tables - deskmakers pricebook_1-29-20.pdf2020/01/29 · meeting and conference tables round square...
TRANSCRIPT
tables
meeting cafe training occasional
PRICE & SPECIFICATION GUIDE
Version: 9.18.19
storage
3deskmakers.com2 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
Finishes 4-6Pulls 7Meeting tables 8-121Cafe tables 122-139Training tables 140-167Occasional tables 168-187Storage 188--193Terms and Conditions 194Warranty 195
table of contentsrevisions
6/26/19 Price adjustments and corrections7/2/19 Price corrections 7/18/19 Price corrections7/31/19 Corrected Model Numbers8/8/19 Corrected Torrey colors9/18/19 Discontinued Fletcher and Redondo bases12/10/19 Updated Beacon and Mission bases
5deskmakers.com4 deskmakers.com
mee�ng cafe training occasionaltables table of contents mee�ng cafe training occasionaltable of
contents tables
standard thermofuse laminate (TFL)
HPL Match:Arborite Black AAS405CAP
laminate finishes
Black Dove Grey
HPL Match:Wilsonart Dove Grey D92-60
HPL Match:Formica Storm 912-58
HPL Match:Wilsonart Designer White D354-60
Slate Grey Glacier White Regal White
HPL Match:Arborite Elegant White AAS550-CA
HPL Match:
*Not an exact match
Black Forest Walnut *
HPL Match:Arborite Auburn Cherry Modern W466-BV*Not an exact match
California Walnut* Cognac Dri�wood*
Fawn Cypress Hardrock Maple Iconic Maple Mahogany Spice Walnut
Tenino Grey Tuscan Walnut Yorkshire Cherry Gunmetal Grey Oil Cherry
HPL Match:Coming Soon
HPL Match:Pionite Sunset HP336N
HPL Match:Coming Soon
HPL Match:Wilsonart Fawn Cypress 8208-60
HPL Match:Formica Hardrock Maple 86992-58
HPL Match:Nevamar Iconic Maple WM0047-T*Not an exact match
HPL Match:Wilsonart Empire Mahogany7122T-60
HPL Match:Pionite Spice Walnut WW561-N
HPL Match:Limited Availability
HPL Match:Arborite Chocolate Pear Tree AAW-444-FPP
HPL Match:Pionite Yorkshire Cherry WC411-N
HPL Match:Nevamar Gunmetal S620T
HPL Match:Pionite Oiled Cherry WC421-S
For HPL matches with limited availability, please call customer service. *Not available in one piece tops over 96" long.
premium textured thermofuse laminate (TFL)
Pricing shown in this price list applies only to non-premium HPL’s as follows:
A minimum charge of $150 net per HPL color will be applied to each order.
Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar.
Premium textured TFLs require a 10% upcharge. Add item code OP-TTFL-1.
For HPL matches with limited availability, please call customer service. *Not available in one piece tops over 96" long.
high pressure laminate (HPL)
HPL Match:Limited Availability
Intrigue* Iron Hemlock
HPL Match:Pionite Looks Likatre W163-OZ
HPL Match:Limited Availability
HPL Match:Formica Natural Ash 8843-WR
Natural Ash* *
HPL Match:Not Available
HPL Match:Limited Availability
Silverwood* Urban Walnut*
HPL Match:Not Available
HPL Match:Pionite WX421-LZ
7deskmakers.com6 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
Most DeskMakers product is made of Thermofuse laminate (TFL). As such, there is an upcharge for ordering product in high pressure laminate (HPL). This upcharge varies based on the product and the size of the HPL order.
Please note that only the portion of the order in HPL will be calculated to determine the level of HPL upcharges.
Product Category Option Code
TABLE BASESPanel, Rectangular and SquareEntire base HPL (expect kickplate)
50%OP-HPL1-30-?? 40% 30%
UP TO $10,000 LISTBefore HPL upcharges
$10,001 TO $50,000 LISTBefore HPL upcharges
OVER $50,000 LISTBefore HPL upcharges
(1A) (2A) (3A)
laminate finishes
Pricing shown in this price list applies only to non-premium HPL’s as follows: • Wilsonart: Solids, Woodgrains, and Abstracts in Matte (-60) finish, • Formica: Color Portfolio, Woodgrains, and Patterns in Matte (-58) finish • Pionite: Solids, Woodgrains, and Abstracts in Suede (N) finish
A minimum charge of $150 net per HPL color will be applied to each order.
Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar.
Additional lead times required for HPL orders depending on material availability and order complexity.
high pressure laminate (HPL) pricing chart
high pressure laminate (HPL)
HPL is only available with DeskMakers standard 2MM edgebanding.
Pulls are included on all drawers and cabinet doors for no upcharge.
standard pulls
premium pulls
101BL 101SN 105SN
108SN 115SN
125SN
201BL
201SN
152SN 154SN 158SN
302SN 304SN
115BL
125BL
Premium pulls are available for an upcharge of $24 per pull.
pulls
9deskmakers.com
meeting cafe training occasionaltable of contents tables
Meeting Table Tops 10-39Malibu 40-51Laguna 52-63Torrance 64-67Imperial 68-70Komo 71-79Hermosa 80-81Surfside 82-87Sunset 88-91Beacon 92-95Mission 96-99Newport 100-101Cabrillo 102-103Venice 104-117Torrey 118-121
Cafe meetingtable of contents
1110 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
meeting table tops
meeting and conference tables
round square rectangular racetrack
boatshape bow-end sightline
top shapes: round, square, rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table dimensions: depths: 36", 42" and 48"lengths: 72", 84", 96" and 120"
top shapes: rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table grain pattern will not line up at the seamconstruction: table tops are divided into two equal sectionsassembled with tite-joint fasteners and alignment biscuitsdimensions: depths: 48", 54" and 60"lengths: 120", 144", 168", 192", 216" and 240"
top shapes: rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table grain pattern will not line up at the seamconstruction: table tops are divided into two equal sectionsassembled with tite-joint fasteners and alignment biscuitsdimensions: depths: 48", 54" and 60"lengths: 216" and 240"
top shapes: rectangular, racetrack, boatshape, bow-end and sightlinegrain direction: grain direction runs length of the table grain pattern will not line up at the seamconstruction: table tops are divided into two equal sectionsassembled with tite-joint fasteners and alignment biscuitsdimensions: depths: 48", 54" and 60"lengths: 120", 144", 168", 192", 216" and 240"
one piece tops
two piece tops
three piece tops
multifinish tops
finishes
1-1/8" & 1-7/8" thick thermally fused laminate (TFL) with multiple edge options1-1/8" & 1-7/8" thick high pressure laminate (HPL) with multiple edge options1-1/8" & 1-7/8" thick plain sawn veneer, quarter sawn and planked random match veneer with multiple edge options1" thick HPL with exposed plywood core1-1/8" thick HPL with MDF core and PVC knife edge1-1/8" thick thermofoil three dimensional laminate (3DL) (select sizes) 1-1/2" thick butcher block (select sizes and shapes)1-1/8" thick planked wood (select sizes and shapes)
1312 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
edges
A11-1/8" thick top2mm PVC edge
group a
B11-1/8" thick top3/8" solid wood edge
group b
B2
1-1/8" thick top1-1/8" solid wood edge
group c
1-1/8" thick top2" solid wood edge
group d
F1
1-7/8" thick top3/8" solid wood edge
group f
1-1/8" thick top3DL ergo edge
group j
1-1/8" thick MDF top2mm PVC Knife edge
group k
E1
1-7/8" thick top2mm PVC edge
group e
1-1/8" & 1-1/2" thick solid wood topsolid wood square edge
group l
1-1/8" thick top2mm wood edge
group m
1-7/8" thick top2mm wood edge
group n
B3
C1
C2
C4
D1
D2
J1
K1
L1
M1
N1
1" thick topexposed plywood edge
group p
P1
user edges both with and without solid wood edges
A visible frame will be visible on the surface of the table top when solid wood edges are specified. Color will be matched to table top finish, however slight differences in shade and grain may be evident.
Solid wood edges are not available in white, black or solid grey.
seams of multiple piece table tops
Seams of multiple piece table tops will have mulitple pieces of wood edges. Color and grain variation can occur from piece to piece.
Grain of table top will not line up at the seams
corner detail
seam detail
Shading indicates user edges.
1514 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
AC-DPGR-71- (2) power outlets- (1) convenience outlet on bottom- (1) cutout for interface plate (not included)- (2) RJ-45 keystone knockouts (jacks not included)- (2) Cord Pass Thoughs- 144" long 15amp plug cord- Finishes: Black, Silver, White and Brushed Aluminum
AC-DPGR-72
- (2) power outlets- (2) 2.1A USB charging ports- (1) convenience outlet on bottom- (1) cutout for interface plate (not included)- (2) RJ-45 keystone knock outs (jacks not included)- (2) Cord Pass Thoughs- 144" long 15amp plug cord- Finishes: Black, Silver, White and Brushed Aluminum
AC-DPGR-73*- (6) power outlets- (2) cutouts for interface plate (not included)- (2) 108" long 15amp plug cords- Finishes: Black, Silver and Brushed Aluminum
AC-DPGR-74*- (6) power outlets- (2) 2.1A USB charging ports- (1) cutout for interface plate (not included)- (2) 108" long 15amp plug cords- Finishes: Black, Silver and Brushed Aluminum
AC-DPGR-77**- (3) power outlets- (1) convenience outlet on bottom- (1) cutout for interface plate (not included)- (2) 2.1A USB charging ports- (2) RJ-45 keystone knock outs (jacks not included)- 108" long 15amp plug cord- Finishes: Black, Silver, White and Brushed Aluminum
*CANNOT be placed inside 18” cylinder bases
*CANNOT be placed inside 18” cylinder bases
**CANNOT be placed inside 18” cylinder/rectangular bases
Please see the electrical pricebook for additional information and pricing
power grommetsPower grommet and location applicability depends on the table size and the base specified. See the Conference Table Grommet Guide for information.
17deskmakers.com16 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-CTRD-3030-??-?? 30 30 $593 $1,064 $1,309 NA $714 NA $685 $750
CF-CTRD-3636-??-?? 36 36 $602 $1,064 $1,400 $1,463 $732 $1,198 $855 $914
CF-CTRD-4242-??-?? 42 42 $755 $1,220 $1,557 $1,650 $907 $1,373 $885 $932
CF-CTRD-4848-??-?? 48 48 $916 $1,445 $1,752 $1,955 $1,126 $1,660 $1,018 $1,054
CF-CTRD-5454-??-?? 54 54 $1,091 $1,675 $2,187 $2,271 $1,294 $1,853 $1,265 $1,346
CF-CTRD-6060-??-?? 60 60 $1,147 $1,777 $2,345 $2,439 $1,363 $1,950 $1,295 $1,363
CF-CTRD-3030-??-?? 30 30 $509 NA NA NA NA
CF-CTRD-3636-??-?? 36 36 $694 NA NA NA NA
CF-CTRD-4242-??-?? 42 42 $913 NA NA NA NA
CF-CTRD-4848-??-?? 48 48 NA NA NA NA NA
CF-CTRD-5454-??-?? 54 54 NA NA NA NA NA
CF-CTRD-6060-??-?? 60 60 NA NA NA NA NA
CF-CTRD-3030-??-?? 30 30 $395 $709 $873 NA $476 NA
CF-CTRD-3636-??-?? 36 36 $401 $709 $933 $976 $488 $799
CF-CTRD-4242-??-?? 42 42 $503 $813 $1,038 $1,100 $604 $915
CF-CTRD-4848-??-?? 48 48 $610 $963 $1,168 $1,303 $751 $1,107
CF-CTRD-5454-??-?? 54 54 $727 $1,117 $1,458 $1,514 $862 $1,236
CF-CTRD-6060-??-?? 60 60 $764 $1,185 $1,563 $1,626 $909 $1,300
Model Number Depth Length
round table top TFL edge options
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
round table top veneer edge options - subject to minimum order requirements, see below.
A1
Model Number Depth Length
round table top HPL edge options
H1-A12mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1 Model Number Depth Length
round table top 3DL and solid wood options - subject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L1
1-1/8" ThickThermofoil
Ergo
3D-J1
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
TFL
HPL 3DL Butcher Block Planked Wood
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
CF-CTRD-3030-??-?? 30 30 $628 $957 $1,353 $1,515 $729 $1,003
CF-CTRD-3636-??-?? 36 36 $1,015 $1,410 $1,884 $2,110 $1,177 $1,464
CF-CTRD-4242-??-?? 42 42 $1,110 $1,569 $2,125 $2,380 $1,288 $1,634
CF-CTRD-4848-??-?? 48 48 $1,218 $1,744 $2,377 $2,662 $1,412 $1,817
CF-CTRD-5454-??-?? 54 54 $2,478 $3,069 $3,782 $4,236 $2,875 $3,152
CF-CTRD-6060-??-?? 60 60 $2,614 $3,271 $4,063 $4,551 $3,032 $3,362
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
M1 L1 L1 L1 L1
19deskmakers.com18 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-CTSQ-3030-??-?? 30 30 $521 $854 $1,092 $1,242 $651 $1,060 $567 $645
CF-CTSQ-3636-??-?? 36 36 $542 $976 $1,126 $1,279 $673 $1,094 $696 $855
CF-CTSQ-4242-??-?? 42 42 $695 $1,063 $1,281 $1,435 $844 $1,272 $712 $968
CF-CTSQ-4848-??-?? 48 48 $857 $1,260 $1,507 $1,660 $1,067 $1,579 $936 $1,071
CF-CTSQ-5454-??-?? 54 54 $1,019 $1,551 $1,618 $1,806 $1,181 $1,880 $1,226 $1,265
CF-CTSQ-3030-??-?? 30 30 $575 $1,004 $1,474 $1,340 $2,114
CF-CTSQ-3636-??-?? 36 36 $694 $1,194 $1,871 $1,611 $2,325
CF-CTSQ-4242-??-?? 42 42 $913 $1,420 $2,341 $2,030 $2,930
CF-CTSQ-4848-??-?? 48 48 NA $1,679 $2,883 $2,557 $3,692
CF-CTSQ-5454-??-?? 54 54 NA $2,448 $3,973 $3,223 $4,652
CF-CTSQ-3030-??-?? 30 30 $347 $569 $728 $828 $434 $706
CF-CTSQ-3636-??-?? 36 36 $361 $650 $751 $853 $448 $729
CF-CTSQ-4242-??-?? 42 42 $463 $708 $854 $957 $563 $848
CF-CTSQ-4848-??-?? 48 48 $571 $840 $1,005 $1,107 $711 $1,052
CF-CTSQ-5454-??-?? 54 54 $679 $1,034 $1,078 $1,204 $787 $1,253
Model Number Depth Length
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
Model Number Depth Length H1-A1
2mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1 Model Number Depth Length BL-L1 BB-L1 PL-L1 PW-L1
1-1/8" ThickThermofoil
Ergo
3D-J1
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
TFL
HPL 3DL Butcher Block Planked Wood
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
CF-CTSQ-3030-??-?? 30 30 $619 $910 $953 $1,048 $718 $956
CF-CTSQ-3636-??-?? 36 36 $1,005 $1,353 $1,404 $1,544 $1,166 $1,408
CF-CTSQ-4242-??-?? 42 42 $1,097 $1,504 $1,564 $1,720 $1,273 $1,568
CF-CTSQ-4848-??-?? 48 48 $1,204 $1,669 $1,737 $1,910 $1,397 $1,742
CF-CTSQ-5454-??-?? 54 54 $2,463 $2,986 $3,062 $3,368 $2,857 $3,068
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
M1 L1 L1 L1 L1
square table top TFL edge options
square table top veneer edge options - subject to minimum order requirements, see below.
square table top HPL edge options
square table top 3DL and solid wood options - subject to minimum order requirements, see below.
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
21deskmakers.com20 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-REC3-4816-??-?? 48 216 $2,449 $3,584 $4,031 $4,437 $2,835 $3,873
CF-REC3-4840-??-?? 48 240 $2,800 $4,099 $4,618 $5,085 $3,241 $4,437
CF-REC3-5416-??-?? 54 216 $2,707 $3,966 $4,466 $4,917 $3,136 $4,290
CF-REC3-5440-??-?? 54 240 $3,097 $4,540 $5,117 $5,636 $3,587 $4,915
CF-REC3-6016-??-?? 60 216 $2,966 $4,347 $4,900 $5,398 $3,436 $4,706
CF-REC3-6040-??-?? 60 240 $3,395 $4,981 $5,617 $6,188 $3,932 $5,392
CF-REC2-4820-??-?? 48 120 $1,205 $1,952 $2,023 $2,079 $1,398 $1,970
CF-REC2-4844-??-?? 48 144 $1,406 $2,087 $2,360 $2,605 $1,638 $2,265
CF-REC2-4868-??-?? 48 168 $1,684 $2,502 $2,830 $3,122 $1,964 $2,712
CF-REC2-4892-??-?? 48 192 $1,973 $2,928 $3,309 $3,655 $2,295 $3,174
CF-REC2-4816-??-?? 48 216 $2,371 $3,521 $3,980 $4,395 $2,761 $3,818
CF-REC2-4840-??-?? 48 240 $2,719 $4,034 $4,559 $5,034 $3,163 $4,375
CF-REC2-5444-??-?? 54 144 $1,574 $2,338 $2,645 $2,918 $1,835 $2,537
CF-REC2-5468-??-?? 54 168 $1,843 $2,735 $3,093 $3,414 $2,144 $2,967
CF-REC2-5492-??-?? 54 192 $2,157 $3,201 $3,619 $3,996 $2,511 $3,473
CF-REC2-5416-??-?? 54 216 $2,586 $3,841 $4,343 $4,793 $3,012 $4,166
CF-REC2-5440-??-?? 54 240 $2,976 $4,416 $4,994 $5,514 $3,463 $4,791
CF-REC2-6044-??-?? 60 144 $1,733 $2,572 $2,909 $3,210 $2,017 $2,790
CF-REC2-6068-??-?? 60 168 $2,027 $3,009 $3,403 $3,755 $2,360 $3,266
CF-REC2-6092-??-?? 60 192 $2,372 $3,520 $3,981 $4,395 $2,761 $3,821
CF-REC2-6016-??-?? 60 216 $2,845 $4,223 $4,778 $5,273 $3,314 $4,584
CF-REC2-6040-??-?? 60 240 $3,273 $4,859 $5,493 $6,064 $3,811 $5,271
CF-REC1-3672-??-?? 36 72 $553 $1,034 $1,078 $1,112 $642 $1,051
CF-REC1-4284-??-?? 42 84 $571 $1,120 $1,173 $1,302 $662 $1,134
CF-REC1-4884-??-?? 48 84 $580 $1,149 $1,205 $1,369 $714 $1,193
CF-REC1-4296-??-?? 42 96 $634 $1,178 $1,363 $1,529 $751 $1,275
CF-REC1-4896-??-?? 48 96 $701 $1,241 $1,430 $1,594 $837 $1,362
CF-REC1-4820-??-?? 48 120 $963 $1,637 $1,855 $2,018 $1,104 $1,676
Model Number Depth Lengthone piece top
two piece top
three piece top
CF-REC2-4820-??-?? 48 120 $1,929 $2,929 $3,035 $3,119 $2,097 $2,955 $2,059 $2,471
CF-REC2-4844-??-?? 48 144 $2,109 $3,131 $3,540 $3,908 $2,458 $3,398 $2,327 $3,091
CF-REC2-4868-??-?? 48 168 $2,526 $3,753 $4,245 $4,683 $2,945 $4,068 $2,569 $3,145
CF-REC2-4892-??-?? 48 192 $2,960 $4,392 $4,964 $5,482 $3,443 $4,761 $2,601 $3,205
CF-REC2-4816-??-?? 48 216 $3,557 $5,282 $5,971 $6,593 $4,142 $5,727 $3,115 $4,547
CF-REC2-4840-??-?? 48 240 $4,078 $6,052 $6,839 $7,550 $4,744 $6,563 $3,148 $4,607
CF-REC2-5444-??-?? 54 144 $2,361 $3,507 $3,968 $4,377 $2,752 $3,805 $3,164 $3,796
CF-REC2-5468-??-?? 54 168 $2,764 $4,103 $4,639 $5,122 $3,217 $4,451 $3,704 $4,445
CF-REC2-5492-??-?? 54 192 $3,235 $4,802 $5,429 $5,994 $3,766 $5,209 $4,335 $5,202
CF-REC2-5416-??-?? 54 216 $3,880 $5,762 $6,515 $7,191 $4,518 $6,249 $5,198 $6,238
CF-REC2-5440-??-?? 54 240 $4,465 $6,624 $7,491 $8,271 $5,195 $7,187 $5,983 $7,179
CF-REC2-6044-??-?? 60 144 $2,599 $3,858 $4,364 $4,816 $3,025 $4,186 $3,483 $4,180
CF-REC2-6068-??-?? 60 168 $3,041 $4,514 $5,104 $5,634 $3,540 $4,898 $4,074 $4,889
CF-REC2-6092-??-?? 60 192 $3,559 $5,281 $5,972 $6,593 $4,142 $5,731 $4,767 $5,721
CF-REC2-6016-??-?? 60 216 $4,268 $6,336 $7,167 $7,909 $4,972 $6,876 $5,720 $6,864
CF-REC2-6040-??-?? 60 240 $4,910 $7,288 $8,240 $9,097 $5,716 $7,906 $6,579 $7,895
CF-REC3-4816-??-?? 48 216 $3,674 $5,376 $6,047 $6,655 $4,253 $5,809 $3,795 $4,592
CF-REC3-4840-??-?? 48 240 $4,200 $6,148 $6,926 $7,627 $4,861 $6,655 $3,827 $4,652
CF-REC3-5416-??-?? 54 216 $4,061 $5,949 $6,699 $7,376 $4,704 $6,436 $5,441 $6,530
CF-REC3-5440-??-?? 54 240 $4,646 $6,810 $7,675 $8,454 $5,381 $7,373 $6,224 $7,469
CF-REC3-6016-??-?? 60 216 $4,449 $6,521 $7,351 $8,096 $5,154 $7,060 $5,961 $7,153
CF-REC3-6040-??-?? 60 240 $5,092 $7,471 $8,426 $9,282 $5,899 $8,089 $6,822 $8,187
CF-REC1-3672-??-?? 36 72 $915 $1,551 $1,618 $1,668 $963 $1,578 $1,226 $1,472
CF-REC1-4284-??-?? 42 84 $922 $1,681 $1,760 $1,953 $994 $1,700 $1,250 $1,501
CF-REC1-4884-??-?? 48 84 $940 $1,724 $1,809 $2,053 $1,072 $1,790 $1,258 $1,575
CF-REC1-4296-??-?? 42 96 $952 $1,768 $2,046 $2,293 $1,126 $1,913 $1,267 $1,519
CF-REC1-4896-??-?? 48 96 $1,051 $1,862 $2,146 $2,392 $1,256 $2,044 $1,409 $1,690
CF-REC1-4820-??-?? 48 120 $1,445 $2,455 $2,783 $3,026 $1,657 $2,515 $1,934 $2,322
Model Number Depth Lengthone piece top
two piece top
three piece top
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- 120" one piece conference table tops not available in all TFL finishes, see Materials Specification Guide for availability.- For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
H1-A12mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1
HPL
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
rectangular table top TFL edge options
rectangular table top HPL edge options
23deskmakers.com22 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-REC1-3672-??-?? 36 72 $1,869 $2,392 $2,468 $2,715 $2,168 $2,474
CF-REC1-4284-??-?? 42 84 $2,053 $2,662 $2,752 $3,027 $2,382 $2,759
CF-REC1-4884-??-?? 48 84 $2,150 $2,785 $2,869 $3,078 $2,494 $2,898
CF-REC1-4296-??-?? 42 96 $2,153 $2,820 $2,918 $3,210 $2,497 $2,927
CF-REC1-4896-??-?? 48 96 $2,263 $2,960 $3,062 $3,369 $2,626 $3,070
CF-REC1-4820-??-?? 48 120 NA NA NA NA NA NA
CF-RECM-4820-?? 48 120 $2,065 $2,828 $2,898 $2,955 $2,258 $2,845
CF-RECM-4844-?? 48 144 $2,266 $2,964 $3,236 $3,482 $2,467 $3,141
CF-RECM-4868-?? 48 168 $2,544 $3,378 $3,706 $3,998 $2,824 $3,588
CF-RECM-4892-?? 48 192 $2,833 $3,803 $4,185 $4,530 $3,155 $4,050
CF-RECM-4816-?? 48 216 $3,231 $4,397 $4,856 $5,271 $3,621 $4,694
CF-RECM-4840-?? 48 240 $3,579 $4,910 $5,435 $5,909 $4,023 $5,251
CF-RECM-5444-?? 54 144 $2,434 $3,215 $3,520 $3,794 $2,659 $3,412
CF-RECM-5468-?? 54 168 $2,703 $3,612 $3,970 $4,291 $2,965 $3,843
CF-RECM-5492-?? 54 192 $3,017 $4,078 $4,495 $4,871 $3,324 $4,349
CF-RECM-5416-?? 54 216 $3,446 $4,716 $5,219 $5,670 $3,817 $5,042
CF-RECM-5440-?? 54 240 $3,837 $5,293 $5,870 $6,390 $4,260 $5,668
CF-RECM-6044-?? 60 144 $2,593 $3,449 $3,785 $4,086 $2,839 $3,667
CF-RECM-6068-?? 60 168 $2,887 $3,885 $4,279 $4,631 $3,175 $4,141
CF-RECM-6092-?? 60 192 $3,232 $4,397 $4,858 $5,271 $3,570 $4,698
CF-RECM-6016-?? 60 216 $3,706 $5,100 $5,653 $6,148 $4,112 $5,460
CF-RECM-6040-?? 60 240 $4,133 $5,735 $6,370 $6,941 $4,600 $6,146
CF-REC3-4816-??-?? 48 216 $6,147 $7,418 $7,586 $8,005 $7,131 $7,644
CF-REC3-4840-??-?? 48 240 $6,374 $7,762 $7,944 $8,401 $7,394 $8,007
CF-REC3-5416-??-?? 54 216 $7,991 $9,298 $9,489 $10,437 $9,270 $9,504
CF-REC3-5440-??-?? 54 240 $8,245 $9,668 $9,876 $10,863 $9,564 $9,892
CF-REC3-6016-??-?? 60 216 $8,236 $9,571 $9,767 $10,743 $9,553 $9,782
CF-REC3-6040-??-?? 60 240 $8,517 $9,968 $10,181 $11,199 $9,879 $10,197
CF-REC2-4820-??-?? 48 120 $3,882 $4,696 $4,814 $5,296 $4,503 $4,824
CF-REC2-4844-??-?? 48 144 $4,109 $5,039 $5,174 $5,692 $4,767 $5,185
CF-REC2-4868-??-?? 48 168 $4,337 $5,377 $5,513 $5,856 $5,030 $5,561
CF-REC2-4892-??-?? 48 192 $4,564 $5,719 $5,871 $6,252 $5,294 $5,924
CF-REC2-4816-??-?? 48 216 NA NA NA NA NA NA
CF-REC2-4840-??-?? 48 240 NA NA NA NA NA NA
CF-REC2-5444-??-?? 54 144 $5,339 $6,298 $6,438 $7,081 $6,194 $6,449
CF-REC2-5468-??-?? 54 168 $5,593 $6,667 $6,824 $7,508 $6,489 $6,837
CF-REC2-5492-??-?? 54 192 $5,847 $7,038 $7,211 $7,933 $6,783 $7,226
CF-REC2-5416-??-?? 54 216 NA NA NA NA NA NA
CF-REC2-5440-??-?? 54 240 NA NA NA NA NA NA
CF-REC2-6044-??-?? 60 144 $5,504 $6,491 $6,635 $7,299 $6,385 $6,647
CF-REC2-6068-??-?? 60 168 $5,784 $6,888 $7,049 $7,754 $6,710 $7,062
CF-REC2-6092-??-?? 60 192 $6,065 $7,285 $7,463 $8,209 $7,036 $7,477
CF-REC2-6016-??-?? 60 216 NA NA NA NA NA NA
CF-REC2-6040-??-?? 60 240 NA NA NA NA NA NA
rectangular table top veneer edge options - subject to minimum order requirements, see below.
multi-finish rectangular table topTFL edge options
- For premium TFL, change "T1" to "T2" and add 10%.- On three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Three piece table tops are divided into three equal sections.- Specify end finish and middle finish on P.O. - Prices apply to TFL finishes only. For mixing HPL and TFL finishes, contact customer service for pricing.
