table of contents - scientific.net · table of contents preface, program committee and sponsors...
TRANSCRIPT
Table of Contents
Preface, Program Committee and Sponsors
Chapter 1: Films, Ceramics and Glasses
Micromechanical Properties of Glass-Filled Polyamide 6D. Manas, M. Ovsik, M. Manas, M. Stanek, P. Stoklasek, M. Bednarik and A. Mizera 3
Effect of Sintering Temperature on Phase Formation and Dielectric Properties of PLZT-BTCeramicsL. Chumprasert, N. Funsueb, A. Limpichaipanit and A. Ngamjarurojana 7
Research on Mechanical Characteristic of Micro-Nano Structure TaC Ceramic byNanoindentationT.T. Shao, X.L. Cai, J.F. Wang, L.S. Zhong, N.N. Zhao and Y.H. Xu 11
Initial Growth Mechanism of Atomic Layer Deposited Hafnium Dioxide UsingCyclopentadienyl-Type Precursor: A Density Functional Theory StudyG.F. Zhou and J. Ren 16
Effects of Al(OH)3 on the Structure and Properties of Foam Ceramics Cemented byPhosphateC.Y. Jia, R. Ding, J.C. Liu, A.F. Liu and D.X. Teng 21
Micro-Drilling of Pre-Sintered Alumina CeramicM.L. Wang, J.Z. Li, Z.Y. Yu and X. Li 27
Influences of Pre-Sintered Ceramic Compacts Processing Parameters on Tool WearX. Li, J.Z. Li, Z.Y. Yu, M.L. Wang and S.H. Xu 32
Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of RedCeramicsD.V. Ribeiro, S.C. Figueiredo, A.T. Machado, F.R. Valenzuela Diaz and C.A.C. Souza 38
Compositional Dependence of Residual and Interfacial Stresses in Thin Film Systems withSubstantial Thermal Mismatch CharacteristicsI. Dobovšek 43
Preliminary Structure Characterization of UV Curing Paint FilmJ.J. Qi, M.B. Shuai, Y.L. Zhou and F.W. Chang 49
Novel Ordered Layered Double Hydroxides Ultra Thin Films Functionalized with Dawson-Type Polyoxometalates: Synthesis, Characterization and Photocatalytic Behavior underVisible LightJ.P. Wang and D.F. Li 53
Effect of the Iron Ion Doping in LaCoO3 Perovskite, Both in Powders and in SinteredSamples Obtained from Combustion Reaction and Solid State RouteD.V. Ribeiro, G.R. Paula and M.R. Morelli 58
Improving the Surface Wettability of Parylene C Film by Hyperthermal Hydrogen InducedCross-Linking TechnologyH. Shao, C.Y. Tang, M.B. Shuai, K.Q. Xu, Y.L. Zhou, X. Hu and J.J. Qi 64
Effect of Cooling Rate, Tungsten Fiber Addition and Annealing on Deformation andMechanical Properties of Zr-Based Bulk Metallic Glasses Under a NanoindenterY. Si 68
Effect of Ce Substitution on Mechanical and Thermal Properties of Tetragonal YSZ: First-Principles CalculationsL. Jin, P.Z. Li, G.D. Zhou, W. Gao, J.N. Ma, W. Zhang and C. Wang 73
Effect of Sc, Y, Yb, Hf, Ce on Mechanical and Thermal Properties of La2Zr2O7: First-Principles CalculationsL. Jin, P.Z. Li, C.Z. Jiang, G.D. Zhou, H.B. Zhou and C. Wang 85
Piezoelectric and Ferroelectric Properties of KNN-LS-BF1-xCx CeramicsH. Wang, X.Y. Zhao, J.W. Xu and L. Yang 94
Investigation of Preparation and Thermoelectric Properties of Ca2.5La0.5Co4O9 PorousCeramicsP.X. Ji, H.M. Zhang and A.M. Chang 98
Contemporary Approaches in Material Science and Materials Processing TechnologiesContemporary Approaches in Material Science and Materials Processing TechnologiesContemporary Approaches in Material Science and Materials Processing TechnologiesContemporary Approaches in Material Science and Materials Processing TechnologiesISBN(softcover): 978-3-03835-514-4 ISBN(eBook): 978-3-03826-984-7
Chapter 2: Electrochemistry, Chemical Materials and Technologies
Study of Leaching Zinc from Difficult Dealt Zinc Oxide Ore with High Silicon in the AlkaliY.J. LI and D.J. Yang 105
Synthesis and Salt Resistance of Novel Polyampholyte P(DMAPMA-co-HEA)-CAX. Li, M.J. Cai, J.D. Chen and M. Taha 110
Electrochemical Properties of Chemically Etched-NbO2 as a Negative Electrode Materialfor Lithium Ion BatteriesY.H. Cho, S.K. Jeong and Y.S. Kim 115
A Preliminary Study on Li4Ti5O12 as a Novel Electrode Material for Calcium Ion BatteriesC.S. Kim, Y.T. Jeong and S.K. Jeong 119
Effects of Preparation Conditions on Alkali-Activation Reactivity of Chemosynthetic Al2O3-2SiO2 PowdersD. Huang, W.L. Lu, J.Y. Pang, G.W. Mo, S.J. Yu and G.J. Zheng 123
Study of Circulation of Reaction Liquid in Liquid Phase Synthesis of LiFePO4 as CathodeMaterialJ.J. Ma, J. Zhou, X.M. Zu and X.Y. Wang 128
Synthesis of Li2Fe0.5Mn0.5SiO4/C as Cathode Material for Lithium-Ion Batteries UsingAmorphous Li2SiO3P. Novikov, A. Silin, Q.S. Wang and A. Popovich 132
Study on Using Chenghe Fly Ash to Prepare 4A Molecular SieveJ.L. Yang, M.L. Du and T.Q. Zang 137
Preparation of CMC-PVA/PAN-FePc(COOH)8/CS-PVA Bipolar Membrane and itsApplication in Electro-Oxidized Synthesis of Dialdehydle StarchZ.G. Li, T.J. Zhou, R.Y. Chen, X. Chen, X. Zheng and Z. Chen 141
Lightweight Foams with Open-Cell Structure Prepared by Pickering High Internal PhaseEmulsionsY.Q. Chu, Y. Hua, Y. Zhu, S.M. Zhang and J.D. Chen 148
Synthesis of and Characterization of Polyhedron of Mn2O3 Nanoparticles Using Spent Zn-Mn BatteriesF. Xu, J.X. Yin and M. Yang 154
