table of contents - nautic steels,home ® nautic steels ltd. (a member of pantech group holdings...
TRANSCRIPT
1
®
Nautic Steels Ltd.(A member of Pantech Group Holdings Berhad, Listed on Main Board of Bursa Malaysia)
Nautic House, ClaymoreTame Valley Industrial Estate
TamworthStaffordshire
B77 5DQUnited Kingdom
Tel: +44 (0)1827 281111Fax: +44 (0)1827 281444
Email: [email protected]
www.nautic.co.uk
®
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
3
Company Background
Product Categories
Quality Management System
EEMUA• EEMUA 144
- Section 1- Section 2
• EEMUA 145- Section 1A- Section 1B- Section 2A- Section 2B- Section 3- Section 4
• EEMUA 146- Section 1- Section 2- Section 3- Section 5- Section 6- Section 7
ASME / BS / MSS SP-43• ASME B16.11• ASME B16.48• ASME B16.5• ASME B16.9• BS 3799• MSS SP-43
Reference
01
05
09
13151617
19202223232426
2930 37
4547
49525456687577
79
Table of Contents
Nautic Steels Ltd, established in 1978 with current factory size of more than 100,000sq ft is strategically located in Tamworth, Staffordshire, the industrial heart of the United Kingdom.
Nautic Steels is an ISO 9001:2008 certified Company and is one of the world’s leading manufacturers of pipes, fittings, flanges and ancillary equipment with material grades of Nickel Alloys, Copper Nickel 90/10 and 70/30, Austenitic Stainless Steels, 6Mo, Duplex and Super Duplex. Our products are widely used in Oil and Gas, Onshore, Offshore, Chemical and Petrochemical, Marine and Shipbuidlings, Defence industries and Seawater Systems including Fire Water, Desalination and Water Cooling Plants.
With more than 35 years of experience, Nautic Steels is fully committed to our philosophy of producing high quality products, prompt delivery and continuous improvement to fulfil our customers’ needs.
Beside our excellent manufacturing capability, extensive knowledge and experience, we are also constantly improving and expanding our product by investing in the research and development (R&D) in order to be relevant to the industry’s demand.
Our products are well accepted in the major Oil and Gas, Marine & Shipyard companies such as Adma, Aramco, Norsok M-650, Petronas, Petrobas, Qatar Petroleum, Zadco and others.
COMPANY BACKGROUND
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
INDUSTRY APPLICATION FOR NICKEL ALLOYS AND COPPER NICKELNickel alloys have excellent resistance to corrosion and high temperature applications.
Copper nickel has resistance to corrosion, especially for seawater that requires superior resistance to impingement corrosion attack.
Application for:• Bilge and Ballast Systems
• Cargo Heating Coils
• Chemical Tanker Buildings
• Fire Fighting Systems
• Hydraulic and Pneumatic Systems
• Insert-Gas Systems
• Onshores
• Offshores
• Petrochemical & Chemical Processing
• Power Generation
• Power Station Condensers
• Pulp & Paper
• Sanitory Systems
• Seawater Cooling Systems
• Seawater Desalination Plants
• Shipboard Sea Water Systems
• Ship-building
• Splash Zone Sheathing
• Waste Water Treatment
• Water Instakes
2
Nautic Steels Ltd, established in 1978 with current factory size of more than 100,000sq ft is strategically located in Tamworth, Staffordshire, the industrial heart of the United Kingdom.
Nautic Steels is an ISO 9001:2008 certified Company and is one of the world’s leading manufacturers of pipes, fittings, flanges and ancillary equipment with material grades of Nickel Alloys, Copper Nickel 90/10 and 70/30, Austenitic Stainless Steels, 6Mo, Duplex and Super Duplex. Our products are widely used in Oil and Gas, Onshore, Offshore, Chemical and Petrochemical, Marine and Shipbuidlings, Defence industries and SeawaterSystems including Fire Water, Desalination and Water Cooling Plants.
With more than 35 years of experience, Nautic Steels is fully committed to our philosophy of producing high quality products, prompt delivery and continuous improvement to fulfil our customers’ needs.
Beside our excellent manufacturing capability, extensive knowledge and experience, we are also constantly improving and expanding our product by investing in the research and development (R&D) in order to be relevant to the industry’s demand.
Our products are well accepted in the major Oil and Gas, Marine & Shipyard companies such as Adma, Aramco, Norsok M-650, Petronas, Petrobas, Qatar Petroleum, Zadco and others.
COMPANY BACKGROUND
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
INDUSTRY APPLICATION FOR NICKEL ALLOYS AND COPPER NICKELNickel alloys have excellent resistance to corrosion and high temperature applications.
Copper nickel has resistance to corrosion, especially for seawater that requires superior resistance to impingement corrosion attack.
Application for:• Bilge and Ballast Systems
• Cargo Heating Coils
• Chemical Tanker Buildings
• Fire Fighting Systems
• Hydraulic and Pneumatic Systems
• Insert-Gas Systems
• Onshores
• Offshores
• Petrochemical & Chemical Processing
• Power Generation
• Power Station Condensers
• Pulp & Paper
• Sanitory Systems
• Seawater Cooling Systems
• Seawater Desalination Plants
• Shipboard Sea Water Systems
• Ship-building
• Splash Zone Sheathing
• Waste Water Treatment
• Water Instakes
3
We manufacture and stock a comprehensive of product range in Nickel Alloys, Duplex, Super Duplex, Austenitic Stainless Steels, Copper Nickel 90/10 and 70/30 and 6Mo.
PRODUCT CATEGORIES
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
All products are manufactured in accordance to standards and specifications.
Pipes/TubesSeamless (1/2" to 16") and welded pipes/tubes (8" to 36") with wall thicknesses ranging from 2mm to 19mm.
Butt-welded and forged fittings in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS.Fittings
FlangesFlanges in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS. Classes vary from 150 up to 2500 lb.
OthersOlets, nipples, capillary, compression, socket weld.
Forged Fittings Flanges SpecialFlanges Olets Nipples
Capillary Brazed Composite BlindComposite
Blind Spades ElboletsSwage Nipples
(Concentric/Eccentric)
Socket Weld Composite Weld Neck CompositeSpectacle Blinds
Latrolets Pipe Nipples
Screwed Composite Slip-on Nipoflanges Threadolets
Compression Solid BlindSpades and
Ring Spacers Nipolets
Solid Weld-Neck Spectacle Blinds Sockolets
Solid Slip on Weldolets
Socket Weld Weldoflanges
Stub End
Threaded
NIPPLESFORGING FITTINGS, FLANGES, OLETS
Pipes/Tubes Butt- Welded Fittings
Tees
Reducers(Concentric/Eccentric)
Seamless and Welded Elbows
End Caps
Saddles
PIPES BUTT-WELDED FITTINGS
PRODUCT RANGE
Alloys UNS
NICKELALLOYS
Alloy 200/201 N02200/N02201
Alloy 400 N04400
Alloy 600 N06600
Alloy 601 N06601
Alloy 625 N06625
Alloy 800 N08800
Alloy 801 N08801
Alloy 800H N08810
Alloy 800HT N08811
Alloy 825 N08825
Alloy C22 N06022
Alloy C276 N10276
Alloys UNS
DUPLEX &SUPER
DUPLEX
Alloys UNSAUSTENITIC STAINLESS
STEELS
Alloys UNS
COPPERNICKEL(Cu-Ni)
Duplex 2205 S31803
Duplex 2205 S32205
Super Duplex 2507 S32750
Super Duplex S32760
6Mo S31254
904L N08904
90/10 Cu-Ni C70600
90/10 Cu-Ni C70620
EEMUA 7060X UNS 7060X
70/30 Cu-Ni C71500
TYPES OF MATERIAL
6
We manufacture and stock a comprehensive of product range in Nickel Alloys, Duplex, Super Duplex, Austenitic Stainless Steels, Copper Nickel 90/10 and 70/30 and 6Mo.
PRODUCT CATEGORIES
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
All products are manufactured in accordance to standards and specifications.
Pipes/TubesSeamless (1/2" to 16") and welded pipes/tubes (8" to 36") with wall thicknesses ranging from 2mm to 19mm.
Butt-welded and forged fittings in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS.Fittings
FlangesFlanges in sizes ranging from 1/2" up to 36" with wall thicknesses ranging from 5s to XXS. Classes vary from 150 up to 2500 lb.
OthersOlets, nipples, capillary, compression, socket weld.
Forged Fittings Flanges SpecialFlanges Olets Nipples
Capillary Brazed Composite BlindComposite
Blind Spades ElboletsSwage Nipples
(Concentric/Eccentric)
Socket Weld Composite Weld Neck CompositeSpectacle Blinds
Latrolets Pipe Nipples
Screwed Composite Slip-on Nipoflanges Threadolets
Compression Solid BlindSpades and
Ring Spacers Nipolets
Solid Weld-Neck Spectacle Blinds Sockolets
Solid Slip on Weldolets
Socket Weld Weldoflanges
Stub End
Threaded
NIPPLESFORGING FITTINGS, FLANGES, OLETS
Pipes/Tubes Butt- Welded Fittings
Tees
Reducers(Concentric/Eccentric)
Seamless and Welded Elbows
End Caps
Saddles
PIPES BUTT-WELDED FITTINGS
PRODUCT RANGE
Alloys UNS
NICKELALLOYS
Alloy 200/201 N02200/N02201
Alloy 400 N04400
Alloy 600 N06600
Alloy 601 N06601
Alloy 625 N06625
Alloy 800 N08800
Alloy 801 N08801
Alloy 800H N08810
Alloy 800HT N08811
Alloy 825 N08825
Alloy C22 N06022
Alloy C276 N10276
Alloys UNS
DUPLEX &SUPER
DUPLEX
Alloys UNSAUSTENITIC STAINLESS
STEELS
Alloys UNS
COPPERNICKEL(Cu-Ni)
Duplex 2205 S31803
Duplex 2205 S32205
Super Duplex 2507 S32750
Super Duplex S32760
6Mo S31254
904L N08904
90/10 Cu-Ni C70600
90/10 Cu-Ni C70620
EEMUA 7060X UNS 7060X
70/30 Cu-Ni C71500
TYPES OF MATERIAL
7
Nautic Steels is committed to achieve high quality through state-of-art technology and equipment, and also certified to ISO 9001:2008 quality management a high quality of products that are in accordance to national and international standards and specifications.
QUALITY MANAGEMENT SYSTEM
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
WELDING PROCEDURES AND SPECIFICATIONSAll welds are 100% radiograpically inspected to ASME code, Section VIII UW51.
All procedures are qualified to ASME IX, generally Lloyd's Register EMEA approval, giving a comprehensive range of materials.
All personnel engaged in welding are qualified to ASME IX, these are checked and approved when required. Welding processs used are T.I.G and M.M.A
TYPE OF TESTINGS
Destructive Testing
• ASTM G48 Method C
• ASTM G28 Method B
• ASTM A262 Practice E Corrosion Test
• Ferrite Determination to ASTM E562
• Hardness Testing
• Tensile Testing to Applicable Specification
• Charpy Impact Testing
• Metallography
• ASTM G48 Method A
Non Destructive Testing
• Liquid Dye Penetrant Testing (DPI)
• Product Material Identification (PMI) - Niton XL2980 Goldd Alloy Analyzer
• Ultrasonic Testing (UT)
• Fischer Ferrite Testing
• Radiography
NAUTIC IS ALSO NORSOK M-650 APPROVED FOR THE FOLLOWING:
Size Type Category ForUNS
S31254UNS
S31803UNS
S32760
6MoDuplex2205
Duplex & Super Duplex
AusteniticStainless Steel
Super DuplexS32760
Stub End Flanges
Stub End Flanges
Elbows, Tees, Reducers
Elbows, Tees, Reducers and End Caps
FlangesWelded6" to 24"
3/4" to 6"
6" to 24"
3/4" to 6"
Seamless
Welded
Seamless
√
√
√
√
√
√
√
√
√
√
√
√
Flanges
Fittings
Fittings
10
Nautic Steels is committed to achieve high quality through state-of-art technology and equipment, and also certified to ISO 9001:2008 quality management a high quality of products that are in accordance to national and international standards and specifications.
QUALITY MANAGEMENT SYSTEM
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
WELDING PROCEDURES AND SPECIFICATIONSAll welds are 100% radiograpically inspected to ASME code, Section VIII UW51.
All procedures are qualified to ASME IX, generally Lloyd's Register EMEA approval, giving a comprehensive range of materials.
All personnel engaged in welding are qualified to ASME IX, these are checked and approved when required. Welding processs used are T.I.G and M.M.A
TYPE OF TESTINGS
Destructive Testing
• ASTM G48 Method C
• ASTM G28 Method B
• ASTM A262 Practice E Corrosion Test
• Ferrite Determination to ASTM E562
• Hardness Testing
• Tensile Testing to Applicable Specification
• Charpy Impact Testing
• Metallography
• ASTM G48 Method A
Non Destructive Testing
• Liquid Dye Penetrant Testing (DPI)
• Product Material Identification (PMI) - Niton XL2 980 Goldd Alloy Analyzer
• Ultrasonic Testing (UT)
• Fischer Ferrite Testing
• Radiography
NAUTIC IS ALSO NORSOK M-650 APPROVED FOR THE FOLLOWING:
Size Type Category ForUNS
S31254UNS
S31803UNS
S32760
6MoDuplex2205
Duplex & Super Duplex
AusteniticStainless Steel
Super DuplexS32760
Stub End Flanges
Stub End Flanges
Elbows, Tees, Reducers
Elbows, Tees, Reducers and End Caps
FlangesWelded6" to 24"
3/4" to 6"
6" to 24"
3/4" to 6"
Seamless
Welded
Seamless
√
√
√
√
√
√
√
√
√
√
√
√
Flanges
Fittings
Fittings
11
Nominal
Size
††Specified
mm
9.5 3 100.62 119.10
11.0 3 118.90 153.10
13.0 3 176.30 217.30
15.0 2 234.90 292.21
17.0 2 302.20 378.76
19.0 2 390.00 475.97
9.0 3 80.75 103.32
8.0 3 65.80 80.64
mm
16 bar
mm
20 bar
mm
16 bar
kg
20 bar
kg
Specified WallThickness †
TheoreticalWeight/Metre
6.5
7.0
8.0
8.5
10.5
12.0
13.5
15.5
368 †
419 †
457.2 †
508 †
610 †
711 †
813 †
914 †
14
16
18
20
24
28
32
36
ApproxLengthMTR.
Seam-welded 90/10 Cu Ni to EEMUA Publication No: 144: Section 2. Condition ‘O’ annealed.
Pipe
Inspection of Welds100% radiographic inspection to ASME code, Section VIII, UW51.
** For 16 and 20 bar systems the 76. 1mm pipe and component size is now referred to as 21/2" nominal andto 88.9mm pipe and component size is referred to as 3" nominal. This is to bring the designations of theses two sizes into line with national and international practice. † The pipe sizes stated are toleranced on the ID as per EEMUA 146 at the welding ends, to match the bores of components. Pipes are normally supplied with plain ends.
I Seam-Welded Pipe
Seam-Welded PipeSeamless Pipe
mm mm
Nominal
Size
††Specified
mm
1/23/4
1 1/41 1/2
2 1/2 **
1 2.5 6 6 1.93 1.9330
2.5 6 6 2.49 2.4938
2.5 6 6 2.94 2.9444.5
2 2.5 6 6 3.82 3.8257
2.5 5/6 5/6 5.15 5.1576.1
3** 2.5 5/6 5/6 6.05 6.0588.9
4 3.0 5/6 5/6 8.82 8.82108
6 3.5 5/6 5/6 13.10 15.24159 †
8 4.5 5/6 4/5.5 24.10 27.04219.1 †
10 5.5 5/6 4/5 33.10 40.27267 †
12 7.0 5/6 4/5 49.05 62.10323.9 †
2.0 6 6 1.29 1.2925
2.0 6 6 0.78 0.7816
14 8.0 4/5.5 3/4.5 65.80 80.64368 †
16 9.0 3/5.5 3 80.75 103.32419 †
mm
16 bar
mm
20 bar
mm16 bar 20 bar
16 bar
kg
20 bar
kg
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
4.0
4.5
5.5
2.0
2.0
6.5
7.0
Specified WallThickness †
Approx LengthMTR.
TheoreticalWeight/Metre
Seamless 90/10 Cu Ni to EEMUA Publication No: 144: Section 1.
Pipe
Outside Diameter (OD)Tube Sizes 1/2"/16mm to 4"/108mm* conform EEMUA Publication No 144: Section 1.
Inside Diameter (ID)Tube sizes 6"/159mm to 36"/914mm conform to EEMUA Publication No: 144 Section 1.
Wall ThicknesssWall thicknesses conform to EEMUA offshore requirements for 16 and 20 bar systems. For 16mm to 108mm sizes, additional wall thickness allowances have been made to increase the robustness to withstand mechanical damage.
I Seamless Pipe
EEMUA 144 - Section 1 EEMUA 144 - Section 2
OD
ID
T
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel16
Nominal
Size
††Specified
mm
9.5 3 100.62 119.10
11.0 3 118.90 153.10
13.0 3 176.30 217.30
15.0 2 234.90 292.21
17.0 2 302.20 378.76
19.0 2 390.00 475.97
9.0 3 80.75 103.32
8.0 3 65.80 80.64
mm
16 bar
mm
20 bar
mm
16 bar
kg
20 bar
kg
Specified WallThickness †
TheoreticalWeight/Metre
6.5
7.0
8.0
8.5
10.5
12.0
13.5
15.5
368 †
419 †
457.2 †
508 †
610 †
711 †
813 †
914 †
14
16
18
20
24
28
32
36
ApproxLengthMTR.
Seam-welded 90/10 Cu Ni to EEMUA Publication No: 144: Section 2. Condition ‘O’ annealed.
Pipe
Inspection of Welds100% radiographic inspection to ASME code, Section VIII, UW51.
** For 16 and 20 bar systems the 76. 1mm pipe and component size is now referred to as 21/2" nominal and to 88.9mm pipe and component size is referred to as 3" nominal. This is to bring the designations of theses two sizes into line with national and international practice. † The pipe sizes stated are toleranced on the ID as per EEMUA 146 at the welding ends, to match the bores of components. Pipes are normally supplied with plain ends.
I Seam-Welded Pipe
Seam-Welded PipeSeamless Pipe
mm mm
Nominal
Size
††Specified
mm
1/23/4
1 1/41 1/2
2 1/2 **
1 2.5 6 6 1.93 1.9330
2.5 6 6 2.49 2.4938
2.5 6 6 2.94 2.9444.5
2 2.5 6 6 3.82 3.8257
2.5 5/6 5/6 5.15 5.1576.1
3** 2.5 5/6 5/6 6.05 6.0588.9
4 3.0 5/6 5/6 8.82 8.82108
6 3.5 5/6 5/6 13.10 15.24159 †
8 4.5 5/6 4/5.5 24.10 27.04219.1 †
10 5.5 5/6 4/5 33.10 40.27267 †
12 7.0 5/6 4/5 49.05 62.10323.9 †
2.0 6 6 1.29 1.2925
2.0 6 6 0.78 0.7816
14 8.0 4/5.5 3/4.5 65.80 80.64368 †
16 9.0 3/5.5 3 80.75 103.32419 †
mm
16 bar
mm
20 bar
mm16 bar 20 bar
16 bar
kg
20 bar
kg
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
4.0
4.5
5.5
2.0
2.0
6.5
7.0
Specified WallThickness †
Approx LengthMTR.
TheoreticalWeight/Metre
Seamless 90/10 Cu Ni to EEMUA Publication No: 144: Section 1.
Pipe
Outside Diameter (OD)Tube Sizes 1/2"/16mm to 4"/108mm* conform EEMUA Publication No 144: Section 1.
Inside Diameter (ID)Tube sizes 6"/159mm to 36"/914mm conform to EEMUA Publication No: 144 Section 1.
Wall ThicknesssWall thicknesses conform to EEMUA offshore requirements for 16 and 20 bar systems. For 16mm to 108mm sizes, additional wall thickness allowances have been made to increase the robustness to withstand mechanical damage.
I Seamless Pipe
EEMUA 144 - Section 1 EEMUA 144 - Section 2
OD
ID
T
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 17
EEMUA 145 - Section 1A EEMUA 145 - Section 1A
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530
38 70 40 33.03 40 51 5 4 3 15 2.5 3.538
44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5
572 99 59 52.16 45 64 6 5 3 15 2.5 3.557
76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1
88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9
1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108
1596 212 161.5 153.00 50 89 9 5 5 15 3.0 4.0159
219.18 270 222 211.10 50 102 9 5 5 15 4.0 5.5219.1
26710 320 270 257.97 50 127 9 5 5 15 4.5 6.0267
323.912 370 327 312.83 50 152 11 7 5 16 5.5 7.0323.9
25 50 27 21.00 40 51 5 3 3 15 2.0 3.025
16 40 18 12.00 35 51 4 2 3 15 2.0 3.016
14 368 430 371 354.22 50 152 11 7 5 16 6.5 8.0368
16 419 482 422 404.17 50 152 12 7 7 16 7.0 8.5419
18 457.2 530 460 441.5 50 152 12 7 7 16 8.0 9.5457.2
20 508 585 511 490.5 50 152 12 7 7 20 8.5 10.0508
24 610 685 613 589.5 60 152 14 9 7 20 10.5 12.0610
28 711 800 719 687.5 60 190 19 9 7 24 12.0 14.5711
32 813 905 821 786.5 60 190 20.5 9 7 24 13.5 16.0813
36 914 1000 922 883.5 60 190 22 9 7 32 15.5 17.5914
mm
d3
mm
d4
mm
d6
mm
d7
mm
h2
mm
Type Sh1
mm
Type Lh1
mm
r1
mm
r2
mm
h5
mm
S1
mm
S2
mm
RatingClass 150 for 16 bar rated systems at 75˚C to EEMUA Publication No. 145: Section 1.
DimensionsTo EEMUA Publication No. 145 Section 1.
16 Bar Composite Weld-NeckWrought stub ends for use with forged carbon steel backing flanges shown on page 22.
Stub End FlangesRatingClass 150 for 20 bar at 38˚C to EEMUA Publication No. 145: Section 1.
DimensionsTo EEMUA Publication No. 145 Section 1.
20 Bar Composite Weld-NeckWrought stub ends for use with forged carbon steel backing flanges shown on page 22.
Stub End Flanges
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530
38 70 40 33.03 40 51 5 4 3 15 2.5 3.538
44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5
572 99 59 52.16 45 64 6 5 3 15 2.5 3.557
76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1
88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9
1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108
1596 212 161.5 152.00 50 89 9 5 5 15 3.5 4.5159
219.18 270 222 210.10 50 102 9 5 5 15 4.5 6.0219.1
26710 320 270 255.93 50 127 9 5 5 15 5.5 7.0267
323.912 370 327 309.74 50 152 11 7 5 16 7.0 8.5323.9
25 50 27 21.00 40 51 5 3 3 15 2.0 3.025
16 40 18 12.00 35 51 4 2 3 15 2.0 3.016
14 368 430 371 351.00 50 152 11 7 5 16 8.0 9.5368
16 419 482 422 399.84 50 152 12 7 7 16 9.0 10.5419
18 457.2 530 460 438.5 50 152 12 7 7 16 9.5 11.0457.2
20 508 585 511 486.5 50 152 12 7 7 20 11.0 12.5508
24 610 685 613 584.5 60 152 14 9 7 20 13.0 14.5610
28 711 800 719 681.5 60 190 19 9 7 24 15.0 19.0711
32 813 905 821 779.5 60 190 20.5 9 7 24 17.0 21.0813
36 914 1000 922 876.5 60 190 22 9 7 32 19.0 23.0914
mm
d3
mm
d4
mm
d6
mm
d7
mm
h2
mm
Type Sh1
mm
Type Lh1
mm
r1
mm
r2
mm
h5
mm
S1
mm
S2
mm
d3
S1
S2
r2
r1
Type S d6d4
d7
h5
h2
SquareCorner
h1
d3
S1
S2
r2
r1
Type L d6d4
d7
h5
h2
SquareCorner
h1
37½º ± 2½º
1.6mm ± 0.8
d3
S1
S2
r2
r1
Type S d6d4
d7
h5
h2
SquareCorner
h1
d3
S1
S2
r2
r1
Type L d6d4
d7
h5
h2
SquareCorner
h1
37½º ± 2½º
1.6mm ± 0.8
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel20
EEMUA 145 - Section 1A EEMUA 145 - Section 1A
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530
38 70 40 33.03 40 51 5 4 3 15 2.5 3.538
44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5
572 99 59 52.16 45 64 6 5 3 15 2.5 3.557
76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1
88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9
1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108
1596 212 161.5 153.00 50 89 9 5 5 15 3.0 4.0159
219.18 270 222 211.10 50 102 9 5 5 15 4.0 5.5219.1
26710 320 270 257.97 50 127 9 5 5 15 4.5 6.0267
323.912 370 327 312.83 50 152 11 7 5 16 5.5 7.0323.9
25 50 27 21.00 40 51 5 3 3 15 2.0 3.025
16 40 18 12.00 35 51 4 2 3 15 2.0 3.016
14 368 430 371 354.22 50 152 11 7 5 16 6.5 8.0368
16 419 482 422 404.17 50 152 12 7 7 16 7.0 8.5419
18 457.2 530 460 441.5 50 152 12 7 7 16 8.0 9.5457.2
20 508 585 511 490.5 50 152 12 7 7 20 8.5 10.0508
24 610 685 613 589.5 60 152 14 9 7 20 10.5 12.0610
28 711 800 719 687.5 60 190 19 9 7 24 12.0 14.5711
32 813 905 821 786.5 60 190 20.5 9 7 24 13.5 16.0813
36 914 1000 922 883.5 60 190 22 9 7 32 15.5 17.5914
mm
d3
mm
d4
mm
d6
mm
d7
mm
h2
mm
Type Sh1
mm
Type Lh1
mm
r1
mm
r2
mm
h5
mm
S1
mm
S2
mm
RatingClass 150 for 16 bar rated systems at 75˚C to EEMUA Publication No. 145: Section 1.
DimensionsTo EEMUA Publication No. 145 Section 1.
16 Bar Composite Weld-NeckWrought stub ends for use with forged carbon steel backing flanges shown on page 22.
Stub End FlangesRatingClass 150 for 20 bar at 38˚C to EEMUA Publication No. 145: Section 1.
DimensionsTo EEMUA Publication No. 145 Section 1.
20 Bar Composite Weld-NeckWrought stub ends for use with forged carbon steel backing flanges shown on page 22.
Stub End Flanges
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 30 60 32 25.00 40 51 5 4 3 15 2.5 3.530
38 70 40 33.03 40 51 5 4 3 15 2.5 3.538
44.5 80 46.5 39.53 45 51 6 4 3 15 2.5 3.544.5
572 99 59 52.16 45 64 6 5 3 15 2.5 3.557
76.1 120 78 71.23 45 64 6 5 3 15 2.5 3.576.1
88.93 130 91 84.08 50 64 7 5 3 15 2.5 3.588.9
1084 158 110 102.13 50 76 7 5 3 15 3.0 4.0108
1596 212 161.5 152.00 50 89 9 5 5 15 3.5 4.5159
219.18 270 222 210.10 50 102 9 5 5 15 4.5 6.0219.1
26710 320 270 255.93 50 127 9 5 5 15 5.5 7.0267
323.912 370 327 309.74 50 152 11 7 5 16 7.0 8.5323.9
25 50 27 21.00 40 51 5 3 3 15 2.0 3.025
16 40 18 12.00 35 51 4 2 3 15 2.0 3.016
14 368 430 371 351.00 50 152 11 7 5 16 8.0 9.5368
16 419 482 422 399.84 50 152 12 7 7 16 9.0 10.5419
18 457.2 530 460 438.5 50 152 12 7 7 16 9.5 11.0457.2
20 508 585 511 486.5 50 152 12 7 7 20 11.0 12.5508
24 610 685 613 584.5 60 152 14 9 7 20 13.0 14.5610
28 711 800 719 681.5 60 190 19 9 7 24 15.0 19.0711
32 813 905 821 779.5 60 190 20.5 9 7 24 17.0 21.0813
36 914 1000 922 876.5 60 190 22 9 7 32 19.0 23.0914
mm
d3
mm
d4
mm
d6
mm
d7
mm
h2
mm
Type Sh1
mm
Type Lh1
mm
r1
mm
r2
mm
h5
mm
S1
mm
S2
mm
d3
S1
S2
r2
r1
Type S d6d4
d7
h5
h2
SquareCorner
h1
d3
S1
S2
r2
r1
Type L d6d4
d7
h5
h2
SquareCorner
h1
37½º ± 2½º
1.6mm ± 0.8
d3
S1
S2
r2
r1
Type S d6d4
d7
h5
h2
SquareCorner
h1
d3
S1
S2
r2
r1
Type L d6d4
d7
h5
h2
SquareCorner
h1
37½º ± 2½º
1.6mm ± 0.8
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 21
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
EEMUA 145 - Section 1B EEMUA 145 - Section 2A & Section 2B
Size d2
in
5/81 30 108 15.9 33 4 3 1.0 1.01.04 1.0479.414
5/81 1/4 38 117 15.9 41 4 3 1.2 1.21.2 1.288.914
5/81 1/2 44.5 127 15.9 48 4 3 1.5 1.51.5 1.598.414
3/4572 152 19.0 62 4 3 2.5 2.52.6 2.6120.618
3/42 1/2 76.1 178 19.0 81 4 3 3.3 3.33.4 3.4139.718
3/488.93 190 19.0 94 4 3 3.8 3.83.9 3.9152.419
3/41084 229 19.0 113 8 3 6.6 6.66.9 6.9190.524
7/81596 279 22.2 164 8 4 9.7 9.910.4 10.7241.327
7/8219.18 343 22.2 225 8 5 15.0 15.116.7 17.0298.431
26710 406 25.4 273 12 5 23.1 23.526.6 27.5362.038 1
323.912 483 25.4 330 12 7 34.6 35.241.0 43.1431.8141
5/83/4 25 98 15.9 28 4 3 0.8 0.80.8 0.869.814
1/2 5/816 89 15.9 19 4 2 0.64 0.640.66 0.6660.314
1 1/814 368 28.6 374 12 7 44.7 45.553.4 55.8476.2533 45
1 1/816 419 28.6 426 16 7 60.0 60.670.5 72.5539.8597 51
1 1/418 457.2 31.8 465 16 7 66.0 68.078.0 84.3577.8635 52
1 1/420 508 31.8 517 20 7 84.4 86.098.7 103.5635.0698 58
1 3/824 610 34.9 618 20 9 131.4 134149.8 156.5749.3813 71
1 3/828 711 34.9 727 28 9 180.3 183.6- -864.0927 81
1 5/832 813 41.1 829 28 9 269.0 275.5- -978.01060 95
1 5/836 914 41.1 931 32 9 335.8 341.0- -1086.01168 105
mm
Db
MinApprox. Total Weight
incl. Stub End-kg
mm
d5
mm
e
mm S 16 bar L S 20 bar L
No. ofBolt
Holes
K
mmmm mm mm
RatingClass 150 for 16 bar at 75˚C and 20 bar 38˚C to EEMUA Publication No. 145: Section 1.