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - For two piece and three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications, finishes and requirements.
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
Model Number Depth Lengththree piece top
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
one piece top
two piece top
three piece top
25deskmakers.com24 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-RTR3-4816-??-?? 48 216 $2,649 $3,781 $4,231 $4,643 $3,036 $4,077
CF-RTR3-4840-??-?? 48 240 $3,026 $4,333 $4,851 $5,321 $3,473 $4,669
CF-RTR3-5416-??-?? 54 216 $2,929 $4,189 $4,689 $5,144 $3,360 $4,516
CF-RTR3-5440-??-?? 54 240 $3,350 $4,801 $5,377 $5,897 $3,846 $5,174
CF-RTR3-6016-??-?? 60 216 $3,209 $4,597 $5,148 $5,646 $3,685 $4,955
CF-RTR3-6040-??-?? 60 240 $3,673 $5,268 $5,902 $6,473 $4,219 $5,680
CF-RTR2-4820-??-?? 48 120 $1,229 $2,083 $2,612 $2,778 $1,426 $2,101
CF-RTR2-4844-??-?? 48 144 $1,526 $2,404 $2,823 $3,068 $1,761 $2,388
CF-RTR2-4868-??-?? 48 168 $1,802 $2,607 $3,083 $3,359 $2,076 $2,815
CF-RTR2-4892-??-?? 48 192 $2,104 $3,050 $3,427 $3,767 $2,428 $3,296
CF-RTR2-4816-??-?? 48 216 $2,529 $3,658 $4,110 $4,521 $2,915 $3,954
CF-RTR2-4840-??-?? 48 240 $2,906 $4,210 $4,729 $5,196 $3,353 $4,546
CF-RTR2-5444-??-?? 54 144 $1,711 $2,476 $2,780 $3,057 $1,971 $2,674
CF-RTR2-5468-??-?? 54 168 $2,001 $2,896 $3,254 $3,577 $2,306 $3,129
CF-RTR2-5492-??-?? 54 192 $2,340 $3,388 $3,807 $4,185 $2,699 $3,661
CF-RTR2-5416-??-?? 54 216 $2,809 $4,065 $4,568 $5,022 $3,239 $4,393
CF-RTR2-5440-??-?? 54 240 $3,229 $4,677 $5,254 $5,774 $3,724 $5,052
CF-RTR2-6044-??-?? 60 144 $1,880 $2,723 $3,060 $3,361 $2,167 $2,941
CF-RTR2-6068-??-?? 60 168 $2,200 $3,186 $3,579 $3,932 $2,537 $3,442
CF-RTR2-6092-??-?? 60 192 $2,575 $3,727 $4,188 $4,602 $2,969 $4,027
CF-RTR2-6016-??-?? 60 216 $3,089 $4,473 $5,025 $5,522 $3,562 $4,833
CF-RTR2-6040-??-?? 60 240 $3,553 $5,144 $5,780 $6,351 $4,094 $5,559
CF-RTR1-3672-??-?? 36 72 $575 $1,117 $1,458 $1,553 $688 $1,187
CF-RTR1-4284-??-?? 42 84 $617 $1,218 $1,615 $1,638 $716 $1,242
CF-RTR1-4884-??-?? 48 84 $680 $1,252 $1,659 $1,668 $804 $1,329
CF-RTR1-4296-??-?? 42 96 $737 $1,309 $1,720 $1,884 $838 $1,412
CF-RTR1-4896-??-?? 48 96 $802 $1,376 $1,773 $1,935 $926 $1,500
CF-RTR1-4820-??-?? 48 120 $1,063 $1,772 $2,109 $2,273 $1,206 $1,813
Model Number Depth Lengthone piece top
two piece top
three piece top
CF-RTR2-4820-??-?? 48 120 $1,953 $3,125 $3,919 $4,167 $2,139 $3,151 $2,259 $2,710
CF-RTR2-4844-??-?? 48 144 $2,289 $3,326 $4,234 $4,602 $2,642 $3,582 $2,468 $3,081
CF-RTR2-4868-??-?? 48 168 $2,704 $3,911 $4,624 $5,039 $3,114 $4,223 $2,599 $3,145
CF-RTR2-4892-??-?? 48 192 $3,156 $4,576 $5,141 $5,650 $3,643 $4,944 $2,635 $3,205
CF-RTR2-4816-??-?? 48 216 $3,794 $5,487 $6,165 $6,782 $4,373 $5,931 $3,152 $4,547
CF-RTR2-4840-??-?? 48 240 $4,359 $6,315 $7,094 $7,794 $5,029 $6,819 $3,189 $4,607
CF-RTR2-5444-??-?? 54 144 $2,567 $3,715 $4,170 $4,585 $2,957 $4,011 $3,439 $4,127
CF-RTR2-5468-??-?? 54 168 $3,001 $4,345 $4,882 $5,365 $3,459 $4,695 $4,022 $4,827
CF-RTR2-5492-??-?? 54 192 $3,510 $5,082 $5,712 $6,277 $4,049 $5,491 $4,703 $5,643
CF-RTR2-5416-??-?? 54 216 $4,214 $6,099 $6,852 $7,534 $4,858 $6,589 $5,646 $6,776
CF-RTR2-5440-??-?? 54 240 $4,844 $7,016 $7,881 $8,661 $5,587 $7,578 $6,492 $7,790
CF-RTR2-6044-??-?? 60 144 $2,820 $4,084 $4,590 $5,042 $3,251 $4,412 $3,778 $4,534
CF-RTR2-6068-??-?? 60 168 $3,300 $4,779 $5,368 $5,899 $3,805 $5,164 $4,422 $5,306
CF-RTR2-6092-??-?? 60 192 $3,863 $5,591 $6,283 $6,904 $4,454 $6,040 $5,176 $6,212
CF-RTR2-6016-??-?? 60 216 $4,633 $6,710 $7,538 $8,284 $5,344 $7,250 $6,209 $7,451
CF-RTR2-6040-??-?? 60 240 $5,329 $7,716 $8,670 $9,527 $6,142 $8,339 $7,142 $8,570
CF-RTR3-4816-??-?? 48 216 $3,974 $5,672 $6,346 $6,964 $4,554 $6,115 $3,832 $4,592
CF-RTR3-4840-??-?? 48 240 $4,540 $6,499 $7,276 $7,981 $5,209 $7,003 $3,869 $4,652
CF-RTR3-5416-??-?? 54 216 $4,393 $6,284 $7,035 $7,716 $5,041 $6,774 $5,887 $7,065
CF-RTR3-5440-??-?? 54 240 $5,025 $7,201 $8,065 $8,845 $5,769 $7,762 $6,733 $8,080
CF-RTR3-6016-??-?? 60 216 $4,814 $6,895 $7,722 $8,470 $5,528 $7,432 $6,450 $7,741
CF-RTR3-6040-??-?? 60 240 $5,510 $7,902 $8,854 $9,709 $6,329 $8,521 $7,383 $8,860
CF-RTR1-3672-??-?? 36 72 $931 $1,675 $2,187 $2,330 $1,033 $1,780 $1,156 $1,388
CF-RTR1-4284-??-?? 42 84 $940 $1,827 $2,423 $2,458 $1,073 $1,863 $1,240 $1,487
CF-RTR1-4884-??-?? 48 84 $1,020 $1,878 $2,489 $2,502 $1,206 $1,994 $1,277 $1,575
CF-RTR1-4296-??-?? 42 96 $1,107 $1,965 $2,580 $2,827 $1,257 $2,118 $1,483 $1,779
CF-RTR1-4896-??-?? 48 96 $1,203 $2,064 $2,660 $2,904 $1,388 $2,250 $1,611 $1,933
CF-RTR1-4820-??-?? 48 120 $1,594 $2,658 $3,164 $3,410 $1,810 $2,720 $2,137 $2,565
Model Number Depth Lengthone piece top
two piece top
three piece top
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- 120" one piece conference table tops not available in all TFL finishes, see Materials Specification Guide for availability.- For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
H1-A12mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1
HPL
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
racetrack table top TFL edge options
racetrack table top HPL edge options
27deskmakers.com26 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-RTR1-3672-??-?? 36 72 $1,884 $2,476 $3,190 $3,508 $2,186 $2,558
CF-RTR1-4284-??-?? 42 84 $2,071 $2,761 $3,593 $3,952 $2,402 $2,857
CF-RTR1-4884-??-?? 48 84 $2,168 $2,888 $3,634 $3,634 $2,516 $3,001
CF-RTR1-4296-??-?? 42 96 $2,173 $2,929 $3,840 $4,223 $2,520 $3,034
CF-RTR1-4896-??-?? 48 96 $2,284 $3,072 $4,024 $4,425 $2,649 $3,182
CF-RTR1-4820-??-?? 48 120 NA NA NA NA NA NA
CF-RTRM-4820-?? 48 120 $2,089 $2,959 $3,488 $3,654 $2,286 $2,976
CF-RTRM-4844-?? 48 144 $2,386 $3,280 $3,698 $3,944 $2,588 $3,265
CF-RTRM-4868-?? 48 168 $2,662 $3,483 $3,958 $4,235 $2,936 $3,691
CF-RTRM-4892-?? 48 192 $2,964 $3,926 $4,302 $4,643 $3,288 $4,171
CF-RTRM-4816-?? 48 216 $3,389 $4,533 $4,986 $5,397 $3,775 $4,830
CF-RTRM-4840-?? 48 240 $3,766 $5,086 $5,605 $6,072 $4,213 $5,422
CF-RTRM-5444-?? 54 144 $2,571 $3,352 $3,864 $4,140 $2,793 $3,550
CF-RTRM-5468-?? 54 168 $2,861 $3,773 $4,131 $4,453 $3,122 $4,005
CF-RTRM-5492-?? 54 192 $3,199 $4,265 $4,683 $5,061 $3,509 $4,538
CF-RTRM-5416-?? 54 216 $3,669 $4,942 $5,443 $5,898 $4,037 $5,270
CF-RTRM-5440-?? 54 240 $4,089 $5,553 $6,131 $6,650 $4,515 $5,928
CF-RTRM-6044-?? 60 144 $2,739 $3,598 $3,936 $4,238 $2,987 $3,817
CF-RTRM-6068-?? 60 168 $3,060 $4,061 $4,455 $4,809 $3,349 $4,319
CF-RTRM-6092-?? 60 192 $3,401 $4,603 $5,064 $5,479 $3,775 $4,903
CF-RTRM-6016-?? 60 216 $3,949 $5,360 $5,901 $6,399 $4,356 $5,709
CF-RTRM-6040-?? 60 240 $4,413 $6,021 $6,656 $7,227 $4,879 $6,434
CF-RTR3-4816-??-?? 48 216 $6,185 $7,624 $9,115 $9,115 $7,174 $7,850
CF-RTR3-4840-??-?? 48 240 $6,415 $7,985 $9,612 $9,612 $7,441 $8,232
CF-RTR3-5416-??-?? 54 216 $8,029 $9,508 $11,291 $12,420 $9,314 $9,714
CF-RTR3-5440-??-?? 54 240 $8,287 $9,897 $11,838 $13,022 $9,613 $10,121
CF-RTR3-6016-??-?? 60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998
CF-RTR3-6040-??-?? 60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431
CF-RTR2-4820-??-?? 48 120 $3,906 $4,827 $5,935 $6,529 $4,531 $4,955
CF-RTR2-4844-??-?? 48 144 $4,137 $5,189 $6,456 $7,101 $4,799 $5,335
CF-RTR2-4868-??-?? 48 168 $4,367 $5,544 $6,764 $6,764 $5,066 $5,729
CF-RTR2-4892-??-?? 48 192 $4,598 $5,906 $7,261 $7,261 $5,333 $6,111
CF-RTR2-4816-??-?? 48 216 NA NA NA NA NA NA
CF-RTR2-4840-??-?? 48 240 NA NA NA NA NA NA
CF-RTR2-5444-??-?? 54 144 $5,367 $6,452 $7,759 $8,535 $6,226 $6,603
CF-RTR2-5468-??-?? 54 168 $5,624 $6,841 $8,306 $9,137 $6,525 $7,010
CF-RTR2-5492-??-?? 54 192 $5,882 $7,229 $8,854 $9,740 $6,823 $7,417
CF-RTR2-5416-??-?? 54 216 NA NA NA NA NA NA
CF-RTR2-5440-??-?? 54 240 NA NA NA NA NA NA
CF-RTR2-6044-??-?? 60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806
CF-RTR2-6068-??-?? 60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239
CF-RTR2-6092-??-?? 60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673
CF-RTR2-6016-??-?? 60 216 NA NA NA NA NA NA
CF-RTR2-6040-??-?? 60 240 NA NA NA NA NA NA
racetrack table top veneer edge options - subject to minimum order requirements, see below.
multi-finish racetrack table topTFL edge options
- For premium TFL, change "T1" to "T2" and add 10%.- On three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Three piece table tops are divided into three equal sections.- Specify end finish and middle finish on P.O. - Prices apply to TFL finishes only. For mixing HPL and TFL finishes, contact customer service for pricing.
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - For two piece and three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications, finishes and requirements.
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
Model Number Depth Lengththree piece top
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
one piece top
two piece top
three piece top
29deskmakers.com28 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BOT3-4816-??-?? 42-48 216 $2,649 $3,781 $4,479 $4,888 $3,036 $4,077
CF-BOT3-4840-??-?? 42-48 240 $3,026 $4,333 $5,095 $5,567 $3,473 $4,669
CF-BOT3-5416-??-?? 44-54 216 $2,929 $4,189 $4,964 $5,416 $3,360 $4,516
CF-BOT3-5440-??-?? 44-54 240 $3,350 $4,801 $5,649 $6,170 $3,846 $5,174
CF-BOT3-6016-??-?? 50-60 216 $3,209 $4,597 $5,448 $5,946 $3,685 $4,955
CF-BOT3-6040-??-?? 50-60 240 $3,673 $5,268 $6,203 $6,775 $4,219 $5,680
CF-BOT2-4820-??-?? 42-48 120 $1,229 $2,083 $2,612 $2,777 $1,426 $2,101
CF-BOT2-4844-??-?? 42-48 144 $1,526 $2,217 $2,823 $3,100 $1,761 $2,388
CF-BOT2-4868-??-?? 42-48 168 $1,802 $2,607 $3,115 $3,401 $2,076 $2,815
CF-BOT2-4892-??-?? 42-48 192 $2,104 $3,050 $3,611 $3,946 $2,428 $3,296
CF-BOT2-4816-??-?? 42-48 216 $2,529 $3,658 $4,357 $4,765 $2,915 $3,954
CF-BOT2-4840-??-?? 42-48 240 $2,906 $4,210 $4,972 $5,442 $3,353 $4,546
CF-BOT2-5444-??-?? 44-54 144 $1,711 $2,476 $2,965 $3,240 $1,971 $2,674
CF-BOT2-5468-??-?? 44-54 168 $2,001 $2,896 $3,459 $3,780 $2,306 $3,129
CF-BOT2-5492-??-?? 44-54 192 $2,340 $3,388 $4,011 $4,387 $2,699 $3,661
CF-BOT2-5416-??-?? 44-54 216 $2,809 $4,065 $4,841 $5,295 $3,239 $4,393
CF-BOT2-5440-??-?? 44-54 240 $3,229 $4,677 $5,526 $6,048 $3,724 $5,052
CF-BOT2-6044-??-?? 50-60 144 $1,880 $2,723 $3,261 $3,564 $2,167 $2,941
CF-BOT2-6068-??-?? 50-60 168 $2,200 $3,186 $3,803 $4,160 $2,537 $3,442
CF-BOT2-6092-??-?? 50-60 192 $2,575 $3,727 $4,413 $4,829 $2,969 $4,027
CF-BOT2-6016-??-?? 50-60 216 $3,089 $4,473 $5,326 $5,823 $3,562 $4,833
CF-BOT2-6040-??-?? 50-60 240 $3,553 $5,144 $6,080 $6,652 $4,094 $5,559
CF-BOT1-3672-??-?? 30-36 72 $575 $1,117 $1,594 $1,690 $676 $1,187
CF-BOT1-4284-??-?? 36-42 84 $653 $1,218 $1,752 $1,916 $703 $1,242
CF-BOT1-4884-??-?? 42-48 84 $718 $1,252 $1,626 $1,684 $789 $1,329
CF-BOT1-4296-??-?? 36-42 96 $737 $1,309 $1,856 $2,021 $823 $1,412
CF-BOT1-4896-??-?? 42-48 96 $802 $1,376 $1,908 $2,040 $910 $1,500
CF-BOT1-4820-??-?? 42-48 120 $1,063 $1,772 $2,167 $2,332 $1,184 $1,813
Model Number Depth Lengthone piece top
two piece top
three piece top
CF-BOT2-4820-??-?? 42-48 120 $1,953 $3,125 $3,919 $4,165 $2,139 $3,151 $2,259 $2,710
CF-BOT2-4844-??-?? 42-48 144 $2,289 $3,326 $4,234 $4,651 $2,642 $3,582 $2,468 $3,081
CF-BOT2-4868-??-?? 42-48 168 $2,704 $3,911 $4,673 $5,101 $3,114 $4,223 $2,599 $3,145
CF-BOT2-4892-??-?? 42-48 192 $3,156 $4,576 $5,416 $5,919 $3,643 $4,944 $2,635 $3,205
CF-BOT2-4816-??-?? 42-48 216 $3,794 $5,487 $6,535 $7,148 $4,373 $5,931 $3,152 $4,547
CF-BOT2-4840-??-?? 42-48 240 $4,359 $6,315 $7,459 $8,164 $5,029 $6,819 $3,189 $4,607
CF-BOT2-5444-??-?? 44-54 144 $2,567 $3,715 $4,448 $4,860 $2,957 $4,011 $3,439 $4,127
CF-BOT2-5468-??-?? 44-54 168 $3,001 $4,345 $5,189 $5,671 $3,459 $4,695 $4,022 $4,827
CF-BOT2-5492-??-?? 44-54 192 $3,510 $5,082 $6,017 $6,580 $4,049 $5,491 $4,703 $5,643
CF-BOT2-5416-??-?? 44-54 216 $4,214 $6,099 $7,262 $7,942 $4,858 $6,589 $5,646 $6,776
CF-BOT2-5440-??-?? 44-54 240 $4,844 $7,016 $8,289 $9,072 $5,587 $7,578 $6,492 $7,790
CF-BOT2-6044-??-?? 50-60 144 $2,820 $4,084 $4,892 $5,347 $3,251 $4,412 $3,778 $4,534
CF-BOT2-6068-??-?? 50-60 168 $3,300 $4,779 $5,705 $6,240 $3,805 $5,164 $4,422 $5,306
CF-BOT2-6092-??-?? 50-60 192 $3,863 $5,591 $6,620 $7,244 $4,454 $6,040 $5,176 $6,212
CF-BOT2-6016-??-?? 50-60 216 $4,633 $6,710 $7,989 $8,735 $5,344 $7,250 $6,209 $7,451
CF-BOT2-6040-??-?? 50-60 240 $5,329 $7,716 $9,120 $9,978 $6,142 $8,339 $7,142 $8,570
CF-BOT3-4816-??-?? 42-48 216 $3,974 $5,672 $6,719 $7,332 $4,554 $6,115 $3,832 $4,592
CF-BOT3-4840-??-?? 42-48 240 $4,540 $6,499 $7,643 $8,351 $5,209 $7,003 $3,869 $4,652
CF-BOT3-5416-??-?? 44-54 216 $4,393 $6,284 $7,446 $8,124 $5,041 $6,774 $5,887 $7,065
CF-BOT3-5440-??-?? 44-54 240 $5,025 $7,201 $8,474 $9,256 $5,769 $7,762 $6,733 $8,080
CF-BOT3-6016-??-?? 50-60 216 $4,814 $6,895 $8,171 $8,919 $5,528 $7,432 $6,450 $7,741
CF-BOT3-6040-??-?? 50-60 240 $5,510 $7,902 $9,304 $10,162 $6,329 $8,521 $7,383 $8,860
CF-BOT1-3672-??-?? 30-36 72 $931 $1,675 $2,392 $2,536 $1,014 $1,780 $1,156 $1,388
CF-BOT1-4284-??-?? 36-42 84 $980 $1,827 $2,629 $2,874 $1,055 $1,863 $1,214 $1,576
CF-BOT1-4884-??-?? 42-48 84 $1,076 $1,878 $2,439 $2,526 $1,185 $1,994 $1,277 $1,675
CF-BOT1-4296-??-?? 36-42 96 $1,107 $1,965 $2,785 $3,032 $1,234 $2,118 $1,483 $1,779
CF-BOT1-4896-??-?? 42-48 96 $1,203 $2,064 $2,863 $3,061 $1,366 $2,250 $1,611 $1,933
CF-BOT1-4820-??-?? 42-48 120 $1,594 $2,658 $3,251 $3,498 $1,775 $2,720 $2,137 $2,565
Model Number Depth Lengthone piece top
two piece top
three piece top
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- 120" one piece conference table tops not available in all TFL finishes, see Materials Specification Guide for availability.- For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
H1-A12mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1
HPL
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
boatshaped table top TFL edge options
boatshaped table top HPL edge options
31deskmakers.com30 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BOT1-3672-??-?? 30-36 72 $1,884 $2,476 $3,190 $3,508 $2,186 $2,558
CF-BOT1-4284-??-?? 36-42 84 $2,071 $2,761 $3,593 $3,952 $2,402 $2,857
CF-BOT1-4884-??-?? 42-48 84 $2,168 $2,888 $3,634 $3,634 $2,516 $3,001
CF-BOT1-4296-??-?? 36-42 96 $2,173 $2,929 $3,840 $4,223 $2,520 $3,034
CF-BOT1-4896-??-?? 42-48 96 $2,284 $3,072 $4,024 $4,425 $2,649 $3,182
CF-BOT1-4820-??-?? 42-48 120 NA NA NA NA NA NA
CF-BOTM-4820-?? 42-48 120 $2,089 $2,959 $3,488 $3,652 $2,104 $2,750
CF-BOTM-4844-?? 42-48 144 $2,386 $3,093 $3,698 $3,976 $2,588 $3,265
CF-BOTM-4868-?? 42-48 168 $2,662 $3,483 $3,990 $4,276 $2,936 $3,691
CF-BOTM-4892-?? 42-48 192 $2,964 $3,926 $4,487 $4,821 $3,288 $4,171
CF-BOTM-4816-?? 42-48 216 $3,389 $4,533 $5,232 $5,641 $3,775 $4,830
CF-BOTM-4840-?? 42-48 240 $3,766 $5,086 $5,848 $6,318 $4,213 $5,422
CF-BOTM-5444-?? 44-54 144 $2,571 $3,352 $3,841 $4,115 $2,793 $3,550
CF-BOTM-5468-?? 44-54 168 $2,861 $3,773 $4,335 $4,656 $3,122 $4,005
CF-BOTM-5492-?? 44-54 192 $3,199 $4,157 $4,888 $5,263 $3,509 $4,538
CF-BOTM-5416-?? 44-54 216 $3,669 $4,942 $5,717 $6,170 $4,037 $5,270
CF-BOTM-5440-?? 44-54 240 $4,089 $5,553 $6,402 $6,923 $4,515 $5,928
CF-BOTM-6044-?? 50-60 144 $2,739 $3,598 $4,137 $4,440 $2,987 $3,817
CF-BOTM-6068-?? 50-60 168 $3,060 $4,061 $4,679 $5,036 $3,349 $4,319
CF-BOTM-6092-?? 50-60 192 $3,435 $4,603 $5,289 $5,704 $3,775 $4,903
CF-BOTM-6016-?? 50-60 216 $3,949 $5,350 $6,202 $6,700 $4,356 $5,709
CF-BOTM-6040-?? 50-60 240 $4,413 $6,021 $6,956 $7,528 $4,879 $6,434
CF-BOT3-4816-??-?? 42-48 216 $6,185 $7,624 $9,115 $9,115 $7,174 $7,850
CF-BOT3-4840-??-?? 42-48 240 $6,415 $7,985 $9,612 $9,612 $7,441 $8,232
CF-BOT3-5416-??-?? 44-54 216 $8,029 $9,508 $11,291 $12,420 $9,314 $9,714
CF-BOT3-5440-??-?? 44-54 240 $8,287 $9,897 $11,838 $13,022 $9,613 $10,121
CF-BOT3-6016-??-?? 50-60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998
CF-BOT3-6040-??-?? 50-60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431
CF-BOT2-4820-??-?? 42-48 120 $3,906 $4,827 $5,935 $6,529 $4,531 $4,955
CF-BOT2-4844-??-?? 42-48 144 $4,137 $5,189 $6,456 $7,101 $4,799 $5,335
CF-BOT2-4868-??-?? 42-48 168 $4,367 $5,544 $6,764 $6,764 $5,066 $5,729
CF-BOT2-4892-??-?? 42-48 192 $4,598 $5,906 $7,261 $7,261 $5,333 $6,111
CF-BOT2-4816-??-?? 42-48 216 NA NA NA NA NA NA
CF-BOT2-4840-??-?? 42-48 240 NA NA NA NA NA NA
CF-BOT2-5444-??-?? 44-54 144 $5,367 $6,452 $7,759 $8,535 $6,226 $6,603
CF-BOT2-5468-??-?? 44-54 168 $5,624 $6,841 $8,306 $9,137 $6,525 $7,010
CF-BOT2-5492-??-?? 44-54 192 $5,882 $7,229 $8,854 $9,740 $6,823 $7,417
CF-BOT2-5416-??-?? 44-54 216 NA NA NA NA NA NA
CF-BOT2-5440-??-?? 44-54 240 NA NA NA NA NA NA
CF-BOT2-6044-??-?? 50-60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806
CF-BOT2-6068-??-?? 50-60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239
CF-BOT2-6092-??-?? 50-60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673
CF-BOT2-6016-??-?? 50-60 216 NA NA NA NA NA NA
CF-BOT2-6040-??-?? 50-60 240 NA NA NA NA NA NA
boatshaped table top veneer edge options - subject to minimum order requirements, see below.
multi-finish boatshaped table topTFL edge options
- For premium TFL, change "T1" to "T2" and add 10%.- On three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Three piece table tops are divided into three equal sections.- Specify end finish and middle finish on P.O. - Prices apply to TFL finishes only. For mixing HPL and TFL finishes, contact customer service for pricing.