The Stability Study on Vanadium DioxideD.X. Li, W.X. Huang, L.W. Song and Q.W. Shi 158
Supramolecular Complex Formed by Fumaric Acid and Piperazine: Crystal Structure, andSynthon CooperationS.Y. Wang, P.Q. Xing, X.J. Geng and R.X. Chen 168
Hydrothermal Synthesis and Structural Characterization of Orthorhombic LiMnO2 withLow Stacking FaultsL.Z. Zhao and G. Chen 174
Crater Structure and Photoluminescence of Porous SiliconQ.L. Chang, Y.L. Yan and W. Kun 179
Tuning the Pore Size of Monodisperse SBA-15 SpheresC. Guo, M.Z. Liu and W.Z. Li 183
Shape-Controlled Synthesis and Pattern Recognition of Core-Shell Co-Al HydroxidesSuperstructuresP.C. He, X.B. Ji, Q. Zhang, Y.F. Liu and W.C. Lu 188
Application of Multifunctional Scouring Agent for Cotton Fabric BleachingM.A. Hamzah, F. Liu, L.W. He, Y.J. Cai and P. Zhang 193
Improvement of Light Fastness of Liyuan Blue FL-RN Reactive DyeZ. Latif, F. Liu, L.W. He and Y.J. Cai 198
Pilot-Scale Study on Masking Agents for Titanium TanningM. Puccini, M. Seggiani, C. Pomelli and S. Vitolo 203
Waste Solid Byproducts of Microalgae Oil Made into Green EnergyS.Y. Tsai, B.F. Hwang, T.C. Wu, G.Y. Lu and C.P. Lin 208
b Contemporary Approaches in Material Science and Materials ProcessingTechnologies
Chapter 3: Nanomaterials and Nanotechnologies
Synthesis and Characterization of Poly(o-chloroaniline) Micro/Nanostructures in a NovelRedox SystemM. Zhang, D.H. Sun and Y. Wang 215
Controllable Synthesis of Functional Polyaniline Nanotubes via a Complex TemplateY. Wang, D.H. Sun and Y.F. Guo 220
Preparation and Characterization of Silica/Polymer Hybrid Submicron Particles via aSemi-Continuous Soap-Free Emulsion PolymerizationJ.Q.S. Li, Y.Q. Wang and H. Wang 225
Preparation of Silica/Polymer Hybrid Nanoparticles via a Semi-Continuous Soup-FreeEmulsion PolymerizationJ.Q.S. Li, H. Wang and Y.Q. Wang 233
Nanocrystalline Diamond Film Deposited by Double Bias-Voltage Assited HF-PECVDSystemY. Zhang, E.L. Zhang and Z.L. Lin 243
Effect of n-LaB4O7 Additive on Tribological Behaviors of Ion Nitrocarburized Layer atHigher TemperatureC.H. Hu, J. Xue, Y.K. Wang, Y.Z. Li and Z.C. Deng 249
Effect of n-Na2B4O7 Additive on Tribological Performances of Ion Nitrocarburized LayerC.H. Hu, H. Jiang, Y.F. Du, H.P. Wang and Z.C. Deng 254
Preparation and Characterization of W@SiO2 Shielding Composite MicrosphereZ.S. li, Y. Zhang, Y.J. Liu, J. Fang and W.L. Luan 260
The Optimum of Preparation and Characterization of Aerogels like Hydrophobic Titaniaby Ambient Pressure DryingJ. Chen, B. Zhang, M.Q. Wei, J. Men and G.W. Miao 264
Fabrication and Characterization of Nano-Sized Starch ParticlesH. Lin, Q. Li, M. Feng and L.Z. Qin 275
Solvothermal Synthsis of Nano-Sized Li4Ti5O12 Particles as Anode Material for Lithium IonBatteriesY. Zhang, Y.J. Zhu, Y.X. Gu and R.X. Chen 281
Kinetics and Thermodynamics of Adsorption of Cr(VI) on Nano Magnetic NiFe Particles inan Aqueous SolutionL. Zhang, K.G. liu, Z.W. Zhang and Y. Liu 286
Cobalt Monoxide Nanoparticles Modified Glassy Carbon Electrodes as a Sensor forDetermination of NitriteG.J. Huang, J.L. Zhang and D.D. Zhao 291
Synthesis and Characterisation of WS2 IF Nanoparticles via Solid-Gas Reaction betweenWO3 and SY. Wen, H.A. Yeprem and S.W. Zhang 299
Research on the Surface of Nano H68 Alloy Surface Corro Sion MechanismY.R. Zhou and X.L. Qiu 304
PLA Nanofiber Formation during Solution BlowingR.P. Wang, W.L. Han, J. Gu, C.C. Xing and L.H. Yang 311
Fabrication of Through-Hole TiO2 Nanotube Arrays by Bilayer Ti Foils AnodizationZ.N. Ding, Z.J. Kong, H.Y. Liu, Y.F. Chen and Z.K. Zhang 315
Preparation and Characterization of Carbon/CNTs Hybrid Nanofibers via a SimpleElectrospinning RouteT. Zhang, L. Xia, G.W. Wen and X.X. Huang 321
Synthesis and UC Luminescence Properties of NaYF4:Yb,Er MicrosheetsZ.B. Lu, F. Tao, Z.J. Wang, L. Liu, D.C. Ruan, Q. Liu and Y.F. Sun 326
Property Research of Silk Fibroin Nanofibers by Electrospinning Dissolved in CaCl2-Formid AcidY. Zhou and H.Y. Wu 331
Silver Liquid-Like Film Prepared by Self-Assembly for Magnetic Fluid Deformable MirrorsL.K. Min, Z.Z. Wu and M. Liu 337
Advanced Materials Research Vols. 1120-1121 c
Preparation and Adsorption Properties of Starch-g-Polyacrylamide/MontmorilloniteNanocompositesC.N. Zhang and X.M. Wang 343
Facile Synthesis of Co3O4/Nitrogen-Doped Graphene Composite and their ElectrochemicalPerformancesW.X. Bao, Q.L. Zhou, T.Y. Zhang, W.L. Li and Z.Y. Ren 347
Biodegradable Oph-POSS/Poly(Lactic Acid) Nanocomposites: Morphology, ThermalStability and Degradation PropertyJ. Sun, Q.Q. Zhao, Z.Y. Cao, H.N. Lv, C.Q. Wang and Z.S. Cai 352
Preparation and Properties of CNTs Reinforced BMI/DBA NanocompositesS. Li, X.Y. Zhao and X. Wang 357
Excimer Laser Crystallization of Nanocrystalline Silicon Thin FilmsL.J. Deng, W. He and Z.P. Li 361
The Application of Nanoparticles in Enhancing Oil Recovery by Wettability AlterationJ.F. Jin, Y.L. Wang and F. Liu 369
