table of contents - pa supply

100

Upload: others

Post on 24-Nov-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Da v id
NAME

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TABLE OF CONTENTS

Mission Statement and Berger Locations: 2Snow Retention Systems: 3-13

Real Tool® Snow Guards 3Berger Clear Snow Guards and Caulks 4F-RailTM, E-RailTM & S-RailTM Snow Retention 5Snow Meister Snow Guards 6Berger Residential Snow Guards 6-8Mullane Snow Guards 8-12Technical Information 13

Synthetic Roofing Underlayment: 14EuraCraft Gutter SystemTM: 15-20Embossed Gutter: 21Berger Gutter: 22-24

K-Style Gutter 22K-Style Apron Gutter 23Half Round Gutter 24

Downspouts: 25-26Round Downspouts 25Square Downspouts 26

Elbows: 27-28Round Elbows 27Square Elbows 28

Accessories: 29-44, 49-50Offsets 29Hangers – K-Style 30-33Hangers – Half Round 34-36Shanks – K-Style & Half Round 37-38End Caps – K-Style & Half Round 39Miters – K-Style 40Miters – Half Round 41End Pieces – K-Style & Half Round 42Slip Joints – K-Style & Half Round 42Outlets – K-Style & Half Round 43-44Conductor Heads 49Eave Boxes 50Funnels 50

Featured Product: 45-48Quality Roof Drainage Products, Edgings &

Coil in a Variety of Popular Colors

Accessories: 51-61Cut-Offs & Diverters 51Downspout Tubes 51Pipe Fasteners – Downspout Hooks, Rack & 52-55

Key, Drives, Universal and OrnamentalConductor Bands, Pipe Brackets& Cleats

Miscellaneous – Wire Strainer, Pop Rivets, 56-57Gutter Wedge, Trim Nails, Gutter Mastic,Touch-Up Paint & Pipe Flashing

Gutter Guards, Splash Blocks & 58-60Flex-A-Spout

Step Flashing: 61Roof Edging & Trim: 62-72

“A” Styles 62“B” Styles 62“C” Styles 62-64“D” Styles 65“E” Styles 65-66“F” Styles 66-68“H” Styles 69Vented Drip Edge 69Overhanging Drip Edge (ODE and ODLR) 70Miscellaneous – Drip Caps, Ridge Roll, 70-72

Deck Ledger, Preformed Valley Flashing,Brick Moulding, Corner Flex® Flashing,& Kick-Out Diverters

Aluminum Soffit & Accessories: 73-75Solid & Vented Aluminum & Copper Soffit 73Accessories – AccuVentTM, Fascia, 74-75

F Channel, J Channels, Starter Strip,Soffit Moulding, Soffit Trim &Pro-Master Ridge VentTM

DrySnap™ Under Deck Rain Carrying System: 76Coil Products: 77-80

Aluminum & PVC Trim Coil 77Aluminum & Copper Gutter Coil 77-78Other – Terne Metal, Aluminum / Copper / 78-80

Galvanized Steel Flashing, CopperSheets, Metal Bender Tool & Blades

Technical Reference Appendix: A1-A16

Page 11/07

MISSION STATEMENTAND BERGER LOCATIONS

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Mission Statement

To manufacture the highest quality products and maintain maximum customer satisfac-tion through superior service and competitive pricing. Promote a team atmosphere where

employees will experience challenging and rewarding career opportunities.

Berger Locations

CORPORATE HEADQUARTERS:805 Pennsylvania Boulevard

Feasterville, PA 19053

Ph: 800-523-8852

Ph: 215-355-1200

Fax: 215-355-7738

NEW ENGLAND:101 B H. P. Almgren

Agawam, MA 01001

Ph: 413-786-1713

Fax: 413-786-8964

SOUTHEAST:4455 River Green Parkway

Duluth, GA 30096

Ph: 770-449-6818

Fax: 770-447-4811

MIDWEST:Windham Industrial Center V

1160 West Remington Boulevard

Romeoville, IL 60446

Ph: 630-679-0508

Fax: 630-679-0903

SOUTHWEST:1025 Avenue S, Suite 150

Grand Prairie, TX 75050

Ph: 972-641-1881

Fax: 972-641-7333

WEST:3701-A Pell Circle

Sacramento, CA 95838

Ph: 916-924-1881

Fax: 916-924-0562

Page 21/07

RT® Snow Guard Series - 100 pcs. per ctn.Berger RT Snow Guards are non-penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel setscrews to clamp them in place. They require no glues or sealants, and will not restrict thermal movement or contribute to unsightly oil-canning. RT Snow Guards are available in cast aluminum and cast bronze, and in two sizes to accommodate differing seam widths. Theyare particularly suited to double-lock and mechanically seamed metal roofing, and being traditional in design, they are ideal forrestoration and preservation work.RT-200 Designed to accommodate seams of up to 3/16" (0.188" thick) and no higher than 1 inch. Suited for use with light gauge sheetmetals such as 40lb. terne, 26 gauge galvanized, 16 ounce copper, lead coated copper and TCS.RT-300 Designed to accommodate seams of up to 9/32" (0.297") in thickness and no higher than 1 inch. Suited to heavier gauge metalssuch as 20 ounce copper, 24 gauge prefinished metal and products of similar thickness.

• Available in Mill Finished Aluminum (M), E-Coat (E), Custom Color Aluminum (C) and Bronze- for Copper Roofs (B).• Custom Color (C) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return.

ENTER COLOR/METAL CODE WHEN ORDERING

Seams up to 3/16” Thick & 1 Inch High Seams up to 9/32” Thick & 1 Inch High

Code Price Code Price

RT200__ RT300__

SNOW RETENTION SYSTEMS

Page 31/07

AP Snow Guard Series - 50 pcs. per ctn.Berger AP Snow Guards are non-penetrating devices which have been engineered specifically for use with the more popular structuraland non-structural preformed and architectural metal roof systems. They are secured without glues or sealants, and utilize custom milledstainless steel set screws to clamp them in place. They are produced in cast aluminum, and are available in three different seam widthsand heights. The attachment of the AP Snow Guard does not restrict thermal movement, and the deep throat permits it to be secureddirectly without damaging caps or compressing internal gasketing or sealant pockets. The wide, deep blade design makes it particularlyeffective in retaining snow with the higher seams and wider panel widths common in preformed architectural roofing.AP-300 Designed to accommodate seams of up to 9/32" (0.297") in thickness and at least 1-1/4" high, including high double lockedmechanically closed seams and single locked preformed architectural panels.AP-400 Designed to accommodate seams of up to 3/8" (0.400") in thickness and at least 1-1/2" high, including snap-lock interlockingpanels.AP-516 Designed to accommodate seams of just over 1/2" (0.516") in thickness and at least 1-1/2" high.

• Available in Mill Finished Aluminum (M), E-Coat (E), and Custom Color Aluminum (C).• Custom Color (C) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return.

ENTER COLOR/METAL CODE WHEN ORDERING

Seams up to 9/32” Thick & 1 1/4” High Seams up to 3/8” Thick & 1 1/2” High Seams up to 1/2” Thick & 1 1/2” High

Code Price Code Price Code Price

AP300__ AP400__ AP516__

SM Snow Guard Series - 50 pcs. per ctn.Berger SM Surface Mount Snow Guards are manufactured of cast aluminum and are designed to be adhered to the pan surface ofprefinished metal roofs using either a high strength construction adhesive or a combination of mechanical fasteners and an adhesive/sealant. They are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seammounted device can be fastened, including batten and lap seam panels, and other profiles having a flat surface of as little as 2 3/8" inwidth and space for a 5" blade. The SM Snow Guard is uniquely suited for use on trapezoidal type panels when coupled with thematching RT-300 Snow Guard. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.

• Available in Mill Finished Aluminum (MF), E-Coat (EA) and Custom Color Aluminum (CA).• Custom Color (CA) Requires 3 Weeks Lead Time and is Not Subject to Cancellation or Return.

ENTER COLOR/METAL CODE WHEN ORDERING

Surface Mount

Code Price

SM__ __SG

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

U. S. Patents 5,282,340 and 351,989

U. S. Patents 5,522,185 and 372,421

U. S. Patent 364,338

SNOW

RET

ENTI

ON S

YSTE

MS

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

SNOW RETENTION SYSTEMS

Page 41/07

Clear Snow Guard Series - 50 pcs. per ctn.Berger Clear Snow Guards are manufactured in a crystal clear polycarbonate with U.V. stabilizers. There are two models of the BergerClear Snow Guards: RTCLSR - Structural Ribs and RTCLSM - Surface Mount. The unique vent rib system allows for adhesive outgassing, which increases the shear and mechanical strength. The three to one base to blade ratio adds significantly to the shear and peeladhesion of the device to the surface. Superior engineering, along with the structured ribs, prevent common blade breakage. Berger ClearSnow Guards are also well suited for mechanical attachments and can be attached to any panel having a flat surface of as little as 3-1/2"wide. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.

RTCLSR

RTCLSM

Structural Rib Surface Mount

Code Price Code Price

RTCLSR RTCLSM

SB-1800 Surebond Everflex Cold Weather, High Strength ConstructionAdhesive Caulk - 24, 10.3 oz. tubes per caseThe Surebond Everflex SB-1800 is a cold weather sealant that can be used in temperatures as low as -20 degrees Fahrenheit and fullycures in 24 hours to 500psi shear tensile strength. Under certain conditions, temporary measures may need to be employed to holdthe snow guard in place until initial set of adhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube willadhere 8-10 CL Snow Guards and 14-16 RTMINI Guards. Berger does not warrant adhesive failure. The adhesives are offered for theconvenience of the user who assumes full responsibility for its use. These adhesives are used throughout the industry for adheringsnow guards with successful results utilizing the directions of the adhesive manufacturer. Adhesive failure does not constitute Bergerproducts defect and is not the responsibility of Berger.

Code Price

SB-1800

U. S. Patents 6,266,929 and 418,403

SB-190 Surebond Everseal Warm Weather, High Strength ConstructionAdhesive Caulk - 24, 10.3 oz. tubes per caseA versatile, hard setting, one part adhesive specially designed for a wide variety of industrial sealing. This unique formula possessesup to 2000 lbs. of tensile strength. The SB-190 is a field proven sealant adhesive. This adhesive/sealant requires 28 consecutivedays (672 consecutive hours) with temperatures of 50 degrees Fahrenheit or greater to cure properly. Please follow directions forbest results. Under certain conditions, temporary measures may need to be employed to hold the snow guard in place until initial set ofadhesive has taken place. Available in 10.3 oz. tubes with 24 tubes per case. One tube will adhere 8-10 CL Snow Guards and 14-16RTMINI Guards. Berger does not warrant adhesive failure. The adhesives are offered for the convenience of the user who assumes fullresponsibility for its use. These adhesives are used throughout the industry for adhering snow guards with successful results utilizingthe directions of the adhesive manufacturer. In cold weather, Berger recommends mechanical attachment to the roof structuralmember combined with the adhesive sealant for the best result. Adhesive failure does not constitute Berger products defect and is notthe responsibility of Berger.

Code Price

SB-190

RTMINI Clear Snow Guards - 100 pcs. per ctn.Berger RTMINI Clear Snow Guards are manufactured in a high clarity polycarbonate plastic with U.V. stabilizers which provides strengthand longevity. They have a low visibility and blend with roof materials. The RTMINI has a 1.5" wide base to fit parapet ribbed roofchannels. They are manufactured with a 4.5 square inch holding area, a 2:1 base to blade ratio and a gusseted blade snow pocket thatcombine to effectively retain snow. They can be attached with adhesives, screws or VHB Tapes. The RTMINI features a blade "Snowflake"slot that accepts a metal color chip or custom emblem. Adhesive failure does not constitute Berger product defect and is not theresponsibility of Berger.

Clear Polycarbonate

Code Price

RTMINI

U. S. Patent Pending

SNOW RETENTION SYSTEM

S

F-RailTM Snow Retention System• Accommodates up to 4 Rails of Protection.• The Only Rail Style Snow Fence Available that Functions BELOW the Standing Seams on

Metal Roofs - Helping to Control the Possibility of Dangerous Ice Slides.• Requires NO Penetration of the Roof.• Receiver "Pockets" Make it an Easy-To-Install System.• Easy to Retrofit Existing Roofs.• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof.

Please call Berger at (800) 523-8852 for specifics as these products are quoted as a “system” only.

SNOW RETENTION SYSTEMS

Page 51/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

U. S. Patent 6688047

Mill Finished Aluminum Custom Painted E-Coat Black Primer

Code Price Code Price Code Price

FCSTSF FCSTFP FCSTSFE

E-RailTM Snow Retention System• Dual Rail, Low Profile Snow Retention System.• Stronger and Lighter System that offers between the Seams Protection on Metal Roofs -

Helping to Control the Possibility of Dangerous Ice Slides.• Requires NO Penetration of the Roof and is Easy-To-Install.• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof.• Receptor Slot for Custom Ornamental Attachment. U. S. Patent 6688047

Mill Finished Aluminum Custom Painted E-Coat Black Primer

Code Price Code Price Code Price

ECSTSF ECSTSFP ECSTSFE

S-RailTM Snow Retention System• Single Rail, Low Profile Snow Retention System.• Functions BELOW the Standing Seams on Metal Roofs - Helping to Control the

Possibility of Dangerous Ice Slides.• Requires NO Penetration of the Roof and is Easy-To-Install.• Economical Snow Rail that's Easy to Retrofit to Existing Roofs.• Available in Mill Finished Aluminum, Black Primed, or Berger can Custom Paint to Match the Roof. U. S. Patent 6688047

Mill Finished Aluminum Custom Painted E-Coat Black Primer

Code Price Code Price Code Price

SCSTSF SCSTSFP SCSTSFE

TM

F-RailTM, E-RailTM & S-RailTM Snow Retention System Components• TBSS20 Tubing is available in 16 Gauge Stainless Steel and is 20 feet x 1 inch square. Tubing is Sold by the foot.• TBCR24P Tubing is available in 16 Gauge CR Steel and is 24 feet x 1 inch square, Painted to Match the Roof.• Tube End Caps are available in Black Plastic.• Stainless Self Tap Screws #8 x 1/2".• Stainless Self Tap Screws are Sold by the Bag - 25 Screws per Bag.

TUBING END CAPS SCREWS

Code Price Code Price Code Price

TBSS20 TUBCAP STS812

TBCR24P

SNOW

RET

ENTI

ON S

YSTE

MS

TM

SG-1 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn.These non-penetrating devices are for traditional double lock standing seam roofs 1.0" deep x .250" wide. They fit both 1" and 1-1/2" highseams. The symmetrical design rotates 180 degrees to match seam lock orientation. Painted Aluminum is available in CustomColors. Black E-Coat Epoxy Primer Cast Aluminum requires a final color coat by contractor. Painted Aluminum and Polished Bronzerequire extended lead time and are not subject to cancellation or return. *Polished Bronze is a non-stock, special order.

SNOW RETENTION SYSTEMS

Page 61/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

U. S. Patent 6,499,259

Mill Finished Cast Aluminum Painted Cast Aluminum Black E-Coat Primer Cast Alum. Polished Bronze

Code Price Code Price Code Price Code Price

SG-1MF SG-1C SG-1EBK SG-1PBZ*

SG-175 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. perctn.These non-penetrating Cast Aluminum devices are for snap lock seam roofs 1.75" deep x .475" wide. The symmetrical designrotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy PrimerCast Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject tocancellation or return.

SL-1 Snow Meister Snow Guard Series for Metal Roofs - 50 pcs. per ctn.These non-penetrating Cast Aluminum devices are for single lock T seam roofs 1.0" deep x .575" wide. The symmetrical designrotates 180 degrees to match seam lock orientation. Painted Aluminum is available in Custom Colors. Black E-Coat Epoxy PrimerCast Aluminum requires a final color coat by contractor. Painted Aluminum requires an extended lead time and is not subject tocancellation or return.

U. S. Patent 6,499,259

U. S. Patent 6,499,259

Mill Finished Cast Aluminum Painted Cast Aluminum Black E-Coat Primer Cast Aluminum

Code Price Code Price Code Price

SG-175MF SG-175C SG-175EBK

Mill Finished Cast Aluminum Painted Cast Aluminum Black E-Coat Primer Cast Aluminum

Code Price Code Price Code Price

SL-1MF SL-1C SL-1EBK

SNOW RETENTION SYSTEM

S

Pro 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs -50 pcs. per ctn.This heavy-duty snow guard is available in copper and stainless steel for corrugated, flat, slate and asphalt shingled roofs. Thesuperior design of the Pro 100 includes a 1-inch gusset that reinforces the shoe, which makes this snow guard 5 times stronger thantraditional residential snow guards. The Pro 100 has been tested to withstand a 300-pound point load at any location when applied tothe gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placedslots and pull to fully secure the bar. This style snow guard provides fast installation and is ideal for existing or new constructionapplications with asphalt shingled roofs.

Copper Stainless Steel

Code Price Code Price

SGCP100 SGSP100

SNOW

RET

ENTI

ON S

YSTE

MS

No. 1 Snow Guards for Standing Seam - 100 pcs. per ctn.The roofer’s choice since 1883 for use on standing seam metal roofs. They are pinched to clamp on the top of the seam providing arigid permanent job.

No. 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs -50 pcs. per ctn.This guard has eliminated the necessity of removing slate, avoiding the possibility of breakage. Simply insert the slotted bar under theslate or shingle, engage a nail with one of the conveniently placed slots and pull down to fully secure bar. This style snow guardprovides fast installation and is ideal for existing or new construction applications with asphalt shingled roofs.

No. 100 Snow Guards for Flat Metal Roof Surfaces - 50 pcs. per ctn.Affordable protection for your gutter, foundation or shrubbery. Ideal for mounting to corrugated or flat roof panels. Stainless steel offersno corrosion problems or stains and is suitable for paint to match your roof. The copper guard can be soldered or fastened to copperroof panels. These guards provide 8.75 square inches of stopping area. Holes for #8 screws or rivets. 1" x 2" flat mounting area. Useneoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant (SB-190).

Copper Stainless Steel

Code Price Code Price

SG-CPS SG-SSS

Copper Stainless Steel Galvanized Steel

Code Price Code Price Code Price

SGC100 SGS100 SGG100

Bronze Galvanized Malleable Iron

Code Price Code Price

SGBR-1 SGML-1

SNOW RETENTION SYSTEMS

Page 71/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

No. 20 Snow Guards for Metal Corrugated Roof Surfaces - 100 pcs. per ctn.Designed to fit 1 1/4" or 2 1/2" rounded corrugation. Use neoprene washer screws to fasten. All roof penetrations should be sealed withadhesive sealant (SB-190). It fits on top of the corrugation.

Bronze Galvanized Malleable Iron

Code Price Code Price

SGBR20 SGML20

Modified #100 Snow Guard for Asphalt Shingled Roofs - 50 pcs. per ctn.This is a modified Berger #100 Snow Guard. The #100 shoe is attached to a shorter, solid bar/strap, and is designed for easyinstallation on shingle roofs.

Copper Stainless Steel

Code Price Code Price

SGC100HP SCS100HP

SNOW RETENTION SYSTEM

Page 81/07

SNOW RETENTION SYSTEM

S

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Mullane BRONZE GUARD™ Model #100 Series- 50 pcs. per ctn.A traditional spike style snow guard, from a design first patented in 1899. The Model #100 is historically accurate for periodrestorations, but is just as appropriate for new construction or retrofit application on existing slate roofs. Because of its low profile,this model is more appropriate for residential usage. The Model #100 is for applications on slate, shake, and shingle roofs, and isdesigned to fit between adjacent pieces of roof material, so that only the casting is visible above the roof surface.

Bronze Lead Coated Copper

Code Price Code Price

100CPSM 100LCPSM

#100 Series for Soldering

Bronze for Slate Applications Lead Coated for Slate Applications Bronze for Asphalt Shingle Applications

Code Price Code Price Code Price

100S-NA 100SLC-NA 100S-AS

#100 Series for Nailing on New Installations (Slate or Shingles)

Bronze Lead Coated Copper

Code Price Code Price

100S-RH 100SLC-RH

#100 Series with Retro-Hook for Existing Slate Roofs

No. 95 Snow Guard Assembly for Slate Roofs (Heavy Duty Ornamental)

Bronze - 30 pcs. per ctn. Aluminum - 50 pcs. per ctn. Galvanized Malleable Iron - 30 pcs. per ctn.

Code Price Code Price Code Price

SGBR95 SGAL95 SGML95

A larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate. This assembly isavailable in three material selections with 1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snows!

Loop the Loop Snow Guards for Asphalt Shingle, Slate and Cedar ShakeRoofs - 300 pcs. per ctn.

Copper

Code Price

SGLLC1

Soldering

Nailing

Retro Hook

No. 2 Snow Guard Assembly for Slate Roofs - 50 pcs. per ctn.A durable, plated iron casting and bar assembly designed for slate roofs. The riveted steel bar is 1/8" x 1" x 12" long and goes 8" underthe slate and between the slate course. It is normally installed with the slate roof application. Also suited for wood shake, tile andmineral surfaced shingles. Use neoprene washer screws to fasten. All roof penetrations should be sealed with adhesive sealant (SB-190).

Bronze Galvanized Malleable Iron

Code Price Code Price

SGBR-2 SGML-2

The Loop the Loop snow guard is an economy guard for wood deck applications under slate, wood shakes or asphalt shingles.Recommended snow guards per square: 1/4 pitch roof - 50 snow guards, 1/3 pitch roof - 75 snow guards, 1/2 pitch roof - 150 snowguards. Loop the Loop snow guard does not follow the typical layout pattern as seen on page 13. This style snow guard requires totalroof coverage. Please call Berger at (800) 523-8852 for more information.

Mullane BRONZE GUARD™ Model #200 Series- 50 pcs. per ctn.This spike style snow guard is fabricated from the same sheet metal components as the #100, but the #200 casting is 30% largerthan the #100. Both products are equally strong and effective in their capacity to hold snow on the roof, but the Model #200S is moreappropriate to larger scale buildings, or where the roof material is thicker than usual, such as tile roofing.

Bronze Lead Coated Copper

Code Price Code Price

200CPSM 200LCPSM

#200 Series for Soldering

Bronze for Slate Applications Lead Coated for Slate Applications Bronze for Asphalt Shingle Applications

Code Price Code Price Code Price

200S-NA 200SLC-NA 200S-AS

#200 Series for Nailing on New Installations (Slate or Shingles)

Bronze Lead Coated Copper

Code Price

200CPT 200LCPT

#200 Series with Hook for New Installations (Tile Roofs)

Soldering

Nailing

Retro Hook

SNOW

RET

ENTI

ON S

YSTE

MSSNOW RETENTION SYSTEMS

Page 91/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Tile Roofs

Bronze Lead Coated Copper

Code Price Code Price

200S-RH 200SLC-RH

#200 Series with Retro-Hook for Existing Slate Roofs

Mullane BRONZE GUARD™ Model #300 Series- 50 pcs. per ctn.A solid bronze pad style snow guard for all steep roof applications. The half round Model #300 casting is attached to a 24 oz. copperinstallation base flange by four solid copper rivets for extreme durability and snow load bearing capacity. The solid bronze castingeliminates the corrosion problem caused by condensation which is formed inside of closed, pressed copper snow guards. Theinstallation flange can be easily fabricated to any length for any roof application, and is also available with our Retro-Hook.