Material CompositionASTM A 105 (normalised) Unless otherwise specified the steel flanges will be supplied galvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or chlorinated rubber paint suitable for marine environment.
Backing FlangesForged carbon steel backing flange for use with 90/10 CuNi inner stub end.
Composite Flanges To Suit Stub End
Size d4
in
1 30 30.08 18 108 14536
1 1/4 38 38.10 18 14545
1 1/2 44.5 44.60 19 127
117
14551
572 57.23 19 152 18667
2 1/2 76.1 76.33 19 178 18687
88.93 89.18 21 190 197100
1084 108.38 23 229 247120
3/4 25 25.08 16 98 14531
1/2
5/85/85/83/43/43/43/4
5/8
5/816 16.07 16
60
70
80
99
120
130
158
53
40 89 145
79.4
88.9
98.4
120.6
139.7
152.4
190.5
69.8
60.321
mm
d1
Inner Stub End - Dimensions Outer Steel Flange - Dimensions
d6
Approx.Total
WeightNo. ofBolt
Holesmm
h1
mm
b
mm
K
mm
38
47
53
69
89
103
123
33
23
d5
mm
15.9
15.9
15.9
19.0
19.0
19.0
19.0
15.9
15.9
mm
d2
mm
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
e
mm
0.92
1.10
1.30
2.20
3.00
3.50
6.00
0.75
0.61
kg
D
mm
h2
mmmm mm
RatingClass 150 for 16 bar at 75˚C and 20 bar at 38˚C to EEMUA Publication No. 145: Section 2.
Composite Slip-on (Welded)Forged carbon steel backing flange with 90/10 CU Ni inner stub end.
Material CompositionBacking flange - ASTM A 105 (normalised) Unless otherwise specified the steel flanges will be suppliedgalvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.
Composite Slip-on Flanges
d2
K
d5D
e
bR=3mmr=3mmd2
K
d5
D
t
bR=3mmr=3mm
d6
h2
h1
d1
d4
r=1mmSquareCorner
22
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
EEMUA 145 - Section 1B EEMUA 145 - Section 2A & Section 2B
Size d2
in
5/81 30 108 15.9 33 4 3 1.0 1.01.04 1.0479.414
5/81 1/4 38 117 15.9 41 4 3 1.2 1.21.2 1.288.914
5/81 1/2 44.5 127 15.9 48 4 3 1.5 1.51.5 1.598.414
3/4572 152 19.0 62 4 3 2.5 2.52.6 2.6120.618
3/42 1/2 76.1 178 19.0 81 4 3 3.3 3.33.4 3.4139.718
3/488.93 190 19.0 94 4 3 3.8 3.83.9 3.9152.419
3/41084 229 19.0 113 8 3 6.6 6.66.9 6.9190.524
7/81596 279 22.2 164 8 4 9.7 9.910.4 10.7241.327
7/8219.18 343 22.2 225 8 5 15.0 15.116.7 17.0298.431
26710 406 25.4 273 12 5 23.1 23.526.6 27.5362.038 1
323.912 483 25.4 330 12 7 34.6 35.241.0 43.1431.8141
5/83/4 25 98 15.9 28 4 3 0.8 0.80.8 0.869.814
1/2 5/816 89 15.9 19 4 2 0.64 0.640.66 0.6660.314
1 1/814 368 28.6 374 12 7 44.7 45.553.4 55.8476.2533 45
1 1/816 419 28.6 426 16 7 60.0 60.670.5 72.5539.8597 51
1 1/418 457.2 31.8 465 16 7 66.0 68.078.0 84.3577.8635 52
1 1/420 508 31.8 517 20 7 84.4 86.098.7 103.5635.0698 58
1 3/824 610 34.9 618 20 9 131.4 134149.8 156.5749.3813 71
1 3/828 711 34.9 727 28 9 180.3 183.6- -864.0927 81
1 5/832 813 41.1 829 28 9 269.0 275.5- -978.01060 95
1 5/836 914 41.1 931 32 9 335.8 341.0- -1086.01168 105
mm
Db
MinApprox. Total Weight
incl. Stub End-kg
mm
d5
mm
e
mm S 16 bar L S 20 bar L
No. ofBolt
Holes
K
mmmm mm mm
RatingClass 150 for 16 bar at 75˚C and 20 bar 38˚C to EEMUA Publication No. 145: Section 1.
Material CompositionASTM A 105 (normalised) Unless otherwise specified thesteel flanges will be supplied galvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or chlorinated rubber paint suitable for marine environment.
Backing FlangesForged carbon steel backing flange for use with 90/10 CuNi inner stub end.
Composite Flanges To Suit Stub End
Size d4
in
1 30 30.08 18 108 14536
1 1/4 38 38.10 18 14545
1 1/2 44.5 44.60 19 127
117
14551
572 57.23 19 152 18667
2 1/2 76.1 76.33 19 178 18687
88.93 89.18 21 190 197100
1084 108.38 23 229 247120
3/4 25 25.08 16 98 14531
1/2
5/85/85/83/43/43/43/4
5/8
5/816 16.07 16
60
70
80
99
120
130
158
53
40 89 145
79.4
88.9
98.4
120.6
139.7
152.4
190.5
69.8
60.321
mm
d1
Inner Stub End - Dimensions Outer Steel Flange - Dimensions
d6
Approx.Total
WeightNo. ofBolt
Holesmm
h1
mm
b
mm
K
mm
38
47
53
69
89
103
123
33
23
d5
mm
15.9
15.9
15.9
19.0
19.0
19.0
19.0
15.9
15.9
mm
d2
mm
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
e
mm
0.92
1.10
1.30
2.20
3.00
3.50
6.00
0.75
0.61
kg
D
mm
h2
mmmm mm
RatingClass 150 for 16 bar at 75˚C and 20 bar at 38˚C to EEMUA Publication No. 145: Section 2.
Composite Slip-on (Welded)Forged carbon steel backing flange with 90/10 CU Ni inner stub end.
Material CompositionBacking flange - ASTM A 105 (normalised) Unless otherwise specified the steel flanges will be supplied galvanised to BS EN ISO 1461. If required the galvanised flanges can be further protected with a Polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.
Composite Slip-on Flanges
d2
K
d5D
e
bR=3mmr=3mmd2
K
d5
D
t
bR=3mmr=3mm
d6
h2
h1
d1
d4
r=1mmSquareCorner
23
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
EEMUA 145 - Section 3 EEMUA 145 - Section 3
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030
17 51 38 57 33.03 2.5 8 4 15.9 1.7038
20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5
2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057
27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1
3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9
4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108
6 27 192 159 89 153.00 3.0 8 8 22.2 15.50159
8 31 246 219.1 98 211.10 4.0 8 8 22.2 27.70219.1
10 31 305 267 98 257.97 4.5 8 12 25.4 38.50267
12 35 365 323.9 98 312.83 5.5 8 12 25.4 61.60323.9
16 32 25 52 21.0 2.0 7 4 15.9 1.0425
14 23 16 48 12.0 2.0 8 4 15.9 0.7216
14 41 400 368 99 354.22 6.5 8 12 28.6 86.80368
16 43 457 419 106 404.17 7.0 8 16 28.6 114.20419
18 45 505 457.2 113 441.5 8.0 8 16 31.8 136.00457.2
20 45 559 508 118 490.5 8.5 8 20 31.8 164.60508
24 49 664 610 137 589.5 10.5 8 20 34.9 247.70610
28 72 748 711 145 687.5 12.0 8 28 34.9 453.00711
32 72 876 813 160 786.5 13.5 8 28 41.1 599.00813
36 72 984 914 175 883.5 15.5 8 32 41.1 741.00914
mm
D
mm
b
mm
d6
mm
d3
mm
S1 min
mm
h1
mm
d7
mm
h2
mm
K
mm
d2
mm kg
108
117
127
152
178
190
229
279
343
406
483
98
89
533
597
635
698
813
927
1060
1168
79.4
88.9
98.4
120.6
139.7
152.4
190.5
241.3
298.4
362.0
431.8
69.8
60.3
476.2
539.8
577.8
635.0
749.3
864
978
1086
Approx.Total
Weight
No. ofBolt
Holes
DRILLINGOutside
Diameterof
Flange
Thicknessof
Flange
Thicknessof Hub atWelding
End
Diameterof
Hub
HubDiameterat WeldChamfer
Diameterof BoltCircle
Diameterof BoltHoles
LengthThrough
Hub
ParallelLength
onHub
Boreof
Flange
RatingClass 150 for 16 bar rated at 75˚C to EEMUA Publication No. 145: Section 3.
DimensionsUp to 610mm - based on BS 1560 (ASME B16.5) Class 150. Above 610mm - based on MSS SP-44, Class 150.
16 Bar Solid Weld-NeckSolid weld-neck flange forged from Cu Ni 90/10 standard stock.
Solid Weld-Neck Flanges
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030
17 51 38 57 33.03 2.5 8 4 15.9 1.7038
20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5
2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057
27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1
3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9
4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108
6 27 192 159 89 152.00 3.5 8 8 22.2 15.80159
8 31 246 219.1 98 210.10 4.5 8 8 22.2 28.00219.1
10 31 305 267 98 255.93 5.5 8 12 25.4 39.30267
12 35 365 323.9 98 309.74 7.0 8 12 25.4 62.90323.9
16 32 25 52 21.0 2.0 7 4 15.9 1.0425
14 23 16 48 12.0 2.0 8 4 15.9 0.7216
14 41 400 368 99 351.00 8.0 8 12 28.6 88.40368
16 43 457 419 106 399.84 9.0 8 16 28.6 115.60419
18 45 505 457.2 113 438.5 9.5 8 16 31.8 140.70457.2
20 45 559 508 118 486.5 11.0 8 20 31.8 168.40508
24 49 664 610 137 584.5 13.0 8 20 34.9 253.70610
28 72 748 711 145 681.5 15.0 8 28 34.9 461.10711
32 72 876 813 160 779.5 17.0 8 28 41.1 611.10813
36 72 984 914 175 876.5 19.0 8 32 41.1 755.70914
mm
D
mm
b
mm
d6
mm
d3
mm
S1 min
mm
h1
mm
d7
mm
h2
mm
K
mm
d2
mm kg
108
117
127
152
178
190
229
279
343
406
483
98
89
533
597
635
698
813
927
1060
1168
79.4
88.9
98.4
120.6
139.7
152.4
190.5
241.3
298.4
362.0
431.8
69.8
60.3
476.2
539.8
577.8
635.0
749.3
864
978
1086
Approx.Total
Weight
No. ofBolt
Holes
DRILLINGOutside
Diameterof
Flange
Thicknessof
Flange
Thicknessof Hub atWelding
End
Diameterof
Hub
HubDiameterat WeldChamfer
Diameterof BoltCircle
Diameterof BoltHoles
LengthThrough
Hub
ParallelLength
onHub
Boreof
Flange
RatingClass 150 for 20 bar rated at 38˚C to EEMUA Publication No. 145: Section 3.
DimensionsUp to 610mm - based on BS 1560 (ASME B16.5) Class 150. Above 610mm - based on MSS SP-44, Class 150.
20 Bar Solid Weld-NeckSolid weld-neck flange forged from Cu Ni 90/10 standard stock.
Solid Weld-Neck Flanges
37½º ± 2½º
1.6mm ± 0.8 S1
h2
h1
b
d2
d6d3
d7KD
Square Corner
37½º ± 2½º
1.6mm ± 0.8 S1
h2
h1
b
d2
d6d3
d7KD
Square Corner
24
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
EEMUA 145 - Section 3 EEMUA 145 - Section 3
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030
17 51 38 57 33.03 2.5 8 4 15.9 1.7038
20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5
2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057
27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1
3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9
4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108
6 27 192 159 89 153.00 3.0 8 8 22.2 15.50159
8 31 246 219.1 98 211.10 4.0 8 8 22.2 27.70219.1
10 31 305 267 98 257.97 4.5 8 12 25.4 38.50267
12 35 365 323.9 98 312.83 5.5 8 12 25.4 61.60323.9
16 32 25 52 21.0 2.0 7 4 15.9 1.0425
14 23 16 48 12.0 2.0 8 4 15.9 0.7216
14 41 400 368 99 354.22 6.5 8 12 28.6 86.80368
16 43 457 419 106 404.17 7.0 8 16 28.6 114.20419
18 45 505 457.2 113 441.5 8.0 8 16 31.8 136.00457.2
20 45 559 508 118 490.5 8.5 8 20 31.8 164.60508
24 49 664 610 137 589.5 10.5 8 20 34.9 247.70610
28 72 748 711 145 687.5 12.0 8 28 34.9 453.00711
32 72 876 813 160 786.5 13.5 8 28 41.1 599.00813
36 72 984 914 175 883.5 15.5 8 32 41.1 741.00914
mm
D
mm
b
mm
d6
mm
d3
mm
S1 min
mm
h1
mm
d7
mm
h2
mm
K
mm
d2
mm kg
108
117
127
152
178
190
229
279
343
406
483
98
89
533
597
635
698
813
927
1060
1168
79.4
88.9
98.4
120.6
139.7
152.4
190.5
241.3
298.4
362.0
431.8
69.8
60.3
476.2
539.8
577.8
635.0
749.3
864
978
1086
Approx.Total
Weight
No. ofBolt
Holes
DRILLINGOutside
Diameterof
Flange
Thicknessof
Flange
Thicknessof Hub atWelding
End
Diameterof
Hub
HubDiameterat WeldChamfer
Diameterof BoltCircle
Diameterof BoltHoles
LengthThrough
Hub
ParallelLength
onHub
Boreof
Flange
RatingClass 150 for 16 bar rated at 75˚C to EEMUA Publication No. 145: Section 3.
DimensionsUp to 610mm - based on BS 1560 (ASME B16.5) Class 150. Above 610mm - based on MSS SP-44, Class 150.
16 Bar Solid Weld-NeckSolid weld-neck flange forged from Cu Ni 90/10 standard stock.
Solid Weld-Neck Flanges
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 16 42 30 56 25.00 2.5 8 4 15.9 1.3030
17 51 38 57 33.03 2.5 8 4 15.9 1.7038
20 61 44.5 62 39.53 2.5 7 4 15.9 2.3044.5
2 25 73 57 64 52.16 2.5 9 4 19.0 4.1057
27 91 76.1 70 71.23 2.5 8 4 19.0 6.1076.1
3 27 105 88.9 70 84.08 2.5 8 4 19.0 7.1088.9
4 27 135 108 76 102.13 3.0 8 8 19.0 10.20108
6 27 192 159 89 152.00 3.5 8 8 22.2 15.80159
8 31 246 219.1 98 210.10 4.5 8 8 22.2 28.00219.1
10 31 305 267 98 255.93 5.5 8 12 25.4 39.30267
12 35 365 323.9 98 309.74 7.0 8 12 25.4 62.90323.9
16 32 25 52 21.0 2.0 7 4 15.9 1.0425
14 23 16 48 12.0 2.0 8 4 15.9 0.7216
14 41 400 368 99 351.00 8.0 8 12 28.6 88.40368
16 43 457 419 106 399.84 9.0 8 16 28.6 115.60419
18 45 505 457.2 113 438.5 9.5 8 16 31.8 140.70457.2
20 45 559 508 118 486.5 11.0 8 20 31.8 168.40508
24 49 664 610 137 584.5 13.0 8 20 34.9 253.70610
28 72 748 711 145 681.5 15.0 8 28 34.9 461.10711
32 72 876 813 160 779.5 17.0 8 28 41.1 611.10813
36 72 984 914 175 876.5 19.0 8 32 41.1 755.70914
mm
D
mm
b
mm
d6
mm
d3
mm
S1 min
mm
h1
mm
d7
mm
h2
mm
K
mm
d2
mm kg
108
117
127
152
178
190
229
279
343
406
483
98
89
533
597
635
698
813
927
1060
1168
79.4
88.9
98.4
120.6
139.7
152.4
190.5
241.3
298.4
362.0
431.8
69.8
60.3
476.2
539.8
577.8
635.0
749.3
864
978
1086
Approx.Total
Weight
No. ofBolt
Holes
DRILLINGOutside
Diameterof
Flange
Thicknessof
Flange
Thicknessof Hub atWelding
End
Diameterof
Hub
HubDiameterat WeldChamfer
Diameterof BoltCircle
Diameterof BoltHoles
LengthThrough
Hub
ParallelLength
onHub
Boreof
Flange
RatingClass 150 for 20 bar rated at 38˚C to EEMUA Publication No. 145: Section 3.
DimensionsUp to 610mm - based on BS 1560 (ASME B16.5) Class 150. Above 610mm - based on MSS SP-44, Class 150.
20 Bar Solid Weld-NeckSolid weld-neck flange forged from Cu Ni 90/10 standard stock.
Solid Weld-Neck Flanges
37½º ± 2½º
1.6mm ± 0.8 S1
h2
h1
b
d2
d6d3
d7KD
Square Corner
37½º ± 2½º
1.6mm ± 0.8 S1
h2
h1
b
d2
d6d3
d7KD
Square Corner
25
EEMUA 145 - Section 4 EEMUA 145 - Section 4
SizeFlange
DiameterFlange
Thicknessd3
in
16 89 16.07 14 20 23 4 4 0.6615.9 60.3
25 98 25.08 16 24 32 4 4 0.9115.9 69.8
1 30 108 30.08 16 24 47 4 4 1.1615.9 79.4
38 117 38.10 17 26 51 4 6 1.4015.9 88.9
44.5 127 44.60 20 26 61 4 6 1.9015.9 98.4
76.1 178 76.33 27 32 91 4 6 4.7019.0 139.7
57 152 57.23 25 28 73 4 6 3.3019.0 120.62
88.9 190 89.18 27 34 105 4 6 5.2019.0 152.43
108 229 108.38 27 40 135 8 8 7.7019.0 190.54
mm D mm b mm
No. ofBolt
Holes
Diameter ofBolt Holes
d2 mm
ApproxWeight
kgmm
d6
mm
h
mm
k
mm
r
mm
1/23/4
1 1/4
1 1/2
2 1/2
RatingClass 150 for 16 bar rated systems, (also for use with 20 bar rated systems) to EEMUA Publication No. 145: Section 4.
Dimensions(ASME B16.5) Class 150.
Solid slip-on flange forged from 90/10 CuNi Standard Stock.
Solid Slip-On Flanges
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 108 79.4 15.9 12.7 4 1.3130
117 88.9 15.9 14.3 4 1.5838
127 98.4 15.9 15.9 4 1.944.5
1522 120.6 19.0 17.4 4 3.0157
178 139.7 19.0 20.6 4 4.6876.1
1903 152.4 19.0 22.2 4 5.7088.9
2294 190.5 19.0 22.2 8 8.67108
2796 241.3 22.2 22.2 8 15.46159
3438 298.4 22.2 23.8 8 24.9219.1
40610 362.0 25.4 27.0 12 41.23267
48312 431.8 25.4 30.2 12 70.55323.9
98 69.8 15.9 11.1 4 1.0425
89 60.3 15.9 9.5 4 0.8216
14 533 476.2 28.6 33.3 12 93.16368
16 597 539.8 28.6 34.9 16 123.99419
18 635 577.8 31.8 38.1 16 147.55457.2
20 698 635.0 31.8 41.3 20 191.00508
24 813 749.3 34.9 46.0 20 285.74610
28 927 863.6 34.9 69.4 28 434.66711
32 1060 978.0 41.1 78.8 28 665.63813
36 1168 1085.85
5/85/85/83/43/43/43/47/87/8
1
1
5/8
5/8
1 1/8
1 1/81 1/4
1 1/4
1 3/8
1 3/81 5/8
1 5/8 41.1 88.4 32 886.43914
mm
FlangeDiameter
D
Diameterof Disk
d4
FlangeThickness
b min
d2Dia. of Bolt
Holes
mm
K
mm in mm mm mm mm
Approx.Total
WeightNo. ofBolt
Holes
60
70
80
99
120
130
158
212
270
320
370
50
40
430
482
530
585
685
800
905
1000
BlindBlind steel outer flange, A 105.
Disk90/10 copper nickel.
DimensionsFlange:Up to 610mm - Based on BS 1560 (ASME B16.5) Class 150. Above 610mm - on MSS-SP-44, Class 150.
Spectacle, Ring and Blind Spade FlangesSpectacle, Ring and Blind Spade Flanges clad with 90/10 copper-nickel-iron are available insizes up to and including 36”/914mm for Class 150, 16 bar and 20 bar.
Composite Blind Flanges
Material CompositeFlange: Forged carbon steel to ASTM A 105 (normalised). Unless otherwise specified the steel flanges will be supplied galvanised to (BS729/BS EN ISO 1461). If required the galvanised flanges can be further protected with polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.
RatingClass 150 for 16 bar rated systems for temperatures up to and including 75˚C and 20 bar rated systems up to 38˚C.
d2
d6
SquareCorner
d3
K
D
bh
r
d2
d4
b
h3=5mm
K
D
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel26
EEMUA 145 - Section 4 EEMUA 145 - Section 4
SizeFlange
DiameterFlange
Thicknessd3
in
16 89 16.07 14 20 23 4 4 0.6615.9 60.3
25 98 25.08 16 24 32 4 4 0.9115.9 69.8
1 30 108 30.08 16 24 47 4 4 1.1615.9 79.4
38 117 38.10 17 26 51 4 6 1.4015.9 88.9
44.5 127 44.60 20 26 61 4 6 1.9015.9 98.4
76.1 178 76.33 27 32 91 4 6 4.7019.0 139.7
57 152 57.23 25 28 73 4 6 3.3019.0 120.62
88.9 190 89.18 27 34 105 4 6 5.2019.0 152.43
108 229 108.38 27 40 135 8 8 7.7019.0 190.54
mm D mm b mm
No. ofBolt
Holes
Diameter ofBolt Holes
d2 mm
ApproxWeight
kgmm
d6
mm
h
mm
k
mm
r
mm
1/23/4
1 1/4
1 1/2
2 1/2
RatingClass 150 for 16 bar rated systems, (also for use with 20 bar rated systems) to EEMUA Publication No. 145: Section 4.
Dimensions(ASME B16.5) Class 150.
Solid slip-on flange forged from 90/10 CuNi Standard Stock.
Solid Slip-On Flanges
Size
in
1/23/4
1 1/41 1/2
2 1/2
1 108 79.4 15.9 12.7 4 1.3130
117 88.9 15.9 14.3 4 1.5838
127 98.4 15.9 15.9 4 1.944.5
1522 120.6 19.0 17.4 4 3.0157
178 139.7 19.0 20.6 4 4.6876.1
1903 152.4 19.0 22.2 4 5.7088.9
2294 190.5 19.0 22.2 8 8.67108
2796 241.3 22.2 22.2 8 15.46159
3438 298.4 22.2 23.8 8 24.9219.1
40610 362.0 25.4 27.0 12 41.23267
48312 431.8 25.4 30.2 12 70.55323.9
98 69.8 15.9 11.1 4 1.0425
89 60.3 15.9 9.5 4 0.8216
14 533 476.2 28.6 33.3 12 93.16368
16 597 539.8 28.6 34.9 16 123.99419
18 635 577.8 31.8 38.1 16 147.55457.2
20 698 635.0 31.8 41.3 20 191.00508
24 813 749.3 34.9 46.0 20 285.74610
28 927 863.6 34.9 69.4 28 434.66711
32 1060 978.0 41.1 78.8 28 665.63813
36 1168 1085.85
5/85/85/83/43/43/43/47/87/8
1
1
5/8
5/8
1 1/8
1 1/81 1/4
1 1/4
1 3/8
1 3/81 5/8
1 5/8 41.1 88.4 32 886.43914
mm
FlangeDiameter
D
Diameterof Disk
d4
FlangeThickness
b min
d2Dia. of Bolt
Holes
mm
K
mm in mm mm mm mm
Approx.Total
WeightNo. ofBolt
Holes
60
70
80
99
120
130
158
212
270
320
370
50
40
430
482
530
585
685
800
905
1000
BlindBlind steel outer flange, A 105.
Disk90/10 copper nickel.
DimensionsFlange: Up to 610mm - Based on BS 1560 (ASME B16.5) Class 150. Above 610mm - on MSS-SP-44, Class 150.
Spectacle, Ring and Blind Spade FlangesSpectacle, Ring and Blind Spade Flanges clad with 90/10 copper-nickel-iron are available in sizes up to and including 36”/914mm for Class 150, 16 bar and 20 bar.
Composite Blind Flanges
Material CompositeFlange: Forged carbon steel to ASTM A 105 (normalised). Unless otherwise specified the steel flanges will be supplied galvanised to (BS729/BS EN ISO 1461). If required the galvanised flanges can be further protected with polymide epoxy type paint or a chlorinated rubber paint suitable for marine environments.
RatingClass 150 for 16 bar rated systems for temperatures up to and including 75˚C and 20 bar rated systems up to 38˚C.
d2
d6
SquareCorner
d3
K
D
bh
r
d2
d4
b
h3=5mm
K
D
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 27
EEMUA 146 - Section 1 EEMUA 146 - Section 1
Nominal Size
in
1 1/41 1/2
2 1/2
1 2.5 3830
2.5 4838
2.5 5744.5
2 2.5 6457
2.5 7676.1
3 2.5 8688.9
4 3.0 105108
6 3.0 143159
8 4.0 178219.1
10 4.5 216267
12 5.5 254323.9
14 6.5 279368
16 7.0 305419
18 8.0 343457.2
20 8.5 381508
24 10.5 432610
28 12.0 521711
32 13.5 597813
36 15.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.5
4.5
5.5
7.0
8.0
9.0
9.5
11.0
13.0
15.0
17.0
19.0 673
40
50
59
66
78
88
107
145
180
218
257
282
308
346
384
435
524
602
678
36
46
55
62
74
84
103
141
176
214
251
276
302
340
378
429
518
592
668914
Pipe size a=b
nommax minmm mm mm
16 bar 20 bar
Pipe Wall Thickness (†)
DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75˚C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38˚C.
Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspectionto ASME Code Section VIII. UW51.
Tee Pieces I Equal Tee Pieces
ElbowSize
mm
2.5 2944.5
2.5 3557
2.5 4476.1
2.5 5188.9
3.0 64108
3.0 95159
4.0 127219.1
4.5 159267
5.5 190323.9
6.5 222368
7.0 254419
8.0 286457.2
8.5 318508
10.5 381610
12.0 438711
13.5 502813
15.5
2.5
2.5
2.5
2.5
3.0
3.5
4.5
5.5
7.0
8.0
9.0
9.5
11.0
13.0
15.0
17.0
19.0 565
27
33
42
49
62
93
125
157
187
219
251
283
315
378
435
497
560
31
37
46
53
66
97
129
161
193
225
257
289
321
384
441
507
570
57
76
95
114
152
229
305
381
457
533
610
686
762
914
1067
1219
1372
55
74
93
112
150
227
303
379
454
530
607
683
759
911
1064
1214
1367
59
78
97
116
154
231
307
383
460
536
613
689
765
917
1070
1224
1377
0.15
0.25
0.45
0.65
1.0
2.3
6.0
10
17
27
38
54
71
126
197
289
420
0.15
0.25
0.45
0.65
1.0
2.7
6.5
12
23
34
50
64
92
156
245
362
513
0.30
0.52
0.90
1.25
2.10
4.70
12
20
35
55
77
109
142
252
394
579
841
0.30
0.52
0.90
1.25
2.10
5.50
13
24
45
67
99
128
184
312
490
725
1026914
16 bar 20 bar
mm mm mm mm mm mm kg kg
90˚45˚
nomnom
mm
max
mm
min
mm
max
mm
min45˚
16 bar45˚
20 bar90˚
16 bar90˚
20 bar
E-Centre to FaceSpecifiedPipe Thickness T Approx. Weight
RadiusNominally 1.5 x OD - Based on ASME B16.9 and complying with EEMUA Publication No. 146: Section 1.
One-piece / Welded Half Shells Construction.Elbows for pipes up to and including 267mm size are normally supplied as seamless.
Elbows for larger diameter pipes are made from half shells, longitudinally welded. 45˚ and 90˚ elbows are available in all sizes.
Butt Weld Elbows (Long Radius)
Weld PreparationWall thickness † and †1 of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Weld Inspection100% radiographic inspection to ASME Code, Section VIII. UW51.
t
t
b
aa
E t
T
IDE
E
ID
E t
t = intrados thickness (mlm)in accordance with EEMUAPublication No.146 Section 1
T
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel30
EEMUA 146 - Section 1 EEMUA 146 - Section 1
Nominal Size
in
1 1/41 1/2
2 1/2
1 2.5 3830
2.5 4838
2.5 5744.5
2 2.5 6457
2.5 7676.1
3 2.5 8688.9
4 3.0 105108
6 3.0 143159
8 4.0 178219.1
10 4.5 216267
12 5.5 254323.9
14 6.5 279368
16 7.0 305419
18 8.0 343457.2
20 8.5 381508
24 10.5 432610
28 12.0 521711
32 13.5 597813
36 15.5
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.5
4.5
5.5
7.0
8.0
9.0
9.5
11.0
13.0
15.0
17.0
19.0 673
40
50
59
66
78
88
107
145
180
218
257
282
308
346
384
435
524
602
678
36
46
55
62
74
84
103
141
176
214
251
276
302
340
378
429
518
592
668914
Pipe size a=b
nommax minmm mm mm
16 bar 20 bar
Pipe Wall Thickness (†)
DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75˚C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38˚C.
Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspection to ASME Code Section VIII. UW51.