Measuring Microscopic Properties of a Single-Crystalline Diamond by Nano-IndentationTechnologyQ.L. Wei, X.B. Yue, X.Y. Li, B. Liu, X.F. Zhang and D.J. Lei 378
Research on Hall Effect of Graphene by Var Der Pauw MethodY.X. Hui, N. An, K. Chen, X.J. Li, W.L. Li and Z.Y. Ren 383
Chapter 4: Materials for Microelectronic Industry and MagneticMaterials
Surface Morphology of AlN Nucleation Layer Grown on Si by MOCVDS. Fan, L. Yu, X.L. He, P. Han, C.C. Wu, J.P. Dai, X.F. Li, B. Liu, L.Q. Hu, Z.L. Xie, X.Q. Xiu,C. Peng, D.J. Chen, H. Zhao, X.M. Hua, R. Zhang and Y.D. Zheng 391
Hydrothermal Synthesis and Luminescent Properties of Spherical LaPO4:Ln3+ (Ln3+= Eu3+,Dy3+, Ce3+, Tb3+)J. Dai, G.C. Li, M. Lv, R.S. Zhou and X. Li 396
Impact of Doping of Bi3+ on Luminescent Properties of Red Phosphors Sr3-xGaO4F:xEu3+
R.Y. Liu, Y.Z. Feng and Z.F. Peng 401
Study on Influence of Ca2+ Ions Doping at a Site on Magnetic Properties andMagnetocaloric Effect of Nominal Compositions La1.4Sr1.6-xCaxMn2O7Y. Zong and D. Kang 406
Observation of Substrate Silicon Incorporation into Thin Lanthanum Oxide Film duringRapid Thermal AnnealingJ.Q. Zhang, D.Q. Yu, H. Wong, K. Kakushima and H. Iwai 414
Photoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved LiquidPhase DepositionC.X. Lei, X.L. Jiang, Y. Liu, X. Liu, Y.T. Ma, S. Yang, S.Z. Qin, G.S. Zhang and Z.D. Feng 419
Anomalous Hall Effect of the Co Thin Film Deposited by High-Pressure MagnetronSputteringC.Y. Zou, L.S. Wang, X. Liu, Q.F. Zhang, J.B. Wang, Z.L. Huang, X.Z. Wang, Q. Luo and D.L.Peng 424
The Optical and Electrical Properties of Al and (Al, Cu) Doped ZnO FilmD.D. Wang, Q.Q. Fang and J.J. Yang 429
Temperature Dependent Current-Voltage Characteristics of n-Type β-FeSi2/Intrinsic Si/p-Type Si HeterojunctionsN. Promros, D. Prajakkan, N. Hongsa, N. Suthayanan, P. Sittimart, M. Takahara, R. Baba, T.M.Mostafa, M. Shaban and T. Yoshitake 435
Effect of Neodymium on the Glass-Forming Ability and Magnetic Properties of Fe-BasedBulk Amorphous AlloysH. Man 440
Synthesis Photosical Properties of Silicon-Containing Cross-Linked PolymerB.X. Yang, Q.Y. Ma and J.Q. Li 446
Structure, Magnetoresistance and Electrical Properties of La0.8SrxCa0.2-xMnO3 CompoundsS.Q. Jiang, G. Wang, Q. Zhang, J.N. Hou and Z.H. Wang 451
d Contemporary Approaches in Material Science and Materials ProcessingTechnologies
Effect of Pr on Wettability and Mechanical Property of Sn-0.3Ag-0.7Cu Lead-Free SolderX.L. Feng and J. Yang 456
Liquidus and Wettablity of Lead-Free Solder AlloysH.M. Wang 462
Investigation of Ni-Microalloyed Sn-0.5Cu Lead-Free SoldersA. Gyenes, E. Nagy, P. Lanszki and Z. Gácsi 466
Phase-Field Simulation for Effect of Annealing Temperature on Oxygen Clusters’ Evolutionin Silicon WaferJ. Xiang, X.J. Guan and J. Wang 473
Chapter 5: New Functional Materials
Fabrication and Characterization of Anti-Microbial and Anti-Ultraviolet Nonwoven byElectrospinningS.X. Sun, H.Y. Zhao and S.B. Li 481
Investigation of Mid-Infrared Millimeter Wave Radome with Polycrystalline MagnesiumFluorideH. Gu, X. Yu, L.H. He and H.Q. Feng 485
Making Thermoelectric Materials SnxGa1−xNx Alloys by Magnetron Sputtering TechnologyX.L. Guo 490
Orange Peels Derived Activated Carbon as Sulfur Cathode Supporter for Lithium/SulfurBatteriesG.H. Yuan and J.T. Bai 493
Preparation and Performance of Super-Absorbent Resin Using Polyacrylonitrile FiberWastesK.Y. Wang, R.F. Cen and W.W. Shu 498
Research on Mechanical Properties of TiNi Shape Memory Alloy Wires Reinforced AlMatrix Composite MaterialS.N. Yang and S.Y. Yang 502
Effects of Sr Doping Content on the Structure and Morphologies of La0.7SrxCa0.3-xMnO3G. Wang, S.Q. Jiang, Q. Zhang, M. Wu, Z.H. Wang and Z.H. Zhou 507
Chapter 6: Polymers, Composites and Compounds
Characterization of Carbon Composites Properties for Application in Sport IndustryL. Fojtl, S. Rusnáková, M. Žaludek, A. Čapka and V. Rusnák 515
Flame-Retardant Properties of Polyester Fabrics Reinforced Phenolic Resin Modified withSilazanes CompositesX.W. Ren, Y.P. Zhu, F. Wang and H.M. Qi 519
Preparation of Modified Urea-Formaldehyde/Phosphate Foamed Thermal InsulationMaterialX.Z. Huang, L.N. Huang and X.B. Wang 523
Experimental Investigation of Possibilities Vacuum Infusion Technology to ProduceComposite RibsS. Rusnáková, L. Fojtl, M. Žaludek, A. Čapka and V. Rusnák 531
Evaluation of Different Flame Retardant Combinations for Core/Shell Structured Wood-Plastic Composites by Using a Cone CalorimeterM. Nikolaeva and T. Kärki 535
Research on Pipe Clamps Made of Resin Matrix CompositesS.M. Li, Z. Wang, B. Zhang and J.Y. Zhang 545
Synthesis and Characteristic of Borazine-Silicon-Containing Arylacetylene ResinC. Zhou, K.K. Guo, H.M. Qi, Y.P. Zhu and F. Wang 550
Synthesis and Electrochemical Properties of Spherical LiFePO4/C Composite via SprayDryingJ.M. Wang, B. Ren, Y.L. Yan, Q. Zhang and Y. Wang 554