Bronze Lead Coated Copper

Code Price Code Price

300CPSM 300LCPSM

#300 Series for Soldering

Bronze for Slate Applications Lead Coated for Slate Applications Bronze for Asphalt Shingle Applications

Code Price Code Price Code Price

300S-NA 300SLC-NA 300S-AS

#300 Series for Nailing on New Installations (Slate or Shingles)

Bronze Lead Coated Copper

Code Price Code Price

300S-RH 300SLC-RH

#300 Series with Retro-Hook for Existing Slate Roofs

Soldering

Nailing

Retro Hook

Compressible Hook for Retro Fit

Compressible Hook for Retro Fit

New Installations Only.Hook does not Compress.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

SNOW RETENTION SYSTEMS

Page 101/07

SNOW RETENTION SYSTEM

S

Mullane BRONZE GUARD™ Model #400 Series- 50 pcs. per ctn.This "Classic" BRONZE GUARD™ series features large (approximately 4” x 4”) decorative bronze castings in Eagle, Oak Leaf, or Fleur-De-Lis designs. The castings are mounted on solid 1" x 1/8" copper bar stock with solid brass bolts. The installation bar is predrilledfor easy installation. While they are decorative elements, they are also extremely durable and are capable of holding extreme loads.They are typically installed in two rows along the eaves with subsequent rows of low profile guards to supplement the necessarysnow holding design load.

Bronze Bronze Patina

Code Price Code Price

400EGLBRZ 400EGLPAT

#400 Series, Eagle Design

Bronze Bronze Patina

Code Price Code Price

400LEAFBRZ 400LEAFPAT

#400 Series, Oak Leaf Design

#400 Series, Fleur-de-Lis Design

Eagle Design

Oak Leaf Design

Fleur-de-Lis Design

Bronze Bronze Patina

Code Price Code Price

400FDLBRZ 400FDLPAT

Mullane SNOW BOSS™ Model #630 for Metal Roofs - 50 pcs. per ctn.SNOW BOSS #630 are solid cast aluminum snow guards and are best used for curtain wall systems, window wells or cornice shelves.Typical installation is by means of high strength adhesives (SB-190) that develop superior peel and shear bonding strength on modernmetal roofs coated with plastic resin paints such as Kynar®. These aluminum guards are available mill finished or custom color matchedusing Dupont® Imron enamels. Adhesive failure does not constitute Berger product defect and is not the responsibility of Berger.

Mill Finished Cast Aluminum Painted Cast Aluminum

Code Price Code Price

630M 630C

Mullane SNOW BOSS™ Model #640 for Metal Roofs - 50 pcs. per ctn.SNOW BOSS #640 are "traditional shaped", solid cast aluminum snow guards for the mid-panel application on all standing, batten,and flat seam (non-copper) metal roofs. Typical installation is by means of high strength adhesives (SB-190) that develop superiorpeel and shear bonding strength on modern metal roofs coated with plastic resin paints such as Kynar®. These aluminum guards areavailable mill finished or custom color matched using Dupont® Imron enamels. Adhesive failure does not constitute Berger productdefect and is not the responsibility of Berger.

Mill Finished Cast Aluminum Painted Cast Aluminum

Code Price Code Price

640M 640C

SNOW RETENTION SYSTEMS

Page 111/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

SNOW

RET

ENTI

ON S

YSTE

MS

Mullane SNOW BOSS™ Model #650 for Metal Roofs - 50 pcs. per ctn.SNOW BOSS #650 Series is constructed with durable UV resistant polycarbonate and is compatible with all non-copper metal roofsystems. The Model #650 includes a new patent pending base design, which is the latest technological advance in adhesive mounted(SB-190) snow guard systems. This cross hatch design strengthens adhesive grip by increasing surface area and texture, andprovides for faster solvent escape, and adhesive curing. The series of evenly spaced holes in the base allow the solvents to dissipatequickly, and become “glue rivets” when the adhesive keys in the holes for a more secure application. Adhesive failure does notconstitute Berger product defect and is not the responsibility of Berger.

Clear Polycarbonate

Code Price

650C

Mullane SNOW BOSS™ Model #690 for Metal Roofs - 50 pcs. per ctn.SNOW BOSS #690 are a decorative, spoked, half-round designed solid cast aluminum snow guards. They are well suited for the mid-panel application on all standing, batten, and flat seam (non-copper) metal roofs. Typical installation is by means of high strengthadhesives (SB-190) that develop superior peel and shear bonding strength on modern metal roofs coated with plastic resin paintssuch as Kynar®. These aluminum guards are available mill finished or custom color matched using Dupont® Imron enamels. Adhesivefailure does not constitute Berger product defect and is not the responsibility of Berger.

Mill Finished Cast Aluminum Painted Cast Aluminum

Code Price Code Price

690M 690C

Mullane Model #500 Bronze Guard™ Snow Fence Bracket (for 3 Pipes)The Model #500 Snow Fence Bracket is cast from solid bronze for lifetime durability. The castings have been carefully engineered toassure maximum strength at the points of greatest stress when under load. Double back brace brackets are standard, and giveredundant protection against casting failure when under load. Holes for rails are 1.125” to accommodate 1.05” (od) brass pipe. Thebrackets are available in three angles: 90, 67.5, and 45 degrees. The base plate is 1/8" 220 bronze. The Model #500 is typicallyinstalled along the perimeter of slate roofs with rafters up to 25 ft. in areas with moderate to high snow falls. The Model #500 is acustom order and the base plate can be fabricated to any specified size. 3/4" Red Brass Pipe, Couplings and End Caps sold separately.Please call Berger at (800) 523-8852 for more information.

Bronze Bracket & Plate

Code Price

500BBA

Mullane Fitrite #121 Protector Snow Fence Bracket (for 2 Pipes)The Model #121 Snow Fence Bracket is cast in galvanized malleable iron for durability. The castings are mounted on an 11 gaugegalvanized steel plate. The brackets accommodate two .080” (od) galvanized pipes. The Fitrite #121 is typically installed on slate roofswith rafters not over 18 ft. in areas with moderate snow falls. The Fitrite #121 is a custom order and the base plate can be fabricatedto any specified size. 1/2" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for moreinformation.

Galv. Malleable Iron Bracket & Steel Plate

Code Price

FR121ML

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

SNOW RETENTION SYSTEMS

Page 121/07

SNOW RETENTION SYSTEM

S

Mullane Fitrite #124 Mini Protector Snow Fence Bracket (for 2 Pipes)The Fitrite #124 Mini Protector Snow Fence Bracket is cast in malleable iron for durability. The castings are mounted on a solidgalvanized steel plate, 2" x 12", with pre drilled holes for easy installation. The bracket assembly is set up to accommodate two 1/2”galvanized pipes. Brackets are adjustable to the roof pitch. The Model #124 should be used only where low to moderate snowloadsare anticipated and can be mounted to most any roof surface. The Fitrite #124 is availble in cast bronze or galvanized malleable iron.1/2" Red Brass Pipe or 1/2" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for moreinformation.

Cast Bronze Galvanized Malleable Iron

Code Price Code Price

FR124BRZ FR124ML

Mullane Fitrite #131 Snow Fence Bracket (for 3 Pipes)The Model #131 Snow Fence Bracket is cast from malleable iron and zinc plated for durability. The castings have been carefullyengineered to assure maximum strength at the points of the greatest stress when under load. The Model #131 accommodates 3galvanized iron, bronze, brass or stainless steel pipes. It is for use on large slate and shingle roofs with rafters up to 25 ft. long. Thebrackets are adjustable to various roof pitches. The base plate is 11 gauge galvanized steel, sized to the slate dimension, andpredrilled and countersunk for fasteners. Bolts are Grade 5 zinc plated steel. The Fitrite #131 is a custom order and the base plate canbe fabricated to any specified size. 3/4" Galvanized Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information.

Malleable Iron Bracket & Galv. Steel Plate

Code Price

FR131ML

Mullane Fitrite #132 Snow Fence Bracket (for 3 Pipes)The Model #132 Snow Fence Bracket is cast from solid bronze for durability. The castings have been carefully engineered to assuremaximum strength at the points of the greatest stress when under load. The Model #132 accommodates 3 brass, bronze or stainlesssteel pipes. It is for use on small slate roofs with rafters up to 18 ft. long. The brackets are adjustable to various roof pitches. Thebase plate is 1/8" commercial bronze or brass plate, sized to the slate dimension, and predrilled and countersunk for fasteners. Boltsare solid brass. The Fitrite #132 is a custom order and the base plate can be fabricated to any specified size. 3/4" Red Brass Pipe,Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information.

Bronze Bracket & Brass Plate

Code Price

FR132BR

Mullane Fitrite #122 Protector Snow Fence Bracket (for 2 Pipes)The Model #122 Snow Fence Bracket is cast in bronze for durability. The castings are mounted on an 11 gauge galvanized steel plate.The brackets accommodate two .080” (od) brass pipes. The Fitrite #121 is typically installed on slate roofs with rafters not over 18 ft.in areas with moderate snow falls. The Fitrite #122 is a custom order and the base plate can be fabricated to any specified size. 1/2"Red Brass Pipe, Couplings and End Caps sold separately. Please call Berger at (800) 523-8852 for more information.

Bronze Bracket & Brass Plate

Code Price

FR122ML

Mullane Fitrite Fence Bracket for Tile Roofs:Available for Spanish or Ludowici, Roman, Provincial, Designer & MissionTiles. Please call for additional information and pricing.

Page 131/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

SNOW

RET

ENTI

ON S

YSTE

MS

SNOW GUARDTECHNICAL INFORMATION

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

6 to 8 ft.between groups

2nd group same as 1stgroup with spacing pattern

reversed as shown

RIDGE (Top of Roof)

EAVE (Bottom of Roof)

Start 1st row at orabove exterior

load bearing wall

2nd row stagger 15 in.over central to 1st row,

and 15 in. up roof or 2 rowsof shingles above 1st row

3rd row is same as 1st row.Up 15 in. or

2 rows of shingles

X X X X X X X X X X X X X X

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

X X X X X X X X X X X X X X X

Snow Guard Pattern Requirements Typical For Shingled RoofingBerger will provide a custom snow guard pattern recommendation. Please contact us at 800-523-8852 for your custom layout.Snow guard patterns provided by Berger are only recommendations. Actual snow guard patterns should be approved by a licensed architect.

2nd group should beapprox. 6 to 8ft.

from 1st group; additionalgroups may be neededdepending on overall

length of run.

6 to 8 ft.between groups

Positioning of Berger snow guards required for effective use: 1 every 40 inches over entire roof, or 2 groups of 3 staggered rows on 30 inch centers with 1group at the eave and 1 group midway on roof slope. On long slopes, multiple groups with 6 ft. space separation maximum. Snow guards should never beplaced beyond the bearing wall on an extended roof section. This can result in ice damming and cause structural damage.

Berger Building Products, Inc (BBPI) warrants that the products it manufactures shall be free from material defects. Should any of the products provedefective, the obligation of BBPI under this warranty shall be limited to replacement of the defective product or at our option the cost of the product originallyshipped by Berger. This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for aparticular purpose. There are no warranties, which extend beyond the description on the face hereof. BBPI in no event, whether claim is based on warranties,contract negligence or otherwise, is liable for incidental or consequential damages.

Berger Building Products, Inc (BBPI) will not be responsible for misapplication or modification of product, incorrect material or defects that were obvious attime of installation. Any consequential damage, schedule delays, additional labor, and or equipment rental costs will not be BBPI responsibility. Any BBPI productwarranty claim is limited solely to Berger Building Products, Inc.

Snow Guard GuidelinesDETERMINING THE PROPER AMOUNT OF TORQUE FOR SET SCREWS will vary depending on the type and gauge of metal roofing. The recommended

method for determining proper torque is to install one unit first, with blade on the uphill side. After tightening the set screws, loosen and remove the unit,inspecting the indentations created in the seam to see that proper compression was obtained. Remember, the screw closest to the blade is the real workhorse asit derives its strength from the blade, and if extra torque is needed, apply it to this screw.

WHEN MECHANICALLY FASTENING SNOW GUARDS, use sealant or neoprene washers to ensure watertight seals. It is imperative to secure these productsto a structural membrane rafter or purlin at least 1.5 inches deep.

Berger Building Products, Inc (BBPI) snow guards are devices that are attached to the roof structure in order to provide uniform retention and control thesnow from avalanching in large sheets. The snow guards need to be applied in sufficient quantity according to a prescribed pattern in order to be effective. SnowGuards are intended to reduce snow movement and provide for a controlled melt and breakdown of the snow mass into smaller sections. Snow guard placementwill vary from region to region and will be influenced by roof pitch, the lengths of roof runs and roof features. Local installation customs may not be the bestguide for placement. Additional information can be found in Sheet Metal and Air Conditioning Contractors' National Association (SMACNA) architectural sheetmetal manual. Ultimately a qualified professional should determine placement.

Pro-Master Roof Shield UDL™ - Synthetic Roofing Underlayment• UV Stabilized Synthetic Material Rated for One Year Exposure.• Lightweight: 11.2 lbs. for 4 Sq. Roll, 28 lbs. for 10 Sq. Roll.• Printed with Nail Pattern and Alignment Guides.• Anti-Slip Coated for Safety.• 52" Width Makes Installation Quicker.• Resists Mold and is Stronger & Lighter than Organic Underlayment.• 25 Year Limited Warranty.• May be Used with: Asphalt Shingles, Wood Shakes, Non-Structural Metal Roofing, and Synthetic & Quarry Slate• Florida Building Code Approved for Use in HVHZ (High Velocity Hurricane Zone) as per TAS 104

Woven Black Polypropylene with Polymer

Roll Size Size Pallet Size Code Price

4 Square Roll 52" x 92.3' 100 Rolls PMUDL4

10 Square Roll 52" x 231' 49 Rolls PMUDL10

Page 141/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

SYNTHETICROOFING UNDERLAYMENT

FBC: #FL4855

SYNTHETIC ROOFING UNDERLAYMENT

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

EURACRAFTGUTTER SYSTEM™

Page 151/07

GUTT

ERHalf Round Gutter - 5 pcs per ctn.9.84' Long 18.04' Long 18.04' Long

20 Oz. Copper 18 Oz. Copper 20 Oz. Copper

Size Code Price Size Code Price Size Code Price

5" L10E2C5 5" L18EC5 5" L18E2C5

7.56" L10E2C75 6" L18EC6 6" L18E2C6

7.56" L188EC75 7.56" L18E2C75

Smooth Round Welded Downspout - 5 pcs per ctn.9.84' Long 9.84' Long

18 Oz. Copper 20 Oz. Copper

Size Code Price Size Code Price

3" PRPEC3 4" PRPE2C4

4" PRPEC4

4.7" PRPE8C47

Smooth Elbow

18 Oz. Copper

Size Pcs. per ctn. Code Price

3" 25 PR__EC3

4" 25 PR__EC4

4.7" 15 PR__EC47

• Elbow Angles Available in 40 Degrees (1) and 72 Degrees (3).

ENTER ANGLE CODE WHEN ORDERING

Page 161/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

EURACRAFTGUTTER SYSTEM™

Quarter Ball End Cap18 Oz. Copper

Size Pieces per Carton Code Price

5" 50 CENBALL5

6" 50 CENBALL6

7.56" 25 CENBALL75

End Cap18 Oz. Copper

Size Pieces per Carton Code Price

LEFT

5" 50 CENLHEC5

6" 50 CENLHEC6

7.56" 25 CENLHEC75

RIGHT

5" 50 CENRHEC5

6" 50 CENRHEC6

7.56" 25 CENRHEC75

GUTTER

Fascia Hanger with Spring Tab18 Oz. Copper

Size Pieces per Carton Code Price

5" 50 GFBHGREC5

6" 50 GFBHGREC6

7.56" 10 GFBHGREC75

J Roof Hanger with Spring Tab18 Oz. Copper

Size Pieces per Carton Code Price

5" 10 GRFHGREC5

6" 10 GRFHGREC6

7.56" 10 GRFHGREC75

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

EURACRAFTGUTTER SYSTEM™

Page 171/07

GUTT

EREnd Cap with 2' Gutter18 Oz. Copper

Size Pieces per Carton Code Price

QUARTER BALL END CAP

5" - left ball 1 EP5BLHEC

6" - left ball 1 EP6BLHEC

7.56"- left ball 1 EP756BLHEC

5" - right ball 1 EP5BRHEC

6" - right ball 1 EP6BRHEC

7.56"- right ball 1 EP756BRHEC

STANDARD END CAP

5" - left 1 EP5LHEC

6" - left 1 EP6LHEC

7.56"- left 1 EP756LHEC

5" - right 1 EP5RHEC

6" - right 1 EP6RHEC

7.56"- right 1 EP756RHEC

Miters - Seamless18 Oz. Copper

Size Pieces per Carton Code Price

OUTSIDE

5" 5 LOSSMEC5

6" 5 LOSSMEC6

7.56" 5 LOSSMEC75

INSIDE

5" 5 LISSMEC5

6" 5 LISSMEC6

7.56" 5 LISSMEC75

Swan Neck Offset18 Oz. Copper

Size Pieces per Carton Code Price

3" 25 PROF23EC3

4" 25 PROF23EC4

4.7" 10 PROF23EC47

Page 181/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

EURACRAFTGUTTER SYSTEM™

GUTTER

Downspout Reducer18 Oz. Copper

Size Pieces per Carton Code Price

100mm to 76mm Dia. 1 REDUC10076

Plug In Outlet (no solder required)18 Oz. Copper

Size Pieces per Carton Code Price

5" x 3" 25 PINOUT53

6" x 4" 25 PINOUT64

7.56" x 4" 25 PINOUT754

7.56" x 4.7" 25 PINOUT7547

Gutter Outlet (solder type)18 Oz. Copper

Size Pieces per Carton Code Price

3" 50 RBOCP3

4" 50 RBOCP4

4.7" 50 RBOEC47

Downspout Connector18 Oz. Copper

Size Pieces per Carton Code Price

3" 50 DSCONNEC3

4" 50 DSCONNEC4

4.7" 50 DSCONNEC47

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

EURACRAFTGUTTER SYSTEM™

Page 191/07

GUTT

ERRainwater Pipe Cleanout18 Oz. Copper

Size Pieces per Carton Code Price

3" 20 CLNOUT3

4" 12 CLNOUT4

Downspout Bracket with Brass Spike18 Oz. Copper

Size Pieces per Carton Code Price

3" 25 DSHNGBSPK3

4" 25 DSHNGBSPK4

Downspout Bracket with M10 x 3.54" Long Screw THD18 Oz. Copper

Size Pieces per Carton Code Price

3" 50 DSHNGBSCR3

4" 50 DSHNGBSCR4

4.7" 50 DSHNGBSCR47

Pipe Clamp Cover18 Oz. Copper

Size Pieces per Carton Code Price

76mm 10 CLPCVR76

100mm 10 CLPCVR100

Premium Gutter Connector with Rubber Seals18 Oz. Copper

Size Pieces per Carton Code Price

5" 10 GSPRCONEC5

6" 10 GSPRCONEC6

Standard Gutter Connector with Rubber Seals18 Oz. Copper

Size Pieces per Carton Code Price

5" 10 GUCONEC5

6" 10 GUCONEC6

Page 201/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

EURACRAFTGUTTER SYSTEM™

GUTTER

Downspout Strainer18 Oz. Copper

Size Pieces per Carton Code Price

3" 10 DSSTRNEC3

4" 10 DSSTRNEC4

4.7" 10 DSSTRNEC47

Leaf Guard with Fixing Bracket18 Oz. Copper

Size Pieces per Carton Code Price

5" and 6" 5 LEAFGDEC5-6

7.56" 5 LEAFGDEC756

Hanger Bending ToolSize Pieces per Carton Code Price

1 HGRBEND

Downpipe ExpanderSize Pieces per Carton Code Price

3" 1 EXPANTOOL3

4" 1 EXPANTOOL4

4.7" 1 EXPANTOOL47

K Style Gutter 5" 10' K10__ __5

K Style Gutter 5" 20' K20__ __5

K Style Gutter 6" 10' K10__ __6

K Style Gutter 6" 20' K20__ __6

Gutter Coil for 5"K 11 3/4" 200' per roll 1134__ __

Gutter Coil for 6"K 15" 200' per roll 15-C__ __

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ENTER STYLE CODE WHEN ORDERING:Available in Caesar Circle (CZ), Greek Key (GK) and Patriot (PT)

“K” STYLE EMBOSSED GUTTER & GUTTER COIL

Metal: 16 OZ. COPPERPRODUCT SIZE LENGTH Code Price

EMBOSSED GUTTER & COIL

Page 211/07

Caesar Circles Greek Key Patriot

HALF ROUND EMBOSSED GUTTER & GUTTER COIL

Caesar Circles Greek Key Patriot

Half Round Gutter 5"SB 10' L10__ __5

Half Round Gutter 5"SB 20' L20__ __5

Half Round Gutter 6"SB 10' L10__ __6

Half Round Gutter 6"SB 20' L20__ __6

Gutter Coil for 5"HR 10" 200' per roll 10-C__ __

Gutter Coil for 6"HR 11 5/8" 200' per roll 1158__ __

ENTER STYLE CODE WHEN ORDERING:Available in Caesar Circle (CZ), Greek Key (GK) and Patriot (PT)

Metal: 16 OZ. COPPERPRODUCT SIZE LENGTH Code Price

U. S. Patent 6,314,685 and Patent Pending

Please Call for Lead Times and Delivery on All Embossed Gutter.

GUTT

ER

4"K 10' N/A N/A N/A • N/A N/A • N/A N/A

20' N/A N/A N/A • • N/A • N/A N/A

5"K 10' • • • .024 • • • • • •16' • • • .024 • • • • • •20' • • • .024 • • • • • •21' • • • .024 • • • • • •26' • • • .024 • • • • • •30' • • • .024 • • • • • •32' • • • .024 • • • • • •

6"K 10' N/A • • .032 • • • • • •16' N/A • • .032 • • • • • •20' N/A • • .032 • • • • • •21' N/A • • .032 • • • • • •30' N/A • • .032 • • • • • •32' N/A • • .032 • • • • • •

7"K 10' N/A • N/A • N/A N/A • N/A N/A

8"K 10' N/A • N/A • N/A N/A • N/A N/A

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

.027 PAINTED ALUMINUM COLORS AVAILABLE: �High Gloss White �Satin White �Royal Brown �Black �Clay (.024 Only)

.032 PAINTED ALUMINUM COLORS AVAILABLE: �High Gloss White �Royal Brown �Dark Bronze (6K Only)26 GAUGE PAINTED GALVANIZED STEEL COLORS AVAILABLE: �White �Brown7"K and 8"K are Available in Longer Lengths with Extended Lead Times.

PACKAGING:ALUMINUM: 10' to 21' = 10 pcs. per ctn. 22'+ and 6"K = 5 pcs. per ctn.COPPER: 5"K: 10' to 21' = 5 pcs. per ctn. 5"K: 22'+ = 4 pcs. per ctn. 6"K: 10' to 17' = 5 pcs. per ctn. 6"K: 18'+ = 4 pcs. per ctn.

SIZE LENGTH ALUMINUM COPPER GALV. STEEL P-STEEL P-GRIP

A B C D E F G

4K 3 1/8" 2 3/4" 2 7/8" 9/16" 4" 7/16" 1/2"

5K 3 5/8" 3 3/8" 3 5/8" 9/16" 5" 9/16" 1/2"

6K 4 7/8" 3 7/8" 4 5/8" 1" 6" 5/8" 9/16"

7K 5 7/8" 4 9/16" 6" 1" 7" 5/8" 5/8"

8K 7 1/4" 5 3/8" 7" 1" 8" 5/8" 5/8"

SIZELOC.

Dimensions for Standard Gutter Sizes

• AVAILABLE LENGTHS

Aluminum K Style Gutter is Hemback StyleCopper, Galvanized and Painted Steel are Straight Back Style

All K Style Gutter is Roll-Formed

Painted Painted PaintedAluminum Aluminum Mill Gal. Steel Paintgrip

0.027 0.032 Finished 16 ounce 20 ounce 24 gauge 26 gauge 26 gauge 26 gauge

“K” STYLE GUTTER

Page 221/07

GUTTER

Standard Product May Vary from SMACNA Guidelines. Use Berger Hangers to Avoid Possible Oil Canning on Face of Gutter.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

.032 PAINTED ALUMINUM COLORS AVAILABLE:�High Gloss White �Royal Brown �Dark Bronze

A B C D E F G H

5K 3 5/8" 3 3/8" 3 5/8" 9/16" 5" 9/16" 1/2" 3"

6K 4 7/8" 3 7/8" 4 5/8" 1" 6" 5/8" 9/16" 2 9/16"

SIZELOC.