Tee Pieces I Equal Tee Pieces
ElbowSize
mm
2.5 2944.5
2.5 3557
2.5 4476.1
2.5 5188.9
3.0 64108
3.0 95159
4.0 127219.1
4.5 159267
5.5 190323.9
6.5 222368
7.0 254419
8.0 286457.2
8.5 318508
10.5 381610
12.0 438711
13.5 502813
15.5
2.5
2.5
2.5
2.5
3.0
3.5
4.5
5.5
7.0
8.0
9.0
9.5
11.0
13.0
15.0
17.0
19.0 565
27
33
42
49
62
93
125
157
187
219
251
283
315
378
435
497
560
31
37
46
53
66
97
129
161
193
225
257
289
321
384
441
507
570
57
76
95
114
152
229
305
381
457
533
610
686
762
914
1067
1219
1372
55
74
93
112
150
227
303
379
454
530
607
683
759
911
1064
1214
1367
59
78
97
116
154
231
307
383
460
536
613
689
765
917
1070
1224
1377
0.15
0.25
0.45
0.65
1.0
2.3
6.0
10
17
27
38
54
71
126
197
289
420
0.15
0.25
0.45
0.65
1.0
2.7
6.5
12
23
34
50
64
92
156
245
362
513
0.30
0.52
0.90
1.25
2.10
4.70
12
20
35
55
77
109
142
252
394
579
841
0.30
0.52
0.90
1.25
2.10
5.50
13
24
45
67
99
128
184
312
490
725
1026914
16 bar 20 bar
mm mm mm mm mm mm kg kg
90˚45˚
nomnom
mm
max
mm
min
mm
max
mm
min45˚
16 bar45˚
20 bar90˚
16 bar90˚
20 bar
E-Centre to FaceSpecifiedPipe Thickness T Approx. Weight
RadiusNominally 1.5 x OD - Based on ASME B16.9 and complying with EEMUA Publication No. 146: Section 1.
One-piece / Welded Half ShellsConstruction.Elbows for pipes up to and including 267mm size are normally supplied asseamless.
Elbows for larger diameter pipes are made from half shells, longitudinally welded. 45˚ and 90˚ elbows are available in all sizes.
Butt Weld Elbows (Long Radius)
Weld PreparationWall thickness † and †1 of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Weld Inspection100% radiographic inspection to ASME Code, Section VIII. UW51.
t
t
b
aa
E t
T
IDE
E
ID
E t
t = intrados thickness (mlm)in accordance with EEMUAPublication No.146 Section 1
T
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 31
EEMUA 146 - Section 1 EEMUA 146 - Section 1
Size
mm mm mm mm mm mm MinMax Nom Max
OUTLET bRun a
Centre-to-end (mm)
Nom Min
Pipe Wall Thickness (†)
38
44.5
5757
44.544.5
3038
5776.176.176.188.988.988.9108108108159159159
219.1
267
323.9267
267219.1
219.1
323.9323.9
38
44.5
5757
44.544.5
3038
5776.176.176.188.988.988.9108108108159159159
219.1
267
323.9267
267219.1
219.1
323.9323.9
25
25
3844.5
3038
2530
3057
44.538
76.157
44.588.976.157
10888.976.1
108
159
267108
219.188.9
159
219.1159
2.5
2.5
2.52.5
2.52.5
2.52.5
2.52.52.52.52.52.52.53.03.03.03.03.03.0
4.0
4.5
5.54.5
4.54.0
4.0
5.55.5
2.5
2.5
2.52.5
2.52.5
2.52.5
2.52.52.52.52.52.52.53.03.03.03.03.03.0
4.0
4.5
5.54.5
4.54.0
4.0
5.55.5
2.0
2.0
2.52.5
2.52.5
2.02.5
2.52.52.52.52.52.52.52.52.52.53.02.52.5
3.0
3.0
4.53.0
4.02.5
3.0
4.03.0
50
59
6666
5959
4050
66787878888888107107107145145145
180
218
257218
218180
180
257257
50
59
5962
5959
4050
53726966857875
1009791
132126123
158
196
244186
205154
170
232222
48
57
6464
5757
3848
64767676868686105105105143143143
178
216
254216
216178
178
254254
48
57
5760
5757
3848
51706764837673989589130124121
156
194
241184
203152
168
229219
46
55
6262
5555
3646
62747474848484103103103141141141
176
214
251214
214176
176
251251
46
55
5558
5555
3646
49686562817471969387128122119
154
192
238182
201150
166
226216
x x x x
DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75˚C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38˚C. are as stated in Equal Tee columns.
Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspection to ASME Code Section VIII. UW51.
Tee Pieces I Reducing Tee Pieces
(Forward)
Size
mm mm mm mm mm mm MinMax Nom Max
OUTLET bRun a
Centre-to-end (mm)
Nom Min
Pipe Wall Thickness (†)
368368368419419419
457.2457.2457.2508508508
610
711711
610610
711813813813914914914
368368368419419419
457.2457.2457.2508508508
610
711711
610610
711813813813914914914
323.9267
219.1368
323.9267419368
323.9457.2419368
419
508610
457.2508
457.2711610508813711610
6.56.56.57.07.07.08.08.08.08.58.58.5
10.5
12.012.0
10.510.5
12.013.513.513.515.515.515.5
6.56.56.57.07.07.08.08.08.08.58.58.5
10.5
12.012.0
10.510.5
12.013.513.513.515.515.515.5
5.54.54.06.55.54.57.06.55.58.07.06.5
7.0
8.510.5
8.08.5
8.012.010.58.513.512.010.5
282282282308308308346346346384384384
435
524524
435435
524602602602678678678
273260251308298286333333324371359359
409
486511
422435
473577564538653627615
279279279305305305343343343381381381
432
521521
432432
521597597597673673673
270257248305295283330330321368356356
406
483508
419432
470572559533648622610
276276276302302302340340340378378378
429
518518
429429
518592592592668668668
267254245302292280327327318365353353
403
480505
416429
467567554528643617605
x x x x
t
t b
aa
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel32
EEMUA 146 - Section 1 EEMUA 146 - Section 1
Size
mm mm mm mm mm mm MinMax Nom Max
OUTLET bRun a
Centre-to-end (mm)
Nom Min
Pipe Wall Thickness (†)
38
44.5
5757
44.544.5
3038
5776.176.176.188.988.988.9108108108159159159
219.1
267
323.9267
267219.1
219.1
323.9323.9
38
44.5
5757
44.544.5
3038
5776.176.176.188.988.988.9108108108159159159
219.1
267
323.9267
267219.1
219.1
323.9323.9
25
25
3844.5
3038
2530
3057
44.538
76.157
44.588.976.157
10888.976.1
108
159
267108
219.188.9
159
219.1159
2.5
2.5
2.52.5
2.52.5
2.52.5
2.52.52.52.52.52.52.53.03.03.03.03.03.0
4.0
4.5
5.54.5
4.54.0
4.0
5.55.5
2.5
2.5
2.52.5
2.52.5
2.52.5
2.52.52.52.52.52.52.53.03.03.03.03.03.0
4.0
4.5
5.54.5
4.54.0
4.0
5.55.5
2.0
2.0
2.52.5
2.52.5
2.02.5
2.52.52.52.52.52.52.52.52.52.53.02.52.5
3.0
3.0
4.53.0
4.02.5
3.0
4.03.0
50
59
6666
5959
4050
66787878888888107107107145145145
180
218
257218
218180
180
257257
50
59
5962
5959
4050
53726966857875
1009791
132126123
158
196
244186
205154
170
232222
48
57
6464
5757
3848
64767676868686105105105143143143
178
216
254216
216178
178
254254
48
57
5760
5757
3848
51706764837673989589130124121
156
194
241184
203152
168
229219
46
55
6262
5555
3646
62747474848484103103103141141141
176
214
251214
214176
176
251251
46
55
5558
5555
3646
49686562817471969387128122119
154
192
238182
201150
166
226216
x x x x
DimensionsBased on EEMUA Publication No. 146: Section 1, for 16 bar rated systems operating at temperatures up to and including 75˚C, also Tees suitable for 20 bar rated systems operating at temperatures up to and including 38˚C. are as stated in Equal Tee columns.
Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.Seamless up to and including 219mm welded from 267-914 mm OD with 100% radiographic inspectionto ASME Code Section VIII. UW51.
Tee Pieces I Reducing Tee Pieces
(Forward)
Size
mm mm mm mm mm mm MinMax Nom Max
OUTLET bRun a
Centre-to-end (mm)
Nom Min
Pipe Wall Thickness (†)
368368368419419419
457.2457.2457.2508508508
610
711711
610610
711813813813914914914
368368368419419419
457.2457.2457.2508508508
610
711711
610610
711813813813914914914
323.9267
219.1368
323.9267419368
323.9457.2419368
419
508610
457.2508
457.2711610508813711610
6.56.56.57.07.07.08.08.08.08.58.58.5
10.5
12.012.0
10.510.5
12.013.513.513.515.515.515.5
6.56.56.57.07.07.08.08.08.08.58.58.5
10.5
12.012.0
10.510.5
12.013.513.513.515.515.515.5
5.54.54.06.55.54.57.06.55.58.07.06.5
7.0
8.510.5
8.08.5
8.012.010.58.513.512.010.5
282282282308308308346346346384384384
435
524524
435435
524602602602678678678
273260251308298286333333324371359359
409
486511
422435
473577564538653627615
279279279305305305343343343381381381
432
521521
432432
521597597597673673673
270257248305295283330330321368356356
406
483508
419432
470572559533648622610
276276276302302302340340340378378378
429
518518
429429
518592592592668668668
267254245302292280327327318365353353
403
480505
416429
467567554528643617605
x x x x
t
t b
aa
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 33
EEMUA 146 - Section 1 EEMUA 146 - Section 1
DimensionsComply with EEMUA Publication No. 146 Section 1.
TypeEccentric reducers are either one-piece or fabricated welded construction.
Reducers I Eccentric
Weld PreparationWall thickness † and †1 of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Inspection of Welds100% radiographic inspection to ASME Code Section VIII. UW51.
DimensionsComply with EEMUA Publication No. 146 Section 1.
TypeConcentric reducers are either one-piece or fabricated welded construction.
Reducers I Concentric
Weld PreparationWall thickness † and †1 of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Inspection of Welds100% radiographic inspection to ASME Code Section VIII. UW51.
NoteReducers in sizes smaller than 57mm are available on request.
323.9 x 267
368 x 219.1
368 x 267
368 x 323.9
419 x 267
419 x 323.9
419 x 368
457.2 x 323.9
457.2 x 368
457.2 x 419
508 x 368
508 x 419
508 x 457.2
610 x 419
610 x 457.2
610 x 508
711 x 457.2
711 x 508
711 x 610
813 x 610
813 x 711
203
330
330
330
356
356
356
381
381
381
508
508
508
508
508
508
610
610
610
610
610
511
511
511
511
511
511
613
613
613
615
615
505
505
505
505
505
505
607
607
607
605
605
9.38
17.24
18.68
20.39
23.44
25.43
26.97
32.65
34.53
36.71
51.93
55.01
57.32
75.27
78.13
81.92
117.26
122.46
132.96
160.94
172.59
11.87
21.50
23.00
25.00
30.00
32.50
34.50
39.00
41.00
43.50
67.00
71.00
74.00
93.00
96.50
101.00
-
-
-
-
-
5.5 x 4.5
6.5 x 4.0
6.5 x 4.5
6.5 x 5.5
7.0 x 4.5
7.0 x 5.5
7.0 x 6.5
8.0 x 5.5
8.0 x 6.5
8.0 x 7.0
8.5 x 6.5
8.5 x 7.0
8.5 x 8.0
10.5 x 7.0
10.5 x 8.0
10.5 x 8.5
12.0 x 8.0
12.0 x 8.5
12.0 x 10.5
13.5 x 10.5
13.5 x 12.0
7.0 x 5.5
8.0 x 4.5
8.0 x 5.5
8.0 x 7.0
9.0 x 5.5
9.0 x 7.0
9.0 x 8.0
9.5 x 7.0
9.5 x 8.0
9.5 x 9.0
11.0 x 8.0
11.0 x 9.0
11.0 x 9.5
13.0 x 9.0
13.0 x 9.5
13.0 x 11.0
-
-
-
-
-
Pipe Size
in
57 x 38
57 x 44.5
88.9 x 57
57 x 30
76.1 x 57
88.9 x 76.1
108 x 57
108 x 76.1
108 x 88.9
159 x 57
159 x 76.1
159 x 88.9
159 x 108
219.1 x 76.1
219.1 x 88.9
219.1 x 108
219.1 x 159
267 x 108
267 x 159
267 x 219.1
323.9 x 159
323.9 x 219.1
76
76
89
76
89
89
102
102
102
140
140
140
140
152
152
152
152
178
178
178
203
203
0.29
0.29
0.44
0.29
0.40
0.50
0.67
0.75
0.80
1.32
1.44
1.52
1.64
2.49
2.60
2.77
3.21
4.84
5.52
6.31
7.63
8.60
0.29
0.29
0.44
0.29
0.40
0.50
0.67
0.75
0.80
1.54
1.68
1.77
1.91
2.79
2.92
3.11
3.60
5.89
6.71
7.68
9.65
10.89
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 3.0
4.0 x 2.5
4.0 x 2.5
4.0 x 3.0
4.0 x 3.0
4.5 x 3.0
4.5 x 3.0
4.5 x 4.0
5.5 x 3.0
5.5 x 4.0
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.5 x 2.5
3.5 x 2.5
3.5 x 2.5
3.5 x 3.0
4.5 x 2.5
4.5 x 2.5
4.5 x 3.0
4.5 x 3.5
5.5 x 3.0
5.5 x 3.5
5.5 x 4.5
7.0 x 3.5
7.0 x 4.5
Length H
mm mm mm kgkg
16 barnom
206
333
333
333
359
359
359
384
384
384
78
78
91
78
91
91
104
104
104
142
142
142
142
154
154
154
154
180
180
180
206
206
mm
max
200
327
327
327
353
353
353
378
378
378
74
74
87
74
87
87
100
100
100
138
138
138
138
150
150
150
150
176
176
176
200
200
mm
min 20 bar
Specified Wall Thickness †1 x †
16 bar 20 bar
Approx Weight
Building-in dimensions for Concentric And Eccentric Reducers (mm)
H
t1
t
t
t1
H
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel34
EEMUA 146 - Section 1 EEMUA 146 - Section 1
DimensionsComply with EEMUA Publication No. 146Section 1.
TypeEccentric reducers are either one-piece orfabricated welded construction.
Reducers I Eccentric
Weld PreparationWall thickness † and †1 of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Inspection of Welds100% radiographic inspection to ASME Code Section VIII. UW51.
DimensionsComply with EEMUA Publication No. 146Section 1.
TypeConcentric reducers are either one-piece orfabricated welded construction.
Reducers I Concentric
Weld PreparationWall thickness † and †1 of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Inspection of Welds100% radiographic inspection to ASME Code Section VIII. UW51.
NoteReducers in sizes smaller than 57mm are available on request.
323.9 x 267
368 x 219.1
368 x 267
368 x 323.9
419 x 267
419 x 323.9
419 x 368
457.2 x 323.9
457.2 x 368
457.2 x 419
508 x 368
508 x 419
508 x 457.2
610 x 419
610 x 457.2
610 x 508
711 x 457.2
711 x 508
711 x 610
813 x 610
813 x 711
203
330
330
330
356
356
356
381
381
381
508
508
508
508
508
508
610
610
610
610
610
511
511
511
511
511
511
613
613
613
615
615
505
505
505
505
505
505
607
607
607
605
605
9.38
17.24
18.68
20.39
23.44
25.43
26.97
32.65
34.53
36.71
51.93
55.01
57.32
75.27
78.13
81.92
117.26
122.46
132.96
160.94
172.59
11.87
21.50
23.00
25.00
30.00
32.50
34.50
39.00
41.00
43.50
67.00
71.00
74.00
93.00
96.50
101.00
-
-
-
-
-
5.5 x 4.5
6.5 x 4.0
6.5 x 4.5
6.5 x 5.5
7.0 x 4.5
7.0 x 5.5
7.0 x 6.5
8.0 x 5.5
8.0 x 6.5
8.0 x 7.0
8.5 x 6.5
8.5 x 7.0
8.5 x 8.0
10.5 x 7.0
10.5 x 8.0
10.5 x 8.5
12.0 x 8.0
12.0 x 8.5
12.0 x 10.5
13.5 x 10.5
13.5 x 12.0
7.0 x 5.5
8.0 x 4.5
8.0 x 5.5
8.0 x 7.0
9.0 x 5.5
9.0 x 7.0
9.0 x 8.0
9.5 x 7.0
9.5 x 8.0
9.5 x 9.0
11.0 x 8.0
11.0 x 9.0
11.0 x 9.5
13.0 x 9.0
13.0 x 9.5
13.0 x 11.0
-
-
-
-
-
Pipe Size
in
57 x 38
57 x 44.5
88.9 x 57
57 x 30
76.1 x 57
88.9 x 76.1
108 x 57
108 x 76.1
108 x 88.9
159 x 57
159 x 76.1
159 x 88.9
159 x 108
219.1 x 76.1
219.1 x 88.9
219.1 x 108
219.1 x 159
267 x 108
267 x 159
267 x 219.1
323.9 x 159
323.9 x 219.1
76
76
89
76
89
89
102
102
102
140
140
140
140
152
152
152
152
178
178
178
203
203
0.29
0.29
0.44
0.29
0.40
0.50
0.67
0.75
0.80
1.32
1.44
1.52
1.64
2.49
2.60
2.77
3.21
4.84
5.52
6.31
7.63
8.60
0.29
0.29
0.44
0.29
0.40
0.50
0.67
0.75
0.80
1.54
1.68
1.77
1.91
2.79
2.92
3.11
3.60
5.89
6.71
7.68
9.65
10.89
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 3.0
4.0 x 2.5
4.0 x 2.5
4.0 x 3.0
4.0 x 3.0
4.5 x 3.0
4.5 x 3.0
4.5 x 4.0
5.5 x 3.0
5.5 x 4.0
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
2.5 x 2.5
3.0 x 2.5
3.0 x 2.5
3.0 x 2.5
3.5 x 2.5
3.5 x 2.5
3.5 x 2.5
3.5 x 3.0
4.5 x 2.5
4.5 x 2.5
4.5 x 3.0
4.5 x 3.5
5.5 x 3.0
5.5 x 3.5
5.5 x 4.5
7.0 x 3.5
7.0 x 4.5
Length H
mm mm mm kgkg
16 barnom
206
333
333
333
359
359
359
384
384
384
78
78
91
78
91
91
104
104
104
142
142
142
142
154
154
154
154
180
180
180
206
206
mm
max
200
327
327
327
353
353
353
378
378
378
74
74
87
74
87
87
100
100
100
138
138
138
138
150
150
150
150
176
176
176
200
200
mm
min 20 bar
Specified Wall Thickness †1 x †
16 bar 20 bar
Approx Weight
Building-in dimensions for Concentric And Eccentric Reducers (mm)
H
t1
t
t
t1
H
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 35
EEMUA 146 - Section 1 EEMUA 146 - Section 2, 3 & 5
NominalSize
in
1 1/41 1/2
2 1/2
1 2.25 0.0330
2.25 0.0538
2.25 0.0844.5
2 2.25 0.1157
2.25 0.1876.1
3 2.25 0.2488.9
4 2.70 0.40108
6 2.63 0.80159
8 3.54 2.0219.1
10 4.29 3.4267
12 5.24 5.9323.9
14 5.90 9.1368
16 6.73 12.4419
18 7.33 17.6457.2
20 8.15 22.7508
24 9.81 39.2610
28 11.5 61.8711
32 13.17 90.5813
36 14.81
16.0
17.5
19.6
22.0
25.7
28.2
31.7
41
55
69
80
93
102
119
129
148
176
200
221 132.2
0.03
0.05
0.08
0.11
0.18
0.24
0.40
0.97
2.40
4.10
7.70
11.90
16.90
20.90
30.80
51.60
81.40
117.40
166.20914
SpecifiedSize 20 bar
mm
4.5
5.7
7.6
8.9
11
16
22
27
32
37
42
46
51
61
71
81
91
R1 min
mm
44.5
57
76.1
88.9
108
159
219.1
267
323.9
368
419
457.2
508
610
711
813
914
R2 max
mm mm mm
h1 + h2
16.0
17.5
19.6
22.0
25.7
28.2
31.7
44
60
69
85
103
112
119
139
163
191
210
231
mm kg
16 bar
kg
h1 + h2
16 bar 20 bar Approx. Weight
† min
2.25
2.25
2.25
2.25
2.25
2.25
2.70
3.12
4.29
5.23
6.34
7.21
8.21
8.97
9.96
11.96
13.97
15.97
17.96
mm
† min
DimensionsComply with EEMUA Publication No. 146 Section 1 : with added compensatory thickness over and above the minimum pipe wall thickness.
The knuckle radius, and dished end radius R1 (min) & R2 (max) respectively comply with the requirements of the EEMUA Publication.
Butt Weld End CapsWeld PreparationWall thickness of 3mm and greater are chamfered 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
30
38
44.5
57
25
16
13
13
13
16
13
10
30
30
31
38
30
23
mmmm mm
Socket DepthLengthFitting Size
1. STRAIGHT COUPLING
38 x 16
38 x 25
38 x 30
44.5 x 16
30 x 25
30 x 16
44.5 x 30
44.5 x 38
57 x 16
57 x 25
44.5 x 25
57 x 30
57 x 38
57 x 44.5
32
32
32
38
31
31
34
34
45
45
36
42
40
40
13 x 10
13 x 13
13 x 13
13 x 10
13 x 13
13 x 10
13 x 13
13 x 13
16 x 10
16 x 13
13 x 13
16 x 13
16 x 13
16 x 13
mmmm mm
Socket DepthLengthFitting Size
1.R. REDUCING COUPLING
3/4 " x 16 mm
3/4 " x 25 mm
1" x 25 mm
1" x 30 mm
11/2 " x 44.5 mm
2" x 44.5 mm
Type 2
1/2 " x 25 mm
1/2 " x 30 mm
1/2 " x 38 mm
3/4 " x 30 mm
1/2 " x 16 mm
Type 1
3/4 " x 38 mm
1" x 38 mm
1" x 44.5 mm
11/2 " x 57 mm
10
13
13
13
3
13
13
13
13
13
10
13
13
13
16
36
36
46
46
60
70
36
36
46
36
30
46
46
55
65
43
45
47
47
51
53
2" x 57 mm 167056
43
43
43
45
40
45
48
48
51
mm mm
Socket DepthLength
mm
AFFitting Size
2. FEMALE CONNECTOR
FITTING API, NPT OR BSP AS REQUESTED
Section 2 & 3
Section 2 & 3
Section 2, 3 & 5
t
R1
h2h1
R2
1. STRAIGHT COUPLING16mm - 57mm, N or NS
2. FEMALE CONNECTORFemale thread, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
2. STRAIGHT FEMALE CONNECTORFemale thread, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
1R. REDUCING COUPLING16mm - 57mm, N or NS
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel36
EEMUA 146 - Section 1 EEMUA 146 - Section 2, 3 & 5
NominalSize
in
1 1/41 1/2
2 1/2
1 2.25 0.0330
2.25 0.0538
2.25 0.0844.5
2 2.25 0.1157
2.25 0.1876.1
3 2.25 0.2488.9
4 2.70 0.40108
6 2.63 0.80159
8 3.54 2.0219.1
10 4.29 3.4267
12 5.24 5.9323.9
14 5.90 9.1368
16 6.73 12.4419
18 7.33 17.6457.2
20 8.15 22.7508
24 9.81 39.2610
28 11.5 61.8711
32 13.17 90.5813
36 14.81
16.0
17.5
19.6
22.0
25.7
28.2
31.7
41
55
69
80
93
102
119
129
148
176
200
221 132.2
0.03
0.05
0.08
0.11
0.18
0.24
0.40
0.97
2.40
4.10
7.70
11.90
16.90
20.90
30.80
51.60
81.40
117.40
166.20914
SpecifiedSize 20 bar
mm
4.5
5.7
7.6
8.9
11
16
22
27
32
37
42
46
51
61
71
81
91
R1 min
mm
44.5
57
76.1
88.9
108
159
219.1
267
323.9
368
419
457.2
508
610
711
813
914
R2 max
mm mm mm
h1 + h2
16.0
17.5
19.6
22.0
25.7
28.2
31.7
44
60
69
85
103
112
119
139
163
191
210
231
mm kg
16 bar
kg
h1 + h2
16 bar 20 bar Approx. Weight
† min
2.25
2.25
2.25
2.25
2.25
2.25
2.70
3.12
4.29
5.23
6.34
7.21
8.21
8.97
9.96
11.96
13.97
15.97
17.96
mm
† min
DimensionsComply with EEMUA Publication No. 146 Section 1 : with added compensatory thickness over and above the minimum pipe wall thickness.
The knuckle radius, and dished end radius R1 (min) & R2 (max) respectively comply with the requirements of the EEMUA Publication.