Research on Microstructure and Wear Resistance of (Fe,Cr)7C3/Fe Surface GradientCompositeC. Wang, F.X. Ye, L.S. Zhong, Y.L. Yan, Y.J. Lai and X. Wang 559
Advanced Materials Research Vols. 1120-1121 e
Synthesis, Characterization and Applications of Late-Transition Metal BranchedPolyethyleneW. Yu and D.F. Zhang 564
The Effect of Pre-Crosslinked CTBN on the Mechanical Properties and Morphology ofEpoxy ResinX.X. Song and S. Xu 568
Microstructure of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by SprayDeposition ProcessH.W. Liu, F. Wang, Q. Zhang, X.W. Li, Z.H. Li, Y.A. Zhang and B.Q. Xiong 572
Structure and Properties of Hydrolyzed Cyclization-Crosslinking Flame-RetardantPolyacrylonitrile FiberY.Q. Kang, Y.G. Yang, L.J. Li, Z. Jia and A.R. Ma 576
Nonisothermal Crystallization Behavior of Poly(vinylidenefluoride)/Polysulfone/DiethyleneGlycol Dibenzoate/Dibutyl Phthalate System via Thermally Induced Phase SeparationJ. Zhang, L. Qi and Z.Y. Cui 581
Study of Conductive and Friction Properties of Grease Containing Carbon Black AdditiveP.L. Zhang, G.G. Wang, Y.J. Zhao, H. Wu and Y.Q. Xia 586
Impact Damage Analysis and Experimental Test of Carbon/Epoxy Composite LaminateH.Y. Choi, Y.J. Lim, H.J. Cho and H.B. Park 590
Ethanol Pretreatment on Etching of Nylon 6 Films Using Atmospheric Pressure PlasmaQ.Y. Xiong 593
Microstructures and Mechanical Properties of Zirconium Dioxide Modified Carbon/CarbonCompositesZ.Q. Li, B.H. Nan, G.X. Feng and D.D. Hao 599
Microwave Synthesis of the Composites (α-Al2O3+TiB2)/NiAl from Al-TiO-B-Ni SystemG.H. Guo and H.G. Zhu 604
Microwave Assisted Synthesis of Quercetin-Selective MIPs Grafted on Silica Gel SurfaceY.H. Xie, Y.H. Ding, W.Q. Liu, W.T. Bai and L.P. Huang 608
Synthesis of Ultra-High Molecular Weight Polyacrylonitrile (UHMWPAN) by AqueousSuspension PolymerizationH.Y. Jiang, M.H. Zhou and D. Pan 615
The Formation and Characterization of Poly (p-phenylene benzobisoxazole) Pulps viaStirred SolutionsR.B. Liu, X.X. Li, J. Qian and Z.W. Han 620
Effect of Organoclay Platelets on Crystallization of PTT/EVA-g-MA Blends: Non-Isothermal Melt Crystallization KineticsK.Y. Wang 624
The Preparation of CMC-PVA-AM Dust Suppression Agent and its ApplicationAppraisementY.C. Xiao, C. Zheng, M.K. Gan and S.L. Lai 628
Preparation and Swelling Properties of Organoclay/Super-Absorbent Resin UsingPolyacrylonitrile Fiber WastesR.F. Cen, K.Y. Wang and W.W. Shu 635
Effect of Radiation Dose on the Creep PropertiesM. Reznicek, A. Skrobak, M. Stanek, P. Kratky and D. Manas 639
Preparation of an Active Packaging Material and its Application on StrawberryPreservationY.B. Fu, W.C. Xu, L. Fu, D.L. Li and J.Q. Wang 643
Slashing and Weaving Properties of Twisted Carbon Fiber YarnsQ. Li, L.M. Guo, W.Z. Huang and C. Ling 648
Preparation and Properties of Kevlar or Polysulfonamide Pulp Reinforced ActivatedCarbon Fiber PaperQ.X. Liu, T. Ji, Q. Gao, L.R. Yao, F.Y. Wang and Q.R. Qiu 654
Study on the Mechanical Properties of Carbon Fiber Composite Material of WoodD.J. Shen, Z.S. Lin and Y.F. Zhang 659
Mechanical Properties of the PcBN-Alcomposites are Improved by Pressure InfiltrationW.R. Duan, Z.L. Kou, L.M. Wei, X.H. Yang, C.X. Li and H.Y. Chen 664
General Method for Optimizing Composite Patch RepairsA. Ait Yala and A. Akkouche 670
f Contemporary Approaches in Material Science and Materials ProcessingTechnologies
Chapter 7: Surface of Materials, Coatings and Surface Engineering
Improvement in Corrosion and Adhesion Resistance of a Al2O3-CeO2 NanocompositeCoating on the Aluminum Alloy AA6061 via Surface PretreatmentY.M. Han and M. Farzaneh 677
Ablation Property of the Plasma Sprayed NiCrAlY-ZrO2 Compound Coating on StainlessSteel MaterialZ.P. Deng, Z.H. Liu, H. Zhang and Y. Li 689
Research of Microstructure and Hardness of Co55 and W Coating Made by Laser CladdingW. Zhang 694
Experimental Study of Nano-Al2O3 Particles Reinforced Fe-Based Composite Coating Madeby Laser CladdingW. Zhang 698
The Effect of Graphite Content on the Wear Behavior of Ni/WC/G Composite CoatingG.R. Yang, C.P. Huang, W.M. Song, Y. Ma and Y. Hao 702
Corrosion of 50%(Ni-22%Cr-10%Al-1%Y)-50%(ZrO2-8%Y2O3) Coatings in Na2SO4 and75%NaCl-25%Na2SO4 SaltsD.B. Lee 707
Research of Rust Layer Stabilization on Bare SteelX.Q. Huang, P. Cheng, F.J. Lang, T. Pang, Y. Ma and J.R. Liu 711
Study on Microstructure of the Matrix/Dense Inner Layer Interface in Micro-Arc Oxidizingon Magnesium AlloysX.M. Chen and Q.L. Pan 715
Influence of Oxidation Temperature on the High-Temperature Oxide Film FormingBehavior of T22 Heat-Exchange TubesB.S. Gu, Q. Lu, J.Y. Fu, X.B. Yuan, Y. Wang and P.Y. Yang 723
Influence of Passivation Coatings Synthesized by Atomic Layer Deposition on Li-IonBatteries Cathode Cycle LifeM.Y. Maximov, A.A. Popovich and A.M. Rumyantsev 730
A Effects of Nano-Particles Additives on Wear Performance of Micro-Arc OxidationCoating Prepared on 2A12 Aluminum AlloyJ. Qiu, X.B. Suo, S.N. Ma, G. Shuai and H.M. Wang 735
