TANEK

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 1 of 8

INTRODUCTION

With up to 125 luminaire lumens per watt the Tanek range combines efficiency with a robust design ideally suited to areaswhere there is a high risk of vandalism. Designed with an extremely robust 1.2mm body with a salt spray tested all weatherpaint finish and polycarbonate diffuser the Tanek can withstand extreme physical attack with an IK10 rating whilst ensuringlong service in the field. All Tanek luminaires are supplied with tamper resistant diffuser fixings to further minimise the riskof vandalism and are supplied with our 5 year warranty to ensure peace of mind.

The Tanek has been designed to provide flexibility without compromising strength, offering 600mm, 1200mm and 1500mmhousings, white or black bodies, slim line and cornice variants, integral lithium emergency and all common dimmingvariants to ensure the Tanek can be tailored to your needs. Reacta-Link options are also available where web based controland reporting of luminaires is required.

CE

IP65

IK10

L90 / 60K OPERATING HOURS

3 STEP MACADAM ELLIPSE

APPLICATION

Exterior

Healthcare/Social Housing

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 2 of 8

Industrial/Manufacturing

Parking/Exterior

Transport

SPECIFICATION

CONSTRUCTION

Robust 1.2mm housing.

Weather proof coating for long life time, white or black as standard, other colours available on request.

Tamper resistant diffuser fixings.

Profiled 2mm diffuser for maximum impact resistance.

PERFORMANCE

Available in a wide range of lumen outputs.

Efficiencies up to 125 luminaire lumens per circuit watt.

600mm, 1200mm and 1500mm body lengths.

Frosted polycarbonate or opal polycarbonate diffuser.

LM80 verified: 90% LED lumen maintenance at 60,000 operating hours.

Standard Deviation Colour Match – 3 Step Macadam’s Ellipse.

EMERGENCY

Available with optional standard, self test and autotest integral emergency with lithium batteries for extended warrantyand lifetime (1200 and 1500mm variants only).

INSTALLATION

Four rear fixings for surface fixing.

20mm cable entry holes in luminaire ends.

VARIANTS

Available in slim line variants to minimise the risk of the luminaire being used as a foothold.

Available in 3000 kelvin.

Available in Cornice versions.

Available in standard, slim line and cornice styles.

IMAGES

PRODUCT IMAGES

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 3 of 8

Tanek Opal Diffuser Black Tanek Frosted Diffuser Black

Tanek Opal Diffuser White Tanek Frosted Diffuser White

Tanek Slim Cornice Tanek

PROJECT IMAGES

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 4 of 8

TECHNICAL

Tanek 600mm Tanek 1200mm

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 5 of 8

Tanek 1500mm Tanek Cornice 600mm

Tanek Cornice 1200mm Tanek Cornice 1500mm

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 6 of 8

Tanek Slim 1200mm Tanek Slim 1500mm

WARRANTY

At Dextra our commitment to service has been at the forefront throughout our history spanning more than forty years inthe UK lighting market. Our service ethos extends beyond design and delivery, we believe supporting your installationthroughout the warranty period is equally crucial, whilst the strength and longevity of Dextra Group provides peace of mindthat our warranty will be supported throughout.

The Dextra range is supplied with a five year warranty commencing from the date of delivery. During the first three yearsdefects will be repaired on site and the warranty will include both parts and labour. For the final two years drivers,emergency modules, wireless modules, sensors and LED circuits will be supplied free of charge to replace defectivecomponents, labour and other associated costs are not included.

Certain ranges and components are subject to exemptions:

Lithium batteries are provided with a three year warranty for parts and labour. Nickel Metal Hydride and Nickel Cadmiumbatteries are provided with a one year warranty for parts and labour.

Emergency luminaires including AME LED, EXI LED, EXI2 LED, EXI Track, HBE LED, HBE2 LED, OAT2 LED, OEZ LED andTwinspot with Nickel Metal Hydride batteries are supplied with a one year warranty for parts and labour. Lithium variantsof these ranges are supplied with a three year warranty for parts and labour with the exception of the AME2, EXI3, HBE3and TWS IP65 L7 ranges which are supplied with a one year parts and labour warranty.

Protec Micro, 7W Fire Rated Downlights Serenus and the Opus Sconce are provided with a five year replacementluminaire only warranty.

Controls systems such as standalone sensors, switches, marshalling boxes and cabling are provided with a one yearwarranty for both parts and labour. DALI control systems are provided with a two year warranty for both parts andlabour.

LEDextra ranges including Glide Power, Glide Mini, Glide RGBW, Colour Glide, Glide In Ground, Glide Pixel and AluLEDranges are supplied with a three year parts or replacement luminaire only warranty.

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 7 of 8

LEDEX ranges are supplied with a three year replacement luminaire only warranty.