Dimensions for Hi-Back Gutter Sizes

“K” STYLE 90 DEGREE APRON GUTTER

“K” STYLE HI-BACK GUTTER

SIZE LENGTH ALUMINUM COPPER GALV.

5" K 10' • • • •5" K 20' • • • •6" K 10' • • • •6" K 20' • • • •

Painted MillAluminum Finished

0.032 0.032 16 ounce 26 gauge

.032 PAINTED ALUMINUM COLORS AVAILABLE: �High Gloss White �Royal Brown�Dark Bronze

26 GAUGE PAINTED GALVANIZED STEEL COLORS AVAILABLE: �White �Brown

SIZE LENGTH ALUMINUM COPPER GALV. P-STEEL

5" K 10' • • • • •6" K 10' • • • • •5" K 20' • • • • •6" K 20' • • • • •5" K 30' • • • • •6" K 30' • • • • •

PaintedAluminum Mill

0.032 Finished 16 ounce 26 gauge 26 gauge

• AVAILABLE LENGTHS

“K” STYLE APRON GUTTER

Page 231/07

GUTT

ER

.027 and .032 PAINTED ALUMINUM COLORS AVAILABLE: �High Gloss White �Royal Brown20 Oz. Copper 7"SB and 8"SB are Available with Extended Lead Times. Manufactured Without Break Lines.

SIZE LENGTH ALUMINUM COPPER GALV. STEEL P-GRIP

4"SB 10' N/A N/A N/A • • • • •20' N/A N/A N/A • • • • •

5"SB 10' • • • .024 • • • • •20' • • • .024 • • • • •25' • • • .024 • • • • •30' • • • .024 • • • • •

6"SB 10' N/A • • .032 • • • • •20' N/A • • .032 • • • • •25' N/A • • .032 • • • • •30' N/A • • .032 • • • • •

7"SB 10' N/A • • • • • • •8"SB 10' N/A • • • • • • •

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

A B C Girth

4SB 2" 1/2" 4" 8 1/2"

5SB 2 1/2" 1/2" 5" 10"

6SB 3" 9/16" 6" 11 1/2"

7SB 3 1/2" 5/8" 7" 13 1/8"

8SB 4" 5/8" 8" 15"

SIZELOC.

Dimensions for Standard Gutter Sizes

Painted PaintedAluminum Aluminum Mill Paintgrip

0.027 0.032 Finished 16 ounce 20 ounce 24 gauge 26 gauge 26 gauge

• AVAILABLE LENGTHS

HALF ROUND GUTTER

Page 241/07

DOUBLE BEAD HALF ROUND GUTTER &SINGLE BEAD HALF ROUND GUTTER WITH 1" FLANGE

5" DB 10' • • •6" DB 10' • • •5" DB 20' • • •6" DB 20' • • •

5" SB w/1" FL 10' • • •6" SB w/1" FL 10' • • •

Copper Galv. Steel Paintgrip16 ounce 26 gauge 26 gaugeSIZE LENGTH

PACKAGING FOR DOUBLE BEAD HALF ROUND GUTTER: ALUMINUM: 10' to 26' = 10 pcs. per ctn. 27'+ = 5 pcs. per ctn.COPPER: 5"HR: 10' to 25' = 5 pcs. per ctn. 5"HR: 26'+ = 4 pcs. per ctn. 6"HR: 10' to 21' = 5 pcs. per ctn. 6"HR: 22'+ = 4 pcs. per ctn.PACKAGING FOR SINGLE BEAD HALF ROUND GUTTER WITH 1" FLANGE: COPPER: 5 pcs. per ctn.

GUTTER

DOUBLE BEADThis Gutter Requires Berger

Regal Double Bead Bar HangerListed on Page 35.

SINGLE BEADWITH 1" FLANGE

This Gutter Requires BergerRegal Single Bead FlangeGutter Roof Strap Hanger

Listed on Page 36.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ROUND DOWNSPOUTS

Page 251/07

Plain Round Downspout -3" & 4" Alum. - 100'/ctn. 3", 4" & 5" Copper - 50'/ctn. Galv. Steel - No Box5" & 6" MF Alum. - 50'/ctn. 6" Copper - 30'/ctn.ALUMINUM:• Standard 3" (.019" thickness) and Standard 4" (.024" thickness) Aluminum is Available in Mill Finished and also in High Gloss

White (HG), Royal Brown (BR) and Dark Bronze (DB).• Standard 5" & 6" (.024" thickness) is Available in Mill Finished Only.COPPER:• 3", 4", 5" & 6" Available in 16 Ounce. 3", 4", 5" Also Available in 20 Ounce.GALVANIZED STEEL:• 2" Galvanized Steel is Available in 26 Gauge Only.• 3" & 4" Galvanized Steel is Available in 24 Gauge (24), 26 Gauge (26), 28 Gauge (28) and 30 Gauge (SG).• 5" & 6" Galvanized Steel is Available in 24 Gauge (24) and 26 Gauge (26).PAINTGRIP:• 3", 4", 5" & 6" Paintgrip is Available in 26 Gauge Only.

ENTER COLOR/GAUGE CODE WHEN ORDERING

Metal: Painted Aluminum Mill Finished Alum. 16 Oz. Copper Galvanized Steel Paintgrip

Size Code Price Code Price Code Price Code Price Code Price

2" N/A N/A PRPCP2 PRP262 N/A

3" PRP__ __3 PRPMF3 PRPCP3 PRP__ __3 PRPPG3

4" PRP__ __4 PRPMF4 PRPCP4 PRP__ __4 PRPPG4

5" N/A PRPMF5 PRPCP5 PRP__ __5 PRPPG5

6" N/A PRPMF6 PRPCP6 PRP__ __6 PRPPG6

Round Corrugated Downspout -3" & 4" Alum. - 100'/ctn. 3", 4" & 5" Copper - 50'/ctn. Galv. Steel - No Box5" & 6" MF Alum. - 50'/ctn. 6" Copper - 30'/ctn.ALUMINUM:• Standard 3" (.019" thickness) and Standard 4" (.024" thickness) Aluminum is Available in Mill Finished and also in High Gloss

White (HG), Royal Brown (BR) and Dark Bronze (DB).• Standard 5" & 6" (.024" thickness) is Available in Mill Finished Only.COPPER:• 3", 4", 5" & 6" Available in 16 Ounce. 3", 4", 5" Also Available in 20 Ounce.GALVANIZED STEEL:• 2" Galvanized Steel is Available in 26 Gauge Only.• 3" & 4" Galvanized Steel is Available in 24 Gauge (24), 26 Gauge (26), 28 Gauge (28) and 30 Gauge (SG).• 5" & 6" Galvanized Steel is Available in 24 Gauge (24) and 26 Gauge (26).PAINTGRIP:• 3", 4" & 5" Paintgrip is Available in 26 Gauge Only.

ENTER COLOR/GAUGE CODE WHEN ORDERING

Metal: Painted Aluminum Mill Finished Alum. 16 Oz. Copper Galvanized Steel Paintgrip

Size Code Price Code Price Code Price Code Price Code Price

2" N/A N/A N/A RCP262 N/A

3" RCP__ __3 RCPMF3 RCPCP3 RCP__ __3 RCPPG3

4" RCP__ __4 RCPMF4 RCPCP4 RCP__ __4 RCPPG4

5" N/A RCPMF5 RCPCP5 RCP__ __5 RCPPG5

6" N/A RCPMF6 RCPCP6 RCP__ __6 N/A

DOW

NSPO

UTS

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Plain Square Downspout - 50'/ctn.• Painted Aluminum is Available in High Gloss White (W), Royal Brown (B) and Dark Bronze (Z).• Painted Galvanized Steel is Available in White (WS) and Brown (BS).

ENTER COLOR CODE WHEN ORDERING

Square Corrugated Downspout -Alum. & MF Alum. - 100'/ctn. Copper - 50'/ctn. Galv. Steel - No BoxPainted Galv. Steel - 50'/ctn.

• Painted Aluminum is Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Clay (CL).• Painted Aluminum 2" x 3" is Also Available in Satin White (SW), Black (BK) and Ivory (IA).• 2" x 2" Galvanized Steel is Available in 26 Gauge Only.• 2" x 3", 3" x 4" and 4" x 5" Galvanized Steel are Available in 24 Gauge (24), 26 Gauge (26) and 28 Gauge (28).• Painted Galvanized Steel is Available in White (WS) and Brown (BS).• 2" x 3" Painted Aluminum is .019 Standard, .016 Economy (White Only) and .024 Commercial (White Only).• 3" x 4" Painted Aluminum is Available in .019 and .024.• 4" x 5" Painted Aluminum is .024 Standard.• 2" x 3" Mill Finished Aluminum is .019 Standard.• 3" x 4" and 4" x 5" Mill Finished Aluminum is .024 Standard.• Stainless Steel and 20 Oz. Copper are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks.

Special Orders are Not Subject to Cancellation or Return.• 2" x 3" and 3" x 4" Square Corrugated Downspout is Now Available in Custom Lengths Please Call for Lead Times and Any

Minimum Order Requirements that may Apply.• Requesting Longer Lengths of Downspouts may Increase the Possibility for Pipe to Exceed the Normal Material Tolerances and

may Lead to Potential Mounting Problems.

ENTER COLOR/GAUGE CODE WHEN ORDERING

Metal: .032 Painted Alum. .032 Mill Fin. Alum. 16 Oz. Copper 26 Ga. Galv. Steel Paintgrip Painted Galv. Steel

Size Code Price Code Price Code Price Code Price Code Price Code Price

2" x 3" N/A N/A PSCP23 N/A N/A N/A

3" x 4" PS3__34 PS3MF3 PSCP34 PSGL34 PSPG34 PS__ __34

4" x 5" PS3__45 PS3MF4 PSCP45 PSGL45 PSPG45 PS__ __45

5" x 6" PS3__56 PS3MF5 PSCP56 PSGL56 PSPS56 PS__ __56

SQUARE DOWNSPOUTS

Page 261/07

Metal: Painted Aluminum .032 Mill Fin. Alum. 16 Oz. Copper 26 Ga. Galv. Steel Paintgrip Painted Galv. Steel

Size Code Price Code Price Code Price Code Price Code Price Code Price

2" x 2" N/A N/A SCPCP2 SCP262 N/A N/A

2" x 3" Call for Code SCPMF3 SCPCP3 SCP__ __3 SCPPG3 SCP__ __3

3" x 4" Call for Code SCPMF4 SCPCP4 SCP__ __4 SCPPG4 SCP__ __4

4" x 5" SCP__ __5 SCPMF5 SCPCP5 SCP__ __5 SCPPG5 SCP__ __5

DOWNSPOUTS

Plain Round and Round Corrugated Elbows -3" & 4" Alum. - 30 pcs./ctn. 3" & 4" Galv. - 20 pcs./ctn.5" & 6" Alum. & Galv. - 10 pcs./ctn. Copper Elbows - 10 pcs./ctn. All 2" - 20 pcs./ctn.• Elbow Angles Available in 90 Degrees (4), STANDARD 75 Degrees (3), 60 Degrees (2), 45 Degrees (1) and 30 Degrees (0).• Elbow Angles Specified other than the Standard 75 Degrees (3) are Considered a Special Order and may Require an Extended Lead

Time. Special Orders are Not Subject to Cancellation or Return.• 3" & 4" Aluminum Elbows are Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF).• 5" & 6" Aluminum Elbows are Available in Mill Finished Only.• 3" Aluminum Elbows are .019 Standard Gauge.• 4" & 5" Aluminum Elbows are .024 Standard Gauge.• All Lap Joined Elbows Must be Soldered or Sealed Prior to Installation.

ENTER COLOR/METAL/ANGLE CODE WHEN ORDERING

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ROUND ELBOWS

Page 271/07

Metal: Aluminum 16 Oz. Copper 26 Gauge Galvanized Steel Paintgrip

Size Code Price Code Price Code Price

PLAIN ROUND

2" N/A PR3CP2 PR63P2 N/A

3" PR3 __ __3 PR3CP3 PR63P3 PR63G3

4" PR3 __ __4 PR3CP4 PR63P4 PR63G4

5" PR3MF5 PR3CP5 PR63P5 PR63G5

6" PR3MF6 PR3CP6 PR63P6 N/A

ROUND CORRUGATED

2" N/A RC3CP2 RC63P2 N/A

3" RC3 __ __3 RC3CP3 RC63P3 RC63G3

4" RC3 __ __4 RC3CP4 RC63P4 RC63G4

5" RC3MF5 RC3CP5 RC63P5 RC63G5

6" RC3MF6 RC3CP6 RC63P6 N/A

GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Square Corrugated Elbows - 30 pcs./ctn. Copper Elbows - 10 pcs./ctn. All 2" - 20 pcs./ctn.

• Elbow angles Available in 90 Degrees (4), STANDARD 75 Degrees (3), 60 Degrees (2), 45 Degrees (1) and 30 Degrees (0).• Elbow angles specified other than the Standard 75 Degrees (3) are Considered a Special Order and may Require an Extended Lead

Time.• Aluminum Elbows are Available in Mill Finished and also in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB),

Clay (CL) - 2" x 3" Only and Satin White (SW) - 2" x 3" Only.• 2" x 3" Aluminum Elbows are .016 Standard Gauge.• 3" x 4" Aluminum Elbows are .019 Standard Gauge.• Painted Galvanized Steel Elbows are Available in White (WS) and Brown (BS).• Special Order Elbows are Not Subject to Cancellation or Return.

ENTER COLOR/ANGLE CODE WHEN ORDERING

Style A

Style B

Plain Square Elbows• All Plain Square Elbows are Special Items and may Require Additional Lead Time.• All Plain Square Elbows are Bent at a 75 Degree Angle. Plain Square Elbows are NOT Crimped. They must be Hand Crimped in the Field.• Aluminum Elbows are Available in High Gloss White (W), Royal Brown (B) and Mill Finished (M).• Stainless Steel is a Special Order and may Require Extended Lead Time of at Least 2 Weeks.• Special Order Elbows are Not Subject to Cancellation or Return.

ENTER COLOR/ANGLE CODE WHEN ORDERING

METAL: .032 Aluminum 16 Oz. Copper 26 Ga. Galv. Steel

Size: Code Price Code Price Code Price

2" x 3" - A Style N/A PSAC23 N/A

2" x 3" - B Style N/A PSBC23 N/A

3" x 4" - A Style PSA__34 PSAC34 PSA634

3" x 4" - B Style PSB__34 PSBC34 PSB634

4" x 5" - A Style PSA__45 PSAC45 PSA645

4" x 5" - B Style PSB__45 PSBC45 PSB645

5" x 6" - A Style PSA__56 PSAC56 PSA656

5" x 6" - B Style PSB__56 PSBC56 PSB656

Style B

Style A

METAL: Aluminum Mill Finished Alum. 16 Oz. Copper 26 Ga. Galv. Steel 26 Ga. Paint Galv. Steel Paintgrip

Size: Code Price Code Price Code Price Code Price Code Price Code Price

2" x 2" N/A N/A SA3CP2 SA63P2 N/A N/A

2" x 3" - A Style SA__ __ 33 SA3MF3 SA3CP3 SA63P3 SA3 __ __3 SA63G3

2" x 3" - B Style SB__ __ 33 SB3MF3 SB3CP3 SB63P3 SB3 __ __3 N/A

3" x 4" - A Style SA__ __ 34 SA3MF4 SA3CP4 SA63P4 SA3 __ __4 SA63G4

3" x 4" - B Style SB__ __ 34 SB3MF4 SB3CP4 SB63P4 SB3 __ __4 N/A

4" x 5" - A Style SA__ __ 35 SA3MF5 SA3CP5 SA63P5 SA3 __ __5 SA63G5

4" x 5" - B Style SB__ __ 35 SB3MF5 SB3CP5 SB63P5 SB3 __ __5 N/A

SQUARE ELBOWS

Page 281/07

GUTTER ACCESSORIES

Plain Round Offsets - 10 pcs. per ctn• .019 Aluminum Offsets are Available in White (WA) Only.• Copper (CP) is Available in 16 Oz. Only.• Galvanized Steel (GS) is Available in 26 Gauge Only.

ENTER COLOR/METAL CODE WHEN ORDERING

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ROUND & SQUARE OFFSETS

Page 291/07

"X"

"H"

"D"

"O"

"W"

"X"

"L"

"H"

"O"

Pipe Size Offset "O" Diameter "D" "X" Height "H" Code Price

3" PR 1.5" 3" 2.5" 9.2" OFPR3__ __15

3" PR 3" 3" 2.5" 12.0" OFPR3__ __3

3" PR 4" 3" 2.5" 13.5" OFPR3__ __4

3" PR 5" 3" 2.5" 14.5" OFPR3__ __5

4" PR 1.5" 4" 3" 11.4" OFPR4__ __15

4" PR 3" 4" 3" 14.1" OFPR4__ __3

4" PR 4" 4" 3" 15.9" OFPR4__ __4

4" PR 5" 4" 3" 17.7" OFPR4__ __5

Square Corrugated Offsets - 10 pcs. per ctn• .019 Aluminum Offsets are Available in White (WA) Only.• Copper (CP) is Available in 16 Oz. Only.• Galvanized Steel (GS) is Available in 26 Gauge Only.

ENTER COLOR/METAL CODE WHEN ORDERING

Pipe Size Offset "O" Length "L" Width "W" "X" Height "H" Code Price

2" x 3" Sq. Corr. 1.5" 3" 2" 2.5" 9.2" OFSC3__ __15

2" x 3" Sq. Corr. 3" 3" 2" 2.5" 12.0" OFSC3__ __3

2" x 3" Sq. Corr. 4" 3" 2" 2.5" 13.5" OFSC3__ __4

2" x 3" Sq. Corr. 5" 3" 2" 2.5" 14.5" OFSC3__ __5

3" x 4" Sq. Corr. 1.5" 4" 3" 3" 11.4" OFSC4__ __15

3" x 4" Sq. Corr. 3" 4" 3" 3" 14.1" OFSC4__ __3

3" x 4" Sq. Corr. 4" 4" 3" 3" 15.9" OFSC4__ __4

3" x 4" Sq. Corr. 5" 4" 3" 3" 17.7" OFSC4__ __5

GUTT

ER A

CCES

SORI

ES

Metal: Painted Aluminum Copper

Size Code Price Code Price

5" 41__ __ __5 41KCP5

6" 41__ __ __6 41KCP6

40K Fascia Hanger with Snap Strap - 50 pcs. per ctn.• 5" Aluminum Available in High Gloss White (KWA), Royal Brown (BRA) and Mill Finished (KMF).• 6" Aluminum Available in High Gloss White (KWA), Royal Brown (BRA), Dark Bronze (KDB) and Mill Finished (KMF).• 5" & 6" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).

ENTER COLOR CODE WHEN ORDERING

41K Rafter Hanger with Snap Strap - 50 pcs. per ctn.• 5" & 6" Painted Aluminum Available in High Gloss White (KWA) and Royal Brown (BRA).

ENTER COLOR CODE WHEN ORDERING

“K” Snap Strap Only for #40 & #41 Hangers - 50 pcs. per ctn.• Aluminum Available in High Gloss White (-WA), Royal Brown (BRA) and Mill Finished (-MF).

ENTER COLOR CODE WHEN ORDERING.

Premium K-Style Fascia Hanger with Crossbar - 50 pcs. per ctn.• 5" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).• 6" Painted Aluminum Available in High Gloss White Only.• Recommended Hanger for Extreme Snow Areas.

ENTER COLOR CODE WHEN ORDERING

Metal: Aluminum Copper

Size Code Price Code Price

One Size SNS__ __ __ SNS-CP

Metal: Painted Aluminum Copper

Size Code Price Code Price

5" 5PF__ __C 5PFCCP

6" 6PFHGC 6PFCCP

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

“K” STYLE HANGERS

Page 301/07

Metal: Aluminum Copper Galvanized Steel Painted Galvanized Steel

Size Code Price Code Price Code Price Code Price

4" N/A 40KCP4 40KGL4 N/A

5" 40__ __ __5 40KCP5 40KGL5 40K__ __5

6" 40__ __ __6 40KCP6 40KGL6 40K__ __6

GUTTER ACCESSORIES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Crossbar Only for Premium K-Style Fascia Hanger - 50 pcs. per ctn.• 5" & 6" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).

ENTER COLOR CODE WHEN ORDERING

R-5 Rafter Hanger with Crossbar - 50 pcs. per ctn.• Painted Aluminum Available in High Gloss White Only.• Recommended Hanger for Extreme Snow Areas.

ENTER COLOR CODE WHEN ORDERING

K-Style Hidden Hanger - 100 pcs. per ctn.

Metal: Painted Aluminum

Size Code Price

5" R5HGCB

Metal: Painted Aluminum Copper

Size Code Price Code Price

5" 5PCB__ __ 5PCBCP

6" 6PCB__ __ 6PCBCP

“K” STYLE HANGERS

Page 311/07

Standard Box - 100 pcs./ctn. Bulk Box - 500 pcs./ctn.

Metal: Mill Finished Aluminum Mill Finished Aluminum

Size Code Price Code Price

5" HHMT-5 HHMTB-5

6" HHMT-6 N/A

K-Style Hidden Hanger with Screw for Straight Back Gutter -5" Alum. - 100 pcs./ctn. 6" Alum. - 75 pcs./ctn.Metal: Mill Finished Alum. Copper With Screw Copper Without Screw Economy Mill Fin. Alum.

Size Code Price Code Price Code Price Code Price

5" HID5S HIDC5S HIDC5 HID5SE

6" HID6S HIDC6S HIDC6 HID6SE

Metal: Mill Finished Aluminum

Size Code Price

5" HID5SH

6" HID6SH

K-Style Hidden Hanger with Screw for Hem Back Gutter - 100 pcs./ctn.

Economy Model

GUTT

ER A

CCES

SORI

ES

Custom Crossbar Hanger - 50 pcs. per ctn.

K-Style Wrap Around Hanger - 50 pcs. per ctn.• 5" Aluminum Available in High Gloss White (WA), Royal Brown (BR) and Mill Finished (MF).• 6" Painted Aluminum Available in High Gloss White (WA) and Royal Brown (BR).• 5" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).

ENTER COLOR CODE WHEN ORDERING

Hidden Canadian Bar Hanger - 50 pcs. per ctn.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Metal: Mill Finished Aluminum

Size Code Price

5" CBH-MF

Metal: Mill Finished Aluminum-.125" Brass-.125" Stainless Steel-.125"

Size Code Price Code Price Code Price

5" N/A CB5-BS CB5-SS

6" CB6-MF CB6-BS CB6-SS

7" CB7-MF CB7-BS CB7-SS

8" CB8-MF CB8-BS CB8-SS

Metal: Aluminum Copper Galvanized Steel Painted Galvanized Steel

Size Code Price Code Price Code Price Code Price

5" KWH__ __5 KWHCP5 KWHGL5 KWH__ __5

6" KWH__ __6 KWHCP6 KWHGL6 N/A

“K” STYLE HANGERS

Page 321/07

K-Style Heavy Duty Hidden Hanger for Straight or Hem Back Gutter -50 pcs. per ctn.• Hanger has Hole to Accept Standard Rod & Nut Assembly for Use as a Roof Mount Application.

Metal: Mill Finished Aluminum

Size Code Price

5" HHMF-5

6" HHMF-6

• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..

GUTTER ACCESSORIES

Ferrule - 100 pcs. per ctn.• Bulk Orders are Packed 500 pcs. per ctn..• 5" & 6" Painted Galvanized Steel Available in White Only.

“J” Bracket used with 5", 6", 7" & 8" High Back Gutter

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Metal: Mill Finish Alum. - 100 pcs./ctn. Brass - 50 pcs./ctn.

