tata steel international (australasia) ltd drainage...
TRANSCRIPT
Tata Steel International (Australasia) Ltd
Drainage & Plumbing Systems Stainless Steel
Section G Jan 13
Tata Steel International (Australasia) LtdHead Office 7 Bruce Roderick Drive PO Box 58880, Botany, Auckland 2163 East Tamaki, Auckland 2013 Fax 09 271 1970 Phone 09 271 1780 Email: [email protected]
Auckland 7 Bruce Roderick Drive PO Box 58880, Botany, Auckland 2163 East Tamaki, Auckland 2013 Fax 09 271 1799 Phone 09 271 1781 Email: [email protected]
Mt Maunganui 18 MacDonald Street PO Box 4158, Mt Maunganui South 3149 Mt Maunganui South 3116 Fax 07 574 0096 Phone 07 574 0095 Email: [email protected]
Hamilton 27 Ellis Street, PO Box 1133, Waikato Mail Centre, Hamilton 3240 Frankton, Hamilton 3204 Fax 07 847 0354 Phone 07 847 8456 Email: [email protected]
Hastings 117 Ellwood Road, PO Box 14043, Mayfair, Hastings 4159 RD2, Hastings 4172 Fax 06 876 3411 Phone 06 876 3360 Email:[email protected]
New Plymouth Cnr Connett Rd & Mustang Dr PO Box 3094, Fitzroy New Plymouth 4341 Bell Block, New Plymouth 4373 Fax 06 755 7574 Phone 06 755 3971 Email:[email protected]
Wellington 141 Hutt Park Road PO Box 38065, Wgtn Mail Centre, Lower Hutt 5045 Gracefield, Lower Hutt 5010 Fax 04 568 6367 Phone 04 568 5014 Email: [email protected]
Nelson 4C Akersten Street PO Box 413, Nelson 7040 Port Nelson, Nelson 7010 Fax 03 548 0588 Phone 03 548 0603 Email: [email protected]
Christchurch 200 Maces Road, P O Box 570, Christchurch 8140 Bromley, Christchurch 8062 Fax 03 381 0606 Phone 03 381 1994 Email: [email protected]
Toll free: 0800 426 787Website: www.tatasteelnz.com
Care has been taken to ensure that the contents of this publication are accurate but Tata Steel International do not accept responsibility for errors or for information which is found to be misleading. Suggestions for or descriptions of the end-use or application of products or methods of working are for information only and the company accepts no liability in respect thereof. Before using products supplied or manufactured by the company the customer should satisfy themselves of their suitability. If further assistance is required the company which has extensive research facilities will often be able to help.
ContentsBlucher - Drainage Pipes & Fittings Page G1
Blucher - Industrial Floor Drains Page G2
Blucher - Domestic Floor Drains Page G3
Blucher - Channel Drains Page G4
Blucher - Grates Page G4
Mapress - Plumbing system Pages G5-G6
S E C T I O N G
T
ata
Ste
el
GSection
Tata
Ste
elSection
G
S E C T I O N G
G1
The BLUCHER EuroPipeTM drainage pipework system consists of pipes and fittings in grade 316L stainless steel. All pipe and fittings with socket and lip sealing ring. The BLUCHER EuroPipeTM push - fit drainage pipework system provides easy to use waste water drainage pipework and rainwater pipework for all applications, e.g. commercial buildings, food factories, laboratories and black & grey water installations on board ships. BLUCHER EuroPipeTM is lightweight, versatile, aesthetically pleasing, economical and reliable. Combined labour and material savings can be considerable when compared with traditional pipe systems.
BLUCHER EuroPipeTM has proven its reliability in hundreds of thousands of metres in pipework installed over the past 3 decades worldwide.
• Available in stock, 50, 75, 110, 125, 160, and 200mm in standard lengths from 0.15 to 5 metres
• Fast and simple installation due to push-fit socket and spigot end jointing
• Easily combined with other pipe materials
• Weight is 1/3 of traditional “light weight” cast iron pipes
• Completely interchangeable between vacuum and gravity installations
Where to use it:High rise buildings, hospitals, commercial
kitchens, food and beverage industry, chemical/pharmaceutical industry, on board ships.
