable materials is allowed in the utility areas.
2.9 During the exhibition, the organizer will provide general cleaning of the exhibition hall
(excluding exhibitor’s booth) prior to the opening hours. Shell scheme cleaning work by
designated contractor responsible. During the build-up and tear-down periods, independent
contractors appointed by exhibitors are responsible for the removal of their own stand
building/dismantling materials and rubbish.
In addition, exhibitors of row space should pay the construction deposit before the booth
construction begins:
Below 50sqm: RMB 5,000/Booth/Show,
50-100sqm: RMB 10,000/Booth/Show,
101 - 200sqm: RMB 20,000/Booth/Show,
201 - 350sqm: RMB 30,000/Booth/Show
Over 350sqm: Calculated by area
2.10 All the exhibitors and constructors have to work within the given time. Exhibitors or
contractors who need to work beyond the above hours must apply to the organizer at the
entrance of each hall before 15:00 on the date intended and will be responsible for overtime
charges in cash imposed by the exhibition hall. 50% penalty fee will be charged for any late
orders received.
Charge standard for overtime is as follows:
TCT ASIA 2020
Section 2 Important Information
Move-in period (Jul. 06, 2020, 09:00- Jul. 07, 2020, 22:00)
Jul. 06, 2020, 22:00 – Jul. 07, 2020, 08:00:RMB 2600/Hour/Booth;
Jul. 07, 2020, 08:00 – 9:00:RMB 1300/Hour/Booth.
2.11 Packing of exhibits and dismantling of stands will commence on Jul.07, 2020 at 3:00 p.m.
when the exhibition closes. The Hall will remain open until 22:00 p.m. on that day for the
removal of hand-carried goods. All utility services to booths will be cut off 15 minutes after
the Exhibition ends. We strongly recommend that at least one member of your staff should
be on your booth at that time to ensure the safety of your displays whilst dismantling is taking
place.
2.12 Volume control
To ensure a business conducive to atmosphere within the exhibition halls, the use of
acoustic speakers on any booth is forbidden. Volume control must be under 70 decibels in
the Exhibition hall at any time. If the volume exceeds 70 decibels, the organizers reserves
the right to demand that the exhibitor lower down the volume, and to take further action such
as cutting off electricity supply to the booth if the exhibitor refuses to comply. In case of
violation of this rule, the construction deposit fee will not be refunded to the exhibitor.
2.13 Explanation of business invitation
The invitation will not be regarded as an admission ticket. For visitors with invitations, please
login to https://www.tctasia.com.cn for Pre-Registration and Real-Name Authentication.If you
only have the invitation without pre-registration, 50 RMB admission ticket will be charged at the
door.
2.14 Outer food and beverages are prohibited to enter the exhibition venue.。
TCT ASIA 2020
Section 3 Shell Scheme Construction Guide
Official Stand Contractor
The following company has been appointed as the Official Contractor for this event. Exhibitor who
require assistance or services in stand design and construction, please contact:
Pico IES Group (China) Co.,Ltd.
Add:
Tel:
Fax:
Email:
Contact:
No.99, lane 4499, cao 'an highway, jiading district, Shanghai
+86 21 6010 8935
+86 21 6010 8601
iris.lu@ pico.com
Ms.Iris Lu
Decorated Space Facilities
Decorated Booth consisting of a shell scheme [Unit Size: 1m (W) x 3mm (D) x 2.44m (H)] includes
the following as indicated by the total square meters of your space:
(Note: the following furniture and electrical equipment can not to be replaced)
Shell Scheme 9m2 12m
2 15m
2 18m
2 21m
2 24m
2 27m
2 30m
2 33m
2 36m
2
Carpet:
covering the
entire floor area
of the booth.
√ √ √ √ √ √ √ √ √ √
Infocounter
1000mmH 1 1 1 2 2 2 3 3 3 4
Meeting chair 3 3 3 6 6 6 9 9 9 12
White round table 1 1 1 2 2 2 3 3 3 4
LED Long Arm
Spotlight 2 2 2 4 4 4 6 6 6 8
Power: 5A/220V
Single 1 1 1 2 2 2 3 3 3 4
Wastepaper
Basket 1 1 1 2 2 2 3 3 3 4
TCT ASIA 2020
Section 3 Shell Scheme Construction Guide
Shell Scheme Diagram:
Additional Electrical Services and Rental Furniture
The power outlet in the shell scheme is only for generally domestic/ offices electrical appliance
other than lighting. Exhibitors, who require additional lighting, can log on to the Exhibitor Service
Center and submit the Form Electrical Setting. (Use electricity for machine or lighting must be
separately apply), and booth must purchase exhibition responsible insurance and pay for booth
deposit
Besides the standard configuration, you can also rent additional furniture or display facilities.
Please log on to the Exhibitor Service Center and submit the Form Furniture, Lighting & Socket
Rental.
Rules and Regulations for Decorated Space Exhibitor
TCT ASIA 2020
Section 3 Shell Scheme Construction Guide
Shell scheme exhibitors in the layout of their booth, must further perform the following provisions
of the General Assembly appointed by the contractor:
1. All booth structures are used for the high quality aluminum products, so exhibitors cannot drill,
use screw nail, nails or metallic sharp nails, or pins for the booth layout.
2. Wallpaper, Glue, destructive tape, adhesive paper or paint cannot be used directly on the
board to the booth decoration
3. Exhibitors are not allowed to increase the structure of the standard booth to add other
additional configuration.
4. The shell scheme configuration is unified, standard booth exhibitors, where marked with the
company name lintel board by the General Assembly specified contractors unified production
5. Details for any package upgrade booth including elevation view, side view and 3D view of the
booth with detailed materials indicated are required to be submitted to the Official Contractor
before Jun.05, 2020 for approval. Package booth upgrade can only be applied from exhibitors
whose booths sized larger or equivalent to 24sqm and height limits 2.5m.The Organizers reserve
the right to tear down any package upgrade booth on-site without prior approval from the Official
Contrator.
6. Any lightings, sockets and other electric fixture supplied by exhibitors are not allowed to be
connected to the shell scheme power point,extra power point is required. Meanwhile, the
exhibitor or their contractor need pay corresponding management fee and damage deposit to
Official Contractor.
7. The rest of the exhibition and the relevant rules and regulations, please be sure to carefully
read Section 8 Rules and Regulations.
8. If there is any violation of the above provisions, all disputes arising from the full responsibility of
the dispute
TCT ASIA 2020
Section 3 Shell Scheme Construction Guide
9. According to the "Regulations of the People's Republic of China on Environmental Protection
Law" and "Shanghai Environmental Protection Regulations" ,and relevant requirements of
government departments, KT board materials are forbidden at the exhibition; exhibition wastes
such as carpets and low-pressure plastic paper (bubble plastic paper) must be taken away and
properly handled by exhibitors and contractors after the exhibition.
At the same time, if the shell scheme needs to construct any structure in the booth, the deposit
must be delivered to the office contractor before the exhibition. If the booth is completely cleaned
up,and confirmed by the staff of the exhibition hall, the deposit will be refunded after the
exhibition.
Deposit: RMB 2000.00 / booth
Booth rental electricity requires bring the self-contained power control box with grounding wire by
yourself, and all rental pavilion facilities: must be strictly placed in the booth (if the warehouse is
placed in the booth warehouse, the warehouse must be kept open);It is forbidden to hang up to
the outer wall of the booth and place the exhibition passage.
10. Shell scheme appear: rented the exhibition hall facilities, pasted pictures in the booth,
self-contained structural furniture and other circumstances, and the deposit will be paid according
to the specific conditions.
11. If you need to rent furniture at the exhibition, please go to the on-site service office. In order
to avoid unnecessary economic losses and safety hazards in the booth, it is strictly forbidden to
rent furniture through unofficial channels and connect the wires without authorization, paste the
super high picture and change the structure of the booth structure. Once found, all are removed.
12. Exhibitor trucks need to reserve a vehicle waiting card before the exhibition.
13. Due to the epidemic prevention and control, all exhibitors are required to apply for
the Permit of Construction in advance for their entrance to the exhibition halls during the
period of move-in.
TCT ASIA 2020
Section 4 Raw Space Construction Guide
Decorated Space Facilities
Raw Space exhibitors will be given a floor space without booth facilities, carpet or power supply.
They must design and construct their own booths, lay the carpet.
Exhibitors may employ qualified construction companies to carry out construction and installation
work. Construction must be in accordance with the government regulations and be approved by
the competent authorities. The staff should be working with relevant certificates required by the
government and in accordance with technical requirements and standards.
The design, building and dismantling of the raw booth must comply with the government
fire control laws and regulations. Raw-space exhibitors should submit the booth design
and construction drawing to the official contractor one month before the show open, and
be filed to the government fire control department.
Any consequence which is caused by against the organizer’s regulation, the exhibitor will
take the full responsibility.
Contractor Required Documents and Move-in Procedure
Exhibitors who rent raw space can appoint their own contractors to set up the booth. Please
ensure you and your contractor read the following information and follows all regulations as
detailed below in order to ensure your plans can be approved in good time thus avoiding potential
TCT ASIA 2020
Section 4 Raw Space Construction Guide
problems and costly amendments.
Remark:
1. Documents A, B, C, D, E, F should be submitted to office contractor review. At the same time,
pay the order, the management fee and the booth deposit. After completing the audit and
payment, receive the deposit slip at the site and then make the construction badge.
The management fee: RMB 35.00/sqm/extension.
2.
The general flaw path: Audit information and drawings and pay the construction deposit
and management fee to the official constructor > Receive the deposit slip at the site--->
Make the construction badge (documents needed: original Identity Card, building
management fee payment confirmation and construction deposit receipt). Construction
badge price: RMB 50/piece, badge center: +86 21 2890 6100). All construction workers
TCT ASIA 2020
Section 4 Raw Space Construction Guide
have to wear the badge. Due to the epidemic prevention and control, all exhibitors are
required to apply for the Permit of Construction in advance for their entrance to the
exhibition halls during the period of move-in.
3. You can apply for the set-up/dismantle badges from Jul.06,2020 and “Vehicle Pass” from
Jul.07,2020 with the receipt of construction deposit and sealed “The Safety Commitment of
Erection Contractor”. For detail information, you can refer to “The Flow Chart for Obtaining
Certificates” .
4. Trucks need to reserve vehicle waiting cards before the exhibition
Design Approval
According to latest provisions of the Shanghai New International Expo Center, the exhibition of
the stand trial and building work to be as follows:
One-storey with 4.5 meter height, two-storey, multiple-storey and outdoor (excluding stands built
inside outdoor tent) stands' drawings must be approved by the venue Shanghai New International
Expo Centre (SNIEC) appointed unique booth surveyor HAH Consulting & Exhibition Co., Ltd.
Shanghai. Only the drawing is approved, the construction can begin.
1、 The design drawing (2 copies) as followed:
A. Booth perspective drawing (1front-side and 2 sides)
B. Ground floor plan (ground floor plan & 2nd floor plan)
C. Booth planning specifications and technical data of building materials
D. Front elevation drawing
E. Sectional drawing
F. Construction drawing
All drawings must indicate the axis of the beam and column sizes and the dimension of all
structural materials.
2、 All construction institutions entering the exhibition hall to start stand construction must provide
HAH with copies of their business license certificate imprinted with company seal, which will
be used for filing purpose.
3、 Construct of all above exhibition stands, structural drawings must be provided, which shall be
imprinted with seals of National Grade A Registered Structural Engineer for confirmation,
accompanied by structural calculation sheet.
TCT ASIA 2020
Section 4 Raw Space Construction Guide
4、 Structure of two-story exhibition stand must be equipped with fire extinguishers that have
passed annual inspection.
5、 Process of Design Approval
6、 Price standard
one-storey with 4.5 meter height 2nd (or above) floor sqm + ground floor sqm
Drawing inspection fee: RMB 25/sqm
Re-inspection fee: RMB 18/sqm
Drawing inspection fee: RMB 50/sqm
Re-inspection fee: RMB 25/sqm
Notes:
TCT ASIA 2020
Section 4 Raw Space Construction Guide
Drawing inspection means directly relegating to SNIEC for inspection; Re-inspection means after
approval by Grade A National Registered Structural Engineer, SNIEC will re-inspect the drawings.