Size Code Price Code Price

One Size JBRACK JBRACB

Roof Bar Hanger with Rod & Nut - 100 pcs. per ctn.Metal: Mill Finished Aluminum

Size Code Price

5" RBRHMF

“K” STYLE HANGERS

Page 331/07

Gutter Spike - Aluminum 500 pcs. per ctn., Copper & Galvanized 100 pcs. per ctn.• 7" & 8" Painted Aluminum Available in White (WA) and Royal Brown (BR).• 7" & 8" Painted Galvanized Steel Available in White (WS) and Brown (BS).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Copper Galvanized Steel Painted Galvanized Steel

Size Code Price Code Price Code Price Code Price

7" SPK__ __7 SPKCP7 SPKGL7 SPK__ __7

8" SPK__ __8 SPKCP8 SPKGL8 SPK__ __8

Metal: Mill Finished Alum. Copper Galvanized Steel Painted Galv. Steel Plastic

Size Code Price Code Price Code Price Code Price Code Price

4" N/A FERCP4 FERGL4 N/A N/A

5" FERMF5 FERCP5 FERGL5 FERWS5 FERPL5

5" Bulk FERBM5 N/A FERGB5 N/A N/A

6" FERMF6 FERCP6 N/A FERWS6 N/A

6" Bulk FERBM6 N/A FERGB6 N/A N/A

• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..

GUTT

ER A

CCES

SORI

ES

Gem Circle with Spring Clip, Nut & Bolt - 50 pcs. per ctn.• 5" & 6" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).• 5" & 6" Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).

ENTER COLOR CODE WHEN ORDERING

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

HALF ROUND HANGERS

Page 341/07

Metal: Aluminum Copper Galvanized Steel Painted Galvanized Steel

Size Code Price Code Price Code Price Code Price

4" N/A CIRCP4 CIRCS4 N/A

5" CIR __ __5 CIRCP5 CIRCS5 CIR__ __5

6" CIR__ __6 CIRCP6 CIRCS6 CIR__ __6

#10 Combination Circle & Shank with Spring Clip - 50 pcs. per ctn.• 5" & 6" Aluminum Available in High Gloss White (CHG), Royal Brown (CBA) and Mill Finished (A10).

ENTER COLOR CODE WHEN ORDERING

Metal: Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

5" CB__ __ __5 CCC105 CCS105

6" CB__ __ __6 CCC106 CCS106

#10 Combination Circle & Shank with Spring Clip - 50 pcs. per ctn.Metal: Copper Galvanized Steel

Size Code Price Code Price

4" CCC104 CCS104

Face Mount Hanger with Crossbar and Spring Clip - 50 pcs. per ctn.• Hanger is Made from 3/16" x 1" Bar Stock and Come with a 1/16" x 1' Crossbar Used for Added Strength.• 7" & 8" Galvanized Steel and Paintgrip are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks.

Special Orders are Not Subject to Cancellation or Return.• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..

Metal: Mill Finished Aluminum Copper Galvanized Steel Paintgrip

Size Code Price Code Price Code Price Code Price

7" HRFMF7 HRFCP7 HRFGL7 HRFPG7

8" HRFMF8 HRFCP8 HRFGL8 HRFPG8

U. S. Patent Pending

U. S. Patent Pending

Hidden Hanger for Reverse Bead Gutter Only (Gutter Not Sold at Berger)100 pcs. per ctn.

Metal: Painted Aluminum Copper

Size Code Price Code Price

6" HIDHA6 HIDHC6

• Painted Aluminum Available in White Only.

GUTTER ACCESSORIES

• 5" & 6" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Rival Strap Hanger - 50 pcs. per ctn.

Metal: Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

4" N/A RIVCP4 RIVGL4

5" RIV __ __5 RIVCP5 RIVGL5

6" RIV__ __6 RIVCP6 RIVGL6

HALF ROUND HANGERS

Page 351/07

• Hanger Includes Rod & Nut Assembly.• Improved Version of Imperial Bar Hanger.• Hanger Requires Final Form to Bead by Installer.• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..

Regal Bar Hanger - 50 pcs. per ctn.

Metal: Mill Finished Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

5" REGMF5 REGCP5 REGGL5

6" REGMF6 REGCP6 REGGL6

7" REGMF7 REGCP7 REGGL7

8" REGMF8 REGCP8 REGGL8

Regal Double Bead Bar Hanger - 50 pcs. per ctn.

Metal: Mill Finished Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

5" REGDM5 REGDC5 REGDG5

6" REGDM6 REGDC6 REGDG6

7" REGDM7 REGDC7 REGDG7

8" REGDM8 REGDC8 REGDG8

U. S. Patent Pending

U. S. Patent Pending

• Hanger Includes Rod & Nut Assembly.• Improved Version of Double Bead Hanger.• Hanger Requires Final Form to Bead by Installer.• 7" & 8" Mill Finished Aluminum Hangers are Considered a Special Order and may Require Extended Lead Time of at Least 2

Weeks. Special Orders are Not Subject to Cancellation or Return.• Hanger Spacing for 7" & 8" Gutter Should Not Exceed 24" O.C..

GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

HALF ROUND HANGERS

Page 361/07

Spring Clip for Gem Circle / #10 Combination Hanger - 50 pcs. per bag• Painted Aluminum Available in High Gloss White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Brass Galvanized Steel

Size Code Price Code Price Code Price

One Size SPCL__ __ SPCLBR SPCLGL

Nut & Bolt for Shanks - 50 pcs. per ctn.• #10 - 24 Thread x 3/4" Long.

Metal: Brass Galvanized Steel

Size Code Price Code Price

One Size BN-CP BN-S

Rod & Nuts for Regal Bar Hanger - 100 pcs. per ctn.• Brass is used with Copper Hanger.

Metal: Mill Finished Aluminum Brass Galvanized

Size Code Price Code Price Code Price

One Size RODNUT RNBRAS SRDNUT

Regal Single Bead Flange Gutter Roof Strap Hanger - 50 pcs. per ctn.• Crossbar Nail Type Hanger.

Metal: Copper Galvanized Steel

Size Code Price Code Price

5" REGFC5 REGFG5

6" REGFC6 REGFG6

GUTTER ACCESSORIES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

#6 Shank for Ogee or Crown Molding - 50 pcs. per ctn.• Painted Galvanized Steel is Available in White (WS) and Royal Brown (BS).

ENTER COLOR CODE WHEN ORDERING

Copper Galvanized Steel Painted Galvanized Steel

Code Price Code Price Code Price

SHCP-6 SHCS-6 SH__ __-6

#8 Shank for Cornice - 50 pcs. per ctn.Malleable Iron

Code Price

SH-CM8

#10 Shank for Fascia - 50 pcs. per ctn.• Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).• Painted Galvanized Steel Available in White Only.

ENTER COLOR CODE WHEN ORDERING

#11 Shank for Nailing to Exposed Rafter - 50 pcs. per ctn.• Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum Copper Galvanized Steel

Code Price Code Price Code Price

SH__ __11 SHCP11 SHCS11

Painted Aluminum Copper Galvanized Steel Painted Galvanized Steel

Code Price Code Price Code Price Code Price

SH__ __10 SHCP10 SHCS10 SHWS10

“K” STYLE & HALF ROUNDSHANKS

Page 371/07

#10 Shank Plate for Fascia - 50 pcs. per ctn.• Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

Aluminum Copper Galvanized Steel

Code Price Code Price Code Price

SH__ __-1 SHCP-1 SHCS-1U. S. Patent Pending

GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

#12 Shank for Nailing to Sheeting - 1/3 Pitch - 50 pcs. per ctn.• Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).• Painted Galvanized Steel is Available in White (WS) and Royal Brown (BS).

ENTER COLOR CODE WHEN ORDERING

#25 Shank for Nailing to Sheeting - 1/2 Pitch - 50 pcs. per ctn.

#30 Shank for Adjustable Pitch Rafters & Fascia - 50 pcs. per ctn.• Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum Copper Galvanized Steel

Code Price Code Price Code Price

SH__ __30 SHCP30 SHCS30

Shank Extension - 50 pcs. per ctn.• Aluminum Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum Copper Galvanized Steel

Code Price Code Price Code Price

SH__ __EX SHCPEX SHCSEX

Copper Galvanized Steel

Code Price Code Price

SHCP25 SHCS25

“K” STYLE & HALF ROUNDSHANKS

Page 381/07

Aluminum Copper Galvanized Steel Painted Galvanized Steel

Code Price Code Price Code Price Code Price

SH__ __12 SHCP12 SHCS12 SH__ __12

GUTTER ACCESSORIES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

K-Style End Cap - LEFT and RIGHT - 50 pcs. per ctn.

Half Round End Cap “C” Style - 50 pcs. per ctn.• Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Paintgrip (26 gauge)

Size Code Price Code Price Code Price Code Price

4" N/A CENCP4 CEN264 N/A

5" CEN__ __5 CENCP5 CEN265 CEN6G5

6" CEN__ __6 CENCP6 CEN266 CEN6G6

7" CEN__ __7 CENCP7 CEN267 CEN6G7

8" CEN__ __8 CENCP8 CEN268 CEN6G6

“K” STYLE & HALF ROUNDEND CAPS

Page 391/07

• 5" Aluminum Available in High Gloss White (HG), Satin White (SW), Royal Brown (BR), Clay (CL) and Mill Finished (MF).• 6" Aluminum Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF).• 7" & 8" Aluminum Available in High Gloss White (HG) and Dark Bronze (DB) .• Painted Galvanized Steel Available in White (WS) and Royal Brown (BS).

ENTER COLOR CODE WHEN ORDERING

Left

Right

Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Painted Gal. Steel Paintgrip (26 Ga.)

Size Code Price Code Price Code Price Code Price Code Price

LEFT

4" N/A ENLCP4 ENL264 N/A N/A

5" ENL__ __5 ENLCP5 ENL265 ENL__ __5 ENL6G5

6" ENL__ __6 ENLCP6 ENL266 ENL__ __6 ENL6G6

7" ENL__ __7 ENLCP7 ENL267 ENL__ __7 ENL6G7

8" ENL__ __8 ENLCP8 ENL268 ENL__ __8 ENL6G8

RIGHT

4" N/A ENRCP4 ENR264 N/A N/A

5" ENR__ __5 ENRCP5 ENR265 ENR__ __5 ENR6G5

6" ENR__ __6 ENRCP6 ENR266 ENR__ __6 ENR6G6

7" ENR__ __7 ENRCP7 ENR267 ENR__ __7 ENR6G7

8" ENR__ __8 ENRCP8 ENR268 ENR__ __8 ENR6G8

GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

K-Style 90 Degree Box Miter - INSIDE and OUTSIDE - 20 pcs. per ctn.• 5" & 6" Painted Aluminum Available in High Gloss White (SG), Royal Brown (SB), Clay (CL), Satin White (SW) and

Dark Bronze (DB) - 6" Only.• 7" & 8" Painted Aluminum Available in High Gloss White (32) and Royal Brown (BR).• 5" & 6" Painted Galvanized Steel Available in White Only.• 7" & 8" Painted Aluminum and Copper Miters will have Break Lines.

ENTER COLOR CODE WHEN ORDERING

K-Style 90 Degree Strip Miter - INSIDE and OUTSIDE - 20 pcs. per ctn.• 5" & 6" Painted Aluminum Available in High Gloss White (HG), Satin White (LG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

“K” STYLE MITERS

Page 401/07

Metal: Painted Aluminum

Size Code Price

INSIDE

5" SMI__ __5

6" SMI__ __6

OUTSIDE

5" SMO__ __5

6" SMO__ __6

Inside

Outside

Inside

Outside

Metal: Painted Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Painted Gal. Steel Paintgrip (26 Ga.)

Size Code Price Code Price Code Price Code Price Code Price

INSIDE

4" N/A KISCP4 KIS264 N/A N/A

5" KIS__ __5 KISCP5 KIS265 KISWS5 KIS6G5

6" KIS__ __6 KISCP6 KIS266 KISWS6 KIS6G6

7" KIS__ __7 KISCP7 KIS267 N/A N/A

8" KIS__ __8 KISCP8 KIS268 N/A N/A

OUTSIDE

4" N/A KOSCP4 KOS264 N/A N/A

5" KOS__ __5 KOSCP5 KOS265 KOSWS5 KOS6G5

6" KOS__ __6 KOSCP6 KOS266 K0SWS6 KOS6G6

7" KOS__ __7 KOSCP7 KOS267 N/A N/A

8" KOS__ __8 KOSCP8 KOS268 N/A N/A

GUTTER ACCESSORIES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Half Round 90 Degree Miter - INSIDE and OUTSIDE - 20 pcs. per ctn.• 5" Aluminum Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).• 6", 7" & 8" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

HALF ROUND MITERS

Page 411/07

Inside

Outside

Metal: Aluminum Copper (16 Oz.) Galv. Steel (26 Ga.) Paintgrip (26 Ga.)

Size Code Price Code Price Code Price Code Price

INSIDE

4" N/A LISCP4 LIS264 N/A

5" LIS__ __5 LISCP5 LIS265 LIS6G5

6" LIS__ __6 LISCP6 LIS266 LIS6G6

7" LIS__ __7 LISCP7 LIS267 N/A

8" LIS__ __8 LISCP8 LIS268 N/A

OUTSIDE

4" N/A LOSCP4 LOS264 N/A

5" LOS__ __5 LOSCP5 LOS265 LOS6G5

6" LOS__ __6 LOSCP6 LOS266 LOS6G6

7" LOS__ __7 LOSCP7 LOS267 N/A

8" LOS__ __8 LOSCP8 LOS268 N/A

GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

K-Style End Piece - 5" x 3" - 20 pcs. per ctn.• 5" x 3" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).• 5" x 3" Painted Galvanized Steel is Available in White Only.

ENTER COLOR CODE WHEN ORDERING

K-Style Slip Joint - 50 pcs. per ctn.• 5" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BR).• 5" Painted Galvanized Steel Available in White Only.• KSJ265 Available in 30 pieces per carton.

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge) Painted Gal. Steel

Size Code Price Code Price Code Price Code Price

4" N/A N/A KSJ264 N/A

5" KSJ__ __5 KSJCP5 KSJ265 KSJWS5

Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge) Painted Gal. Steel

Size Code Price Code Price Code Price Code Price

5" x 3" KEP__ __5 KEPCP5 KEP265 KEPWS5

Half Round End Pieces - 20 pcs. per ctn.• 5" x 3" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge)

Size Code Price Code Price Code Price

4" x 3" N/A N/A DE2643

5" x 3" DEP__ __5 DECP53 DE2653

6" x 4" N/A N/A DE2664

Half Round Slip Joint - 50 pcs. per ctn.• 5" & 6" Painted Aluminum Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Copper (16 oz) Galvanized Steel (26 gauge)

Size Code Price Code Price Code Price

4" N/A SCNCP4 SCN264

5" SCN__ __5 SCNCP5 SCN265

6" SCN__ __6 SCNCP6 SCN266

“K” STYLE & HALF ROUNDEND PIECES / SLIP JOINTS

Page 421/07

GUTTER ACCESSORIES

K-Style Square Outlet with “Lock-In” Design - 50 pcs. per ctn.• Mill Finished Aluminum Square Outlets are Pop Rivet Style.• Painted Aluminum is Available in White Only.

Metal: Mill Finished Aluminum Painted Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.)

Size Code Price Code Price Code Price Code Price

2" x 3" SKOMF3 SKOHG3 SKOCP3 SKO263

3" x 4" SKOMF4 SKOHG4 SKOCP4 SKO264

4" x 5" SKOMF5 N/A SKOCP5 SKO265

K-Style Oval Outlet with “Lock-In” Design - 50 pcs. per ctn.

Half Round B Style Outlet - 50 pcs. per ctn.• 3" & 4" Aluminum is Available in High Gloss White (HG), Royal Brown (BA) and Mill Finished (MF).• 5" & 6" Aluminum is Available in Mill Finished Only.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Metal: Mill Finished Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.)

Size Code Price Code Price

3" OKOMF3 OKOCP3 OKO263

4" OKOMF4 OKOCP4 OKO264

3” & 4”

5” & 6”

“K” STYLE & HALF ROUNDOUTLETS

Page 431/07

K-Style Wide Flange Pop Rivet Oval Outlet - 50 pcs. per ctn.• 3" Aluminum is Available in Mill Finished Only.• 4" Aluminum is Available in White Only.• 3" & 4" Painted Galvanized Steel are Available in White Only.

ENTER COLOR CODE WHEN ORDERING

Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.) Painted Galvanized Steel

Size Code Price Code Price Code Price Code Price

3" WKOMF3 WKOCP3 WKOGS3 WKOWS3

4" WKOWA4 N/A WKOGS4 WKOWS4

U. S. Patent 4,619,544

U. S. Patent 4,619,544

Metal: Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.)

Size Code Price Code Price Code Price

3" RBO__ __3 RBOCP3 RBO263

4" RBO__ __4 RBOCP4 RBO264

5" RBOMF5 RBOCP5 RBO265

6" RBOMF6 RBOCP6 RBO266 GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

• 3" Aluminum is Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Half Round WB Pop Rivet Style Outlet - 50 pcs. per ctn.

Metal: Painted Aluminum Copper (16 Oz.) Galvanized Steel (26 Ga.)

Size Code Price Code Price Code Price

3" WBP__ __3 WBPCP3 WBP263

“K” STYLE & HALF ROUNDOUTLETS

Page 441/07

Half Round Wide Flange B Style Outlet - 50 pcs. per ctn.• 3" & 4" Aluminum is Available in High Gloss White (HG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum

Size Code Price

3" WBO__ __3

4" WBO__ __4

GUTTER ACCESSORIES

ALITY RDP, EDGINGS & COIL UALITYALITY RDPRDP, EDGINGSDGINGS & COILOILQQUALITY RDP, EDGINGS & COILPage 45

1/07

AVAILABLE IN A VARIETY OF POPULAR COLORS - (SEE PAGE 48)

CS4 Drip Edge

A5 Drip Edge B4 1/2 Roof Edge BS4 1/2 Roof Edge

C4 1/2 Drip Edge C6 Drip Edge

Add Beauty by Coordinating Colors on Your Building Exterior Includes Drip Edge, Soffit, Fascia, J-Channel, Trim Coil and Gutter Coil

MATERIALS: • .019 Painted Aluminum• .010 Painted Aluminum• .016 Painted Galvanized Steel

A5

3"

1"

1" B4 1/2

1/2"

1 1/2"

2 1/2"

BS4 1/2

1/2"

2"

2"

CS4

1/4"

2"

3"

C4 1/2

3"

1/4"

1 1/2"

MATERIALS: • .019 Painted Aluminum

MATERIALS: • .019 Painted Aluminum

MATERIALS: • 24 Gauge Steel Kynar– Black, Bronze, Brown & White

MATERIALS: • .019 Painted Aluminum

MATERIALS: • .019 Painted Aluminum• .016 Painted Galvanized Steel• .010 Painted Galvanized Steel

C63"

3"

3/8"

ALITY RDP, EDGINGS & COILQUALITYALITY RDPRDP, EDGINGSDGINGS & COILOILQUALITY RDP, EDGINGS & COILPage 46

1/07

AVAILABLE IN A VARIETY OF POPULAR COLORS - (SEE PAGE 48)

ODLR Drip Edge

H6F Slag Stop H7 Slag Stop ODE Overhanging Drip Edge

"W" Valley "V" Valley

F5M Drip Edge

F4 1/2 Open Drip Edge FSN4 1/2 Drip Edge F5 Open Drip Edge

F5 1/2 Open Drip Edge H5 1/2 Slag Stop

MATERIALS: • .019 Painted Aluminum

MATERIALS: • .019 Painted Aluminum

MATERIALS: • .019 Painted Aluminum• .010 Painted Aluminum• .016 Painted Galvanized Steel• .010 Painted Galvanized Steel

MATERIALS: • .024 Painted Aluminum• .019 Painted Aluminum• .010 Painted Aluminum• .016 & .010 Painted Galvanized Steel• 16 Oz. Copper

MATERIALS: • 24 Gauge Steel Kynar– Black, Bronze, Brown & White

MATERIALS: • .019 Painted Aluminum

FSN4 1/2

3"

3/8"1"3/16"

F5 1/2 Open

3 1/4"

5/16"

1/4"

11/16"3/4" H5 1/2

11/16"

2"

2 3/8"

5/16"

F5M

2 5/8"

1 1/2"

3/16"

1/2"

F5 Open

2 7/8"

5/16"

11/16"

1/4"

3/4"

F4 1/2 Open

1/4"

11/16"

5/16"

2 9/16"

MATERIALS: • 24 Gauge Steel Kynar– Black, Bronze, Brown & White

MATERIALS: • .019 Painted Aluminum• .010 Painted Aluminum

MATERIALS: • Mill Finished Aluminum• .016 Painted Galvanized Steel

MATERIALS: • .019 Painted Aluminum• .016 Painted Galvanized Steel

MATERIALS: • Mill Finished Aluminum• .019 Painted Galvanized Steel• Galvanized Steel• Copper

H6F

3/4"

1 1/2"

3 1/8"

5/16"

MATERIALS: • 24 Gauge Steel Kynar– Black, Bronze, Brown & White

ODE

3/8"

2"

2 1/2"

1/4"

1/8"

ODLR

2 5/8"

1/2"

1 3/4"

1/4"

3/16" W

18", 20" or 24" GirthWith Cleat Hem

1"1"

H7

7/8"

3"

4"

3/8"

18" GirthWith Cleat Hem

V

UALITYALITY RDPRDP, EDGINGSDGINGS & COILOILQQUALITY RDP, EDGINGS & COILPage 47

1/07

AVAILABLE IN A VARIETY OF POPULAR COLORS - (SEE PAGE 48)

1/2 Aluminum "J" Channel

12" Traplok Aluminum Soffit 6" Aluminum Fascia 1/2 Aluminum "F" Channel

5" & 6" K Style Gutter 2 x 3 and 3 x 4 Downspouts

Trim Coil

Step Flashing Flashing Rolls Diamond Bands

Gutter Coil Mini Gutter Coil

MATERIALS: • Black, Brown, White & Terratone Painted Aluminum• Mill Finished Aluminum• Copper

MATERIALS: • Aluminum• Galvanized Steel

MATERIALS: • 24" x 50'

MATERIALS: • Painted Aluminum • .027 x 11 3/4" • .032 x 11 7/8"• Copper

MATERIALS:• Painted Aluminum

MATERIALS: • Painted Aluminum • .027 x 11 3/4" • .032 x 11 7/8" • .032 x 15"

MATERIALS: • .019 Painted Aluminum

MATERIALS: • .019 Painted Aluminum

1/2"

6"

6"6"

1 1/8"

7/16"

6"6"

1 1/8"

7/16"

3 1/8"Ventilated

Width

3 1/8"Ventilated

Width

MATERIALS: • .019 Painted Aluminum

MATERIALS: • .019 Painted Aluminum

1/2"

3/4"

1 1/2"

1"

1/2"

1 3/4"1 1/8"

MATERIALS: • Painted Aluminum• 10' - 20' Lengths

MATERIALS: • Painted Aluminum

UALITY RDP, EDGINGS & COIL

UALITYALITY RDPRDP, EDGINGSDGINGS & COILOILQQUALITY RDP, EDGINGS & COILPage 48

1/07

AVAILABLE IN A VARIETY OF POPULAR COLORS - (SEE BELOW)

Elbows

MATERIALS: • Painted Aluminum

Available 2 x 3 and 3 x 4 in A Style and B Style

End Caps Miters Touch-Up Paint

MATERIALS: • Painted Aluminum

TOUC

H-UP

PAI

NT

MATERIALS: • Painted Aluminum

Available Left and Right Available Inside and Outside Available in 12 Oz. Cans

White - 30 White - 80 Bone Linen Herringbone Almond

Cream Ivory Prairie Sand Clay Wicker

Buckskin Brown Beaver Brown Terra-Bronze Dark Bronze Musket Brown

Royal Brown Black Tuxedo Gray CB Gray

Grecian Green Red

Pearl Gray

AVAILABLE IN THESE POPULAR COLORS!