Butt Weld End CapsWeld PreparationWall thickness of 3mm and greater are chamfered 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
30
38
44.5
57
25
16
13
13
13
16
13
10
30
30
31
38
30
23
mmmm mm
Socket DepthLengthFitting Size
1. STRAIGHT COUPLING
38 x 16
38 x 25
38 x 30
44.5 x 16
30 x 25
30 x 16
44.5 x 30
44.5 x 38
57 x 16
57 x 25
44.5 x 25
57 x 30
57 x 38
57 x 44.5
32
32
32
38
31
31
34
34
45
45
36
42
40
40
13 x 10
13 x 13
13 x 13
13 x 10
13 x 13
13 x 10
13 x 13
13 x 13
16 x 10
16 x 13
13 x 13
16 x 13
16 x 13
16 x 13
mmmm mm
Socket DepthLengthFitting Size
1.R. REDUCING COUPLING
3/4 " x 16 mm
3/4 " x 25 mm
1" x 25 mm
1" x 30 mm
1 1/2 " x 44.5 mm
2" x 44.5 mm
Type 2
1/2 " x 25 mm
1/2 " x 30 mm
1/2 " x 38 mm
3/4 " x 30 mm
1/2 " x 16 mm
Type 1
3/4 " x 38 mm
1" x 38 mm
1" x 44.5 mm
1 1/2 " x 57 mm
10
13
13
13
3
13
13
13
13
13
10
13
13
13
16
36
36
46
46
60
70
36
36
46
36
30
46
46
55
65
43
45
47
47
51
53
2" x 57 mm 167056
43
43
43
45
40
45
48
48
51
mm mm
Socket DepthLength
mm
AFFitting Size
2. FEMALE CONNECTOR
FITTING API, NPT OR BSP AS REQUESTED
Section 2 & 3
Section 2 & 3
Section 2, 3 & 5
t
R1
h2h1
R2
1. STRAIGHT COUPLING16mm - 57mm, N or NS
2. FEMALE CONNECTORFemale thread, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
2. STRAIGHT FEMALECONNECTORFemale thread, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
1R. REDUCING COUPLING16mm - 57mm, N or NS
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 37
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 2, 3 & 5
1/2 " x 30 mm
1/2 " x 44.5 mm
1/2 " x 57 mm
3/4 " x 16 mm
3/4 " x 25 mm
3/4 " x 30 mm
3/4 " x 38 mm
3/4 " x 44.5 mm
3/4 " x 57 mm
1" x 16 mm
1" x 25 mm
1/2 " x 25 mm
1/2 " x 16 mm
1" x 30 mm
1" x 44.5 mm
1" x 57 mm
45
451/2 " x 38 mm
50
55
43
45
45
45
50
50
55
45
40
50
50
1" x 38 mm 50
50
55
36
46
50
60
36
36
36
46
50
60
41
30
30
41
41
50
50
60
mm mm
Socket DepthLengthFitting Size
11/4 " x 38 mm
11/4 " x 44.5 mm
11/4 " x 57 mm
11/2 " x 44.5 mm
11/2 " x 57 mm
2" x 44.5 mm
2" x 57 mm
59
63
55
55
55
55
55
70
70
60
60
60
54
60
mm mm
Socket DepthLengthFitting Size
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
7. ADAPTOR - FEMALE THEREAD X MALE INSERTION
1/2 " x 30 mm
1/2 " x 38 mm
3/4 " x 16 mm
3/4 " x 25 mm
3/4 " x 30 mm
3/4 " x 38 mm
1" x 30 mm
1" x 38 mm
1" x 44.5 mm
1" x 57 mm
1 1/4 " x 30 mm
1/2 " x 25 mm
1/2 " x 16 mm
1 1/4 " x 38 mm
1 1/4 " x 44.5 mm
1 1/4 " x 57 mm
1 1/2 " x 44.5 mm
1 1/2 " x 57 mm
2" x 44.5 mm
2" x 57 mm
13
13
10
13
13
13
13
13
16
16
13
13
10
13
13
16
13
16
13
16
38
46
30
38
38
46
38
46
55
65
46
38
27
46
55
65
55
65
65
65
43
43
41
44
44
44
50
50
51
54
52
43
40
52
52
55
53
56
56
59
mm mm
SocketDepthLength
mm
AFFitting Size
38 x 16
38 x 25
44.5 x 16
44.5 x 25
44.5 x 30
57 x 30
Type 2
25 x 16
30 x 25
30 x 38
44.5 x 38
30 x 30
Type 1
57 x 44.5
10
13
10
13
13
13
10
13
13
13
10
13
31
30
35
33
33
38
57 x 38 1338
13
16
17
16
26
21
mmmm mm
SocketDepthLengthFitting Size
RatingTo suit 14-20 bar pressures up to and including 38°C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
3. MALE CONNECTOR 3. REDUCER
Section 2, 3 & 5
Section 2 & 3
Section 2, 3 & 5
7. ADAPTORParallel or taper Female thread x male end for insertion into fitting, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
3. MALE CONNECTORMale thread, 1/2" - 2" Screwed, 16mm - 57mm, N or NS
6. REDUCERLarger end male for insertion into fitting. 16mm - 57mm, N or NS
TYPE 1 TYPE 2
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel38
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 2, 3 & 5
1/2 " x 30 mm
1/2 " x 44.5 mm
1/2 " x 57 mm
3/4 " x 16 mm
3/4 " x 25 mm
3/4 " x 30 mm
3/4 " x 38 mm
3/4 " x 44.5 mm
3/4 " x 57 mm
1" x 16 mm
1" x 25 mm
1/2 " x 25 mm
1/2 " x 16 mm
1" x 30 mm
1" x 44.5 mm
1" x 57 mm
45
451/2 " x 38 mm
50
55
43
45
45
45
50
50
55
45
40
50
50
1" x 38 mm 50
50
55
36
46
50
60
36
36
36
46
50
60
41
30
30
41
41
50
50
60
mm mm
Socket DepthLengthFitting Size
1 1/4 " x 38 mm
1 1/4 " x 44.5 mm
1 1/4 " x 57 mm
1 1/2 " x 44.5 mm
1 1/2 " x 57 mm
2" x 44.5 mm
2" x 57 mm
59
63
55
55
55
55
55
70
70
60
60
60
54
60
mm mm
Socket DepthLengthFitting Size
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
7. ADAPTOR - FEMALE THEREAD X MALE INSERTION
1/2 " x 30 mm
1/2 " x 38 mm
3/4 " x 16 mm
3/4 " x 25 mm
3/4 " x 30 mm
3/4 " x 38 mm
1" x 30 mm
1" x 38 mm
1" x 44.5 mm
1" x 57 mm
11/4 " x 30 mm
1/2 " x 25 mm
1/2 " x 16 mm
11/4 " x 38 mm
11/4 " x 44.5 mm
11/4 " x 57 mm
11/2 " x 44.5 mm
11/2 " x 57 mm
2" x 44.5 mm
2" x 57 mm
13
13
10
13
13
13
13
13
16
16
13
13
10
13
13
16
13
16
13
16
38
46
30
38
38
46
38
46
55
65
46
38
27
46
55
65
55
65
65
65
43
43
41
44
44
44
50
50
51
54
52
43
40
52
52
55
53
56
56
59
mm mm
SocketDepthLength
mm
AFFitting Size
38 x 16
38 x 25
44.5 x 16
44.5 x 25
44.5 x 30
57 x 30
Type 2
25 x 16
30 x 25
30 x 38
44.5 x 38
30 x 30
Type 1
57 x 44.5
10
13
10
13
13
13
10
13
13
13
10
13
31
30
35
33
33
38
57 x 38 1338
13
16
17
16
26
21
mmmm mm
SocketDepthLengthFitting Size
RatingTo suit 14-20 bar pressures up to and including 38°C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
3. MALE CONNECTOR 3. REDUCER
Section 2, 3 & 5
Section 2 & 3
Section 2, 3 & 5
7. ADAPTORParallel or taper Female thread x male end for insertion into fitting, 1/4" - 2" Screwed, 16mm - 57mm, N or NS
3. MALE CONNECTORMale thread, 1/2" - 2" Screwed, 16mm - 57mm, N or NS
6. REDUCERLarger end male for insertion into fitting. 16mm - 57mm, N or NS
TYPE 1 TYPE 2
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 39
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 2, 3 & 5
43
43
41
44
44
44
48
48
48
52
51
43
40
51
53
53
56
56
36
40
27
30
38
40
30
36
40
46
46
30
27
46
50
50
60
65
mm mm
AFLengthFitting Size
1/2 " x 30 mm
1/2 " x 38 mm
3/4 " x 16 mm
3/4 " x 25 mm
3/4 " x 30 mm
3/4 " x 38 mm
1" x 25 mm
1" x 30 mm
1" x 38 mm
1" x 44.5 mm
1 1/4 " x 38 mm
1/2 " x 25 mm
1/2 " x 16 mm
1 1/4 " x 44.5 mm
1 1/2 " x 38 mm
1 1/2" x 44.5 mm
1 1/2 " x 57 mm
2" x 57 mm
30 x 30
38 x 38
44.5 x 44.5
57 x 57
25 x 25
16 x 16
55
65
70
85
50
40
13
13
13
16
13
10
69
69
74
81
63
54
mm mm kg
AF NutLength
55
65
70
85
50
40
mm
AFBody
mm
SocketDepthFitting Size
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
8. ADAPTOR - MALE THEREAD XMALE INSERTION
11. UNION CONNECTOR
13
13
13
16
13
10
37.5
42
51
63.5
37
24.5
mmmm mm
C to FSocket DepthFitting Size
30
38
44.5
57
25
16
13
13
13
16
13
10
mmmm
Socket DepthFitting Size
30
38
44.5
57
25
16
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
12. 90˚ ELBOW 21. 45˚ ELBOW
Section 2, 3 & 5
Section 2 & 3
Section 2 & 3 Section 2 & 3
8. ADAPTORMale thread x male end for insertion into fitting. 1/2" - 2" Screwed, 16mm - 57mm, N or NS
11. UNION CONNECTORRound nose to cone joint. 16mm - 57mm, N or NS
12. ELBOW16mm - 57mm, N or NS
21. OBTUSE ELBOW 45˚16mm - 57mm, N or NS
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel40
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 2, 3 & 5
43
43
41
44
44
44
48
48
48
52
51
43
40
51
53
53
56
56
36
40
27
30
38
40
30
36
40
46
46
30
27
46
50
50
60
65
mm mm
AFLengthFitting Size
1/2 " x 30 mm
1/2 " x 38 mm
3/4 " x 16 mm
3/4 " x 25 mm
3/4 " x 30 mm
3/4 " x 38 mm
1" x 25 mm
1" x 30 mm
1" x 38 mm
1" x 44.5 mm
11/4 " x 38 mm
1/2 " x 25 mm
1/2 " x 16 mm
11/4 " x 44.5 mm
11/2 " x 38 mm
11/2" x 44.5 mm
11/2 " x 57 mm
2" x 57 mm
30 x 30
38 x 38
44.5 x 44.5
57 x 57
25 x 25
16 x 16
55
65
70
85
50
40
13
13
13
16
13
10
69
69
74
81
63
54
mm mm kg
AF NutLength
55
65
70
85
50
40
mm
AFBody
mm
SocketDepthFitting Size
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
8. ADAPTOR - MALE THEREAD X MALE INSERTION
11. UNION CONNECTOR
13
13
13
16
13
10
37.5
42
51
63.5
37
24.5
mmmm mm
C to FSocket DepthFitting Size
30
38
44.5
57
25
16
13
13
13
16
13
10
mmmm
Socket DepthFitting Size
30
38
44.5
57
25
16
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
12. 90˚ ELBOW 21. 45˚ ELBOW
Section 2, 3 & 5
Section 2 & 3
Section 2 & 3 Section 2 & 3
8. ADAPTORMale thread x male end for insertion into fitting. 1/2" - 2" Screwed, 16mm - 57mm, N or NS
11. UNION CONNECTORRound nose to cone joint. 16mm - 57mm, N or NS
12. ELBOW16mm - 57mm, N or NS
21. OBTUSE ELBOW 45˚16mm - 57mm, N or NS
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 41
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 2, 3 & 5
13
13
13
13
13
13
13
13
16
16
16
13
10
16
16
28
35
35
35
40
40
40
40
49
49
49
28
20
49
49
mmmm mm
C to FSocket DepthFitting Size
30 x 25
38 x 16
38 x 25
38 x 30
44.5 x 16
44.5 x 25
44.5 x 30
44.5 x 38
57 x 44.5
57 x 16
57 x 25
30 x 16
25 x 16
57 x 30
57 x 38
13
13
13
16
13
10
29
35
40
49
28
20
mmmm mm
C to FSocket DepthFitting Size
30
38
44.5
57
25
16
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
24. TEE 25. REDUCING TEE
61. STOP END
17
18
19
22
17
14
13
13
13
16
13
10
mmmm mm
C to FSocket DepthFitting Size
30
38
44.5
57
25
16
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
30
38
44.5
57
25
16
13
13
13
16
13
10
37
37
41
44
34
27
mmmm mm
SocketDepthLength
55
65
70
85
50
40
mm
AFFitting Size
68. STRAIGHT UNION ADAPTOR
3/4 " x 25 mm
1" x 25 mm
1/2 " x 16 mm
1" x 30 mm
11/4 " x 30 mm
11/4 " x 38 mm
11/2 " x 38 mm
11/2 " x 44.5 mm
2" x 44.5 mm
2" x 57 mm
55
55
65
65
70
70
85
85
85
50
40
2" x 38 mm
13
13
13
13
13
13
13
13
16
13
10
mm mm
SocketDepthLength
Fitting Size
69. HEXAGON MALE ADAPTOR
3/4 " x 11/4 "
1" x 11/2 "
1/2 " x 1"
11/4 " x 13/4 "
11/2 " x 2"
2" x 21/2 "
55
57
55
61
46
42
50
50
65
80
46
36
mm mm
AFLengthFitting Size
70. MALE NIPPLE
Section 2 & 3
Section 2 & 3
Section 2 & 3
Section 5
Section 2, 3 & 5
Section 2 & 3
24. TEE16mm - 57mm, N or NS
25. REDUCING TEE16mm - 57mm, N or NS
61. STOP END16mm - 57mm, N or NS
68. STRAIGHT UNION ADAPTORRound nose. 1/4" - 2" Screwed. 16mm - 57mm N or NS.
69. HEXAGON MALE ADAPTOR
70. MALE NIPPLEUnion Thread x parallel male thread, 60° Cone. 1/4" - 2" Screwed, N or NS.
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel42
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 2, 3 & 5
13
13
13
13
13
13
13
13
16
16
16
13
10
16
16
28
35
35
35
40
40
40
40
49
49
49
28
20
49
49
mmmm mm
C to FSocket DepthFitting Size
30 x 25
38 x 16
38 x 25
38 x 30
44.5 x 16
44.5 x 25
44.5 x 30
44.5 x 38
57 x 44.5
57 x 16
57 x 25
30 x 16
25 x 16
57 x 30
57 x 38
13
13
13
16
13
10
29
35
40
49
28
20
mmmm mm
C to FSocket DepthFitting Size
30
38
44.5
57
25
16
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
24. TEE 25. REDUCING TEE
61. STOP END
17
18
19
22
17
14
13
13
13
16
13
10
mmmm mm
C to FSocket DepthFitting Size
30
38
44.5
57
25
16
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
30
38
44.5
57
25
16
13
13
13
16
13
10
37
37
41
44
34
27
mmmm mm
SocketDepthLength
55
65
70
85
50
40
mm
AFFitting Size
68. STRAIGHT UNION ADAPTOR
3/4 " x 25 mm
1" x 25 mm
1/2 " x 16 mm
1" x 30 mm
1 1/4 " x 30 mm
1 1/4 " x 38 mm
1 1/2 " x 38 mm
1 1/2 " x 44.5 mm
2" x 44.5 mm
2" x 57 mm
55
55
65
65
70
70
85
85
85
50
40
2" x 38 mm
13
13
13
13
13
13
13
13
16
13
10
mm mm
SocketDepthLength
Fitting Size
69. HEXAGON MALE ADAPTOR
3/4 " x 1 1/4 "
1" x 1 1/2 "
1/2 " x 1"
1 1/4 " x 1 3/4 "
1 1/2 " x 2"
2" x 2 1/2 "
55
57
55
61
46
42
50
50
65
80
46
36
mm mm
AFLengthFitting Size
70. MALE NIPPLE
Section 2 & 3
Section 2 & 3
Section 2 & 3
Section 5
Section 2, 3 & 5
Section 2 & 3
24. TEE16mm - 57mm, N or NS
25. REDUCING TEE 16mm - 57mm, N or NS
61. STOP END16mm - 57mm, N or NS
68. STRAIGHT UNION ADAPTORRound nose. 1/4" - 2" Screwed. 16mm - 57mm N or NS.
69. HEXAGON MALEADAPTOR
70. MALE NIPPLEUnion Thread x parallel male thread, 60° Cone. 1/4" - 2" Screwed, N or NS.
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 43
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 6
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
mm
44
43
41
70
55
50
mm mm
AFLengthFitting Size
2" x 44.5 mm
1 1/4 " x 25 mm
1" x 25 mm
75. NUT AND LINING
25 x 25 to 44.5
25 x 57 to 610
30 x 30 to 44.5
30 x 57 to 610
38 x 38 to 44.5
38 x 57 to 610
44.5 x 44.5 to 610
57 x 57 to 76.1
57 x 88.9 to 610
76.1 x 76.1 to 108
76.7 x 159 to 610
16 x 57 to 610
16 x 16 to 44.5
88.9 x 88.9 to 108
88.9 x 159 to 610
108 x 108
108 x 159 to 610
108 x 219.1 to 610
159 x 159 to 610
219.1 x 219.1 to 610
267 x 323.9 to 610
323.9 x 323.9 to 610
368 x 368 to 610
419 x 419 to 610
0.11
0.21
0.16
0.26
0.24
0.39
0.45
0.48
0.88
2.00-1.85
1.77-1.60
0.11
0.07
2.68-2.39
2.33-2.05
2.82
3.57
3.00-2.71
7.59-6.25
15.05-12.00
25.50-20.00
35.00-26.10
51.00-39.40
75.00-60.50
30
38
35
41
44
50
52
63
65
85
90
29
21
86
103
105
125
116
168
235
288
308
349
398
20.6
20.6
22.2
22.2
25.4
25.4
28.6
33.3
33.3
47.6
44.5
17.5
19.05
47.6
44.5
46.8
52.4
49.2
60.3
69.9
77.8
85.7
88.9
93.7
mm mm kg
Approx. Total WeightA
mm
CBranch Tube Size Header Size Range x
TypeForgings from Cu Ni 90/10 standard stock.
DesignSuitable for 16 bar for temperatures up to and including 75˚C and 20 bar up to and including 38˚C.
DimensionsTo EEMUA Publication No. 146: Section 6.
Butt Weld Branch ConnectorsSelf-Reinforced Branch Connector - Butt Welded Type
Weld PreparationWall thickness ‘†’ of 3mm and greater are chamfered to 371/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Building-in dimensions for Lightweight - Butt Weld type (mm)
Section 2 & 3
72. FEMALE NIPPLEUnion Thread x parallel male thread, 60° Cone. 1/4" - 2" Screwed, N or NS.
75. NUT AND LININGMale copper lining with loose union nut.Round nose. 1/4" - 57mm, N or NS.
90. SPRINKLER BUSHSmall: as Stop End. 1/2" - 2" Screwed N or NS.
At
R
CR = Radius of Header Pipe
40° ± 2½°37½° ± 2½°
The bores of SRBC butt welded type fittings are machined in accordance withrecommendations in EEMUA Publication No 146: Section 6.
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel44
EEMUA 146 - Section 2, 3 & 5 EEMUA 146 - Section 6
RatingTo suit 14-20 bar pressures up to and including 38˚C.
Capillary End and Socket Weld Fittings
CAPILLARY END - N SOCKET WELD - NS
mm
44
43
41
70
55
50
mm mm
AFLengthFitting Size
2" x 44.5 mm
1 1/4 " x 25 mm
1" x 25 mm
75. NUT AND LINING
25 x 25 to 44.5
25 x 57 to 610
30 x 30 to 44.5
30 x 57 to 610
38 x 38 to 44.5
38 x 57 to 610
44.5 x 44.5 to 610
57 x 57 to 76.1
57 x 88.9 to 610
76.1 x 76.1 to 108
76.7 x 159 to 610
16 x 57 to 610
16 x 16 to 44.5
88.9 x 88.9 to 108
88.9 x 159 to 610
108 x 108
108 x 159 to 610
108 x 219.1 to 610
159 x 159 to 610
219.1 x 219.1 to 610
267 x 323.9 to 610
323.9 x 323.9 to 610
368 x 368 to 610
419 x 419 to 610
0.11
0.21
0.16
0.26
0.24
0.39
0.45
0.48
0.88
2.00-1.85
1.77-1.60
0.11
0.07
2.68-2.39
2.33-2.05
2.82
3.57
3.00-2.71
7.59-6.25
15.05-12.00
25.50-20.00
35.00-26.10
51.00-39.40
75.00-60.50
30
38
35
41
44
50
52
63
65
85
90
29
21
86
103
105
125
116
168
235
288
308
349
398
20.6
20.6
22.2
22.2
25.4
25.4
28.6
33.3
33.3
47.6
44.5
17.5
19.05
47.6
44.5
46.8
52.4
49.2
60.3
69.9
77.8
85.7
88.9
93.7
mm mm kg
Approx. Total WeightA
mm
CBranch Tube Size Header Size Range x
TypeForgings from Cu Ni 90/10 standard stock.
DesignSuitable for 16 bar for temperatures up to and including 75˚C and 20 bar up to and including 38˚C.
DimensionsTo EEMUA Publication No. 146: Section 6.
Butt Weld Branch ConnectorsSelf-Reinforced Branch Connector - Butt Welded Type
Weld PreparationWall thickness ‘†’ of 3mm and greater are chamfered to 371/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Building-in dimensions for Lightweight - Butt Weld type (mm)
Section 2 & 3
72. FEMALE NIPPLEUnion Thread x parallel male thread, 60° Cone. 1/4" - 2" Screwed, N or NS.
75. NUT AND LININGMale copper lining with loose union nut.Round nose. 1/4" - 57mm, N or NS.
90. SPRINKLER BUSHSmall: as Stop End. 1/2" - 2" Screwed N or NS.
At
R
CR = Radius of Header Pipe
40° ± 2½°37½° ± 2½°
The bores of SRBC butt welded type fittings are machined in accordance with recommendations in EEMUA Publication No 146: Section 6.
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 45
EEMUA 146 - Section 6 EEMUA 146 - Section 7
Building-in dimensions for Lightweight Socket Welded/Brazed types (mm)
25 x 57 to 914
25 x 25
30 x 30 to 44.5
30 x 57 to 914
30 x 30
30 x 38 to 44.5
30 x 57 to 914
38 x 38
38 x 57 to 914
44.5 x 44.5
44.5 x 57 to 914
16 x 25 to 44.5
16 x 16
57 x 57
57 x 76.1 to 914
0.06
0.10
0.10
0.21
0.17
0.17
0.30
0.25
0.58
0.24
0.51
0.06
0.07
0.42
1.50
18
23
28
28
29
35
35
43
44
46
48
18
15
55
61
23.8
26.9
26.9
25.4
33.3
33.3
28.6
33.3
33.3
30.2
30.2
25.4
25.4
38.1
38.1
mm mm kg
Approx.Total
WeightA
nom
10
13
13
13
13
13
13
13
13
13
13
10
10
16
16
mm
amin
mm
CBranchTubeo.d.
HeaderSize
Range x
TypeForgings from 90/10 CuNi: Standard stock.
DesignSuitable for 16 bar for temperatures up to and including 75˚C and 20 bar up to and including 38˚C.
DimensionsTo EEMUA Publication No. 146: Section 6. Socket tolerances are sufficient to allow capillary brazing if preferred.
Self-Reinforced Branch Connector - Socket Welded/Brazed Types
Socket Weld and Threaded Branch Connectors
160 (5.56)
160 (5.56)
160 (6.35)
160 (6.35)
160 (6.35)
160 (7.14)
160 (8.74)
160 (4.78)
160 (4.78)
0.17
0.10
0.33
0.18
0.40
0.50
1.00
0.07
0.08
23
23
35
35
47
50
63
21
21
26.9
25.4
33.3
28.6
33.3
30.2
38.1
23.8
25.4
mmmm
30-44.5
57-914
38-44.5
57-914
57-914
57-914
76.1-914
57-914
25-44.5
mm mm kg
Approx.Total
WeightA
nom
14
14
17.5
17.5
18
18.5
19
13.5
13.5
mm
amin
mm
CBranchTubeo.d.
Pipe**Schedule
No.
HeaderSize
Range x x
1
1
1 1/4
1 1/2
2
3/43/4
1/2
1/2
TypeForgings from 90/10 CuNi: Standard stock.
DesignSuitable for 16 bar for temperatures up to and including 75˚C and 20 bar up to and including 38˚C.
DimensionsTo EEMUA Publication No. 146: Section 6.
NoteSizes for header diameters larger than 610mm are available on request.**The bores of threaded types are machined to correspond to the bores of the above scheduled pipe thickness.
Self-Reinforced Branch Connector - Threaded Type
Building-in dimensions for Lightweight Threaded types (mm)
NominalSize
in
2.574±2.544.5
2.597±357
2.5126±376.1
2.5149±388.9
3.0188±4108
3.0279±4159
4.0379±5219.1
4.5447±5267
5.5560±6323.9
6.5613±6368
7.0680±6419
8.0800±6457.2
8.5880±7508
10.51020±7610
12.01225±7711
13.51440±7813
15.5
2.5
2.5
2.5
2.5
3.0
3.5
4.5
5.5
7.0
8.0
9.0
9.5
11.0
13.0
-
-
-
35
40
50
55
75
95
125
155
185
200
225
250
275
300
360
410
460 1550±7
15
20
25
30
40
60
80
90
100
-
-
-
-
-
-
-
-914
b±2
mm mm mm mm mm mm
16 barL 20 bar rxSpecified
Size d
1 1/2
2 1/2
2
3
4
6
8
10
12
14
16
18
20
24
28
32
36
Pipe Wall Thickness †
Saddle Pieces ConstructionOne piece forgings or fabricated welded construction.
DimensionsTo suit appropriate header and branch pipe diameters and thickness for 16 bar and 20 bar rated systems to EEMUA Publication No. 146.
Saddles
NoteFor reducing saddles, ‘†’ will be the same as specified branch pipethickness.
Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Weld Inspection100% radiographic inspection to ASME Code, Section VIII. UW51.
Aa
C
40° ± 2½°
Aa
C
40° ± 2½°
* Dimension t1 shall not be less than the specified thickness of the header pipe nor more than 1.5mm greater for seamless saddles, nor more than 2.0mmgreater for fabricated saddles in the weld areas.
ID
L
d
R t1*
Shape formultiplereductions rx
b
SEAMLESS TYPE
ID
L
d
R t1*
Shape formultiplereductions
rxb
dRoot face 1.6mm ± 0.8mm
Slope 1:4t
Round offsharp edgeThickness of
fitting as made
37½º ± 2½º
45º min
WELDED TYPE
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel46
EEMUA 146 - Section 6 EEMUA 146 - Section 7
Building-in dimensions for LightweightSocket Welded/Brazed types (mm)
25 x 57 to 914
25 x 25
30 x 30 to 44.5
30 x 57 to 914
30 x 30
30 x 38 to 44.5
30 x 57 to 914
38 x 38
38 x 57 to 914
44.5 x 44.5
44.5 x 57 to 914
16 x 25 to 44.5
16 x 16
57 x 57
57 x 76.1 to 914
0.06
0.10
0.10
0.21
0.17
0.17
0.30
0.25
0.58
0.24
0.51
0.06
0.07
0.42
1.50
18
23
28
28
29
35
35
43
44
46
48
18
15
55
61
23.8
26.9
26.9
25.4
33.3
33.3
28.6
33.3
33.3
30.2
30.2
25.4
25.4
38.1
38.1
mm mm kg
Approx.Total
WeightA
nom
10
13
13
13
13
13
13
13
13
13
13
10
10
16
16
mm
amin
mm
CBranchTubeo.d.
HeaderSize
Range x
TypeForgings from 90/10 CuNi: Standard stock.
DesignSuitable for 16 bar for temperatures up to and including 75˚C and 20 bar up to and including 38˚C.
DimensionsTo EEMUA Publication No. 146: Section 6. Socket tolerances are sufficient to allow capillarybrazing if preferred.
Self-Reinforced Branch Connector -Socket Welded/Brazed Types
Socket Weld and Threaded Branch Connectors
160 (5.56)
160 (5.56)
160 (6.35)
160 (6.35)
160 (6.35)
160 (7.14)
160 (8.74)
160 (4.78)
160 (4.78)
0.17
0.10
0.33
0.18
0.40
0.50
1.00
0.07
0.08
23
23
35
35
47
50
63
21
21
26.9
25.4
33.3
28.6
33.3
30.2
38.1
23.8
25.4
mmmm
30-44.5
57-914
38-44.5
57-914
57-914
57-914
76.1-914
57-914
25-44.5
mm mm kg
Approx.Total
WeightA
nom
14
14
17.5
17.5
18
18.5
19
13.5
13.5
mm
amin
mm
CBranchTubeo.d.
Pipe**Schedule
No.
HeaderSize
Range x x
1
1
1 1/4
1 1/2
2
3/43/4
1/2
1/2
TypeForgings from 90/10 CuNi: Standard stock.
DesignSuitable for 16 bar for temperatures up to and including 75˚C and 20 bar up to and including 38˚C.
DimensionsTo EEMUA Publication No. 146: Section 6.
NoteSizes for header diameters larger than 610mm are available on request.**The bores of threaded types are machined to correspond to the bores of the above scheduled pipe thickness.
Self-Reinforced Branch Connector -Threaded Type
Building-in dimensions for LightweightThreaded types (mm)
NominalSize
in
2.574±2.544.5
2.597±357
2.5126±376.1
2.5149±388.9
3.0188±4108
3.0279±4159
4.0379±5219.1
4.5447±5267
5.5560±6323.9
6.5613±6368
7.0680±6419
8.0800±6457.2
8.5880±7508
10.51020±7610
12.01225±7711
13.51440±7813
15.5
2.5
2.5
2.5
2.5
3.0
3.5
4.5
5.5
7.0
8.0
9.0
9.5
11.0
13.0
-
-
-
35
40
50
55
75
95
125
155
185
200
225
250
275
300
360
410
460 1550±7
15
20
25
30
40
60
80
90
100
-
-
-
-
-
-
-
-914
b±2
mm mm mm mm mm mm
16 barL 20 bar rxSpecified
Size d
1 1/2
2 1/2
2
3
4
6
8
10
12
14
16
18
20
24
28
32
36
Pipe Wall Thickness †
Saddle Pieces ConstructionOne piece forgings or fabricated welded construction.
DimensionsTo suit appropriate header and branch pipe diameters and thickness for 16 bar and 20 bar rated systems to EEMUA Publication No. 146.
Saddles
NoteFor reducing saddles, ‘†’ will be the same as specified branch pipe thickness.
Weld PreparationWall thickness of 3mm and greater are chamfered to 37 1/2 ˚ ± 2 1/2 ˚ with a root face of 1.6mm ± 0.8mm.
Weld Inspection100% radiographic inspection to ASME Code, Section VIII. UW51.
Aa
C
40° ± 2½°
Aa
C
40° ± 2½°
* Dimension t1 shall not be less than the specified thickness of the header pipe nor more than 1.5mm greater for seamless saddles, nor more than 2.0mmgreater for fabricated saddles in the weld areas.
ID
L
d
R t1*
Shape formultiplereductions rx
b
SEAMLESS TYPE
ID
L
d
R t1*
Shape formultiplereductions
rxb
dRoot face 1.6mm ± 0.8mm
Slope 1:4t
Round offsharp edgeThickness of
fitting as made
37½º ± 2½º
45º min
WELDED TYPE
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 47
ASME /
BS / M
SS SP-4
3
• ASM
E B16
.11
• ASM
E B16
.48
• BS 3
799
• ASM
E B16
.5
• ASM
E B16
.9
• M
SS SP-
43
51
52
ASME - B16.11 ASME - B16.11
ASME B16.11
Plugs And Bushings I Forged Fittings, Socket-welding And Threaded
1/2
3/4
1 1/4
3/8
1/4
1/8
1
1 1/2
2
2 1/2
3
4
15
20
32
10
8
6
25
40
50
65
80
100
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
0.3810
0.4411
0.5013
0.5614
0.6216
0.7519
0.8121
0.8121
1.0527
0.8822
1.1228
1.2532
0.256
0.256
0.318
0.3810
0.4411
0.5013
0.5614
0.6216
0.7519
0.6918
0.8121
1.0025
0.287
0.3810
0.4411
0.5614
0.6216
0.8121
0.9424
1.1228
1.5036
1.3132
1.6941
2.5065
0.4110
0.5314
0.6918
0.8421
1.0627
1.3133
1.6943
1.9148
2.8873
2.3860
3.5089
4.50114
1.3835
1.6241
1.6241
1.7544
1.7544
2.0051
2.0051
2.0051
2.7570
2.5064
2.7570
3.0076
0.4411
0.6216
0.6918
0.8822
1.0627
1.3836
1.7546
2.0050
3.0075
2.5065
3.5090
4.62115
...
...
0.123
0.164
0.195
0.226
0.256
0.287
0.318
0.3810
0.349
0.4110
0.5013
0.256
0.256
0.318
0.318
0.3810
0.3810
0.5614
0.6216
0.7519
0.6918
0.8121
1.0025
DN
NominalPipeSize
Min.Length,
A
Min.SquareHeight,
B
Min.WidthFlats,
C
NominalHead
Diameter,E
NominalWidthFlats,
FMin. Bushing,
GPlug,
H
Min.Length,
D
Square Head Plugs Round Head Plugs Hex Plugs and Bushings
Hex Height
NOTE:1. Coutionary Note Regarding Hex Bushings: Hex head bushings of one-size reduction should not be used in services where they might be subject to harmful loads and forces other than internal pressures.
C
B
A
Square HeadPlug
H
A
F
Hexagon HeadPlug
Round HeadPlug
E
A
D
Hexagon HeadBushing
A
G
F
FlushBushing
A
ASME B16.11
Threaded Fittings I Forged Fittings, Socket-welding And Threaded
1/2
3/4
1 1/4
3/8
1/4
1/8
1
1 1/2
2
2 1/2
3
4
15
20
32
10
8
6
25
40
50
65
80
100
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
1.2632
1.3835
1.5038
1.8848
2.0051
2.3860
2.6267
3.1279
3.6292
3.3886
4.25108
4.75121
0.7519
1.0025
1.0025
1.2532
1.4437
1.6241
1.7544
1.7544
2.3860
1.8848
2.5665
2.6968
...
...
1.0627
1.0627
1.3133
1.5038
1.6943
1.8146
1.8848
2.5064
2.0051
2.6968
2.9475
0.6216
0.7519
0.8822
1.1228
1.3835
1.7544
2.2557
2.5064
3.6292
3.0076
4.25108
5.50140
0.8822
1.0025
1.2532
1.5038
1.7544
2.2557
2.5064
3.0076
4.25108
3.6292
5.00127
6.25159
0.256.4
0.328.1
0.369.1
0.4310.9
0.5012.7
0.5814.7
0.6717.0
0.7017.8
0.9323.6
0.7519.0
1.0225.9
1.0927.7
0.26396.7
0.401810.2
0.407810.4
0.533713.6
0.545713.9
0.682817.3
0.706818.0
0.723518.4
1.13828.9
0.756519.2
1.20030.5
1.30033.0
DN
NominalPipeSize 3000 and 6000 3000 6000 6000 B L23000
0.194.8
0.194.8
0.194.8
0.256.4
0.256.4
0.389.7
0.389.7
0.4411.2
0.6215.7
0.5012.7
0.7519.0
0.8822.4
...
...
0.256.4
0.256.4
0.317.9
0.317.9
0.4411.2
0.4411.2
0.5012.7
0.7519.0
0.6215.7
0.8822.4
1.1228.4
60003000
Min. Lengthof Thread[Note (1)]
End to EndCouplings,
W
End to EndCaps,
P
OutsideDiameter,
D
Min. End WellThickness,
G
NOTE:1. Class 2000 and DN6 class 6000 couplings, half couplings, and caps are not included in this Standard.
Coupling
W
D
L2B
Half-Coupling
D
L2B
W2
Cap
D
L2B
G
P
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel52
ASME - B16.11 ASME - B16.11
ASME B16.11
Plugs And Bushings I Forged Fittings, Socket-welding And Threaded
1/2
3/4
1 1/4
3/8
1/4
1/8
1
1 1/2
2
2 1/2
3
4
15
20
32
10
8
6
25
40
50
65
80
100
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
0.3810
0.4411
0.5013
0.5614
0.6216
0.7519
0.8121
0.8121
1.0527
0.8822
1.1228
1.2532
0.256
0.256
0.318
0.3810
0.4411
0.5013
0.5614
0.6216
0.7519
0.6918
0.8121
1.0025
0.287
0.3810
0.4411
0.5614
0.6216
0.8121
0.9424
1.1228
1.5036
1.3132
1.6941
2.5065
0.4110
0.5314
0.6918
0.8421
1.0627
1.3133
1.6943
1.9148
2.8873
2.3860
3.5089
4.50114
1.3835
1.6241
1.6241
1.7544
1.7544
2.0051
2.0051
2.0051
2.7570
2.5064
2.7570
3.0076
0.4411
0.6216
0.6918
0.8822
1.0627
1.3836
1.7546
2.0050
3.0075
2.5065
3.5090
4.62115
...