Study on Microstructure and Fracture Toughness of TaC Ceramic Coating on HT300J.F. Wang, T.T. Shao, X.L. Cai, L.S. Zhong, N.N. Zhao and Y.H. Xu 740
Microstructure and Hardness of NbC Coating Produced In SituX.L. Cai, L.S. Zhong, J.F. Wang, T.T. Shao, N.N. Zhao and Y.H. Xu 745
Synthesis and Characterization of CeO2-Al2O3 Nanocomposite Coating on the AA6061AlloyY.M. Han and M. Farzaneh 750
Numerical Analysis of the Influence of Graphite Nodule Size on the Pitting Resistance ofAustepered Ductile Iron GearsL.H. Accorsi Gans, W.L. Guesser, M.A. Luersen and C.H. da Silva 763
Early Corrosion Behavior of Pipeline Steel Containing 1% Cr in Sea Water EnvironmentZ.G. Liu, X.H. Gao, L.X. Du, J.P. Li and P.J. Hao 773
Investigating the Effect of Hydrophilic Surface Modification on Droplet EvaporationS.C. Wu, S.J. Lin, D. Wang and Y.M. Chen 779
Experimental Study on Laser Melting of Cemented Carbide Coatings by High VelocityOxy-Fuel SprayingX.F. Fan, W. Wu, J. Ye and R.Z. Gong 785
Chapter 8: Biomaterials, Biotechnology and Biochemistry
Conjugation, Identification and Bionomics Analysis of EGFR Targeting Drug TGF α-Saporin as a Bioactive Stent Coating MaterialJ. Yang, F. Li, O. Zeng, J. Luo, Z.X. Wu, T. Xiao and C. Chu 793
Advanced Materials Research Vols. 1120-1121 g
Molecular Mechanism on Inhibition of MB Angiogenesis by Curcumin Blocking the Wnt/β-Catenin and NF-κB Signaling Pathway and Inhibiting the Expression of VEGFs/VEGFRsM. Gao, B. Zeng, X. Zhang and L. Yu 798
Mechanisms of Plant Polyphenol Genistein on Regulation of EMT in Ovarian CarcinomaX. Lin and Y. Li 803
Fabrication of Eprinomectin-Loaded PLGA Microspheres and their In Vitro VeterinaryRelease ProfilesY.G. Zhao, R.Q. Tian, J. Zhang, X.Y. Liang and Q. Shang 807
Influence of Rotation Rate of Collecting Roller on the Mechanical Property of PCL/SFTubular ScaffoldsJ.W. Luo, Z.R. Xia, J. Qu, Y.N. Yu, J. Li and M.Z. Li 813
Plant Compound Curcumin Mediates Calcineurin Activity to Upregulate ABCA1Expression in a Model of Alzheimer’s DiseaseK. Xu, X. Zhang and L. Yu 821
Influence of Hydrodynamic Cavitation on the Viscosity of Raw Sugar SolutionP.F. Wang, Y.C. Huang, X.C. Wu, X.E. Ren and F. Yang 826
Application Research of Lipid Microsphere Biological Carrier Material on Prescription ofTanshinone II a Lipid Microsphere by Central Composite Design-Response Surface MethodX.L. Liang, D. Lv, J. Luo, X.J. Guan and Z.G. Liao 834
Effects and Comparison of Curcumin on Morphology Changes of Chronic CerebralHypoperfusion in Young and Aged RatsD. Li, Y. Xiang, X. Zhang and Y. Li 842
The Progress in Cloning, Expression and Purification of Cholinesterase in Pichia pastoris:One Kind of Biomaterial for the Detection of Residual Insecticide ContaminationJ.J. Tian, Y.H. Xie, X.N. Chen, X. Yue, Z.L. Guo and W.T. Xu 847
Effects of Plant Compound Curcumin on Learning and Memory of Chronic CerebralHypoperfusion RatsL. Tang and Y. Li 853
Production, Characterization and Bioactivity of 46S6 Bioactive Glass from Rice Hull AshSilicaS. Yücel, Z. Aydın Sinirlioğlu, B. Karakuzu, T.M. Temel, Y. Elalmış and A.C. Özarslan 857
Study of Endocrine Disruptors in the Sediment of a South Brazilian RiverI.D. Nascimento, N.C. Vieceli, M. Schmitz and F. Glaeser 862
Preparation and Characterization of Radiopaque Calcium Alginate MicrospheresEmbedded Silver NanoparticlesZ.Q. Li and L. Li 867
Study on Preparation Technology Optimization of Sultamicillin Tosilate-β-CyclodextrinX.Q. Xu, N. Hong, J. Yang, Y.Q. Zhong and L. Cheng 873
Microbial Transformation of Glycyrrhetinic Acid by Colletotrichum lini AS3.4486C.J. He, Y.M. Yang and K.Y. Wu 877
Preparation of Aspirin-β-Cyclodextrin Inclusion Complex by Grinding MethodX.Q. Xu, N. Hong, J.W. Zheng, B.B. Guo and L. Cheng 882
Adsorption and Dehydration of Water Molecules from α, β and γ Cyclodextrins — A Studyby TGA Analysis and GravimetryA.A. Christy 886
Production of Cellulase by Aspergillus niger FC-1 and its Application in Hydrolysis ofCorncob ResiduesH.Q. Shi, Z.W. Zhao, W. Yang, D. Wu, Y. Zhao, J. Zhao, X.M. Fang, L.L. Xie, X.Y. Tian, J. Wuand G.F. Dai 891
Lycopene Nanoparticles Coated with Microemulsions to Improve StabilityZ.F. Lu, Y.Z. Chen, J.F. Ban, G.H. Deng, H. Xin and R.H. Fang 897
Synthesis of Hybrid Fe3O4–Silica–M(Zn, Cu, Ni) Submicrospheres and its Application forAdsorption on Bovine HemoglobinY. Tong, M. Zhang, Y.R. Nie, J.J. Linghu, J.Q. Yu and J.L. Xu 903
Synthesize of Carboxymethyl Chitosan-Graft-Polycaprolactone (CMCS-g-PCL) and thePreparation of MicellesM.R. Zhang, H. Xu and M.D. Lang 909
h Contemporary Approaches in Material Science and Materials ProcessingTechnologies
Characterization and Study on In Vitro Release of Praziquantel from Poly(lactide-co-glycolide) ImplantsL.X. Ma, Z.Q. Fei, C.D. Wang, Y. Liu, X. Du and Q. Wang 915