Due to printing limitations, colors shown here are not exact to actual colors. Please contact Berger for an actual color sample.Some colors may be considered a special order.

ALITY RDP, EDGINGS & COIL

“K” STYLE & HALF ROUNDCONDUCTOR HEADS

Page 491/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Plain Conductor Head with Oval Outlet* - 3" - 6 pcs. per ctn. 4" - 4 pcs. per ctn. 5" - 3 pcs. per ctn.

• 3" and 4" Aluminum Available in High GlossWhite (HG) and Royal Brown (BR).

• 5" Aluminum Available in High Gloss WhiteOnly.

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum

Size Code Price

3" CHO__ __3

4" CHO__ __4

5" CHOHG5*5” Plain Conductor Head has a Square Outlet.

#14 Conductor Head with Oval Outlet -3", 4" & 5" - 6 pcs. per ctn. 6" - 4 pcs. per ctn.

Metal: Copper Galvanized Steel Paintgrip

Size Code Price Code Price

3" CHOCP3 CHOGL3 CHFPG3

4" CHOCP4 CHOGL4 CHFPG4

5" CHOCP5 CHOGL5 N/A

6" CHOCP6 CHOGL6 N/A

3" Plain Conductor Head 4" Plain Conductor Head 5" Plain Conductor Head

3" & 4" Conductor Heads 5" & 6" Conductor Heads

Molded Universal Conductor Head

Polypropylene "Plastic"

Code Price

CHFMUW

• Available in White Only.• Suited for Any Outlet Shape or Size.

NOTE: Small spot welds may be visible on Galvanized Steel Conductor Heads Only.

GUTT

ER A

CCES

SORI

ES

GUTTER ACCESSORIES

Square "Y" Funnel - 12 pcs. per ctn.• Painted Aluminum is Available in High Gloss White (HG), Low Gloss White (LG) and Royal Brown (BR).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum

Size Code Price

2" x 3" SCY__ __3

3" x 4" SCY__ __4

“K” STYLE & HALF ROUNDEAVE BOXES / FUNNELS /

DIVERTERS

Page 501/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Regular (Open), Closed and Sloped Eave Boxes -Regular & Closed - 12 pcs. per ctn. Sloped - 6 pcs. per ctn.

• All Painted Aluminum Available in High Gloss White Only.

Metal: Painted Aluminum Copper

Size Code Price Code Price

REGULAR (OPEN)

3" x 12" EBWA32 EBCP32

3" x 16" EBWA36 EBCP36

4" x 12" EBWA42 EBCP42

CLOSED

3" x 16" CBWA36 CBCP36

4" x 16" CBWA46 CBCP46

SLOPED

3" x 16" SBWA36 SBCP36

4" x 16" SBWA46 SBCP46

Oval Funnel - 12 pcs. per ctn.• Painted Aluminum is Available in White (WA) and Royal Brown (BR).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

3" FUN__ __3 FUNCP3 FUNGL3

4" FUN__ __4 N/A FUNGL4

Downspout Tube - 12 pcs. per ctn.• Painted Aluminum is Available in White Only.

Metal: Painted Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

2" DSTWA2 DSTCP2 DSTGL2

3" DSTWA3 DSTCP3 DSTGL3

4" DSTWA4 DSTCP4 DSTGL4

“K” STYLE & HALF ROUNDDIVERTERS /

DOWNSPOUT TUBES

Page 511/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Square Cutoff with Diverter - 12 pcs. per ctn.• Painted Aluminum is Available in High Gloss White (WA), Low Gloss White (LG) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum

Size Code Price

2" x 3" SAC__ __3

3" x 4" SAC__ __4

Round Corrugated Cutoff with Diverter - 12 pcs. per ctn.• Painted Aluminum is Available in High Gloss White Only.

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum

Size Code Price

3" RC RCCWA3

GUTT

ER A

CCES

SORI

ES

Brick Hook - ROUND and SQUARE - 50 pcs. per ctn.• Painted Galvanized is Available in White Only.

Stamped Sickle Hook for Wood - ROUND and SQUARE - 50 pcs. per ctn.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

“K” STYLE & HALF ROUNDPIPE FASTENERS

Page 521/07

Metal: Galvanized Steel Painted Galvanized Steel

Size Code Price Code Price

ROUND

3" BPRGL3 BPRWS3

4" BPRGL4 BPRWS4

SQUARE

2" x 3" BPSGL3 BPSWS3

3" x 4" BPSGL4 BPSWS4

Metal: Galvanized Steel Painted Galv. - White Painted Galv. - Royal Brown

Size Code Price Code Price Code Price

ROUND

3" PWHGL3 PWHWS3 PBRSH3

4" PWHGL4 PWHWS4 PBRSH4

SQUARE

2" x 3" SSWGL3 SSWWS3 SHBRA3

3" x 4" SSWGL4 SSWWS4 SHBRA4

Plain Round and Round Corrugated Hinged Downspout Hook -3" & 4" - 50 pcs./ctn. 5" - 25 pcs./ctn.• Non-Stock Item. Please Allow Extended Lead Time.• Copper Plated Zinc Alloy.• Must be Purchased in Full Box Quantities.

Metal: Coppered

Size Code Price

PLAIN ROUND

3" HHPRC3

4" HHPRC4

5" HHPRC5

ROUND CORRUGATED

3" HHRCC3

4" HHRCC4

5" HHRCC5

GUTTER ACCESSORIES

Rack & Key - 50 pcs. per ctn.• Aluminum is Available in High Gloss White (-WA), Royal Brown (BRA) and Mill Finished (-MF).• Two Racks are Recommended per 10 ft. Downspout Section.

ENTER COLOR CODE WHEN ORDERING

Metal: Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

One Size RAK__ __ __ RAK-CP RAK-CS

Key - 50 pcs. per ctn.Metal: Mill Finished Aluminum Bronze (Used w/ Copper)

Size Code Price Code Price

One Size KEY-MF KEY-BR

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

“K” STYLE & HALF ROUNDPIPE FASTENERS

Page 531/07

Plain Round Cast Bronze Sickle Hook - 25 pcs per ctn.• Non-Stock Item. Please Allow Extended Lead Time.• Must be Purchased in Full Box Quantities.

Metal: Bronze

Size Code Price

4" PWHBZ4

6" PWHBZ6

2" x 3" and 3" x 4" Square Side-Fasten Hook - 50 pcs. per ctn.• Non-Stock Item. Please Allow Extended Lead Time.• Copper Plated Zinc Alloy.• Must be Purchased in Full Box Quantities.

Metal: Coppered

Size Code Price

2" x 3" SFHC23

3" x 4" SFHC34

Square Wired Wood/Brick Hook - 2" x 3" and 3" x 4" - 50 pcs. per ctn. 4" x 5" - 25 pcs. per ctn.• Non-Stock Item. Please Allow Extended Lead Time.• Must be Purchased in Full Box Quantities.

Metal: Bronze

Size Code Price

2" x 3" WFHC23

3" x 4" WFHC34

4" x 5" WFHC45

GUTT

ER A

CCES

SORI

ES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

#5 Wood Drive - 50 pcs. per ctn.

#0 Masonry Drive - 50 pcs. per ctn.

#4 Wood Drive - 50 pcs. per ctn.

#6 Drive - 50 pcs. per ctn.• Aluminum Available in High Gloss White (WA-), Royal Brown (BRA) and Mill Finished (MF-).• Painted Galvanized Steel Available in White Only.• Requires Rack & Key to Install.• Two Drives are Recommended per 10 ft. Downspout Section.

ENTER COLOR CODE WHEN ORDERING

Copper Galvanized Steel

Code Price Code Price

DRCP-4 DRCS-4

Bronze Galvanized Steel

Code Price Code Price

DR-BR0 DRCS-0

Malleable Iron

Code Price

DR-CM5

Aluminum Copper Galvanized Steel Painted Galvanized Steel

Code Price Code Price Code Price Code Price

DR__ __ __6 DRCP-6 DRCS-6 DRWS-6

“K” STYLE & HALF ROUNDPIPE FASTENERS

Page 541/07

U-Bracket - 50 pcs. per ctn.• Painted Aluminum is Available in High Gloss White Only.• Two Brackets are Recommended per 10 ft. Downspout Section.

Metal: Painted Aluminum Copper

Size Code Price Code Price

2" x 3" UBR-WA UBR-CP

• Requires Rack & Key to Install.• Two Drives are Recommended per 10 ft. Downspout Section.

• Requires Rack & Key to Install.• Two Drives are Recommended per 10 ft. Downspout Section.

• Requires Rack & Key to Install.• Two Drives are Recommended per 10 ft. Downspout Section.

GUTTER ACCESSORIES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

#31 Pipe Cleat - 50 pcs. per ctn.• Painted Aluminum is Available in High Gloss White (HG) and Brown (BR).• Two Pipe Cleats are Recommended per 10 ft. Downspout Section.

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum Copper

Code Price Code Price

PC__ __31 PCCP31

“K” STYLE & HALF ROUNDPIPE FASTENERS

Page 551/07

Metco Ornamental Conductor Bands - 100 pcs. per ctn.• Painted Aluminum is Available in High Gloss White (HG), Royal Brown (BR) and Dark Bronze (DB).• Two Conductor Bands are Recommended per 10 ft. Downspout Section.

ENTER COLOR CODE WHEN ORDERING

Metal: Painted Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

3" MET__ __3 METCP3 METGA3

4" MET__ __4 METCP4 METGA4

Universal Conductor Band - 50 pcs. per ctn.• Aluminum is Available in High Gloss White (WA), Low Gloss White (LG), Royal Brown (BA), Dark Bronze (DB) and

Mill Finished (MF).• Painted Galvanized Steel is Available in White (WS) and Brown (BS).• Two Conductor Bands are Recommended per 10 ft. Downspout Section.

ENTER COLOR CODE WHEN ORDERING

Aluminum Copper Galvanized Steel Painted Galvanized Steel

Code Price Code Price Code Price Code Price

__ __12CB CP12CB GA12CB __ __12CB

• Painted Aluminum is Available in High Gloss White (HG) and Royal Brown (BA).• Two Brackets are Recommended per 10 ft. Downspout Section.

ENTER COLOR CODE WHEN ORDERING

Conductor Bracket - 50 pcs. per ctn.

Metal: Painted Aluminum Copper

Size Code Price Code Price

2" x 3" CB__ __-3 CBCP-3

GUTT

ER A

CCES

SORI

ES

Trim Nails - 1 lb. box• Aluminum Available in White Only.

Metal: Painted Aluminum

Size Code Price

1" 100WAW

Wire Strainers - ROUND - 2", 3" & 4" - 50 pcs./ctn. 5" & 6" - 20 pcs./ctn.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Gutter Wedge - 100 pcs. per ctn.

Metal: Painted Aluminum

Size Code Price

One Size GW-WA

• Painted Aluminum Available in White Only.

#42 Pop Rivet 1 1/2" - Aluminum 1,000 pcs./ctn. Stainless Steel 100 pcs./ctn.Copper & Galvanized Steel 500 pcs./ctn.

• Painted Aluminum Available in White (BW) and Royal Brown (BB).

ENTER COLOR CODE WHEN ORDERING

Metal: Mill Finished Aluminum Copper Galvanized Steel

Size Code Price Code Price Code Price

2" RWSMF2 RWSCP2 RWSGL2

3" RWSMF3 RWSCP3 RWSGL3

4" RWSMF4 RWSCP4 RWSGL4

5" RWSMF5 RWSCP5 RWSGL5

6" RWSMF6 RWSCP6 RWSGL6

#44 Pop Rivet 1 5/8" - Aluminum 1,000 pcs./ctn. Copper 500 pcs./ctn.

• Painted Aluminum Available in White (BW), Royal Brown (BB) and Dark Bronze (DB).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum Copper

Code Price Code Price

A44A__ __ A44CPB

Painted Aluminum Copper Galvanized Steel Stainless Steel

Code Price Code Price Code Price Code Price

A42A__ __ A42CPB A42GLB A42SSB

“K” STYLE & HALF ROUNDMISCELLANEOUS ACCESSORIES

Page 561/07

• Round Strainers can be used in Square Holes when Reformed by Hand.

GUTTER ACCESSORIES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Trim Nails 1 1/4" - Aluminum - 1 lb. box Copper - 1/4 lb. box• Aluminum Available in White (WAW) and Brown (BAW).

ENTER COLOR CODE WHEN ORDERING

Gutter Mastic 5 oz. Tubes - 24 pcs. per ctn.• Available in White (WA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

Touch-Up Paint 12 oz. Cans - 12 pcs. per ctn.

Metal: Painted Aluminum Copper

Size Code Price Code Price

1 1/4" 114__ __ __ 114CCP

Code Price

TUP__ __ __

• Available in High Gloss White (WHG), Satin White (SWP), White Steel (WSP), Royal Brown (BRP), Dark Bronze (DBP)and Ivory (IVY).

ENTER COLOR CODE WHEN ORDERING

Code Price

MAS__ __8

“K” STYLE & HALF ROUNDMISCELLANEOUS ACCESSORIES

Page 571/07

No-Caulk Pipe Flashing - 12 pcs. per ctn.Metal: Mill Finished Aluminum

Size Code Price

1 1/2" OMFN15

2" OMFN20

3" OMFN30

4" OMFN40

SeamerMate® 10 oz. Tubes - 12 pcs. per ctn.• Available in Gray Only.

Code Price

SMMTGR

Ladder-Max Universal Ladder Stabilizer - 1 pc. per ctn.• The galvanized steel Ladder-Max Ladder Stand-Off Stabilizer Helps Improve Efficiency and Facilitates Ladder Productivity• Size: 20-3/4"h x 38-1/2"w, Weight: 7 lbs. 11 oz.• Stand-Off Depth is 19"• OSHA and ANSI Certified and Easily Attaches and Detaches without Tools to Most Ladder Styles

Code Price

LADMAX

GUTT

ER A

CCES

SORI

ES

K-Style Drop-In Gutter Guard - Aluminum 50 pcs. per ctn.Copper 25 pcs. per ctn.- 3' long ea.

“K” STYLE & HALF ROUNDGUTTER GUARDS

Page 581/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

K-Style Gutter Shingle - 20 pcs. per ctn. - 3' long ea.

Metal: Copper Steel Weatherwood

Size Code Price Code Price

5" - 6" K GGSKCP GGSKPC

• Can be Used with 5"K or 6"K Gutter.• Powder Coated Steel Weatherwood can be Used with Steel or Aluminum.

Metal: Mill Finished Aluminum Copper Galvanized

Size Code Price Code Price Code Price

5"K GG5KDI GG5KCDI GG5KGDI

6"K GG6KDI GG6KCDI GG6KGDI

K-Style Hinged Gutter Guard - Aluminum & Galv. Steel 75 pcs. per ctn. -Painted Galv. Steel 50 pcs. per ctn. - Copper 25 pcs. per ctn. - 3' long ea.

Metal: Mill Finished Aluminum Copper Galvanized Steel Painted Galvanized Steel

Size Code Price Code Price Code Price Code Price

5"K GGAK-5 GGCK-5 GGGLK5 GGPC__6

6"K GGAK-6 GGCK-6 GGGLK6 GGPC__6

7"K N/A N/A GGGLK7 N/A

• Painted Galvanized Steel can be Used with 5"K or 6"K Gutter.• Painted Galvanized Steel is Available in White (W), Brown (B) and Black (K).

ENTER COLOR CODE WHEN ORDERING

K-Style Lock-On Gutter Guard - 25 pcs. per ctn. - 4' long ea.

Metal: Painted Galvanized Steel

Size Code Price

5" K GG5KKDI

6"K GG6KKDI

• Painted Galvanized Steel is Available in Black Only.

GUTTER ACCESSORIES

“K” STYLE & HALF ROUNDGUTTER GUARDS

Page 591/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

K-Style NoLeaf™ Gutter Cover - 25 pcs. per ctn. - 4' long ea.

Metal: .024 Gauge Aluminum

Size Code Price

One Size MNL__ __ __

• Installs on New or Existing K-Style Gutter Systems.• Stock Colors are Available in Almond (AL), Clay (CL), Cream (CR), Linen (LI), Royal Brown (RB), and White (WH).• Special Order Colors are Available in Beaver Brown (BB), Black (BL), Buckskin Brown (BU), Terra Bronze (BZ), CB Grey (CBG),

Bronze (FBZ), Grecian Green (GG), Herringbone (HE), Ivory (IV), Musket Brown (MB), Pearl Gray (PG), Tuxedo Grey (TG) andWicker (WI).

• Special Order Colors may Require Extended Lead Time of at Least 2 Weeks. Special Orders are Not Subject to Cancellation orReturn.

ENTER COLOR CODE WHEN ORDERING

K-Style Diamond Shaped Snap-In Plastic Gutter Cover with Mesh Backing- 50 pcs. per ctn. - 3' long ea.

Metal: PVC

Size Code Price

5" - 6" K PVCSI6__

• Can be Used with 5"K or 6"K Gutter.• PVC is Available in White (W), Brown (B) and Black (K).

ENTER COLOR CODE WHEN ORDERING

K-Style Solid Snap-In Plastic Gutter Cover - 25 pcs. per ctn. - 4' long ea.

Metal: PVC

Size Code Price

5" - 6" K SPGC6K__4

• Can be Used with 5"K or 6"K Gutter.• PVC is Available in White (W) and Clay (C).

ENTER COLOR CODE WHEN ORDERING

NoLeaf™ Gutter Guard Bracket - 50 pcs. per ctn.

Metal: Mill Finished Aluminum

Size Code Price

One Size MNLB

• Use 2 Brackets per 4' Piece• PVC is Available in White (W) and Clay (C).

ENTER COLOR CODE WHEN ORDERING

GUTT

ER A

CCES

SORI

ES

Half Round Hinged Gutter Guard - Aluminum 50 pcs. per ctn. -Copper 25 pcs. per ctn. - 3' long ea.Metal: Mill Finished Aluminum Copper

Size Code Price Code Price

5" HR GGAR-5 GGCR-5

6" HR GGAR-6 GGCR-6

Splash BlocksGreen Brown Gray

Code Price Code Price Code Price

SBGN06 SBBR07 SBGR34

Flex-A-Spout - 12 pcs. per ctn.• Available in Brown (BR), Green (GR) and White (WH).• Sold in Full Box Quantities Only.

ENTER COLOR CODE WHEN ORDERING

Brown Green White

Code Price Code Price Code Price

FLXSBR FLXSGR FLXSWH

“K” STYLE & HALF ROUNDGUTTER GUARDS

Page 601/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

GUTTER ACCESSORIES

Step FlashingSize/Description Metal/Color Pcs. Per Box Code Price

2.5" x 2.5" x 7" Pre-Bent Brown Aluminum 500 SFB227

2" x 3" x 7" Pre-Bent Brown Aluminum 500 SFB237

3" x 3" x 8" Pre-Bent Brown Aluminum 500 SFB338

3" x 4" x 7" Pre-Bent Brown Aluminum 500 SFB347

3" x 5" x 8" Pre-Bent Brown Aluminum 500 SFB358

5" x 5" x 7" Pre-Bent Brown Aluminum 250 SFB557

5" x 5" x 8" Pre-Bent Brown Aluminum 250 SFB558

3" x 5" x 8" Pre-Bent .019 Brown Aluminum 250 SF9B358

3" x 5" x 12" Pre-Bent .019 Brown Aluminum 250 SF9B352

2.5" x 2.5" x 7" Pre-Bent Black Aluminum 500 SFK227

2" x 3" x 7" Pre-Bent Black Aluminum 500 SFK237

3" x 3" x 8" Pre-Bent Black Aluminum 500 SFK338

3" x 4" x 7" Pre-Bent Black Aluminum 500 SFK347

5" x 5" x 7" Pre-Bent Black Aluminum 250 SFK557

5" x 5" x 8" Pre-Bent Black Aluminum 250 SFK558

6" x 6" x 12" Pre-Bent Black Aluminum 250 SFK662

3" x 5" x 8" Pre-Bent .019 Black Aluminum 250 SF9K358

3" x 5" x 12" Pre-Bent .019 Black Aluminum 250 SF9K352

2.5" x 2.5" x 7" Pre-Bent Mill Finished Aluminum 500 SFM227

2" x 3" x 7" Pre-Bent Mill Finished Aluminum 500 SFM237

3" x 3" x 8" Pre-Bent Mill Finished Aluminum 500 SFM338

3" x 4" x 7" Pre-Bent Mill Finished Aluminum 500 SFM347

4" x 4" x 8" Pre-Bent Mill Finished Aluminum 250 SFM448

5" x 5" x 7" Pre-Bent Mill Finished Aluminum 250 SFM557

5" x 5" x 8" Pre-Bent Mill Finished Aluminum 250 SFM558

6" x 6" x 12" Pre-Bent Mill Finished Aluminum 250 SFM662

5" x 7" Flat Mill Finished Aluminum 500 STFLMF

6" x 8" Flat Mill Finished Aluminum 500 STMF68

7" x 10" Flat Mill Finshed Aluminum 500 SFM710

8" x 10" Flat Mill Finished Aluminum 500 SFM810

5" x 7" Flat Black/Brown Aluminum 500 STFLBB

6" x 8" Flat Black/Brown Aluminum 500 STBB68

2.5" x 2.5" x 7" Pre-Bent 16 Oz. Copper 100 SFC227

2" x 3" x 7" Pre-Bent 16 Oz. Copper 100 SFC237

5" x 5" x 8" Pre-Bent 16 Oz. Copper 50 SFC558

5" x 7" Flat 16 Oz. Copper 100 STFLCP

2" x 3" x 7" Pre-Bent 30 Ga. Galv. Steel 100 SFG237

STEP FLASHING

Page 611/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ROOF

EDG

ING

AND

TRIM

Painted Aluminum - 500'/ctn.

Gauge Code Price

.019 B45__ __B

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

B4 1/2 Roof Edge• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn. Copper - 200'/ctn.

Gauge Code Price Gauge Code Price

.019 CS4__ __B 16 oz. CS4CPB

.0125 CS4__ __2

CS4 Drip Edge• .019 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).• .0125 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

C3 Drip Edge• .019 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).• .0125 Aluminum is Available in White (WA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

BS4 1/2 Roof Edge• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 500'/ctn.

Gauge Code Price

.019 BS45__ __

ROOF EDGING AND TRIM

Page 621/07

Aluminum - 500'/ctn.

Gauge Code Price

.019 C-3__ __B

.0125 C-3__ __2

A5 Drip Edge• .0125 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn.

Gauge Code Price

.0125 A-5__ __2

A5

B4 1/2

BS4 1/2

C3

CS4

ROOF EDGING AND TRIM

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Aluminum - 500'/ctn. Copper - 200'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.024 C45__24 16 oz. C45CPB 28 ga. C45GLB 26 ga. C45__ __B

.019 C45__ __B

.016 C45__ __6

.0125 C45WA2

C4 1/2 Drip Edge• .024 Aluminum is Available in White (W) and Requires a 2 Week Lead Time.• .024 Aluminum is 250'/ctn.• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Musket Brown (MB) and Mill Finished (MF).• .016 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).• .0125 Aluminum is Available in White Only.• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).ENTER COLOR CODE WHEN ORDERING

ROOF EDGING AND TRIM

Page 631/07

Aluminum - 500'/ctn. Copper - 200'/ctn.

Gauge Code Price Gauge Code Price

.024 C35__24 16 oz. C35CPB

.019 C35__ __B

.016 C35__ __6

.0125 C35WA2

C3 1/2 Drip Edge• .024 Aluminum is Available in White (W) and Royal Brown (B) and Requires a 2 Week Lead Time.• .024 Aluminum is 250'/ctn.• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Ivory (IA).• .016 Aluminum is Available in White (WA) and Royal Brown (BA).• .0125 Aluminum is Available in White Only.ENTER COLOR CODE WHEN ORDERING

C3 1/2

C4 1/2

Aluminum - 500'/ctn.