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - For two piece and three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications, finishes and requirements.
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
Model Number Depth Lengththree piece top
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
one piece top
two piece top
three piece top
33deskmakers.com32 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BOW3-4816-??-?? 48 216 $2,649 $3,781 $4,231 $4,643 $3,036 $4,077
CF-BOW3-4840-??-?? 48 240 $3,026 $4,333 $4,851 $5,321 $3,473 $4,669
CF-BOW3-5416-??-?? 54 216 $2,929 $4,189 $4,689 $5,144 $3,360 $4,516
CF-BOW3-5440-??-?? 54 240 $3,350 $4,801 $5,377 $5,897 $3,846 $5,174
CF-BOW3-6016-??-?? 60 216 $3,209 $4,597 $5,148 $5,646 $3,685 $4,955
CF-BOW3-6040-??-?? 60 240 $3,673 $5,268 $5,902 $6,473 $4,219 $5,680
CF-BOW2-4820-??-?? 48 120 $1,229 $2,083 $2,612 $2,777 $1,426 $2,101
CF-BOW2-4844-??-?? 48 144 $1,526 $2,210 $2,823 $3,100 $1,761 $2,388
CF-BOW2-4868-??-?? 48 168 $1,802 $2,606 $3,115 $3,401 $2,076 $2,815
CF-BOW2-4892-??-?? 48 192 $2,104 $3,050 $3,427 $3,767 $2,428 $3,296
CF-BOW2-4816-??-?? 48 216 $2,529 $3,658 $4,110 $4,521 $2,915 $3,954
CF-BOW2-4840-??-?? 48 240 $2,906 $4,210 $4,728 $5,196 $3,353 $4,546
CF-BOW2-5444-??-?? 54 144 $1,711 $2,476 $2,780 $3,057 $1,971 $2,674
CF-BOW2-5468-??-?? 54 168 $2,001 $2,896 $3,254 $3,577 $2,306 $3,129
CF-BOW2-5492-??-?? 54 192 $2,340 $3,388 $3,807 $4,185 $2,699 $3,661
CF-BOW2-5416-??-?? 54 216 $2,809 $4,065 $4,568 $5,022 $3,239 $4,393
CF-BOW2-5440-??-?? 54 240 $3,229 $4,677 $5,254 $5,774 $3,724 $5,052
CF-BOW2-6044-??-?? 60 144 $1,880 $2,723 $3,060 $3,361 $2,167 $2,941
CF-BOW2-6068-??-?? 60 168 $2,200 $3,187 $3,579 $3,932 $2,537 $3,442
CF-BOW2-6092-??-?? 60 192 $2,575 $3,727 $4,188 $4,602 $2,969 $4,027
CF-BOW2-6016-??-?? 60 216 $3,089 $4,473 $5,025 $5,522 $3,562 $4,833
CF-BOW2-6040-??-?? 60 240 $3,553 $5,144 $5,780 $6,351 $4,094 $5,559
CF-BOW1-3672-??-?? 36 72 $575 $1,117 $1,458 $1,553 $688 $1,187
CF-BOW1-4284-??-?? 42 84 $617 $1,218 $1,615 $1,638 $716 $1,242
CF-BOW1-4884-??-?? 48 84 $680 $1,252 $1,550 $1,669 $804 $1,329
CF-BOW1-4296-??-?? 42 96 $737 $1,309 $1,720 $1,884 $838 $1,412
CF-BOW1-4896-??-?? 48 96 $802 $1,376 $1,773 $1,935 $926 $1,500
CF-BOW1-4820-??-?? 48 120 $1,063 $1,772 $2,109 $2,273 $1,206 $1,813
Model Number Depth Lengthone piece top
two piece top
three piece top
CF-BOW2-4820-??-?? 48 120 $1,953 $3,125 $3,919 $4,165 $2,139 $3,151 $2,259 $2,710
CF-BOW2-4844-??-?? 48 144 $2,289 $3,316 $4,234 $4,651 $2,642 $3,582 $2,468 $3,081
CF-BOW2-4868-??-?? 48 168 $2,704 $3,909 $4,673 $5,101 $3,114 $4,223 $2,599 $3,145
CF-BOW2-4892-??-?? 48 192 $3,156 $4,576 $5,141 $5,650 $3,643 $4,944 $2,635 $3,205
CF-BOW2-4816-??-?? 48 216 $3,794 $5,487 $6,165 $6,782 $4,373 $5,931 $3,152 $4,547
CF-BOW2-4840-??-?? 48 240 $4,359 $6,315 $7,092 $7,794 $5,029 $6,819 $3,189 $4,607
CF-BOW2-5444-??-?? 54 144 $2,567 $3,715 $4,170 $4,585 $2,957 $4,011 $3,439 $4,127
CF-BOW2-5468-??-?? 54 168 $3,001 $4,345 $4,882 $5,365 $3,459 $4,695 $4,022 $4,827
CF-BOW2-5492-??-?? 54 192 $3,510 $5,082 $5,712 $6,277 $4,049 $5,491 $4,703 $5,643
CF-BOW2-5416-??-?? 54 216 $4,214 $6,099 $6,852 $7,534 $4,858 $6,589 $5,646 $6,776
CF-BOW2-5440-??-?? 54 240 $4,844 $7,016 $7,881 $8,661 $5,587 $7,578 $6,492 $7,790
CF-BOW2-6044-??-?? 60 144 $2,820 $4,084 $4,590 $5,042 $3,251 $4,412 $3,778 $4,534
CF-BOW2-6068-??-?? 60 168 $3,300 $4,780 $5,368 $5,899 $3,805 $5,164 $4,422 $5,306
CF-BOW2-6092-??-?? 60 192 $3,863 $5,591 $6,283 $6,904 $4,454 $6,040 $5,176 $6,212
CF-BOW2-6016-??-?? 60 216 $4,633 $6,710 $7,538 $8,284 $5,344 $7,250 $6,209 $7,451
CF-BOW2-6040-??-?? 60 240 $5,329 $7,716 $8,670 $9,527 $6,142 $8,339 $7,142 $8,570
CF-BOW3-4816-??-?? 48 216 $3,974 $5,672 $6,346 $6,964 $4,554 $6,115 $3,832 $4,592
CF-BOW3-4840-??-?? 48 240 $4,540 $6,499 $7,276 $7,981 $5,209 $7,003 $3,869 $4,652
CF-BOW3-5416-??-?? 54 216 $4,393 $6,284 $7,035 $7,716 $5,041 $6,774 $5,887 $7,065
CF-BOW3-5440-??-?? 54 240 $5,025 $7,201 $8,065 $8,845 $5,769 $7,762 $6,733 $8,080
CF-BOW3-6016-??-?? 60 216 $4,814 $6,895 $7,722 $8,470 $5,528 $7,432 $6,450 $7,741
CF-BOW3-6040-??-?? 60 240 $5,510 $7,902 $8,854 $9,709 $6,329 $8,521 $7,383 $8,860
CF-BOW1-3672-??-?? 36 72 $931 $1,675 $2,187 $2,330 $1,033 $1,780 $1,156 $1,388
CF-BOW1-4284-??-?? 42 84 $926 $1,827 $2,423 $2,458 $1,073 $1,863 $1,240 $1,487
CF-BOW1-4884-??-?? 48 84 $1,020 $1,878 $2,324 $2,504 $1,206 $1,994 $1,277 $1,575
CF-BOW1-4296-??-?? 42 96 $1,107 $1,965 $2,580 $2,827 $1,257 $2,118 $1,483 $1,779
CF-BOW1-4896-??-?? 48 96 $1,203 $2,064 $2,660 $2,904 $1,388 $2,250 $1,611 $1,933
CF-BOW1-4820-??-?? 48 120 $1,594 $2,658 $3,164 $3,410 $1,810 $2,720 $2,137 $2,565
Model Number Depth Lengthone piece top
two piece top
three piece top
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- 120" one piece conference table tops not available in all TFL finishes, see Materials Specification Guide for availability.- For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
H1-A12mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1
HPL
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
bow-end table top TFL edge options
bow-end table top HPL edge options
35deskmakers.com34 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BOW1-3672-??-?? 36 72 $1,884 $2,476 $3,052 $3,358 $2,186 $2,558
CF-BOW1-4284-??-?? 42 84 $2,071 $2,761 $3,456 $3,801 $2,402 $2,857
CF-BOW1-4884-??-?? 48 84 $2,168 $2,888 $3,634 $3,634 $2,516 $3,001
CF-BOW1-4296-??-?? 42 96 $2,173 $2,929 $3,704 $4,075 $2,520 $3,034
CF-BOW1-4896-??-?? 48 96 $2,284 $3,072 $3,888 $4,275 $2,649 $3,182
CF-BOW1-4820-??-?? 48 120 NA NA NA NA NA NA
CF-BOWM-4820-?? 48 120 $2,089 $2,959 $3,488 $3,652 $2,286 $2,976
CF-BOWM-4844-?? 48 144 $2,386 $3,086 $3,698 $3,976 $2,588 $3,265
CF-BOWM-4868-?? 48 168 $2,662 $3,482 $3,990 $4,276 $2,936 $3,691
CF-BOWM-4892-?? 48 192 $2,964 $3,926 $4,302 $4,643 $3,288 $4,171
CF-BOWM-4816-?? 48 216 $3,389 $4,533 $4,986 $5,397 $3,775 $4,830
CF-BOWM-4840-?? 48 240 $3,766 $5,086 $5,604 $6,072 $4,213 $5,422
CF-BOWM-5444-?? 54 144 $2,571 $3,352 $3,864 $4,140 $2,793 $3,550
CF-BOWM-5468-?? 54 168 $2,861 $3,773 $4,131 $4,453 $3,122 $4,005
CF-BOWM-5492-?? 54 192 $3,199 $4,265 $4,683 $5,061 $3,509 $4,538
CF-BOWM-5416-?? 54 216 $3,669 $4,942 $5,443 $5,898 $4,037 $5,270
CF-BOWM-5440-?? 54 240 $4,089 $5,553 $6,131 $6,650 $4,515 $5,928
CF-BOWM-6044-?? 60 144 $2,739 $3,598 $3,936 $4,238 $2,987 $3,817
CF-BOWM-6068-?? 60 168 $3,060 $4,061 $4,455 $4,809 $3,349 $4,319
CF-BOWM-6092-?? 60 192 $3,435 $4,603 $5,064 $5,479 $3,775 $4,903
CF-BOWM-6016-?? 60 216 $3,949 $5,350 $5,901 $6,399 $4,356 $5,709
CF-BOWM-6040-?? 60 240 $4,413 $6,021 $6,656 $7,227 $4,879 $6,434
CF-BOW3-4816-??-?? 48 216 $6,185 $7,624 $9,115 $9,115 $7,174 $7,850
CF-BOW3-4840-??-?? 48 240 $6,415 $7,985 $9,612 $9,612 $7,441 $8,232
CF-BOW3-5416-??-?? 54 216 $8,029 $9,508 $11,291 $12,420 $9,314 $9,714
CF-BOW3-5440-??-?? 54 240 $8,287 $9,897 $11,838 $13,022 $9,613 $10,121
CF-BOW3-6016-??-?? 60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998
CF-BOW3-6040-??-?? 60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431
CF-BOW2-4820-??-?? 48 120 $3,906 $4,827 $5,935 $6,529 $4,531 $4,955
CF-BOW2-4844-??-?? 48 144 $4,137 $5,189 $6,456 $7,101 $4,799 $5,335
CF-BOW2-4868-??-?? 48 168 $4,367 $5,544 $6,764 $6,764 $5,066 $5,729
CF-BOW2-4892-??-?? 48 192 $4,598 $5,906 $7,261 $7,261 $5,333 $6,111
CF-BOW2-4816-??-?? 48 216 NA NA NA NA NA NA
CF-BOW2-4840-??-?? 48 240 NA NA NA NA NA NA
CF-BOW2-5444-??-?? 54 144 $5,367 $6,452 $7,759 $8,535 $6,226 $6,603
CF-BOW2-5468-??-?? 54 168 $5,624 $6,841 $8,306 $9,137 $6,525 $7,010
CF-BOW2-5492-??-?? 54 192 $5,882 $7,229 $8,854 $9,740 $6,823 $7,417
CF-BOW2-5416-??-?? 54 216 NA NA NA NA NA NA
CF-BOW2-5440-??-?? 54 240 NA NA NA NA NA NA
CF-BOW2-6044-??-?? 60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806
CF-BOW2-6068-??-?? 60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239
CF-BOW2-6092-??-?? 60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673
CF-BOW2-6016-??-?? 60 216 NA NA NA NA NA NA
CF-BOW2-6040-??-?? 60 240 NA NA NA NA NA NA
bow-end table top veneer edge options - subject to minimum order requirements, see below.
multi-finish bow-end table topTFL edge options
- For premium TFL, change "T1" to "T2" and add 10%.- On three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Three piece table tops are divided into three equal sections.- Specify end finish and middle finish on P.O. - Prices apply to TFL finishes only. For mixing HPL and TFL finishes, contact customer service for pricing.
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - For two piece and three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications, finishes and requirements.
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
Model Number Depth Lengththree piece top
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
one piece top
two piece top
three piece top
37deskmakers.com36 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-SLN3-6016-??-?? 36-60 216 $3,411 $4,801 $5,653 $6,150 $3,890 $5,160
CF-SLN3-6040-??-?? 36-60 240 $3,874 $5,471 $6,407 $6,979 $4,343 $5,885
CF-SLN2-6020-??-?? 36-60 120 $1,324 $2,038 $2,435 $2,598 $1,446 $2,080
CF-SLN2-6044-??-?? 36-60 144 $2,081 $2,927 $3,465 $3,768 $2,374 $3,146
CF-SLN2-6068-??-?? 36-60 168 $2,402 $3,389 $4,009 $4,363 $2,692 $3,646
CF-SLN2-6092-??-?? 36-60 192 $2,829 $3,932 $4,618 $5,032 $3,172 $4,231
CF-SLN2-6016-??-?? 36-60 216 $3,291 $4,679 $5,531 $6,027 $3,697 $5,037
CF-SLN2-6040-??-?? 36-60 240 $3,753 $5,349 $6,283 $6,854 $4,221 $5,763
CF-SLN1-4896-??-?? 30-48 96 $1,022 $1,580 $1,948 $2,113 $1,130 $1,704
CF-SLN1-5496-??-?? 30-54 96 $1,094 $1,660 $2,047 $2,218 $1,187 $1,788
CF-SLN1-6020-??-?? 36-60 120 $1,106 $1,742 $2,149 $2,330 $1,418 $1,878
Model Number Depth Lengthone piece top
two piece top
three piece top
CF-SLN2-6020-??-?? 36-60 120 $1,986 $3,058 $3,652 $3,897 $2,168 $3,120 $2,661 $3,193
CF-SLN2-6044-??-?? 36-60 144 $3,122 $4,390 $5,198 $5,652 $3,562 $4,720 $4,183 $5,019
CF-SLN2-6068-??-?? 36-60 168 $3,604 $5,085 $6,014 $6,545 $4,037 $5,469 $4,829 $5,794
CF-SLN2-6092-??-?? 36-60 192 $4,243 $5,899 $6,926 $7,547 $4,758 $6,346 $5,685 $6,822
CF-SLN2-6016-??-?? 36-60 216 $4,936 $7,019 $8,296 $9,041 $5,546 $7,556 $6,613 $7,936
CF-SLN2-6040-??-?? 36-60 240 $5,631 $8,024 $9,424 $10,280 $6,333 $8,644 $7,544 $9,052
CF-SLN3-6016-??-?? 36-60 216 $5,116 $7,201 $8,480 $9,225 $5,834 $7,741 $6,855 $8,225
CF-SLN3-6040-??-?? 36-60 240 $5,812 $8,208 $9,612 $10,470 $6,515 $8,829 $7,788 $9,344
CF-SLN1-4896-??-?? 30-48 96 $1,534 $2,370 $2,922 $3,170 $1,696 $2,555 $2,054 $2,466
CF-SLN1-5496-??-?? 30-54 96 $1,641 $2,490 $3,070 $3,328 $1,780 $2,682 $2,200 $2,638
CF-SLN1-6020-??-?? 36-60 120 $1,659 $2,614 $3,223 $3,494 $2,127 $2,817 $2,221 $2,667
Model Number Depth Lengthone piece top
two piece top
three piece top
- For premium TFL, change "T1" to "T2" and add 10%.- TFL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding.- 120" one piece conference table tops not available in all TFL finishes, see Materials Specification Guide for availability.- For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
- HPL tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For two piece and three piece table tops, please note that the grain pattern will not line up at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications and finishes.
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
H1-A12mm PVC Knife Plywood
1-1/8" ThickStandard HPL
1-1/8" ThickMDF Core
1" ThickPlywood Core
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-1/8" ThickStandard HPL
1-7/8" ThickStandard HPL
1-7/8" ThickStandard HPL
H1-B? H1-C? H1-D? H1-E1 H1-F1 H1-K1 H1-P1
HPL
2mm PVC
B1 B2
B33/8" Wood
C1 C2
C41-1/8" Wood
D22" Wood
D1
E1
2mm PVC
F1
3/8" Wood
A1 K1 P1
sightline table top TFL edge options
sightline table top HPL edge options
39deskmakers.com38 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
OP-REVL-01 Tops up to 96" $253
OP-REVL-02 Tops from 97" to 120" $321
OP-REVL-03 Tops from 121" to 144" $438
OP-REVL-04 Tops from 145" to 192" $626
OP-REVL-05 Tops from 193" to 240" $939
Model Number Table Top Length Price
reveal below table top
- Reveal raises the overall height of the table by 1/2".- Specify silver metallic, white, black or matching PVC finish for reveal. - Reveal is 1/2" thick and is inset 1/2" from edge of table top.
for all conference table tops
for round and square table topsOP-REVL-11 Round or Square Tops up to 60" $261
CF-SLN1-4896-??-?? 30-48 96 $2,284 $3,072 $4,024 $4,425 $2,649 $3,182
CF-SLN1-5496-??-?? 30-54 96 $2,928 $3,749 $4,740 $5,215 $3,397 $3,864
CF-SLN1-6020-??-?? 36-60 120 NA NA NA NA NA NA
CF-SLNM-6020-?? 36-60 120 $2,184 $2,915 $3,310 $3,474 $2,306 $2,956
CF-SLNM-6044-?? 36-60 144 $2,941 $3,804 $4,343 $4,645 $3,190 $4,023
CF-SLNM-6068-?? 36-60 168 $3,261 $4,266 $4,886 $5,240 $3,551 $4,522
CF-SLNM-6092-?? 36-60 192 $3,636 $4,809 $5,494 $5,907 $3,974 $5,107
CF-SLNM-6016-?? 36-60 216 $4,150 $5,554 $6,406 $6,902 $4,557 $5,913
CF-SLNM-6040-?? 36-60 240 $4,613 $6,224 $7,159 $7,731 $5,081 $6,639
CF-SLN3-6016-??-?? 36-60 216 $8,275 $9,786 $11,610 $12,770 $9,599 $9,998
CF-SLN3-6040-??-?? 36-60 240 $8,559 $10,202 $12,183 $13,401 $9,929 $10,431
CF-SLN2-6020-??-?? 36-60 120 $5,249 $6,235 $7,422 $8,165 $6,088 $6,372
CF-SLN2-6044-??-?? 36-60 144 $5,533 $6,650 $7,997 $8,796 $6,418 $6,806
CF-SLN2-6068-??-?? 36-60 168 $5,817 $7,066 $8,571 $9,428 $6,748 $7,239
CF-SLN2-6092-??-?? 36-60 192 $6,101 $7,481 $9,145 $10,060 $7,077 $7,673
CF-SLN2-6016-??-?? 36-60 216 NA NA NA NA NA NA
CF-SLN2-6040-??-?? 36-60 240 NA NA NA NA NA NA
sightline table top veneer edge options - subject to minimum order requirements, see below.
multi-finish sightline table topTFL edge options
- For premium TFL, change "T1" to "T2" and add 10%.- On three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Three piece table tops are divided into three equal sections.- Specify end finish and middle finish on P.O. - Prices apply to TFL finishes only. For mixing HPL and TFL finishes, contact customer service for pricing.
- Veneer table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - For quarter sawn veneer, change "V1" to "V2" and add 10%.- For planked random match veneer, change "V1" to "V3" and add 20%.- Veneer only available in Maple, White Oak and Walnut with clear coat finish. - For two piece and three piece table tops, please note that the grain pattern will not line up perfectly at the seams.- Two piece table tops are divided into two equal sections. - Three piece table tops are divided into three equal sections.- Tables with sections larger than 96" are available in Southern California and/or will call only. - Please see the Materials Specification Guide for specifications, finishes and requirements.
Depth Length2mm Wood
V1-M1
1-1/8" ThickPlain Sawn
B1 B2
B33/8" Wood
1-1/8" ThickPlain Sawn
C1 C2
C41-1/8" Wood
1-1/8" ThickPlain Sawn
D22" Wood
1-1/8" ThickPlain Sawn
D1
1-7/8" ThickPlain Sawn
N1
2mm Wood
1-7/8" ThickPlain Sawn
F1
3/8" Wood
V1-B? V1-C? V1-D? V1-E1 V1-F1
M1
Natural Veneer
Model Number
Model Number Depth Lengththree piece top
2mm PVC
T1-A1
1-1/8" ThickStandard TFL
B1 B2
B33/8" Wood
1-1/8" ThickStandard TFL
C1 C2
C41-1/8" Wood
1-1/8" ThickStandard TFL
D22" Wood
1-1/8" ThickStandard TFL
D1
1-7/8" ThickStandard TFL
E1
2mm PVC
1-7/8" ThickStandard TFL
F1
3/8" Wood
T1-B? T1-C? T1-D? T1-E1 T1-F1
A1
TFL
one piece top
two piece top
three piece top
4140 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
malibu bases
rectangular panel square
- constructed of 1-1/8" thick material- side panels available in the same or a different finish than end panels- standard in TFL, HPL available at an upcharge - edges are 2mm PVC- hollow construction allows wires to pass through- all bases are sold as a set with wire management stretcher troughs between bases- end bases include a wire management grommet hole near top of base on trough side- middle bases include a wire management grommet hole near top of base on both sides
- 5" deep- 20" wide, 24" wide & 30" wide- 2-1/2" x 6" wire management cutout in top - 2-1/2" grommet in bottom- rectangular, racetrack, boatshaped and bow-end tops only- minimum table size: 36" x 72"- maximum table size: 60" x 240"
- 12" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- rectangular, racetrack, boatshaped, bow-end and sightline tops- minimum table size: 36" x 72"- maximum table size: 60" x 240"
- 18" deep, 24" deep & 30" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- square, rectangular, racetrack, boatshaped, bow-end and sightline tops - minimum table size: 36" x 36"- maximum table size: 60" x 240"
offering
details
4342 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BSQ2-1-18 36" Square 18 1 $461
CF-BSQ2-1-20 42" Square 20 1 $519
CF-BSQ2-1-24 48" Square 24 1 $576
CF-BSQ2-1-30 54", 60" Square 30 1 $650
- Standard in single TFL finish. No charge for side panels in a different TFL finish. Must specify on PO.- For silver metallic side panels add OP-CONF-SLVP for $141 per base.- Square bases are hollow with 10" square openings at top and bottom for wire management. - Square bases should not be used with round tops. - Non-radiused edge bases are not available with kickplate.
malibu base for square table tops
pricing
Model Number Price
Table Top Size(s) Base Size Bases
Included
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
wire management stretcher trough
Wire management stretcher troughs are 13-1/2" wide x 6-1/2" high, with interior clearance of 12" wide x 5-3/4" high.
grain direction
optional stainless steel side panels
For silver metallic side panels add OP-CONF-SLVP for $141 per base.
table tops for malibu bases
square* rectangular racetrack boatshape bow-end sightline**rectangular/square bases only*square base only
malibu base details
4544 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BPN5-24-240 48 x 240 24 44 3/4 $1,580
CF-BPN5-30-240 54 x 240, 60 x 240 30 44 3/4 $1,603
Center of 4th Base
36 72 17-1/2 54-1/2
42/48 84 20-1/2 63-1/2
42/48 96 20-1/2 75-1/2
48 120 20-1/2 60 99-1/2
48/54/60 144 20-1/2 72 123-1/2
48/54/60 168 20-1/2 84 147-1/2
48/54/60 192 20-1/2 70-13/16 121-3/16 171-1/2
48/54/60 216 20-1/2 78-13/16 137-7/16 195-1/2
48/54/60 240 20-1/2 70-1/4 120 169-3/4 219-1/2
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
base placement rectangular, racetrack, boatshape and bow-end table tops
For 36" and 42" Deep Table Tops
For 48" Wide Deep Table Tops
For 54" and 60" Deep Table Tops
5"
30"
2-3/4"
27-5/8"
1st2nd
3rd4th
5th
Center of 5th Base
2-1/2"
6"
dimensions
CF-BPN4-24-168 48 x 168 24 37 1/4 $1,265
CF-BPN4-30-168 54 x 168, 60 x 168 30 37 1/4 $1,283
CF-BPN4-24-192 48 x 192 24 45 1/4 $1,301
CF-BPN4-30-192 54 x 192, 60 x 192 30 45 1/4 $1,320
CF-BPN4-24-216 48 x 216 24 53 1/4 $1,316
CF-BPN4-30-216 54 x 216, 60 x 216 30 53 1/4 $1,334
CF-BPN3-24-120 48 x 120 24 34 1/2 $1,055
CF-BPN3-24-144 48 x 144 24 46 1/2 $1,070
CF-BPN3-30-144 54 x 144, 60 x 144 30 46 1/2 $1,084
CF-BPN2-20-72 36 x 72 20 32 $607
CF-BPN2-20-84 42 x 84 20 38 $686
CF-BPN2-24-84 48 x 84 24 38 $718
CF-BPN2-20-96 42 x 96 20 50 $702
CF-BPN2-24-96 48 x 96 24 50 $747
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
5 Bases & 4 Stretchers
- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- 5" thick panel bases are hollow with 2.5" x 8" opening at top and a 2.5" grommet at the bottom for wire management.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
pricing
5"
24"
2-3/4"
21-5/8"
2-1/2"
6"
5"
20"
2-3/4"
17-5/8"
2-1/2"
6"
malibu panel base
Side Elevation
3-1/2"
28-5/8"
4746 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
36 72 18 54
42/48 84 24 60
42/48 96 24 72
48* 120 24 96
48** 120 24 60 96
48/54/60 144 24 72 120
48/54/60 168 24 84 144
48/54/60 192 24 72 120 168
48/54/60 216 24 80 136 192
48/54/60 240 24 88 152 216
base placement rectangular, racetrack, boatshape, bow-end and sightline table tops
*one piece top**two and three piece top
malibu rectangular base
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
CF-BRN4-24-192 48 x 192 24 36 $2,629
CF-BRN4-30-192 54 x 192, 60 x 192 30 36 $2,759
CF-BRN4-24-216 48 x 216 24 44 $2,669
CF-BRN4-30-216 54 x 216, 60 x 216 30 44 $2,919
CF-BRN4-24-240 48 x 240 24 52 $2,770
CF-BRN4-30-240 54 x 240, 60 x 240 30 52 $3,021
CF-BRN3-24-120 48 x 120 (2 & 3 piece top) 24 24 $2,055
CF-BRN3-24-144 48 x 144 24 36 $2,094
CF-BRN3-30-144 54 x 144, 60 x 144 30 36 $2,212
CF-BRN3-24-168 48 x 168 24 48 $2,135
CF-BRN3-30-168 54 x 168, 60 x 168 30 48 $2,253
CF-BRN2-18-72 36 x 72 18 24 $1,052
CF-BRN2-18-84 42 x 84 18 24 $1,087
CF-BRN2-24-84 48 x 84 24 24 $1,167
CF-BRN2-18-96 42 x 96, 18 36 $1,119
CF-BRN2-24-96 48 x 96 24 36 $1,198
CF-BRN2-24-120 48 x 120 (1 piece top) 24 60 $1,232
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Rectangular bases are hollow with 10"x15.5" opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.