7、 Deadline:
The drawings shall be arrived to HAH Consulting & Exhibition Co., Ltd (authorized Structural
Inspector by SNIEC) before Jun.05, 2020. If the drawings are issued after deadline, 30% of the
amount as overdue penalty will be charged; if the drawings issued during the move-in time, 50%
of the amount as overdue penalty will be charged.
8、 For design drawings for two-storey, multiple-storey and outdoor stands, if neither reviewed by
Grade A registered structural engineer nor re-inspected by HAH Consulting & Exhibition
Co., Ltd. Shanghai, the organizer, SNIEC and HAH are authorized to prevent the
construction by such exhibitor in the scope of SNIEC.
9、 More Information please contact the following:
HAH Consulting & Exhibition Co., Ltd
Tel:
Fax:
Web:
Email:
Contact:
+86 21 2890 6633 ext.803
+86 21 2890 6000
www.hahchina.com
Ms. Jojo Li
Booth Deposit Management:
All raw space EACs are required to pay the construction deposit to official contractor
before Jul.06, 2020. The specific standards are as following:
Item Booth space Cost
1 <50sqm RMB 5,000/booth/show
2 ≧50sqm,≦100sqm RMB 10,000/booth/show
3 ≧101sqm,≦200sqm RMB 20,000/booth/show
4 ≧201sqm,≦350sqm RMB 30,000/booth/show
5 >350sqm Calculated by area
Notes:
1. The deposit can be charged for bank transfer only
A/C No.: 409474014301
Bank Name: STANDARD CHARTERED BANK SHANGHAI BRANCH
TCT ASIA 2020
Section 4 Raw Space Construction Guide
Address: 26th Floor Standard Chartered Tower,201 Century Avenue Pudong ,Shanghai
200120,China
A/C Name: PICO IES GROUP (CHINA) CO., LTD
Swift Code: SCBLCNSXSHA
2. Refund method of Deposit:
If you pay with cash, after Jul.10,2020 the tear down is finished, the construction deposit
will be refunded if the security and cleaner confirm that all the exhibits and construction
materials have been removed out of the hall and no damage to the floor or facility.
Exhibitors can go to the onsite office at the entrance of each hall with the security and
cleaner signed receipt and get the deposit. Return original deposit slip.
For exhibitors who paid by card,the construction deposit fee will be refunded to their
original bank account within 1 months (30 workdays).
3. Deduction of Deposit
A. The compensation fee of any damages will be charged before Jul.10, 2020. After the
payment is done, the cleaning, security, and the garbage company can sign.
B. If the onsite booth structure has big difference from booth perspectives and it is against
the related rules and regulations, all deposit will be deducted as penalty.
C. If the booth hasn’t been corrective according to the Show Management’s
requirement. Show office will rectify the booth, all the related cost will be deducted
from the deposit. If the deposit can’t cover the cost, exhibitor has an obligation to pay.
D. If the dismantlement hasn’t been done after the show closes on Jul.10, 2020 the
venue cleaner will deduct the deposit for booth dismantlement.
E. According to the "Regulations of the People's Republic of China on Environmental Protection
Law" and "Shanghai Environmental Protection Regulations" ,and relevant requirements of
government departments, KT board materials are forbidden at the exhibition; exhibition wastes
such as carpets and low-pressure plastic paper (bubble plastic paper) must be taken away and
properly handled by exhibitors and contractors after the exhibition.
It is strictly forbidden to discard it within the scope of the exhibition hall. Once found, the all booth
deposit will be deducted.
Rules and Regulations for Raw Space Exhibitor:
TCT ASIA 2020
Section 4 Raw Space Construction Guide
1. Back Wall
All booths, except island configurations, must provide a full back wall, maximum of 2.5
meters in height. All exposed walls must be finished on all sides at the expense of the
exhibitor who owns the walls. All exposed wall areas or exposed structures must be
covered by new white PVC cloth without any break, contamination, graphics or texts. If the
back wall did not meet the above requirements, penalty will be deducted from the
construction deposit.
2. Distribution of Promotional Material/Displays
Displays must be confined within the exhibitor’s booth and must not be designed to
obstruct the clear view of nearby booths or interfere with the flow of traffic example: video
monitor(s) should be places where visitors viewing the monitor(s) do not block the aisle. If
height exceeds the requirements, the machine, equipment or products will not be set up
to display the display, so as not to cause unnecessary damage.
3. Ceiling Suspensions
The suspension point and advertising banner over the stand can be applied. Please fill and
send the form to Official Stand Contractor before Jun.05,2020. Please log on to the
E-forming System and submit the Form Hanging Points .
4. Decoration
Show Management has the authority to determine whether placement, arrangement and
appearance of all items displayed by the exhibitor are in compliance with the exposition
standards. This may require the replacement, rearrangement or redecoration of any item
or of any booth. Show Management is not liable for any cost that may be incurred by the
exhibitor.
All booth spaces (unless otherwise specified) must be fully carpeted or covered. Carpeting
enhances your corporate image and continues the overall professional look of the
exposition. You may supply your own carpet or rent it from the Official Stand Contractor.
All floor coverings must be fire retardant in compliance with local fire department
regulations.
5. Booth Identification
Placement: Company identification cannot be placed/ erected outside the booth area.
Signs: All signs, posters and booth graphics must be professionally lettered and in
compliance within the proper height limitations. Show Management reserves the right to
change or remove signs (at the exhibitor’s expense) that are not in keeping with the
overall quality standards of the exposition.
TCT ASIA 2020
Section 4 Raw Space Construction Guide
6. The rest of the guidelines and requirements, please refer to Section 8 Rules and
Regulations.
Rules and Regulations for Exhibitor Appointed Contractor:
1. All EACs are required to have a Set-up/Dismantle Badge while on the exposition floor.
2. The EAC agrees that it will indemnify, and hold harmless, the Show Management and the
Official Contractor from any action on account of injury or damage to persons or property
caused by an act of omission, negligence or misconduct on the part of the EAC or any of its
agents, servants, employees, or contractors.
3. The EAC shall not erect a service desk and must restrict corporate identity to the booth areas
being serviced. Personnel carriers will not be permitted on the exhibit floor without the approval
of Show Management.
4. The EAC will adhere to all rules and regulations and shall complete their assigned services
within the exhibitor official time limits of move-in and move-out as soon as published by VNU
Show Management. Exhibitors are responsible for the action of their EACs.
5. Exhibitors and their EACs are requested to wear safety helmet during Set up/Dismantle period.
6. Ladders for work 2m or over are not permitted, must use scaffold or working platform.
7. All the EACs must read Safety Commitment issue by SNIEC & Safety Construction Guideline
in detail.
* Please inform your EAC that they must comply with all criteria in the exhibitor services manual
before being issued badges which will allow them to work or supervise on the show floor during
Set up/Dismantle period.
Rules and Regulations for Booth Construction
1. To ensure the safety of the booth, any form of the cap contracture is prohibited.
2. Each row of the booths must not be longer than 32 meters, and all the passages must be at
least 3 meters wide, and strictly complying with the standard booth layout provided by the
Centre. A repair passage of at least 1.0 meters wide between any temporary structures and
the wall surface shall be kept.
TCT ASIA 2020
Section 4 Raw Space Construction Guide
3. The maximum height of construction is 6 meters for one-storey booths and 8.5 meters for
two-storey booths or above in halls.
4. No nails, adhesives, drawing pins, or similar materials or hole-drilling shall be applied to any
part of the premises.
No work should be carried out in the entry lobby without permission. Any structure or other item
is not allowed to lean on and fix with the facility or structure of the Centre.
5. No build-up work shall be carried out during the Show Days. Raw space’s constructor is
responsible for dismantling the structure of all booths and moving all abandoned materials to
certain place appointed by organizer.
Raw space`s constructor shall compensate for any damage to the facilities and equipment in
the Centre caused by construction, installation, dismantling and transportation.
6. Raw space’s constructor is responsible for dismantling the structure of all booths and moving
all abandoned materials to certain place appointed by organizer.
Raw space’s constructor shall compensate for any damage to the facilities and equipment in
the Centre caused by construction, installation, dismantling and transportation.
7. No smoking is allowed in Leased Area and anywhere in the Centre with non-smoking signs.
8. No hanging object is allowed in the Centre without permission. Each permitted hanging point
may bear an object which weighs no more than 200KG. The professional staff of the Centre
shall conduct the hanging work. The hanging point cannot be used to fix the structure
connected with the floor. Exhibitors, who require hanging points, can log on to the E-forming
System and submit the Form Hanging Points.
9. Operators who are engaged in overhead work (height≥2M) must wear safety helmets and
safety belts, and carry out other necessary safety measures against injuries that might be
caused by falling objects.
10. Only qualified overhead operation tools may be used; unqualified ones are expressly
prohibited. When passing tools or objects, throwing is forbidden. Methods such as
hand-to-hand passing or conveyance of tools or objects by bags, or lifting up and/or down
with ropes, shall be adopted.
11. Unqualified operators are forbidden to do overhead work, and it is also strictly forbidden to do
overhead work after drinking alcohol.
TCT ASIA 2020
Section 4 Raw Space Construction Guide
12. The inlets, outlets and connections to be installed on the stand must be ordered from the
facility by completing the corresponding order form which can be found in Form Section of
this manual.
13. Official controllers, being fully empowered to authorize or prohibit the installation or to require
alterations so as to meet technical and legal requirements, will inspect all on-stand
installations.
14. Exhibitors are liable for any technical faults or damage that may result from non-compliance
with the provisions as stipulated by the facility.
15. A sketch showing the desired position of the installations must accompany all order forms.
16. Extended hours for set-up can be requested at on-site service counter near each hall
entrance before 15:00 every day with an additional fee.
Electric safety
A. All matters relating to the use of electricity, by the general assembly to specify the
specific operation of the contractor, the exhibition of light to rent booth exhibitors need
to take charge of electricity. The organizers of all installations with electric equipment
have strict regulations and restrictions, please be sure to submit the relevant
construction and installation data 1 month in advance, to the organizer’s approval.
The engineering operations approved by the organizer shall not be carried out.
B. Exhibitors are strictly forbidden to install their own connections to the floor boxes.
C. Use of another Exhibitor’s electrical hook-up is strictly forbidden due to potential fire
and hazard risks. In the event that the exhibit hall is damaged or destroyed due to
negligence or failure on the part of the exhibitor to comply with the local fire agency’s
fire and hazard regulations, the Exhibitor is responsible and liable for all damages
incurred.
D. All matters relating to the use of electricity, by the general assembly to specify the
specific operation of the contractor, the exhibition of light to rent booth exhibitors need
to take charge of electricity. The organizers of all installations with electric equipment
have strict regulations and restrictions, please be sure to show the approach to build
the previous month to submit the relevant construction and installation data in the
organizer approval. The engineering operations approved by the organizer shall not be
carried out.
E. All connecting boxes in operation on the floor must be accessible at all times.
TCT ASIA 2020
Section 4 Raw Space Construction Guide
Booth rental electricity requires bring the self-contained power control box with grounding wire by
yourself, and all rental pavilion facilities: must be strictly placed in the booth (if the warehouse is
placed in the booth warehouse, the warehouse must be kept open);It is forbidden to hang up to
the outer wall of the booth and place the exhibition passage.
17. Fire Protection Measures/Fireproofing
All materials used in the construction and decoration of an exhibit must be flame retardant. All
carpeting and floor coverings must have Class 1 flame spread rating and UL between 0 and 25.
No storage of flammable materials is allowed in the utility areas.
Written approval must be obtained from the Shanghai Fire Safety Bureau for the following:
1) Display and operation of any heater, barbecue, heat producing or open flame devices, candles,
lanterns, torches, welding equipment or other smoke emitting materials as part of the exhibit.
2) Display and operation of any electrical, mechanical, or chemical devices which may be
deemed hazardous. If there is any question, if devices may be deemed hazardous, submit
them to the appropriate controlling authorities for approval.