Gauge Code Price

.0215 C-5__ __2

C5 Drip Edge• .0215 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

C5

Copper - 200'/ctn. Galvanized Steel - 200'/ctn.

Gauge Code Price Gauge Code Price

16 oz. C-4CPBD 26 ga. G90 C-4G90

C4 Drip Edge• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.

C4

ROOF

EDG

ING

AND

TRIM

Painted Aluminum - 250'/ctn.

Gauge Code Price

.032 C-93WA

C9 Drip Edge• .032 Painted Aluminum is Available in White Only.• Requires a 2 Week Lead Time.

ROOF EDGING AND TRIM

Page 641/07

Aluminum - 250'/ctn. Copper - 100'/ctn. Galvanized Steel Painted Galv. Steel - 100'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.032 C-63__ __ 16 oz. C-6CPB 28 ga. C-6GLB 26 ga. C-6__ __B

26 ga. G90 C-6G90

C6 Drip Edge• .032 Aluminum is Available in White (WB), Royal Brown (BA), Dark Bronze (DZ) and Mill Finished (MF).• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Bronze (BZ).• 28 Gauge Galvanized Steel is 100'/ctn and 26 Gauge Galvanized Steel is 200'/ctn.• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 250'/ctn.

Gauge Code Price

.032 C-73__ __

C7 Drip Edge• .032 Painted Aluminum is Available in White (WB), Royal Brown (BA) and Dark Bronze (DB).

ENTER COLOR CODE WHEN ORDERING

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

C6

C7

C9

Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.032 C55__3B 16 oz. C55CPB 28 ga. C55GLB 26 ga. C55__ __B

.024 C55__24

.019 C55__ __B

.016 C55__ __6

.0125 C55__ __2

C5 1/2 Drip Edge• .032 Aluminum and .024 Aluminum are Available in White (W) and Royal Brown (B) and Require a 2 Week Lead Time.• .032 Aluminum and .024 Aluminum are 250'/ctn.• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF).• .016 Aluminum and .0125 Aluminum are Available in White (WA) and Royal Brown (BA).• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).ENTER COLOR CODE WHEN ORDERING

C5 1/2

ROOF EDGING AND TRIM

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

E3 Roofers Angle• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• .016 Painted Aluminum is Available in White Only.

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 500'/ctn.

Gauge Code Price

.019 E-3__ __B

.016 E-3WA6

ROOF EDGING AND TRIM

Page 651/07

E4 Roofers Angle

Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel

Gauge Code Price Gauge Code Price Gauge Code Price

.019 E-4__ __B 16 oz. E-4CPB 28 ga. E-4GLB

.016 E-4__ __6

E6 Roofers Angle• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• 26 Gauge Painted Galvanized Steel is Available in White Only.

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 500'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price

.019 E-6__ __B 28 ga. E-6GLB 26 ga. E-6WSB

.016 E-6__ __6

• .019 Aluminum is Available in White (WA), Royal Brown (BA) and Mill Finished (MF).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• 28 Gauge Galvanized Steel is 250'/ctn and 26 Gauge Galvanized Steel is 200'/ctn

ENTER COLOR CODE WHEN ORDERING

E6

E3

E4

D3 and D4 Rake Edge• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 500'/ctn.

Gauge Code Price

D3

.019 D-3__ __B

D4

.019 D-4__ __B

D3

D4

ROOF

EDG

ING

AND

TRIM

Painted Aluminum - 500'/ctn.

Gauge Code Price

.014 FS45__4

.0125 FS45__2

FSN4 1/2 High Tensile Drip Edge• .014 Painted Aluminum is Available in White (W), Royal Brown (B) and Black (K).• .0125 Painted Aluminum is Available in White (W) and Brown (B).

ENTER COLOR CODE WHEN ORDERING

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

F4 1/2 Drip Edge• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Clay (CL), Musket Brown (MB), Ivory (IA) and

Mill Finished (MF).• .016 Painted Aluminum and .0125 Painted Aluminum are Available in White (WA) and Royal Brown (BA).• Painted Galvanized Steel is Available in White (W), Brown (B) and Black (K).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn. Copper - 200'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.019 F45__ __B 16 oz. F45CPB 30 ga. F45GS3AX 30 ga. F45__S3AX

.016 F45__ __6

.0125 F45__ __2

ROOF EDGING AND TRIM

Page 661/07

F4 1/2

FSN 4 1/2

E8 Roofers Angle• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• 26 Gauge Painted Galvanized Steel is Available in White Only.

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 250'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 100'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price

.019 E-8__ __B 28 ga. E-8GLB 26 ga. E-8WSB

E8

ROOF EDGING AND TRIM

E9 Roofers Angle• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.

Copper - 200'/ctn. Galvanized Steel - 200'/ctn.

Gauge Code Price Gauge Code Price

16 oz. E-9CPBD 26 ga. G90 E-9G90

E9

F5 Drip Edge• .024 Painted Aluminum is Available in White (W) and Brown (B).• .024 Aluminum is 250'/ctn.• .019 Aluminum is Available in White (WA), Royal Brown (BA), Black (BK), Clay (CL), Musket Brown (MB), Ivory (IA) and

Mill Finished (MF).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.024 F-5__24 16 oz. F-5CPB 28 ga. F-5GLB 26 ga. F-5__ __B

.019 F-5__ __B

.016 F-5__ __6

F5

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ROOF EDGING AND TRIM

Page 671/07

ROOF

EDG

ING

AND

TRIM

F5 Open Drip Edge• .019 Aluminum and .0125 Aluminum are Available in White (WA), Royal Brown (BA) and Mill Finished (MF).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn. Copper - 150'/ctn.

Gauge Code Price Gauge Code Price

.019 F5O__ __B 16 oz. F5OCPB

.016 F5O__ __6

.0125 F5O__ __2

F5M (Medium) Drip Edge• .019 Aluminum is Available in White (WA), Royal Brown (BA), Clay (CL), Musket Brown (MB), Ivory (IA) and Mill Finished (MF).• .016 Painted Aluminum is Available in White (WA), Clay (CL) and Royal Brown (BA).• .013 and .011 Painted Galvanized Steel are Available in White (W) and Brown (B).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel - 250'/ctn. Painted Galv. Steel - 250'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.019 F5M__ __B 16 oz. F5MCPB 28 ga. F5MGLB .013 F5M__13

.016 F5M__ __6 .011 F5M__11

F5

F5M

FR5 Drip Edge• .019 Painted Aluminum is Available in White (WA), Royal Brown (BA) and Black (BK).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 500'/ctn. Galvanized Steel - 200'/ctn.

Gauge Code Price Gauge Code Price

.019 FR5__ __B 28 ga. FR5GLB

.016 FR5__ __6

F8 Drip Edge• .024 Painted Aluminum is Available in White Only.• .019 Aluminum and .0125 Aluminum are Available in White (WA), Royal Brown (BA), Mill Finished (MF) and Black (BK).• 30 Gauge Painted Galvanized Steel is Available in White Only.

ENTER COLOR CODE WHEN ORDERING

Aluminum - 250'/ctn. Copper - 100'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.024 F-8W24 16 oz. F-8CPB 30 ga. F-83GL 30 ga. F-83WS

.019 F-8__ __B

.0125 F-8__ __2

F8

FR5

ROOF EDGING AND TRIM

Page 681/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

F5 1/2 Open Drip Edge• .019 Aluminum is Available in White (WB), Royal Brown (BB) and Mill Finished (MF).• .016 Painted Aluminum and .0125 Painted Aluminum are Available in White (W) and Royal Brown (B).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 500'/ctn.

Gauge Code Price

.019 F55O__ __

.016 F55O__6

.0125 F55O__2

F5 1/2

FR4 1/2 Drip Edge• .019 Painted Aluminum and .016 Painted Aluminum are Available in White Only.

ENTER COLOR CODE WHEN ORDERING

Painted Aluminum - 500'/ctn.

Gauge Code Price

.019 FR45WB

.016 FR45W6

FR4 1/2

ROOF EDGING AND TRIM

Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.019 H55__ __B 16 oz. H55CPB 28 ga. H55GLB 26 ga. H55__ __B

.016 H55__ __6

H5 1/2 Slag Stop• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).

ENTER COLOR CODE WHEN ORDERING

H5 1/2

ROOF EDGING AND TRIM

Page 691/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

ROOF

EDG

ING

AND

TRIM

Aluminum - 500'/ctn. Copper - 150'/ctn. Galvanized Steel - 200'/ctn. Painted Galv. Steel - 200'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price Gauge Code Price

.032 H6F__3B 16 oz. H6FCPB 28 ga. H6FGLB 26 ga. H6F__ __B

.024 H6FW24

.019 H6F__ __B

.016 H6F__ __6

H6F Slag Stop• .032 Aluminum is Available in White (W), Royal Brown (B), Dark Bronze (D) and Mill Finished (M).• .032 Aluminum and .024 Aluminum are 250'/ctn.• .024 Painted Aluminum is Available in White Only.• .019 Aluminum is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Mill Finished (MF).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).• 26 Gauge Painted Galvanized Steel is Available in White (WS) and Brown (BS).

ENTER COLOR CODE WHEN ORDERING

H7 Slag Stop• .032 Aluminum is Available in High Gloss White (HG), Royal Brown (BR), Dark Bronze (DB) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 250'/ctn.

Gauge Code Price

.032 H-73__ __

H7

H6F

Vented Drip Edge - 5.0 Sq. In. of Net Free Area per Linear Ft.• .027 Aluminum is Available in High Gloss White (HG), Royal Brown (BR) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

Aluminum - 200'/ctn. Copper - 200'/ctn.

Gauge Code Price Gauge Code Price

.027 VDE-__ __ 16 oz. VDE-CP

Vented

DC1, DC2, DC3, DCW 3/4, DCW 1 1/8, and DCW 1 5/16 Drip Cap• Painted Aluminum is Available in White Only.

Painted Aluminum

Gauge Code Price

DC1 - 500'/ctn.

.0125 DC1WA2

DC2 - 1000'/ctn.

.0125 DC2WA2

DC3 - 1000'/ctn.

.0125 DC3WA2

DCW 3/4 - 1000'/ctn.

.0125 DCWW34

DCW 1 1/8 - 1000'/ctn.

.0125 DCWW18

DCW 1 5/16 - 1000'/ctn.

.0125 DCWW56

DC1

DC2

DC3

DCW 1 1/8

DCW 3/4

DCW 1 5/16

Painted Aluminum - 500'/ctn.

Gauge Code Price

.019 ODLR__ __

ODLR Drip Edge• .019 Painted Aluminum is Available in White (WA) and Royal Brown (BA), Clay (CL), Black (BK), Desert Tan (DT), Ivory (IA),

Light Bronze (LB), Musket Brown (MB), Prairie Sand (PS) and Sandstone Beige (SB).

ENTER COLOR CODE WHEN ORDERINGODLR

ROOF EDGING AND TRIM

Page 701/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Painted Aluminum - 500'/ctn. Copper - 150'/ctn.

Gauge Code Price Gauge Code Price

.019 ODE-__ __ 16 oz. ODE-CP

.016 ODE__ __6

ODE Overhanging Drip Edge• .019 Painted Aluminum is Available in White (WA), Royal Brown (BA), Dark Bronze (DB), Black (BK) and Clay (CL).• .016 Painted Aluminum is Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERINGODE

ROOF EDGING AND TRIM

Aluminum - 200'/ctn. Copper - 100'/ctn. Galvanized Steel - 100'/ctn.

Gauge Code Price Gauge Code Price Gauge Code Price

.019 RRO__ __2 16 oz. RROCP2 28 ga. RRO282

2" Round Ridge Roll• Aluminum is Available in White (WA), Brown (BA) and Mill Finished (MF).

ENTER COLOR CODE WHEN ORDERING

ROOF EDGING AND TRIM

Page 711/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Deck Ledger Flashing Cap - 40 pcs./ctn.

Plastic - 320'/ctn.

Color Code Price

Gray DLPGR8

• Fits Over Ledger Board and Behind Siding to Protect from Water Damage.

ROOF

EDG

ING

AND

TRIM

“W” Valley - 10' Lengths

.019 Painted Aluminum 16 Oz. Copper 26 Gauge Galvanized Steel 26 Gauge G90 Galv. Steel

Size Code Price Size Code Price Size Code Price Size Code Price

18” WF__ __18 18” WFCP18 18” WF2618 18" WFG9018

24” N/A 24” WFCP24 24” N/A 24" WFG9024

• .019 Painted Aluminum is Available in Black (BK) and Brown (9B).• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.

ENTER COLOR CODE WHEN ORDERINGW

.032 Painted Aluminum Mill Finished Aluminum 16 Oz. Copper 26 Gauge Galvanized Steel

Size Price Code Size Code Price Size Code Price Size Code Price

18" V1__318 18" V1MF18 18" V1CP18 18" V__2618

“V” Valley• .032 Painted Aluminum is Available in Brown (B) and Black (K).• Copper is Available in 10' Lengths Only.• Mill Finished Aluminum and Galvanized Steel is Available in Various Lengths - 10' (1) and 8' (8).

ENTER LENGTH/COLOR WHEN ORDERINGV

ROOF EDGING AND TRIM

Page 721/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

CornerFlex® Flashing - 20 pcs./ctn.

Mill Finished Aluminum

Gauge Code Price

.012 FCF-MF

• Sold in Full Box Quantities Only.

Left Diverter Right Diverter

Code Price Code Price

KOL__ KOR__

Polypropylene Kick-Out Diverters - 30 pcs./ctn.• Durable polypropylene copolymers with UV & heat stabilizers.• Available in Brown (B), Grey (G), Tan (T) and White (W).• Patented design creates downward and outward water flow away from walls.• Helps prevent water intrusion at roof to wall intersections.• Easy to install & works with all leading roofing & wall cladding systems.

ENTER LENGTH/COLOR WHEN ORDERING

ROOF EDGING AND TRIM

Left Diverter Right Diverter

Code Price Code Price

KOLCP KORCP

Copper Kick-Out Diverter - 5 pcs./ctn.• Available in 16 Oz. Copper.

Brick Molding• Painted Aluminum is Available in White Only.

Painted Aluminum - 250'/ctn.

Gauge Code Price

.019 BMCWA9

Page 731/07

12" TRAPLOK .019 Aluminum Soffit -120'/ctn. 1.2 sqs./ctn. 10 pcs./ctn. 12' per piece3.5 In2 Net Free Area/Ft2

• Available in White (WA), Royal Brown (BA) and Dark Bronze (DB).

ENTER COLOR CODE WHEN ORDERING

TRAPLOK SYSTEM:

SOLID (NON-VENTILATED) VENTILATED

Code Price Code Price

SV12__ __ LV12__ __

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

10" QLOK .019 Aluminum Soffit -120'/ctn. 1 sq./ctn. 10 pcs./ctn. 12' per piece9.6 In2 Net Free Area/Ft2

• Available in White (WA), Royal Brown (BA), Dark Bronze (DB), and Clay (CL).

ENTER COLOR CODE WHEN ORDERING

15" QLOK .019 Aluminum Soffit -120'/ctn. 1.5 sqs./ctn. 10 pcs./ctn. 12' per piece4.8 In2 Net Free Area/Ft2

• Available in White (WA) and Royal Brown (BA).

ENTER COLOR CODE WHEN ORDERING

QLOK SYSTEM:

QLOK SYSTEM:

SOLID (NON-VENTILATED) VENTILATED

Code Price Code Price

QS10__ __ QV10__ __

SOLID (NON-VENTILATED) VENTILATED

Code Price Code Price

QS15__ __ QV15__ __

ALUMINUM SOFFIT &ACCESSORIES

12" PRO LOCK V-Groove 16 Oz. Copper Soffit -Custom Lengths 8.8 In2 Net Free Area/Ft2

Berger will manufacture our Copper Soffit to size for your job. This product is notfor use as vertical siding and cannot be run in lengths longer than 24 inches unlessspecifically engineered and quoted for the job. Please call for availability.• This is a Non-Stock Item and may Require Extended Lead Time.

PRO LOCK SYSTEM:

SOLID (NON-VENTILATED) VENTILATED

Code Price Code Price

SS12C2 SV12C2

PRODUCT INFORMATION:• QLOK style is recommended for use in coastal or windy environments.• Attachment of soffit requires nailing on 12" centers when used in areas subjected to wind uplift and vibration.• Short soffit overhangs of 16" or less require at least 1 nail per piece central of the hem.

SOFF

IT A

ND V

ENTI

LATI

ON P

RODU

CTS

SOFFIT AND VENTILATION PRODUCTS

AccuVent™ Soffit Insulation Baffler - 50 pcs./bundle - 56 bundles/skid• AccuVent is 22.5" x 41" and Fits Any Size Roof or Truss• Installs with Six Staples• Perforated for Adjusted Roof Truss Spacing

100% Recycled PVC

Code Price

ACCUVENT

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

.024 Aluminum Fascia - 300'/ctn. 25 pcs./ctn.• 4" Fascia is Available in White (WA) and Royal Brown (BA).• 6" Fascia is Available in White (WA), Royal Brown (BA), Musket Brown (MB) and Clay (CL).• 8" Fascia is Available in White (WA), Clay (CL) and Royal Brown (BA).• 10" Fascia is Available in White (WA), Royal Brown (BA) and Dark Bronze (DB).

ENTER COLOR CODE WHEN ORDERING

4" 6" 8" 10"

Code Price Code Price Code Price Code Price

FAS4__ __ FAS6__ __ FAS8__ __ FAS1__ __

.019 Aluminum 1/2 “F” Channel - 300'/ctn. 25 pcs./ctn.• Painted Aluminum is Available in White (-W), Brown (-B), Clay (CL), Dark Bronze (DB) and Light Bronze (LB).

ENTER COLOR CODE WHEN ORDERING

Code Price

FA50__ __

ALUMINUM SOFFIT &ACCESSORIES

Page 741/07

.019 Aluminum Fascia - 300'/ctn. 25 pcs./ctn.• 6" Fascia is Available in White (WA), Desert Tan (DT), Granite Gray (GR), Ivy Green (IG), Light Bronze (LB), Natural Clay (NC),

Prairie Sand (PS) and Sandstone Beige (SB).

ENTER COLOR CODE WHEN ORDERING

6"

Code Price

FA96__ __

.019 Aluminum 1/2 “J” Channel - 600'/ctn. 50 pcs./ctn.• Painted Aluminum is Available in White (-W) and Royal Brown (-B).

ENTER COLOR CODE WHEN ORDERING

Code Price

JA50__ __

.019 Aluminum 1/2 Economy “J” Channel - 600'/ctn. 50 pcs./ctn.• Painted Aluminum is Available in White (EW), Brown (BA), Clay (CL), Dark Bronze (DB), Desert Tan (DT), SandstoneBeige (SB) and 16 Oz. Copper (CP).

ENTER COLOR CODE WHEN ORDERING

Code Price

JA50__ __

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Starter Strip - Aluminum 500 ft. per ctn. - Galvanized Steel 250 ft. per ctn.

Aluminum Soffit Cove Moulding - 25 per ctn. - 300 ft. per ctn.• Painted Aluminum is Available in White (W) and Royal Brown (B) and is .019.

Code Price

RCM__12

Aluminum - 10' Galvanized Steel - 10'

Code Price Code Price

ALSS10 GLSS10

ALUMINUM SOFFIT &ACCESSORIES

Page 751/07

.019 Aluminum 3/4 “J” Channel - 600 ft. per ctn.• Painted Aluminum is Available in White Only.

Code Price

J-34WA

Aluminum Utility Trim - 600 ft. per ctn.

Code Price

UT19WA

• Painted Aluminum is Available in White Only.

• Galvanized Steel Starter Strip Does Not have Nail Holes or Slots

Pro-Master Ridge Vent™• Nails Included - Both Hand and Power

ROLL LENGTH DIMENSION CODE PRICE20' roll 10 1/2" x 3/4" x 20' PMRV2050' roll 10 1/2" x 3/4" x 50' PMRV50

Starter Strip - Aluminum 394 ft. per ctn. - 10' Galvanized Steel 250 ft. per ctn. -118" Galvanized Steel 197 ft. per ctn.

Aluminum - 118" Galvanized Steel - 10' Galvanized Steel - 118"

Code Price Code Price Code Price

ALS118 GLSS10N GSS118

• 10' Galvanized Steel Starter Strip Has Nail Holes or Slots

SOFF

IT A

ND V

ENTI

LATI

ON P

RODU

CTS

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

DRYSNAP™ - UNDER DECKRAIN CARRYING SYSTEM

Page 761/07

DrySnap™ - Under Deck Rain Carrying System• Maximize Your Outdoor Living Space• Vinyl Ceiling Panels Collect and Drain Water to Provide a Dry Space• Provides a Maintenance Free Ceiling that Covers the Unsightly

Underside of Your Deck• Easy Snap-Together Installation Under Any Raised Deck• All Weather Protection• 10 Year Limited Warranty

12' Starter Piece 16' Starter Piece

Code Price Code Price

37320 37321

Starter Piece - 12 pcs. per ctn.

12' Vinyl Panel 16' Vinyl Panel

Code Price Code Price

37325 37324

Vinyl Panel - 12' - 12 pcs. per ctn. 16' - 9 pcs. per ctn.

2" x 24"

Code Price

100S-RH

Joist Bracket - 36 pcs. per ctn.

1/4" x 2" x 2"

Code Price

37351

Pitch Spacers - 32 pcs. per bag / 384 pcs. per ctn.

12' Trim Cap

Code Price

37331

Trim Cap - 14 pcs. per ctn.

Stainless Steel Deck Screws - 50 pcs. per pack2 1/2" Screws 3" Screws

Code Price Code Price

84178 84179

6 1/2" Screws & Ferrule

Code Price

84181

Gutter Screws & Ferrule (for Hanging Gutter) - 10 pcs. per ctn.

For FREE DrySnap Job Material Estimates or Technical Questions, Please Call Berger at (800) 523-8852.

DRYSNAP™ UNDER DECK RAIN CARRYING SYSTEM

Standard .027 and .032 Aluminum Gutter CoilSOLD IN SKID QUANTITIES ONLY. 3 Rolls per skid. Approximate Weight: 375 lbs. per roll• Available in High Gloss White, Low Gloss White and Royal Brown.

Standard .019 PVC Coated Aluminum Trim Coil Colors - 50' RollsSOLD IN CARTON QUANTITIES ONLY.• All .019 PVC Coated Aluminum Trim Coil has a wash coat on reverse side of coil.

WIDTH COLOR DESCRIPTION CODE PRICE

24" White 500-2424" Musket Brown 501-24

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

Standard .019 Aluminum Trim Coil Colors - 50' RollsSOLD IN CARTON QUANTITIES ONLY.• 12" Width = 2 Rolls per ctn.• 14" and 24" Widths = 1 Roll per ctn.

Special .019 Aluminum Trim Coil Colors - 50' Rolls - 1 Roll per ctn.SOLD IN CARTON QUANTITIES ONLY.