For 36" and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
12"
30"
9-3/4"
27-5/8"
10"
15-1/2"
dimensions
Side Elevation
3-1/2"
28-5/8"
12"
24"
9-3/4"
21-5/8"
10"
15-1/2"
12"
18"
9-3/4"
15-5/8"
10"
15-1/2"
4948 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
base placement rectangular, racetrack, boatshape and bow-end table tops
malibu square base
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
dimensions
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
CF-BSN4-24-192 48 x 192 24 20 $2,695
CF-BSN4-30-192 54 x 192, 60 x 192 30 12 $3,096
CF-BSN4-24-216 48 x 216 24 28 $2,854
CF-BSN4-30-216 54 x 216, 60 x 216 30 20 $3,255
CF-BSN4-24-240 48 x 240 24 36 $2,956
CF-BSN4-30-240 54 x 240, 60 x 240 30 28 $3,357
CF-BSN3-24-144 48 x 144 24 18 $2,144
CF-BSN3-30-144 54 x 144, 60 x 144 30 9 $2,424
CF-BSN3-24-168 48 x 168 24 30 $2,186
CF-BSN3-30-168 54 x 168, 60 x 168 30 21 $2,466
CF-BSN2-18-72 36 x 72 18 12 $1,081
CF-BSN2-18-84 42 x 84 18 12 $1,114
CF-BSN2-18-96 42 x 96 18 24 $1,146
CF-BSN2-24-96 48 x 96 24 12 $1,419
CF-BSN2-24-120 48 x 120 24 36 $1,453
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.
36 72 21 51
42 84 27 57
42 96 27 69
48 96 30 66
48 120 30 90
48 144 30 72 114
48 168 30 84 138
48 192 30 74 118 162
48 216 30 82 134 186
48 240 30 90 150 210
54/60 144 33 72 111
54/60 168 33 84 135
54/60 192 33 75 117 159
54/60 216 33 83 133 183
54/60 240 33 91 149 207
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
For 36"and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
30"
30"
27-3/4"
27-5/8"
10"
10"
24"
24"
21-3/4"
21-5/8"
10"
10"
18"
18"
15-3/4"
15-5/8"
10"
10"
Side Elevation
3-1/2"
28-5/8"
5150 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
48 96 24 72
54 96 24 72
60 120 24 96
60 120 24 60 96
60 144 24 72 120
60 168 24 84 144
60 192 24 72 120 168
60 216 24 80 136 192
60 240 24 88 152 216
square base placement sightline table tops
48 96 27 69
54 96 27 66
60 120 27 90
60 120 27 57 90
60 144 27 69 114
60 168 27 81 138
60 192 27 69 114 162
60 216 27 77 130 186
60 240 27 85 146 210
1st2nd
3rd4th
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
pricing - square bases
CF-BSS4-1824-192 60 x 192 18-18-24-24 24 $2,189
CF-BSS4-1824-216 60 x 216 18-18-24-24 32 $2,348
CF-BSS4-1824-240 60 x 240 18-18-24-24 40 $2,450
CF-BSS3-1824-120 60 x 120 (2-piece top) 18-18-24 12 $1,954
CF-BSS3-1824-144 60 x 144 18-18-24 24 $1,997
CF-BSS3-1824-168 60 x 168 18-18-24 36 $2,037
CF-BSS2-1818-96 48 x 96 18-18 24 $1,146
CF-BSS2-1824-96 54 x 96 18-24 18 $1,367
CF-BSS2-1824-120 60 x 120 (1-piece top) 18-24 42 $1,401
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing - rectangular bases
CF-BRS4-1830-192 60 x 192 18-24-24-30 36 $2,458
CF-BRS4-1830-216 60 x 216 18-24-24-30 44 $2,618
CF-BRS4-1830-240 60 x 240 18-24-24-30 52 $2,720
CF-BRS3-1830-120 60 x 120 (2-piece top) 18-24-30 24 $1,905
CF-BRS3-1830-144 60 x 144 18-24-30 36 $1,949
CF-BRS3-1830-168 60 x 168 18-24-30 48 $1,991
CF-BRS2-1824-96 48 x 96 18-24 36 $1,118
CF-BRS2-1830-96 54 x 96 18-30 36 $1,331
CF-BRS2-1830-120 60 x 120 (1-piece top) 18-30 60 $1,367
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
rectangular base placement sightline table tops
*one piece top**two and three piece top
- Standard in single TFL finish. No charge for side panels in a different TFL finish. Specify clearly on P.O.- For silver metallic side panels, add OP-CONF-SLVP for $141 per base.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Rectangular bases are hollow with 10"x15.5" opening at top and bottom for wire management. - Shipped in pieces and require assembly.- Non-radiused edge bases are not available with kickplate.
malibu bases for sightline table tops
5352 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
laguna bases
rectangular panel square
- constructed of 1-1/8" thick material, with radiused corners- recessed kickplate is 1-1/8" high, standard finish is black - radius corners are solid wood- wood corners only available in wood or grey tones, not available in white or black- standard in TFL, HPL available at an upcharge - hollow construction allows wires to pass through- all bases are sold as a set with wire management stretcher troughs between bases- end bases include a wire management grommet hole near top of base on trough side- middle bases include a wire management grommet hole near top of base on both sides
- 5" deep- 20" wide, 24" wide & 30" wide- 2-1/2" x 8" wire management cutout in top - 2-1/2" grommet in bottom- rectangular, racetrack, boatshaped and bow-end tops- minimum table size: 36" x 72"- maximum table size: 60" x 240"
- 12" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- rectangular, racetrack, boatshaped, bow-end and sightline tops- minimum table size: 36" x 72"- maximum table size: 60" x 240"
- 18" deep, 24" deep & 30" deep- 18" wide, 24" wide & 30" wide- 10" x 15-1/2" wire management cutout in top and bottom- square, rectangular, racetrack, boatshaped, bow-end and sightline tops - minimum table size: 36" x 36"- maximum table size: 60" x 240"
offering
details
5554 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BSQR-1-18 36" Square 18 1 $753
CF-BSQR-1-20 42" Square 20 1 $881
CF-BSQR-1-24 48" Square 24 1 $931
CF-BSQR-1-30 54", 60" Square 30 1 $962
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Square bases are hollow with 10" square openings at top and bottom for wire management. - Square bases should not be used with round tops. - Radiused wood edges not available in black or white.
pricing Model Number Price
Table Top Size(s) Base Size Bases
Included
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
grain direction
wire management stretcher trough
Wire management stretcher troughs are 13-1/2" wide x 6-1/2" high, with interior clearance of 12" wide x 5-3/4" high.
optional kickplate colors
For silver metallic, white or matching PVC kickplate add OP-CONF-71 for $133 per base.
table tops for laguna bases
square* rectangular racetrack boatshape bow-end sightline**rectangular/square bases only*square base only
laguna base for square table topslaguna base details
5756 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
laguna panel base
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
CF-BPR4-24-168 48 x 168 24 37 1/4 $2,432
CF-BPR4-30-168 54 x 168, 60 x 168 30 37 1/4 $2,452
CF-BPR4-24-192 48 x 192 24 45 1/4 $2,469
CF-BPR4-30-192 54 x 192, 60 x 192 30 45 1/4 $2,488
CF-BPR4-24-216 48 x 216 24 53 1/4 $2,495
CF-BPR4-30-216 54 x 216, 60 x 216 30 53 1/4 $2,503
CF-BPR3-24-120 48 x 120 24 34 1/2 $1,930
CF-BPR3-24-144 48 x 144 24 46 1/2 $1,946
CF-BPR3-30-144 54 x 144, 60 x 144 30 46 1/2 $1,959
CF-BPR2-20-72 36 x 72 20 32 $1,192
CF-BPR2-20-84 42 x 84 20 38 $1,271
CF-BPR2-24-84 48 x 84 24 38 $1,301
CF-BPR2-20-96 42 x 96 20 50 $1,286
CF-BPR2-24-96 48 x 96 24 50 $1,330
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
CF-BPR5-24-240 48 x 240 24 44 3/4 $3,045
CF-BPR5-30-240 54 x 240, 60 x 240 30 44 3/4 $3,063
5 Bases & 4 Stretchers
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- 5" thick panel bases are hollow with 2.5" x 8" opening at top and a 2.5" grommet at the bottom for wire management. - To place a power/data grommet over a base, add OP-CONF-NOTCH for $347 per base.- Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
Center of 4th Base
36 72 17-1/2 54-1/2
42/48 84 20-1/2 63-1/2
42/48 96 20-1/2 75-1/2
48 120 20-1/2 60 99-1/2
48/54/60 144 20-1/2 72 123-1/2
48/54/60 168 20-1/2 84 147-1/2
48/54/60 192 20-1/2 70-13/16 121-3/16 171-1/2
48/54/60 216 20-1/2 78-13/16 137-7/16 195-1/2
48/54/60 240 20-1/2 70-1/4 120 169-3/4 219-1/2
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
base placement rectangular, racetrack, boatshape and bow-end table tops
1st2nd
3rd4th
5th
Center of 5th Base
For 36" and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
5"
30"
2-3/4"
27-5/8"
2-1/2"
8"
dimensions
5"
24"
2-3/4"
21-5/8"
2-1/2"
8"
5"
20"
2-3/4"
17-5/8"
2-1/2"
8"
Side Elevation
3-1/2"
28-5/8"
5958 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
36 72 18 54
42/48 84 24 60
42/48 96 24 72
48* 120 24 96
48** 120 24 60 96
48/54/60 144 24 72 120
48/54/60 168 24 84 144
48/54/60 192 24 72 120 168
48/54/60 216 24 80 136 192
48/54/60 240 24 88 152 216
base placement rectangular, racetrack, boatshape, bow-end and sightline table tops
*one piece top**two and three piece top
laguna rectangular base
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
CF-BRR4-24-192 48 x 192 24 36 $3,797
CF-BRR4-30-192 54 x 192, 60 x 192 30 36 $3,927
CF-BRR4-24-216 48 x 216 24 44 $3,837
CF-BRR4-30-216 54 x 216, 60 x 216 30 44 $4,087
CF-BRR4-24-240 48 x 240 24 52 $3,938
CF-BRR4-30-240 54 x 240, 60 x 240 30 52 $4,189
CF-BRR3-24-120 48 x 120 (2 & 3 piece top) 24 24 $2,932
CF-BRR3-24-144 48 x 144 24 36 $2,970
CF-BRR3-30-144 54 x 144, 60 x 144 30 36 $3,088
CF-BRR3-24-168 48 x 168 24 48 $3,011
CF-BRR3-30-168 54 x 168, 60 x 168 30 48 $3,129
CF-BRR2-18-72 36 x 72 18 24 $1,637
CF-BRR2-18-84 42 x 84 18 24 $1,671
CF-BRR2-24-84 48 x 84 24 24 $1,938
CF-BRR2-18-96 42 x 96 18 36 $1,704
CF-BRR2-24-96 48 x 96 24 36 $1,970
CF-BRR2-24-120 48 x 120 (1 piece top) 24 60 $2,004
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Rectangular bases are hollow with 10" square opening at top and bottom for wire management. - Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.
For 36" and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
12"
30"
9-3/4"
27-5/8"
10"
15-1/2"
dimensions
Side Elevation
12"
24"
9-3/4"
21-5/8"
10"
15-1/2"
12"
18"
9-3/4"
15-5/8"
10"
15-1/2"
3-1/2"
28-5/8"
6160 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
base placement rectangular, racetrack, boatshape and bow-end table tops
laguna square base
36 72 21 51
42 84 27 57
42 96 27 69
48 96 30 66
48 120 30 90
48 144 30 72 114
48 168 30 84 138
48 192 30 74 118 162
48 216 30 82 134 186
48 240 30 90 150 210
54/60 144 33 72 111
54/60 168 33 84 135
54/60 192 33 75 117 159
54/60 216 33 83 133 183
54/60 240 33 91 149 207
Table Depth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
CF-BQR4-24-192 48 x 192 24 20 $3,863
CF-BQR4-30-192 54 x 192, 60 x 192 30 12 $4,219
CF-BQR4-24-216 48 x 216 24 28 $4,022
CF-BQR4-30-216 54 x 216, 60 x 216 30 20 $4,378
CF-BQR4-24-240 48 x 240 24 36 $4,125
CF-BQR4-30-240 54 x 240, 60 x 240 30 28 $4,480
CF-BQR3-24-144 48 x 144 24 18 $3,021
CF-BQR3-30-144 54 x 144, 60 x 144 30 9 $3,301
CF-BQR3-24-168 48 x 168 24 30 $3,062
CF-BQR3-30-168 54 x 168, 60 x 168 30 21 $3,343
CF-BQR2-18-72 36 x 72 18 12 $1,665
CF-BQR2-18-84 42 x 84 18 12 $1,698
CF-BQR2-18-96 42 x 96 18 24 $1,731
CF-BQR2-24-96 48 x 96 24 12 $2,003
CF-BQR2-24-120 48 x 120 24 36 $2,037
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.
3-1/2"
28-5/8"
Side Elevation
dimensions
For 36"and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
30"
27-3/4"
27-5/8"
10"
10"
24"
24"
21-3/4"
21-5/8"
10"
10"
18"
18"
15-3/4"
15-5/8"
10"
10"
6362 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BQS4-1824-192 60 x 192 18-18-24-24 24 $3,065
CF-BQS4-1824-216 60 x 216 18-18-24-24 32 $3,224
CF-BQS4-1824-240 60 x 240 18-18-24-24 40 $3,326
CF-BQS3-1824-120 60 x 120 (2-piece top) 18-18-24 12 $2,831
CF-BQS3-1824-144 60 x 144 18-18-24 24 $2,872
CF-BQS3-1824-168 60 x 168 18-18-24 36 $2,946
CF-BQS2-1818-96 48 x 96 18-18 24 $1,731
CF-BQS2-1824-96 54 x 96 18-24 18 $1,950
CF-BQS2-1824-120 60 x 120 (1-piece top) 18-24 42 $1,984
CF-BRL4-1830-192 60 x 192 18-24-24-30 36 $3,625
CF-BRL4-1830-216 60 x 216 18-24-24-30 44 $3,786
CF-BRL4-1830-240 60 x 240 18-24-24-30 52 $3,888
CF-BRL3-1830-120 60 x 120 (2-piece top) 18-24-30 24 $2,782
CF-BRL3-1830-144 60 x 144 18-24-30 36 $2,825
CF-BRL3-1830-168 60 x 168 18-24-30 48 $2,866
CF-BRL2-1824-96 48 x 96 18-24 36 $1,841
CF-BRL2-1830-96 54 x 96 18-30 36 $2,054
CF-BRL2-1830-120 60 x 120 (1-piece top) 18-30 60 $2,088
pricing - rectangular bases
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing - square bases
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.
laguna bases for sightline table tops
48 96 24 72
54 96 24 72
60 120 24 96
60 120 24 60 96
60 144 24 72 120
60 168 24 84 144
60 192 24 72 120 168
60 216 24 80 136 192
60 240 24 88 152 216
square base placement sightline table tops
48 96 27 69
54 96 27 66
60 120 27 90
60 120 27 57 90
60 144 27 69 114
60 168 27 81 138
60 192 27 69 114 162
60 216 27 77 130 186
60 240 27 85 146 210
1st2nd
3rd4th
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
rectangular base placement sightline table tops
*one piece top**two and three piece top
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Square bases are hollow with 10" square opening at top and bottom for wire management. - Wood corners not available in white or black, grey or wood tones only. - Shipped in pieces and require assembly.
6564 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
torrance bases
- constructed two of 1-1/8" thick pieces with 1/8" reveal, solid construction, cannot route wires through- recessed kickplate is 3/4" high, standard finish is black - reveal is only available in black- edges are 2mm PVC- standard in TFL, HPL available at an upcharge - all bases are sold as a set with wire management stretcher troughs between bases- middle bases include a wire management grommet hole near top of base - 2-3/8" deep- 20" wide, 24" wide & 30" wide- minimum table size: 36" x 72"- maximum table size: 60" x 240"
details
grain direction
wire management stretcher trough
Wire management stretcher troughs are 13-1/2" wide x 6-1/2" high, with interior clearance of 12" wide x 5-3/4" high.
optional kickplate colors
For silver metallic, white or matching PVC kickplate, add OP-CONF-71 for $133 per base.
table tops for torrance bases
rectangular racetrack boatshape bow-end
6766 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BPS4-24-168 48 x 168 24 40 3/4 $652
CF-BPS4-30-168 54 x 168, 60 x 168 30 40 3/4 $694
CF-BPS4-24-192 48 x 192 24 48 3/4 $659
CF-BPS4-30-192 54 x 192, 60 x 192 30 48 3/4 $701
CF-BPS4-24-216 48 x 216 24 56 3/4 $666
CF-BPS4-30-216 54 x 216, 60 x 216 30 56 3/4 $706
CF-BPS3-24-120 48 x 120 24 38 1/2 $575
CF-BPS3-24-144 48 x 144 24 50 1/2 $582
CF-BPS3-30-144 54 x 144, 60 x 144 30 50 1/2 $589
CF-BPS2-20-72 36 x 72 20 37 1/4 $402
CF-BPS2-20-84 42 x 84 20 43 1/4 $408
CF-BPS2-24-84 48 x 84 24 43 1/4 $424
CF-BPS2-20-96 42 x 96 20 55 1/4 $415
CF-BPS2-24-96 48 x 96 24 55 1/4 $436
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
CF-BPS5-24-240 48 x 240 24 48 1/4 $768
CF-BPS5-30-240 54 x 240, 60 x 240 30 48.25 $821
5 Bases & 4 Stretchers
- Includes 3/4" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Not available with wire access door.- Shipped in pieces and require assembly.
torrance bases
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
Center of 4th Base
36 72 16-3/16 55-13/16
42/48 84 19-3/16 64-13/16
42/48 96 19-3/16 76-13/16
48 120 19-3/16 60 100-13/16
48/54/60 144 19-3/16 72 124-13/16
48/54/60 168 19-3/16 62-3/8 105-6/8 148-13/16
48/54/60 192 19-3/16 70-3/8 121-5/8 172-13/16
48/54/60 216 19-3/16 78-3/8 137-5/8 196-13/16
48/54/60 240 19-3/16 69-5/8 120 170-7/16 220-13/16
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
base placement rectangular, racetrack, boatshape and bow-end table tops
Center of 5th Base
1st2nd
3rd4th
5th
For 36" and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
dimensions
2-3/8"
20"
Side Elevation
3-1/2"
28-5/8"13-1/2"
2-3/8"
24" 13-1/2"
2-3/8"
30"13-1/2"
6968 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
imperial bases
- constructed two of 1-1/8" thick pieces with 1/8" reveal- recessed kickplate is 3/4" high, standard finish is black - reveal is only available in black- edges are 2mm PVC- standard in TFL, HPL available at an upcharge - all bases are sold as a set with wire management stretcher troughs between bases- middle bases include a wire management grommet hole near top of base - hollow construction allows wires to pass through- 5" x 9" wire management cutout in top and bottom- 9" deep- 20" wide, 24" wide & 30" wide- minimum table size: 36" x 72"- maximum table size: 60" x 240"
details
grain direction
wire management stretcher trough
Wire management stretcher troughs are 13-1/2" wide x 6-1/2" high, with interior clearance of 12" wide x 5-3/4" high.
optional kickplate colors
For silver metallic, white or matching PVC kickplate add OP-CONF-71 for $133 per base.
table tops for imperial bases
rectangular racetrack boatshape bow-end
7170 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BBT4-24-192 48 x 192 24 40 $3,536
CF-BBT4-30-192 54 x 192, 60 x 192 30 40 $3,900
CF-BBT4-24-216 48 x 216 24 48 $3,574
CF-BBT4-30-216 54 x 216, 60 x 216 30 48 $4,059
CF-BBT4-24-240 48 x 240 24 56 $3,676
CF-BBT4-30-240 54 x 240, 60 x 240 30 56 $4,162
CF-BBT3-24-120 48 x 120 24 28 1/2 $2,766
CF-BBT3-24-144 48 x 144 24 40 1/2 $2,807
CF-BBT3-30-144 54 x 144, 60 x 144 30 40 1/2 $3,095
CF-BBT3-24-168 48 x 168 24 52 1/2 $2,848
CF-BBT3-30-168 54 x 168, 60 x 168 30 52 1/2 $3,137
CF-BBT2-20-72 36 x 72 20 30 $1,670
CF-BBT2-20-84 42 x 84 20 30 $1,705
CF-BBT2-24-84 48 x 84 24 30 $1,828
CF-BBT2-20-96 42 x 96 20 42 $1,737
CF-BBT2-24-96 48 x 96 24 42 $1,860
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Boatshaped bases are hollow with 5" x 9" opening at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.
OP-CONF-57 for one base $707
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
optional wire access door Model Number PriceBases
Included
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
imperial bases
36 72 16-1/2 55-1/2
42/48 84 22-1/2 61-1/2
42/48 96 22-1/2 73-1/2
48 120 22-1/2 60 97-1/2
48/54/60 144 22-1/2 72 121-1/2
48/54/60 168 22-1/2 84 145-1/2
48/54/60 192 22-1/2 71-1/2 120-1/2 169-1/2
48/54/60 216 22-1/2 79-1/2 136-1/2 193-1/2
48/54/60 240 22-1/2 87-1/2 152-1/2 217-1/2
base placement rectangular, racetrack, boatshape and bow-end table tops
1st2nd
3rd4th
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
For 36" and 42" Deep Table Tops
For 48" Deep Table Tops
For 54" and 60" Deep Table Tops
dimensions
Side Elevation
3-1/2"
28-5/8"
5"
30"
4-1/4"
29"
8"
9"
9"
5"
24"
4-1/4"
23"
8"
9"
9"
5"
18"
4-1/4"
17"
8"
9"
9"
7372 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
komo bases
- constructed HPL wrapped hollow cylinder- recessed kickplate is 1-1/8" high, standard finish is black - reveal is only available in black- standard in HPL, TFL is not available - hollow construction allows wires to pass through- all bases are sold as a set with wire management stretcher troughs between bases- middle bases include a wire management grommet hole near top of base
details
half cylindercylinder
- 18" diameter, 24" diameter & 30" diameter- 10" diameter wire management cutout in top and bottom- round, rectangular, racetrack, boatshaped and bow-end tops only- minimum table size: 36" x 72"- maximum table size: 60" x 240" or 60" diameter round
- depth varies- 18" wide, 24" wide & 30" wide- wire management cutout in top and bottom- rectangular, racetrack, boatshaped and bow-end tops only- minimum table size: 42" x 84"- maximum table size: 60" x 168"
offering
7574 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BCYL-1-18 36", 42" Round 18 1 $524
CF-BCYL-1-24 42", 48" or 54" Round 24 1 $746
CF-BCYL-1-30 54" or 60" Round 30 1 $870
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Cylinder bases are hollow with 10" diameter openings at top and bottom for wire management. - 42" round top on 18" cylinder base and 54" round top on 24" cylinder base will require additional weight (50 pounds minimum) inside the base for stability and to prevent tipping. Sand bags NOT provided. - Cylinder bases should not be used with square tops. - Not all standard TFL finishes are available in matching HPL, see page 4 for availability.
komo base for round table tops
Model Number Price
Table Top Size(s) Base Size Bases
Included
pricing
OP-CONF-55 for one base $575
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
optional wire access door Model Number PriceBases
Included
wire management stretcher trough
Wire management stretcher troughs are 13-1/2" wide x 6-1/2" high, with interior clearance of 12" wide x 5-3/4" high.
optional kickplate colors
For silver metallic, white or matching PVC kickplate add OP-CONF-71 for $133 per base.
grain direction
table tops for komo bases
rectangular racetrack boatshape bow-endround
komo base details
7776 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BCY3-24-144 48 x 144 24 18 $2,382
CF-BCY3-30-144 54 x 144, 60 x 144 30 9 $2,725
CF-BCY3-24-168 48 x 168 24 30 $2,423
CF-BCY3-30-168 54 x 168, 60 x 168 30 21 $2,765
CF-BCY4-24-192 48 x 192 24 42 $2,463
CF-BCY4-30-192 54 x 192, 60 x 192 30 33 $2,806
36 72 21 51
42 84 27 57
42 96 27 69
48 96 30 66
48 120 30 90
48 144 30 72 114
48 168 30 84 138
48 192 30 96 162
48 216 30 82 134 186
48 240 30 90 150 210
54/60 144 33 72 111
54/60 168 33 84 135
54/60 192 33 96 159
54/60 216 33 83 133 183
54/60 240 33 91 149 207
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
1st2nd
3rd4th
For 36" and 42" Deep Table Tops
18-1/2"
18"
For 48" Deep Table Tops
24-5/8"
24-1/8"
For 54" and 60" Deep Table Tops
30-3/4"
30-1/4"
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
komo cylinder base
dimensions
base placement rectangular, racetrack, boatshape and bow-end table tops
CF-BCY4-24-216 48 x 216 24 28 $3,347
CF-BCY4-30-216 54 x 216, 60 x 216 30 20 $3,942
CF-BCY4-24-240 48 x 240 24 36 $3,449
CF-BCY4-30-240 54 x 240, 60 x 240 30 28 $4,045
CF-BCY2-18-72 36 x 72 18 12 $1,198
CF-BCY2-18-84 42 x 84 18 12 $1,233
CF-BCY2-18-96 42 x 96 18 24 $1,265
CF-BCY2-24-96 48 x 96 24 12 $1,387
CF-BCY2-24-120 48 x 120 24 36 $1,422
2 Bases & 1 Stretcher
3 Bases & 2 Stretchers
4 Bases & 3 Stretchers
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Cylinder bases are hollow with 10" diameter openings at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.