3) All toxic and hazardous material, including flammable liquids, compressed gas or dangerous
chemicals. Special care must be taken not to obstruct or hide from the view to the fire
protection system, air conditioning, mechanical ventilation vents, fire safety equipment, fire
hose reel/riser cabinets, fire alarm pull stations, house lighting fixtures and supervising
systems.
4) Any combustible material is prohibited during the building, especially elastic fabrics.
18. All the exhibitors must read Safety Construction Guide in details.
TCT ASIA 2020
Section 5 Insurance
The organizer reminds all exhibitors that they should be responsible for assets and personal
injury of people in their exhibition booths, and they also shoulder the same legal responsibility for
their staff, representatives, exhibition tooth building business and sub-contractor. In order to
transfer the responsibility risk of building special exhibition booths and ensure insurance of on-
site constructors, before they deal with reporting, draw checking, deposit payment and other
entrance procedures, each special exhibition booth must purchase exhibition responsible
insurance which meets requirements of this regulation in advance.
A. Insurance requirements of special exhibition booths are listed below:
1. The insured should include exhibitors and building businesses at the same time, and
“VNU Rapid News Co.,LTD” should be listed as additional insured unit.
2. The insurance scale should include:
1) Loss of the architecture, various fixed equipment and floor and groundwork inside
exhibition place; the accumulated reimbursement limit is RMB 500,000 Yuan.
2) Pensions, medical expenses and other related charges resulted from personal injury of
hiring staff; the accumulated reimbursement limit is RMB 1.5 million, and the accumulated
reimbursement limit for each person is RMB 500,000 .
3) Pensions, medical expenses and other related charges resulted from personal injury of
the third person; the accumulated reimbursement limit is RMB 2 million, and the
accumulated reimbursement limit for each person is RMB 500,000.
The premium is 90.00 USD.
B. The applicants of special exhibition booths can select designated insurance facilitator
of this exhibition --- “exhibition insurance web- http://www.exhibitionguard.com/” to
insure online; they can also choose other insurance facilitators to insurance, but the
insurance policy must meet insurance requirement of special exhibition booths, and
pass the check of “exhibition insurance web- http://www.exhibitionguard.com/”.
C. Exhibition insurance web adopts online insurance method, and the specific
procedures are listed below:
Login website: http://www.exhibitionguard.com/
1. Fulfill basic information of applicants, choose safeguard scale and corresponding premium and pay online or offline.
2. After paying online successfully (recommend payment method), you will receive “code of
insured” by the confirmation e-mail or message in one working day, and the system will turn
TCT ASIA 2020
Section 5 Insurance
to the exhibition service system interface for the consecutive operations.
http://ordering.picoies.cn/Building/login.aspx?showcode=e8f2e46a-3e48-472a-9f4f-
1726d0b9d3eb
3. If you choose offline payment, please remit money to the designated account according to
the direction of payment notice; then, please mail payment voucher to
[email protected] and it will send you an e-mail including “code of insured” after
receiving premium. Please re-login exhibition service system interface for the consecutive
operations. http://ordering.picoies.cn/Building/login.aspx?showcode=e8f2e46a-3e48-
472a-9f4f-1726d0b9d3eb
If exhibitors want to exercise property and responsibility risk transfer for your exhibits, you
can choose to insure transportation insurance and property insurance. ExhibitionGuard.com
will try the best to provide favorable premium rate and insurance service. Exhibition
insurance web- ExhibitionGuard.com is the designated insurance facilitator of this exhibition.
China inbound service hotline 400 821 6600
Overseas exhibitors please call 86 21 6856 0065
If you have any questions, please login our website and ask online, or send an e-mail to
[email protected] , and we promise that we will reply within one weekday.
D. If you are dissatisfied with our insurance service, or you have any suggestions,
please contact:
Ellinor Gu mailto:[email protected]
E. On-site insurance claim service:
If there are any insurance accidents, please take photos to obtain evidence of accident
scene, and call on-site report phone of 95588 or 400 821 6600.
Requirement of insurance claim document:
a) Loss advice with official seal;
b) Loss list with official seal;
c) Accident situation description of the insured or accident settlement report of the damaged
party with official seal;
d) On-site photos of accident;
t
TCT Asia 2020
8 - 10 July, 2020
SNIEC, Shanghai China
亚洲 3D 打印、增材制造展览会暨 TCT 亚洲峰会
Shipping Manual and Tariff (For General Exhibits Temporary Import)
普通展品(临时进出口)运输指南及费率
APT Showfreight Shanghai Co., Ltd. Room 2005, Modern Plaza Tower 1, 369 Xian Xia Road, Shanghai 200336 PR China Tel: 86 (21) 6124 0090 Fax: 86 (21) 6124 0091 Email: [email protected]
上海安普特物流有限公司
上海市仙霞路 369 号现代广场 1 号楼 2005 室
电话: 86 (21) 6124 0090
传真: 86 (21) 6124 0091
Page 1 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
TIME SCHEDULE 时间表
LOE (list of exhibits) or ATA Carnet copy Deadline to APT
ATA 单证册扫描件及展品清单提交 APT 截止日期
………
17 JUN 2020
2020 年 6 月 17 日
Exhibits Arrival Deadline by Sea Freight to Shanghai Seaport
展品海运发运至上海港
……… 21 - 22 JUN 2020
2020 年 6 月 21- 22 日
Exhibits Arrival Deadline by Air Freight to Shanghai PVG Airport
展品空运发运至上海浦东机场
……… 23 - 24 JUN 2020
2020 年 6 月 23 - 24 日
DOCUMENT REQUIREMENT 所需文件
1 original Bill of Lading or 1 copy of Express Bill of Lading or 1 copy of Master Air Waybill and 1 copy of House Air Waybill
海运提单正本一份 / 电放海运提单副本一份 / 空运总运单及分运单副本各一份
1 copy of List of Exhibits (abbr. as LOE, the legitimate document accepted by Customs, refer to the appendix) or ATA Carnet with POA / 1 copy of Insurance Policy (if insured)
展品清单一份(海关审核的法定文件,参见附件)或者 ATA 单证册及授权书和保险单一份(如有)
** If any machine or display model, please provide correct model or serial number on LOE or ATA. Photo of each item declared on ATA Carnet should be attached with ATA general list page.
请注意:如有任何设备或演示模型等,请务必在展品清单或 ATA 单证册上提供正确的型号。ATA 上
所列明的所有品名都需要提供照片作为附件由 ATA 签发商会盖章并附在 ATA 总清单后。
CONSIGNMENT INSTRUCTION 发运指示
All cargoes must be consigned “Freight Prepaid” to the following consignee, otherwise a 10% outlay commission will be imposed on all “Freight Collect” consignments. Each AIR shipments should be under ONE MASTER Air Waybill with ONE HOUSE Air Waybill (not for each exhibitor) and the HAWB must be manifested by airline. Please send draft B/L or AWBs to APT Showfreight for checking before shipping. Additional charges will be incurred for wrong consignee details.
所有展品必须以“运费预付”发运并必须按下列要求显示收货人。若展品以“运费到付”发运,我司将收
取运费百分之十的垫付附加费。每票空运均须出具一份总运单及一份分运单(不要每家展商出一份分运
单)并且分运单须录入航空公司舱单。请在发运前务必将提单或空运单确认件提前发给安普特确认。若因
收货人资料错误而产生额外费用,我司将另外收取。
Seafreight to Shanghai Seaport (海运)
Airfreight to Shanghai PVG Airport (空运)
Consignee on B/L (for temporary import): APT Showfreight Shanghai Co., Ltd. Room 2005, Modern Plaza Tower 1 369 Xian Xia Road, Shanghai 200336 CN CT: 0086 21 6124 0090 Fax: 0086 21 6124 0091 CP: Felix Fei T: USCI+91310116674641664W Notify Party on B/L (for temporary import): Same as consignee (Remark: If shipment under ATA Carnet, please also show: ATA Carnet No.: XXX) Description of Goods on B/L: One or two highest value item description inside shipment, for example: Wire Bonder (Remark:
Consignee on both Master AWB & House AWB (for
temporary import): Sky International Logistics Co., Ltd. (FFE) 506 Warehouse No.180 Airport Highway, Pudong International Airport, Shanghai 201202 CN CT: 0086 21 5683 3173 CP: Lily Chen T: USCI+91330201772308339Q Notify Party on both Master AWB & House AWB (for temporary import): APT Showfreight Shanghai Co., Ltd. CT: 0086 21 6124 0090 / Fax: 0086 21 6124 0091 CP: Felix Fei T: USCI+91310116674641664W (Remark: If shipment under ATA Carnet, please also show: ATA Carnet No.: XXX)
Page 2 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
Please DO NOT show simple description as ‘exhibition goods’ and detail exhibition name.)
Nature of Goods on Master AWB: Consolidation as per cargo manifest One or two highest value item description inside shipment, for example: Wire Bonder (Remark: Please DO NOT show simple description as ‘exhibition goods’ and detail exhibition name.) Nature of Goods on House AWB: One or two highest value item description inside shipment, for example: Wire Bonder (Remark: Please DO NOT show simple description as ‘exhibition goods’ and detail exhibition name.)
Please be noted that if only MAWB is issued, the shipment may not be distributed to our assigned warehouse right after the shipment arriving airport. Therefore, a HAWB which is manifested by airline for the whole shipment must be issued in addition so as to avoid any extra terminal and/or storage charges levied.
请注意如果货物只有总空运单,这会导致货物无法在到达机场后直接送至我们的指定仓库,而且会大大增加
机场的操作费用以及仓储费用。 所以请在发货时,除了总空运单,也一并出一份有效的分运单(针对整票货即
可),以免产生不必要的额外费用。
TEMPORARY IMPORTATION 临时进口 The Chinese Authorities permit exhibits to be imported into China on temporary importation basis on approved trade shows. Temporary import is allowed for 1 month from the date of entry and must be re-exported after show closing. Extension of temporary import is allowed subject to Customs’ approval. ATA Carnet is accepted for temporary import in China, but ONLY for purpose as ‘Exhibition & Fairs’. Customs Bond Fee will be levied for temporary import shipment without ATA Carnet.
All exhibition goods by temporary import are under Customs control. Exhibitors should not allow their exhibits to be sold, abandoned or taken away from the fairground without prior agreement with the China Customs through APT Showfreight, otherwise exhibitors will get severe punishment by the China Customs.
中国海关允许展品以”临时进口货品”名义进入中国,除得到海关批准,一般展品从抵迏中国口岸起计算最多可存
放一个月。期满后展品必须回运。
中国海关接受 ATA 国际公约,但仅限用途为“展览品”。 如果货物没有 ATA 单证册,将收取海关保证金。
所有展品受中华人民共和国海关监管,因此应遵守中国海关的相关法律及法规。未征得海关同意,任何人
不得将展品遗弃、出售或搬离展馆,否则海关将依法追究该展商的法律责任。
PERMANENT IMPORTATION 永久进口 For permanent importation of any exhibits after show closing, the buyer in China (with valid import document) shall be acted as the actual consignee. Exhibitor is required to provide APT Showfreight the actual buyer’s information as well as the party who will bear the duties / taxes. Please contact us in advance / before shipping if any permanent importation of exhibits is required. We shall check and advice on each individual case.
如果展品在展会结束后必须留于中国,中国的买家(持有效的进口文件)必须作为通关中的实际收货人。
展商必须告知 APT 有关实际买家的相关信息以及税项的付款人。
请预先在发货前与我们联络,我们会查询后按个别案例提供方案。
Page 3 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
CONTROLLED ITEMS IN CHINA 中国受管制的物品
In case the shipment contains any controlled items by the Chinese Government, we strongly recommend that the list of exhibits should be e-mailed or faxed to APT Showfreight for checking prior to the shipment departure from the country of origin. If required, APT Showfreight will apply necessary license/ permit on behalf of the exhibitors, but under no circumstances that APT Showfreight can guarantee such license will be granted.
The importation of below commodities is under Customs strict control even for exhibition purpose and subject to special permit in China: - Foodstuff, Beverage - All tableware / kitchenware such as (paper, glass) cup, mug, tissue/wipe & bowl etc., - Watches, toys - Cosmetics / Skin care items - Any items / materials with Endangered Species - Animal, plant - Art articles, Antiques, Jewelry and etc., - Solid wood or plywood full set of furniture. All stand building material such as wooden or plywood or MDF floor / panel and etc., or furniture component /accessory - All electric products such as mobile charger, portable battery charger/bank, lamp, wire, cable, plug and etc. - Glass or plastic products such as glass panel for stand building material - Chemical products such as: cleaner, glue, paint and etc., - Medical products such as Medicine, First-aid kit and etc.