WIDTH COLOR DESCRIPTION CODE PRICE

14" Black / Lomar White 200-1424" Black / Lomar White 200-247" Black / Royal Brown 202-0714" Black / Royal Brown 202-1424" Black / Royal Brown 202-2424" Light Bronze / Dark Bronze 800-2424" Dark Bronze / Lomar White 801-2412" Lomar White / Lomar White 100-1214" Lomar White / Lomar White 100-1424" Lomar White / Lomar White 100-2424" Musket Brown / Lomar White 700-2414" Royal Brown / Lomar White 201-1424" Royal Brown / Lomar White 201-2424" Black / Black 204-2424" Terratone Bronze / Lomar White 803-24

WIDTH COLOR DESCRIPTION CODE PRICE

24" Ivory / Lomar White 105-2424" Barn Red / Lomar White CBR-2424" Window White / Window White NBW-2424" Clay / Lomar White BCL-2424" Desert Tan / Snow White DT-2424" Pewter Grey / Lomar White PG-2424" Grecian Green / Lomar White 203-2424" Prairie Sand / Lomar White CPS-24

WIDTH COLOR DESCRIPTION CODE PRICE

24" Snow White / Snow White SW-2424" Wolverine Almond / Lomar White 452-2424" Sandstone Beige / Lomar White SB-2424" Cream / 280 White CRM-2424" Ivy Green / 280 White IG-2424" Granite Grey / Lomar White GG-2424" Herringbone / 280 White HB-24

COIL PRODUCTS

Page 771/07

COIL

PRO

DUCT

S

Follansbee Seamless Virotin Terne II - 50’ Rolls

SIZE CODE PRICE14" girth IC401420" girth IC402024" girth IC402428" girth IC4028

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

COIL PRODUCTS

Page 781/07

• Virotin is Carbon Steel Coated with a Two Phase Zinc / Tin Alloy.• 28 Gauge Available in Full Skids Only.• Rolls are Coated Both Sides.• All Terne Coated Rolls are Considered a Special Order may Require Extended Lead Time of at Least 2 Weeks. Special Orders

are Not Subject to Cancellation or Return.

Mill Finished Aluminum Versa Valley Flashing - 50' RollsSIZE CODE PRICE

4" MFVR046" MFVR068" MFVR0810" MFVR1012" MFVR1214" MFVR1416" MFVR1618" MFVR1820" MFVR2024" MFVR24

Mill Finished Aluminum Economy Valley Flashing - 50' RollsSIZE CODE PRICE

6" MFEV068" MFEV0810" MFEV1012" MFEV1214" MFEV1416" MFEV1620" MFEV2024" MFEV24

Gauge .009 - Economy

Gauge .0078 - Versa

COIL PRODUCTS

Copper Gutter Coil - 1 Roll per Skid - Approx. 500 lbs. per Roll

SIZE CODE PRICE11 3/4" girth, 5K GC6CP117511 7/8" girth, 5K GC6CP11875

15" girth, 6K GC6CP15

• Copper is 16 Oz. and is Sold in Full Skids Only.

Mill Finished Aluminum Standard Valley Flashing - 50' RollsSIZE CODE PRICE

4" MFST046" MFST068" MFST0810" MFST1012" MFST1214" MFST1416" MFST1618" MFST1820" MFST2024" MFST24

Gauge .014 - Standard

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

COIL PRODUCTS

Page 791/07

Galvanized Steel Standard Valley Flashing - 50' RollsSIZE CODE PRICE

6" GLST068" GLST0810" GLST1012" GLST1214" GLST1416" GLST1618" GLST1820" GLST2024" GLST2428" GLST28

Mill Finished Aluminum Commercial Valley Flashing - 50' RollsSIZE CODE PRICE14" MFCM1420" MFCM20

Gauge .0167 - Commercial

30 Gauge - Standard

Galvanized Steel G90 Valley Flashing - 50' Rolls

SIZE CODE PRICE16" VGL-1618" VGL-1820" VGL-20

26 Gauge - G90

• 18" and 20" Premium Valley Flashings are Considered a Special Order may Require Extended Lead Time of at Least 2 Weeks.Special Orders are Not Subject to Cancellation or Return.

• 26 Gauge G90 Galvanized Steel MEETS FLORIDA BUILDING CODE.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

COIL PRODUCTS

Page 801/07

Metal Bender Tool with 3 1/2" Blade - 12 pcs./ctn.

Code Price

M-BEND

• Die Cast Aluminum.

7" & 10" Blades for Metal Bender Tool - 12 cards/ctn.Code Price

710-BLA

16 Oz. Cold Rolled Copper SheetsSOLD IN SKID QUANTITIES ONLY. 3' x 8' Sheets have 80 Sheets/Skid or approx. 1920 lbs.. 3' x 10' Sheets have 65Sheets/Skid or approx. 2000 lbs..

SIZE CODE PRICE3' x 8' PS1696

3' x 10' PS16CP

COIL PRODUCTS

SIZE CODE PRICE APPROX. LENGTH12" CPEV12 100'16" CPEV16 75'20" CPEV20 60'24" CPEV24 50'

16 Oz. Soft Copper Economy Valley Flashing Rolls - 100 lb. Rolls• 12" and 16" are Considered a Special Order and may Require Extended Lead Time of at Least 2 Weeks. Special Orders are Not

Subject to Cancellation or Return.

TECHNICAL REFERENCEAPPENDIX

Page A11/07

1. Metal Specifications A2

a. Specifications for Coil & Sheet Metal Goods Used A2In The Production of Gutter & Downspout

2. General Roof Drainage System Information A3-A11

a. Proper Gutter and Downspout Sizing A3-A11

b. Gutter Hanger Selection A10

c. Recommended Gutter Hanger Spacing A10

d. Recommended Gutter Position A10

e. Lap Joint Specification A10

f. Typical Gutter Hanger Details A11

3. Related Technical Information A12-A15

a. Galvanic Corrosion A12

b. Expansion of Metals Used for Roof Drainage Systems A13

c. Basic Soldering Terms and Techniques A13-A15

d. Storage and Handling of Product A15

e. Patina Chemical Sources A16

The information included in this Appendix has been derived from The SMACNA Architectural Sheet Metal Manual 5th Edition and the AIA Architectural Graphic Standards6th Edition. For full copies of these industry manuals please contact:

Sheet Metal and Air Conditioning Contractors National Association, Inc. (SMACNA) The American Institute of Architects (AIA)4201 Lafayette Center Drive, Chantilly, VA 22021 1735 New York Ave., NW, Washington, DC 20006Phone: (703) 803-2980 • Fax: (703) 803-3732 Phone: (800) AIA-3837 • Fax: (202) 626-7547Website: www.smacna.org • E-Mail: [email protected] Website: www.aia.org • E-mail: [email protected]

Berger requires that all materials be evaluated for fitness of use by the user prior to application. Berger will not beresponsible for misapplication of product, incorrect material or defects that were obvious at time of installation;consequential damage, schedule delays, labor and equipment rental. Our warranty is limited to our cost of materialon product determined to be a manufactured defect. Claims for defective material damaged due to snow and/or iceloads are not covered by our warranty unless Berger snow guards have been utilized and installed per our installationinstructions. For further information on proper use of these products please review this Technical Reference Appen-dix, the SMACNA Architectural Sheet Metal Manual 5th Edition or the AIA Architectural Graphic Standards 6th Edition.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A21/07

SPECIFICATIONS FOR COIL & SHEET METAL GOODS USEDIN THE PRODUCTION OF GUTTER & DOWNSPOUT

1. AluminumA. Mill Finished Aluminum

i. Metal: ASTM B209 – Temper & Alloy 3105 H14ii. Finish: None

B. Painted Aluminumi. Metal: ASTM B209 – Temper & Alloy 3105 H14ii. Finish: .65 - .70 Mil Thick Polyester Finish

C. Kynar 500® Painted Aluminumi. Metal: ASTM B209 – Temper & Alloy 3003 / 3105 H14ii. Finish: Contact Berger for Technical Data on Kynar 500® Coating

2. SteelA. Galvanized Steel

i. Metal: ASTM A653 – LFQ (Lock Form Quality)ii. Finish: Hot Dipped Galvanized Zinc Coating

B. Paintgrip Galvanized Steeli. Metal: ASTM A653 – LFQ (Lock Form Quality)ii. Finish: Hot Dipped Galvanized Zinc Coating with a Bonderized / Phosphatized Finish

C. Painted Galvanized Steeli. Metal: ASTM A653 – LFQ (Lock Form Quality)ii. Finish: Hot Dipped Galvanized Zinc Coating with a .20 - .30 Mil Thick Epoxy and a .70 - .80 Mil Polyester Finish

D. Stainless Steeli. Metal: 304 Alloyii. Finish: 2B

3. CopperA. Natural Copper

i. Metal: ASTM B370 – CDA110 or CDA 122 Alloy – Cold Rolledii. Finish: None

B. Lead Coated Copperi. Metal: ASTM B101 – Class A Type 1 & Type 2ii. Finish: Lead Coating

C. Revere Freedom Gray® Zinc Coated Copperi. Metal: ASTM B370 – CDA110 or CDA 122 Alloy – Cold Rolledii. Finish: Z – T Alloy (Zinc – Tin)

D. Revere Ever Green® Pre-Patinated Copperi. Metal: ASTM B370 – CDA110 or CDA 122 Alloy – Cold Rolledii. Finish: Artificially Accelerated Crystalline Patina

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A31/07

PROPER GUTTER AND DOWNSPOUT SIZING

RAINFALL INTENSITY - DOWNSPOUT CAPACITY

Rainfall intensity is usually given in inches per hour for afive minute duration or one hour duration based on U.S.Weather Bureau records. Table 1-2 based on recordsthrough 1978, gives five minute intensities for selectedcities. New Orleans, Los Angeles, for example, may have8 in./hr.(203 mm/hr) for a five minute duration yet recordonly 4.8 in. (121 mm) in an hour over a 100 year period.These rates correspond to 0.133 in./min.(3.4 mm/min.)and 0.08 in./min.(2 mm/min.). Local codes may requirethat drainage systems only be designed for the latter. Ittakes 96.15 square feet(8.93 square meters) of surfacewith 1 inch per hour(25 mm/hr) of water to correspondwith 1 gpm (0.063 l/s) flow rate. Downspouts and guttersare sized in relation to rainfall on this basis.

Plumbing codes typically use the vertically projected roofarea for drainage design and they often use a square footallowance per square inch of downspout for 1 in./hr.(25mm/hr) rainfall that varies with diameter, for example, 3in.(76 mm): 911(85); 4 in.(102 mm): 1100 (102); 5in.(127 mm): 1280 (119); 6 in.(152 mm): 1400 (130) and8 in.(203 mm): 1750 (163) sq. ft.(sq. m). Net drainagecapacity from using Table 1-1 and 1-2 should be com-pared with local code requirements.

DOWNSPOUT SIZING

In sizing downspouts, the following considerations apply:

1. Downspouts of less than 7.00 sq in.(4515 sq mm)cross section should not be used except for small areassuch as porches and canopies.

2. The size of the downspout should be constant through-out its length.

3. Downspouts should be constructed with conductorheads every 40 ft(12.2 m) to admit air and preventvacuum.

4. Offset of more than 10 ft(3.0 m) can affect drainagecapacity.

5. The gutter outlet capacity should suit the downspoutcapacity.

6. The downspout size must suit the bottom width of thegutter.

DESIGN OF ROOF DRAINAGE SYSTEMSROOF DRAINAGE

The roof is one of the most essential parts of a building as itprotects occupants, contents, and interior of the structurefrom the elements. Once an architect has determined thekind of roof he intends to use, he must give equal attentionto the design of the roof drainage system.

Factors to be considered in the design of roof drainage sys-tems are the area to be drained, size of gutters, downspouts,outlets, slope of roof, type of building, and appearance.

ROOF AREA TO BE CONSIDERED

The design capacity for a roof drainage system depends onthe quantity of water to be handled. The quantity of water inturn depends on the roof area, slope, and rainfall intensity.

In considering the roof area, it must be remembered thatrain does not necessarily fall vertically and that maximumconditions exist only when rain falls perpendicular to a sur-face. Since the roof area would increase as its pitch increases,then it would not be advisable to use the plan area of a pitchedroof in the calculation of a drainage system.

Experience has taught that use of the true area of a pitchedroof often leads to oversizing of gutters, downspouts, anddrains. To determine the design area for a pitched roof, Table1-1 is used.

* To determine the design area multiply the plan area by the factor in B column

These areas are then divided by the proper factor given inTable 1-2, thus obtaining the required area in square inches(square mm) for each downspout. From Table 1-3 select thedownspout.

TABLE 1-1DESIGN AREAS FOR PITCHED ROOFS

PITCH *Bin./ft. mm/mmLevel to 3 76/305 1.004 to 5 102-127/305 1.056 to 8 152-203/305 1.109 to 11 229-279/305 1.2012 305/305 1.30

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A41/07

PROPER GUTTER AND DOWNSPOUT SIZING

ALABAMA: BirminghamMobile

ALASKA: FairbanksJuneau

ARIZONA: PhoenixTucson

ARKANSAS: BentonvilleLittle Rock

CALIFORNIA: Los AngelesSacramentoSan FranciscoSan Diego

COLORADO: DenverBoulder

CONNECTICUT: HartfordDISTRICT OF COLUMBIAFLORIDA: Jacksonville

MiamiTampa

GEORGIA: AtlantaHAWAII: Honolulu

KahuluiHiloLihue

IDAHO: BoiseILLINOIS: ChicagoINDIANA: IndianapolisIOWA: Des MoinesKANSAS: WichitaKENTUCKY: LouisvilleLOUISIANA: New OrleansMAINE: PortlandMARYLAND: BaltimoreMASSACHUSETTS: BostonMICHIGAN: DetroitMINNESOTA: Minneapolis

TABLE 1-2RAINFALL DATA AND DRAINAGE FACTORS

7.5 191 160 2.30 10.1 256 120 1.78.2 208 150 2.10 10.8 274 110 1.62.1 53 570 8.30 3.8 97 310 4.51.7 43 700 10.10 2.3 57 530 7.605.6 141 220 3.10 8.8 224 140 2.006.1 155 200 2.80 9.1 232 130 1.907.4 187 160 2.30 10.2 259 120 1.707.4 187 160 2.30 10.0 253 120 1.704.9 124 250 3.50 6.7 170 180 2.602.5 64 480 6.90 3.9 100 310 4.402.7 68 450 6.4 3.7 93 330 4.702.2 57 540 7.80 3.1 78 390 5.605.7 146 210 3.00 9.1 232 130 1.906.4 164 190 2.70 9.4 238 130 1.806.2 158 190 2.8 8.7 221 140 2.007.1 180 170 2.4 9.7 247 120 1.807.9 200 150 2.20 10.1 256 120 1.707.7 195 160 2.20 9.8 250 120 1.808.3 212 140 2.10 10.8 274 110 1.607.3 186 160 2.4 9.9 251 120 1.708.7 221 140 2.00 12.0 305 100 1.407.0 177 170 2.50 12.0 305 100 1.40

17.4 442 70 1.00 19.2 488 60 0.9010.4 265 110 1.70 14.4 366 80 1.201.8 46 660 9.50 3.3 84 360 5.206.8 172 180 2.60 9.3 236 130 1.906.8 173 180 2.50 9.4 239 130 1.807.3 186 160 2.40 10.3 262 120 1.707.5 191 160 2.30 10.5 267 110 1.606.9 175 170 2.50 9.4 238 130 1.808.3 211 140 2.10 10.9 277 110 1.605.4 136 220 3.20 7.6 192 160 2.307.1 181 .170 2.40 9.7 247 120 1.805.3 134 230 3.3 7.2 183 170 2.406.4 162 190 2.70 8.9 226 140 1.907.0 178 170 2.50 10.0 253 120 1.70

A BSTORMS WHICH SHOULD BE STORMS WHICH SHOULD BE

EXCEEDED ONLY ONCE IN EXCEEDED ONLY ONCE IN10 YEARS 100 YEARS

Intensity lasting Calculated roof area Intensity lasting Calculated roof area5 minutes drained per 5 minutes drained per

downspout area downspout area

in/hr mm/hr sq/ft sq m/ in/hr mm/hr sq/ft sq m/sq in 100 sq mm sq in 100 sq mm

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A51/07

PROPER GUTTER AND DOWNSPOUT SIZING

TABLE 1-2RAINFALL DATA AND DRAINAGE FACTORS (Continued)

A BSTORMS WHICH SHOULD BE STORMS WHICH SHOULD BE

EXCEEDED ONLY ONCE IN EXCEEDED ONLY ONCE IN10 YEARS 100 YEARS

Intensity lasting Calculated roof area Intensity lasting Calculated roof area5 minutes drained per 5 minutes drained per

downspout area downspout area

in/hr mm/hr sq/ft sq m/ in/hr mm/hr sq/ft sq m/sq in 100 sq mm sq in 100 sq mm

7.4 187 160 2.30 10.4 265 110 1.707.1 181 170 2.40 9.9 251 120 1.701.8 46 660 9.50 3.1 77 390 5.701.8 46 660 9.50 2.4 61 500 7.207.4 188 160 2.30 10.5 267 110 1.602.3 57 530 7.60 4.5 114 270 3.902.1 53 570 8.3 5.2 133 230 3.306.7 170 180 2.60 9.3 236 130 1.904.0 102 300 4.30 6.7 171 180 2.604.5 115 270 3.80 6.4 169 180 2.606.5 165 190 2.70 9.1 232 130 1.906.0 152 200 2.90 8.4 213 140 2.106.7 169 180 2.60 9.2 235 130 1.907.3 185 160 2.40 9.8 250 120 1.806.6 167 180 2.60 9.8 250 120 1.806.8 172 180 2.50 9.3 236 130 1.906.3 160 190 2.70 8.8 223 140 2.007.6 193 160 2.30 10.5 267 110 1.602.2 56 550 7.90 3.8 97 310 4.502.1 53 570 8.30 3.0 76 400 5.806.8 172 180 2.60 9.4 238 130 1.806.4 163 190 2.70 8.8 224 140 2.005.6 143 210 3.10 7.8 198 150 2.207.2 184 170 2.40 9.4 238 130 1.807.4 187 160 2.30 10.0 253 120 1.706.7 169 180 2.60 9.0 229 130 1.907.6 193 193 160 10.5 267 110 1.607.6 194 160 2.30 10.5 267 110 1.608.2 208 150 2.10 10.8 274 110 1.607.6 193 160 2.30 10.5 267 110 1.603.0 75 410 5.80 5.2 131 230 3.302.8 71 430 6.20 4.3 108 280 4.107.1 181 170 2.40 9.5 242 130 1.802.1 53 570 8.30 3.3 84 360 5.202.1 53 570 8.30 3.5 90 340 4.906.6 168 180 2.60 9.1 230 130 1.906.8 172 180 2.50 9.5 241 130 1.806.6 168 180 2.60 9.1 232 130 1.905.7 146 210 3.00 9.9 252 120 1.70

MISSOURI: Kansas CitySaint Louis

MONTANA: HelenaMissoula

NEBRASKA: OmahaNEVADA: Reno

Las VegasNEW JERSEY: TrentonNEW MEXICO: Albuquerque

Santa FeNEW YORK: Albany

BuffaloNew York City

NORTH CAROLINA: RaleighNORTH DAKOTA: BismarkOHIO: Cincinnati

ClevelandOKLAHOMA: Oklahoma CityOREGON: Baker

PortlandPENNSYLVANIA: Philadelphia

PittsburghRHODE ISLAND: ProvidenceSOUTH CAROLINA: CharlestonTENNESSEE: Memphis

KnoxvilleTEXAS: Fort Worth

DallasHoustonSan Antonio

UTAH: ProvoSalt Lake City

VIRGINIA: NorfolkWASHINGTON: Seattle

SpokaneWEST VIRGINIA: ParkersburgWISCONSIN: Madison

MilwaukeeWYOMING: Cheyenne

These intensities are based on records and statistical projections. They may occasionally be exceeded either in the general area or at small areas within the designated city.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A61/07

PROPER GUTTER AND DOWNSPOUT SIZING

TYPE AREA “A” Nominal ActualSize Size

Plain sq.in. sq.mm. sq.in sq.mm. in. mm. in. mm.Round 7.07 4560 5.94 3831 3 76 3 76

12.57 810 11.04 7120 4 102 4 10219.63 12661 17.71 11422 5 127 5 12728.27 18234 25.95 16737 6 152 6 15250.24 32404 47.15 30411 8 203 8 203

Corrugated 5.94 3831 3 76 3 76Round 11.04 7120 4 102 4 102

17.72 11429 5 127 5 12725.97 16750 6 152 6 152

Plain 3.94 2541 3.00 1935 2 51 1.75x225 44x57Rectangular 6.00 3870 4.80 3096 3 76 2x3 51x76

12.00 7740 10.31 6649 4 102 3x4 76x10220.00 12900 15.75 10158 5 127 3.75x4.75 95x12124.00 15480 21.56 13906 6 152 4x6 102x152

Rectangular 3.80 2451 3.00 1935 2 51 1.75x2.25 44x57Corrugated 7.73 4985 6.38 4155 3 76 2.37x3.25 60x83

11.70 7621 10.00 6513 4 102 2.75x4.25 70x10818.75 12213 16.63 10832 5 127 3.75x5 95x127

“A” = area of 1/4 in.(6.4 mm) undersized inlet See Figures 1-31 and 1-32 for gage

TABLE 1-3DIMENSIONS OF STANDARD DOWNSPOUTS

7. Assuming that using the fewest number of downspoutsis desirable, their locations will be affected by

a. gutter capacity and length. To limit the effects of ther-mal expansion in gutters 50 ft(15.3 m) is a practical maxi-mum length of gutter to be served by a downspout. Unlessspecial provisions are made for flexibility in downspouts,gutters and their support systems, gutters should expandaway from downspouts and downspouts should not be lo-cated near gutter expansion joints. See expansion coefficientsin Appendix A-1 and expansion allowances in Figures 1-5 to 1-10.

b. the capacity of the inlet tube. See Table 1-3 and Figure1-33. Also, a sharp bend at the inlet may clog.

c. potential for water freezing in downspouts and gut-ters. Open, partially open or corrugated styles downspoutsare suggested for areas subject to icing. Locating down-spouts on the north side of buildings is not recommendedfor such areas.

d. the appearance of the downspout system and a poten-tial need for concealment. See Figures 1-31 and 1-32.

e. the greater capacity of a pitched gutter.f. the downspout discharge location. Water disposal at

this location should be acceptable. See Figures 1-31 and 1-36.g. the risk of gutter overflow from insufficient drainage

capacity. See Figures 1-4, 1-21, and 1-23.h. a scupper serving a designated roof area. See Figures

1-26 to 1-30.

After the number and location of downspouts have beendetermined, the areas to be drained by each downspout

should be figured. In making this calculation for a pitchedroof, the plan area should be adjusted according to recom-mendations given on Table 1-1.

SAMPLE PROBLEM: Select downspouts for a building inBoston, Mass. The building is 100 x 85 ft.(30.5 x 26 m) witha double pitched roof having a slope of 6 in./ft.(152 mm/m).The slope is toward the 100 ft.(30.5 m) side. Maximum rain-fall conditions will be used to determine downspout size.

It is decided to drain the building with 4 downspouts locatedat each corner of the building. An expansion joint will beinstalled in each gutter between the downspouts.

The plan area of this building is 8500 sq ft.(790 sq m). Sincethe slope is 6 in./ft.(152 mm/m), factor 1.10 is used (Table1-1), making the design area 9350 sq ft.(868 sq m). Thuseach of the four downspouts will serve a 2338 sq ft.(217 sqm) area. From column B, Table 1-2, opposite Boston, it isfound that 1 sq in.(645 sq mm) of downspout will drain 170sq ft.(16 sq m) of roof area. Divide 2338(217) by 170(16) todetermine that each downspout should have a minimum areaof 13.56 sq in.(8746 sq mm).

From Table 1-3, it is found that there is a choice of; a 5 in.(127 mm) Plain Round, a 5 in.(127 mm) Corrugated Round,a 5 in.(127 mm) Rectangular Corrugated, or 5 in.(127 mm)Plain Rectangular downspout.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A71/07

PROPER GUTTER AND DOWNSPOUT SIZING

GUTTER SIZING

In sizing gutters, the following considerations apply for typi-cal section lengths of 8 to 10 feet( 2.41 to 3.0 m):

1. Spacing and size of outlet openings. (The gutter can neverbe any more effective than the outlet and downspout se-lected to drain it. Downspout sizes must not exceed the bot-tom width of the gutter.)2. Slope of the roof. (The gutter must be of such a designand location that water from a steep pitched roof will not byits own velocity tend to overrun the front edge.)3. Style of gutters to be used. (All gutters are not effectivefor their full depth and width, see Figures 1-1 and 1-4 fordesign data.)4. Maximum length of gutter. (50 ft.(15.2 m) between endsor expansion joints is the limit unless the system is espe-cially designed to accommodate the greater expansion, thelarger flow and the need for special supports.)5. Gutter support capability. (Supports should be based onfull capacity of the gutter. Ice load capacity also affect thesize and strength of the system.)