Antioxidant Properties of Extracts from Curcuma zedoaria RhizomeS.J. Huang, C.C. Chyau, C.H. Tsai, C.C. Chen, J.L. Mau and S.Y. Tsai 920
The Influence of Replant Stress on Hormone and Absorption of Root for Different AppleRootstocksX.J. Guo, R. Wang, Z. Zhang, R. Ge, Z.Q. Mao, L. Guo and X. Shen 926
Finite Element Simulation of Pore Morphology and Stress Distribution of Porous TitaniumC.Y. Wang and B.Q. Li 932
Chapter 9: Metals and Alloys in Industrial Applications
Effect of Mn on the Microstructure and Hardness of Gear Steel Treated by Quenching andPartitioning ProcessY.F. Chen and H.H. Zhang 939
Analysis and Research on Different Thermal Conditions of Copper BarY.L. Xue and W. Qiang 944
Hot Deformation Behavior of Nano-Precipitation Strengthening SteelY. Zhu, H.T. Li, M. Zhang, Y. Zhong and L. Li 951
Effect of the Cooling Time in Annealing at 350°C on the Phase TransformationTemperatures of a Ni55Ti45 wt. AlloyT.C. da Silva, D.M. Rosa and E.P. da Silva 958
Magnetic Field Effect on Creep of Polycrystalline CopperS. Konovalov, N. Yaropolova, D. Zaguyliaev, V. Gromov, Y. Ivanov and A. Semin 962
Evaluation on Interface Bonding of Thin Aluminum Clad Steel StripL. Li, X. Chen, D.J. Zhou and C.L. Tang 967
Sliding Wear Behavior of AM60 Alloys with Alloyed YttriumQ.Q. Zhang 973
Influence of Quench and Tempering Temperature on the Microstructure and Properties of20SiMn2MoVA SteelX.H. Zhang, W.B. Xu, J.W. Gu and S.H. Jiang 978
Effect of Grain Refiner C2Cl6 on Tensile Properties of Squeeze Cast Mg Alloy AM60L. Fang, Y.D. Zou, X.Z. Zhang and H. Hu 983
The Transformation of Martensite and Analysis of its Microstructure and Properties inCarbon SteelY.A. Shen, X.F. Liang, X.F. Sun and X.L. Wang 989
Interface Characterization of Bimetallic Casting with a 304 Stainless Steel Surface Layerand a Gray Cast Iron BaseM. Ramadan 993
Effect of Inclusion on Pitting Corrosion of X80 Pipeline SteelF.J. Lang, X.Q. Huang, T. Pang, Y. Ma, P. Cheng and R. He 999
Microstructure, Texture and Property of Interstitial-Free (IF) Steel after Ultra-FastAnnealingH.L. Cai, J.S. Mou and Z.Y. Hou 1003
Experimental Study of the Fatigue Crack Propagation and Overloading Retardation in TA2PlateH.F. Li, Y. Hong and C.F. Qian 1008
Effect of Cold Deformation on Precipitation of 7050 Aluminum Alloy during Aging ProcessH.W. Yan, L. Zhen and J.T. Jiang 1014
Properties and Microstructure of an Al-Zn-Mg-Cu Alloy ForgingX.W. Li, B.Q. Xiong, Y.A. Zhang, Z.H. Li, H.W. Liu, F. Wang, S.H. Huang and H.W. Yan 1019
Failure Analysis of a 304 Stainless Steel FlangeJ.S. Lu, H.F. Xuan and J. Xue 1024
The Electrochemical Study on Corrosion of Heat Affected Zone of Stainless Steel Weldmentin Seawater under Different Welding ProceduresC.X. Gu, Y.P. Zhu, S.M. Li and X.H. Ren 1029
Advanced Materials Research Vols. 1120-1121 i
Investigation on the Corrosion Behavior of Cast and Extrude AZ61 Mg Alloys in NaClAtmosphere at High Temperature and PressureY. Tian, L.J. Feng and T.Z. Wang 1034
Modeling of Non-Isothermal Ferrite Transformation in Fe-C-Mn-Si AlloysC. Dong, D. Meng, Y.L. He, S.Y. Fu and L. Li 1040
Effect of Pass Deformation on the Microstructure and Properties of Aluminum AlloyAnodes for Fuel Cell ApplicationY. Tang, S.Q. Liang, H.Z. Li and Y. Zhang 1048
Mechanical and Corrosion Behaviors of the Casting Al-Cu Alloy Modified by Nano-ScalePrxOy and LaxOyH.L. Zhao, W. Zhang, C.L. Zhang, D.Q. Sun and X. Wang 1053
The Influence of Different Gas Welding Flame on Corrosion Behavior of the Carbon Steel’sHeat Affected Zone in SeawaterC.X. Gu, G.W. Liu and Y.D. Xu 1059
Effect of Heat Treatment on the Resistivity and Mechanical Property of Low-PressureSemi-Solid Die Cast Aluminum Alloy WheelR. Wang, L.Q. Meng and H.H. Zhang 1064
Study of Micro-Abrasive Wear Resistance of Heat Treated NiTi AlloysP.V. Muterlle, Í. de Barros Casto and P. Herrera 1069
Corrosion and Protection of Magnesium AlloysY.Y. Lv and L.F. Zhang 1078
The Fatigue Crack Propagation of Al–Mg–Mn–Zr Alloy with ErbiumX. Lei, H. Huang and H. Wang 1083
Study on the Thermal Field Distribution of Steel Claws for Anode in AluminiumElectrolysis CellQ.D. Qin 1089
Research on Mechanical Properties of Micro-Electroforming NiJ. Zhang, L. Sui, Z. Wang and G.C. Shi 1093
Compatibility between the Molten Mg-25Al-15Zn-14Cu Alloy and Stainless Steel for Phase-Transformation Thermal Storage FacilityX.L. Ai, X.M. Fan, C. Lei and X.M. Cheng 1099
Study on the Microstructure and Storage Heat Performance of Mg-25Al-15Zn-xCu AlloysH.Y. Wen, X.M. Fan and X.M. Cheng 1104
Relationship of Microstructure and Mechanical Properties in Er-Containing AluminumAlloyX. Lei, H. Huang and S.P. Wen 1109
Influence of Tempertature on Corrosion Behavior of DH36 Steel in Seawater FullImmersion ZoneP. Cheng and X.Q. Huang 1115
Effects of Rotating Magnetic Field on Microstructure and Properties of Bi-ContainingHypereutectic Al-Si AlloyY. Si 1119
Dynamic Compressive Behavior and Damage Mechanism of Magnesium AlloyH.J. He, L.F. Zhang and S.Z. Li 1124