Without Chinese Customs’ approval, these items can’t be imported, distributed/ tasted/ sold
and/or consumed during the exhibition. If exhibitors need to ship any controlled items to China, exhibitors are required to submit to APT Showfreight the following documents / information for application of import permit to China at least 60 (Sixty) days prior to the shipment departure from the country of origin:
a. Catalogue / Brochure of commodities b. Export Permit Issued by the Products’ Originating Country/ Place c. Certificate of origin and/or Health Certificate (if required) d. Commercial Invoice and Packing List / List of Exhibits
Relevant guidelines and permit application fee in China for controlled items will be quoted upon request.
为了避免因展品中含有受中国政府管制的物品而导致被扣留,我们强烈建议展商在从所在国发运展品前将
展品清单/商业发票和装箱单以电邮或传真至我司以备提前检查确认。
如必要,我司可协助展商代理申请必须的进口许可证, 但任何情况下我司都无法保证许可申请可获批准。
以下商品受中国海关严格控制,即使作为展览会用途,也必须提供有关许可证:
- 食品、饮料
- 所有餐具 / 厨房用具,如:( 纸,玻璃)杯子,纸巾,碗 等物品
- 手表、玩具
- 化妆品 / 护肤品
- 含濒危物种材质物品
- 动物、植物
- 艺术品、古董、珠宝等货物
Page 4 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
- 实木或夹板成套家具、所有搭建材料(包含但不限于:实木或夹板或中密度板制地板、展板、展墙或
家具的部件和零件)
- 所有电子产品,如:手机充电器、充电宝、灯、电线、电缆、插座等
- 玻璃和塑料制品,如搭建用的玻璃板
- 化学物品,如:清洁剂、胶水、油漆等
- 药物,如药片、急救箱等
如未得到准许及认可,此类物品将不能进口,不允许在展会派发/品尝/售卖或消耗。
如展商需要把任何受管制的物品运往中国,展商须在货物发运日 60 天之前向我司提交如下单据/信息:
a. 产品目录/商品的小册子
b. 产品原产地/国签发的出口许可证
c. 原产地证书以及健康证明书(如需)
d. 商业发票和正表的装箱单 / 展品清单
有关手续费及许可证申请费将另行报价。
PRINTED / PUBLICITY MATERIALS RESTRICTIONS 印刷品 / 宣传资料之限制
All exhibitors are advised that all promotional materials to be imported or giveaways during the exhibition must not indicate or deem to indicate that Taiwan or Tibet is a Country such as ‘ROC’.
All book / magazine with ISBN / ISSN code can’t be imported under the show but through a book trader
agent instead, which will cost additional 12% on CIF value, min. USD 480.00/shipment.
Films/ slides/ video tapes/ CDs, VCDs, DVDs/ USB disk with data or content, map and globe are not allowed to display, distribute & consume during the show due to import license restriction, so please DO NOT send any above items with shipment. APT will not take any responsibility of the shipment detained/delayed due to lack of import license.
In addition, exhibitors are advised that brochures, giveaways and souvenirs are subject to import
duties as assessed by the Chinese Customs which must be payable on entry.
任何宣传资料中若有提到“台湾”或“西藏”之处,展商应避免使用任何使人误会台湾或西藏为国家的文字。
所有含 ISBN 或 ISSN 编码的图书/杂志,无法以展会的名义进口,必须通过外文图书进出口公司做进口,这将
产生额外的贸易费用,为 CIF 价值的 12%,最低收费美元 480.00/票。
请不要发运任何录像带、幻灯片、光盘以及有内容的U盘和地图以及地球仪等,尽管其只是用于展览目的,因
为在中国这些物品需要特殊的进口批文/许可证,并且这些物品在展会期间都不允许展示、派发或消耗。若
展商缺少进口批文/许可证导致货物无法清关,安普特不承担任何责任。
此外,展商需要为有关消耗的资料、赠品或纪念品缴付进口关税,税额由海关估定。
EARLY / LATE ARRIVALS 早到 / 晚到附加费
An early arrival surcharge will be applicable if the shipment arrives before the stipulated deadlines and will bill exhibitor as per outlay plus 10% reimbursement fee. A late arrival surcharge, 30% based on basic handling rate, will be applicable if the shipment arrives after the stipulated deadline. In the event of late arrivals, APT Showfreight will make all reasonable efforts to ensure delivery before the show opens; however, no guarantee can be given. The surcharge will apply regardless of delivery date to the show site. APT Showfreight also reserves the right to reject handling any cargo that arrives at the Shanghai
Page 5 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
seaport / airport only 7 days prior to the show open date. All additional charges incurred due to the late arrivals shall be borne by the exhibitors.
如展品于指定日期之前到达,所有产生的早到附加费,我司将实报实销并加收百分之十垫付费。
如展品于指定日期之后到达,我司将收取基本运输费之百分之三十(30%)的晚到附加费。
对于晚到货,我司会尽全力在展览会开幕之前将展品运至展台,但是不能给予任何承诺。即使不能如期送货至
展台,我司亦需收取晚到附加费。安普特物流有限公司保留拒绝操作在展览开幕前 7 天内到达上海港口/机场的
晚到展品的权利。所有因晚到产生的附加费用由展商承担。
CASE MARKINGS 包装唛头
For easy identification of exhibits, all packages must be marked as follows:
为了方便识别,所有货物外包装上必须印上如下唛头:
TCT ASIA 2020
C/O APT Showfreight Shanghai Co., Ltd.
Name of Exhibitor : _____________________
Stand Number : _____________________
Case Number : _____________________
Gross Weight/Net Weight : _____________________
Dimensions : _____________________
HAND-CARRY EXHIBITS 手提物品
Exhibitors are strongly advised not to hand-carry goods for this exhibition as it could be detained by the Chinese Customs at the airport. Once detained, please note the detained shipment can’t be imported as exhibition goods because the list of exhibits of detained goods were not submitted in advance to the customs system at least one month before show.
我们强烈建议展商不要手提展品进入中国,因有可能导致货物被机场海关扣留。如发生扣货,请注意无法通过
展览品方式再进行进口清关,因为被扣物品的展品清单未提前至少一个月提交给海关系统做备案。
COURIER SERVICE 快递服务 We do not recommend to send it via courier service (DHL, FedEx, UPS) as the cargo might be detained by customs, unless the shipment is very small (under 20kgs total weight) and low value (under USD50 total value). Otherwise airfreight is a better choice. Once courier detained, please note the detained courier shipment can’t be imported as exhibition goods because the list of exhibits of detained goods were not submitted in advance to the customs system at least one month before show. Please contact with us before sent out shipment by courier. If exhibitor insist to send by courier service, the exhibitor should know and take full responsibility for the risk that the cargo might be detained and can’t be delivered in time which is beyond control. Please let us have air waybill copy once available. Please also note that even shipment is not detained by customs, handling charges from free arrival our office upto your booth will still be occurred @ USD153.00 /shipment + duty/tax (as per outlay+10% handling fee). But if shipment is detained by customs, handling charges will be the same as normal airfreight shipment as per tariff. There is courier fee of sending original shipping documents (like OBL, ATA) at USD60.00 per consignment.
我们不建议使用快递服务(例如 DHL, Fedex, UPS),因货物有可能会被海关扣留,除非是非常小(总重低于
20 公斤)且价值极低(总价低于美元 50)的宣传资料等无商业价值的物品。空运将是更好的选择。
Page 6 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
如发生快递扣货,请注意无法通过展览品方式再进行进口清关,因为被扣物品的展品清单未提前至少一个月提
交给海关系统做备案。请在发货之前与我们联系。
如果展商还是执意使用快递服务,请自行承担货物被扣且无法准时送至展台的风险。
货物发出后,请第一时间提供运单。请注意即使货物没有被海关扣留,我司仍要收取送至展台的操作费美元
153.00 /票 (另税金实报实销+10%垫付佣金)。但如果货物被海关扣留,我司的操作费用空运展品相同。
快递正本运输文件(如正本提单或 ATA 单证册等)将收取快递费美元 60.00 每票。
HEAVY AND OVER-SIZE EXHIBITS 超重和超大展品
If exhibitors have heavy and oversize exhibits, exhibitors must be on-site early to direct the operation of uncrating and positioning. If crane of forklift is required for installation of equipment, please send your requirement to us as early as possible so that we could arrange contracting such equipment in advance. A quote will be given after receiving your enquiry.
如果展商有超重和超限展品,务必尽早到现场来进行就位操作。如果需要叉车或吊机来帮助安置设备的
话,务必尽早把要求通知给我们,以便于我们可以提前安排。在接到展商的查讯后我方会提出报价。
VALUABLE / REEFER OR DANGEROUS CARGO 贵重/冷冻冷藏或危险品操作 For valuable (goods value on or exceeding USD1,000.00 per kg gross weight or unit price on or exceeding USD100,000.00 per piece), reefer and dangerous cargo, 100% additional charges will be levied. Exhibitors have to send us a specific form with company letterhead and the completed forms should reach us before shipment dispatched.
如展品中有贵重品(每公斤毛重价值达到或超过一千美元或单件货价格达到或超过十万美元)或冷冻冷藏
品或危险品,将加收 100%附加费。展商须在货物发运前提供用公司信头纸打印的完整声明给安普特。
PACKING OF EXHIBITS 展品包装 Exhibitors shall be responsible for the consequences of improper packing. A. Protection against Damage and Rain As the exhibits are repeatedly loaded and unloaded during transportation, shocking/bumping will sometimes be inevitable. Moreover, exhibits will be placed outdoors many times, including open-air storage at the exhibition centre before and after the exhibition. Therefore, exhibitors must take necessary precautions against damage and rain, since we cannot assume any responsibility for the damage, especially when the return exhibits are to be packed with used-packing materials (the case as well as aluminium foil, plastic covers, etc., very often would have been damaged already during unpacking). B. The Case The case must be strong enough to avoid damage during transportation as well as unpacking, and in particular, be suitable for repacking and for sale for return movement after the exhibition. Packing in cartons is not considered suitable for repeated handling, especially for valuable or delicate equipment. C. Vacuum Packing Service APT can provide Vacuum Packing Service. Please order it to APT at least 2 days before required service.
参展商要对包装不妥善造成的后果承担责任。
A) 避免损坏和雨侵
由于展品在运输中反复被装卸,震动和撞击是不可避免的。此外,展品被多次置于室外,包括展览前后在展览
中心露天的放置,所以展商必须提前注意抵制损坏和雨侵。我们不承担任何损毁责任,尤其是当回程展品可能
被已经使用过的包装材料重新包装的时候(有铝箔、塑料等包装情况下,很多时候在取出过程中已被损坏)。
B) 包装箱
Page 7 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
包装箱必须要坚实到足以避免在运输和开箱时候的损坏,尤其是于展后的回程重装和销售,特别对于贵重和精
密设备来说,硬纸盒包装并不适用于重复运输。
C) 展品真空包装
APT 还可提供展品真空包装服务。请提前至少 2 天下单预约。
FUMIGATION RULES IN CHINA 中国对木质包装要求须知 ALL CARGOS WITH SOLID WOOD PACKING MATERIAL (abbr. as WPM, such as wood block cases, lath cases, pallets, frames, drums, axes, chocks, stow-wood, crossties etc.) to China, fumigation must be arranged in the country of origin before sending the cargo to China. To ensure the WPM is properly treated either by Heat Treatment (HT) or Methyl Bromide (MB), following information MUST be marked or stamped on the outside packing as the below sample: All wooden pallets / crates need INTACT IPPC STAMP ON EACH FOOT / SIDE. WPM without acceptable IPPC stamp or IPPC stamp unclear/ half-printed/ hidden or against the above requirements, the Customs will force to destroy the case with extra penalty before delivery.