...
0.123
0.164
0.195
0.226
0.256
0.287
0.318
0.3810
0.349
0.4110
0.5013
0.256
0.256
0.318
0.318
0.3810
0.3810
0.5614
0.6216
0.7519
0.6918
0.8121
1.0025
DN
NominalPipeSize
Min.Length,
A
Min.SquareHeight,
B
Min.WidthFlats,
C
NominalHead
Diameter,E
NominalWidthFlats,
FMin. Bushing,
GPlug,
H
Min.Length,
D
Square Head Plugs Round Head Plugs Hex Plugs and Bushings
Hex Height
NOTE:1. Coutionary Note Regarding Hex Bushings: Hex head bushings of one-size reduction should not be used in services where they might be subject to harmful loads and forces other than internal pressures.
C
B
A
Square HeadPlug
H
A
F
Hexagon HeadPlug
Round HeadPlug
E
A
D
Hexagon HeadBushing
A
G
F
FlushBushing
A
ASME B16.11
Threaded Fittings I Forged Fittings, Socket-welding And Threaded
1/2
3/4
1 1/4
3/8
1/4
1/8
1
1 1/2
2
2 1/2
3
4
15
20
32
10
8
6
25
40
50
65
80
100
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
1.2632
1.3835
1.5038
1.8848
2.0051
2.3860
2.6267
3.1279
3.6292
3.3886
4.25108
4.75121
0.7519
1.0025
1.0025
1.2532
1.4437
1.6241
1.7544
1.7544
2.3860
1.8848
2.5665
2.6968
...
...
1.0627
1.0627
1.3133
1.5038
1.6943
1.8146
1.8848
2.5064
2.0051
2.6968
2.9475
0.6216
0.7519
0.8822
1.1228
1.3835
1.7544
2.2557
2.5064
3.6292
3.0076
4.25108
5.50140
0.8822
1.0025
1.2532
1.5038
1.7544
2.2557
2.5064
3.0076
4.25108
3.6292
5.00127
6.25159
0.256.4
0.328.1
0.369.1
0.4310.9
0.5012.7
0.5814.7
0.6717.0
0.7017.8
0.9323.6
0.7519.0
1.0225.9
1.0927.7
0.26396.7
0.401810.2
0.407810.4
0.533713.6
0.545713.9
0.682817.3
0.706818.0
0.723518.4
1.13828.9
0.756519.2
1.20030.5
1.30033.0
DN
NominalPipeSize 3000 and 6000 3000 6000 6000 B L23000
0.194.8
0.194.8
0.194.8
0.256.4
0.256.4
0.389.7
0.389.7
0.4411.2
0.6215.7
0.5012.7
0.7519.0
0.8822.4
...
...
0.256.4
0.256.4
0.317.9
0.317.9
0.4411.2
0.4411.2
0.5012.7
0.7519.0
0.6215.7
0.8822.4
1.1228.4
60003000
Min. Lengthof Thread[Note (1)]
End to EndCouplings,
W
End to EndCaps,
P
OutsideDiameter,
D
Min. End WellThickness,
G
NOTE:1. Class 2000 and DN6 class 6000 couplings, half couplings, and caps are not included in this Standard.
Coupling
W
D
L2B
Half-Coupling
D
L2B
W2
Cap
D
L2B
G
P
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 53
ASME - B16.48 ASME - B16.48
Dimensions of class 150 raised face figure 8 blanks
Steel Line Blanks I ASME B16.48
Can be manufactured solid or clad 90/10
NOTES:1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not interfere with bolting between two flanges.2) The thickness of the web (or tie bar) dimension W, shall be 2.25in. minimum, except when † is less than 0.25 in., W, shall equal †.
NPS
60.4515.75
26.67
69.8520.83
79.25
88.9042.16
98.5548.26
60.45
73.15
88.90
101.60
Thickness†
Web WidthW
InsideDiameter B
OutsideDiameter O
CenterlineDiamension A
1/2
1
3/4
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
120.65
139.70
152.40
177.80
190.50114.30
215.90141.22
241.30168.15
298.45218.95
361.95273.05
431.80323.85
476.25355.60
539.75
3.05
3.05
3.05
6.35
6.35
6.35
6.35
6.35
9.65
9.65
9.65
12.70
12.70
15.75
44.45
19.05
22.35
44.45
53.85
63.50
73.15
82.55
101.60
120.65
133.35
158.75
171.45
193.55
218.95
276.35
336.55
406.40
447.55
511.05
38.10
38.10
38.10
38.10
38.10
50.80
50.80
63.50
63.50
63.50
76.20
76.20
76.20
101.60
101.60
107.95
107.95406.40
577.85457.20
635.00508.00
749.30
25.40
28.45
31.75
546.10
603.25
714.25
114.30
120.65
139.70609.60
18
20
24
Dimensions of class 300 raised face figure 8 blanks
Steel Line Blanks I ASME B16.48
NOTES:1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not interfere with bolting between two flanges.2) The thickness of the web (or tie bar) dimension W, shall be 2.25in. minimum.
NPS
66.55
82.55
88.90
98.55
114.30
127.00
149.35
168.15
184.15
200.15
234.95
269.75
330.20
387.35
450.85
514.35
571.50
6.35
6.35
6.35
6.35
6.35
9.65
9.65
9.65
12.70
12.70
15.75
15.75
22.35
25.40
28.45
31.75
38.10
50.80
63.50
69.85
79.25
91.95
107.95
127.00
146.05
162.05
177.80
212.85
247.65
304.80
358.65
419.10
482.60
536.45
Thickness†
Web WidthW
InsideDiameter B
OutsideDiameter O
CenterlineDiamension A
1/2
1
3/4
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
628.65
685.80
812.80
41.15
44.45
50.80
593.85
650.75
771.65
18
20
24
15.75
20.83
26.67
42.16
48.26
60.45
73.15
88.90
101.60
114.30
141.22
168.15
218.95
273.05
323.85
355.60
406.40
457.20
508.00
609.60
38.10
38.10
38.10
38.10
38.10
50.80
50.80
63.50
63.50
63.50
76.20
76.20
88.90
101.60
101.60
120.65
123.95
114.30
120.65
139.70
Wt
t
W
A
BO O
Note (1)
+20
+80
Note (2)2mm
Wt
t
W
A
BO O
Note (1)
Note (2)
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
2.380.62
2.750.82
3.121.05
3.501.66
3.881.90
4.752.38
5.502.88
6.003.50
7.004.00
7.504.50
8.505.56
9.506.62
11.758.62
14.2510.75
17.0012.75
18.7514.00
21.25
0.12
0.12
0.12
0.25
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.50
0.50
0.62
0.75
0.75
0.88
1.75
2.12
2.50
2.88
3.25
4.00
4.75
5.25
6.25
6.75
7.62
8.62
10.88
13.25
16.00
17.62
20.12
1.50
1.50
1.50
1.50
1.50
2.00
2.00
2.50
2.50
2.50
3.00
3.00
3.00
4.00
4.00
4.25
4.2516.00
22.7518.00
25.0020.00
29.50
1.00
1.12
1.25
21.50
23.75
28.12
4.50
4.75
5.5024.00
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
2.620.62
3.250.82
3.501.05
3.881.66
4.501.90
5.002.38
5.882.88
6.623.50
7.254.00
7.884.50
9.255.56
10.626.62
13.008.62
15.2510.75
17.7512.75
20.2514.00
22.50
0.25
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.50
0.50
0.62
0.62
0.88
1.00
1.12
1.25
1.50
2.00
2.50
2.75
3.12
3.62
4.25
5.00
5.75
6.38
7.00
8.38
9.75
12.00
14.12
16.50
19.00
21.12
1.50
1.50
1.50
1.50
2.00
2.00
2.50
2.50
2.50
2.50
3.00
3.00
3.50
4.00
4.00
4.75
4.8816.00
24.7518.00
27.0020.00
32.00
1.62
1.75
2.00
23.38
25.62
30.38
4.50
4.75
5.5024.00
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel54
ASME - B16.48 ASME - B16.48
Dimensions of class 150 raised face figure 8 blanks
Steel Line Blanks I ASME B16.48
Can be manufactured solid or clad 90/10
NOTES:1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not
interfere with bolting between two flanges.2) The thickness of the web (or tie bar) dimension W, shall be 2.25in. minimum, except when † is less than 0.25 in., W, shall
equal †.
NPS
60.4515.75
26.67
69.8520.83
79.25
88.9042.16
98.5548.26
60.45
73.15
88.90
101.60
Thickness†
Web WidthW
InsideDiameter B
OutsideDiameter O
CenterlineDiamension A
1/2
1
3/4
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
120.65
139.70
152.40
177.80
190.50114.30
215.90141.22
241.30168.15
298.45218.95
361.95273.05
431.80323.85
476.25355.60
539.75
3.05
3.05
3.05
6.35
6.35
6.35
6.35
6.35
9.65
9.65
9.65
12.70
12.70
15.75
44.45
19.05
22.35
44.45
53.85
63.50
73.15
82.55
101.60
120.65
133.35
158.75
171.45
193.55
218.95
276.35
336.55
406.40
447.55
511.05
38.10
38.10
38.10
38.10
38.10
50.80
50.80
63.50
63.50
63.50
76.20
76.20
76.20
101.60
101.60
107.95
107.95406.40
577.85457.20
635.00508.00
749.30
25.40
28.45
31.75
546.10
603.25
714.25
114.30
120.65
139.70609.60
18
20
24
Dimensions of class 300 raised face figure 8 blanks
Steel Line Blanks I ASME B16.48
NOTES:1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not interfere with bolting between two flanges.2) The thickness of the web (or tie bar) dimension W, shall be 2.25in. minimum.
NPS
66.55
82.55
88.90
98.55
114.30
127.00
149.35
168.15
184.15
200.15
234.95
269.75
330.20
387.35
450.85
514.35
571.50
6.35
6.35
6.35
6.35
6.35
9.65
9.65
9.65
12.70
12.70
15.75
15.75
22.35
25.40
28.45
31.75
38.10
50.80
63.50
69.85
79.25
91.95
107.95
127.00
146.05
162.05
177.80
212.85
247.65
304.80
358.65
419.10
482.60
536.45
Thickness†
Web WidthW
InsideDiameter B
OutsideDiameter O
CenterlineDiamension A
1/2
1
3/4
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
628.65
685.80
812.80
41.15
44.45
50.80
593.85
650.75
771.65
18
20
24
15.75
20.83
26.67
42.16
48.26
60.45
73.15
88.90
101.60
114.30
141.22
168.15
218.95
273.05
323.85
355.60
406.40
457.20
508.00
609.60
38.10
38.10
38.10
38.10
38.10
50.80
50.80
63.50
63.50
63.50
76.20
76.20
88.90
101.60
101.60
120.65
123.95
114.30
120.65
139.70
Wt
t
W
A
BO O
Note (1)
+20
+80
Note (2)2mm
Wt
t
W
A
BO O
Note (1)
Note (2)
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
2.380.62
2.750.82
3.121.05
3.501.66
3.881.90
4.752.38
5.502.88
6.003.50
7.004.00
7.504.50
8.505.56
9.506.62
11.758.62
14.2510.75
17.0012.75
18.7514.00
21.25
0.12
0.12
0.12
0.25
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.50
0.50
0.62
0.75
0.75
0.88
1.75
2.12
2.50
2.88
3.25
4.00
4.75
5.25
6.25
6.75
7.62
8.62
10.88
13.25
16.00
17.62
20.12
1.50
1.50
1.50
1.50
1.50
2.00
2.00
2.50
2.50
2.50
3.00
3.00
3.00
4.00
4.00
4.25
4.2516.00
22.7518.00
25.0020.00
29.50
1.00
1.12
1.25
21.50
23.75
28.12
4.50
4.75
5.5024.00
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
2.620.62
3.250.82
3.501.05
3.881.66
4.501.90
5.002.38
5.882.88
6.623.50
7.254.00
7.884.50
9.255.56
10.626.62
13.008.62
15.2510.75
17.7512.75
20.2514.00
22.50
0.25
0.25
0.25
0.25
0.25
0.38
0.38
0.38
0.50
0.50
0.62
0.62
0.88
1.00
1.12
1.25
1.50
2.00
2.50
2.75
3.12
3.62
4.25
5.00
5.75
6.38
7.00
8.38
9.75
12.00
14.12
16.50
19.00
21.12
1.50
1.50
1.50
1.50
2.00
2.00
2.50
2.50
2.50
2.50
3.00
3.00
3.50
4.00
4.00
4.75
4.8816.00
24.7518.00
27.0020.00
32.00
1.62
1.75
2.00
23.38
25.62
30.38
4.50
4.75
5.5024.00
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 55
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.5 ASME - B16.5
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.3
6.12155.6
6.50165.1
7.50190.5
8.25209.5
10.00254.0
9.00228.5
11.0279.4
15.00381.0
12.50317.5
17.50444.52
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.8822.3
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
4.57116.1
4.07103.4
5.66143.8
8.72221.5
6.72170.7
10.8876.35
14.14359.15
12.88327.15
16.16410.5
20.20513.1
18.18461.8
24.25615.95
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.8847.6
1.7544.4
2.0050.8
2.4461.9
2.0652.4
2.6266.7
3.0076.2
2.8873.0
3.2582.5
3.7595.2
3.5088.9
4.19106.4
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
5.75146.0
5.25133.4
7.00177.8
10.25260.3
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.1
9.25234.9
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.5
32.00812.8
1.50.7
2.41.1
3.11.4
4.01.8
5.72.6
7.53.4
9.74.4
13.46.1
22.210.1
16.57.5
27.512.5
54.624.8
31.014.1
81.637.1
15470.0
11150.0
21397.0
293133
271123
458203
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.8822.3
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
4.60116.1
4.07103.4
5.66143.8
8.72221.5
6.72170.7
10.88276.35
14.14359.15
12.88327.15
16.16410.5
20.20513.1
18.18461.8
24.25615.95
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.9
1.1930.2
1.3133.3
1.2531.7
1.4436.5
1.7544.4
1.5639.7
1.9449.2
2.2557.1
2.1955.6
2.5063.5
2.8873.0
2.6968.3
3.2582.5
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
1.80.8
2.41.1
3.11.4
4.82.2
7.93.6
94.1
12.35.6
11.45.2
13.96.3
27.712.6
16.57.5
40.718.5
79.236
1.628
101.246
14064
11050
19689
ASME B16.5
Slip-on Flanges I Class 150
ASME B16.5
Slip-on Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed NB. Metric values are direct conversion from imperial sizes listed
FB
D
1/16” = 1.6mm
E
GKA
H
FB
D
1/16” = 1.6mm
E
GKA
H
56
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.5 ASME - B16.5
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.3
6.12155.6
6.50165.1
7.50190.5
8.25209.5
10.00254.0
9.00228.5
11.0279.4
15.00381.0
12.50317.5
17.50444.52
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.8822.3
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
4.57116.1
4.07103.4
5.66143.8
8.72221.5
6.72170.7
10.8876.35
14.14359.15
12.88327.15
16.16410.5
20.20513.1
18.18461.8
24.25615.95
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.8847.6
1.7544.4
2.0050.8
2.4461.9
2.0652.4
2.6266.7
3.0076.2
2.8873.0
3.2582.5
3.7595.2
3.5088.9
4.19106.4
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
5.75146.0
5.25133.4
7.00177.8
10.25260.3
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.1
9.25234.9
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.5
32.00812.8
1.50.7
2.41.1
3.11.4
4.01.8
5.72.6
7.53.4
9.74.4
13.46.1
22.210.1
16.57.5
27.512.5
54.624.8
31.014.1
81.637.1
15470.0
11150.0
21397.0
293133
271123
458203
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.8822.3
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
4.60116.1
4.07103.4
5.66143.8
8.72221.5
6.72170.7
10.88276.35
14.14359.15
12.88327.15
16.16410.5
20.20513.1
18.18461.8
24.25615.95
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.9
1.1930.2
1.3133.3
1.2531.7
1.4436.5
1.7544.4
1.5639.7
1.9449.2
2.2557.1
2.1955.6
2.5063.5
2.8873.0
2.6968.3
3.2582.5
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
1.80.8
2.41.1
3.11.4
4.82.2
7.93.6
94.1
12.35.6
11.45.2
13.96.3
27.712.6
16.57.5
40.718.5
79.236
1.628
101.246
14064
11050
19689
ASME B16.5
Slip-on Flanges I Class 150
ASME B16.5
Slip-on Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed NB. Metric values are direct conversion from imperial sizes listed
FB
D
1/16” = 1.6mm
E
GKA
H
FB
D
1/16” = 1.6mm
E
GKA
H
57
ASME - B16.5 ASME - B16.5
NB. Metric values are direct conversion from imperial sizes listed
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA HNumber
FlangeRaisedFace Drilling
Approx WeightPounds
KiloG
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25108.0
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
2.00.9
2.91.3
3.51.6
5.72.6
9.04.1
11.05.0
15.67.1
14.16.4
19.89.0
46.221.0
26.011.8
66.030.0
13059
99.045.0
17379
273124
21397
414188
ASME B16.5
Blind Flanges I Class 150
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA HNumber
FlangeRaisedFace Drilling
Approx WeightPounds
KiloG
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.3
6.12155.6
6.50165.1
7.50190.5
8.25209.5
10.00254.0
9.00228.5
11.0279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.1
9.25234.9
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.5
32.00812.8
1.50.7
2.61.2
3.31.5
4.42.0
6.42.9
7.53.4
11.25.1
15.47.0
26.011.8
19.68.9
34.115.5
77.435.2
46.921.3
12557.0
233106
18182.0
308140
491223
392178
759345
NB. Metric values are direct conversion from imperial sizes listed
ASME B16.5
Blind Flanges I Class 300
K
D
A
H
G1/16” = 1.6mm
K
D
A
H
G1/16” = 1.6mm
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel58
ASME - B16.5 ASME - B16.5
NB. Metric values are direct conversion from imperial sizes listed
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA HNumber
FlangeRaisedFace Drilling
Approx WeightPounds
KiloG
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25108.0
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
2.00.9
2.91.3
3.51.6
5.72.6
9.04.1
11.05.0
15.67.1
14.16.4
19.89.0
46.221.0
26.011.8
66.030.0
13059
99.045.0
17379
273124
21397
414188
ASME B16.5
Blind Flanges I Class 150
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA HNumber
FlangeRaisedFace Drilling
Approx WeightPounds
KiloG
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.3
6.12155.6
6.50165.1
7.50190.5
8.25209.5
10.00254.0
9.00228.5
11.0279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.1
9.25234.9
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.5
32.00812.8
1.50.7
2.61.2
3.31.5
4.42.0
6.42.9
7.53.4
11.25.1
15.47.0
26.011.8
19.68.9
34.115.5
77.435.2
46.921.3
12557.0
233106
18182.0
308140
491223
392178
759345
NB. Metric values are direct conversion from imperial sizes listed
ASME B16.5
Blind Flanges I Class 300
K
D
A
H
G1/16” = 1.6mm
K
D
A
H
G1/16” = 1.6mm
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 59
ASME - B16.5 ASME - B16.5
ASME B16.5
Welding Neck Flanges I Class 150
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
1.8847.6
2.0652.4
2.1955.6
2.2557.1
2.4461.9
2.5063.5
2.7569.8
2.7569.8
3.0076.2
2.8171.4
3.5088.9
4.00101.6
3.5088.9
4.00101.6
5.00127.0
4.50114.3
5.00127.0
5.69144.5
5.50139.7
6.00152.4
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
L
0.8421.3
1.0526.7
1.3233.5
1.6642.2
1.9048.3
2.3860.4
2.8873.1
3.5088.9
4.50114.3
4.00101.6
5.56141.2
8.63219.6
6.63168.4
10.75273.0
14.00355.6
12.75323.8
16.00406.4
20.00508.0
18.00457.2
24.00609.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
1.10.5
1.50.7
2.41.1
3.31.5
4.01.8
6.02.7
9.84.4
11.55.2
16.67.5
14.26.4
20.49.2
40.618.3
24.411.0
56.025.0
11351.0
86.039.0
13360.0
19488.0
15871.0
262119
NB. Metric values are direct conversion from imperial sizes listed
As
Sp
ecifi
ed b
y P
urch
aser
ASME B16.5
Welding Neck Flanges I Class 300
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.35
6.12155.6
6.50165.1
7.50190.5
8.25209.55
10.00254.0
9.00228.6
11.00279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
2.0652.4
2.2557.1
2.4461.9
2.5665.1
2.6968.3
2.7569.8
3.0076.2
3.1279.4
3.3885.7
3.1981.0
3.8898.4
4.38111.1
3.8898.4
4.62117.5
5.62142.9
5.12130.2
5.75146.05
6.38161.9
6.25158.75
6.62168.3
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.65117.5
5.75146.05
5.25133.35
7.00177.8
10.25260.35
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
L
0.8421.3
1.0526.7
1.3233.5
1.6642.2
1.9048.3
2.3860.45
2.8873.15
3.5088.9
4.50114.3
4.00101.6
5.56141.2
8.63219.6
6.63168.4
10.75273.05
14.00355.6
12.75323.85
16.00406.4
20.00508.0
18.00457.2
24.00609.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.15
9.25234.95
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.6
32.00812.8
1.80.8
2.91.3
3.71.7
4.82.2
7.03.2
7.93.6
11.95.4
16.37.4
26.211.9
19.68.9
35.216.0
68.831.0
44.820.2
97.544.3
19488.0
14164.0
249113
376171
295134
524238
NB. Metric values are direct conversion from imperial sizes listed
As
Sp
ecifi
ed b
y P
urch
aser
L
E
D
AKG
BH
F
1/16” = 1.6mm
1/16” = 1.6mm
37½°
L
E
D
AKG
BH
F
1/16” = 1.6mm
1/16” = 1.6mm
37½°
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel60
ASME - B16.5 ASME - B16.5
ASME B16.5
Welding Neck Flanges I Class 150
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
1.8847.6
2.0652.4
2.1955.6
2.2557.1
2.4461.9
2.5063.5
2.7569.8
2.7569.8
3.0076.2
2.8171.4
3.5088.9
4.00101.6
3.5088.9
4.00101.6
5.00127.0
4.50114.3
5.00127.0
5.69144.5
5.50139.7
6.00152.4
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
L
0.8421.3
1.0526.7
1.3233.5
1.6642.2
1.9048.3
2.3860.4
2.8873.1
3.5088.9
4.50114.3
4.00101.6
5.56141.2
8.63219.6
6.63168.4
10.75273.0
14.00355.6
12.75323.8
16.00406.4
20.00508.0
18.00457.2
24.00609.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
1.10.5
1.50.7
2.41.1
3.31.5
4.01.8
6.02.7
9.84.4
11.55.2
16.67.5
14.26.4
20.49.2
40.618.3
24.411.0
56.025.0
11351.0
86.039.0
13360.0
19488.0
15871.0
262119
NB. Metric values are direct conversion from imperial sizes listed
As
Sp
ecifi
ed b
y P
urch
aser
ASME B16.5
Welding Neck Flanges I Class 300
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.35
6.12155.6
6.50165.1
7.50190.5
8.25209.55
10.00254.0
9.00228.6
11.00279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
2.0652.4
2.2557.1
2.4461.9
2.5665.1
2.6968.3
2.7569.8
3.0076.2
3.1279.4
3.3885.7
3.1981.0
3.8898.4
4.38111.1
3.8898.4
4.62117.5
5.62142.9
5.12130.2
5.75146.05
6.38161.9
6.25158.75
6.62168.3
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.65117.5
5.75146.05
5.25133.35
7.00177.8
10.25260.35
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
L
0.8421.3
1.0526.7
1.3233.5
1.6642.2
1.9048.3
2.3860.45
2.8873.15
3.5088.9
4.50114.3
4.00101.6
5.56141.2
8.63219.6
6.63168.4
10.75273.05
14.00355.6
12.75323.85
16.00406.4
20.00508.0
18.00457.2
24.00609.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.15
9.25234.95
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.6
32.00812.8
1.80.8
2.91.3
3.71.7
4.82.2
7.03.2
7.93.6
11.95.4
16.37.4
26.211.9
19.68.9
35.216.0
68.831.0
44.820.2
97.544.3
19488.0
14164.0
249113
376171
295134
524238
NB. Metric values are direct conversion from imperial sizes listed
As
Sp
ecifi
ed b
y P
urch
aser
L
E
D
AKG
BH
F
1/16” = 1.6mm
1/16” = 1.6mm
37½°
L
E
D
AKG
BH
F
1/16” = 1.6mm
1/16” = 1.6mm
37½°
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 61
ASME - B16.5 ASME - B16.5
ASME B16.5
Lap Joint Flanges I Class 150
NB. Metric values are direct conversion from imperial sizes listed
NominalPipeSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
Flange RadiusHub DrillingApprox WeightPounds
KiloE r
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.9022.9
1.1128.2
1.3835.05
1.7243.7
1.9750.0
2.4662.5
2.9775.4
3.6091.4
4.60116.8
4.10104.1
5.69144.5
8.75222.25
6.75171.45
10.92277.4
14.18360.2
12.92328.2
16.19411.2
20.25514.35
18.20462.3
24.25615.95
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.1930.2
1.3133.3
1.2531.7
1.4436.5
1.7544.4
1.5639.7
1.9449.2
3.1279.4
2.1955.6
3.4487.3
4.06103.2
3.8196.8
4.38111.1
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
0.123.20
0.123.20
0.123.20
0.1948.0
0.256.35
0.317.90
0.317.90
0.389.50
0.4411.1
0.389.50
0.4411.1
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
1.80.8
2.41.1
3.11.4
4.82.2
7.93.6
9.04.1
12.35.6
11.45.2
13.96.3
27.712.6
16.57.5
40.718.5
79.236.0
61.628.0
101.246.0
140.064.0
110.050.0
196.089.0
ASME B16.5
Lap Joint Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed
NominalPipeSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
Flange RadiusHub DrillingApprox WeightPounds
KiloE r
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.3
6.12155.6
6.50165.1
7.50190.5
8.25209.5
10.00254.0
9.00228.5
11.00279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.9022.9
1.1128.2
1.3835.05
1.7243.7
1.9750.0
2.4662.5
2.9775.4
3.6091.4
4.60116.8
4.10104.1
5.69144.5
8.75222.25
6.75171.45
10.92277.4
14.18360.2
12.92328.2
16.19411.2
20.25514.35
18.20462.3
24.25615.95
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.8847.6
1.7544.4
2.0050.8
2.4461.9
2.0652.4
3.7595.2
4.38111.1
4.00101.6
4.75120.65
5.50139.7
5.12130.2
6.00152.4
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
5.75146.0
5.25133.4
7.00177.8
10.25260.3
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
0.123.20
0.123.20
0.123.20
0.1948.0
0.256.35
0.317.90
0.317.90
0.389.50
0.4411.1
0.389.50
0.4411.1
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.1
9.25234.9
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.9
24.75628.5
32.00812.8
1.50.7
2.41.1
3.11.4
4.01.8
5.72.6
7.53.4
9.74.4
13.46.1
22.210.1
16.57.5
27.512.5
54.624.8
31.014.1
81.637.1
154.070.0
111.050.0
213.097.0
293.0133.0
271.0123.0
458.0208.0
FB
D E
KA
H
r
FB
D E
KA
H
r
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel62
ASME - B16.5 ASME - B16.5
ASME B16.5
Lap Joint Flanges I Class 150
NB. Metric values are direct conversion from imperial sizes listed
NominalPipeSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
Flange RadiusHub DrillingApprox WeightPounds
KiloE r
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.9022.9
1.1128.2
1.3835.05
1.7243.7
1.9750.0
2.4662.5
2.9775.4
3.6091.4
4.60116.8
4.10104.1
5.69144.5
8.75222.25
6.75171.45
10.92277.4
14.18360.2
12.92328.2
16.19411.2
20.25514.35
18.20462.3
24.25615.95
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.1930.2
1.3133.3
1.2531.7
1.4436.5
1.7544.4
1.5639.7
1.9449.2
3.1279.4
2.1955.6
3.4487.3
4.06103.2
3.8196.8
4.38111.1
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
0.123.20
0.123.20
0.123.20
0.1948.0
0.256.35
0.317.90
0.317.90
0.389.50
0.4411.1
0.389.50
0.4411.1
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
1.80.8
2.41.1
3.11.4
4.82.2
7.93.6
9.04.1
12.35.6
11.45.2
13.96.3
27.712.6
16.57.5
40.718.5
79.236.0
61.628.0
101.246.0
140.064.0
110.050.0
196.089.0
ASME B16.5
Lap Joint Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed
NominalPipeSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
Flange RadiusHub DrillingApprox WeightPounds
KiloE r
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.3
6.12155.6
6.50165.1
7.50190.5
8.25209.5
10.00254.0
9.00228.5
11.00279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.9022.9
1.1128.2
1.3835.05
1.7243.7
1.9750.0
2.4662.5
2.9775.4
3.6091.4
4.60116.8
4.10104.1
5.69144.5
8.75222.25
6.75171.45
10.92277.4
14.18360.2
12.92328.2
16.19411.2
20.25514.35
18.20462.3
24.25615.95
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.8
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.8847.6
1.7544.4
2.0050.8
2.4461.9
2.0652.4
3.7595.2
4.38111.1
4.00101.6
4.75120.65
5.50139.7
5.12130.2
6.00152.4
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
5.75146.0
5.25133.4
7.00177.8
10.25260.3
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
0.123.20
0.123.20
0.123.20
0.1948.0
0.256.35
0.317.90
0.317.90
0.389.50
0.4411.1
0.389.50
0.4411.1
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.5012.7
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.1
9.25234.9
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.9
24.75628.5
32.00812.8
1.50.7
2.41.1
3.11.4
4.01.8
5.72.6
7.53.4
9.74.4
13.46.1
22.210.1
16.57.5
27.512.5
54.624.8
31.014.1
81.637.1
154.070.0
111.050.0
213.097.0
293.0133.0
271.0123.0
458.0208.0
FB
D E
KA
H
r
FB
D E
KA
H
r
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 63
ASME - B16.5 ASME - B16.5
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.35
6.12155.6
6.50165.1
7.50190.5
8.25209.55
10.00254.0
9.00228.6
11.0279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.9323.6
1.1428.95
1.4135.8
1.7544.45
1.9850.5
2.5063.5
3.0076.2
3.6392.2
4.63117.6
4.13104.9
5.69144.5
8.75222.25
6.72171.45
10.88276.35
14.19360.4
12.94328.7
16.19411.2
20.19512.8
18.19462.0
24.19614.4
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.9
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.8847.6
1.7544.4
2.0050.8
2.4461.9
2.0652.4
2.6266.7
3.0076.2
2.8873.0
3.2582.5
3.7595.2
3.5088.9
4.19106.4
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
5.75146.05
5.25133.35
7.00177.8
10.25260.35
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.15
9.25234.95
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.5
32.00812.8
1.50.7
2.61.2
3.11.4
4.21.9
6.22.8
7.33.3
10.14.6
13.96.3
22.410.2
17.27.8
28.412.9
57.226
33.015.0
82.637.5
15872.0
11452.0
220.0100.0
304.0138.0
277.0126.0
469.0213.0
ASME B16.5
Threaded Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.9
1.1930.2
1.3133.3
1.2531.7
1.4436.5
1.7544.4
1.5639.7
1.9449.2
2.2557.1
2.1955.6
2.5063.5
2.8873.0
2.6968.3
3.2582.5
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
2.00.9
2.61.2
3.31.5
5.12.3
8.13.7
9.24.2
13.05.9
11.45.3
15.47.0
28.613
18.58.4
39.217.8
85.839
64.929.5
103.447
15068
119.054
20593
ASME B16.5
Threaded Flanges I Class 150
NB. Metric values are direct conversion from imperial sizes listed
No
Co
unte
r B
ore
Req
uire
d o
n 15
0 lb
. T
hrea
ded
Fla
nges
D
1/16” = 1.6mm
E
GKA
H
FBF
D
1/16” = 1.6mm
E
GKA
H
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel64
ASME - B16.5 ASME - B16.5
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
8
4
4
4
8
8
8
8
8
12
12
16
16
20
20
24
24
24
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.35
6.12155.6
6.50165.1
7.50190.5
8.25209.55
10.00254.0
9.00228.6
11.0279.4
15.00381.0
12.50317.5
17.50444.5
23.00584.2
20.50520.7
25.50647.7
30.50774.7
28.00711.2
36.00914.4
0.9323.6
1.1428.95
1.4135.8
1.7544.45
1.9850.5
2.5063.5
3.0076.2
3.6392.2
4.63117.6
4.13104.9
5.69144.5
8.75222.25
6.72171.45
10.88276.35
14.19360.4
12.94328.7
16.19411.2
20.19512.8
18.19462.0
24.19614.4
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.2531.8
1.1930.2
1.3834.9
1.6241.3
1.4436.5
1.8847.6
2.1254.0
2.0050.8
2.2557.2
2.5063.5
2.3860.3
2.7569.9
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.8847.6
1.7544.4
2.0050.8
2.4461.9
2.0652.4
2.6266.7
3.0076.2
2.8873.0
3.2582.5
3.7595.2
3.5088.9
4.19106.4
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
5.75146.05
5.25133.35
7.00177.8
10.25260.35
8.12206.4
12.62320.7
16.75425.4
14.75374.6
19.00482.6
23.12587.4
21.00533.4
27.62701.7
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
0.8822.2
0.8822.2
0.8822.2
1.0025.4
0.8822.2
1.1228.6
1.2531.7
1.2531.7
1.3834.9
1.3834.9
1.3834.9
1.6241.3
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
7.88200.0
7.25184.15
9.25234.95
13.00330.2
10.62269.9
15.25387.3
20.25514.3
17.75450.8
22.50571.5
27.00685.8
24.75628.5
32.00812.8
1.50.7
2.61.2
3.11.4
4.21.9
6.22.8
7.33.3
10.14.6
13.96.3
22.410.2
17.27.8
28.412.9
57.226
33.015.0
82.637.5
15872.0
11452.0
220.0100.0
304.0138.0
277.0126.0
469.0213.0
ASME B16.5
Threaded Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
24
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
16
16
20
20
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
9.00228.6
8.50215.9
10.0254.0
13.50342.9
11.00279.4
16.00406.4
21.00533.4
19.00482.6
23.50596.9
27.50698.5
25.00635.0
32.00812.8
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.2
0.9423.8
0.9423.8
0.9423.8
0.9423.8
1.1228.6
1.0025.4
1.1930.2
1.3834.9
1.2531.8
1.4436.5
1.6942.9
1.5639.7
1.8847.6
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.9
1.1930.2
1.3133.3
1.2531.7
1.4436.5
1.7544.4
1.5639.7
1.9449.2
2.2557.1
2.1955.6
2.5063.5
2.8873.0
2.6968.3
3.2582.5
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
5.31134.9
4.81122.2
6.44163.5
9.69246.1
7.56192.1
12.00304.8
15.75400.0
14.38365.1
18.00457.2
22.00558.8
19.88504.8
26.12663.6
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
6.19157.2
5.50139.7
7.31185.7
10.62269.9
8.50215.9
12.75323.8
16.25412.7
15.00381.0
18.50469.9
23.00584.2
21.00533.4
27.25692.1
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.8822.2
0.8822.2
1.0025.4
1.1228.6
1.0025.4
1.1228.6
1.2531.7
1.2531.7
1.3834.9
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
7.50190.5
7.00177.8
8.50215.9
11.75298.4
9.50241.3
14.25361.9
18.75476.2
17.00431.8
21.25539.7
25.00635.0
22.75577.8
29.50749.3
0.90.4
1.50.7
2.00.9
2.61.2
3.31.5
5.12.3
8.13.7
9.24.2
13.05.9
11.45.3
15.47.0
28.613
18.58.4
39.217.8
85.839
64.929.5
103.447
15068
119.054
20593
ASME B16.5
Threaded Flanges I Class 150
NB. Metric values are direct conversion from imperial sizes listed
No
Co
unte
r B
ore
Req
uire
d o
n 15
0 lb
. T
hrea
ded
Fla
nges
D
1/16” = 1.6mm
E
GKA
H
FBF
D
1/16” = 1.6mm
E
GKA
H
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 65
ASME - B16.5 ASME - B16.5
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
4
4
4
4
4
4
4
4
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
0.6215.7
0.8220.8
1.0526.7
1.3835.05
1.6140.9
2.0752.6
2.4762.7
3.0778.0
B1
0.8822.35
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
C
0.389.50
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.3
0.9423.8
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.1930.2
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
0.90.4
1.50.7
2.00.9
2.61.2
3.31.5
5.12.3
8.13.7
9.24.2
ASME B16.5
Socket Welding Flanges I Class 150
NB. Metric values are direct conversion from imperial sizes listed
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
4
4
8
4
4
4
8
8
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.35
6.12155.6
6.50165.1
7.50190.5
8.25209.55
0.6215.7
0.8220.8
1.0526.7
1.3835.05
1.6140.9
2.0752.6
2.4762.7
3.0778.0
B1
0.8822.35
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
C
0.389.50
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
1.50.7
2.61.2
3.11.4
4.21.9
6.22.8
7.33.3
10.14.6
13.96.3
ASME B16.5
Socket Welding Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed
FB1
D
1/16” = 1.6mm
E
GB
KA
HC
FB1
D
1/16” = 1.6mm
E
GB
KA
HC
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel66
ASME - B16.5 ASME - B16.5
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
4
4
4
4
4
4
4
4
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.5088.9
3.8898.4
4.25107.9
4.62117.5
5.00127.0
6.00152.4
7.00177.8
7.50190.5
0.6215.7
0.8220.8
1.0526.7
1.3835.05
1.6140.9
2.0752.6
2.4762.7
3.0778.0
B1
0.8822.35
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
C
0.389.50
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8822.3
0.9423.8
0.6215.9
0.6215.9
0.6917.5
0.8120.6
0.8822.2
1.0025.4
1.1228.6
1.1930.2
1.1930.2
1.5038.1
1.9449.2
2.3158.7
2.5665.1
3.0677.8
3.5690.5
4.25107.9
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.6215.9
0.7519.0
0.7519.0
0.7519.0
2.3860.3
2.7569.8
3.1279.4
3.5088.9
3.8898.4
4.75120.6
5.50139.7
6.00152.4
0.90.4
1.50.7
2.00.9
2.61.2
3.31.5
5.12.3
8.13.7
9.24.2
ASME B16.5
Socket Welding Flanges I Class 150
NB. Metric values are direct conversion from imperial sizes listed
NominalSize
1 1/4
1 1/2
2 1/2
1
3/4
1/2
2
3
4
4
8
4
4
4
8
8
KDA B F HNumber
FlangeRaisedFaceHub Drilling
Approx WeightPounds
KiloE G
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
inchesmm
3.7595.2
4.62117.5
4.88123.8
5.25133.35
6.12155.6
6.50165.1
7.50190.5
8.25209.55
0.6215.7
0.8220.8
1.0526.7
1.3835.05
1.6140.9
2.0752.6
2.4762.7
3.0778.0
B1
0.8822.35
1.0927.7
1.3634.5
1.7043.2
1.9549.5
2.4462.0
2.9474.7
3.5790.7
C
0.389.50
0.4411.1
0.5012.7
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.5614.3
0.6215.9
0.6917.5
0.7519.0
0.8120.6
0.8822.2
1.0025.4
1.1228.6
0.8822.2
1.0025.4
1.0627.0
1.0627.0
1.1930.2
1.3133.3
1.5038.1
1.6942.9
1.5038.1
1.8847.6
2.1254.0
2.5063.5
2.7569.8
3.3184.1
3.94100.0
4.62117.5
1.3834.9
1.6942.9
2.0050.8
2.5063.5
2.8873.0
3.6292.1
4.12104.8
5.00127.0
0.6215.9
0.7519.0
0.7519.0
0.7519.0
0.8822.2
0.7519.0
0.8822.2
0.8822.2
2.6266.7
3.2582.5
3.5088.9
3.8898.4
4.50114.3
5.00127.0
5.88149.2
6.62168.3
1.50.7
2.61.2
3.11.4
4.21.9
6.22.8
7.33.3
10.14.6
13.96.3
ASME B16.5
Socket Welding Flanges I Class 300
NB. Metric values are direct conversion from imperial sizes listed
FB1
D
1/16” = 1.6mm
E
GB
KA
HC
FB1
D
1/16” = 1.6mm
E
GB
KA
HC
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 67
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.9 ASME - B16.9
ASME B16.9 I Dimensions Of Elbows
1
1 1/4
1 1/2
2
2 1/2
3/4
1/2
3
4
5
6
8
10
12
16
18
20
22
24
14
38
48
38
38
57
76
95
114
152
190
229
305
381
457
610
686
762
838
914
533
16
25
19
22
29
35
44
51
64
79
95
127
159
190
254
286
318
343
381
222
-
32
-
25
38
51
64
76
102
127
152
203
254
305
406
457
508
559
610
356
15
32
20
25
40
50
65
80
100
125
150
200
250
300
400
450
500
550
600
350
21.3
42.2
26.7
33.4
48.3
60.3
73.0
88.9
114.3
141.3
168.3
219.1
273.0
323.8
406.4
457.0
508.0
559.0
610.0
355.6
Center-to-End
mm
45 Deg LR Elbows, B
mm
90 Deg SR Elbows, A
mm
90 Deg LR Elbows, A
in
Nominal Pipe Size[NPS]
mm
DN
mm
Outside Diameterat Bevel
ASME B16.9 I Dimensions Of Equal And Reducing Tees
x 1 1/4
x 1
x 3/4
x 1 1/2
2 x 2
57
51
44
60
64
42.2
33.4
26.7
48.3
60.360.3 64
x 1/2
1 x 1
x 3/4
x 1/2
1 1/4 x 1 1/4
x 1
x 3/4
x 1/2
1 1/2 x 1 1/2
x 1 1/4
x 1
3/4 x 3/4
1/2 x 1/2
x 3/4
x 1/2
29
38
38
38
48
48
48
48
57
57
57
29
25
57
57
21.3
33.4
26.7
21.3
42.2
33.4
26.7
21.3
48.3
42.2
33.4
26.7
21.3
26.7
21.3
33.4
42.2
48.3
26.7
21.3
mm mm
Outlet [1] MRun D
38
48
57
29
25
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
2 1/2 x 2 1/2
x 2
x 1 1/2
x 1 1/4
x 1
3 x 3
x 2 1/2
x 2
x 1 1/2
x 1 1/4
76
70
67
64
57
86
83
76
73
70
73.0
60.3
48.3
42.2
33.4
88.9
73.0
60.3
48.3
42.2
73.0
88.9
mm mm
Outlet [1] MRun D
76
86
4 x 4
x 3 1/2
x 3
x 2 1/2
x 2
x 1 1/2
5 x 5
x 4
x 3 1/2
105
102
98
95
89
86
124
117
114
114.3
101.6
88.9
73.0
60.3
48.3
141.3
114.3
101.6
114.3
141.3
105
124
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
x 3
x 2 1/2
x 2
111
108
105
88.9
73.0
60.3
A
A
B
B
A
A
C C
D
T
T1
D1
M
D
T
T1
D1
C C
M
68
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.9 ASME - B16.9
ASME B16.9 I Dimensions Of Elbows
1
1 1/4
1 1/2
2
2 1/2
3/4
1/2
3
4
5
6
8
10
12
16
18
20
22
24
14
38
48
38
38
57
76
95
114
152
190
229
305
381
457
610
686
762
838
914
533
16
25
19
22
29
35
44
51
64
79
95
127
159
190
254
286
318
343
381
222
-
32
-
25
38
51
64
76
102
127
152
203
254
305
406
457
508
559
610
356
15
32
20
25
40
50
65
80
100
125
150
200
250
300
400
450
500
550
600
350
21.3
42.2
26.7
33.4
48.3
60.3
73.0
88.9
114.3
141.3
168.3
219.1
273.0
323.8
406.4
457.0
508.0
559.0
610.0
355.6
Center-to-End
mm
45 Deg LR Elbows, B
mm
90 Deg SR Elbows, A
mm
90 Deg LR Elbows, A
in
Nominal Pipe Size[NPS]
mm
DN
mm
Outside Diameterat Bevel
ASME B16.9 I Dimensions Of Equal And Reducing Tees
x 1 1/4
x 1
x 3/4
x 1 1/2
2 x 2
57
51
44
60
64
42.2
33.4
26.7
48.3
60.360.3 64
x 1/2
1 x 1
x 3/4
x 1/2
1 1/4 x 1 1/4
x 1
x 3/4
x 1/2
1 1/2 x 1 1/2
x 1 1/4
x 1
3/4 x 3/4
1/2 x 1/2
x 3/4
x 1/2
29
38
38
38
48
48
48
48
57
57
57
29
25
57
57
21.3
33.4
26.7
21.3
42.2
33.4
26.7
21.3
48.3
42.2
33.4
26.7
21.3
26.7
21.3
33.4
42.2
48.3
26.7
21.3
mm mm
Outlet [1] MRun D
38
48
57
29
25
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
2 1/2 x 2 1/2
x 2
x 1 1/2
x 1 1/4
x 1
3 x 3
x 2 1/2
x 2
x 1 1/2
x 1 1/4
76
70
67
64
57
86
83
76
73
70
73.0
60.3
48.3
42.2
33.4
88.9
73.0
60.3
48.3
42.2
73.0
88.9
mm mm
Outlet [1] MRun D
76
86
4 x 4
x 3 1/2
x 3
x 2 1/2
x 2
x 1 1/2
5 x 5
x 4
x 3 1/2
105
102
98
95
89
86
124
117
114
114.3
101.6
88.9
73.0
60.3
48.3
141.3
114.3
101.6
114.3
141.3
105
124
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
x 3
x 2 1/2
x 2
111
108
105
88.9
73.0
60.3
A
A
B
B
A
A
C C
D
T
T1
D1
M
D
T
T1
D1
C C
M
69
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.9 ASME - B16.9
6 x 6 168.3 168.3 143 143
x 3 1/2 101.6 127
x 5 141.3 137
x 4 114.3 130
x 3 88.9 124
x 2 1/2 73.0 121
8 x 8 219.1 219.1 178 178
x 6 168.3 168
x 5 141.3 162
x 4 114.3 156
x 3 1/2 101.6 152
10 x 10 273.0 273.0 216 216
x 8 219.1 203
x 6 168.3 194
x 5 141.3 191
x 4 114.3 184
12 x 12 323.8 323.8 254 254
x 10 273.0 241
x 8 219.1 229
x 6 168.3 219
x 5 141.3 216
14 x 14 355.6 355.6 279 279
x 12 323.8 270
x 10 273.0 257
x 8 219.1 248
x 6 168.3 238
16 x 16 406.4 406.4 305 305
x 10 273.0 283
x 14 355.6 305
x 12 323.8 295
x 8 219.1 273
x 6 168.3 264
18 x 18 457.0 457.0 343 343
x 16 406.4 330
x 14 355.6 330
x 12 323.8 321
x 10 273.0 308
x 8 219.1 298
20 x 20 508.0 508.0 381 381
x 18 457.0 368
x 16 406.4 356
x 14 355.6 356
x 12 323.8 346
x 10 273.0 333
x 8 219.1 324
x 20 508.0 406
22 x 22 559.0 559.0 419 419
x 18 457.0 394
x 16 406.4 381
x 14 355.6 381
x 12 323.8 371
x 10 273.0 359
24 x 24 610.0 610.0 432 432
x 22 559.0 432
x 20 508.0 432
x 18 457.0 419
x 16 406.4 406
x 14 355.6 406
x 12 323.8 397
x 10 273.0 384
ASME B16.9 I Dimensions Of Equal And Reducing Tees
mm mm
Outlet [1] MRun D
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
mm mm
Outlet [1] MRun D
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
ASME B16.9 I Dimensions Of Concentric And Eccentric Reducers
mm
D
mmmm
D1NominalPipe Size
[NPS]
Outside Diameterat Bevel End-to-End
(H)
273.0
x 4 114.3
x 6 168.3
x 5 141.3
10 x 8 273.0 219.1 178
x 8 219.1
x 6 168.3
x 5 141.3
12 x 10 323.8 273.0 203
x 10 273.0
x 8 219.1
x 6 168.3
14 x 12 355.6 323.8 330
x 12 323.8
x 10 273.0
x 8 219.1
x 6 168.3
16 x 14 406.4 355.6 356
x 10
x 14 355.6
x 12 323.8
18 x 16 457.0 406.4 381
x 16 406.4
x 14 355.6
x 12 323.8
20 x 18 508.0 457.0 508
22 x 20 559.0 508.0 508
x 18 457.0
x 16 406.4
x 14 355.4
x 20 508.0
x 18 457.0
x 16 406.4
24 x 22 610.0 559.0 508
mm
D
mmmm
D1NominalPipe Size
[NPS]
Outside Diameterat Bevel End-to-End
(H)
26.7 21.3 383/4 x 1/2
33.4 26.7 511 x 3/4
21.3x 1/2
21.3x 1/2
42.2 33.4 511 1/4 x 1
26.7x 3/4
48.3 42.2 641 1/2 x 1 1/4
33.4x 1
26.7x 3/4
21.3x 1/2
60.3 48.3 762 x 1 1/2
42.2x 1 1/4
33.4x 1
26.7x 3/4
73.0 60.3 882 1/2 x 2
48.3x 1 1/2
42.2x 1 1/4
33.4x 1
88.9 73.0 883 x 2 1/2
60.3x 2
48.3x 1 1/2
42.2x 1 1/4
114.3 101.6 1024 x 3 1/2
88.9x 3
73.0x 2 1/2
60.3x 2
48.3x 1 1/2
141.3 114.3 1275 x 4
101.6x 3 1/2
88.9x 3
73.0x 2 1/2
168.3 141.3 1406 x 5
114.3x 4
101.6x 3 1/2
88.9x 3
73.0x 2 1/2
219.1 168.3 1528 x 6
141.3x 5
114.3x 4
101.6x 3 1/2
C C
D
T
T1
D1
M
D
T
T1
D1
C C
M
T1
D1
T
D
H
T1
D1
T
D
H
70
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.9 ASME - B16.9
6 x 6 168.3 168.3 143 143
x 3 1/2 101.6 127
x 5 141.3 137
x 4 114.3 130
x 3 88.9 124
x 2 1/2 73.0 121
8 x 8 219.1 219.1 178 178
x 6 168.3 168
x 5 141.3 162
x 4 114.3 156
x 3 1/2 101.6 152
10 x 10 273.0 273.0 216 216
x 8 219.1 203
x 6 168.3 194
x 5 141.3 191
x 4 114.3 184
12 x 12 323.8 323.8 254 254
x 10 273.0 241
x 8 219.1 229
x 6 168.3 219
x 5 141.3 216
14 x 14 355.6 355.6 279 279
x 12 323.8 270
x 10 273.0 257
x 8 219.1 248
x 6 168.3 238
16 x 16 406.4 406.4 305 305
x 10 273.0 283
x 14 355.6 305
x 12 323.8 295
x 8 219.1 273
x 6 168.3 264
18 x 18 457.0 457.0 343 343
x 16 406.4 330
x 14 355.6 330
x 12 323.8 321
x 10 273.0 308
x 8 219.1 298
20 x 20 508.0 508.0 381 381
x 18 457.0 368
x 16 406.4 356
x 14 355.6 356
x 12 323.8 346
x 10 273.0 333
x 8 219.1 324
x 20 508.0 406
22 x 22 559.0 559.0 419 419
x 18 457.0 394
x 16 406.4 381
x 14 355.6 381
x 12 323.8 371
x 10 273.0 359
24 x 24 610.0 610.0 432 432
x 22 559.0 432
x 20 508.0 432
x 18 457.0 419
x 16 406.4 406
x 14 355.6 406
x 12 323.8 397
x 10 273.0 384
ASME B16.9 I Dimensions Of Equal And Reducing Tees
mm mm
Outlet [1] MRun D
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
mm mm
Outlet [1] MRun D
mm
Run C
mm
Outlet D1NominalPipe Size
[NPS]
Outside Diameterat Bevel Center-to-End
ASME B16.9 I Dimensions Of Concentric And Eccentric Reducers
mm
D
mmmm
D1NominalPipe Size
[NPS]
Outside Diameterat Bevel End-to-End
(H)
273.0
x 4 114.3
x 6 168.3
x 5 141.3
10 x 8 273.0 219.1 178
x 8 219.1
x 6 168.3
x 5 141.3
12 x 10 323.8 273.0 203
x 10 273.0
x 8 219.1
x 6 168.3
14 x 12 355.6 323.8 330
x 12 323.8
x 10 273.0
x 8 219.1
x 6 168.3
16 x 14 406.4 355.6 356
x 10
x 14 355.6
x 12 323.8
18 x 16 457.0 406.4 381
x 16 406.4
x 14 355.6
x 12 323.8
20 x 18 508.0 457.0 508
22 x 20 559.0 508.0 508
x 18 457.0
x 16 406.4
x 14 355.4
x 20 508.0
x 18 457.0
x 16 406.4
24 x 22 610.0 559.0 508
mm
D
mmmm
D1NominalPipe Size
[NPS]
Outside Diameterat Bevel End-to-End
(H)
26.7 21.3 383/4 x 1/2
33.4 26.7 511 x 3/4
21.3x 1/2
21.3x 1/2
42.2 33.4 511 1/4 x 1
26.7x 3/4
48.3 42.2 641 1/2 x 1 1/4
33.4x 1
26.7x 3/4
21.3x 1/2
60.3 48.3 762 x 1 1/2
42.2x 1 1/4
33.4x 1
26.7x 3/4
73.0 60.3 882 1/2 x 2
48.3x 1 1/2
42.2x 1 1/4
33.4x 1
88.9 73.0 883 x 2 1/2
60.3x 2
48.3x 1 1/2
42.2x 1 1/4
114.3 101.6 1024 x 3 1/2
88.9x 3
73.0x 2 1/2
60.3x 2
48.3x 1 1/2
141.3 114.3 1275 x 4
101.6x 3 1/2
88.9x 3
73.0x 2 1/2
168.3 141.3 1406 x 5
114.3x 4
101.6x 3 1/2
88.9x 3
73.0x 2 1/2
219.1 168.3 1528 x 6
141.3x 5
114.3x 4
101.6x 3 1/2
C C
D
T
T1
D1
M
D
T
T1
D1
C C
M
T1
D1
T
D
H
T1
D1
T
D
H
71
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.9 ASME - B16.9
Notes: (1) Length E applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length E”.(2) Length E1 applies for thickness greater than that given in column “Limiting Wall Thickness” for NPS 24
(DN 600) and smaller. For NPS 26 (DN 65) and larger, lenght E1 shall be by agreement betweenmanufacturer and purchaser.
ASME B16.9 I Dimensions Of Caps
1
1 1/4
1 1/2
2
2 1/2
3/4
1/2
3
4
5
6
8
10
12
16
18
20
22
24
14
mm
Limiting Wall Thicknessfor Length E
mm
Length [2]E1
mm
Length [1]E
in
Nominal Pipe Size[NPS]
mm
Outside Diameterat Bevel
4.57
3.81
4.57
5.59
4.83
5.08
7.11
7.62
8.64
9.65
10.92
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
25
25
38
44
38
38
51
64
76
89
102
127
152
178
191
203
229
254
254
305
25
25
38
38
38
38
38
51
64
76
89
102
127
152
165
178
203
229
254
267
21.3
26.7
33.4
60.3
42.2
48.3
73.0
88.9
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
457.0
508.0
559.0
610.0
General Notes:Tolerances are equal plus and minus except as noted.
Notes: (1) Out-of-round is the sum of absolute values of plus and minus tolerance.(2) The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser.
Wall thickness tolerance applies throughout the fittings.(3) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside diameter,
which equals the difference between the nominal outside diameter and twice the nominal wall thickness.
ASME B16.9 I Dimensions Tolerance
Not Lessthan
87.5%of
nominalthicknessmarked
onfittings
NominalPipe Size
[NPS]
in mm mm mm mm mmmm mm mm mm mm mm
Caps
E
OutsideDiameterat Bevel[Notes[1],[2]]
InsideDiameter
at End[Notes
[1],[3],[4]
90deg,45deg Longand Short
RadiusElbows
WallThickness[Notes[3]]
OverallLengthof Cap,
E
Tees ReducersOff
AngleQ
3REllbows
A,B C, M HA,B
OffPlane
P
All FittingsOverallLength
Center to EndDimension
1/2 to 21/2 +1.6, -0.8 ±0.8 ±3 ±2 ±2 ±2±3 ±3±1 ±2
3 to 4 ±1.6 ±1.6 ±3 ±2 ±2 ±2±3 ±3±1 ±2
5 to 8 +2.4, -1.6 ±1.6 ±6 ±2 ±2 ±2±3 ±6±2 ±4
10 to 12 +4.0, -3.2 ±3.2 ±6 ±2 ±2 ±2±3 ±6±3 ±5
14 to 16 +4.0, -3.2 ±3.2 ±6 ±2 ±2 ±2±3 ±6±3 ±6
18 +4.0, -3.2 ±3.2 ±6 ±2 ±2 ±2±3 ±6±4 ±10
20 to 24 +6.4, -4.8 ±4.8 ±6 ±2 ±2 ±2±3 ±6±4 ±10
Angularity
T 1D
0D
E o
r E
1
A A
Q
Q Q
Tees
This end flush against square
A
Q
Q
Q
Q
72
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
ASME - B16.9 ASME - B16.9
Notes: (1) Length E applies for thickness not exceeding that given in column “Limiting Wall Thickness for Length E”.(2) Length E1 applies for thickness greater than that given in column “Limiting Wall Thickness” for NPS 24
(DN 600) and smaller. For NPS 26 (DN 65) and larger, lenght E1 shall be by agreement betweenmanufacturer and purchaser.
ASME B16.9 I Dimensions Of Caps
1
1 1/4
1 1/2
2
2 1/2
3/4
1/2
3
4
5
6
8
10
12
16
18
20
22
24
14
mm
Limiting Wall Thicknessfor Length E
mm
Length [2]E1
mm
Length [1]E
in
Nominal Pipe Size[NPS]
mm
Outside Diameterat Bevel
4.57
3.81
4.57
5.59
4.83
5.08
7.11
7.62
8.64
9.65
10.92
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
25
25
38
44
38
38
51
64
76
89
102
127
152
178
191
203
229
254
254
305
25
25
38
38
38
38
38
51
64
76
89
102
127
152
165
178
203
229
254
267
21.3
26.7
33.4
60.3
42.2
48.3
73.0
88.9
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
457.0
508.0
559.0
610.0
General Notes:Tolerances are equal plus and minus except as noted.
Notes: (1) Out-of-round is the sum of absolute values of plus and minus tolerance.(2) The inside diameter and the nominal wall thicknesses at ends are to be specified by the purchaser. Wall thickness tolerance applies throughout the fittings.(3) Unless otherwise specified by the purchaser, these tolerances apply to the nominal inside diameter,
which equals the difference between the nominal outside diameter and twice the nominal wall thickness.
ASME B16.9 I Dimensions Tolerance
Not Lessthan
87.5%of
nominalthicknessmarked
onfittings
NominalPipe Size
[NPS]
in mm mm mm mm mmmm mm mm mm mm mm
Caps
E
OutsideDiameterat Bevel[Notes[1],[2]]
InsideDiameter
at End[Notes
[1],[3],[4]
90deg,45deg Longand Short
RadiusElbows
WallThickness[Notes[3]]
OverallLengthof Cap,
E
Tees ReducersOff
AngleQ
3REllbows
A,B C, M HA,B
OffPlane
P
All FittingsOverallLength
Center to EndDimension
1/2 to 21/2 +1.6, -0.8 ±0.8 ±3 ±2 ±2 ±2±3 ±3±1 ±2
3 to 4 ±1.6 ±1.6 ±3 ±2 ±2 ±2±3 ±3±1 ±2
5 to 8 +2.4, -1.6 ±1.6 ±6 ±2 ±2 ±2±3 ±6±2 ±4
10 to 12 +4.0, -3.2 ±3.2 ±6 ±2 ±2 ±2±3 ±6±3 ±5
14 to 16 +4.0, -3.2 ±3.2 ±6 ±2 ±2 ±2±3 ±6±3 ±6
18 +4.0, -3.2 ±3.2 ±6 ±2 ±2 ±2±3 ±6±4 ±10
20 to 24 +6.4, -4.8 ±4.8 ±6 ±2 ±2 ±2±3 ±6±4 ±10
Angularity
T 1D
0D
E o
r E
1
A A
Q
Q Q
Tees
This end flush against square
A
Q
Q
Q
Q
73
ASME - B16.9 BS 3799
ASME B16.9 I Welding End Preparations
Nominal Wall Thickness, t End Preparation
Less than x [Note]Cut square or slightly chamfer,at manufacturer’s option [not illustrated].
x to 22 [0.88], inclusive Plain bevel as in sketch [a] above.