Numerical Simulation of Concentration Field for Be/00Cr17Ni14Mo2 Stainless Steel byDiffusion BondingH. Li, X. Wang, Y. Zhu and P.C. Zhang 1129
In Situ X-Ray Diffraction during Casting: Study of Hot Tearing in Al-Zn AlloysJ.M. Drezet, B. Mireux and G. Kurtuldu 1134
Chapter 10: Materials Processing Technologies
Prediction of Chip Morphology and Formation in High Speed Milling of Hardened SteelsJ.Z. Pang, X.B. Huang, D.D. Chang and J. Pan 1145
Numerical Simulation Analysis for Padding Assisted Roll-Bending ProcessB.G. Chen, Z.B. Huang, X.T. He, L. Liu and Z.B. Zhao 1153
Fluidity of Plastic Blends with a Recycled FillerJ. Navratil, M. Manas, M. Stanek, D. Manas, M. Bednarik and A. Mizera 1158
j Contemporary Approaches in Material Science and Materials ProcessingTechnologies
Improvement of PA6 Mechanical Properties by Radiation Cross-LinkingP. Kratky, D. Manas, M. Manas, M. Stanek, M. Ovsik, A. Skrobak and M. Reznicek 1163
Strength of Bonded Joints of Polypropylene after Radiation Cross-LinkingM. Bednarik, D. Manas, M. Manas, M. Stanek, J. Navratil and A. Mizera 1167
Study of Charpy Impact Properties of PC with Different Amount of Recycled Material andTemperaturesV. Senkerik, M. Stanek, D. Manas, M. Manas, A. Skrobak and M. Ovsik 1171
Micro-Indentation Test of Cross-Linking PolyethyleneM. Ovsik, D. Manas, M. Manas, M. Stanek and M. Reznicek 1175
Irradiation of Polyamide Measured by Micro-Indentation TestM. Ovsik, D. Manas, M. Manas, M. Stanek, A. Skrobak and V. Senkerik 1179
Thermo-Mechanical Properties and Tensile Behaviour of Modified HDPE by Beta Raysafter Temperature Load at 220 °CA. Mizera, M. Manas, D. Manas, M. Stanek, J. Navratil and M. Bednarik 1183
Mechanical Behavior of the Cr3C2 Compound at High Pressure and High TemperatureB.L. Jiang, Z.L. Kou, D.J. Ma, Y.K. Wang, C.X. Li, W.R. Duan and X.H. Yang 1187
Influence of Technological Parameters on Material FlowM. Stanek, D. Manas, M. Manas, V. Senkerik, A. Skrobak and J. Navratil 1194
Micromechanical Properties of Thermoplastic Elastomer (TPE-E)D. Manas, M. Ovsik, M. Manas, M. Stanek, P. Stoklasek, M. Bednarik and A. Mizera 1198
Research on Law and Mechanism of Hydrogen Induced Softening in Ti6Al4V Alloy in theTemperature Range 400 °C to 1010 °CS.H. Huang, Y.Y. Zong and D.B. Shan 1202
Study on the Annealing Process of a Cu-Zn-Al-Ni AlloyX. Fu, W.X. Wang, Y. Li, Y.B. Zuo, P. Wang and J.Z. Cui 1208
Study on the High Shear Degassing Process with Water SimulationY.Y. Kang, Y. Lin, X.D. Liu, C. Sun, S.S. Yuan, Y.B. Zuo and J.Z. Cui 1214
Electromagnetic Micro-Punching Process of T2 Copper FoilQ.J. Zhao, J. Xu, C.J. Wang, D.B. Shan and B. Guo 1220
Research on the Temperature Changes of 20CrNiMoH Steel during Turning ProcessZ.M. Lin, J. Li, M. Jin and H.H. Zhang 1226
Research on Manufacturing the Metal Foams with Regular Cells by 3D PrintingS.Y. Yang, E.T. Zhao and Y.K. An 1233
Experimental Studies of Submicron Polycrystalline Diamond without Binder under HighPressure and TemperatureX.H. Yang, Z.L. Kou, D.W. He, Y.K. Wang, W.R. Duan and H.Y. Chen 1238
Analysis on the Optimal Process of Aluminum Profile Extrusion with Two-Hole DiesC. Miao and H.B. Yang 1246
Experimental Investigations on Cylindrical Grinding Temperature of Silicon CarbideC.J. Wu, B.Z. Li, S.Y. Liang and J.G. Yang 1251
Evaluation of Deep Criogenic Treatment at Microabrasive Wear of Aisi D2 SteelC.R.M. Silva, T.F.O. Melo, J.A. Araújo, J.L.A. Ferreira and S.J. Gobbi 1257
Research of Cold Extrusion Process for the 2A12 Duralumin PistonsH.C. Teng, B.Y. Teng and X.B. Chen 1264
Studying of Microstructure and Properties of Selective Laser Melted Titanium-Based AlloyA.A. Popovich, V.S. Sufiiarov, I.A. Polozov, E.V. Borisov and M.Y. Maximov 1269
Research on the Elimination of Banded Structure in SAE8620H Gear SteelJ. Li, Z.M. Lin, H.H. Zhang and M. Jin 1276
Study on Optimization Design of VSR Parameter for Large Welded ComponentsX. Zhang, X.W. Dong, D. Ren, Y.T. Wang, J.H. Han and Y.Y. Yang 1281
Microstructure and Properties of TA1 TIG Joint via Micro-Arc OxidationY.P. Guo, S.C. Di and H.W. Lv 1287
Prediction of Microstructure and Mechanical Properties of Weld Metal in Hybrid Laser-Arc WeldingV.A. Karkhin, P.N. Homich, S.Y. Ivanov, V. Michailov and O.V. Panchenko 1292
Influence of Machining Parameters of the Drilling Polymers UHMW-PE and PTFEB. Ferreira Lizardo, L. Machado Gomes Vieira, J.C. Campos Rubio and M. Araújo Câmara 1297
Advanced Materials Research Vols. 1120-1121 k
Impact on the Reduction Process of Carbon Containing Pellets with Biomass ReplacingTraditional Reducing AgentP. Yuan, H.L. Han and D.P. Duan 1302
Features and Application of Electron Beam Welding TechnologyM.F. Li and Z.H. Zhu 1308
The Analysis and Improvement of the Influence Factors for the Fabrication of SMTTemplate and Laser Cutting TechniqueY. Tang 1313