DRAINAGE PIPES AND FITTINGSBLUCHER
DRAINAGE PIPES AND FITTINGS
G2
The quality of a drainage system is often dependent on the water trap. BLUCHER Industrial TM features a removable water trap with excellent flow and self cleansing abilities, and owing to the carefully designed modular components in 316L stainless steel, it provides numerous possible combinations and a solution for any industrial drainage requirement.
• Ease of installation, adjustable height
• Smooth surface finish without burrs or sharp edges and austhetically pleasing appearance
• No corners or cavities inside, thus preventing bacteria growth
• Wide range of gratings suitable for medium to heavy weight loads
• Removable water trap with excellent self cleansing properties and easy rodding access.
Where to use it:Cafeteria, commercial kitchens, food and
beverage industry, chemical/pharmaceutical industry
Designed for demanding load and flow applications and with outlet sizes 75, 110 and 160mm diameter the Industrial Drain range has been developed for use within the industrial market. Suitable for tiled, screeded or vinyl floors features include a range of gratings (medium to heavy duty),filter baskets and removable water traps.
INDUSTRIAL FLOOR DRAINS
BLUCHER
FLOOR DRAINS
G3
DOMESTIC FLOOR DRAINS
The BLUCHER DomesticTM floor drains range in 316L stainless steel, is a modular system providing numerous possible combinations suitable for any type of flooring in residential, commercial and leisure applications with the Scandinavian style “wet bathroom” replacing the traditional shower tray.
• Suits all tiled or flexible sheet floor finishes
• Low frame
• Compact height to suit shallow floor depths
• Grating secured with screws
• Outlet OD 50mm - 110mm, vertical or horizontal
• Integrated side inlets
• Smooth surface finish and aesthetically pleasing appearance
• Adjustable height, rotation (360º) and tilt for a perfect fit
• Removable water trap for easy rodding access
Where to use it:In Scandinavian style “wet bathrooms”, showers,
changing rooms, hotels, offices, hospitals
BLUCHER
FLOOR DRAINS
G4
CHANNEL DRAINS AND GRATES
With the BLUCHER ChannelTM lineardrainage range, BLUCHER offers a range ofmodular drainage channels in stainless steel suitable for any linear drainage requirement e.g. in industry, on board ships and in commercial kitchens.
• Excellent flow and self cleansing capacities
• No corners or cavities inside, thus preventing bacteria growth
• Easy to inspect visually
• Integrated (variable) longitudinal fall
• Smooth joints
• Highest level of stability and resistance to deformation when exposed to heavy loads
• Combinable with the BLUCHER IndustrialTM
and BLUCHER DomesticTM floor drains range
• Some Channels carried in stock as components and semi-manufactures for quick delivery
Gratings for channels and outlet boxes
An extensive range of BLUCHER channel gratings is available to suit varying load, hygiene and flowrequirements. All gratings are 25mm deep at the bearing point to ensure a precise fit in the channelprofile.
BLUCHER
LINEAR DRAINAGE
Where to use it:Commercial kitchens, food and beverage
industry, chemical/pharmaceutical industry
G5
MAPRESS PLUMBING SYSTEM
mapressStainlessSteel Pipe
SystemThe Mapress Stainless SteelPipe System is the ultimatehigh pressure pipe system.
The electro mechanical press used during installation, ensures safe, secure pipeconnections, simply by pressing pipes and fittings. No welding and therefore no fire risk.
The high quality stainless steel used in both fittings and pipes guarantees greaterresistance against corrosion, even with aggressive water conditions.
Ease of fitting the pipe system means lower costs and the high quality MapressStainless Steel means far longer life of your water system generally.
A plumbing system for hot / cold water and compressed air / gases.
G6
MAPRESS PLUMBING SYSTEM
Coupling 90° Bend – with 2 sockets 90° Bend – with 1 socket
90° Bend – with plain ends 45° Bend – with 2 sockets 45° Bend – with 1 socket
Slip Coupling Equal T-Junction Reduced T-Junction
FI BSP Threaded Junction Ring Seals FI 90° BSP Threaded Bend
MI 90° BSP Threaded Bend FI 90° Bend with Wall Plate Adaptor Flange
Pipe Pipe Bridge Press Fitting Tool
Brackets Reducers FI BSP Threaded Adapator
MI BSP Threaded Adapator FI BSP Union Connector MI BSP Union Connector
The range of pipe and fittings is available from 15mm to 108mm (OD), depending on the fitting type.
International Approvals have been granted for many applications, please contact Tata Steel to confirm the suitability of this material for your application.