所有含木质包装的入境货物(木质包装是指用于承载、包装、铺垫、支撑、加固货物的木质材料,如木板箱、
木条箱、木托盘、木框、木桶、木轴、木楔、垫衬木、枕木等),应当由输出国家或地区政府植物检疫机构认
可的企业按中国确认的检疫除害方法处理。
为保证所有入境货物的木质包装在输出国经过热处理(HT)或溴甲烷(MB)熏蒸,所有木质包装上必须加施
政府植物检疫机构批准的 IPPC 专用标识,如图所示。
所有入境货物的木质外包装必须清晰完整加施在木箱或者木托盘的每一个底脚或每一面上。若无有效的熏蒸标
识,或标识不清/不全/被遮挡,包装箱将被中国海关就地销毁并对参展商处以罚金。
MOVE-IN DAYS 进馆 Exhibits will be transferred to the exhibition venue during the move-in days. Representatives of APT Showfreight will be available to help the exhibitors with the move-in logistics including assistance exhibitors of unpacking wooden cases and storage of empties as applicable. However, a responsible representative of the exhibitor must be available on-site during the move-in period for supervision. In some circumstances, however, the customs at the ports or fair site may inspect the case without your presence.
一般展品会于进馆期间送展场,我们会协助展商拆木箱并将展品就位和暂存空箱于展览场地(如场地许可)。
在布展期间,请参展商务必在现场指导操作。有些情况下,港口或者展场的海关会在展商不在时查验货品。
MOVE-OUT DAYS 出馆
Prior to the move-out days, exhibitors will be given a 'Return Shipping Instructions' to fill in based on the List
of Exhibits given at time of entry of goods into China. Exhibitors are required to advise APT Showfreight if the
goods will be re-exported, or disposed, as applicable.
During move-out, APT Showfreight representatives will be on-site to help exhibitors with return of empty cases, assistance of repacking wooden cases, re-export etc. as applicable. In order to ensure the closing of the exhibition can be operated smoothly, those exhibitors having heavy and over-size exhibits may be required to repack exhibits on the next day. Our on-site operation staff will inform exhibitors the exact arrangements. Similarly, during exhibition closing, exhibitors must also supervise the dismantling and repacking of exhibits,
Page 8 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
especially for delicate or heavy equipment. When used-packing materials repack exhibits, the packing is regarded as no longer suitable to protect the equipment against damage/moisture compared with the original. Exhibitors shall therefor bear the responsibility for the consequences arising therefrom.
In the event of non-compliance of return instructions, all goods left at the exhibition venue shall be subject to
disposal by the Chinese Customs and all charges relating to the disposal including duties and taxes if any,
shall be borne by the exhibitor.
Exhibitors must pay special attention to the following Customs' regulations:
- Items other than those declared exhibits (e.g. personal effects, souvenir bought in China) are absolutely
not allowed to be returned together with exhibits.
- Violations of these regulations will result in confiscation and heavy fines imposed by the Customs.
- Battery, powder, toner or ink cartridge, liquid and gel are controlled dangerous cargo by
airline. Please note the exhibitors should take full responsibility to remove above controlled
items before re-packing.
- As the airlines implement strict security rules and will ask for magnetism detection & protection for many
sensitive items by air transportation including electric equipment, computer, speaker and etc., we will bill
magnetism inspection fee if the detection and protection is incurred.
在展览闭幕前,我司会派发一份 “回运指示” 给各展商,展商需根据原有的展品清单向我司阐明展品的处理方
式,如回运、消耗或散发等,以便我们在展览结束后安排展品的回运。
在展览会闭幕的当天,我们会将空包装箱送还各展台并协助展商装回木箱。为了确保展会闭幕的顺利进行,持
有超重或者超限展品的展商可能要在隔天完成展品的重装。我们的现场操作人员会通知展商确切的安排。展览
会闭幕期间,参展商需现场督导我们进行展品的拆卸和重装,尤其是对大型或者精密设备。当用已使用过的材
料重新包装展品时,很难确保设备不受损坏和潮气影响。参展商由此须自行承担责任。
如未收到展商回运指示,我们会将遗留于展场的展品交由海关处理,所有费用如销毁费及关税等由展商承担。
参展商需特别注意以下海关规则:
- 除了已申报的内容,其他货品如个人物品或在中国境内购买的纪念品,不能够随展品一同回运。
- 违反以上规则的货品将会被充公或从处重罚。
- 电池、粉末、墨盒、液体和凝胶都属于航空公司严格管制物品。请注意展商需承担全部责任并务必在
撤展重新包装时将以上管制物品取出不要打包随货运输。
- 由于航空公司现在施行了更加严格的安检规定并针对航空运输中的很多安全敏感物品如电器、电脑、扬声
器等要求磁性检验及消磁处理,如发生以上检验及处理我司将按实报实销向展商收取。
RE-EXPORT回运 The re-export formality takes at least 2 weeks prior to shipment departure from China. If any exhibits need to be return urgently, please write to APT Showfreight of your request before show open. Please pay attention that the new customs system requires one temporary import shipment should return all items together as one shipment and no separate / partial return as different shipments or to different destinations can be handled after show close.
货物回运前的复出口海关手续至少需要 2 个星期的时间。如有任何急需回运的展品,请务必事先通知我司,并
于展览会开幕前将所有指示和文件交给我司。
请注意新的展览品通关系统要求按照一票运单下临时进口的展品必须全部作为一票回运,无法操作一票进口运
单下的展品分开作为不同运单回运或者部分展品回运至不同目的地。
HIRE OF LABOUR OR EQUIPMENT ETC 雇佣工人及设备 If additional labour or equipment required, please contact us for quotation at least 48 hours before move-in.
请提前 48 小时通知我司非正常工作时段内雇用工人或设备的需求,我司将另行报价。
Page 9 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
INSURANCE 保险 It is the responsibility of each exhibitor to arrange Marine (Transport) Insurance covering transport to the exhibition, during the exhibition, till the return of the exhibits to domicile/ exhibits sold locally, including the period the exhibits are handled by APT Showfreight. Our tariff is computed on the basis of volume, weight and has no correlation with the value of exhibits which means the cost of insurance cover is not included in our charges. If exhibition goods were damaged by APT’s responsibility but no insurance covering the exhibition goods, APT Showfreight can pay for claim at maximum three times of handling fee for the exhibits.
展商需自行投保,保险范围需要涵盖展品从始发地发运到目的地,展会期间保险,直至展品送回到发运地或者
展品在当地售卖后的收货点,包括展品在安普特物流公司操作期间的保险。由于我司的报价是根据货物的体积
或重量计费的,与货物价值无关,因此不包括保险费用。如展品在运输过程中由于我司责任造成损伤,如无保
险,我司只能按照行业规定在该受损物品的运输费 3 倍比例以内予以赔付。
ADDITIONAL SERVICES 其他服务 For additional services not listed above, an individual quotation will be given upon receipt of requirements.
如有任何上述未有提及之收费,我司将再另行报价。
TERMS OF PAYMENT 支付条款 Inward : Upon uplift of goods / prior to delivery to stand. Outward : Upon presentation of invoice / prior to begin re-export.
All payments must be made without any deduction or deferment on account of any claim, counterclaim or offset. Remitting bank charges are to be borne by the exhibitor. Payment can be made by Bank Draft or Telegraphic Transfer to our account. Details of our bank account: Beneficiary Bank Name: HSBC Hong Kong Beneficiary Bank Code: 004 SWIFT Address: HSBCHKHHHKH Account Number: 813-221496-838 Account Name: APT SHOWFREIGHT LIMITED Bank Address: NO 1, QUEEN’S ROAD CENTRAL, Hong Kong
来程费用 : 提交账单之后,送货上展台之前。
回程费用 : 提交账单之后,货物安排退运之前。
所有费用不得因任何索赔,反索赔或补偿而减除或延期支付。银行汇款手续费用由展商自付。
展商可通过银行汇票或电汇至如上我公司账号:
收款行名称: HSBC Hong Kong
收款行编号: 004
SWIFT 地址: HSBCHKHHHKH
收款人帐号: 813-221496-838
收款人名称: APT SHOWFREIGHT LIMITED
银行地址: NO 1, QUEEN’S ROAD CENTRAL, Hong Kong
TERMS AND CONDITIONS 公司条款 APT Showfreight does not take any responsibility for:
a) Exhibits which are not allowed by the organizer or Chinese Customs to be sold or displayed at the fairground.
b) Any tax/duty for sold exhibits c) Loss of goods whilst on display at the venue
Page 10 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
All business is only transacted in accordance with our Standard Trading Conditions. Copy is available upon request. Use of APT Showfreight’s services – be it partly or in full – and any requirement for additional services at any time before, during or after the exhibition express orally and/or in writing and/or by conduct, implies
acknowledgement and acceptance of the General Trading Conditions, terms, quotation and charges.
上海安普特物流有限公司不会负责:
a) 任何被主办单位或中国海关拒绝于展览会售卖或陈列之展品
b) 任何展品售卖之税项
c) 任何于展会期间失窃的展品
所有业务根据我们的“标准贸易条款”执行,全文供索取。
展商认可:凡在展会前、展会期间和展会后的任何时间,无论全部或部分使用我公司的服务以及提出额外的服
务要求,无论是口头或书面指示,均表明承认及接受上述全部条款及同意我司的报价。
Page 11 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
INWARD / OUTWARD HANDLING TARIFF FOR SEA-FREIGHT
海运展品运输费率(进/ 出馆) From free arrival Port of Shanghai to exhibition booth or vice versa, services include: customs clearance and handling at port, transport from port to exhibition booth or vice versa, handling of empty cases, un-packing/ re-packing wooden cases, positioning etc. on-site handling services.
由上海港至展馆,服务包括清关、运输送展台、暂存空箱、拆木箱和重装箱、就位等现场操作,反之亦然。
1. Consignment service charge
基本服务费
……… USD60.00 per consignment per exhibitor
美元 60.00 /参展商/票货
2. Basic handling charge
基本运输费
……… USD60.00 per cbm or 1,000 kg, whichever is the greater
美元 60.00 /立方米或 1,000 公斤,以两者之最大值计算
a) Min. Charge for LCL
拼箱最低收费
……… USD60.00 /consignment (HBL) /exhibitor
美元 60.00 /参展商 /票货
b) Min. Charge for FCL
整箱最低收费
……… 23 cbm /20’ GP; 25 cbm /20’ OT/FR; 46 cbm /40’GP; 50 cbm /40’ HC/OT/FR
3. Terminal handling charge*
码头服务费*
……… USD38.00 per cbm or 1,000 kg, whichever is the greater
美元 38.00 /立方米或 1,000 公斤,以两者之最大值计算
a) Min. Charge for LCL
拼箱最低收费
……… USD110.00.00 /consignment (HBL) /exhibitor
美元 110.00 /参展商 /票货
b) FCL terminal charge*
整箱码头服务费
……… USD330.00 /20’; USD485.00 /40’
美元 330.00 /20 英尺集装箱;美元 485.00 /40 英尺集装箱
*Current and actual cost levied by Container Freight Stations (CFS), all third parties’ charges incurred will be
charged at cost. 集装箱堆场或其它环节所产生的额外费用,包括换单费用以实报实销向展商收取。
4. Container haulage to / from CFS 空集装箱拖回码头/由码头提取空集装箱
20’ container
20 英尺集装箱
……… USD380.00 /20’
美元 380.00 /20 英尺集装箱
40’ container
40 英尺集装箱
……… USD650.00 /40’
美元 650.00 /40 英尺集装箱
5. Terminal agency fee
码头代理费
……… USD130.00 /consignment
美元 130.00 /票
6. Additional charge for shipment being shipped/departure to/from Yang Shan port
海运货发至/启运洋山港附加收费
LCL:
海运拼箱
……… USD6.50 per cbm or 1,000 kg whichever is the greater, Min
USD125.00 per consignment (HBL) per exhibitor
美元6.50 /立方米或1,000 公斤,以两者之最大值计算,最低收费美
元125.00 /参展商 /票货
FCL:
海运整箱
……… USD225.00 per 20’ GP container; USD375.00 per 40’ GP
美元 225.00/20 英尺集装箱;美元 375.00/40 英尺集装箱
Page 12 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
INWARD / OUTWARD HANDLING TARIFF FOR AIR-FREIGHT
空运展品运输费率(进 / 出馆)
From free arrival Shanghai Pudong Int’l Airport to exhibition booth or vice versa, services include: customs clearance and handling at airport, transport from port to exhibition booth or vice versa, handling of empty cases, un-packing/ re-packing, positioning etc. on-site handling services.