More than 22 [0.88] Compound bevel as in sketch [b] above.
General Notes:(a) Dimensions in parentheses are in inches.(b) Other domensions are in millimeters.
Note: x = 5 (0.19) for carbon steel or ferritic alloy steel.
t ≤ 22 (0.88) max.
37.5 deg ± 2.5 deg
37.5 deg ± 2.5 deg
Rad
10 deg ± 2.5 deg
t > 22 (0.88)
19 (0.75)
1.5 (0.06) ± 1.0 (0.03)(Root face)
1.5 (0.06) ± 1.0 (0.03)(Root face)
D
(a) Plain Bevel (b) Compound Bevel
D
3/4 x1/4
3/4 x1/2
3/4 x3/5
21/2 x 2
21/2 x 11/2
4 x 3
4 x 21/2
1 x 3/41 x 1/2
11/2 x 1
11/2 x3/4
11/2 x1/2
3 x 21/2
3 x 2
3 x 11/2
2 x 11/22 x 1
2 x 1/22 x 3/4
1/2 x1/4
1/2 x3/4
10 x 8
20 x 15
20 x 10
65 x 50
65 x 40
100 x 80
100 x 65
25 x 20
25 x 15
40 x 25
40 x 20
40 x 15
80 x 65
80 x 50
80 x 40
50 x 40
50 x 25
50 x 15
50 x 20
15 x 8
15 x 10
76
95
95
178
178
229
229
102
102
114
114
114
203
203
203
165
165
165
165
89
89
48
57
57
114
114
140
140
64
64
70
70
70
133
133
133
108
108
108
108
56
56
16
22
22
32
32
48
48
22
22
25
25
25
41
41
41
29
29
29
29
19
19
1.6
2.4
4.0
4.8
10.3
11.9
19.1
2.8
5.2
6.7
9.5
11.9
7.1
11.9
17.5
5.6
12.7
17.5
15.5
3.2
1.6
-
2.4
-
3.2
8.3
10.7
17.5
2.0
4.4
6.4
8.3
10.7
6.7
9.9
15.5
5.2
11.5
15.9
13.5
-
-
-
Schedule 160
Schedule80
Schedule160
Doubleextra
strong
-
-
-
-
XXS
-
-
-
Dimensions of swage nipples
Fittings I BS 3799
* Thickness and outside diameters of swage nipples shall correspond to those of the appropriate nominal pipe size.
Nominal Size
Parallel length Eccentricity E Thickness T and † *
mmmmin
minA
mm
minB
mm
minC
mm
3000
mm
6000 Screwed/Plain3000
Plain6000
Screwed6000
C
E
B
T
A
Plain
Eccentric Concentric
Screwed Screwed Plain
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel74
ASME - B16.9 BS 3799
ASME B16.9 I Welding End Preparations
Nominal Wall Thickness, t End Preparation
Less than x [Note]Cut square or slightly chamfer,at manufacturer’s option [not illustrated].
x to 22 [0.88], inclusive Plain bevel as in sketch [a] above.
More than 22 [0.88] Compound bevel as in sketch [b] above.
General Notes:(a) Dimensions in parentheses are in inches.(b) Other domensions are in millimeters.
Note: x = 5 (0.19) for carbon steel or ferritic alloy steel.
t ≤ 22 (0.88) max.
37.5 deg ± 2.5 deg
37.5 deg ± 2.5 deg
Rad
10 deg ± 2.5 deg
t > 22 (0.88)
19 (0.75)
1.5 (0.06) ± 1.0 (0.03)(Root face)
1.5 (0.06) ± 1.0 (0.03)(Root face)
D
(a) Plain Bevel (b) Compound Bevel
D
3/4 x 1/4
3/4 x 1/23/4 x 3/5
21/2 x 2
21/2 x 11/2
4 x 3
4 x 21/2
1 x 3/41 x 1/2
11/2 x 1
11/2 x 3/411/2 x 1/2
3 x 21/2
3 x 2
3 x 11/2
2 x 11/22 x 1
2 x 1/22 x 3/4
1/2 x 1/4
1/2 x 3/4
10 x 8
20 x 15
20 x 10
65 x 50
65 x 40
100 x 80
100 x 65
25 x 20
25 x 15
40 x 25
40 x 20
40 x 15
80 x 65
80 x 50
80 x 40
50 x 40
50 x 25
50 x 15
50 x 20
15 x 8
15 x 10
76
95
95
178
178
229
229
102
102
114
114
114
203
203
203
165
165
165
165
89
89
48
57
57
114
114
140
140
64
64
70
70
70
133
133
133
108
108
108
108
56
56
16
22
22
32
32
48
48
22
22
25
25
25
41
41
41
29
29
29
29
19
19
1.6
2.4
4.0
4.8
10.3
11.9
19.1
2.8
5.2
6.7
9.5
11.9
7.1
11.9
17.5
5.6
12.7
17.5
15.5
3.2
1.6
-
2.4
-
3.2
8.3
10.7
17.5
2.0
4.4
6.4
8.3
10.7
6.7
9.9
15.5
5.2
11.5
15.9
13.5
-
-
-
Schedule 160
Schedule80
Schedule160
Doubleextra
strong
-
-
-
-
XXS
-
-
-
Dimensions of swage nipples
Fittings I BS 3799
* Thickness and outside diameters of swage nipples shall correspond to those of the appropriate nominal pipe size.
Nominal Size
Parallel length Eccentricity E Thickness T and † *
mmmmin
minA
mm
minB
mm
minC
mm
3000
mm
6000 Screwed/Plain3000
Plain6000
Screwed6000
C
E
B
T
A
Plain
Eccentric Concentric
Screwed Screwed Plain
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel 75
76
ASME B16.9 MSS SP-43
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
I Dimensions of Lap-Joint Stub EndsASME B16.9
NominalPipeSize
ins mm ins mm ins mm ins mm ins mmins mm
MinMaxLength4
F
Radiusof Fillet2
R
OutsideDiameterat Bevel
OutsideDiameter at Lap
G
Outside Diameter of Barrel
1/23/41
1 1/41 1/2
3 1/2
2 1/22
3
4
5
6
8
10
12
14
16
18
20
2224
1.315
1.900
2.875
2.375
1.660
0.840
1.050
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
20.000
22.000
18.000
24.000
1.376
1.966
2.966
2.456
1.716
0.896
1.106
3.596
4.096
4.593
5.683
6.743
8.743
10.913
12.913
14.170
16.180
20.240
22.240
18.190
24.240
1.284
1.869
2.844
2.344
1.629
0.809
1.019
3.469
3.969
4.469
5.532
6.594
8.594
10.719
12.719
13.969
15.969
19.969
21.969
17.969
23.969
32.6
47.5
72.2
59.5
41.4
20.6
25.9
88.1
100.8
113.5
140.5
167.5
218.3
272.3
323.0
354.8
405.6
507.2
558.0
456.4
608.8
33.4
48.1
73.0
60.3
42.1
21.34
26.6
88.9
101.6
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
508.0
558.8
457.2
609.6
2.000
2.875
4.125
3.625
2.500
1.375
1.687
5.000
5.500
6.187
7.312
8.500
10.625
12.750
15.000
16.250
18.500
23.000
25.250
21.000
27.250
4
4
6
6
4
3
3
6
6
6
8
8
8
10
101
121
121
121
121
121
121
50.8
73.0
104.8
92.1
63.5
34.9
42.9
127.0
139.7
157.2
185.7
215.9
269.9
323.9
381.0
412.8
469.9
584.2
641.4
533.4
692.2
101.6
101.6
152.4
152.4
101.6
76.2
76.2
152.4
152.4
152.4
203.2
203.2
203.2
254.0
254.0
304.8
304.8
304.8
304.8
304.8
304.8
34.9
49.9
75.3
62.4
43.6
22.8
28.1
91.3
104.0
116.7
144.3
171.3
222.1
277.2
328.0
359.9
411.0
514.1
564.9
462.0
615.7
0.125
0.250
0.312
0.312
0.187
0.125
0.125
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
3.18
6.35
7.94
7.94
4.76
3.18
3.18
9.53
9.53
11.11
11.11
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
The minimum lap thickness (T) shall not be less than nominal pipe wall thickness.1 When used with the higher pressure flanges it may be necessary to increase the length of stub ends in sizes
12in. and larger. Such increase in length shall be a matter of agreement between the manufacturer and purchaser.
2 These dimensions conform to the radius established for lap-joint flanges in American National Standard Steel Pipe Flanges and Flanged Fittings (ASME B16.5).
3 This dimension conforms to standard machined facings shown in the American National Standard Steel Pipe Flanges and Flanged Fittings (ASME B16.5). The back face of the lap shall be machined to conform to the surface on which it seats. Where ring joint facings are to be applied use dimension “K’ as given in ASME B16.5.
4 When special facings such as tongue-groove, male-female, etc., are employed, additional lap thickness must be provided and such additional thickness shall be in addition (not to be included in) the basic length “F”.
T
R
Note Square Corner
Enlarged Section of Lap
R
G
F
I Dimensions of Lap-Joint Stub EndsMSS SP-43
NominalPipeSize
ins mm ins mm ins mm ins mmins mm
B (max)A
LengthF*
Radius* of Fillet
OutsideDiameter
atBevel
OutsideDiameter
at LapG
Stub Ends
1/23/41
1 1/4
1 1/2
3 1/2
2 1/22
3
45
6
8
10
12
14
16
18
20
24
1.315
1.900
2.875
2.375
1.660
0.840
1.050
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
20.000
24.000
18.000
33.4
48.1
73.0
60.3
42.1
21.34
26.6
88.9
101.6
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
508.0
609.6
457.2
2.000
2.875
4.125
3.625
2.500
1.375
1.687
5.000
5.500
6.187
7.312
8.500
10.625
12.750
15.000
16.250
18.500
23.000
27.250
21.000
50.8
73.0
104.8
92.1
63.5
34.9
42.9
127.0
139.7
157.2
185.7
215.9
269.9
323.9
381.0
412.8
469.9
584.2
692.2
533.4
2.000
2.000
2.500
2.500
2.000
2.000
2.000
2.500
3.000
3.000
3.000
3.500
4.000
5.000
6.000
6.000
6.000
6.000
6.000
6.000
50.8
50.8
63.5
63.5
50.8
50.8
50.8
63.5
76.2
76.2
76.2
88.9
101.6
127.0
152.4
152.4
152.4
152.4
152.4
152.4
0.125
0.250
0.312
0.312
0.187
0.125
0.125
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
3.18
6.35
7.94
7.94
4.76
3.18
3.18
9.53
9.53
11.11
11.11
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
* These lengths and radii for use with Schedule 40S or thinner pipe.Note 1. The minimum lap thickness shall not be less than nominal pipe wall thickness.Note 2. Contact faces of stub ends shall have a modified spiral or concentric serration.
Note 1
LAP-JOINTFLANGE
Square Corner
Radius A
TYPE A for Lap-JOINT FLANGE
G
F
Note 1
SLIP-ONFLANGE
Square Corner
Radius B
TYPE B for SLIP-ON FLANGE
G
F
76
77
ASME B16.9 MSS SP-43
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
I Dimensions of Lap-Joint Stub EndsASME B16.9
NominalPipeSize
ins mm ins mm ins mm ins mm ins mmins mm
MinMaxLength4
F
Radiusof Fillet2
R
OutsideDiameterat Bevel
OutsideDiameter at Lap
G
Outside Diameter of Barrel
1/23/41
1 1/41 1/2
3 1/2
2 1/22
3
4
5
6
8
10
12
14
16
18
20
2224
1.315
1.900
2.875
2.375
1.660
0.840
1.050
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
20.000
22.000
18.000
24.000
1.376
1.966
2.966
2.456
1.716
0.896
1.106
3.596
4.096
4.593
5.683
6.743
8.743
10.913
12.913
14.170
16.180
20.240
22.240
18.190
24.240
1.284
1.869
2.844
2.344
1.629
0.809
1.019
3.469
3.969
4.469
5.532
6.594
8.594
10.719
12.719
13.969
15.969
19.969
21.969
17.969
23.969
32.6
47.5
72.2
59.5
41.4
20.6
25.9
88.1
100.8
113.5
140.5
167.5
218.3
272.3
323.0
354.8
405.6
507.2
558.0
456.4
608.8
33.4
48.1
73.0
60.3
42.1
21.34
26.6
88.9
101.6
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
508.0
558.8
457.2
609.6
2.000
2.875
4.125
3.625
2.500
1.375
1.687
5.000
5.500
6.187
7.312
8.500
10.625
12.750
15.000
16.250
18.500
23.000
25.250
21.000
27.250
4
4
6
6
4
3
3
6
6
6
8
8
8
10
101
121
121
121
121
121
121
50.8
73.0
104.8
92.1
63.5
34.9
42.9
127.0
139.7
157.2
185.7
215.9
269.9
323.9
381.0
412.8
469.9
584.2
641.4
533.4
692.2
101.6
101.6
152.4
152.4
101.6
76.2
76.2
152.4
152.4
152.4
203.2
203.2
203.2
254.0
254.0
304.8
304.8
304.8
304.8
304.8
304.8
34.9
49.9
75.3
62.4
43.6
22.8
28.1
91.3
104.0
116.7
144.3
171.3
222.1
277.2
328.0
359.9
411.0
514.1
564.9
462.0
615.7
0.125
0.250
0.312
0.312
0.187
0.125
0.125
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
3.18
6.35
7.94
7.94
4.76
3.18
3.18
9.53
9.53
11.11
11.11
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
The minimum lap thickness (T) shall not be less than nominal pipe wall thickness.1 When used with the higher pressure flanges it may be necessary to increase the length of stub ends in sizes
12in. and larger. Such increase in length shall be a matter of agreement between the manufacturer and purchaser.
2 These dimensions conform to the radius established for lap-joint flanges in American National Standard Steel Pipe Flanges and Flanged Fittings (ASME B16.5).
3 This dimension conforms to standard machined facings shown in the American National Standard Steel Pipe Flanges and Flanged Fittings (ASME B16.5). The back face of the lap shall be machined to conform to the surface on which it seats. Where ring joint facings are to be applied use dimension “K’ as given in ASME B16.5.
4 When special facings such as tongue-groove, male-female, etc., are employed, additional lap thickness mustbe provided and such additional thickness shall be in addition (not to be included in) the basic length “F”.
T
R
Note Square Corner
Enlarged Section of Lap
R
G
F
I Dimensions of Lap-Joint Stub EndsMSS SP-43
NominalPipeSize
ins mm ins mm ins mm ins mmins mm
B (max)A
LengthF*
Radius* of Fillet
OutsideDiameter
atBevel
OutsideDiameter
at LapG
Stub Ends
1/23/41
1 1/4
1 1/2
3 1/2
2 1/22
3
45
6
8
10
12
14
16
18
20
24
1.315
1.900
2.875
2.375
1.660
0.840
1.050
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
20.000
24.000
18.000
33.4
48.1
73.0
60.3
42.1
21.34
26.6
88.9
101.6
114.3
141.3
168.3
219.1
273.0
323.8
355.6
406.4
508.0
609.6
457.2
2.000
2.875
4.125
3.625
2.500
1.375
1.687
5.000
5.500
6.187
7.312
8.500
10.625
12.750
15.000
16.250
18.500
23.000
27.250
21.000
50.8
73.0
104.8
92.1
63.5
34.9
42.9
127.0
139.7
157.2
185.7
215.9
269.9
323.9
381.0
412.8
469.9
584.2
692.2
533.4
2.000
2.000
2.500
2.500
2.000
2.000
2.000
2.500
3.000
3.000
3.000
3.500
4.000
5.000
6.000
6.000
6.000
6.000
6.000
6.000
50.8
50.8
63.5
63.5
50.8
50.8
50.8
63.5
76.2
76.2
76.2
88.9
101.6
127.0
152.4
152.4
152.4
152.4
152.4
152.4
0.125
0.250
0.312
0.312
0.187
0.125
0.125
0.375
0.375
0.437
0.437
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
3.18
6.35
7.94
7.94
4.76
3.18
3.18
9.53
9.53
11.11
11.11
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.031
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.062
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
0.79
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
1.59
* These lengths and radii for use with Schedule 40S or thinner pipe.Note 1. The minimum lap thickness shall not be less than nominal pipe wall thickness.Note 2. Contact faces of stub ends shall have a modified spiral or concentric serration.
Note 1
LAP-JOINTFLANGE
Square Corner
Radius A
TYPE A for Lap-JOINT FLANGE
G
F
Note 1
SLIP-ONFLANGE
Square Corner
Radius B
TYPE B for SLIP-ON FLANGE
G
F
77
REFERENCE
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
Seamless Pipes & Fittings Chemical Composition %
Nickel Alloys
FITTINGS
PIPES
Element
Nickel (Ni)
Copper (Cu)
Iron (Fe)
Manganese (Mn)
Carbon (C)
Silicon (Si)
Sulphur (S)
Chromium (Cr)
Phosphorus (P)
Cobalt (Co)
Molybdenum (Mo)
Aluminum (AI)
Tungsten (W)
Vanadium (V)
Titanium (Ti)
Columbium (Col)+ Tantalum (Ta)
99.000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
63.000
28.000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.250
0.400
0.350
0.150
0.350
0.010
-
-
-
-
Min Max
ASTM B161UNSN02200
ASTM B366UNSN02200
99.00 -
0.250
Min Max
ASTM B161UNSN02201
ASTM B366UNSN02201
-
34.000
2.500
2.000
0.300
0.500
0.024
Min Max
ASTM B165UNSN04400
ASTM B366UNSN04400
-
0.500
10.000
1.000
0.150
0.500
0.015
Min Max
ASTM B167UNSN06600
ASTM B366UNSN06600
Min Max
ASTM B167UNSN06601
ASTM B366UNSN06601
Min Max
ASTM B444UNSN06625
ASTM B366UNSN06625
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.400
0.350
0.020
0.350
0.010
-
-
-
-
72.000
-
6.000
-
-
-
-
14.000
-
-
-
-
-
-
-
-
17.000
-
-
-
-
-
-
-
-
63.000
1.000
-
1.500
0.100
0.500
0.015
58.000
-
Balance
-
-
-
-
21.000
-
-
-
1.000
-
-
-
-
25.000
-
-
-
1.700
-
-
-
-
-
-
5.000
0.500
0.100
0.500
0.015
58.000
-
-
-
-
-
-
-
20.000
-
-
8.000
-
-
3.150
-
23.000
0.015
1.000
10.000
0.400
0.400
4.150
-
-
Seamless Pipes & Fittings Chemical Composition %
Nickel Alloys
FITTINGS
PIPES
Element
Nickel (Ni)
Copper (Cu)
Iron (Fe)
Manganese (Mn)
Carbon (C)
Silicon (Si)
Sulphur (S)
Chromium (Cr)
Phosphorus (P)
Cobalt (Co)
Molybdenum (Mo)
Aluminum (AI)
Tungsten (W)
Vanadium (V)
Titanium (Ti)
Columbium (Col)+ Tantalum (Ta)
30.000
-
39.500
-
-
-
-
19.000
-
-
-
-
0.750
-
-
-
Min Max
ASTM B407UNSN08801
ASTM B366UNSN08801
-
1.500
-
-
-
34.000
0.500
-
1.500
0.100
1.000
0.015
22.000
-
-
-
30.000
-
39.500
-
0.050
-
-
19.000
-
-
-
0.150
0.150
-
-
-
Min Max
ASTM B407UNSN08810
ASTM B366UNSN08810
0.600
0.600
-
-
-
35.000
0.750
-
1.500
0.100
1.000
0.015
23.000
-
-
-
30.000
-
39.500
-
-
-
-
19.000
-
-
-
0.150
0.150
-
-
-
Min Max
ASTM B407UNSN08800
ASTM B366UNSN08800
0.600
0.600
-
-
-
35.000
0.750
-
1.500
0.100
1.000
0.015
23.000
-
-
-
30.000
-
39.500
-
0.060
-
-
19.000
-
-
-
0.150
0.150
-
-
-
Min Max
ASTM B407UNSN08811
ASTM B366UNSN08811
0.600
0.600
-
-
-
35.000
0.750
-
1.500
0.100
1.000
0.015
23.000
-
-
-
38.000
1.500
22.00
-
-
-
-
19.500
-
-
2.500
-
0.600
-
-
-
Min Max
ASTM B423UNSN08825
ASTM B366UNSN08811
0.200
1.200
-
-
-
46.000
3.000
-
1.000
0.050
0.500
0.030
23.500
-
-
3.500
Balance
-
2.000
-
-
-
-
20.000
-
-
12.500
-
-
-
2.500
-
Min Max
ASTM B622UNSN06022
ASTM B366UNSN06022
-
-
-
3.500
0.350
-
-
6.000
0.500
0.015
0.080
0.020
22.500
0.020
2.500
14.500
Balance
-
4.000
-
-
-
-
14.500
-
-
15.000
-
-
-
3.000
-
Min Max
ASTM B622UNSN10276
ASTM B366UNSN10276
-
-
-
4.500
0.350
-
-
7.000
1.000
0.010
0.080
0.030
16.500
0.040
2.500
17.000
80
REFERENCE
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
Seamless Pipes & Fittings Chemical Composition %
Nickel Alloys
FITTINGS
PIPES
Element
Nickel (Ni)
Copper (Cu)
Iron (Fe)
Manganese (Mn)
Carbon (C)
Silicon (Si)
Sulphur (S)
Chromium (Cr)
Phosphorus (P)
Cobalt (Co)
Molybdenum (Mo)
Aluminum (AI)
Tungsten (W)
Vanadium (V)
Titanium (Ti)
Columbium (Col)+ Tantalum (Ta)
99.000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
63.000
28.000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.250
0.400
0.350
0.150
0.350
0.010
-
-
-
-
Min Max
ASTM B161UNSN02200
ASTM B366UNSN02200
99.00 -
0.250
Min Max
ASTM B161UNSN02201
ASTM B366UNSN02201
-
34.000
2.500
2.000
0.300
0.500
0.024
Min Max
ASTM B165UNSN04400
ASTM B366UNSN04400
-
0.500
10.000
1.000
0.150
0.500
0.015
Min Max
ASTM B167UNSN06600
ASTM B366UNSN06600
Min Max
ASTM B167UNSN06601
ASTM B366UNSN06601
Min Max
ASTM B444UNSN06625
ASTM B366UNSN06625
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
0.400
0.350
0.020
0.350
0.010
-
-
-
-
72.000
-
6.000
-
-
-
-
14.000
-
-
-
-
-
-
-
-
17.000
-
-
-
-
-
-
-
-
63.000
1.000
-
1.500
0.100
0.500
0.015
58.000
-
Balance
-
-
-
-
21.000
-
-
-
1.000
-
-
-
-
25.000
-
-
-
1.700
-
-
-
-
-
-
5.000
0.500
0.100
0.500
0.015
58.000
-
-
-
-
-
-
-
20.000
-
-
8.000
-
-
3.150
-
23.000
0.015
1.000
10.000
0.400
0.400
4.150
-
-
Seamless Pipes & Fittings Chemical Composition %
Nickel Alloys
FITTINGS
PIPES
Element
Nickel (Ni)
Copper (Cu)
Iron (Fe)
Manganese (Mn)
Carbon (C)
Silicon (Si)
Sulphur (S)
Chromium (Cr)
Phosphorus (P)
Cobalt (Co)
Molybdenum (Mo)
Aluminum (AI)
Tungsten (W)
Vanadium (V)
Titanium (Ti)
Columbium (Col)+ Tantalum (Ta)
30.000
-
39.500
-
-
-
-
19.000
-
-
-
-
0.750
-
-
-
Min Max
ASTM B407UNSN08801
ASTM B366UNSN08801
-
1.500
-
-
-
34.000
0.500
-
1.500
0.100
1.000
0.015
22.000
-
-
-
30.000
-
39.500
-
0.050
-
-
19.000
-
-
-
0.150
0.150
-
-
-
Min Max
ASTM B407UNSN08810
ASTM B366UNSN08810
0.600
0.600
-
-
-
35.000
0.750
-
1.500
0.100
1.000
0.015
23.000
-
-
-
30.000
-
39.500
-
-
-
-
19.000
-
-
-
0.150
0.150
-
-
-
Min Max
ASTM B407UNSN08800
ASTM B366UNSN08800
0.600
0.600
-
-
-
35.000
0.750
-
1.500
0.100
1.000
0.015
23.000
-
-
-
30.000
-
39.500
-
0.060
-
-
19.000
-
-
-
0.150
0.150
-
-
-
Min Max
ASTM B407UNSN08811
ASTM B366UNSN08811
0.600
0.600
-
-
-
35.000
0.750
-
1.500
0.100
1.000
0.015
23.000
-
-
-
38.000
1.500
22.00
-
-
-
-
19.500
-
-
2.500
-
0.600
-
-
-
Min Max
ASTM B423UNSN08825
ASTM B366UNSN08811
0.200
1.200
-
-
-
46.000
3.000
-
1.000
0.050
0.500
0.030
23.500
-
-
3.500
Balance
-
2.000
-
-
-
-
20.000
-
-
12.500
-
-
-
2.500
-
Min Max
ASTM B622UNSN06022
ASTM B366UNSN06022
-
-
-
3.500
0.350
-
-
6.000
0.500
0.015
0.080
0.020
22.500
0.020
2.500
14.500
Balance
-
4.000
-
-
-
-
14.500
-
-
15.000
-
-
-
3.000
-
Min Max
ASTM B622UNSN10276
ASTM B366UNSN10276
-
-
-
4.500
0.350
-
-
7.000
1.000
0.010
0.080
0.030
16.500
0.040
2.500
17.000
81
82 Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
FITTINGS
PIPES
Element
Carbon ( C )
Manganese (Mn)
Phosphorus (P)
Sulphur (S)
Silicon (Si)
Nickel (Ni)
Chromium (Cr)
Molybdenum (Mo)
Nitrogen (N)
Copper (Cu)
Tungsten (W)
-
-
-
-
-
4.500
21.000
2.500
0.080
-
-
-
-
-
-
-
4.500
22.000
3.000
0.140
-
-
0.030
2.000
0.030
0.020
1.000
6.500
23.000
3.500
0.200
-
-
0.030
2.000
0.030
0.020
1.000
6.500
23.000
3.500
0.200
-
-
-
-
-
-
-
6.00
24.00
3.000
0.240
-
-
-
-
-
-
-
6.00
24.00
3.000
0.200
0.500
0.500
0.03
1.200
0.035
0.020
0.800
8.000
26.000
5.000
0.320
0.500
-
0.05
1.000
0.030
0.010
1.000
8.000
26.000
4.000
0.300
1.000
1.000
MinMin Max Min Max Min MaxMax
ASTM A790UNSS31803
ASTM A815UNSS31803
ASTM A790UNSS32205
ASTM A815UNSS32205
ASTM A790UNSS32750
ASTM A815UNSS32750
ASTM A790UNSS32760
ASTM A815UNSS32760
Seamless Pipes & Fittings Chemical Composition %
Duplex & Super Duplex
FITTINGS
PIPES
Element
Carbon ( C )
Manganese (Mn)
Phosphorus (P)
Sulphur (S)
Silicon (Si)
Nickel (Ni)
Chromium (Cr)
Molybdenum (Mo)
Nitrogen (N)
Copper (Cu)
-
-
-
-
-
17.500
19.500
6.000
0.180
0.500
-
-
-
-
-
23.000
19.000
4.000
0.100
1.000
0.020
1.000
0.030
0.010
0.800
18.500
20.500
6.500
0.220
1.000
0.020
2.000
0.040
0.030
1.000
28.000
23.000
5.000
-
2.000
MinMin Max Max
ASTM A312UNSS31254
ASTM A403UNSS31254
ASTM A312UNSN08904
ASTM A403UNSN08904
Austenitic Stainless Steels
Seamless Pipes & Fittings Chemical Composition % Seamless Pipes & Fittings Chemical Composition %
Copper Nickel 90/10 Cu Ni
FITTINGS
PIPES
Element
Carbon ( C )
Manganese (Mn)
Phosphorus (P)
Sulphur (S)
Nickel (Ni)
Copper (Cu)
Lead (Pb)
Iron (Fe) †
Zinc (Zn)
Total Impurities * including those inlighter type
-
0.500
-
-
10.000
Rem
-
1.500
-
Min Max
0.050
1.000
0.020
0.020
11.000
-
0.010
2.000
0.200
0.300
ASTM B466, UNS C70600, EEMUA 144
EEMUA 146, MSS SP43, MSS SP97
† The minimum iron content has been selected to improve erosion resistance.* Impurities are elements other than copper (including silver) iron, nickel (including cobalt) and manganese.** Determind on finished tube outside of heat affected zone (HAZ)
Type of fitting Size range
1in/30mm to4in/108mm
6in/159mm to36in/914mm
½in/16mm to2in/57mm
½in/16mm to2in/57mm
½in/16mm to2in/57mm
Butt weldingfittings
Socket weldfittings
Capillary brazedfittings
Compressionfittings
75˚C 100˚C38˚C 50˚C 75˚C 100˚C38˚C 50˚C
16.0
Use 20 bar
Use 20 bar
15.716.0 16.0
18.6 17.320.0 19.7
18.6 17.320.0 19.7
18.6 17.320.0 19.7
18.6 17.320.0 19.7
* ** *
16 bar rating 20 bar rating
MAXIMUM ALLOWABLE WORKING PRESSURE - bar
* In accordance with manufacturer’s recommendations.