OP-CONF-55 for one base $575
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
optional wire access door Model Number PriceBases
Included
10"
10"
10"
Side Elevation
3-1/2"
28-5/8"
7978 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
Side Elevation
3-1/2"
28-5/8"
48" Deep Table Tops
24-3/8"
11"
12-1/4"
23-1/4"
For 54" and 60" Deep Table Tops
30"
13-3/4"
15"
29"
42 84 19 65
42 96 19 77
48 96 24 72
1st2nd
CF-BHC2-20-84 42 x 84 20 36 $1,233
CF-BHC2-20-96 42 x 96 20 48 $1,265
CF-BHC2-24-96 48 x 96 24 36 $1,384
2 Bases & 1 Stretcher
- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Half-cylinder bases are hollow with openings at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
komo half cylinder base
dimensions
base placement rectangular, racetrack, boatshape and bow-end table tops
optional wire access door Model Number Price
OP-CONF-51 for one base $515
- Door will be placed near the center of the base. Door is approximately 12" x 12". - Also includes wire management grommet hole near top of base.
BasesIncluded
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
CF-BCC3-24-120 48 x 120 24 18 $1,904
CF-BCC3-24-144 48 x 144 24 30 $2,250
CF-BCC3-30-144 54 x 144, 60 x 144 30 24 $2,556
CF-BCC3-24-168 48 x 168 24 42 $2,291
CF-BCC3-30-168 54 x 168, 60 x 168 30 36 $2,597
3 Bases & 2 Stretchers
- Tables over 168" long require full cylinder bases.- Includes 1-1/8" high black kickplate and leveling glides.- Add OP-CONF-71 for $133 per base to upgrade kickplate to silver metallic, white or matching PVC.- Bases are hollow with openings at top and bottom for wire management. - Troughs are 13.5" wide x 6.5" high, with interior clearance of 12" wide x 5.75" high.- To place a power/data grommet over a base, add OP-CONF-NOTCH for $361 per base.- Shipped in pieces and require assembly.- Not all standard TFL finishes are available in matching HPL, see page 4 for availability.
Model Number Price
Table Top Size(s) Base Size Stretcher
Length
pricing
48 120 24 60 96
48 144 24 72 120
48 168 24 84 144
54/60 144 25-1/2 72 118-1/2
54/60 168 25-1/2 84 142-1/2
1st2nd
3rd
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
42" Deep Table Tops
20-3/8"
9"
10-1/4"
19-1/4"
6-1/2"
14-1/4"
8-1/4"
18-1/4"24"
11-1/4"
8180 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
hermosa bases
- constructed two of 1-1/8" thick pieces - edges are 2mm PVC- standard in TFL, HPL available at an upcharge - solid construction, cannot route wires through- Includes levelers- 18" deep, 24" deep & 30" deep- 18" wide, 24" wide & 30" wide- minimum table size: 30" x 30"- maximum table size: 60" x 60"
details orientation for mounting laminate x-bases on square table tops
table tops for hermosa bases
squareround
CF-BLMX-18 30" 18 1 $191
CF-BLMX-24 36", 42", 48" 24 1 $222
CF-BLMX-30 54" & 60" 30 1 $347
- Includes leveling glides.- Not available with wire access door.
Model Number Price
Table Top Size(s) Base Size Bases
Included
pricing
top plate for mounting
grain direction
For 30" Deep Table Tops
18"
For 36", 42" and 48" Deep Table Tops
24" 24"18"
For 54" and 60" Deep Table Tops
30" 30"
dimensions
Side Elevation
28-5/8"
8382 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
36 72 16-1/4 55-3/4
42/48 84 19-1/4 64-3/4
42/48 96 19-1/4 79-3/4
48 120 19-1/4 60 100-3/4
48/54/60 144 19-1/4 72 124-3/4
48/54/60 168 19-1/4 62-7/16 105-9/16 148-3/4
48/54/60 192 19-1/4 70-7/16 121-9/16 172-3/4
48/54/60 216 19-1/4 63-5/8 108 152-3/8 196-3/4
48/54/60 240 19-1/4 69-5/8 120 170-3/8 220-3/4
surfside bases
- Metal open frame support legs are sold as sets with spanning rods. - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Includes leveling glides. Levelers will add 3/4" in height.- Metal open frame support legs are sold as sets with spanning rods. - 19" wide, 24" wide, 30" wide & 36" wide- rectangular, racetrack, boatshaped and bow-end tops- minimum table size: 36" x 72"; maximum table size: 60" x 240"
2-1/2"
For 36" and 42" Deep Table Tops
18-3/4"
For 48" Deep Table Tops
2-1/2"
23-3/4"
For 54" Deep Table Tops
2-1/2"
29-3/4"
For 60" Deep Table Tops
2-1/2"
35-3/4"
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
Center of 5th Base
1st2nd
3rd4th
5th
base placement rectangular, racetrack, boatshape and bow-end table tops
details
dimensions
premium - 10% upcharge (OP-COLOR)
silver black white
standard
finishes
28-3/4"
Side Elevation
table tops for surfside bases
rectangular racetrack boatshape bow-end
raw steel
8584 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
36 72 16-1/4 55-3/4
42/48 84 19-1/4 64-3/4
42/48 96 19-1/4 79-3/4
48 120 19-1/4 60 100-3/4
48/54/60 144 19-1/4 72 124-3/4
48/54/60 168 19-1/4 62-7/16 105-9/16 148-3/4
48/54/60 192 19-1/4 70-7/16 121-9/16 172-3/4
48/54/60 216 19-1/4 63-5/8 108 152-3/8 196-3/4
48/54/60 240 19-1/4 69-5/8 120 170-3/8 220-3/4
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
Center of 5th Base
base placement rectangular, racetrack, boatshape and bow-end table tops
1st2nd
3rd4th
5th
dimensions
5"
11-7/8"
12"
wire management basessurfside and sunset series
- include metal mounting brackets and adjustable glides.- hinged access doors both sides.- edges are standard 2MM PVC edgebanding.- rolled stainless steel can be added to the doors, edges with rolled steel finish are 2MM PVC.- laminate wire-management bases are not available with kickplate.
details
5"
5"
12"
21-1/4" 12"
For 36", 42" and 48" Deep Table Tops
For 54" and 60" Deep Table Tops
SY-WMBT-0836 8 36 2 $104
SY-WMBT-0842 8 42 2 $109
SY-WMBT-0848 8 48 2 $138
SY-WMBT-0860 8 60 2 $153
SY-WMBT-0872 8 72 2 $160
- Includes mounting brackets.- Chrome finish only.
Model Number PriceWidth Length Height
wire management baskets
28-7/16"
Side Elevation
22-1/2"
grain direction
8786 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-OLGW-24-216 48 x 216 24 43 3/4 $4,153
CF-OLGW-30-216 54 x 216 30 43 3/4 $4,176
CF-OLGW-36-216 60 x 216 36 43 3/4 $4,187
CF-OLGW-24-240 48 x 240 24 49 3/4 $4,244
CF-OLGW-30-240 54 x 240 30 49 3/4 $4,267
CF-OLGW-36-240 60 x 240 36 49 3/4 $4,279
CF-OLGW-24-168 48 x 168 24 43 $3,079
CF-OLGW-30-168 54 x 168 30 43 $3,102
CF-OLGW-36-168 60 x 168 36 43 $3,114
CF-OLGW-24-192 48 x 192 24 50 1/4 $3,169
CF-OLGW-30-192 54 x 192 30 50 1/4 $3,192
CF-OLGW-36-192 60 x 192 36 50 1/4 $3,203
CF-OLGW-19-72 36 x 72 19 18 1/2 $1,855
CF-OLGW-19-84 42 x 84 19 21 1/2 $1,898
CF-OLGW-24-84 48 x 84 24 21 1/2 $1,910
CF-OLGW-19-96 42 x 96 19 27 1/2 $1,919
CF-OLGW-24-96 48 x 96 24 27 1/2 $1,930
CF-OLGW-24-120 48 x 120 24 39 1/2 $2,061
CF-OLGW-24-144 48 x 144 24 51 1/2 $2,103
CF-OLGW-30-144 54 x 144 30 51 1/2 $2,126
CF-OLGW-36-144 60 x 144 36 51 1/2 $2,137
CF-OLG1-24-216 48 x 216 24 41 3/4 $3,004
CF-OLG1-30-216 54 x 216 30 41 3/4 $3,061
CF-OLG1-36-216 60 x 216 36 41 3/4 $3,090
CF-OLG1-24-240 48 x 240 24 47 3/4 $3,095
CF-OLG1-30-240 54 x 240 30 47 3/4 $3,153
CF-OLG1-36-240 60 x 240 36 47 3/4 $3,182
CF-OLG1-24-168 48 x 168 24 40 3/4 $2,314
CF-OLG1-30-168 54 x 168 30 40 3/4 $2,359
CF-OLG1-36-168 60 x 168 36 40 3/4 $2,383
CF-OLG1-24-192 48 x 192 24 48 3/4 $2,403
CF-OLG1-30-192 54 x 192 30 48 3/4 $2,449
CF-OLG1-36-192 60 x 192 36 48 3/4 $2,471
CF-OLG1-24-120 48 x 120 24 38 1/4 $1,679
CF-OLG1-24-144 48 x 144 24 50 1/4 $1,720
CF-OLG1-30-144 54 x 144 30 50 1/4 $1,754
CF-OLG1-36-144 60 x 144 36 50 1/4 $1,772
CF-OLG1-19-72 36 x 72 19 37 $944
CF-OLG1-19-84 42 x 84 19 43 $989
CF-OLG1-24-84 48 x 84 24 43 $999
CF-OLG1-19-96 42 x 96 19 55 $1,009
CF-OLG1-24-96 48 x 96 24 55 $1,020
2 Bases & 2 Spanning Rods
3 Bases & 4 Spanning Rods
4 Bases & 6 Spanning Rods
5 Bases & 8 Spanning Rods
- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional colors or chrome finish, please contact Customer Service for upcharge.
3 Bases & 4 Spanning Rods
4 Bases & 6 Spanning Rods
5 Bases & 8 Spanning Rods
- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional metal colors or chrome finish, please contact Customer Service for upcharge. - Wire management bases include metal mounting brackets and adjustable glides.- Wire management bases include hinged access doors both sides.- Edges of wire management bases are DeskMakers standard 2MM PVC edgebanding.- For rolled stainless steel to the doors only, add AC-OPTN-BOX-STL for $519. Edges with rolled steel finish are 2MM PVC.- Laminate wire-management bases are not available with kickplate.
Model Number Price
Table Top Size Base Size Spanning Rod
Length
pricing
surfside bases surfside with wire management base
Model Number Price
Table Top Size Base Size Spanning Rod
Length
pricing
8988 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
sunset bases
2-1/2"
For 36" and 42" Deep Table Tops
18-3/4"
For 48" Deep Table Tops
For 54" Deep Table Tops
For 60" Deep Table Tops
28-5/8"
2-1/2"
23-3/4"33-5/8"
2-1/2"
29-3/4"39-5/8"
2-1/2"
35-3/4"45-5/8"
36 72 16-1/4 55-3/4
42/48 84 19-1/4 64-3/4
42/48 96 19-1/4 79-3/4
48 120 19-1/4 60 100-3/4
48/54/60 144 19-1/4 72 124-3/4
48/54/60 168 19-1/4 62-7/16 105-9/16 148-3/4
48/54/60 192 19-1/4 70-7/16 121-9/16 172-3/4
48/54/60 216 19-1/4 63-5/8 108 152-3/8 196-3/4
48/54/60 240 19-1/4 69-5/8 120 170-3/8 220-3/4
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
Center of 5th Base
1st2nd
3rd4th
5th
base placement rectangular, racetrack, boatshape and bow-end table tops
dimensions
raw steel
- Metal A-rame support legs are sold as sets with spanning rods. - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Includes leveling glides. Levelers will add 3/4" in height.- Metal open frame support legs are sold as sets with spanning rods. - 19" wide, 24" wide, 30" wide & 36" wide- rectangular, racetrack, boatshaped and bow-end tops- minimum table size: 36" x 72"; maximum table size: 60" x 240"
premium - 10% upcharge (OP-COLOR)
details
silver black white
standard
finishes
28-7/16"
Side Elevation
table tops for sunset bases
rectangular racetrack boatshape bow-end
9190 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-ALGW-34-216 48 x 216 24/34 43 3/4 $4,102
CF-ALGW-40-216 54 x 216 30/40 43 3/4 $4,125
CF-ALGW-46-216 60 x 216 36/46 43 3/4 $4,136
CF-ALGW-34-240 48 x 240 24/34 49 3/4 $4,194
CF-ALGW-40-240 54 x 240 30/40 49 3/4 $4,217
CF-ALGW-46-240 60 x 240 36/46 49 3/4 $4,229
CF-ALGW-34-168 48 x 168 24/34 43 $3,030
CF-ALGW-40-168 54 x 168 30/40 43 $3,052
CF-ALGW-46-168 60 x 168 36/46 43 $3,064
CF-ALGW-34-192 48 x 192 24/34 50 1/4 $3,119
CF-ALGW-40-192 54 x 192 30/40 50 1/4 $3,142
CF-ALGW-46-192 60 x 192 36/46 50 1/4 $3,153
CF-ALGW-29-72 36 x 72 19/29 18 1/2 $1,804
CF-ALGW-29-84 42 x 84 19/29 21 1/2 $1,848
CF-ALGW-34-84 48 x 84 24/34 21 1/2 $1,860
CF-ALGW-29-96 42 x 96 19/29 27 1/2 $1,869
CF-ALGW-34-96 48 x 96 24/34 27 1/2 $1,880
CF-ALGW-34-120 48 x 120 24/34 39 1/2 $2,011
CF-ALGW-34-144 48 x 144 24/34 51 1/2 $2,052
CF-ALGW-40-144 54 x 144 30/40 51 1/2 $2,075
CF-ALGW-46-144 60 x 144 36/46 51 1/2 $2,086
CF-ALG1-34-216 48 x 216 24/34 41 3/4 $2,954
CF-ALG1-40-216 54 x 216 30/40 41 3/4 $3,011
CF-ALG1-46-216 60 x 216 36/46 41 3/4 $3,039
CF-ALG1-34-240 48 x 240 24/34 47 3/4 $3,045
CF-ALG1-40-240 54 x 240 30/40 47 3/4 $3,102
CF-ALG1-46-240 60 x 240 36/46 47 3/4 $3,131
CF-ALG1-34-168 48 x 168 24/34 40 3/4 $2,263
CF-ALG1-40-168 54 x 168 30/40 40 3/4 $2,309
CF-ALG1-46-168 60 x 168 36/46 40 3/4 $2,332
CF-ALG1-34-192 48 x 192 24/34 48 3/4 $2,352
CF-ALG1-40-192 54 x 192 30/40 48 3/4 $2,398
CF-ALG1-46-192 60 x 192 36/46 48 3/4 $2,421
CF-ALG1-34-120 48 x 120 24/34 38 1/4 $1,628
CF-ALG1-34-144 48 x 144 24/34 50 1/4 $1,669
CF-ALG1-40-144 54 x 144 30/40 50 1/4 $1,704
CF-ALG1-46-144 60 x 144 36/46 50 1/4 $1,721
CF-ALG1-29-72 36 x 72 19/29 37 $894
CF-ALG1-29-84 42 x 84 19/29 43 $938
CF-ALG1-34-84 48 x 84 24/34 43 $950
CF-ALG1-29-96 42 x 96 19/29 55 $959
CF-ALG1-34-96 48 x 96 24/34 55 $970
2 Bases & 2 Spanning Rods
3 Bases & 4 Spanning Rods
4 Bases & 6 Spanning Rods
5 Bases & 8 Spanning Rods
3 Bases & 4 Spanning Rods
4 Bases & 6 Spanning Rods
5 Bases & 8 Spanning Rods
Model Number Price
Table Top Size Base Size Spanning Rod
Length
pricing
sunset bases sunset with wire management base
Model Number Price
Table Top Size Base Size Spanning Rod
Length
pricing
- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional colors or chrome finish, please contact Customer Service for upcharge.
- Includes leveling glides.- Legs are constructed of 1" thick x 2-1/2" deep steel frame with a silver powdercoat finish.- Spanning rods are approximately 1" square steel with a powdercoat finish.- Dimensions are nominal.- For additional metal colors or chrome finish, please contact Customer Service for upcharge. - Wire management bases include metal mounting brackets and adjustable glides.- Wire management bases include hinged access doors both sides.- Edges of wire management bases are DeskMakers standard 2MM PVC edgebanding.- For rolled stainless steel to the doors only, add AC-OPTN-BOX-STL for $519. Edges with rolled steel finish are 2MM PVC.- Laminate wire-management bases are not available with kickplate.
9392 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-RDDK-01-20-??? 30" or 36" round or 30" square 27 3/4 20 1 $647
CF-RDDK-01-24-??? 42" round or 36" square 27 3/4 24 1 $686
CF-RDDK-01-32-??? 48" round or 42" square 27 3/4 32 1 $816
Desk Height
CF-RDDK-05-20-??? 30" or 36" round or 30" square 40 3/4 20 1 $735
CF-RDDK-05-24-??? 42" round or 36" square 40 3/4 24 1 $774
CF-RDDK-05-32-??? 48" round or 42" square 40 3/4 32 1 $904
Standing Height
beacon base
- tables tops are sold separately- 3" diameter column on 20" base, 4" diameter column on 24" and 32"- glides have 1/8" adjustability and raise the base 1/4" above the floor- top and bottom plates are bolted to column, field assembly required- powdercoat finish- available in occasional, desk and standing heights
details
dimensions
27-3/4"
Desk Height
40-3/4"
Standing Height
details
table tops for use with beacon bases
Maximum 48" Round Table Top
Maximum 48" x 96" one piece Table Top
silver black white
finishes
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
12"
12"32"
32"
12"
12"24"
24"
10"
10"20"
20"
For 48" Round or 42" Square Table Tops
For 42" Round or 36" Square Table Tops
For 30" and 36" Round or 30" Square Table Tops
9594 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
beacon power base
- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- 3" diameter column on 20" base, 4" diameter column on 24" and 32"- top plate allows for centered power grommet- glides have 1/8" adjustability and raise the base 1/4" above the floor- top and bottom plates are bolted to column, field assembly required- powdercoat finish- available in occasional, desk and standing heights
detailsdetails
table tops for use with beacon bases
Maximum 48" Round Table Top
Maximum 48" x 96" one piece Table Top
silver black white
finishes 2-13/16"
6-5/8"
dimensions
27-3/4"
Desk Height
40-3/4"
Standing Height
compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND - AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-RDDK-EL01-20-??? 30" or 36" round or 30" square 27 3/4 20 1 $843
CF-RDDK-EL01-24-??? 42" round or 36" square 27 3/4 24 1 $882
CF-RDDK-EL01-28-??? 48" round or 42" square 27 3/4 32 1 $1,012
Desk Height
CF-RDDK-EL05-20-??? 30" or 36" round or 30" square 40 3/4 20 1 $931
CF-RDDK-EL05-24-??? 42" round or 36" square 40 3/4 24 1 $970
CF-RDDK-EL05-28-??? 48" round or 42" square 40 3/4 32 1 $1,100
Standing Height
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
12"
12"32"
32"
12"
12"24"
24"
12"
12"20"
20"
For 48" Round or 42" Square Table Tops
For 42" Round or 36" Square Table Tops
For 30" and 36" Round or 30" Square Table Tops
9796 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
mission base
details
For 48" Round or 42" Square Table Tops
12"
12"26"
dimensions
27-3/4"
table tops for use with mission bases
Maximum 48" Round Table Top
Maximum 48" x 96" one piece Table Top
Maximum 42" Square Table Top
silver black white
finishes
Desk Height
40-3/4"
Standing Height
26"
12"
12"20"
20"
10"
10"16"
16"
For 42" Round or 36" Square Table Tops
For 30" and 36" Round or 30" Square Table Tops
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-SQDK-01-16-??? 30" or 36" round or 30" square 27 3/4 16 1 $647
CF-SQDK-01-20-??? 42" round or 36" square 27 3/4 20 1 $686
CF-SQDK-01-26-??? 48" round or 42" square 27 3/4 26 1 $816
Desk Height
CF-SQDK-05-16-??? 30" or 36" round or 30" square 40 3/4 16 1 $735
CF-SQDK-05-20-??? 42" round or 36" square 40 3/4 20 1 $774
CF-SQDK-05-26-??? 48" round or 42" square 40 3/4 26 1 $904
Standing Height
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
- tables tops are sold separately- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights
9998 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
mission power base
detailsdetails
table tops for use with beacon bases
silver black white
finishes2-13/16"
6-5/8"
dimensions
27-3/4"
Desk Height
40-3/4"
Standing Height
compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND - AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-SQDK-EL01-16-??? 30" or 36" round or 30" square 27 3/4 16 1 $843
CF-SQDK-EL01-20-??? 42" round or 36" square 27 3/4 20 1 $882
CF-SQDK-EL01-26-??? 48" round or 42" square 27 3/4 26 1 $1,012
Desk Height
CF-SQDK-EL05-16-??? 30" or 36" round or 30" square 40 3/4 16 1 $931
CF-SQDK-EL05-20-??? 42" round or 36" square 40 3/4 20 1 $970
CF-SQDK-EL05-26-??? 48" round or 42" square 40 3/4 26 1 $1,100
Standing Height
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
Maximum 48" Round Table Top
Maximum 48" x 96" one piece Table Top
Maximum 42" Square Table Top
For 48" Round or 42" Square Table Tops
12"
12"26"
26"
12"
12"20"
20"
10"
10"16"
16"
For 42" Round or 36" Square Table Tops
For 30" and 36" Round or 30" Square Table Tops
- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- top plate allows for centered power grommet- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights
101100 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BMMX-05-24-??? 24 & 30" round & square 40 3/4 26 1 $468 $534
CF-BMMX-05-30-??? 36" & 42" round & square 40 3/4 32 1 $521 $587
CF-BMMX-05-60-??? 48" round & square; 54" & 60" round 40 3/4 38 1 $568 $634
newport base
details- 3" diameter column and feet are 1-7/8" diameter- fully welded construction of top plate to column- x-base is bolted to column, field assembly required- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights
orientation for mounting x-bases on square table tops
27-3/4"
For 48" Round/Square and 54" & 60" Round Table Tops
12"
12"38"
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
CF-BMMX-01-24-??? 24 & 30" round & square 27 3/4 26 1 $381 $447
CF-BMMX-01-30-??? 36" & 42" round & square 27 3/4 32 1 $434 $500
CF-BMMX-01-60-??? 48" round & square; 54" & 60" round 27 3/4 38 1 $481 $547
silver black white
finishes
dimensions
For 36" and 42" Table Tops
pricing Model Number Black
Table Top Size Base Size Bases
Included Silver/WhiteBase Height
Desk Height
38"
For 24" and 30" Table Tops
12"
12"32"
32"
12"
12"26"
26"
40-3/4"
Desk Height Standing Height
Standing Height
table tops for newport x-bases
squareround
103102 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
cabrillo base
details
orientation for mounting x-bases on square table tops
- 3" diameter column and feet are 1-1/2" diameter- fully welded construction of top plate to column- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights
12"
12"38"
For 48" and 54" Round and 42" Square Table Tops
CF-ARTB-05-??? 36" or 42" round; 36" square 40 3/4 32 1 $556 $623
CF-ARTB-06-??? 48" or 54" round; 42" square 40 3/4 38 1 $642 $708
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
CF-ARTB-01-??? 36" or 42" round; 36" square 27 3/4 32 1 $496 $562
CF-ARTB-02-??? 48" or 54" round; 42" square 27 3/4 38 1 $543 $610
pricing
Model Number Black
Table Top Size Base Size Bases
Included Silver/WhiteBase Height
Desk Height
Standing Height
dimensions
27-3/4"
pricing
40-3/4"
Desk Height Standing Height
38"
12"
12"32"
For 36" and 42" Round and 36" Square Table Tops
32"
silver black white
finishes
table tops for cabrillo bases
squareround
105104 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
venice bases
power grommet x-basex-base 4 post x-base
- 2-1/4" column- 27-3/4" high and 40-3/4" without table top- maximum table size: 54" diameter or 42" square
- 2-1/4" column- 27-3/4" high without table top- maximum table size: 54" diameter or 42" square - top plate allows for centered power grommet
- (4) 2-1/4" columns- 27-3/4" high without table top- maximum table size: 60" diameter or 54" square
offering
extended y-basey-base double t-base
- 2-1/4" column- 27-3/4" high without table top- maximum table size: 48" x 96"- metal stretcher included
- (2) 2-1/4" columns- 27-3/4" high without table top- maximum table size: 60" x 240"- metal stretchers included
- (2) 2-1/4" columns- 27-3/4" high without table top- maximum table size: 60" x 240"
silver black white
polished chrome
standard - powdercoat
premium
finishes
details- 2-1/4" diameter steel column and feet are cast aluminum- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
brushed chrome
Cast aluminum feet are and aluminum hortizontal stretchers are polished/brushed aluminum. Steel columns are chrome/brushed finish.
Premium finishes can have a multifinish look combining powdercoat columns or feet with polished/brushed column or feet.