由上海机场至展馆,服务包括清关、运输送展台、暂存空箱、拆木箱和重装箱、就位等现场操作,反之亦然。
1. Consignment service charge
基本服务费
……… USD60.00 per consignment per exhibitor
美元 60.00 /参展商/票货
2. Basic handling rate
基本运输费
……… USD0.78 per kg based on actual or volumetric weight, whichever is the greater, min. USD78.00 per consignment (HAWB) per exhibitor
美元 0.78 /公斤, 以实际或体积重量,以两者之最大值计算,
最低收费美元 78.00 /参展商 /票货
3.
Airport terminal charge*
机场服务费*
………
USD0.50 per kg based on actual or volumetric weight, whichever is the greater, min. USD100.00 per consignment (HAWB) per exhibitor
美元 0.50 /公斤,以实际或体积重量,以两者之最大值计算,
最低收费美元 100.00 /参展商 /票货
4. AWB agency fee
抽单代理费
……… USD130.00 /consignment
美元 130.00 /票
* Current and actual cost levied by Airport, all third party’s charges not listed above will be charged at cost. 机场或其它环节所产生的额外费用,以实报实销向展商收取。
IMPORTANT NOTICE 注意事项: 1. The above rates (for both seafreight and airfreight) exclude stand dressing, assembly of display panels or machinery or decoration of any kind. If these special services are required, it will be subject to a mutual agreement with the exhibitor and additional charges will be levied. 2. Each AIR shipment should be under one Master AWB with one back to back House AWB and the HAWB must be manifested by airline. All shipments not following our shipping instructions will incur additional agency fees USD124.00 /consignment (HBL) /exhibitor. 3. For all consolidation, a Consolidation Cargo Manifest must also be provided. 4. For ATA carnet shipment, it’s a “MUST” to have ATA Carnet number on MAWB and B/L.
1. 以上海运及空运之运输费率并不包括展台装饰及机械接驳等,如需特别要求,双方需另签协议,我司会
另加收费。
2. 每票空运均须出具总运单及分运单并且分运单须录入航空公司舱单。若因收货人资料错误而产生额外
费用美元124.00/参展商 /票货。
3. 若展品以合并形式发运,不论是海运或空运,展商或其运输代理必须提供载货单。
4. 对于ATA单证册的货物,必须在空运或海运的运单上显示ATA的号码。
ON-SITE HANDLING SERVICES 现场操作服务费 On-site handling services include delivery of exhibits from free arrival fairground upto booth or vice versa, unpacking, repacking, positioning and/or handling of empty cases during the show period.
现场服务包含:展馆卸货区送至展台、拆木箱及重装箱、就位及展会期间暂存空箱,反之亦然。
Handling Rate
操作费
……… USD30.00 per cbm or 1,000 kg, whichever is the greater, min. USD30.00 per consignment per exhibitor
美元30.00 /立方米或每1000公斤,以两者之最大值计算,最低收费美
元30.00/参展商/票货
**On-site handling charge is subject to 6% VAT. 现场服务费用加收 6%增值税。
Page 13 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
EDI CUSTOMS DATA ENTRY FEE 海关系统录入费 EDI Data Entry fee
海关系统录入费
……… USD8.00 per page, min. USD35.00/consignment/exhibitor
美元 8.00 /页,最低收费美元 35.00 /参展商 /票货
QUARANTINE CHARGES 检验检疫费 Volume of package under 3 cbm-each
每件体积少于 3 立方米
……… USD5.50 per package, min. USD40.00 per consignment per exhibitor
美元 5.50 / 件,最低收费美元 40.00/参展商 /票货
Volume of package above 3 cbm-each
每件体积大于 3 立方米
……… USD5.00 per package, min. USD40.00 per consignment per exhibitor
美元 5.00 / 件,最低收费美元 40.00/参展商 /票货
FCL
整箱
……… USD110.00 per 20’ container; USD215.00 per 40’ container
美元 110.00 / 20 英尺集装箱;美元 215.00 / 40 英尺集装箱
Other charges such as fumigation, sanitary treatment will be billed as per outlay. All battery, powder, liquid and gel are controlled dangerous items by airline, please take out these items during re-pack. Otherwise, the whole shipment will be detained by airport security office.
其它费用如熏蒸或卫生处理,我司将按实报实销向展商收取。
电池、粉末、液体和凝胶都属于航空公司管制危险物品,请在撤馆重新包装物品时将以上电池等管制物品取
出,否则展品在机场安检扫描时会被扣留并受处罚。
CUSTOMS BOND HANDLING FEE 海关监管费 If customs bond is arranged by APT on behalf of the exhibitor as per exhibitor’s written request for temporary import, a customs bond handling fee is applicable to exhibitor at 1.0% of CIF value for 1 month, min. USD125.00 / month / consignment / exhibitor.
所有临时性进口的展品,从进口日起至展品离开中国或完成留购手续,需缴纳 1.0%到岸价/月的海关监管
费,最低收费美元 125.00/月/参展商/票货。
STORAGE IN SHANGHAI PORTS AFTER ARRIVAL OR BEFORE RETURN
A storage fee will be applicable after 3 days’ free storage upon arrival till first move-in day and after 3 days free storage after show close till re-export departure as follows:
所有海外货物将根据海关相关规定被收取监管仓库费用,进馆由货物抵达上海后 3 日起到进馆首日,出馆
由展馆结束后三天到货物离开上海口岸。
Sea Cargo
Air Cargo
………
………
USD2.00/cbm /day (Min. USD 20.00) USD0.1/kg/day ((Min. USD 20.00)
ATA CARNET HANDLING FEE 单证册签注费 If ATA Carnet is used for temporary import, an ATA Carnet handling fee is applicable to exhibitor at USD115.00 per Carnet per entry or exit endorsement.
Page 14 TCT Asia 2020 • 8 - 10 JULY 2020 • SNIEC SHANGHAI • CHINA
Please note that the individual MAWB or B/L must be issued for cargo which is sent under ATA Carnet. Kindly consult APT Showfreight for the detailed consignment instruction for issuing the individual MAWB or B/L.
如用 ATA 单证册作临时进口,ATA 单证册加签费为美元 115.00 / ATA 单证册 / 次加签。
如用 ATA 单证册作临时进口,所有货物必须使用单独的 MAWB 或 B/L 发送。请在货物发运前咨询安普特物
流, 如何在 ATA Carnet 上显示正确的信息以及提单,运单上的收货人指示。授权委托书必须与 ATA 单证册
一起提交并且有 ATA 持证人签字。
VALUABLE OR DANGEROUS CARGO 贵重或危险品操作 Exhibitors have to send us a specific form with company letterhead for valuable (unit price exceeding USD100,000.00 per piece) and dangerous cargo. The completed forms should reach us before shipment dispatched, relevant charges will be quoted upon request.
如展品中有贵重(单价 100,000.00 美元以上)或危险品,展商须提前提供用公司信头纸打印的表格声
明。展商请将填写完整的表格在货物发运前回传,我司将再另行报价。
HALL MANAGEMENT FEE FOR ALL SHIPMENTS 展馆管理费
Hall Management Fee
展馆管理费
……… USD5.00 per cbm or 1,000 kg, whichever is the greater, min. USD5.00 per consignment per exhibitor
MAGNETISM INSPECTION FEE OF AIR FREIGHT 空运磁检费 As the airlines implement strict security rules and will ask for magnetism detection & protection for many sensitive items by air transportation including electric equipment, computer, speaker and etc., we will bill magnetism inspection fee if the detection and protection is incurred.
由于航空公司现在施行了更加严格的安检规定并针对航空运输中的很多安全敏感物品如电器、电脑、扬声器等
要求磁性检验及消磁处理,如发生以上检验及处理我司将按实报实销向展商收取。
Magnetism inspection fee
磁检费
……… USD0.50 per kg based on actual or volumetric weight, whichever is the greater, min. USD145.00 per consignment per exhibitor
美元 0.50 /公斤, 以实际或体积重量,以两者之最大值计算,最低收费美元
145.00 /参展商 /票货
Battery, powder, toner or ink cartridge, liquid and gel products are controlled dangerous item by airline. If exhibitors cannot provide certificate for safe transport of chemical goods, please take out batteries, powder, toner or ink cartridge, liquid and gel products before re-pack. Otherwise, the whole shipment will be detained by airport security office.
电池、粉末、液体和凝胶都属于航空公司管制物品,若展商无法提供适合空运的化工鉴定,请在撤馆重新包装
物品时将以上电池等管制物品取出。否则展品将会在机场安检扫描时被扣留并接受安检处罚。
REMARKS 备注 Above rates exclude: insurance coverage, any additional services not listed above, Customs and CIQ
inspection fee, overtime storage due in pier, airport terminal / Freight Forwarder’s warehouse, seaport/airport storage charges and removal charges due to late receipt of negotiable shipping documents, container grounding / lifting at show site, container storage at show site, any duty / tax payable to the Chinese government and endorsement of relevant government departments, which will be charged at cost plus 10% reimbursement fee.
上述报价不包括:保险、任何上述未有提及的服务需求、海关和检验检疫局的查验费、由于展商提交运输文件
不及时所造成的在码头、机场货站/代理仓库的超时仓储费,疏港费、现场集装箱落箱/上车费、现场集装箱堆存
费、需付给中国政府的关税和有关政府部门的背书/加签费用。以上费用将按实际产生收取并加收10%代垫费。
TCT ASIA 2020
Section 7-Exhibitor Responsibilities& Liabilities
Amendments / General Supervision
Any exhibition items which are or not covered in this manual are reserved by TCT Asia
Management. The Management has the right to amend the exhibition rules when it’s necessary.
Then amended rules have the same right to all the related parties. TCT Asia Management will
inform the exhibitors which will be affected in written form.
TCT Asia management reserves the right to reject, or prohibit any exhibit, whole or in part, or any
exhibitor and his representatives, based solely on its judgment, discretion, and authority. Please
refer to your TCT Asia exhibit space application / contract for additional rules and regulations.
Violations and Penalties
Please read the TCT Asia 2020 Exhibitor Manual carefully, and follow all the rules. When the
exhibitor arrives at the venue, you can contact with VNU.
If the exhibitors, their employees, or agents, violate the rule many times, the show management
has the right to forfeit the exhibitor’s participation, occupy the booth and deduct the booth charge.
If the exhibitors want to apply for the standard booth onsite, please contact with the show
management office.
Default in Occupancy
Any exhibitor failing to occupy contracted space is not relieved of the payment of the full rental of
such space. All display systems and equipment/products must be installed and complete prior
to21:00 7/7/2020. Unoccupied space may be repossessed by Exhibition Management for such
purpose as it may see fit. Failure to notify TCT Asia Management of cancellation in advance will
cause exhibitor to lose priority for exhibit space.
Exhibitor Liability
The Exhibitor assumes full financial liability for damage to the facility or neighboring exhibits
caused by the construction of the exhibitor’s booth structure. The Exhibitor may not apply paint,
lacquer, adhesives or other coating to building columns, walls or floors.
In the event any part of the exhibit hall is destroyed or damaged so as to prevent TCT Asia from
permitting an Exhibitor to occupy assigned space during any part or the whole exhibition period;
or in the event where occupation of assigned space during any part or the whole exhibition
period is prevented by strike, acts of nature, national emergency, or other cause beyond the
control of TCT Asia Management Office; the Exhibitor hereby waives any claim against TCT Asia
Management Office beyond a refund of rent paid for the period it was prevented from using the
space, less a proportionate share of the exposition expenses incurred by TCT Asia.
TCT ASIA 2020
Section 7-Exhibitor Responsibilities& Liabilities
In addition to the Rules and Regulations listed on the back of the exhibit space
application/contract, the TCT Asia rules and regulations have been established in consideration
of all participants (Exhibitors, attendees, service contractors, building management, and Show
Management) and apply to all participants throughout the show.