Level gutters may be sized by Charts 1-1, 1-2, or 1-3. Slopedgutters may be sized by Chart 1-3. Formulae for flow in gut-ters with different pitch are not available. The capacity of agutter with 1/16 in./ft.(5.21 mm/m) or less pitch is taken asthat of a level gutter even though it is somewhat greater.

RECTANGULAR GUTTER SIZING

The size of rectangular gutters depends upon thesefactors:1. Area to be drained. (A, Chart 1-1)2. Rainfall intensity per hour. (I, Chart 1-1)3. Length of gutter in ft.(m) (L, Chart 1-1)4. Ratio of depth to width of gutter. (M, Chart 1-1)

Chart 1-1 is based on level gutter capacity as experimentallydetermined by the National Institute of Standards and Tech-nology (NIST) formerly National Bureau of Standards. It isplotted from W = 0.0106 M-4/7 L3/28(1A)5/14 with W in feet(m).

IRREGULAR CROSS SECTION GUTTER SIZING

The required sizes of gutters other than rectangular or roundcan be determined by finding the semicircle or rectangulararea that most closely fits the irregular cross section.

HALF ROUND GUTTER SIZING

Chart 1-2 is based on level gutter capacity as determined byNIST. It is based on W = 0.0182 (lA)2/5. W is the width inin.(mm). I denotes rainfall intensity (Table 1-2) and A is theroof area in square feet(sq m) (Table 1-1).

SAMPLE PROBLEM: To size rectangular gutter for a build-ing 120 x 30 ft.(35.6 x 9.1 m) located in Buffalo, NY. Thisbuilding has a flat roof with a raised roof edge on three sides.A gutter is to be located on one of the 120 ft.(35.6 m) sides.So that each section of gutter will not exceed 50 ft.(15.2 m),three downspouts will be used with 2 gutter expansion joints.The area to be drained by each section of gutter will be 1200sq ft.(111.5 sq m), the rainfall intensity from Table 1-2, col Ais 6 in/hr(152 mm/hr), the length of each gutter section is40 ft.(12.2 m), and the ratio of gutter depth to width is 0.75.On Chart 1-1 find the vertical line representing L = 40(12.2m). Proceed vertically along this line to its intersection withthe oblique line representing M = 0.75. Pass to B verticallyto the intersect the horizontal line representing IA =7200(16948). The point of intersection occurs between theoblique line representing gutter widths of 5 and 6 in.(127and 152 mm). The required width of gutter is, therefore, 6in.(152 mm) and its depth need be only 4.5 in.(114 mm).in.

SAMPLE PROBLEM: To size a half round gutter for a build-ing, located in Kansas City, Mo., with a flat roof 80 x 40ft.(24.4 x 12.2 m). This building has a parapet wall on threesides and a gutter to be located on an 80 ft.(24.4 m) side.Column A, Table 1-2, was used to determine rainfall condi-tions. Since the gutter run will exceed 50 ft.(15.2 m), twodownspouts will be used with an expansion joint between.

The area of the building is 3200 sq ft.(297 sq m). Thus eachof the downspouts will serve an area of 1600 sq ft. (149 sqm). From column A, Table 1-2, opposite Kansas City, Mo., itis found that 1 sq in.(100 sq mm) of downspout will drain160 sq ft.(2.3 sq m/100 sq mm) of roof area. Divide 1600 sqft.(149 sq m) by 160 sq ft/sq in.(2.3 sq m/100 sq mm) todetermine that each downspout should have a minimum areaof 10 sq in.(6470 sq mm). From Table 1-3 it is found that a4in.(102 mm) downspout is required. From Chart 1-2 it isdetermined that a 9.5 in.(241 mm) half round gutter shouldbe used. Area and flow in Table 1-4 are based on 1 in.(25mm) of rainfall per hour; divide these areas by the local rain-fall rate in inches per hour to determine the actual roof areato be served by the gutter diameter. “The capacity of a slopedrectangular gutter may be approximated by using a guttercross section area not less than that of a semicircular gutterand a depth to width ratio of at least 0.75.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A81/07

PROPER GUTTER AND DOWNSPOUT SIZING

CHART 1-1WIDTH OF RECTANGULAR GUTTERS FOR GIVEN ROOF AREAS

AND RAINFALL INTENSITIES

50000

40000

30000

20000

15000

10000

7200

5000

4000

3000

2000

1500

IA = 1000

L = 1000

15

20

30

40

50

60

117,983

94,386

70,789

47,193

35,395

23,596

16,989

11,798

9,439

7,079

4,719

3,539

2,359

3.0

4.6

6.1

9.1

12.2

15.2

18.3

0.50

0.60

0.70

0.80

0.90

1.00

1.25

1.50

1.7 5

2.00

2.252.50

W = 11" (279 mm)

10" (254 mm)

9" (229 mm)

8" (203 mm)6" (152 mm)

WIDTH OF GUTTER 7" (178 mm)5" (127 mm)

4" (102 mm)3" (76 mm)

2" (51 mm)

M = D/W

IA = RAINFALL INTENSITY x AREA (AREA FROM TABLE 1-1 THAT RELATES TO L)

M = DEPTH/WIDTH

L = LENGTH OF GUTTER – FEET(SERVED BY A DOW

NSPOUT)

L = LENGTH OF GUTTER – METERS

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A91/07

PROPER GUTTER AND DOWNSPOUT SIZING

TABLE 1-4SLOPED ROOF GUTTERS

Maximum Roof Area for Gutters

in mm sq in sq mm sq ft sq m gpm l/s sq ft sq m gpm l/s sq ft sq m gpm l/s

3 76 3.5 2258 680 63 7 0.44 960 89 10 0.63 1360 126 14 0.88

4 102 6.3 4064 1440 134 15 0.95 2040 190 21 1.33 2880 268 30 2.08

5 127 9.8 6321 2500 232 26 1.64 3520 327 37 2.33 5000 465 52 3.28

6 152 14.1 9095 3840 357 40 2.52 5440 505 57 3.60 7680 713 80 5.05

7 178 5520 513 57 3.60 7800 725 81 5.11 11040 1030 115 7.26

8 203 25.1 16190 7960 739 83 5.24 11200 1040 116. 7.32 14400 1338 165 10.4

10 254 39.1 25220 14400 1338 150 9.47 20400 1895 212 13.4 28800 2676 299 18.9

Diameter of C.S. Area Level Level 1/8 in per ft slope 1/4 in per ft slopegutter (3.2 mm/.3 m) (6.4 mm/.3 m)

3 in.

76.2 mm

100 200 300 400 500 600 800 1000 1500 2000 3000 4000

9.3 19 28 37 47 56 74 93 139 186 279 37212

11

10

9

8

7

6

5

4

3

305

279

254

229

203

178

152

127

102

4 in.

102 mm

5 in.

127 mm

6 in.

152 mm

7 in.

178 mm

8 in.

203 mm

9 in.

229 mm

10 in.

254 mm

11 in.

279 mm

12 in.

305 mm

13 in.

330 mm

14 in.

356 mm

15 in.

381 mm

CHART 1-2HALF ROUND GUTTER SELECTION

Width required for given roof areas and rainfall intensities

Roof Area (A) (Square M)

Roof Area (A) (square feet)

Rain

fall

Inte

nsity

(1) I

n. P

er H

r.

Rain

fall

Inte

nsity

(1) m

m. P

er H

r .

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A101/07

GUTTER HANGER SELECTION

In deciding which hanger style is most acceptable, please consider such things as appearance, expected life, iceloading, size of gutter, material and expansion.

When fascia board is less than 2" thick, the hanger fasteners must be driven into the rafter ends.

In areas subject to snow slide, coordinate the front edge elevation of the gutter with the extended roof line (see Tableon Required Clearance of Gutter Below Extended Roof Line).

RECOMMENDED GUTTER HANGER SPACING

Gutter hangers should be spaced at a maximum of 36" on center. In areas where ice and snow are long lasting, hangerspacing should be reduced to 18" on center.

RECOMMENDED GUTTER PITCH ANDPOSITION ON THE EAVE

There are two factors that go into determining gutter position on the eave, the pitch of the gutter and the roof slope.Gutter should be pitched 1/16" or greater per foot for proper drainage. Gutter can be run level for appearance butaddition downspout will be necessary (See section on Proper Gutter and Downspout Sizing).

Gutters should be placed below the extended roof line so that snow and ice can slide clear. Steeper pitches requireless clearance.

LAP JOINT SPECIFICATION

Joints in gutters must be overlapped 1", riveted on 2" centers and soldered if the metal can be soldered (see solderinginstructions for details). With metals that cannot be soldered, a compatible sealant must be continuously appliedwithin a 1" lapped joint and the sealed lap must be riveted on 1" centers. All rivet applications must receive sealantafter installation. Lapping joints in the direction of flow is preferred; gutter outlet connections may not fit thiscondition.

PENETRATING WALL FASTENERS

We recommend drilling holes in masonary and the use of metal hole inserts and/or epoxy sealant when installingthese pipe hook fasteners. Wall penetrations need to be sealed to prevent water intrusion and related problems.Driving these into brick mortar joints will cause damage to the pipe hook fasteners and the wall.

Roof Pitch Clearance Below Extended Roof Line

0 in 12 – 2 in 12 1"

3 in 12 – 5 in 12 3/4"

6 in 12 – 8 in 12 1/2"

9 in 12 or Greater 1/4"

Required Clearance of Gutter Below Extended Roof Line

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A111/07

TYPICAL GUTTER HANGER DETAILS

*Only 1 hole will line up with bolt Center distance on shank is 1/2". Center distance on circle is 3/8". This allows the gutter to be pitched by lowering the circle on the shank in increments of 1/8". Bergerdoes not imply fitness of use of our components in conjunction with competitors products. Berger will not warrant any system that incorporates products not manufactured by Berger.

Fascia Mounted Shank Plate -Steep Roof Pitch or Small FasciaBoard may Need #10 or #30 Shank*

Extended Roof Line

Circle

#1 ShankPlate

Nut & Bolt

3/4" Clearance

6

12

Fasteners

WoodCornice

Cornice Mounted Shank and Circle -Roof Pitch of 8/12 or Greater willRequire an Extension Shank*

6

12

Extended Roof Line

Circle

#6 Shank

Nut & Bolt

3/4" Clearance

Fasteners

Lock shank againstdent on circle

Rafter Mounted Shank and Circlewith Square Cut Rafter Tails*

Extended Roof Line

Circle

#11 Shank

Nut & Bolt

3/4" Clearance

6

12

Lock shank againstdent on circle

Fasteners

Roof Mount Shank and Circle withRecessed Fascia Board - RoofPitch of 6/12 or Greater willRequire an Extension Shank*

Extended Roof Line

Circle

#12 or #25 Shank(Angle may be carefully bent toaccommodate roof pitch. Shankshould be plumb to ground and

parallel to the wall face. Do not heat.)

Nuts & Bolts3/4" Clearance

Extension Shank(Shown in full extension - extensionshank should be positioned as high

up on the roof shank as possiblewhile keeping the gutter below the

extended roof line.)

6

12

Lock shank againstdent on circle

Fasteners

Fascia Mount Shank and Circle withAngled Fascia Board - Roof Pitch of8/12 or Greater will Require anExtension Shank*

Extended Roof Line

Circle

#30 Shank

Nut & Bolt

3/4" Clearance

6

12

Fasteners

Angled FasciaBoard

Shank should be perpendicularto ground and parallel

to building face

1/4" Clearance

Exten

ded R

oof L

ine

Fascia Mounted Shank with 6" FasciaBoard - Roof Pitch of Greater than12/12 will Require an ExtensionShank - Fascia Board of Less than 6"will Require Extension Shank*

Circle

#10 or #30Shank

Nut & Bolt

Fasteners

12

12

Lock shank againstdent on circle

6" Fascia Board

Lock shank againstdent on circle

Shank should be perpendicularto ground and parallel

to building face

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

The selection of gutter material must account for the potential of Galvanic or Electrolytic Corrosion at contact pointswith other metals and at supports. Also, special selection is required for corrosive environments such as coastal orpolluted industrial atmospheres. Galvanic or Electrolytic Corrosion can occur when dissimilar metals are in contact inthe presence of an electrolyte. An electrolyte is any non-metal substance that will conduct an electric current,especially a liquid solution. Water, particularly rainwater, is a good electrolyte.

A galvanic scale has been developed for metals. Metals that are more electropositive (anodic) will corrode moreeasily and metals that are more electronegative (cathodic) are more corrosion resistant. When two dissimilar metalsare in contact in the presence of an electrolyte, the electropositive metal will corrode. The farther the two metals arefrom each other on the galvanic scale, the speed and effect of the reaction will increase.

GALVANIC SCALE

GALVANIC CORROSION

Electropositive / Anodic EndZinc

AluminumGalvanized Steel

CadmiumMild Steel, Wrought Iron

Cast IronStainless Steel, types 304 and 316 (active)

Tin - Lead SolderLead

Brass, BronzeCopper

Stainless Steel, types 304 and 316 (passive)

Electronegative / Cathodic End

To reduce the tendency for galvanic corrosion to occur between dissimilar metals one or more of the followingactions can be taken:

1. Avoid contact between metals that are father apart on the scale.2. Do not couple a small exposed area of a more electropositive (anodic) metal with a large area of a more

electropositive (cathodic) metal. Fasteners are a particular concern in this regard.3. Coat the electropositive (cathodic) metal with a suitable paint or other non-metallic coating (or coat both

surfaces at their interface). Zinc chromate or bituminous coatings are often used.4. Separate the metals by tape, gasket, waterproof paper, elastomeric sheet, sealant or other non-absorbent,

non-conductive material.5. Do not allow moisture runoff from a more electronegative (cathodic) metal to drain on a more electropositive

(anodic) metal, even if the metals are not in contact.6. Remove metal particles that are deposited from steel dies on formed metals (or prevent the deposits from

occurring).

Miscellaneous Information about Galvanic Corrosion:1. Passivated stainless steel has been chemically cleaned, usually with an acid solution.2. Anodized aluminum is considered compatible with all other metals.3. Salts increase the electrical conductivity of water.4. The discharge from drain pipes on rooftop air-conditioning units can be very corrosive, particularly if the

piping is copper and the drainage goes into galvanized steel scuppers, conductor heads or gutters.5. Copper nails / fasteners should not be used for fastening galvanized steel roof panels even though the contact

area of the more electropositive (anodic) zinc coating is small compared to the more electronegative(cathodic) copper metal. Galvanized steel nails / fasteners will corrode rapidly if used on copper roofing.

6. Many organizations and individuals have published corrosion tables. All of the tend to rank corrosion rates innon-quantitative terms such as mild, moderate and severe. Rates of corrosion are also affected by conditionssuch as seacoast, dry inland, acid rain and polluted industrial atmospheres.

Additional information on galvanic corrosion prediction is found in ASTM Standard G82 and ASTM STP 576.

Page A121/07

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A131/07

EXPANSION OF METALS USED FOR ROOF DRAINAGE

Increase in 50 ft Length of Material Due to an Increase in Temperature of 100° Fahrenheit

Note: Material will decrease in length by the same distances due to a decrease in temperature of 100° Fahrenheit.

Gutter Expansion:

It is essential to provide expansion joints in all gutter installations to allow for movement due to temperature changes.In planning expansion joint locations, it must be recognized that an expansion joint acts as a dam in the gutter,therefore, the number and placement of downspouts will be influenced (see section on Proper Gutter and DownspoutSizing).

No gutter length should exceed 50 ft without an expansion joint. Expansion joints should be installed to comply withthe SMACNA Architectural Sheet Metal Manual 5th Edition page 1.16 to 1.17 – Allowances For Gutter Expansion.

There are two types of expansion joints commonly used in gutter installation, Lap Type and Butt Type. Both of thesetypes of expansion joints are easily fabricated on the jobsite using end caps and small amounts of sheet metal.Details for both Lap Type and Butt Type can be found in the SMACNA Architectural Sheet Metal Manual 5th Editionpages 1.18 to 1.21 – Lap Type Expansion Joint Figure 1-6 and Butt Type Expansion Joint Figure 1-7.

BASIC SOLDERING TERMS AND TECHNIQUES

The successful application of soldering requires several elements that include properly tinned coppers, applicationand type of flux, properly blended solder, type of soldering tip, correctly heated coppers, properly prepared metalsurface free of oxidation and the skill of the person applying the solder.

Common Terms

Solder – Any of various fusible alloys, usually made of tin and lead, used to join metallic parts.

Soldering – joining or uniting of two or more pieces of metal by means of an alloy, usually tin and lead, having a lowermelting point than the pieces being joined.

Soldering Coppers – an instrument for soldering, consisting of a bit or bolt of copper having a pointed or wedge-shaped end, and furnished with a handle. Soldering Coppers can have various shapes for different kinds of work.

Tinning – covering the point of a soldering copper or other surface with solder.

Flux – A substance applied to a surface to be joined by welding, soldering or brazing to facilitate the flowing of solderand prevent formation of oxides.

Sal Ammoniac – another name for Ammonium Chloride (NH4Cl), is a white crystalline compound used as a soldering flux.

Zinc Chloride – (ZnCl) A substance, also called cut or killed acid, which is unequalled as a flux when soldering galvanizedsteel, stainless steel and copper. It is colorless, odorless and corrosive; therefore it should be handled with care.

Muriatic Acid – The commercial grade of Hydrochloric Acid (HCl), also called raw acid, which is used for making ZincChloride, used as a flux and for cleaning dirty parts of metal before they are soldered. It is colorless, has a sharppungent odor and is corrosive; therefore it should be handled with care.

Rosin – The by-product of oil of turpentine that is a common, non-corrosive type of flux for soldering copper. Rosin isusually found in powder or paste form.

Oxide – A compound that is formed on the surface of a metal due to a reaction with the oxygen in the air.

Galvanized Steel Copper Stainless Steel Aluminum Zinc

Increase (in inches) 13/32" 5/8" 5/8" 25/32" 1 1/32"

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A141/07

Preparation

Filing and Tinning Soldering Coppers

Unless the soldering copper is properly tinned, a good soldering job is impossible. Tinning keeps scale andcorrosion from forming on the soldering copper point that acts as insulation, allows the solder to flow properlyfrom the point to the metal, and keeps dirt and scale out of both the solder and the seam. For best results, use a50% Tin – 50% Lead solder.

1. Heat the copper to a cherry red and place it in a vise. Using a coarse file, remove pits and old tinning.Then using a finer file, smooth off the rough edges of the corners of the point.

2. Reheat the copper enough to melt the solder. Apply a small portion of solder to the tip and rub the tiplightly back and forth on a block of Sal Ammoniac. If the solder does not adhere to the point, it isbecause the soldering copper is not hot enough. Do not inhale the white smoke that should rise fromthe Sal Ammoniac block. It is a toxic gas and should not be breathed.

3. The solder copper should be neither overheated nor under heated during the tinning operation. If thecopper is too hot, the tin will burn off as fast as it is applied. If it is too cold, the solder will not adhereto the copper.

Clean All Surfaces of Oxides, Dirt, Grease, and Other Foreign Matter

Unless the metal that is being soldered is clean, neither the solder nor the flux will adhere to the surface if themetal.

Applying the Soldering Flux

Applying the flux is important. Carelessness in its application will ruin the entire solder procedure.

1. Liquid Fluxes are applied with a small brush. Dip the brush and spread it lightly on the area to besoldered. Do not apply flux anywhere except where the soldering is to be done.

2. Powdered flux, such as rosin may be sprinkled onto the surface to be soldered or it can be melted on tothe metal with a hot copper. Do not apply flux anywhere except where the soldering is to be done.

3. Flux will absorb moisture, which weakens its capability. Be sure to use fresh flux that has not beendiluted.

Soldering

Position of the Soldering Copper

The position of the soldering copper is important as it is applied to the parent metal because it heats the metal tothe melting point of solder and it keeps the solder in a liquid state while soldering.

1. It is important that as much of the point of the copper is resting on the metal as possible to allowmaximum heat transfer from the tip to the metal. Most of the heat is in the body and the base of thepoint of the soldering copper – not in the tip.

2. Since melted solders flow to the hottest point of the metal, have the base of the soldering copper incontact with the area in which the solder is to flow. When soldering a seam, allow the soldering copperto heat the seam itself so solder will flow into the seam for a watertight seal.

BASIC SOLDERING TERMS AND TECHNIQUES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Page A151/07

BASIC SOLDERING TERMS AND TECHNIQUES /STORAGE AND HANDLING OF PRODUCT

Soldering Different Types of Metal

Different techniques and materials are needed to effectively solder different types of metal.

1. Galvanized Steela. If the galvanized steel is bright and clear, use Zinc Chloride as a flux to make a well-bonded joint.b. If the galvanized steel is dull and dirty, use Muriatic Acid as a flux to allow the solder to bond.c. For best results, use a 50% Tin – 50% Lead solder.d. All flux should be washed off of the metal after soldering is complete.e. There are many commercially marketed fluxes for soldering galvanized steel.

2. Coppera. If the surface of the copper is free of oxide, it can be easily soldered using Zinc Chloride as a flux.b. If the copper is dull, apply Muriatic Acid directly to the metal with an acid brush to clean the

surface. The Muriatic Acid should be washed off with a damp rag before applying the Zinc Chlorideas a flux.

c. For best results, use a 50% Tin – 50% Lead solder.d. All flux should be washed off of the metal after soldering is complete.e. There are many commercially marketed fluxes for soldering copper.

3. Stainless Steela. Apply Muriatic Acid directly to the metal with an acid brush to clean the surface.b. Leave the acid on the surface of the metal for the required time (this varies with the type of

stainless steel and the strength of the acid).c. The Muriatic Acid should be washed off with a damp rag before applying the Zinc Chloride as a flux.d. For best results, use a 50% Tin – 50% Lead solder.e. All flux should be washed off of the metal after soldering is complete.f. There are many commercially marketed fluxes for soldering stainless steel.

STORAGE AND HANDLING OF PRODUCT

Berger products must be stored in a properly ventilated, dry environment to prevent condensation on metal surfaces.Materials that are stored in areas subject to temperature variations, outside storage or subjected to moisture damageare not returnable. Galvanized Steel and Zinc surfaces are susceptible to humid storage stain or white rust. SMACNAguidelines for storage and handling of materials apply. Refer to SMACNA appendix A-5 sections 1.7, 1.8, 1.9.

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECH

NICA

L RE

FERE

NCE

APPE

NDIX

Page A161/07

PATINA CHEMICAL SOURCES

(215) 355-1200 • (800) 523-8852 • Fax (215) 355-7738

TECHNICAL REFERENCE APPENDIX

Copper will Patina naturally in most areas within 7 years when exposed to normal air quality and moisture. Areas that are dry orat high altitudes will take longer or not react to environmental surface oxidation.

Berger Building Products, Inc provides this information as a service with the understanding that the results of the chemicalpatina will vary and Berger assumes no liability.

Berger cautions the user that the user is responsible for the results. The user also must comply with all manufacturer safetyrecommendations on handling and disposing of chemicals in accordance with all Local, State and Federal EPA Guidelines.

User can check for other sources on the internet, phone and industrial directories.

Triple-S Chemical Products, IncLos Angeles800-862-5958

Patina Solutions800-882-7004

Jax Chemical CoFloral Park, NY718-347-0057

The Copper Development Association (CDA) provides information on the use of copper for every purpose known to man at thewebsite:http://www.copper.org

For specific information on architectural copper finishes go directly to:http://www.copper.org/applications/architecture/finishes.html