107106 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
ML-PRPL-05-26-??? 30" & 36" round; or 30" square 40 3/4 26 1 $667 $726
ML-PRPL-05-33-??? 42" round; or 36" square 40 3/4 32 3/4 1 $693 $752
ML-PRPL-05-38-??? 48" & 54" round; or 42" square 40 3/4 38 1/4 1 $783 $846
ML-PRPL-01-26-??? 30" & 36" round; or 30" square 27 3/4 26 1 $596 $655
ML-PRPL-01-33-??? 42" round; or 36" square 27 3/4 32 3/4 1 $622 $681
ML-PRPL-01-38-??? 48" & 54" round; or 42" square 27 3/4 38 1/4 1 $713 $776
venice x-base
details- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - available in occasional, desk and standing heights- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel - available in occasional, desk and standing heights
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
12"
12"38-1/4"
For 48" and 54" Round and 42" Square Table Tops
27-3/4"
Desk Height
38-1/4"
For 42" Round and 36" Square Table Tops
12"
12"32-3/4"
32-3/4"
12"
12"26"
26"
For 30" and 36" Round and 30" Square Table Tops
dimensions
pricing Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
40-3/4"
Standing Heightorientation for mounting x-bases on square table tops
table tops for venice x-bases
squareround
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
Desk Height
Standing Height
109108 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
dimensions
details
pricing - desk height
ML-PRPL-EL01-26-??? 30" & 36" round; or 30" square 27 3/4 26 1 $908 $967
ML-PRPL-EL01-33-??? 42" round; or 36" square 27 3/4 32 3/4 1 $934 $993
ML-PRPL-EL01-38-??? 48" & 54" round; or 42" square 27 3/4 38 1/4 1 $1,024 $1,087
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
12"
12"38-1/4"
For 48" and 54" Round and 42" Square Table Tops
27-3/4"
Desk Height
38-1/4"
For 42" Round and 36" Square Table Tops
12"
12"32-3/4"
32-3/4"
12"
12"26"
26"
For 30" and 36" Round and 30" Square Table Tops
wire management
venice power x-base
- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - welded cone top plate allows for centered power grommet- grommet access hole above feet, includes plastic grommet cover- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
orientation for mounting x-bases on square table tops
table tops for venice x-bases
squareround
2-3/4"
10-1/4"
3-1/8"
compliant electrical units - AC-ELCV-1RND - AC-ELCV-2RND - AC-ELCV-01, AC-ELCV-02, AC-ELCV-06, AC-ELCV-07- AC-ELCV-MINI- AC-PWRG-02- AC-PWRG-03
111110 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
ML-PRPL-04-38-??? 60" round; or 48" square 27 3/4 38 1 $1,260 $1,541
ML-PRPL-04-46-??? 54" square 27 3/4 46 1 $1,300 $1,581
venice 4 post x-base
5"
5"32-5/8"
For 60" Round and 54" Square Table Tops
27-3/4"
Desk Height
32-5/8"
dimensions
pricing
Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
46"
5"
5"28"
For 54" and 60" Round and 48" Square Table Tops
28"38"
details- (4) 2-1/4" steel columns and feet are cast aluminum- maximum table size: 60" diameter or 54" square - 27-3/4" high without table top- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
table tops for venice 4 post x-bases
squareround
113112 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
venice y-base
details
- 2-1/4" steel column and feet are cast aluminum- 27-3/4" high without table top- maximum table size: 48" x 96"- metal stretcher included
dimensions
table tops for venice y-bases
rectangular racetrack boatshape bow-end
y-base
double y-base
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
y-base
- (2) 2-1/4" steel columns and feet are cast aluminum- middle legs are double t-legs- 27-3/4" high without table top- maximum table size: 60" x 240"- metal stretchers included
double y-base
- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel - horizontal aluminum stretchers required
27-3/4"
Desk HeightFor 42" and 48" Deep Table Tops
12"
12"33-3/8"
16"
For 36" Deep Table Tops
9-1/2"
9-1/2"28-5/8"
12-1/2"
y-base
double y-base
6"
8"
41-1/2"
16-3/4"
Desk HeightFor 54" and 60" Deep Table Tops
For 48" Deep Table Tops
6"
8"
6"
8"
37-5/8"
14-3/4"
6"
8" 27-3/4"
115114 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
ML-YLG1-29-72-??? 36 x 72 28 5/8 33 7/8 $1,356 $1,555
ML-YLG1-33-84-??? 42 x 84, 48 x 84 33 3/8 46 1/2 $1,508 $1,725
ML-YLG1-33-96-??? 42 x 96, 48 x 96 33 3/8 58 1/2 $1,541 $1,765 - Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
ML-YLG2-33-84-??? 42 x 84, 48 x 84 32 7/8 46 1/2 $2,132 $2,548
ML-YLG2-33-96-??? 42 x 96, 48 x 96 32 7/8 58 1/2 $2,199 $2,627
ML-YLG2-33-240-??? 48 x 240 32 7/8 50 1/2 & 46 1/2 $5,913 $7,237
ML-YLG2-41-240-??? 54 x 240, 60 x 240 41 1/2 50 1/2 & 46 1/2 $6,059 $7,383
ML-YLG2-33-168-??? 48 x 168 32 7/8 40 1/2 $4,566 $5,494
ML-YLG2-41-168-??? 54 x 168, 60 x 168 41 1/2 40 1/2 $4,686 $5,614
ML-YLG2-33-192-??? 48 x 192 32 7/8 50 1/2 $4,653 $5,674
ML-YLG2-41-192-??? 54 x 192, 60 x 192 41 1/2 50 1/2 $4,774 $5,795
ML-YLG2-33-216-??? 48 x 216 32 7/8 58 1/2 $4,853 $5,911
ML-YLG2-41-216-??? 54 x 216, 60 x 216 41 1/2 58 1/2 $4,973 $6,032
ML-YLG2-33-120-??? 48 x 120 32 7/8 40 1/2 $3,334 $3,990
ML-YLG2-33-144-??? 48 x 144 32 7/8 52 1/2 $3,526 $4,269
ML-YLG2-41-144-??? 54 x 144, 60 x 144 41 1/2 52 1/2 $3,621 $4,365
3 Bases & 4 Spanning Rods
4 Bases & 6 Spanning Rods
5 Bases & 8 Spanning Rods
pricing - double y bases
Model Number Standard
Table Top Size Base Size Stretcher
Length Premium
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
2 Bases & 4 Stretchers
venice y-bases
1st2nd
3rd4th
5th
base placement rectangular, racetrack, boatshape and bow-end table tops
pricing - y bases
Model Number Standard
Table Top Size Base Size Stretcher
Length Premium
optional wiremanagement
Optional wire management grommets can be specified in the vertical columns on all Venice bases. When option is specified, an oval cutout, 1-1/4" x 2-1/4", is included in the column below the top plate and above the feet connection. Plastic grommet covers are included to cover the cutouts. OP-GROM-PRPL for $40 per leg.
36 72 18-3/16 53-3/16
42/48 84 17-7/8 66-1/8
42/48 96 17-7/8 78-1/8
48 120 17-3/4 60 102-1/4
48/54/60 144 17-3/4 72 126-1/4
48/54/60 168 19-1/8 61-7/16 103-11/16 146-1/16
48/54/60 192 17-9/16 69-7/8 122-1/8 174-7/16
48/54/60 216 17-9/16 77-7/8 138-1/8 198-7/16
48/54/60 240 19-7/16 71-3/4 120 168-1/4 220-9/16
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
Center of 5th Base
117116 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
t-leg
venice t-legs
dimensions
ML-PRPL-TT34-??? 48" 27 3/4 34 1 $616 $725
ML-PRPL-TT40-??? 54", 60" 27 3/4 40 1 $640 $749
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
1st2nd
3rd4th
5th
base placement rectangular, racetrack, boatshape and bow-end table tops
ML-PRPL-T33-??? 36" 27 3/4 32 3/4 1 $382 $435
ML-PRPL-T38-??? 42" 27 3/4 38 1/4 1 $443 $496
pricing
Model Number Standard
Table Top Width Base Size Bases
Included PremiumBase Height
Single T-Leg
Double T-Leg
double t-leg
details
6"
8"
40"
Desk HeightFor 54" and 60" Deep Table Tops
For 48" Deep Table Tops
6"
8"27-3/4"
6"
8"
34" 6"
8"
27-3/4"
8"
32-3/4" 8"
Desk HeightFor 42" Deep Table TopsFor 36" Deep Table Tops
6"
26" 8"
t-leg
double t-leg
- 2-1/4" steel column and feet are cast aluminum- maximum table size: 42" x 96"
t-leg
- (2) 2-1/4" steel columns and feet are cast aluminum- maximum table size: 60" x 240"
double t-leg
- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
36 72 18 54
42/48 84 19-1/8 64-7/8
42/48 96 19-1/8 76-7/8
48 120 19-1/8 60 100-7/8
48/54/60 144 19-1/8 72 124-7/8
48/54/60 168 19-1/8 62-3/8 105-5/8 148-7/8
48/54/60 192 19-1/8 70-3/8 121-5/8 172-7/8
48/54/60 216 19-1/8 63-9/16 108 152-7/16 196-7/8
48/54/60 240 19-1/8 69-9/16 120 170-7/16 220-7/8
TableDepth
TableLength
Center of 1st Base
Center of 2nd Base
Center of 3rd Base
Center of 4th Base
Center of 5th Base
119118 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
torrey leg
details
orientation for mounting torrey legs
- built-in wire management through the leg- heavy gauge steel construction- powdercoat finish- made in america- available in occasional, desk and standing heights
barn red blood orange sunset
heather gray midnight fresh snow
standard
finishes
asphalt
lemon yellow moss hunter denim deep ocean
premium - 10% upcharge (OP-COLOR)
wire management
table tops for torrey legs
rectangular racetrack boatshape bow-endround square
one piece table tops only, maximum width 48"
121120 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
dimensions
ML-TRAP-42-?? 48"X120" 40 3/4 4 3/4 1 $243 $267
ML-TRAP-29-?? 48"X120" 27 3/4 4 1/4 1 $221 $243
- Includes leveling glides.- To order, replace "??" with MN for Midnight, HG for Heather Grey, FS for Fresh Snow, AS for Asphalt, BR for Barn Red, BO for Blodd Orange, SN for Sunset, LY for Lemon Yellow, DM for Denim, DO for Deep Ocean, HU for Hunter and MO for Moss.
pricing
Model Number Standard
MAX Table Top Size Base Size Legs
Included PremiumBase Height
Desk Height
Standing Height
Maximum 48" Square Table Top
Maximum 48" x 120" one piece Table Top*additional stiffeners required
Minimum 30" Square Table Top
Maximum 60" Round Table Top
Minimum 36" Round Table Top
11"
9-13/16"11-13/16"
27-3/4"
2-1/2" 4-1/4"
11"
9-13/16"15-9/16"
40-3/4"
3-1/8" 4-3/4"
torrey leg details
minimum and maximum table sizes
Maximum 48" Square Table Top
Maximum 48" x 120" one piece Table Top*additional stiffeners required
Minimum 36" Square Table Top
Maximum 60" Round Table Top
Minimum 42" Round Table Top
desk height
standing height
Side View
stiffener bars
requires (2) 30" long stiffener barsAC-RDER-30 for $62 each
36" x 72"
requires (4) 42" long stiffener barsAC-RDER-42 for $72 each
42" x 84"
requires (4) 45" long stiffener barsAC-RDER-45 for $77 each
42" x 96"
requires (4) 48" long stiffener barsAC-RDER-48 for $81 each
48" x 96"
requires (4) 72" long stiffener barsAC-RDER-72 for $121 each
48" x 120" (one piece tops only)
Rectangular table tops with Torrey legs require external stiffeners. Stiffeners may interfer with mounting of some electrical grommets. Ship separately and are field installed. Placement allows for 7" of clear space between stiffener bars in center of the table for electrical gommet placement.
desk height standing height
Cover Panel View
Top View Top View
Side View Cover Panel View
123deskmakers.com
meeting cafe training occasionaltable of contents tables
Cafe cafetable of contents Cafe Table Tops 124-127Beacon 128-129Mission 130-131Newport 132-133Cabrillo 134-135Venice 136-137Topanga 138-139
125deskmakers.com124 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TP-SQRE-1919-??-?? 19 19 $328 $760 $998 $772 $1,074
TP-SQRE-2424-??-?? 24 24 $399 $848 $1,148 $940 $1,267
TP-SQRE-3030-??-?? 30 30 $575 $1,004 $1,474 $1,340 $2,114
TP-SQRE-3636-??-?? 36 36 $694 $1,194 $1,871 $1,611 $2,325
TP-SQRE-4242-??-?? 42 42 $913 $1,420 $2,341 $2,030 $2,930
TP-SQRE-4848-??-?? 48 48 NA $1,679 $2,883 $2,557 $3,692
TP-SQRE-5454-??-?? 54 54 NA $2,448 $3,973 $3,223 $4,652
TP-FULR-3030-??-?? 30 30 $509 NA NA NA NA
TP-FULR-3636-??-?? 36 36 $694 NA NA NA NA
TP-FULR-4242-??-?? 42 42 $913 NA NA NA NA
TP-FULR-4848-??-?? 48 48 NA NA NA NA NA
TP-FULR-5454-??-?? 54 54 NA NA NA NA NA
TP-FULR-6060-??-?? 60 60 NA NA NA NA NA
Model Number Depth Length
round table top 3DL and solid wood options - subject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L13D-J1
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
TP-FULR-3030-??-?? 30 30 $395 $435 $592 $685 $750
TP-FULR-3636-??-?? 36 36 $401 $441 $602 $855 $914
TP-FULR-4242-??-?? 42 42 $503 $553 $754 $885 $932
TP-FULR-4848-??-?? 48 48 $610 $671 $915 $1,018 $1,054
TP-FULR-5454-??-?? 54 54 $727 $800 $1,090 $1,265 $1,346
TP-FULR-6060-??-?? 60 60 $764 $841 $1,147 $1,295 $1,363
Model Number Depth Length
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A1
2mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
round table top TFL and HPL options
1-1/8" ThickThermofoil
Ergo
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
3DL Butcher Block Planked Wood
Model Number Depth Length
square table top 3DL and solid wood options - subject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L13D-J1
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
TP-SQRE-1919-??-?? 19 19 $139 $154 $209 $336 $418
TP-SQRE-2424-??-?? 24 24 $268 $295 $402 $445 $575
TP-SQRE-3030-??-?? 30 30 $347 $382 $521 $567 $645
TP-SQRE-3636-??-?? 36 36 $361 $397 $542 $696 $855
TP-SQRE-4242-??-?? 42 42 $463 $510 $695 $712 $968
TP-SQRE-4848-??-?? 48 48 $571 $628 $857 $936 $1,071
TP-SQRE-5454-??-?? 54 54 $679 $747 $1,019 $1,226 $1,265
Model Number Depth Length
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A1
2mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
square table top TFL and HPL options
1-1/8" ThickThermofoil
Ergo
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
3DL Butcher Block Planked Wood
127deskmakers.com126 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TP-RECT-3036-??-?? 30 36 $228 $251 $342 $447 $567
TP-RECT-3042-??-?? 30 42 $235 $259 $353 $454 $730
TP-RECT-3048-??-?? 30 48 $242 $266 $364 $463 $745
TP-RECT-3054-??-?? 30 54 $335 $368 $502 $712 $760
TP-RECT-3060-??-?? 30 60 $337 $370 $505 $720 $775
TP-RECT-3066-??-?? 30 66 $339 $373 $509 $728 $1,236
TP-RECT-3072-??-?? 30 72 $342 $376 $514 $736 $1,250
TP-RECT-3078-??-?? 30 78 $406 $446 $608 $745 $1,265
TP-RECT-3084-??-?? 30 84 $430 $472 $645 $753 $1,280
TP-RECT-2436-??-?? 24 36 $222 $243 $333 $439 $540
TP-RECT-2442-??-?? 24 42 $224 $246 $336 $447 $554
TP-RECT-2448-??-?? 24 48 $226 $249 $339 $454 $570
TP-RECT-2454-??-?? 24 54 $333 $366 $499 $704 $869
TP-RECT-2460-??-?? 24 60 $335 $368 $502 $712 $885
TP-RECT-2466-??-?? 24 66 $337 $370 $505 $720 $900
TP-RECT-2472-??-?? 24 72 $338 $372 $508 $728 $914
TP-RECT-2478-??-?? 24 78 $342 $376 $514 $736 $930
TP-RECT-2484-??-?? 24 84 $360 $396 $540 $745 $944
TP-RECT-1936-??-?? 19 36 $184 $203 $277 $352 $527
TP-RECT-1942-??-?? 19 42 $186 $205 $280 $360 $542
TP-RECT-1948-??-?? 19 48 $189 $208 $283 $446 $557
TP-RECT-1954-??-?? 19 54 $261 $287 $391 $704 $869
TP-RECT-1960-??-?? 19 60 $263 $289 $395 $712 $885
TP-RECT-1966-??-?? 19 66 $265 $292 $398 $720 $900
TP-RECT-1972-??-?? 19 72 $267 $294 $401 $728 $914
TP-RECT-1978-??-?? 19 78 $270 $297 $405 $736 $930
TP-RECT-1984-??-?? 19 84 $272 $300 $409 $745 $944
TP-RECT-1936-??-?? 19 36 $407 $900 $1,257 $1,149 $1,337
TP-RECT-1942-??-?? 19 42 $461 $955 $1,372 $1,210 $1,399
TP-RECT-1948-??-?? 19 48 $514 $1,009 $1,486 $1,370 $1,604
TP-RECT-1954-??-?? 19 54 $694 $1,064 $1,601 $1,536 $1,819
TP-RECT-1960-??-?? 19 60 $761 $1,119 $1,715 $1,596 $1,879
TP-RECT-1966-??-?? 19 66 $829 $1,174 $1,829 $1,760 $2,089
TP-RECT-1972-??-?? 19 72 $896 $1,228 $1,944 $1,923 $2,300
TP-RECT-1978-??-?? 19 78 $963 $1,283 $2,058 $1,984 $2,362
TP-RECT-1984-??-?? 19 84 $1,031 $1,338 $2,173 $2,045 $2,422
19" Deep
TP-RECT-2436-??-?? 24 36 $491 $986 $1,437 $1,352 $1,591
TP-RECT-2442-??-?? 24 42 $558 $1,056 $1,582 $1,429 $1,668
TP-RECT-2448-??-?? 24 48 $626 $1,124 $1,726 $1,635 $1,933
TP-RECT-2454-??-?? 24 54 $694 $1,194 $1,871 $1,842 $2,200
TP-RECT-2460-??-?? 24 60 $761 $1,264 $2,016 $1,918 $2,276
TP-RECT-2466-??-?? 24 66 $829 $1,332 $2,160 $2,125 $2,542
TP-RECT-2472-??-?? 24 72 $896 $1,402 $2,305 $2,331 $2,808
TP-RECT-2478-??-?? 24 78 $963 $1,471 $2,449 $2,408 $2,884
TP-RECT-2484-??-?? 24 84 $1,031 $1,540 $2,594 $2,484 $2,961
24" Deep
TP-RECT-3036-??-?? 30 36 $593 $1,090 $1,655 $1,596 $1,895
TP-RECT-3042-??-?? 30 42 $677 $1,176 $1,836 $1,693 $1,992
TP-RECT-3048-??-?? 30 48 $761 $1,264 $2,016 $1,951 $2,323
TP-RECT-3054-??-?? 30 54 $846 $1,350 $2,196 $2,208 $2,656
TP-RECT-3060-??-?? 30 60 $930 $1,436 $2,377 $2,304 $2,752
TP-RECT-3066-??-?? 30 66 $1,014 $1,523 $2,558 $2,562 $3,084
TP-RECT-3072-??-?? 30 72 $1,098 $1,610 $2,738 $2,819 $3,415
TP-RECT-3078-??-?? 30 78 $1,184 $1,696 $2,919 $2,915 $3,512
TP-RECT-3084-??-?? 30 84 $1,268 $1,783 $3,100 $3,011 $3,608
30" Deep
- 3DL, veneer, butcher block and planked wood worksurfaces may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block worksurfaces only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood worksurfaces only available in Maple, White Oak and Walnut with clear coat finish.- Please see the Materials Specification Guide for specifications and finishes.