All warranties are subject to correct use of the product and will be invalidated by misuse, for example incorrect installation,unsuitable environmental conditions or incorrect maintenance. It is the duty of the customer to ensure that all the fault lieswith the luminaire prior to requesting replacement parts or site repairs. In the event that no defect is found with theproduct our costs for attending site will be recharged to the customer and credit will not be issued against returnedproducts. No consequential losses incurred resulting from any defect with our product will be reimbursed.

Given the nature of LED technology a small percentage of LEDs may fail during the lifetime of a luminaire, this does notcause a reduction in lumen output. As such LED luminaires are only deemed to be faulty for warranty purposes when inexcess of ten percent of LEDs have failed in a single luminaire

On site repair of products under warranty will be undertaken during normal working hours, 9am to 5pm Monday to Friday,and will require unrestricted access to luminaires. Where required Dextra will provide access equipment to carry out repairsat height, should luminaires have been installed in locations where reasonable provision for maintenance access has notbeen made we reserve the right to supply replacement product only.

If you require any assistance with regards to our products please contact our Customer Services department on 01747858100.

DOWNLOAD WARRANTY PDF

ORDER CODES

LUMINAIRECode Description Circuit wattage Llm/WRegularTNK L16 Tanek, 1,058llm 600mm, Colour 84 12.3W 86TNK L22 Tanek, 1,454llm, 600mm, Colour 84 14.9W 97TNK L26 Tanek, 1,719llm, 1200mm ,Colour 84 17.0W 101TNK L44 Tanek, 2,908llm, 1200mm, Colour 84 25.2W 115TNK L35 Tanek, 2,314llm, 1500mm, Colour 84 21.7W 106TNK L45 Tanek, 2,975llm, 1500mm, Colour 84 27.5W 108TNK L55 Tanek, 3,636llm, 1500mm, Colour 84 34.3W 106TNK L63 Tanek, 4,164llm, 1500mm, Colour 84 40.0W 104TNK L96 Tanek, 6,346llm, 1500mm, Colour 84 55.7W 113

SlimTNKS L16 Tanek, 1,169llm, Slim, 600mm, Colour 84 12.3W 95TNKS L22 Tanek, 1,607llm, Slim, 600mm, Colour 84 14.9W 107TNKS L26 Tanek, 1,901llm, Slim, 1200mm, Colour 84 17.0W 111TNKS L44 Tanek, 3,218llm, Slim, 1200mm, Colour 84 25.2W 127TNKS L35 Tanek, 2,559llm, Slim, 1500mm, Colour 84 21.7W 117TNKS L45 Tanek, 3,290llm, Slim, 1500mm, Colour 84 27.5W 119TNKS L55 Tanek, 4,015llm, Slim, 1500mm, Colour 84 34.3W 117TNKS L63 Tanek, 4,605llm, Slim, 1500mm, Colour 84 40.0W 115TNKS L96 Tanek, 7,017llm, Slim, 1500mm, Colour 84 55.7W 125

TANEKPRODUCT SPECIFICATION

T: 01747 858100 | E: enquiries@dextragroup.co.uk | Page 8 of 8

CorniceTNKC L16 Tanek, 1,067llm, Cornice, 600mm, Colour 84 12.3W 86TNKC L22 Tanek, 1,465llm, Cornice, 600mm, Colour 84 14.9W 98TNKC L26 Tanek, 1,735llm, Cornice, 1200mm, Colour 84 17.0W 101TNKC L44 Tanek, 2,935llm, Cornice, 1200mm, Colour 84 26.0W 112TNKC L35 Tanek, 2,335llm, Cornice, 1500mm, Colour 84 21.7W 107TNKC L55 Tanek, 3,669llm, Cornice, 1500mm, Colour 84 34.3W 106TNKC L63 Tanek, 4,202llm, Cornice, 1500mm, Colour 84 40.0W 105TNKC L96 Tanek, 6,403llm, Cornice, 1500mm, Colour 84 55.7W 114

OPTICCode DescriptionOP Opal DiffuserFR Frosted Diffuser

DIMMINGCode DescriptionA DALI Digital Addressable Lighting InterfaceS Switch DimmingD DSI Digital DimmingC Bi-Level Dimming For Standalone Switched Sensor

CONTROLCode DescriptionRLI Reacta-Link, Wireless Enabled LuminairePlease click here for full details on our wireless controls.

EMERGENCYCode DescriptionLE3 Lithium Standard Emergency 3 HourLS3 Lithium Selftest Emergency 3 HourLA3 Lithium Autotest Emergency 3 HourLSTR Lithium Reacta-Link Emergency 3 HourCB Central Battery, Please specify 50v, 110v or 230v when ordering

MISCELLANEOUSCode DescriptionC** Select Colour Temperature and Rendering; C83, C84, C85, C865, C93, C94WH White FinishBL Black Finish