Influence of Particle Size of Wheat Powder on Roller Wear PropertiesL.P. Jiang, K.P. Zhang and J.M. Ma 1316
An Experiment Study on Squeeze Test and Flow Behavior Analysis of Concentrated CarbonBlack SuspensionA. Omarbekova, R. Ramachandran, D. Yertayev and D. Smagulov 1320
Development of a Copper Heat Pipe with Axial Grooves Manufactured Using WireElectrical Discharge Machining (Wire-EDM)F.B. Nishida, L.S. Marquardt, V.Y.S. Borges, P.H.D. Santos and T.A. Alves 1325
Development of CNC Five-Axis Turning Tool Cutter GrinderX.W. Wang, Z.H. Wang and M.H. Zhang 1330
Chapter 11: Engineering of Technological Processes
The Effect of External Voltage on Pulsed Electrohydrodynamic PrintingX. Yuan, Z.Y. Ba and Z.H. Xiong 1339
Investigation of the Motion of Materials in Cross Section of a Specific Rotary CoolerZ.B. Chen, Q. Xie, Y.P. Shen and W.Y. Dong 1345
Determination of Gold in Gold Jewelry Alloys by a Synthesis MethodH. Li, S.J. Shi, X. Wang, Y. Zhu, N. Yu and Y.J. Wang 1350
The Influence of Material Properties on the Hydrodynamic Performance of PropellerS. Sun, X. Chang, G.J. Chen and Y.C. Zhi 1356
Research on the Multi-Actuator and Sensor Detecting Technology Based on PiezoelectricComposite MaterialsZ.P. Wang and X.J. Li 1363
Experimental Analysis of a Vapor Chamber Applied to Thermal Management ofMicroelectronicsD.H. de Souza Obata, T.A. Alves, M.A. Bazani and A.T. Paschoalini 1368
Analysis on Influencing Factors of Bus Bar Contact ResistanceS.X. Liu, W.L. Huang and Z.H. Wen 1373
The Study on Porous Media Phase Change Coupling Heat Transfer Model in EnclosedMetal CavityR.H. Wu, J.Q. Liu, X. Liu, A.M. Ren, S.J. Zhang and G. Meng 1378
Signal Detection of Welding Joint Flaw Based on Wavelet-Support Vector MachineX. Yin, Y.P. Liu and X.Z. Feng 1385
Boundary Element Analysis for Piezoelectric Cracks by an Interaction IntegralH.G. Liu, J. Lei, P.B. Sun and Q.S. Yang 1390
Determination of Trace Copper in Vanadium Alloy by Flame Atomic AbsorptionSpectrometryQ. Yang, G.P. Tang, L.F. Tian, Q.L. Wei and C. Wang 1395
Numerical Analysis on Decay Heat Power of Weapon-Grade PlutoniumY.L. Wang, W.L. Yu, X.Y. Xiao and Y.L. Gao 1399
New Materials Applied for the Stationary Phases in View of the Optimized HPLC andUHPLC Column Classification System Used in the Pharmaceutical AnalysisA. Plenis, T. Bączek, J. Szulfer and M. Markuszewski 1404
Mechanical Properties and Fracture Analysis of a Plant Oil Storage Tank AccidentS.S. Fang, L.J. Zhang and G. Tao 1413
Experimental Verification of a Stochastic Fatigue Crack Growth ModelC.C. Ni 1419
l Contemporary Approaches in Material Science and Materials ProcessingTechnologies
Size Effect Mechanism on Foil Rolling Analyzed by Crystal Plasticity Finite ElementMethodS.D. Chen, X.H. Liu and L.Z. Liu 1424
A Computer-Aided-Design (CAD) System for Four-Step Three-Dimensional BraidingQ. Wang and J.M. Wang 1429
Using Simulated Data to Support the Calibration Process of ED-XRF AnalysisD. Koncz-Horváth and Z. Gácsi 1435
Method of Lines to Solve the Linear Temperature Field of LENSC.F. Xue 1441
Chapter 12: Building Materials and Technologies in Construction
The Preparation of a Kind of Interface Treatment Agent for ConcreteS. Zhao, X. Zhang, R.R. Liu, J.P. Fu, X.X. Liu, Y.C. Liang and J.J. Hu 1449
Stress Non-Uniformity Simulation Analysis of Prestressed Steel Strands in Curved DuctH.Q. Cheng, W. Zong, K. Hu and W. Tian 1453
Comparison of Various Techniques for Flexural Strengthening of Thin Concrete MembersUsing Continuous Carbon FibersA. Ivanič and S. Lubej 1458
Studies of High Temperature Performance of Asphalt Based on Repeated Creep andRecovery TestH.F. Xu 1463
Spall Strength of Steel Fiber Reinforced ConcretesL. Zhang, B. Wu and Y. Zhou 1468
Numerical Test Research on High-Strength Concrete Square Columns with High-StrengthAseismic Transverse Reinforcement under Concentric CompressionH. Ding, J.P. Wang and L. Song 1475
Seismic Performance of Natural Fibre Reinforced Polymer-Concrete Bridge PiersJ.X. Chen and N. Chouw 1480
Experimental Study on the Material and Environmental Property of Ancient Adobe BrickJ.L. Yuan, Y. Yang and S.N. Peng 1485
Performance of Ultra-High Strength Concrete Containing Different Types of FibersW.Q. Li, Y. Peng, X.Y. He, X. Wu and L. Huo 1491
Load Transfer Behavior of Cracking for Cement Concrete PavementC.H. Hu and X.Z. Ma 1496
Interface Bonding Property Finite Element Simulation of Mo Fiber-Reinforced PolymerConcreteX.H. Ren, J.H. Zhang, W.Q. Wang and J.C. Yin 1501
The Research on Bond Property of Rubber ConcreteL.Q. Dong, C.F. Liang, X.G. Wang, Z.L. Zhou and Y.L. Chen 1506
Centre of Panel Thermal Conductivity Performance Analysis of Aerocor-CentrifugalHybrid Ultrafine Glass Fiber VIP Core MaterialsA. Farooq and A. Abd El-Aty 1511
Mechanical Properties of Semi-Rigid Steel Frame-Braced Steel Plate Shear WallY.S. Shao and F.R. Shao 1516
Seismic Behavior of Steel Plate Shear Walls-Steel FrameF.R. Shao and Y.S. Shao 1520