19" Deep
24" Deep
30" Deep
- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
Model Number Depth Length
rectangular table top 3DL and solid wood options - subject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L13D-J1 Model Number Depth Length
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A1
2mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
rectangular table top TFL and HPL options
1-1/8" ThickThermofoil
Ergo
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
3DL Butcher Block Planked Wood
129128 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
beacon base
- 27" diameter base- 3" diameter column- glides have 1/8" adjustability and raise the base 1/4" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights
detailsdetails
table tops for use with beacon bases
Maximum 48" Round Table Top
Maximum 48" x 96" one piece Table Top
silver black white
finishes
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-RDDK-01-20-??? 30" or 36" round or 30" square 27 3/4 20 1 $647
CF-RDDK-01-24-??? 42" round or 36" square 27 3/4 24 1 $686
CF-RDDK-01-32-??? 48" round or 42" square 27 3/4 32 1 $816
Desk Height
CF-RDDK-05-20-??? 30" or 36" round or 30" square 40 3/4 20 1 $735
CF-RDDK-05-24-??? 42" round or 36" square 40 3/4 24 1 $774
CF-RDDK-05-32-??? 48" round or 42" square 40 3/4 32 1 $904
Standing Height
dimensions
27-3/4"
Desk Height
40-3/4"
Standing Height
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
12"
12"32"
32"
12"
12"24"
24"
10"
10"20"
20"
For 48" Round or 42" Square Table Tops
For 42" Round or 36" Square Table Tops
For 30" and 36" Round or 30" Square Table Tops
131130 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
mission base
- 27" x 27" square base- 3" x 3" square column- fully welded construction of top plate to column- disc is bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights
details
table tops for use with mission bases
Maximum 48" Round Table Top
Maximum 48" x 96" one piece Table Top
Maximum 42" Square Table Top
silver black white
finishes
For 48" Round or 42" Square Table Tops
12"
12"26"
dimensions
27-3/4"
Desk Height
40-3/4"
Standing Height
26"
12"
12"20"
20"
10"
10"16"
16"
For 42" Round or 36" Square Table Tops
For 30" and 36" Round or 30" Square Table Tops
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-SQDK-01-16-??? 30" or 36" round or 30" square 27 3/4 16 1 $647
CF-SQDK-01-20-??? 42" round or 36" square 27 3/4 20 1 $686
CF-SQDK-01-26-??? 48" round or 42" square 27 3/4 26 1 $816
Desk Height
CF-SQDK-05-16-??? 30" or 36" round or 30" square 40 3/4 16 1 $735
CF-SQDK-05-20-??? 42" round or 36" square 40 3/4 20 1 $774
CF-SQDK-05-26-??? 48" round or 42" square 40 3/4 26 1 $904
Standing Height
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
133132 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BMMX-05-24-??? 24 & 30" round & square 40 3/4 26 1 $468 $534
CF-BMMX-05-30-??? 36" & 42" round & square 40 3/4 32 1 $521 $587
CF-BMMX-05-60-??? 48" round & square; 54" & 60" round 40 3/4 38 1 $568 $634
newport x-base
details- 3" diameter column and feet are 1-7/8" diameter- fully welded construction of top plate to column- x-base is bolted to column, field assembly required- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights
orientation for mounting x-bases on square table tops
27-3/4"
For 48" Round/Square and 54" & 60" Round Table Tops
12"
12"38"
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
CF-BMMX-01-24-??? 24 & 30" round & square 27 3/4 26 1 $381 $447
CF-BMMX-01-30-??? 36" & 42" round & square 27 3/4 32 1 $434 $500
CF-BMMX-01-60-??? 48" round & square; 54" & 60" round 27 3/4 38 1 $481 $547
silver black white
finishes
dimensions
For 36" and 42" Table Tops
pricing Model Number Black
Table Top Size Base Size Bases
Included Silver/WhiteBase Height
Desk Height
38"
For 24" and 30" Table Tops
12"
12"32"
32"
12"
12"26"
26"
40-3/4"
Desk Height Standing Height
Standing Height
table tops for newport x-bases
squareround
135134 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
cabrillo base
details
orientation for mounting x-bases on square table tops
- 3" diameter column and feet are 1-1/2" diameter- fully welded construction of top plate to column- glides have 3/8" long stem- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in desk and standing heights
12"
12"38"
For 48" and 54" Round and 42" Square Table Tops
CF-ARTB-05-??? 36" or 42" round; 36" square 40 3/4 32 1 $556 $623
CF-ARTB-06-??? 48" or 54" round; 42" square 40 3/4 38 1 $642 $708
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
CF-ARTB-01-??? 36" or 42" round; 36" square 27 3/4 32 1 $496 $562
CF-ARTB-02-??? 48" or 54" round; 42" square 27 3/4 38 1 $543 $610
pricing
Model Number Black
Table Top Size Base Size Bases
Included Silver/WhiteBase Height
Desk Height
Standing Height
dimensions
27-3/4"
pricing
40-3/4"
Desk Height Standing Height
38"
12"
12"32"
For 36" and 42" Round and 36" Square Table Tops
32"
silver black white
finishes
table tops for cabrillo bases
squareround
137136 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
ML-PRPL-05-26-??? 30" & 36" round; or 30" square 40 3/4 26 1 $667 $726
ML-PRPL-05-33-??? 42" round; or 36" square 40 3/4 32 3/4 1 $693 $752
ML-PRPL-05-38-??? 48" & 54" round; or 42" square 40 3/4 38 1/4 1 $783 $846
ML-PRPL-01-26-??? 30" & 36" round; or 30" square 27 3/4 26 1 $596 $655
ML-PRPL-01-33-??? 42" round; or 36" square 27 3/4 32 3/4 1 $622 $681
ML-PRPL-01-38-??? 48" & 54" round; or 42" square 27 3/4 38 1/4 1 $713 $776
venice x-base
details- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - available in occasional, desk and standing heights- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
12"
12"38-1/4"
For 48" and 54" Round and 42" Square Table Tops
27-3/4"
Desk Height
38-1/4"
For 42" Round and 36" Square Table Tops
12"
12"32-3/4"
32-3/4"
12"
12"26"
26"
For 30" and 36" Round and 30" Square Table Tops
dimensions
pricing Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
40-3/4"
Standing Height
orientation for mounting x-bases on square table tops
table tops for venice x-bases
squareround
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
Desk Height
Standing Height
139138 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
topanga base
For 30", 36" and 42" Table Tops
12"
12"23-3/4"
dimensions
27-3/4"
Desk Height Standing Height
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
ML-TDSC-29-??? 30", 36" or 42" round 27 3/4 23 3/4 1 $1,163 $1,419
Desk Height
ML-TDSC-42-??? 30", 36" or 42" round 40 3/4 23 3/4 1 $1,555 $1,918
23-3/4"
40-3/4"
- 23-3/4" diameter base- desk height column is 4" at the top and 2" at the bottom- standing height column is 5" at the top and 2-1/4" at the bottom- glides raise the base 1" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel - available in desk and standing heights
detailsdetails
table tops for use with beacon bases
Maximum 42" Round Table Top
Maximum 42" x 96" one piece Table Top
Standing Height
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
141deskmakers.com
meeting cafe training occasionaltable of contents tables
Cafe trainingtable of contents Training Table Tops 142-151Newport 152-155Venice 156-159Cabrillo 160-161Strands 162-163Modesty Panels 164-165Ganging Brackets 166
143142 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
training table tops
training tables
finishes
1-1/8" thick thermally fused laminate (TFL) with multiple edge options1-1/8" thick high pressure laminate (HPL) with multiple edge options1-1/8" thick plain sawn veneer, quarter sawn and planked random match veneer with multiple edge options1" thick HPL with exposed plywood core1-1/8" thick HPL with MDF core and PVC knife edge1-1/8" thick thermofoil three dimensional laminate (3DL) (select sizes) 1-1/2" thick butcher block (select sizes and shapes)1-1/8" thick planked wood (select sizes and shapes)
rectangular trapezoid half-round
grain direction: grain direction runs length of the table dimensions: depths: 19", 24" and 30"lengths: 36" to 84" in 6" increments
rectangular tops
grain direction: grain direction runs length of the table dimensions: depths: 19", 24" and 30"lengths: 38", 48" and 60"
half round tops
grain direction: grain direction runs length of the table dimensions: depths: 19", 24" and 30"lengths: 38", 48", 60" and 72"
trapezoid tops
user edges for groups j and kshading indicates user edges
edges for training tables
A11-1/8" thick top2mm PVC edge
group a
1-1/8" thick top3DL ergo edge
group j
1-1/8" thick MDF top2mm PVC Knife edge
group k
1-1/8" & 1-1/2" thick solid wood topsolid wood square edge
group l
J1
K1
L1
1" thick topexposed plywood edge
group p
P1
user edge only profiled
for when tables are to be ganged together
j1 edge k1 edge
all edges profiled
for when tables are freestanding
j4 edge k4 edge
1-1/8" thick top2mm wood edge
group m
M1
145144 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
AC-ELV1-01- (2) power outlets- (1) convenience outlet on bottom- (2) RJ-45 keystone knockouts (jacks not included)- 108" long 15amp plug cord- standard Finish: Black
AC-ELV1-01-USB
- (2) power outlets- (2) 2.1A USB charging ports- (1) convenience outlet on bottom- (2) RJ-45 keystone knock outs (jacks not included)- 108" long 15amp plug cord- standard Finish: Black
AC-ELCV-??- multiple cofigurations available- spill resistant power outlets- (2) 2.1A USB charging ports- 108" long 15amp plug cord- clamp mount- finishes: Black, Silver, and White
Please see the electrical pricebook for additional information and pricing
power grommets
(image shown for reference only)
(image shown for reference only)
surface grommet sold separately
surface grommet sold separately
AC-PWRG-03- round 3" grommet hole- spill resistant power outlets- (2) 2.1A USB charging ports- 84" long 15amp plug cord- mounting ring- finishes: Black, Silver, and White
grommet locations
147deskmakers.com146 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
Model Number Depth Length
TT-RECT-1936-??-?? 19 36 $407 $554 $587 $900 $1,257 $1,149 $1,337
TT-RECT-1942-??-?? 19 42 $461 $579 $610 $955 $1,372 $1,210 $1,399
TT-RECT-1948-??-?? 19 48 $514 $603 $634 $1,009 $1,486 $1,370 $1,604
TT-RECT-1954-??-?? 19 54 $694 $890 $955 $1,064 $1,601 $1,536 $1,819
TT-RECT-1960-??-?? 19 60 $761 $915 $979 $1,119 $1,715 $1,596 $1,879
TT-RECT-1966-??-?? 19 66 $829 $940 $1,003 $1,174 $1,829 $1,760 $2,089
TT-RECT-1972-??-?? 19 72 $896 $963 $1,028 $1,228 $1,944 $1,923 $2,300
TT-RECT-1978-??-?? 19 78 $963 $988 $1,051 $1,283 $2,058 $1,984 $2,362
TT-RECT-1984-??-?? 19 84 $1,031 $1,013 $1,075 $1,338 $2,173 $2,045 $2,422
19" Deep
TT-RECT-2436-??-?? 24 36 $491 $591 $622 $986 $1,437 $1,352 $1,591
TT-RECT-2442-??-?? 24 42 $558 $621 $652 $1,056 $1,582 $1,429 $1,668
TT-RECT-2448-??-?? 24 48 $626 $650 $682 $1,124 $1,726 $1,635 $1,933
TT-RECT-2454-??-?? 24 54 $694 $944 $1,008 $1,194 $1,871 $1,842 $2,200
TT-RECT-2460-??-?? 24 60 $761 $973 $1,038 $1,264 $2,016 $1,918 $2,276
TT-RECT-2466-??-?? 24 66 $829 $1,004 $1,067 $1,332 $2,160 $2,125 $2,542
TT-RECT-2472-??-?? 24 72 $896 $1,034 $1,097 $1,402 $2,305 $2,331 $2,808
TT-RECT-2478-??-?? 24 78 $963 $1,064 $1,127 $1,471 $2,449 $2,408 $2,884
TT-RECT-2484-??-?? 24 84 $1,031 $1,093 $1,156 $1,540 $2,594 $2,484 $2,961
24" Deep
TT-RECT-3036-??-?? 30 36 $593 $733 $799 $1,090 $1,655 $1,596 $1,895
TT-RECT-3042-??-?? 30 42 $677 $770 $835 $1,176 $1,836 $1,693 $1,992
TT-RECT-3048-??-?? 30 48 $761 $806 $872 $1,264 $2,016 $1,951 $2,323
TT-RECT-3054-??-?? 30 54 $846 $1,205 $1,337 $1,350 $2,196 $2,208 $2,656
TT-RECT-3060-??-?? 30 60 $930 $1,242 $1,374 $1,436 $2,377 $2,304 $2,752
TT-RECT-3066-??-?? 30 66 $1,014 $1,278 $1,410 $1,523 $2,558 $2,562 $3,084
TT-RECT-3072-??-?? 30 72 $1,098 $1,316 $1,447 $1,610 $2,738 $2,819 $3,415
TT-RECT-3078-??-?? 30 78 $1,184 $1,352 $1,484 $1,696 $2,919 $2,915 $3,512
TT-RECT-3084-??-?? 30 84 $1,268 $1,388 $1,520 $1,783 $3,100 $3,011 $3,608
30" Deep
1-1/2" ThickMaple & Oak
2mm Wood Square Square
1-1/8" ThickQuarter Sawn
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
V2-M1 BL-L1 BB-L1 PL-L1 PW-L1
Veneer Planked WoodButcher Block
Square Square2mm Wood
1-1/8" ThickPlain Sawn
V1-M1
- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- Units 54" and longer are for use with flip-top bases only.- DO NOT ORDER UNITS 54" AND LONGER FOR USE WITH POST LEGS OR T-LEGS.- Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.
1-1/8" ThickThermofoil
Ergo
3DL
3D-J1
TT-RECT-3036-??-?? 30 36 $228 $251 $342 $447 $567
TT-RECT-3042-??-?? 30 42 $235 $259 $353 $454 $730
TT-RECT-3048-??-?? 30 48 $242 $266 $364 $463 $745
TT-RECT-3054-??-?? 30 54 $335 $368 $502 $712 $760
TT-RECT-3060-??-?? 30 60 $337 $370 $505 $720 $775
TT-RECT-3066-??-?? 30 66 $339 $373 $509 $728 $1,236
TT-RECT-3072-??-?? 30 72 $342 $376 $514 $736 $1,250
TT-RECT-3078-??-?? 30 78 $406 $446 $608 $745 $1,265
TT-RECT-3084-??-?? 30 84 $430 $472 $645 $753 $1,280
TT-RECT-2436-??-?? 24 36 $222 $243 $333 $439 $540
TT-RECT-2442-??-?? 24 42 $224 $246 $336 $447 $554
TT-RECT-2448-??-?? 24 48 $226 $249 $339 $454 $570
TT-RECT-2454-??-?? 24 54 $333 $366 $499 $704 $869
TT-RECT-2460-??-?? 24 60 $335 $368 $502 $712 $885
TT-RECT-2466-??-?? 24 66 $337 $370 $505 $720 $900
TT-RECT-2472-??-?? 24 72 $338 $372 $508 $728 $914
TT-RECT-2478-??-?? 24 78 $342 $376 $514 $736 $930
TT-RECT-2484-??-?? 24 84 $360 $396 $540 $745 $944
TT-RECT-1936-??-?? 19 36 $184 $203 $277 $352 $527
TT-RECT-1942-??-?? 19 42 $186 $205 $280 $360 $542
TT-RECT-1948-??-?? 19 48 $189 $208 $283 $446 $557
TT-RECT-1954-??-?? 19 54 $261 $287 $391 $704 $869
TT-RECT-1960-??-?? 19 60 $263 $289 $395 $712 $885
TT-RECT-1966-??-?? 19 66 $265 $292 $398 $720 $900
TT-RECT-1972-??-?? 19 72 $267 $294 $401 $728 $914
TT-RECT-1978-??-?? 19 78 $270 $297 $405 $736 $930
TT-RECT-1984-??-?? 19 84 $272 $300 $409 $745 $944
Model Number Depth Length
19" Deep
24" Deep
30" Deep
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A12mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Units 54" and longer are for use with fliptop bases only.- DO NOT ORDER UNITS 54" AND LONGER FOR USE WITH POST LEGS OR T-LEGS.- Please see the Materials Specification Guide for specifications and finishes.
rectangular table top TFL and HPL options
rectangular table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.
149deskmakers.com148 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
Model Number Depth Length
TT-RECS-1954-??-?? 19 54 $735 $932 $996 NA NA NA NA
TT-RECS-1960-??-?? 19 60 $803 $957 $1,020 NA NA NA NA
TT-RECS-1966-??-?? 19 66 $876 $987 $1,049 NA NA NA NA
TT-RECS-1972-??-?? 19 72 $943 $1,010 $1,074 NA NA NA NA
TT-RECS-1978-??-?? 19 78 $1,021 $1,046 $1,110 NA NA NA NA
TT-RECS-1984-??-?? 19 84 $1,089 $1,071 $1,134 NA NA NA NA
24" Deep
TT-RECS-2454-??-?? 24 54 $735 $986 $1,049 NA NA NA NA
TT-RECS-2460-??-?? 24 60 $803 $1,015 $1,080 NA NA NA NA
TT-RECS-2466-??-?? 24 66 $876 $1,050 $1,114 NA NA NA NA
TT-RECS-2472-??-?? 24 72 $943 $1,081 $1,144 NA NA NA NA
TT-RECS-2478-??-?? 24 78 $1,021 $1,122 $1,186 NA NA NA NA
TT-RECS-2484-??-?? 24 84 $1,089 $1,151 $1,215 NA NA NA NA
30" Deep
TT-RECS-3054-??-?? 30 54 $887 $1,247 $1,379 NA NA NA NA
TT-RECS-3060-??-?? 30 60 $971 $1,283 $1,415 NA NA NA NA
TT-RECS-3066-??-?? 30 66 $1,061 $1,325 $1,457 NA NA NA NA
TT-RECS-3072-??-?? 30 72 $1,145 $1,362 $1,493 NA NA NA NA
TT-RECS-3078-??-?? 30 78 $1,242 $1,410 $1,542 NA NA NA NA
TT-RECS-3084-??-?? 30 84 $1,326 $1,447 $1,579 NA NA NA NA
36" Deep
1-1/2" ThickMaple & Oak
2mm Wood Square Square
1-1/8" ThickQuarter Sawn
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
V2-M1 BL-L1 BB-L1 PL-L1 PW-L1
Veneer Planked WoodButcher Block
Square Square2mm Wood
1-1/8" ThickPlain Sawn
V1-M1
1-1/8" ThickThermofoil
Ergo
3DL
3D-J1
TT-RECS-3054-??-?? 30 54 $376 $414 $565 $754 $802
TT-RECS-3060-??-?? 30 60 $379 $416 $568 $761 $816
TT-RECS-3066-??-?? 30 66 $386 $424 $579 $775 $1,282
TT-RECS-3072-??-?? 30 72 $389 $427 $583 $783 $1,297
TT-RECS-3078-??-?? 30 78 $464 $511 $696 $803 $1,323
TT-RECS-3084-??-?? 30 84 $488 $537 $732 $811 $1,338
TT-RECS-2454-??-?? 24 54 $374 $412 $562 $746 $911
TT-RECS-2460-??-?? 24 60 $376 $414 $565 $754 $927
TT-RECS-2466-??-?? 24 66 $384 $422 $576 $766 $946
TT-RECS-2472-??-?? 24 72 $385 $423 $577 $775 $961
TT-RECS-2478-??-?? 24 78 $400 $441 $601 $795 $988
TT-RECS-2484-??-?? 24 84 $418 $460 $627 $803 $1,003
TT-RECS-1954-??-?? 19 54 $303 $333 $453 $746 $911
TT-RECS-1960-??-?? 19 60 $305 $335 $458 $754 $927
TT-RECS-1966-??-?? 19 66 $312 $343 $468 $766 $946
TT-RECS-1972-??-?? 19 72 $314 $346 $472 $775 $961
TT-RECS-1978-??-?? 19 78 $329 $361 $492 $795 $988
TT-RECS-1984-??-?? 19 84 $331 $364 $496 $803 $1,003
Model Number Depth Length
19" Deep
24" Deep
30" Deep
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A12mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
rectangular table top TFL and HPL options
rectangular table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.
- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- For use with Post Legs and T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.
- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - For use with Post Legs and T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Please see the Materials Specification Guide for specifications and finishes.
151deskmakers.com150 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TT-TRPZ-1938-??-?? 19 19-38 $236 $259 $354 $400 $505
TT-TRPZ-2448-??-?? 24 24-48 $243 $267 $365 $467 $570
TT-TRPZ-2460-??-?? 24 36-60 $355 $390 $532 $569 $677
TT-TRPZ-3060-??-?? 30 30-60 $397 $437 $596 $724 $775
TT-TRPZ-4272-??-?? 30 42-72 $459 $504 $687 $733 $1,250
TT-TRPZ-1938-??-?? 19 19-38 $424 $571 $602 NA NA NA NA
TT-TRPZ-2448-??-?? 24 24-48 $626 $660 $693 NA NA NA NA
TT-TRPZ-2460-??-?? 24 36-60 $761 $986 $1,049 NA NA NA NA
TT-TRPZ-3060-??-?? 30 30-60 $930 $1,254 $1,386 NA NA NA NA
TT-TRPZ-4272-??-?? 30 42-72 $1,098 $1,329 $1,461 NA NA NA NA
Model Number Depth
1-1/2" ThickMaple & Oak
2mm Wood Square Square
1-1/8" ThickQuarter Sawn
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
V2-M1 BL-L1 BB-L1 PL-L1 PW-L1
Veneer Planked WoodButcher Block
Square Square2mm Wood
1-1/8" ThickPlain Sawn
V1-M1
1-1/8" ThickThermofoil
Ergo
3DL
3D-J1 Model Number Depth
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A12mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
TT-HRND-1938-??-?? 19 38 $256 $282 $385 $527 $649
TT-HRND-2448-??-?? 24 48 $322 $355 $484 $620 $775
TT-HRND-3060-??-?? 30 60 $468 $515 $702 $733 $898
TT-HRND-1938-??-?? 19 38 $424 $571 $602 NA NA NA NA
TT-HRND-2448-??-?? 24 48 $626 $660 $693 NA NA NA NA
TT-HRND-3060-??-?? 30 60 $930 $1,254 $1,386 NA NA NA NA
Model Number Depth
1-1/2" ThickMaple & Oak
2mm Wood Square Square
1-1/8" ThickQuarter Sawn
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
V2-M1 BL-L1 BB-L1 PL-L1 PW-L1
Veneer Planked WoodButcher Block
Square Square2mm Wood
1-1/8" ThickPlain Sawn
V1-M1
1-1/8" ThickThermofoil
Ergo
3DL
3D-J1 Model Number Depth
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A12mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1Length
Length
Length
Length
half round table top TFL and HPL options
half round table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.
trapezoid table top TFL and HPL options
trapezoid table top 3DL, Veneer and Solid Wood*Subject to minimum order requirements, see below.
- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Please see the Materials Specification Guide for specifications and finishes.
- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.
- TFL table tops are only available with DeskMakers standard 2MM PVC edgebanding.- HPL table tops with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Please see the Materials Specification Guide for specifications and finishes.
- 3DL, veneer, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood only available in Maple, White Oak and Walnut with clear coat finish.- Units 54" and longer come standard with an anti-sag stiffener bar.- For use with four Post Legs or two T-Legs only. - DO NOT ORDER FOR USE WITH FLIP TOP BASES WITH STEEL BEAM CROSSE BAR. - Solid wood table tops CANNOT be used on flip-top bases. - Please see the Materials Specification Guide for specifications and finishes.
153152 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
newport bases
silver black white
finishesdetailsdetails- 2-3/8" diameter column and feet- fully welded construction- glides have 3/8" long stem- casters are 2-3/8" high, 2" black nylon wheels- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in flip-top and fixed bases
For 30" Deep Table Tops
2-3/8"
5-1/2"26"
dimensions
27-3/4"
Desk Height
5-1/2"
For 24" Deep Table Tops
2-3/8"
5-1/2"22"
5-1/2"
For 19" Deep Table Tops
2-3/8"
5-1/2"16"
5-1/2"
table tops for newport flip-top bases
rectangular*specify table tops without stiffener bar
- worksurfaces lock in both flat and upright positions- paddle release handle is standard underneath the surface and can be operated with one hand- user side flips up- steel beam cross bar for lateral support- hinged modesty panels should be used with flip-top bases- standard with 2 locking and 2 non-locking casters- solid wood table tops cannot be used on flip-top bases
steel beam cross bar
nesting dimensionstables can be nested together for storage when placed in the upright position
For 48" and 54" Long Table Tops For 60" and 66" Long Table Tops For 72" Long Table Tops
58-1/8"46-1/8" 70-1/8"
7-1/2"
*based on 60" table top
2-1/2"
5"
65"
flip-top bases
155154 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TT-FT01-1948-?? 19" x 48" 27 3/4 16 2 $928
TT-FT01-1954-?? 19" x 54" 27 3/4 16 2 $952
TT-FT01-1960-?? 19" x 60" 27 3/4 16 2 $961
TT-FT01-1966-?? 19" x 66" 27 3/4 16 2 $977
TT-FT01-1972-?? 19" x 72" 27 3/4 16 2 $990
TT-FT01-2448-?? 24" x 48" 27 3/4 22 2 $928
TT-FT01-2454-?? 24" x 54" 27 3/4 22 2 $952
TT-FT01-2460-?? 24" x 60" 27 3/4 22 2 $961
TT-FT01-2466-?? 24" x 66" 27 3/4 22 2 $977
TT-FT01-2472-?? 24" x 72" 27 3/4 22 2 $990
TT-FT01-3048-?? 30" x 48" 27 3/4 26 2 $938
TT-FT01-3054-?? 30" x 54" 27 3/4 26 2 $961
TT-FT01-3060-?? 30" x 60" 27 3/4 26 2 $972
TT-FT01-3066-?? 30" x 66" 27 3/4 26 2 $986
TT-FT01-3072-?? 30" x 72" 27 3/4 26 2 $999 TT-TLG6-16-SET-??? 19" deep 27 3/4 16 2 $368 $463
TT-TLG6-22-SET-??? 24" deep 27 3/4 22 2 $396 $491
TT-TLG6-26-SET-??? 30" deep 27 3/4 26 2 $402 $497
TT-TLG7-16-SET-??? 19" deep 27 3/4 16 2 $454 $549
TT-TLG7-22-SET-??? 24" deep 27 3/4 22 2 $485 $579
TT-TLG7-26-SET-??? 30" deep 27 3/4 26 2 $491 $587
newport flip-top bases newport fixed t-leg details
pricing
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
- To order, replace "??" with SM for Silver Metallic, BL for Black or WT for White finish.- Includes casters, 2 locking and 2 non-locking..- All units include cross-bar that acts as anti-sag stabilizer. Order worksurfaces without stiffener bar.
table tops for newport fixed bases
rectangular trapezoid half-round
*table tops 54" and longer require stiffener bar
For 30" Deep Table Tops
2-3/8"
5-1/2"26"
dimensions
27-3/4"
Desk Height
5-1/2"
For 24" Deep Table Tops
2-3/8"
5-1/2"22"
5-1/2"
For 19" Deep Table Tops
2-3/8"
5-1/2"16"
5-1/2"
pricing Model Number
Table Top Size Base Size Bases
Included Silver/WhiteBase Height
Levelers
Black
Casters
- To order, replace "??" with SLV for Silver Metallic, BLK for Black or WHT for White finish. - Table tops 54" and longer require anti-sag stiffener bar.
19" Deep
24" Deep
30" Deep
157156 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
venice bases
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
details- 2-1/4" steel column and feet are cast aluminum- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
table tops for venice fixed bases
rectangular trapezoid half-round*table tops 54" and longer require stiffener bar
dimensions
nesting dimensionstables can be nested together for storage when placed in the upright position
- worksurfaces lock in both flat and upright positions- paddle release handle is standard underneath the surface and can be operated with one hand- user side flips up- hinged modesty panels should be used with flip-top bases- standard with 2 locking and 2 non-locking casters- solid wood table tops cannot be used on flip-top bases
6-1/4"
*based on 60" table top
1-3/4"
3-1/2"
63-1/2"
27-3/4"
Desk HeightFor 30" Deep Table Tops
2-1/4"
8-5/8"26"
5-1/2"
For 24" Deep Table Tops
For 19" Deep Table Tops
2-1/4"
8-5/8"20"
5-1/2"
2-1/4"
8-5/8"15-1/4"
5-1/2"
flip-top bases
159158 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
ML-PRPL-TL15-SET-?? 19" deep 27 3/4 15 1/4 2 $626 $749
ML-PRPL-TL20-SET-?? 24" deep 27 3/4 20 2 $643 $765
ML-PRPL-TL26-SET-?? 30" deep 27 3/4 26 2 $682 $807
ML-PRPL-TC15-SET-?? 19" deep 27 3/4 15 1/4 2 $682 $807
ML-PRPL-TC20-SET-?? 24" deep 27 3/4 20 2 $699 $824
ML-PRPL-TC26-SET-?? 30" deep 27 3/4 26 2 $740 $865
venice flip-top t-leg base venice fixed t-leg base
table tops for venice fixed bases
rectangular trapezoid half-round
*table tops 54" and longer require stiffener bar
dimensions
pricing Model Number
Table Top Size Base Size Bases
Included PremiumBase Height
Levelers
Standard
Casters
- To order, replace "??" with SLV for Silver Metallic, BLK for Black or WHT for White finish. - Table tops 54" and longer require anti-sag stiffener bar.
ML-FT04-15-SET-?? 19" deep 27 3/4 15 1/4 2 $1,100 $1,340
ML-FT04-20-SET-?? 24" deep 27 3/4 20 2 $1,117 $1,356
ML-FT04-26-SET-?? 30" deep 27 3/4 26 2 $1,159 $1,398
pricing Model Number
Table Top Size Base Size Bases
Included PremiumBase Height Standard
- To order, replace "??" with SLV for Silver Metallic, BLK for Black or WHT for White finish. - Table tops 54" and longer require anti-sag stiffener bar.
optional wiremanagement
27-3/4"
Desk HeightFor 30" Deep Table Tops
2-1/4"
8"26"
6"
For 24" Deep Table Tops
For 19" Deep Table Tops
2-1/4"
8"20"
6"
2-1/4"
8"15-1/4"
6"
Optional wire management grommets can be specified in the vertical columns on all Venice bases. When option is specified, an oval cutout, 1-1/4" x 2-1/4", is included in the column below the top plate and above the feet connection. Plastic grommet covers are included to cover the cutouts. OP-GROM-PRPL for $40 per leg.
161160 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
cabrillo base
details- 2" diameter column and feet are 1-3/8" diameter- fully welded construction of top plate to column- glides have 3/8" long stem- casters are 2-3/8" high, 2" black nylon wheels- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in fixed height with levelers or casters
silver black white
finishes
ML-TLG8-16-SET-?? 19" deep 27 3/4 16 2 $422 $493
ML-TLG8-22-SET-?? 24" deep 27 3/4 22 2 $447 $516
ML-TLG8-26-SET-?? 30" deep 27 3/4 26 2 $474 $545
ML-TLG9-15-SET-?? 19" deep 27 3/4 16 2 $487 $557
ML-TLG9-20-SET-?? 24" deep 27 3/4 22 2 $512 $582
ML-TLG9-26-SET-?? 30" deep 27 3/4 26 2 $539 $609
pricing Model Number
Table Top Size Base Size Bases
Included Silver/WhiteBase Height
Levelers
Black
Casters
- To order, replace "??" with SLV for Silver Metallic, BLK for Black or WHT for White finish. - Table tops 54" and longer require anti-sag stiffener bar.
For 30" Deep Table Tops
1-3/8"
5-1/2"26"
dimensions
27-3/4"
Desk Height with Levelers
5-1/2"
For 24" Deep Table Tops
For 19" Deep Table Tops
table tops for cabrillo fixed bases
rectangular trapezoid half-round
*table tops 54" and longer require stiffener bar
1-3/8"
5-1/2"22"
5-1/2"
1-3/8"
5-1/2"16"
5-1/2"
27-3/4"
Desk Height with Casters
163162 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TT-RPST-02-SET-BLK 27 3/4 2 4 $225
TT-RPST-02-SET-SLV 27 3/4 2 4 $241
TT-RPST-03-SET-BLK 27 3/4 2 4 $324
TT-RPST-03-SET-SLV 27 3/4 2 4 $387
TT-RPST-14-SET-SLV 27 3/4 2 1/2 4 $495
TT-RPST-14-SET-BLK 27 3/4 2 1/2 4 $545
TT-RPST-14-SET-WHT 27 3/4 2 1/2 4 $545
TT-RPST-14-SET-RAW 27 3/4 2 1/2 4 $545
strands legs
round post details- 2" diameter column - fully welded construction of top plate to column- glides have 3/8" long stem- casters are 2-3/8" high, 2" black nylon wheels- 14 gauge tube steel- powdercoat finish
silver black
round post finishes
table tops for strands legs
rectangular trapezoid half-round
*table tops 54" and longer require stiffener bar *maximum table top size is 36" x 72"
square post details- 2-1/2" x 2-1/2" column - fully welded construction of top plate to column- each leg has one leveling glide located at the bottom of each leg and provides 1-1/2" of adjustment. - 14 gauge tube steel- powdercoat finish
silver black white
square post finishes
raw steel square post pricing
Model Number Base Size Legs
Included PriceBase Height
round post pricing
Model Number Base Size Legs
Included PriceBase Height
Levelers
Casters
levelers casters
165deskmakers.com164 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TT-LMOD-1232-? 12 32 $116 $187
TT-LMOD-1234-? 12 34 $118 $188
TT-LMOD-1236-? 12 36 $120 $192
TT-LMOD-1238-? 12 38 $121 $193
TT-LMOD-1240-? 12 40 $124 $197
TT-LMOD-1242-? 12 42 $127 $202
TT-LMOD-1244-? 12 44 $129 $206
TT-LMOD-1246-? 12 46 $130 $208
TT-LMOD-1248-? 12 48 $132 $211
TT-LMOD-1250-? 12 50 $134 $214
TT-LMOD-1252-? 12 52 $135 $216
TT-LMOD-1254-? 12 54 $138 $220
TT-LMOD-1256-? 12 56 $142 $228
TT-LMOD-1258-? 12 58 $148 $237
TT-LMOD-1260-? 12 60 $152 $243
TT-LMOD-1262-? 12 62 $154 $245
TT-LMOD-1264-? 12 64 $160 $256
TT-LMOD-1266-? 12 66 $164 $263
TT-LMOD-1268-? 12 68 $167 $268
TT-LMOD-1270-? 12 70 $172 $275
TT-LMOD-1272-? 12 72 $178 $285
Model Number
- Grain runs horizontally for all sizes.- Ships unattached.- Cannot be used on fliptop tables.