Limitation of Liability / Insurance
TCT Asia would like to remind the Exhibitor of the limits of liability as agreed to on the back of the
original signed application/contract for exhibit space.
Badges
Exhibitor Badge
1. All representatives of the exhibiting company (including Exhibitor Appointed Contractors) must
wear the official TCT Asia badges at all times. Any person(s) on the exhibit floor not wearing a
badge may be promptly evicted from the exhibit floor. Badges can be requested and picked
up at the registration counters during the move-in, show and move-out hours indicated in
Section 1 General Information.
2. For security reasons, each exhibiting company is allotted a limited number of badges. Due to
the epidemic prevention and control, all exhibitors are required to apply for the Permit
of Construction in advance for their entrance to the exhibition halls during the period
of move-in.
3. Company employees who WILL NOT be working in the booth should register as a “Visitor”
online.
4. Guests invited by the exhibitor are required to have a visitor badge. Exhibitors should not
request exhibitor badges for the guests. Exhibitors and guests shall finish the online
Pre-Registration and Real-Name Authentication within the required date. For Detailed
information, please visit www.tctasia.com.cn
5. Exhibitor badges are not to be issued to representatives of leasing companies, financial
institutions, publishers, suppliers, vendors or others who wish to gain admittance for the
purpose of making contact other than in your exhibit.
6. Those receiving certification for a badge are to be in the space rented while on the exhibit
floor and are not admitted for the purpose of viewing other exhibits, except by invitation of
other Exhibitors to visit their booths. The exhibiting company, its employees, agent and
anyone claiming a right to be on the exhibit floor through the Exhibitor, waives any right or
claims for damages arising out of the enforcement of this rule.
7. Badges are not to be defaced or altered by inserting company cards.
8. False identification as an Exhibitor’s representative, misuse of Exhibitor’s badges, or any
other method or device used to assist unauthorized personnel to gain admittance to the
TCT ASIA 2020
Section 7-Exhibitor Responsibilities& Liabilities
exhibit floor is prohibited. It will result in removing the Exhibitor and his representatives from
the exhibit floor and/or banning them from future entrance on the exhibit floor without
obligation on the part of organizer for refunds of any fees.
9. Any person on the exhibit floor who is not officially registered or who assists non-registered
persons to gain access to the exhibit floor is in violation of the items specified in this manual
and may be promptly evicted from the exposition.
Set-up/ Dismantle Badge
1. Set-up/Dismantle badges are only for exhibiting company personnel and contractors. Usually
this would be equipment technicians, exhibit set-up and dismantle personnel or Exhibitor
Appointed Contractors whose presence is required during the set-up or dismantling of exhibit
equipment.
2. Set-up/dismantle badges are valid only during set-up and dismantling hours of the show and
invalid during show days.
3. More information about construction staff’s licensing process, please go to the third chapter, "
Raw Space Construction Guide"
Demonstrations and Presentations
In the event of justifiable complaints from other exhibitors, the organizer reserves the right to
determine the acceptable sound level and extent of demonstrations. Any promotional activity
involving the demonstration of games, organized competitions or quizzers requires a permit from
the organizer. Any films, videocassettes or slides to be shown to the public during the exhibition
must be prior-approved by the authorities concerned. Exhibitors may appoint the official freight
forwarder to arrange approval on their behalf.
Use on Booth
1. Booth must always be taken care of during the show. Exhibitors’ staff members must be
present in their booths at least 30 minutes before the show opening hours and leave within 30
minutes after the closing time. All exhibitors should be responsible for their staff, agent and
representatives.
2. Exhibits and goods are not allowed to be sold at any place by exhibitors and staff members in
the pavilion.
3. Organizers have the right to prohibit exhibitor activities which considered that is harmful to the
others, for example, the audio and video equipment is not appropriate, and the volume is too
high.
TCT ASIA 2020
Section 7-Exhibitor Responsibilities& Liabilities
4. All the special materials shall be permitted by organizer before bringing into the exhibition hall.
The organizers will take following aspects into consideration, such as weight, ground bearing
and dimensions.
5. The floor load-bearing capacity of indoor exhibition space is 3 tons/㎡. If there is any vertically
vibrating part in the exhibit operation, the above-mentioned floor load-bearing capacity shall
be reduced at least by 50%. Exhibitors should pay full compensation for the damage to the
buildings or the pavilion at the weight of the goods. The exhibitors will have to contact the
organizer in advance when the weight of the exhibition is being held.
6. All machines for demonstration must be equipped with safety devices and running signs,
which may be removed only when the machines are disconnected from power without any
latent danger. Working machines must be placed at a relatively safe distance from visitors,
and safety operation device is needed. Any machine or apparatus can only be demonstrated
in the booth, and operated and supervised by qualified persons. No motors, engines or power
driven machines are to be used without adequate fire-protection measures taken by Party B.
If there is a need to demonstrate machine equipment, please provide a detailed written
instruction about the operation of the organizer. Exhibitors must be fully prepared to ensure
the safety of other exhibitors, audience, exhibition hall and the organizer.
7. To build the layout of the exhibition booth must be completed before the opening of the
exhibition; in the exhibition period, to carry, repair or exchange of goods, or additional
materials must be approved by the organizers.
8. Any overseas exhibits cannot be moved out of the exhibition hall before the closing of the
exhibition.
Obstruction of Aisles/Booth Demonstrations
Exhibitors may not conduct demonstrations or activities that result in excessive obstruction of
aisles or prevent ready access to neighboring exhibitors’ booths. Demonstrations are to be
straightforward, professional, and relative to the displayed product. The use of demonstrators,
gimmicks, mimes, magicians, robots, etc., in the aisles is prohibited at all times. Products or
demonstrations must be placed inside the booth boundaries and must not result in aisles being
blocked. Equipment / furniture may not be in the aisle at any time.
Distribution of Promotional Material/Displays
Exhibitors must remain within their own exhibit space when distributing literature, product
samples, or other materials. Company information dissemination or promotion in any way is
strictly forbidden at show entrances, registration areas, seminar rooms, or public areas within the
convention facility or official hotels, which includes hotel room drops. Any flyers, brochures, signs,
TCT ASIA 2020
Section 7-Exhibitor Responsibilities& Liabilities
etc. found in any location other than the exhibiting company's display space will be removed by
show management. The only exceptions will be for official event sponsors, at the discretion of
show management.
Displays must be confined within the exhibitor’s booth and must not be designed to obstruct the
clear view of nearby booths or interfere with the flow of traffic example: video monitor(s) should
be places where visitors viewing the monitor(s) do not block the aisle.
Giveaways/Handouts
Items, samples, souvenirs, etc., may only be distributed by the exhibitor from within the confines
of the exhibitor’s booth. Show Management reserves the right to evaluate the safety and/or
offensiveness of novelty item handouts. Failure to comply may result in the loss of priority points
or approval to exhibit the following year.
Booth Receptions/Parties
Receptions / parties within your booth must be requested in writing and approved by TCT Asia
Management prior to the exposition.
Lighting
Please avoid excessive lighting design; strictly prohibit the use of devices that may cause
interference, such as rotating lights or flashes. All lighting effects (including neon lights) must be
restricted in your own booth. Potentially damaging light, such as laser or UV, must be subjected
to the terms of use and approved by the organizer.
Security
1. General security in the exhibition hall will be provided by the organizer. Exhibitors and their
staff will not be allowed in the exhibition hall after official hours.
2. All personnel in the exhibition halls must wear identification badges. Exhibitors’ passes and
temporary passes are available from the organizer’s office on-site.
3. If your displays are valuable or sensitive and you wish to hire security personnel to attend to
your stand exclusively for the exhibition, please contact the organizer for security services.
Please note that you may not use your own staff, or personnel from any other security agency.
4. Exhibitors’ staff members must be present in their booths at least 30 minutes before the show
opening hours and leave within 30 minutes after the closing time.
5. For security and safety reasons, exhibit movement in or out of the halls during show hours is
not permitted.
TCT ASIA 2020
Section 7-Exhibitor Responsibilities& Liabilities
6. Kindly reminding: All the small, portable and valuable things are easy to miss after the show
daily close. Since the exhibition booth is open, the exhibitors should take responsible for your
own property. Any exhibitors’, constructors’ or visitors’ staff is stolen, lost or damaged, the
organizer will not take any responsible.
7. General security in the exhibition hall will be provided. Exhibitors and their staff will not be
allowed in the exhibition hall after official hours.
8. Report thefts or damages immediately to both Security and Show Management if found.
Venue Police Information:
Location: Glass house (East of W4, near inside square) Tel: +86 21 2890 6110
The exhibitor should complete the statement to the relevant officer. If the exhibitor wants to
check the video, please ask the police to write the alarm list. The venue property office will give
the video checking permit after receiving the alarm list.
Venue Property Office Information:
Location: 2F, E6 Tel: +86 21 2892 8580
The exhibitor can check the video with the checking permit to1F, E6 Hall, the Control Room.
According to Shanghai City Carriage Regulations, the head of Control Room can check the video,
and inform the results to the exhibitor. Exhibitors should cooperate.
TCT ASIA 2020
Section 8 Rules and Regulations
Admission
This exhibition is open to professionals, trade and business visitors only. Minors and members of
the general public will not be admitted. The organizer reserves the right to refuse admission or to
remove any person for any reason. Due to epidemic prevention and control, during the
period of move-in, exhibitors are required to apply for the Permit of Construction in
advance for the purpose of entering exhibition halls. Visitor Pass is required for the
entrance to exhibition halls during the period of exhibition. Visitors under 18 years old are
not allowed to enter the exhibition halls.Animals will not be allowed in the exhibit hall or on
exposition grounds except for guide dogs for the disabled.
Action inconvenience Visitors
All action inconvenience people must be given the same opportunities as able-bodied persons.
This includes the ability to attend exhibitions and look at any of the exhibits. We would ask that
you ensure that your booth and exhibits are easily accessible to those disabled visitors with
wheelchairs. Any booth with a platform should provide an appropriate access ramp.
Registration Procedures
TCT Asia 2020 registration is free open to all qualified visitors. All visitors of TCT Asia 2020 are
required to login to www.tctasia.com.cn for Pre-Registration and Real- Name
Authentication.
Safety Inspection System
According to safety regulation by SNIEC, the safety inspection system will be installed at the each
Entrance Hall.
All exhibitors & visitors are required to walk through before you are entering to the lobby and
exhibition halls during the whole show period. During show days all visitors are allowed to enter
the registration lobby from 9:00a.m., it will be a peak time to be in the queue for the safety
inspection. To secure your arrival your booth before show open at 9:00a.m., we strongly suggest
all exhibitors to enter into the Hall around 8:30a.m. during show days.
TCT ASIA 2020
Section 8 Rules and Regulations
( Please subject to any updated regulations issued by the local government regarding
epidemic prevention and control.)
Promotion during the Show
Exhibitors are asked not to place stickers, signs or posters anywhere in the halls other than within
their own stands and on paid advertising poster sites and billboards. Likewise, exhibitors'
representatives may not distribute brochures, invitations, etc. along the gangways nor near the
entrances/exits. This is unfair to other exhibitors and an inconvenience to visitors. Balloons /
blimps of any kind will not be allowed on-site.
Cameras/Photography/Videotaping/Recording
Photography, videotaping of exhibits and displayed equipment (other than your own) are strictly
prohibited. Audio / tape recordings within the exhibit hall or meeting rooms are prohibited. Show
Management is exempt from this rule. Press (properly accredited) may photograph or videotape
with exhibitor’s permission during exhibit hours only. Videotaping of your product outside of
exhibit hours must be approved in writing by TCT Asia. Written requests for videotaping must be
submitted to Show Management prior to the exposition. The exhibitor must hire a security guard
to be present during videotaping before or after exhibit hours.
Sound and Noise
To ensure a business conductive atmosphere within the exhibition halls, the use of acoustic
speakers on any booth is forbidden. Volume control must be under 70 decibels in the Exhibition
hall at any time. If the volume exceeds 70 decibels, the organizers reserves the right to demand
that the exhibitor lower down the volume, and to take further action such as cutting off electricity
supply to the booth if the exhibitor refuses to comply. In case of violation of this rule, the
construction deposit fee will not be refunded to the exhibitor.