Pressure/temperature ratings - fittings
82
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
FITTINGS
PIPES
Element
Carbon ( C )
Manganese (Mn)
Phosphorus (P)
Sulphur (S)
Silicon (Si)
Nickel (Ni)
Chromium (Cr)
Molybdenum (Mo)
Nitrogen (N)
Copper (Cu)
Tungsten (W)
-
-
-
-
-
4.500
21.000
2.500
0.080
-
-
-
-
-
-
-
4.500
22.000
3.000
0.140
-
-
0.030
2.000
0.030
0.020
1.000
6.500
23.000
3.500
0.200
-
-
0.030
2.000
0.030
0.020
1.000
6.500
23.000
3.500
0.200
-
-
-
-
-
-
-
6.00
24.00
3.000
0.240
-
-
-
-
-
-
-
6.00
24.00
3.000
0.200
0.500
0.500
0.03
1.200
0.035
0.020
0.800
8.000
26.000
5.000
0.320
0.500
-
0.05
1.000
0.030
0.010
1.000
8.000
26.000
4.000
0.300
1.000
1.000
MinMin Max Min Max Min MaxMax
ASTM A790UNSS31803
ASTM A815UNSS31803
ASTM A790UNSS32205
ASTM A815UNSS32205
ASTM A790UNSS32750
ASTM A815UNSS32750
ASTM A790UNSS32760
ASTM A815UNSS32760
Seamless Pipes & Fittings Chemical Composition %
Duplex & Super Duplex
FITTINGS
PIPES
Element
Carbon ( C )
Manganese (Mn)
Phosphorus (P)
Sulphur (S)
Silicon (Si)
Nickel (Ni)
Chromium (Cr)
Molybdenum (Mo)
Nitrogen (N)
Copper (Cu)
-
-
-
-
-
17.500
19.500
6.000
0.180
0.500
-
-
-
-
-
23.000
19.000
4.000
0.100
1.000
0.020
1.000
0.030
0.010
0.800
18.500
20.500
6.500
0.220
1.000
0.020
2.000
0.040
0.030
1.000
28.000
23.000
5.000
-
2.000
MinMin Max Max
ASTM A312UNSS31254
ASTM A403UNSS31254
ASTM A312UNSN08904
ASTM A403UNSN08904
Austenitic Stainless Steels
Seamless Pipes & Fittings Chemical Composition % Seamless Pipes & Fittings Chemical Composition %
Copper Nickel 90/10 Cu Ni
FITTINGS
PIPES
Element
Carbon ( C )
Manganese (Mn)
Phosphorus (P)
Sulphur (S)
Nickel (Ni)
Copper (Cu)
Lead (Pb)
Iron (Fe) †
Zinc (Zn)
Total Impurities * including those in lighter type
-
0.500
-
-
10.000
Rem
-
1.500
-
Min Max
0.050
1.000
0.020
0.020
11.000
-
0.010
2.000
0.200
0.300
ASTM B466, UNS C70600, EEMUA 144
EEMUA 146, MSS SP43, MSS SP97
† The minimum iron content has been selected to improve erosion resistance.* Impurities are elements other than copper (including silver) iron, nickel (including cobalt) and manganese.** Determind on finished tube outside of heat affected zone (HAZ)
Type of fitting Size range
1in/30mm to4in/108mm
6in/159mm to36in/914mm
½in/16mm to2in/57mm
½in/16mm to2in/57mm
½in/16mm to2in/57mm
Butt weldingfittings
Socket weldfittings
Capillary brazedfittings
Compressionfittings
75˚C 100˚C38˚C 50˚C 75˚C 100˚C38˚C 50˚C
16.0
Use 20 bar
Use 20 bar
15.716.0 16.0
18.6 17.320.0 19.7
18.6 17.320.0 19.7
18.6 17.320.0 19.7
18.6 17.320.0 19.7
* ** *
16 bar rating 20 bar rating
MAXIMUM ALLOWABLE WORKING PRESSURE - bar
* In accordance with manufacturer’s recommendations.
Pressure/temperature ratings - fittings
83
OD’s = mmWall thickness = mmWeight = kg/m (plain end mass)
For 5s, 10s, 40s, 80sFigures based on stainless steel
ASME Pipe Schedule - SI UNITS (Metric)
NominalPipe Size
Inches
OD
mm
ASME B36.19 ASME B36.10
5s 10s 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS40s 80s
1.2410.3 0.281.730.36
2.410.48
1.240.28
1.450.32
1.730.37
1.730.37
1.240.28
2.410.47
1.6513.7 0.512.240.64
3.020.80
1.650.49
1.850.54
2.240.63
2.240.63
3.020.80
3.020.80
1.6517.1 0.642.310.86
3.201.12
1.650.63
1.850.70
2.310.84
2.310.84
3.201.10
3.201.10
2.1121.3 1.011.650.82
2.771.30
3.731.65
2.111.00
2.411.12
2.771.27
2.771.27
3.731.62
3.731.62
4.781.95
7.472.55
2.1126.7 1.311.651.04
2.871.71
3.912.24
2.111.28
2.411.44
2.871.69
2.871.69
3.912.20
3.912.20
5.562.90
7.823.64
2.7742.2 2.761.651.68
3.563.46
4.854.56
2.772.69
2.972.87
3.563.39
3.563.39
4.854.47
4.854.47
6.355.61
9.707.77
2.7748.3 3.111.651.95
3.684.13
5.085.51
2.773.11
3.183.53
3.684.05
3.684.05
5.085.41
5.085.41
7.147.25
10.159.56
2.7760.3 4.011.652.24
3.915.54
5.547.63
2.773.93
3.184.48
3.915.44
3.915.44
5.547.48
5.547.48
8.7411.11
11.0713.44
3.0573.0 5.362.113.77
5.168.81
7.0111.64
3.055.26
4.788.04
5.168.63
5.168.63
7.0111.41
7.0111.41
9.5314.92
14.0220.39
3.0588.9 6.592.114.60
5.4911.52
7.6215.59
3.056.46
4.789.92
5.4911.29
5.4911.29
7.6215.27
7.6215.27
11.1321.35
15.2427.68
3.05101.6 7.552.115.29
5.7413.57
8.0819.01
3.057.41
4.7811.41
5.7413.57
5.7413.57
8.0818.63
8.0818.63
--
--
3.05114.3 8.522.115.96
6.0216.40
8.5622.77
3.058.37
4.7812.91
6.0216.07
6.0216.07
8.5622.32
8.5622.32
11.1328.32
13.4933.54
17.1241.03
3.40141.3 11.822.779.67
6.5522.20
9.5331.59
3.4011.56
6.5521.77
6.5521.77
9.5330.97
9.5330.97
12.7040.28
15.8849.11
19.0557.43
3.40168.3 14.132.7711.55
7.1128.83
10.9743.42
3.4013.83
7.1128.26
7.1128.26
10.9742.56
10.9742.56
14.2754.20
18.2667.56
21.9579.22
3.76219.1 20.372.77
15.098.18
43.3912.7065.95
3.7619.97
6.3533.31
7.0436.81
8.1842.55
8.1842.55
10.3153.08
12.7064.64
12.7064.64
15.0975.92
18.2690.44
20.62100.92
23.01111.27
22.23107.92
4.19273.1 28.343.4023.08
9.2761.52
12.7083.19
4.1927.78
6.3541.77
7.8051.03
9.2760.31
9.2760.31
12.7081.55
12.7081.55
15.0996.01
18.26114.75
21.44133.06
25.40155.15
28.58172.33
25.40155.15
4.57323.9 36.733.9631.89
9.5375.32
12.7099.43
4.5735.98
6.3549.73
8.3865.20
9.5373.88
10.3179.73
14.27108.96
12.7097.46
17.48132.08
21.44159.91
25.40186.97
28.58208.14
33.32238.76
25.40186.97
4.78355.6 42.143.9635.06
9.5381.33
12.70107.40
6.3554.69
7.9267.90
9.5381.33
9.5381.33
11.1394.55
15.09126.70
12.70107.39
19.05158.10
23.83194.96
27.79224.65
31.75253.56
35.71281.70
4.78406.4 48.264.19
42.419.5393.27
12.70123.31
6.3562.64
7.9277.83
9.5393.27
9.5393.27
12.70123.30
16.66160.12
12.70123.30
21.44203.53
26.19246.56
30.96286.64
36.53333.19
40.49365.35
4.78457.2 54.364.1947.77
9.53108.37
12.70140.62
6.3570.57
7.9287.71
11.13122.38
9.53105.16
14.27155.80
19.05205.74
12.70139.15
23.36254.57
29.36309.62
34.93363.56
39.67408.26
45.24459.37
5.54508.0 70.004.78
60.469.53
117.1512.70155.13
6.3578.55
9.53117.15
12.70155.12
9.53117.15
15.09183.42
20.62247.83
12.70155.12
26.19311.17
32.54381.53
38.10441.49
44.45508.11
50.01564.81
5.54558.8 77.064.78
66.57--
--
6.3586.54
9.53129.13
12.70171.09
9.53129.13
--
22.23294.25
12.70171.09
28.58373.83
34.93451.42
41.28527.02
47.63600.63
53.98672.26
6.35609.6 96.375.5484.16
9.53141.12
12.70187.07
6.3594.53
9.53141.12
14.27209.64
9.53141.12
17.48255.41
24.61355.26
12.70187.06
30.96442.08
38.89547.71
46.02640.03
52.37720.15
59.54808.22
660.4 7.92127.36
12.70202.72
--
9.53152.87
--
12.70202.72
711.2 7.92137.32
12.70218.69
15.88271.21
9.53164.85
--
12.70218.69
7.92762.0 150.366.35
120.727.92
147.2812.70
234.6715.88292.18
9.53176.84
--
12.70234.67
812.8 7.92157.24
12.70250.64
15.88312.15
9.53188.82
17.48342.91
12.70250.64
863.6 7.92167.20
12.70266.61
15.88332.12
9.53200.31
17.48364.90
12.70266.61
914.4 7.92176.96
12.70282.27
15.88351.70
9.53212.56
19.05420.42
12.70282.27
965.2 9.53224.54
12.70298.24
1016.0 9.53236.53
12.70314.22
1066.8 9.53248.52
12.70330.19
1117.8 9.53260.50
12.70346.16
1168.4 9.53272.25
12.70351.82
1219.2 9.53284.24
12.70377.79
2.7733.4 2.131.650.33
3.382.55
4.553.29
2.772.09
2.902.18
3.382.50
3.382.50
4.553.24
4.553.24
6.354.24
9.095.45
6
8
10
15
20
32
40
50
65
80
90
100
125
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
25
1/8
1/4
3/8
1/2
3/4
1 1/4
1 1/2
2
2 1/2
3 1/2
3
4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
1
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
NominalPipe Size
Inches
OD
inches
ASME B36.19 ASME B36.10
5s
1/8 0.0490.405 0.190.0680.24
0.0950.32
0.0490.19
0.0570.21
0.0680.24
0.0950.31
0.0950.31
0.0680.24
0.0650.540 0.340.0880.43
0.1190.55
0.0650.33
0.0730.36
0.0880.42
0.1190.54
0.1190.54
0.0880.42
0.0650.675 0.430.0910.58
0.1260.75
0.0650.42
0.0730.47
0.0910.57
0.1260.74
0.1260.74
0.0910.57
0.0830.840 0.680.0650.55
0.1090.87
0.1471.11
0.0830.67
0.0950.76
0.1090.85
0.1471.09
0.1881.31
0.2941.71
0.1471.09
0.1090.85
0.0831.050 0.880.0650.70
0.1131.15
0.1541.50
0.0830.86
0.0950.97
0.1131.13
0.1541.47
0.2191.94
0.3082.44
0.1541.47
0.1131.13
0.1091.315 1.430.0650.89
0.1331.71
0.1792.21
0.1091.41
0.1141.46
0.1331.68
0.1792.17
0.2502.84
0.3583.66
0.1792.17
0.1331.68
0.1091.660 1.850.0651.13
0.1402.32
0.1913.06
0.1091.81
0.1171.93
0.1402.27
0.1913.00
0.2503.76
0.3825.21
0.1913.00
0.1402.27
0.1091.900 2.130.0651.31
0.1452.77
0.2003.70
0.1092.09
0.1252.37
0.1452.72
0.2003.63
0.2814.86
0.4006.41
0.2003.63
0.1452.72
0.1092.375 2.690.0651.64
0.1543.72
0.2185.12
0.1092.64
0.1253.01
0.1543.65
0.2185.02
0.3447.46
0.4369.03
0.2185.02
0.1543.65
0.1202.875 3.600.0832.53
0.2035.91
0.2767.81
0.123.53
0.1885.40
0.2035.79
0.2767.66
0.37510.01
0.55213.69
0.2767.66
0.2035.79
0.1203.500 4.420.0833.09
0.2167.73
0.30010.46
0.124.34
0.1886.66
0.2167.58
0.30010.25
0.43814.32
0.60018.58
0.30010.25
0.2167.58
0.1204.000 5.070.0833.55
0.2269.29
0.31812.76
0.124.98
0.1887.66
0.2269.11
0.31812.50
--
--
0.31812.50
0.2269.11
0.1204.500 5.720.0834.00
0.23711.01
0.33715.28
0.125.62
0.1888.67
0.23710.79
0.33714.98
0.43819.00
0.53122.51
0.67427.54
0.33714.98
0.23710.79
0.1345.563 7.930.1096.49
0.25814.91
0.37521.20
0.1347.78
0.25814.63
0.37520.78
0.50027.04
0.62532.96
0.75038.55
0.37520.78
0.25814.63
0.1346.625 9.480.1097.75
0.28019.35
0.43229.14
0.1349.30
0.28018.97
0.43228.57
0.56236.39
0.71945.35
0.86453.16
0.43228.57
0.28018.97
0.1488.625 13.670.10910.13
0.32229.12
0.50044.26
0.14813.41
0.25022.36
0.27724.70
0.32228.55
0.40635.64
0.50043.39
0.50043.39
0.59450.95
0.71960.71
0.81267.76
0.90674.69
0.87572.42
0.32228.55
0.16510.750 19.020.13415.49
0.36541.29
0.50055.83
0.16518.67
0.25028.04
0.30734.24
0.36540.48
0.36540.48
0.50054.74
0.50054.74
0.59464.43
0.71977.03
0.84489.29
1.000104.13
1.125115.64
1.000104.13
0.18012.750 24.650.15623.53
0.37550.55
0.50066.73
0.1824.19
0.25033.38
0.33043.77
0.37549.56
0.40653.52
0.56273.15
0.50065.42
0.68888.63
0.844107.32
1.000125.49
1.125139.67
1.312160.27
1.000125.49
0.18814.000 28.280.16528.46
0.37554.62
0.50072.16
0.25036.71
0.31245.61
0.37554.57
0.37554.57
0.43863.44
0.59485.05
0.50072.09
0.750106.13
0.938130.85
1.094150.79
1.250170.21
1.406189.11
0.18816.000 32.390.16528.46
0.37562.64
0.50082.85
0.25042.05
0.31252.27
0.37562.58
0.37562.58
0.50082.77
0.656107.50
0.50082.77
0.844136.61
1.031164.82
1.219192.43
1.438223.64
1.594245.25
0.18818.000 36.480.16532.06
0.37570.65
0.50094.38
0.25047.39
0.31258.94
0.43882.15
0.37570.59
0.562104.67
0.750138.17
0.50093.45
0.938170.92
1.156207.96
1.375244.14
1.562274.22
1.781308.50
0.21820.000 46.980.18840.58
0.37578.67
0.500104.23
0.25052.73
0.37578.60
0.500104.13
0.37578.60
0.594123.11
0.812166.40
0.500104.13
1.031208.87
1.281256.10
1.500296.37
1.750341.09
1.969379.17
0.21822.000 51.720.18844.68
--
--
0.25058.07
0.37586.61
0.500114.81
0.37586.61
--
0.872197.41
0.500114.81
1.125250.81
1.375302.88
1.625353.61
1.875403.00
2.125451.06
0.25024.000 64.680.21856.48
0.37594.71
0.500125.61
0.25063.41
0.37594.62
0.562140.68
0.37594.62
0.688171.29
0.969238.35
0.500125.49
1.219296.58
1.531367.39
1.812429.39
2.062483.12
2.344542.13
26.000 0.31285.60
0.500136.17
--
0.375102.63
--
0.500136.17
28.000 0.31292.26
0.500146.85
0.625182.73
0.375110.64
--
0.500146.85
0.31230.000 100.910.25081.02
0.31298.93
0.500157.53
0.625196.08
0.375118.65
--
0.500157.53
32.000 0.312105.59
0.500168.21
0.625209.43
0.375126.66
0.688230.08
0.500168.21
34.000 0.312112.25
0.500178.89
0.625222.78
0.375134.67
0.688244.77
0.500178.89
36.000 0.312118.92
0.500189.57
0.625236.13
0.375142.68
0.750282.35
0.500189.57
38.000 0.375150.69
0.500200.25
40.000 0.375158.70
0.500210.93
42.000 0.375166.71
0.500221.61
44.000 0.375174.72
0.500232.29
46.000 0.375182.73
0.500242.97
48.000 0.375190.74
0.500253.65
10s 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS40s 80s
61/4
83/8
101/2
153/4
201
251 1/4
321 1/2
402
502 1/2
653
803 1/2
904
1005
1256
1508
20010
25012
30014
35016
40018
45020
50022
55024
60026
65028
70030
75032
80034
85036
90038
95040
100042
105044
110046
115048
1200
OD’s = inchesWall thickness = inchesWeight = lbs./ft. (plain end mass)
For 5s, 10s, 40s, 80sFigures based on austenitic steel
ASME Pipe Schedule - INCH UNITS
84
OD’s = mmWall thickness = mmWeight = kg/m (plain end mass)
For 5s, 10s, 40s, 80sFigures based on stainless steel
ASME Pipe Schedule - SI UNITS (Metric)
NominalPipe Size
Inches
OD
mm
ASME B36.19 ASME B36.10
5s 10s 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS40s 80s
1.2410.3 0.281.730.36
2.410.48
1.240.28
1.450.32
1.730.37
1.730.37
1.240.28
2.410.47
1.6513.7 0.512.240.64
3.020.80
1.650.49
1.850.54
2.240.63
2.240.63
3.020.80
3.020.80
1.6517.1 0.642.310.86
3.201.12
1.650.63
1.850.70
2.310.84
2.310.84
3.201.10
3.201.10
2.1121.3 1.011.650.82
2.771.30
3.731.65
2.111.00
2.411.12
2.771.27
2.771.27
3.731.62
3.731.62
4.781.95
7.472.55
2.1126.7 1.311.651.04
2.871.71
3.912.24
2.111.28
2.411.44
2.871.69
2.871.69
3.912.20
3.912.20
5.562.90
7.823.64
2.7742.2 2.761.651.68
3.563.46
4.854.56
2.772.69
2.972.87
3.563.39
3.563.39
4.854.47
4.854.47
6.355.61
9.707.77
2.7748.3 3.111.651.95
3.684.13
5.085.51
2.773.11
3.183.53
3.684.05
3.684.05
5.085.41
5.085.41
7.147.25
10.159.56
2.7760.3 4.011.652.24
3.915.54
5.547.63
2.773.93
3.184.48
3.915.44
3.915.44
5.547.48
5.547.48
8.7411.11
11.0713.44
3.0573.0 5.362.113.77
5.168.81
7.0111.64
3.055.26
4.788.04
5.168.63
5.168.63
7.0111.41
7.0111.41
9.5314.92
14.0220.39
3.0588.9 6.592.114.60
5.4911.52
7.6215.59
3.056.46
4.789.92
5.4911.29
5.4911.29
7.6215.27
7.6215.27
11.1321.35
15.2427.68
3.05101.6 7.552.115.29
5.7413.57
8.0819.01
3.057.41
4.7811.41
5.7413.57
5.7413.57
8.0818.63
8.0818.63
--
--
3.05114.3 8.522.115.96
6.0216.40
8.5622.77
3.058.37
4.7812.91
6.0216.07
6.0216.07
8.5622.32
8.5622.32
11.1328.32
13.4933.54
17.1241.03
3.40141.3 11.822.779.67
6.5522.20
9.5331.59
3.4011.56
6.5521.77
6.5521.77
9.5330.97
9.5330.97
12.7040.28
15.8849.11
19.0557.43
3.40168.3 14.132.7711.55
7.1128.83
10.9743.42
3.4013.83
7.1128.26
7.1128.26
10.9742.56
10.9742.56
14.2754.20
18.2667.56
21.9579.22
3.76219.1 20.372.77
15.098.18
43.3912.7065.95
3.7619.97
6.3533.31
7.0436.81
8.1842.55
8.1842.55
10.3153.08
12.7064.64
12.7064.64
15.0975.92
18.2690.44
20.62100.92
23.01111.27
22.23107.92
4.19273.1 28.343.4023.08
9.2761.52
12.7083.19
4.1927.78
6.3541.77
7.8051.03
9.2760.31
9.2760.31
12.7081.55
12.7081.55
15.0996.01
18.26114.75
21.44133.06
25.40155.15
28.58172.33
25.40155.15
4.57323.9 36.733.9631.89
9.5375.32
12.7099.43
4.5735.98
6.3549.73
8.3865.20
9.5373.88
10.3179.73
14.27108.96
12.7097.46
17.48132.08
21.44159.91
25.40186.97
28.58208.14
33.32238.76
25.40186.97
4.78355.6 42.143.9635.06
9.5381.33
12.70107.40
6.3554.69
7.9267.90
9.5381.33
9.5381.33
11.1394.55
15.09126.70
12.70107.39
19.05158.10
23.83194.96
27.79224.65
31.75253.56
35.71281.70
4.78406.4 48.264.19
42.419.5393.27
12.70123.31
6.3562.64
7.9277.83
9.5393.27
9.5393.27
12.70123.30
16.66160.12
12.70123.30
21.44203.53
26.19246.56
30.96286.64
36.53333.19
40.49365.35
4.78457.2 54.364.1947.77
9.53108.37
12.70140.62
6.3570.57
7.9287.71
11.13122.38
9.53105.16
14.27155.80
19.05205.74
12.70139.15
23.36254.57
29.36309.62
34.93363.56
39.67408.26
45.24459.37
5.54508.0 70.004.78
60.469.53
117.1512.70155.13
6.3578.55
9.53117.15
12.70155.12
9.53117.15
15.09183.42
20.62247.83
12.70155.12
26.19311.17
32.54381.53
38.10441.49
44.45508.11
50.01564.81
5.54558.8 77.064.78
66.57--
--
6.3586.54
9.53129.13
12.70171.09
9.53129.13
--
22.23294.25
12.70171.09
28.58373.83
34.93451.42
41.28527.02
47.63600.63
53.98672.26
6.35609.6 96.375.5484.16
9.53141.12
12.70187.07
6.3594.53
9.53141.12
14.27209.64
9.53141.12
17.48255.41
24.61355.26
12.70187.06
30.96442.08
38.89547.71
46.02640.03
52.37720.15
59.54808.22
660.4 7.92127.36
12.70202.72
--
9.53152.87
--
12.70202.72
711.2 7.92137.32
12.70218.69
15.88271.21
9.53164.85
--
12.70218.69
7.92762.0 150.366.35
120.727.92
147.2812.70
234.6715.88292.18
9.53176.84
--
12.70234.67
812.8 7.92157.24
12.70250.64
15.88312.15
9.53188.82
17.48342.91
12.70250.64
863.6 7.92167.20
12.70266.61
15.88332.12
9.53200.31
17.48364.90
12.70266.61
914.4 7.92176.96
12.70282.27
15.88351.70
9.53212.56
19.05420.42
12.70282.27
965.2 9.53224.54
12.70298.24
1016.0 9.53236.53
12.70314.22
1066.8 9.53248.52
12.70330.19
1117.8 9.53260.50
12.70346.16
1168.4 9.53272.25
12.70351.82
1219.2 9.53284.24
12.70377.79
2.7733.4 2.131.650.33
3.382.55
4.553.29
2.772.09
2.902.18
3.382.50
3.382.50
4.553.24
4.553.24
6.354.24
9.095.45
6
8
10
15
20
32
40
50
65
80
90
100
125
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
25
1/8
1/4
3/8
1/2
3/4
1 1/4
1 1/2
2
2 1/2
3 1/2
3
4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
1
Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel Manufacturer of Nickel Alloys, Austenitic Stainless Steel and Copper Nickel
NominalPipe Size
Inches
OD
inches
ASME B36.19 ASME B36.10
5s
1/8 0.0490.405 0.190.0680.24
0.0950.32
0.0490.19
0.0570.21
0.0680.24
0.0950.31
0.0950.31
0.0680.24
0.0650.540 0.340.0880.43
0.1190.55
0.0650.33
0.0730.36
0.0880.42
0.1190.54
0.1190.54
0.0880.42
0.0650.675 0.430.0910.58
0.1260.75
0.0650.42
0.0730.47
0.0910.57
0.1260.74
0.1260.74
0.0910.57
0.0830.840 0.680.0650.55
0.1090.87
0.1471.11
0.0830.67
0.0950.76
0.1090.85
0.1471.09
0.1881.31
0.2941.71
0.1471.09
0.1090.85
0.0831.050 0.880.0650.70
0.1131.15
0.1541.50
0.0830.86
0.0950.97
0.1131.13
0.1541.47
0.2191.94
0.3082.44
0.1541.47
0.1131.13
0.1091.315 1.430.0650.89
0.1331.71
0.1792.21
0.1091.41
0.1141.46
0.1331.68
0.1792.17
0.2502.84
0.3583.66
0.1792.17
0.1331.68
0.1091.660 1.850.0651.13
0.1402.32
0.1913.06
0.1091.81
0.1171.93
0.1402.27
0.1913.00
0.2503.76
0.3825.21
0.1913.00
0.1402.27
0.1091.900 2.130.0651.31
0.1452.77
0.2003.70
0.1092.09
0.1252.37
0.1452.72
0.2003.63
0.2814.86
0.4006.41
0.2003.63
0.1452.72
0.1092.375 2.690.0651.64
0.1543.72
0.2185.12
0.1092.64
0.1253.01
0.1543.65
0.2185.02
0.3447.46
0.4369.03
0.2185.02
0.1543.65
0.1202.875 3.600.0832.53
0.2035.91
0.2767.81
0.123.53
0.1885.40
0.2035.79
0.2767.66
0.37510.01
0.55213.69
0.2767.66
0.2035.79
0.1203.500 4.420.0833.09
0.2167.73
0.30010.46
0.124.34
0.1886.66
0.2167.58
0.30010.25
0.43814.32
0.60018.58
0.30010.25
0.2167.58
0.1204.000 5.070.0833.55
0.2269.29
0.31812.76
0.124.98
0.1887.66
0.2269.11
0.31812.50
--
--
0.31812.50
0.2269.11
0.1204.500 5.720.0834.00
0.23711.01
0.33715.28
0.125.62
0.1888.67
0.23710.79
0.33714.98
0.43819.00
0.53122.51
0.67427.54
0.33714.98
0.23710.79
0.1345.563 7.930.1096.49
0.25814.91
0.37521.20
0.1347.78
0.25814.63
0.37520.78
0.50027.04
0.62532.96
0.75038.55
0.37520.78
0.25814.63
0.1346.625 9.480.1097.75
0.28019.35
0.43229.14
0.1349.30
0.28018.97
0.43228.57
0.56236.39
0.71945.35
0.86453.16
0.43228.57
0.28018.97
0.1488.625 13.670.10910.13
0.32229.12
0.50044.26
0.14813.41
0.25022.36
0.27724.70
0.32228.55
0.40635.64
0.50043.39
0.50043.39
0.59450.95
0.71960.71
0.81267.76
0.90674.69
0.87572.42
0.32228.55
0.16510.750 19.020.13415.49
0.36541.29
0.50055.83
0.16518.67
0.25028.04
0.30734.24
0.36540.48
0.36540.48
0.50054.74
0.50054.74
0.59464.43
0.71977.03
0.84489.29
1.000104.13
1.125115.64
1.000104.13
0.18012.750 24.650.15623.53
0.37550.55
0.50066.73
0.1824.19
0.25033.38
0.33043.77
0.37549.56
0.40653.52
0.56273.15
0.50065.42
0.68888.63
0.844107.32
1.000125.49
1.125139.67
1.312160.27
1.000125.49
0.18814.000 28.280.16528.46
0.37554.62
0.50072.16
0.25036.71
0.31245.61
0.37554.57
0.37554.57
0.43863.44
0.59485.05
0.50072.09
0.750106.13
0.938130.85
1.094150.79
1.250170.21
1.406189.11
0.18816.000 32.390.16528.46
0.37562.64
0.50082.85
0.25042.05
0.31252.27
0.37562.58
0.37562.58
0.50082.77
0.656107.50
0.50082.77
0.844136.61
1.031164.82
1.219192.43
1.438223.64
1.594245.25
0.18818.000 36.480.16532.06
0.37570.65
0.50094.38
0.25047.39
0.31258.94
0.43882.15
0.37570.59
0.562104.67
0.750138.17
0.50093.45
0.938170.92
1.156207.96
1.375244.14
1.562274.22
1.781308.50
0.21820.000 46.980.18840.58
0.37578.67
0.500104.23
0.25052.73
0.37578.60
0.500104.13
0.37578.60
0.594123.11
0.812166.40
0.500104.13
1.031208.87
1.281256.10
1.500296.37
1.750341.09
1.969379.17
0.21822.000 51.720.18844.68
--
--
0.25058.07
0.37586.61
0.500114.81
0.37586.61
--
0.872197.41
0.500114.81
1.125250.81
1.375302.88
1.625353.61
1.875403.00
2.125451.06
0.25024.000 64.680.21856.48
0.37594.71
0.500125.61
0.25063.41
0.37594.62
0.562140.68
0.37594.62
0.688171.29
0.969238.35
0.500125.49
1.219296.58
1.531367.39
1.812429.39
2.062483.12
2.344542.13
26.000 0.31285.60
0.500136.17
--
0.375102.63
--
0.500136.17
28.000 0.31292.26
0.500146.85
0.625182.73
0.375110.64
--
0.500146.85
0.31230.000 100.910.25081.02
0.31298.93
0.500157.53
0.625196.08
0.375118.65
--
0.500157.53
32.000 0.312105.59
0.500168.21
0.625209.43
0.375126.66
0.688230.08
0.500168.21
34.000 0.312112.25
0.500178.89
0.625222.78
0.375134.67
0.688244.77
0.500178.89
36.000 0.312118.92
0.500189.57
0.625236.13
0.375142.68
0.750282.35
0.500189.57
38.000 0.375150.69
0.500200.25
40.000 0.375158.70
0.500210.93
42.000 0.375166.71
0.500221.61
44.000 0.375174.72
0.500232.29
46.000 0.375182.73
0.500242.97
48.000 0.375190.74
0.500253.65
10s 10 20 30 STD 40 60 XS 80 100 120 140 160 XXS40s 80s
61/4
83/8
101/2
153/4
201
251 1/4
321 1/2
402
502 1/2
653
803 1/2
904
1005
1256
1508
20010
25012
30014
35016
40018
45020
50022
55024
60026
65028
70030
75032
80034
85036
90038
95040
100042
105044
110046
115048
1200
OD’s = inchesWall thickness = inchesWeight = lbs./ft. (plain end mass)
For 5s, 10s, 40s, 80sFigures based on austenitic steel
ASME Pipe Schedule - INCH UNITS
85
88
®
Nautic Steels Ltd.(A member of Pantech Group Holdings Berhad, Listed on Main Board of Bursa Malaysia)
Nautic House, ClaymoreTame Valley Industrial Estate
TamworthStaffordshire
B77 5DQUnited Kingdom
Tel: +44 (0)1827 281111Fax: +44 (0)1827 281444
Email: [email protected]
www.nautic.co.uk
®
Manufacturer of Nickel Alloys, Austenitic Stainless Steel andCopper Nickel