Height Width
TT-LMDH-1232-? 12 32 $187 $300
TT-LMDH-1234-? 12 34 $188 $301
TT-LMDH-1236-? 12 36 $190 $305
TT-LMDH-1238-? 12 38 $193 $309
TT-LMDH-1240-? 12 40 $194 $312
TT-LMDH-1242-? 12 42 $208 $332
TT-LMDH-1244-? 12 44 $212 $340
TT-LMDH-1246-? 12 46 $213 $341
TT-LMDH-1248-? 12 48 $216 $346
TT-LMDH-1250-? 12 50 $229 $366
TT-LMDH-1252-? 12 52 $231 $368
TT-LMDH-1254-? 12 54 $233 $372
TT-LMDH-1256-? 12 56 $235 $375
TT-LMDH-1258-? 12 58 $246 $395
TT-LMDH-1260-? 12 60 $250 $400
TT-LMDH-1262-? 12 62 $252 $404
TT-LMDH-1264-? 12 64 $253 $405
TT-LMDH-1266-? 12 66 $267 $427
TT-LMDH-1268-? 12 68 $269 $431
TT-LMDH-1270-? 12 70 $272 $436
TT-LMDH-1272-? 12 72 $275 $440
- Grain runs horizontally for all sizes.- Ships unattached.- Ships with hinges. For use on fliptop tables.
HPL w/PVC (H)TFL (T) Model Number Height Width HPL w/PVC (H)TFL (T)
laminate fixed modesty panel12" high
laminate hinged modesty panel12" high
167deskmakers.com166 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
- Use to connect tables where the stregth of the connection is paramount and reconfigurations will occur infrequently. - Includes two brackets and screws. - Must be field installed.
Model Number Price
AC-BRKT-TT Two brackets with screws $17
TT-BRKT-GANG One bracket consisting of two symmetrical pieces $37
- Use to connect tables that will be frequently disconnected and reconfigured.- Set includes two symmetrical ganging bracket pieces and screws. - Must be field installed. - Not recommended for areas with unlevel floors.
One piece of connector is secured to the underside of each table to be ganged together.
By rotating the ganging pieces, the table is securely ganged together.
TT-AMOD-1232 12 32 $267
TT-AMOD-1234 12 34 $275
TT-AMOD-1236 12 36 $282
TT-AMOD-1238 12 38 $289
TT-AMOD-1240 12 40 $297
TT-AMOD-1242 12 42 $303
TT-AMOD-1244 12 44 $309
TT-AMOD-1246 12 46 $319
TT-AMOD-1248 12 48 $326
TT-AMOD-1250 12 50 $370
TT-AMOD-1252 12 52 $376
TT-AMOD-1254 12 54 $384
TT-AMOD-1256 12 56 $393
TT-AMOD-1258 12 58 $399
TT-AMOD-1260 12 60 $406
TT-AMOD-1262 12 62 $413
TT-AMOD-1264 12 64 $420
TT-AMOD-1266 12 66 $426
TT-AMOD-1268 12 68 $435
TT-AMOD-1270 12 70 $442
TT-AMOD-1272 12 72 $449
Model Number
- Ships unattached.- Cannot be used on fliptop tables.
Height Width 3/16"Frosted Acrylic (A)
unframed acrylic modesty panel12" high
training table connecting bracketfor leveling applications
Model Number Price
training table ganging connector bracket
169deskmakers.com
meeting cafe training occasionaltable of contents tables
Cafe occasionaltable of contents Occasional Table Tops 170-173Beacon 174-175Mission 176-177Venice 178-179Zuma 180-181Torrey 182Balboa 183Doheny 184-185Solana 186-187
171deskmakers.com170 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TP-FULR-1818-??-?? 18 18 $315 NA NA NA NA
TP-FULR-2020-??-?? 20 20 $378 NA NA NA NA
TP-FULR-2222-??-?? 22 22 $403 NA NA NA NA
TP-FULR-2424-??-?? 24 24 $420 NA NA NA NA
TP-FULR-2626-??-?? 26 26 $447 NA NA NA NA
TP-FULR-2828-??-?? 28 28 $475 NA NA NA NA
TP-FULR-3030-??-?? 30 30 $489 NA NA NA NA
TP-FULR-3232-??-?? 32 32 $540 NA NA NA NA
TP-FULR-3434-??-?? 34 34 $600 NA NA NA NA
TP-FULR-3636-??-?? 36 36 $667 NA NA NA NA
Model Number Depth Length
round table top 3DL and solid wood options - subject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L13D-J1
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
TP-FULR-1818-??-?? 18 18 $137 $150 $205 $237 $260
TP-FULR-2020-??-?? 20 20 $170 $187 $255 $295 $323
TP-FULR-2222-??-?? 22 22 $204 $224 $306 $354 $388
TP-FULR-2424-??-?? 24 24 $243 $267 $364 $422 $461
TP-FULR-2626-??-?? 26 26 $285 $314 $428 $496 $542
TP-FULR-2828-??-?? 28 28 $328 $361 $492 $569 $623
TP-FULR-3030-??-?? 30 30 $380 $418 $569 $659 $721
TP-FULR-3232-??-?? 32 32 $383 $422 $575 $738 $817
TP-FULR-3434-??-?? 34 34 $392 $431 $588 $800 $864
TP-FULR-3636-??-?? 36 36 $414 $455 $621 $828 $882
Model Number Depth Length
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A1
2mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
round table top TFL and HPL options
1-1/8" ThickThermofoil
Ergo
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
3DL Butcher Block Planked Wood
173deskmakers.com172 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
TP-RECC-1818-??-?? 12 18 $234 NA NA NA NA
TP-RECC-2020-??-?? 14 20 $318 NA NA NA NA
TP-RECC-1218-??-?? 12 18 $141 $155 $165 $239 $282
TP-RECC-1420-??-?? 14 20 $153 $168 $185 $270 $375
TP-SQRE-1818-??-?? 18 18 $315 $731 $960 $742 $1,033
TP-SQRE-2020-??-?? 20 20 $350 $756 $980 $840 $1,120
TP-SQRE-2222-??-?? 22 22 $370 $773 $1,008 $874 $1,176
TP-SQRE-2424-??-?? 24 24 $384 $815 $1,104 $904 $1,218
TP-SQRE-2626-??-?? 26 26 $416 $888 $1,222 $1,011 $1,481
TP-SQRE-2828-??-?? 28 28 $478 $945 $1,323 $1,134 $1,863
TP-SQRE-3030-??-?? 30 30 $553 $965 $1,417 $1,288 $2,033
TP-SQRE-3232-??-?? 32 32 $568 $994 $1,562 $1,406 $2,109
TP-SQRE-3434-??-?? 34 34 $608 $1,056 $1,704 $1,480 $2,184
TP-SQRE-3636-??-?? 36 36 $667 $1,148 $1,799 $1,549 $2,236
Model Number Depth Length
square table top 3DL and solid wood options - subject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L13D-J1
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
TP-SQRE-1818-??-?? 18 18 $134 $148 $201 $323 $402
TP-SQRE-2020-??-?? 20 20 $167 $184 $250 $402 $500
TP-SQRE-2222-??-?? 22 22 $200 $220 $301 $419 $529
TP-SQRE-2424-??-?? 24 24 $258 $284 $387 $428 $553
TP-SQRE-2626-??-?? 26 26 $271 $298 $407 $453 $578
TP-SQRE-2828-??-?? 28 28 $289 $317 $433 $471 $602
TP-SQRE-3030-??-?? 30 30 $334 $367 $501 $528 $620
TP-SQRE-3232-??-?? 32 32 $312 $343 $468 $547 $648
TP-SQRE-3434-??-?? 34 34 $333 $366 $499 $595 $731
TP-SQRE-3636-??-?? 36 36 $347 $382 $521 $669 $822
Model Number Depth Length
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A1
2mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
square table top TFL and HPL options
1-1/8" ThickThermofoil
Ergo
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
3DL Butcher Block Planked Wood
TP-RECT-1818-??-?? 12 18 $213 $731 $960 $742 $1,033
TP-RECT-2020-??-?? 14 20 $289 $815 $1,104 $904 $1,218
Model Number Depth Length
rectangular table tops for zuma laptop tables3DL and solid wood optionssubject to minimum order requirements, see below.
BL-L1 BB-L1 PL-L1 PW-L13D-J1
- 3DL, butcher block and planked wood table tops may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Butcher block tops only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood tops only available in Maple, Red Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications, finishes and requirements.
TP-RECT-1218-??-?? 12 18 $128 $141 $150 $217 $256
TP-RECT-1420-??-?? 14 20 $139 $153 $168 $245 $341
Model Number Depth Length
1-1/8" ThickStandard TFL
2mm PVC 2mm PVC 2mm PVC
TFL
T1-A1
2mm PVC Knife Exposed Plywood
1-1/8" ThickPremium TFL
HPL1-1/8" Thick
Standard HPL1-1/8" Thick
MDF Core1" Thick
Plywood Core
T2-A1 H1-A1 H1-K1 H1-P1
- TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding.- HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes.
rectangular table tops for zuma laptop tablesTFL and HPL options
1-1/8" ThickThermofoil
Ergo
1-1/2" ThickMaple & Oak
Square Square
1-1/2" ThickWalnut
1-1/8" ThickMaple & Oak
1-1/8" ThickWalnut
Square Square
3DL Butcher Block Planked Wood
Square CornerSquare Corner
Radius CornerRadius Corner
Square Corner Radius Corner Square Corner Radius Corner
175174 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-RDDK-03-20-??? 24”, 30” or 36” round or 24” or 30” square 15 20 1 $697
CF-RDDK-03-24-??? 42” round or 36” square 15 24 1 $735
CF-RDDK-03-32-??? 48” round or 42” square 15 32 1 $865
beacon base
- tables tops are sold separately- 3" diameter column- glides have 1/8" adjustability and raise the base 1/4" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights
details
dimensions
15"
Occasional Height
details
silver black white
finishes
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
beacon power base
- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- 4" diameter column- top plate allows for centered power grommet- glides have 1/8" adjustability and raise the base 1/4" above the floor- fully welded construction of top plate to column- disc is bolted to column, field assembly required- 14 gauge tube steel with 25% recycled content- powdercoat finish- available in occasional, desk and standing heights
detailsdetails
silver black white
finishes
15"
Occasional Height
compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND
12"
12"32"
32"
12"
12"24"
24"
10"
10"20"
20"
For 48" Round or 42" Square Table Tops
For 42" Round or 36" Square Table Tops
For 24", 30" and 36" Round or 24" or 30" Square Table Tops
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-RDDK-EL03-20-??? 24”, 30” or 36” round or 24” or 30” square 15 20 1 $893
CF-RDDK-EL03-24-??? 42” round or 36” square 15 24 1 $931
CF-RDDK-EL03-32-??? 48” round or 42” square 15 32 1 $1,061
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
dimensions 12"
12"32"
32"
12"
12"24"
24"
12"
12"20"
20"
- AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03
For 48" Round or 42" Square Table Tops
For 42" Round or 36" Square Table Tops
For 24", 30" and 36" Round or 24" or 30" Square Table Tops
177176 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
mission base
- tables tops are sold separately- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights
details
silver black white
finishes
15"
Occasional Height
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-SQDK-03-16-??? 24”, 30” or 36” round or 24” or 30” square 15 16 1 $697
CF-SQDK-03-20-??? 42” round or 36” square 15 20 1 $735
CF-SQDK-03-26-??? 48” round or 42” square 15 26 1 $865
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
beacon power base
- tables tops are sold separately- allows cords to pass through the base and exit at the bottom underneath the disc base- top plate allows for centered power grommet- 3" x 3" square column- top and bottom plates are bolted to column, field assembly required- glides have 1/8" adjustability and raise the base 1/4" above the floor- powdercoat finish- available in occasional, desk and standing heights
detailsdetails
silver black white
finishes
15"
Occasional Height
compliant electrical units - AC-ELV1-01- AC-ELV1-01-USB - AC-ELV1-07- AC-ELV1-07-USB - AC-ELCV-1RND
- AC-ELCV-2RND - All AC-ELCV-?? units, except AC-ELCV-MINI - AC-PWRG-02- AC-PWRG-03
For 48" Round or 42" Square Table Tops
12"
12"26"
dimensions 26"
12"
12"20"
20"
10"
10"16"
16"
For 42" Round or 36" Square Table Tops
For 24", 30" and 36" Round or 24" or 30" Square Table Tops
dimensions
For 48" Round or 42" Square Table Tops
12"
12"26"
26"
12"
12"20"
20"
10"
10"16"
16"
For 42" Round or 36" Square Table Tops
For 24", 30" and 36" Round or 24" or 30" Square Table Tops
- Includes leveling glides.- To order, replace "???" with SLV for Silver, BLK for Black or WHT for White finish.
pricing
CF-SQDK-EL03-16-??? 24”, 30” or 36” round or 24” or 30” square 15 16 1 $896
CF-SQDK-EL03-20-??? 42” round or 36” square 15 20 1 $931
CF-SQDK-EL03-26-??? 48” round or 42” square 15 26 1 $1,061
Model Number
Table Top Size Base Size Bases
Included PriceBase Height
179178 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
ML-PRPL-03-15-??? 18" round; or 18" square 15 15 1/4 1 $501 $560
ML-PRPL-03-20-??? 24" round; or 24" square 15 20 1 $507 $566
ML-PRPL-03-26-??? 30" and 36" round; or 30" square 15 26 1 $548 $607
venice x-base
details- tables tops are sold separately- 2-1/4" steel column and feet are cast aluminum- maximum table size: 54" diameter or 42" square - available in occasional, desk and standing heights- fully welded construction of top plate to column- aluminum feet are bolted to steel column, field assembly required- glides have 3/4" long stem- 13 gauge tube steel
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
For 30" and 36" Round and 30" Square Table Tops
15"
Occasional Height
For 24" Round and 24" Square Table Tops
8"
8"15-1/4"
15-1/4"
For 18" Round and 18" Square Table Tops
dimensions
pricing Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
orientation for mounting x-bases on square table tops
table tops for venice x-bases
squareround
silver black white
finishesstandard - powdercoat
premium
polished chrome
brushed chrome
Occasional Height
8"
8"20"
20"
8"
8"26"
26"
181180 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
zuma base
details- tables tops are sold separately- 1-1/2" steel offset column and base- bolted construction of top and bottom plates to column - plastic glides for carpet and hard surfaces, no adjustment- 13 gauge tube steel - ships unassembled, field assembly required silver black white
finishesstandard - powdercoat
premium
ML-LAPT-RND 20" round 24 1/4 14 1 $804 $986
- Includes leveling glides.- To order Standard finish replace "???" with SLV for Silver, BLK for Black or WHT for White finish. - To order Premium finish replace "???" with PCH for Polished Chrome or BCH for Brushed Chrome finish.
pricing Model Number Standard
Table Top Size Base Size Bases
Included PremiumBase Height
Round Table
dimensions
6"
8"10-1/2"
15-1/2"
14" x 20" Maximum Rectangular Table Top
Front View
24-1/2"
8"
Side View
6"
8"
14"
14"
20" Maximum Diameter Round Table Top
Front View
24-1/2"
11-7/8"
Side View
round laptop table rectangular laptop table
ML-LAPT-RECT 14" x 20" rectangle 24 1/4 15 1/2 1 $813 $995
Rectangular Table
183182 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
SS-CYLT-1818 18 18 18 $786
SS-CYLT-2424 24 24 18 $821
SS-CYLT-2429 24 24 29 $892
Model Number Depth Width HPL OnlyHeight
SS-CUBE-2020 20 20 18 $792
SS-CUBE-2424 24 24 18 $821
SS-CUBE-2429 24 24 29 $892
Model Number Depth Width HPL OnlyHeight
balboa
details- HPL only- concealed levelers- hollow interior- can accept electrical units
cylinder table
square table
details- tables tops are sold separately- built-in wire management through the leg- heavy gauge steel construction- powdercoat finish- made in america
torrey leg
dimensions
Maximum 48" Square Table Top
Minimum 26" Square Table Top
11"
9-13/16"
16-3/4"
1-7/8"
minimum and maximum table sizes
Side View Cover Panel View
Top ViewMaximum 60"
Round Table Top
Minimum 32" Round Table Top
4"
- May only be used on round tables of 48" or less.- Includes leveling glides.- To order, replace "??" with MN for Midnight, HG for Heather Grey, FS for Fresh Snow, AS for Asphalt, BR for Barn Red, BO for Blodd Orange, SN for Sunset, LY for Lemon Yellow, DM for Denim, DO for Deep Ocean, HU for Hunter and MO for Moss.
pricing Model Number
MAX Table Top Size Leg Size Legs
IncludedLeg
Height
ML-TRAP-17-?? 60" round or 48" square 16 3/4 4 1 $194 $213
Occasional Height
Standard Premium
185184 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
SS-CTBL-2448-?? 24 48 16 $649 $780 $861
Model Number Depth Width B CA
A1
B1
C1B2
C2B3
Height
SS-ETBL-2424-?? 24 24 18 $617 $748 $827
Model Number Depth Width B CA
A1
B1
C1B2
C2B3
Height
SS-STBL-1660-?? 16 60 29 $710 $837 $913
Model Number Depth Width B CA
A1
B1
C1B2
C2B3
Height
doheny
details- constructed of all 3/4" material with 1-1/8" thick top- front and back are open - available with wood edges- concealed levelers- hollow interior- can accept electrical units
occasional table coffee table
occasional table end table
occasional table sofa table
187186 deskmakers.comdeskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
- Units have same legs as used in TeamWorx desking.- TFL model has 2MM PVC edgebanding.- Contact customer service for additional sizes.
SS-CUBL-2020-? 20 20 18 $735 $1,012
SS-CUBL-2424-? 24 24 18 $795 $1,042
SS-CUBL-2429-? 24 24 29 $856 $1,113
Model Number Depth Width TFLHeight HPL
TFL Model HPL Model
solana
details- constructed of all 3/4" material - legs are 5" high- levelers are 3/8" high- TFL model has 2mm PVC edgebanding- hollow interior- can accept electrical units
cube table with legs5" high steel legs
189deskmakers.com
meeting cafe training occasionaltable of contents tables
Credenzas 190-191Lecterns 192Conference Board 193
Cafe storagetable of contents
191deskmakers.com190 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
CF-BUFM-1960-?? 19 60 36 $2,186 $2,537 $2,567
CF-BUFM-1966-?? 19 66 36 $2,200 $2,556 $2,584
CF-BUFM-1972-?? 19 72 36 $2,236 $2,592 $2,627
CF-BUFM-1978-?? 19 78 36 $2,380 $2,750 $2,813
CF-BUFM-2460-?? 24 60 36 $2,212 $2,565 $2,594
CF-BUFM-2466-?? 24 66 36 $2,226 $2,581 $2,611
CF-BUFM-2472-?? 24 72 36 $2,262 $2,618 $2,654
CF-BUFM-2478-?? 24 78 36 $2,406 $2,777 $2,840
CF-MCRZ-1960-?? 19 60 29 $1,924 $2,182 $2,299
CF-MCRZ-1966-?? 19 66 29 $1,938 $2,200 $2,317
CF-MCRZ-1972-?? 19 72 29 $1,974 $2,234 $2,360
CF-MCRZ-1978-?? 19 78 29 $2,116 $2,482 $2,546
CF-MCRZ-2460-?? 24 60 29 $1,950 $2,296 $2,326
CF-MCRZ-2466-?? 24 66 29 $1,966 $2,315 $2,345
CF-MCRZ-2472-?? 24 72 29 $1,999 $2,350 $2,386
CF-MCRZ-2478-?? 24 78 29 $2,142 $2,510 $2,573
Accessory Furniture
Standard Height Media Credenza4 Door - 3 Bay
- Includes adjustable glides.- 12" x 12" cut-out centered on back panel for wire access and venting.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Three locks required for this unit.
Model Number Depth Width B CA
A1
B1 C1
B2 C2
B3 C4
Height
Buffet Height Media Credenza4 Door - 3 Bay
- Includes adjustable glides.- 12" x 12" cut-out centered on back panel for wire access and venting.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Three locks required for this unit.
Model Number Depth Width B CA
A1
B1 C1
B2 C2
B3 C4
Height
CF-BUFC-1960-?? 19 60 36 $1,990 $2,337 $2,365
CF-BUFC-1966-?? 19 66 36 $2,003 $2,355 $2,384
CF-BUFC-1972-?? 19 72 36 $2,039 $2,390 $2,427
CF-BUFC-1978-?? 19 78 36 $2,183 $2,549 $2,614
CF-BUFC-2460-?? 24 60 36 $2,017 $2,363 $2,392
CF-BUFC-2466-?? 24 66 36 $2,029 $2,382 $2,411
CF-BUFC-2472-?? 24 72 36 $2,064 $2,416 $2,453
CF-BUFC-2478-?? 24 78 36 $2,209 $2,576 $2,641
CF-BCRZ-1936-?? 19 36 36 $1,429 $1,660 $1,681
CF-BCRZ-1966-?? 19 66 36 $2,486 $2,849 $2,878
CF-BCRZ-1972-?? 19 72 36 $2,522 $2,886 $2,921
CF-BCRZ-1978-?? 19 78 36 $2,668 $3,046 $3,110
CF-BCRZ-2436-?? 24 36 36 $1,465 $1,674 $1,695
CF-BCRZ-2466-?? 24 66 36 $2,512 $2,876 $2,905
CF-BCRZ-2472-?? 24 72 36 $2,547 $2,730 $2,767
CF-BCRZ-2478-?? 24 78 36 $2,694 $2,893 $2,959
Buffet Height Credenza with Drawers4 Door/4 Drawer - 2 Bay
- Includes adjustable glides.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Two locks required for this unit.- Drawers do not lock.
Model Number Depth Width B CA
A1
B1 C1
B2 C2
B3 C4
Height
Accessory Furniture
Buffet Height Credenza4 Door - 2 Bay
- Includes adjustable glides.- No wood edge on back.- Lock NOT standard. For lock on doors per bay, add OP-LOCK-ADD for $89. Two locks required for this unit.
Model Number Depth Width B CA
A1
B1 C1
B2 C2
B3 C4
Height
193deskmakers.com192 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tables
LecternAngled Worksurface
Model Number Price
CF-LTN1-2437 25 24 37-43 $1,036
Depth Width Height
- All 3/4" material. - Standard with casters.- Includes grommet in worksurface with pass-thru grommets on middle shelf and bottom for wiring.- Add OP-LCTN-DOOR for $145 to add two 28" high doors.
LecternFlat Worksurface and Keyboard Tray
Model Number Price
CF-LTN2-2437 25 24 37-43 $1,206
Depth Width Height
- All 3/4" material. - Standard with casters and keyboard tray.- Flat worksurface is at 38" high. - Includes grommet in worksurface with pass-thru grommets on middle shelf and bottom for wiring.- Add OP-LCTN-DOOR for $145 to add two 28" high doors.
CF-MDCB-3636 6 36 36 $1,463
CF-MDCB-4848 6 48 48 $1,637
Conference Board2 Door
Model Number PriceDepth Width Height
- All 3/4" material. - Standard with laminate on inside of doors. Add OP-CONF-WTDR for $341 to add white board to both doors.- Use with special dry-erase markers. Markers not included.- Full-face (outset) doors.
Accessory Furniture
195deskmakers.com194 deskmakers.com
meeting cafe training occasionaltables table of contents meeting cafe training occasionaltable of
contents tablesTerms and Conditions
Please see website for current Terms and Conditions:www.deskmakers.com
Warranty
(Effective for Furniture Sold as of January 1, 2015)
DeskMakers, Inc. furniture is warranted against defects in material and workmanship given normal usage and care for as long the original purchaser owns it.
DeskMakers will repair or replace at its option, and at its own cost, any product that develops a defect during the warranty period. In some cases, DeskMakers may elect to refund the customer’s original purchase price (less reasonable depreciation) in lieu of repair or replacement. Repair, replacement, or refund is the purchaser’s sole remedy, the choice of which rests solely with DeskMakers. DeskMakers shall not be liable for any incidental or consequential damages including lost profits and loss of use of product.
Limitations:
• The warranty for wood guest chair frames shall be limited to 10 years. • The warranty for PVC edges, wood veneer edges, HPL edges, mechanical parts such as ball bearing slides, door hinges, floor glides, fabric (except for COM fabrics), seating foam, and wood veneer surfaces shall be limited to five (5) years. • The warranty for training tables shall be limited to three (3) years. • The warranty for engineered-to-order “custom” products shall be limited to three (3) years. • The warranty for height adjustable bases shall be limited to two (2) years on electrical components, five (5) years on mechanical components and ten (10) years on structural components. • This warranty does not cover: o Normal wear and tear. o The color fastness of any laminate, wood, or fabric, as such colors can fade or darken with normal use and as a result of exposure to light. o Customer’s Own Materials (COM). o Damage caused by placing anything other than hanging files in file drawers. o Rental furniture. o Labor and service.
Normal Usage:
This warranty does not apply to damages or failures resulting from misuse, abuse, negligence, or improper care. For casegoods, tables, and desking, normal usage is limited to 40 hours per week. For seating, normal usage is limited to 40 hours per week by individuals of 250 lbs. or less.
Limited Lifetime Warranty
Phone: 323.264.2260 | Fax: 323.725.6960www.deskmakers.com
Los AngelesDeskmakers Headquarters6525 Flotilla StreetCommerce, CA 90040
Showroom Locations