TCT ASIA 2020
Section 8 Rules and Regulations
Prize Drawings/Raffles
Public drawings can only be conducted if held within the confines of the booth. Due to fire safety
regulations, public aisles cannot be blocked. It is recommended that instead of a public drawing
(announcement) that you post the winner’s name within your booth.
Soliciting Exhibitors
Solicitation of Exhibitors is prohibited and could result in removal from the exhibition hall.
Smoking Policy
Smoking is prohibited throughout the exhibit hall and conference room at any time.
Alcohol
Alcohol is prohibited in the facility during set-up and dismantling for safety and insurance reasons.
Stand Cleaning
During the exhibition, the organizer will provide general cleaning of the exhibition hall (excluding
exhibitor’s booth) prior to the opening hours. It is the responsibility of the appointed stand-fitting
contractor to clean the exhibitor’s stand. The official stand-fitting contractor will be responsible for
the cleaning of organizer’s walk-on package booths. During the build-up and tear-down periods,
independent contractors appointed by exhibitors are responsible for the removal of their own
stand building/dismantling materials and rubbish.
Cleaning deposit:
Below 50sqm: RMB 5,000/Booth/Show,
50-100sqm: RMB 10,000/Booth/Show,
101 - 200sqm: RMB 20,000/Booth/Show,
201 - 350sqm: RMB 30,000/Booth/Show
TCT ASIA 2020
Section 8 Rules and Regulations
Over 350sqm: Calculated by area
Hazardous Materials
Unless approved by Organizer and the relevant authorities in writing, no open fire or combustible
gas is allowed to be used in the Centre, and no explosive, petrol and highly flammable toxic or
corrosive substance are allowed to be used in the hall. Radioactive substances shall not be
brought into the Centre.
No more than one (1) day’s supply of any solid or liquid hazardous material shall be stored within
the Leased Area or stands at any time, and the remainder should be stored in special containers
and sealed in a location confirmed by the government departments, SNIEC and Organizer.
Toxic wastes must be sealed in suitable containers with clear markings, and must be handled
according to the relevant government rules governing waste disposal.
No smoking is allowed in Leased Area and anywhere in the Centre with non-smoking signs
Fire Protection Measures/Fireproofing
All materials used in the construction and decoration of an exhibit must be flame retardant. All
carpeting and floor coverings must have Class A flame spread rating and UL between 0 and 25.
No storage of flammable materials is allowed in the utility areas.
Written approval must be obtained from the Shanghai Fire Safety Bureau for the following:
1) Display and operation of any heater, barbecue, heat producing or open flame devices, candles,
lanterns, torches, welding equipment or other smoke emitting materials as part of the exhibit.
2) Display and operation of any electrical, mechanical, or chemical devices which may be deemed
hazardous. If there is any question, if devices may be deemed hazardous, submit them to the
appropriate controlling authorities for approval.
3) All toxic and hazardous material, including flammable liquids, compressed gas or dangerous
chemicals. Special care must be taken not to obstruct or hide from the view to the fire protection
system, air conditioning, mechanical ventilation vents, fire safety equipment, fire hose reel/riser
cabinets, fire alarm pull stations, house lighting fixtures and supervising systems.
TCT ASIA 2020
Section 8 Rules and Regulations
4) Any combustible material is prohibited during the building, especially elastic fabric.
Exhibits Move - In
Matters concerning freight forwarding should be addressed to the respective agents in the
shipping guidelines or to the Official Freight Forwarder directly, or to their agent in Shanghai.
Cargo that is consigned direct to the exhibition site should NOT arrive at the consigned address
(exhibition hall) earlier than 6/7/ 2020 i.e. before the build-up period.
When arriving at the Centre, the cargo vehicle of Party B shall enter the designated location for
unloading in the arranged order through the designated transportation passage before parking at
the designated parking lot. Trucks with the loading capacity of 5 tons and under can directly enter
the exhibition hall for unloading.
It is forbidden to move the goods in the public area, audience passage, entrance hall and the
entrance square.
The height of the vehicle allowed to enter into the hall shall not be higher than 4 meters with a
speed limit of 5 km/h.
Exhibitors, their agents or contractors are responsible for the early installation of their heavy or
large exhibits according to the move-in schedule provided by the organizer. When stand
structures are erected, it may not be possible to move in or install heavy and large exhibits that
arrive late.
Please note that, where mechanical handling within the exhibition halls is required, only the official
freight forwarder may be appointed. Forklifts, cranes and pallet trucks from other forwarders will
not be allowed into the exhibition halls.
Should any heavy or large exhibits arrive on-site without a forwarder being appointed, the
organizer will appoint the Official Freight Forwarder to be the site installation contractor on the
exhibitor’s behalf, and all costs, including any late handling surcharges incurred, will be borne by
the exhibitor.
Customs / Quarantine Requirements
TCT ASIA 2020
Section 8 Rules and Regulations
* The exhibition site is designated as a Customs Bonded Area. All exhibits brought into the
exhibition site are tax-exempt provided they are re-exported immediately after the closing of the
exhibition. No exhibits are allowed to be taken out of the exhibition area without the prior approval
of Customs.
* All promotional materials such as printed matter, films, video cassettes, and slides to be shown
to the public during the exhibition must be approved in advance by the local authorities. Exhibitors
may appoint the Official Freight Forwarder to arrange this on their behalf.
* When bringing in goods yourself from overseas or locally, you must register with the official
freight forwarder for the purpose of customs clearance before any goods can be moved out of the
exhibition hall.
Tipping
VNU and all service contractors don’t receive any tipping at any time.
Lost & Found
Please turn in any lost articles to on-site inquiry counter or organizer office.
Banking Facilities
ATM machines are located in the Entrance Hall of the venue.
Business Centre
Business Centre is located in Venue Entrance Hall, provides faxing, typing, Internet, etc. service.
Car Parking
Exhibitors and visitors who enter SNIEC by motor vehicles must follow the guidance of the
security staff and pay applicable car parking fees.
Parking Lots P1 P2 P3 P4 P5 P6
TCT ASIA 2020
Section 8 Rules and Regulations
Parking Space 2000 900 500 800
Parking Price RMB8/hour, Maximum RMB64/Day (Subject to change by Facility)
Catering and Flowers
There are designated catering and flower suppliers in the Centre. Any other non-appointed
suppliers are not allowed to run similar businesses in the Centre.
Catering in the venue
Cafeteria Name Location
Western Restaurant No.1 entrance lobby
La Cite Café Hall No.5
98 Restaurant Mezzanine of E2 & E4 Hall
McDonald's East side of W5, west side of E1,E4
KFC No.2 entrance lobby
DFJB No.2 entrance lobby
Papajohn West side of E4
Lvquan Restaurant Mezzanine of Hall W3 & W4
Lihua Unloading area between W2 and W3
Unloading area between W4 and W5
Snack Bar East side of W1-W5
Catering near the venue
Cafeteria Name Type Location
Taipei Noddle Chinese B1, Kerry Parkside
Jade Cuisine Chinese B1, Kerry Parkside
Ajisen Japanese B1, Kerry Parkside
Watami Japanese B1, Kerry Parkside
Subway Western B1, Kerry Parkside
Xinwang Restaurant Chinese F1, Kerry Parkside
TCT ASIA 2020
Section 8 Rules and Regulations
New elements Western F1, Kerry Parkside
Blue Frog Western F1, Kerry Parkside
More catering information near the venue
Catering Name Type Location
Dahuixiang Vietnam F1, Kerry Parkside
Starbucks Cafe F1, Kerry Parkside
Afternoon Tea Café and desert F1, Kerry Parkside
Shanghai Min’s Family Restaurant Chinese F2, Kerry Parkside
South Beauty Chinese F2, Kerry Parkside
Johnny Moo Western F2, Kerry Parkside
California Pizza Kitchen Western F2, Kerry Parkside
Food Fusion Southeast Asia F2, Kerry Parkside
Akasatei Japanese F2, Kerry Parkside
Irresistible Force
If the exhibition would be ended before schedule or postponed, which is caused by force majeure,
such as natural forces including but not limited to the storm, typhoon, rainstorm, earthquake, fire,
flood or the collapse of exhibition hall which out of the organizers control; or other unavoidable
circumstances, as a result of violation of law Chinese exhibitors by Chinese court or other China
government departments, relevant authority organization, the prosecution, the organizers and the
contract will be cancelled immediately and no refund of any paid money; if you ignore any legal
regulations for exhibitors, organizers of the opposition leadership, the contract will be cancelled
immediately, at the same time the organizers do not refund any amount paid. Therefore, in this
case occurs, the organizer has the right to retain the funds even if the termination of the contract,
and will continue to exhibitors pay for the goods insurance.
The right of interpretation of this Regulation shall belong to the Organizer of this Exhibition.
TCT ASIA 2020
Section 8 Rules and Regulations
Handling of Intellectual Property Infringement at the
Premises of Exhibition for Attending Merchants
Article 1
In order to protect intellectual property rights of entities attending TCT Asia 2020 (hereinafter as
"the Exhibition"), and to guarantee the legal and smooth proceeding of the exhibition, the current
regulations are enacted in accordance with the relevant provisions of the Patent Law of the PRC,
the Trademark Law of the PRC, Copyright Law of the PRC, Anti-Unfair Competition Law of the
PRC.
Article 2
If, during the time of the exhibition, any attending entity discovers any infringing acts of other
attending entities, the former may entrust the Legal Counsel especially set for this exhibition to
handle the matter at the premises.
Article 3
"Legal Counsel" mentioned in this Regulation as to handle matters refers to the Law Firm and
entrusted by the Organizer of this Exhibition.
Article 4
The applicant who has the right to apply for disposal at the premises include:
1. Patentee, trademark owners;
2. Copyright owners who have accomplished creative work within the Chinese territory, or enjoy
copyright protection by the Chinese law according to the international convention;
3. Proprietors of prior rights who enjoy other intellectual property interests;
4. Interested persons of the above intellectual property rights;
5. Other parties who have the right to apply after examination.
TCT ASIA 2020
Section 8 Rules and Regulations
Article 5
Documents and materials, which should be submitted by the applicant:
1. Certificate, certification or other written documents to prove that he is the owner of intellectual
property right in dispute and that this right remains valid at the time of application;
2. If the applicant is the interested person of the intellectual property right in dispute, apart from
the above the applicant, he/her shall have to submit certified documents to prove that he is the
interested person of such intellectual property right;
3. The applicant should submit other documents, materials or samples on the request of the
person handling the matter at the premises. If the materials supplied by the applicant do not
conform to the above stipulation, his application for disposal at the premises shall not be
accepted.
Article 6
Procedures for disposal at the premises:
1. The person in charge of the disposal at the premises will examine the application to see
whether it is acceptable;
2. Upon acceptance of the applicant, legal counsel shall proceed with preliminary investigation at
the premises, and decide whether the accused infringing acts of the accused party really exist;
3. If infringing acts are determined, legal counsel shall take disposal measures at the premises
according to the actual condition of the infringers; If the nature of infringing acts cannot be
determined at the premises, or the acts are determined as non-infringement, legal counsel shall
give the applicant necessary explanation.
Article 7
Disposal measures at the premises include:
1. Inquire for the responsible person;
2. Inspect the accused infringing product at the premises;
3. Order the accused infringer to retrieve from the Exhibition with the products, which have been
preliminary determined as infringement;
4. Take photos of the accused products so as to obtain relevant evidence;
TCT ASIA 2020
Section 8 Rules and Regulations
5. Upon the applicant's request, on-site investigation documents shall be submitted.
Article 8
This Regulation is included in the rules and regulation in the exhibitors' manual. If, any entity
finally decides to attend this Exhibition, it shall be deemed as having accepted the binding of this
Regulation, and promising to respect other's intellectual property rights and to cooperate with the
work of legal counsel.
Article 9
The Organizer of this Exhibition authorizes legal counsel handling disposal at the premises
according to the Regulation. The on-site investigation documents submitted by the legal counsel
shall be deemed as submitted by the Organizer of this Exhibition.
Article 10
The right of interpretation of this Regulation shall belong to the Organizer of this Exhibition.