table of contents - web view07-12-2017 · ... division 2, chapter 4, article 4,...

REQUEST FOR PROPOSALS

Research Roadmap for Cost and Technology Breakthroughs for Renewable Energy

Generation

RFP-17-303www.energy.ca.gov/contracts/

State of CaliforniaCalifornia Energy Commission

October 2017

Table of ContentsI. INTRODUCTION......................................................................................................4

PURPOSE OF RFP..........................................................................................................4KEY WORDS/TERMS.......................................................................................................4KEY ACTIVITIES AND DATES............................................................................................5BIDDERS’ ADMONISHMENT..............................................................................................5BACKGROUND................................................................................................................6AVAILABLE FUNDING AND HOW AWARD IS DETERMINED.................................................10APPLICANT REQUIREMENTS..........................................................................................11PRE-BID CONFERENCE.................................................................................................13QUESTIONS..................................................................................................................14CONTACT INFORMATION................................................................................................14RESPONSES TO THIS RFP............................................................................................14REFERENCE DOCUMENTS.............................................................................................14

II. SCOPE OF WORK AND DELIVERABLES............................................................17BACKGROUND/PROBLEM STATEMENT............................................................................17RATEPAYER BENEFITS, TECHNOLOGICAL ADVANCEMENTS, AND BREAKTHROUGHS..........18GOALS AND OBJECTIVES...............................................................................................18SCOPE OF WORK.........................................................................................................19

III. PROPOSAL FORMAT, REQUIRED DOCUMENTS, AND DELIVERY..................32ABOUT THIS SECTION...................................................................................................32REQUIRED FORMAT FOR A PROPOSAL...........................................................................32NUMBER OF COPIES.....................................................................................................32PREFERRED METHOD FOR DELIVERY.............................................................................33ORGANIZE YOUR PROPOSAL AS FOLLOWS.....................................................................33

IV. EVALUATION PROCESS AND CRITERIA...........................................................39ABOUT THIS SECTION...................................................................................................39PROPOSAL EVALUATION................................................................................................39SCORING SCALE...........................................................................................................40NOTICE OF PROPOSED AWARD.....................................................................................40

V. BUSINESS PARTICIPATION PROGRAMS AND MATCH FUNDING (PREFERENCES/INCENTIVES)...................................................................................45

PREFERENCE POINTS...................................................................................................45DISABLED VETERAN BUSINESS ENTERPRISES (DVBE) COMPLIANCE REQUIREMENTS......45DVBE INCENTIVE.........................................................................................................47SMALL BUSINESS / MICROBUSINESS / NON-SMALL BUSINESS.........................................48NON-SMALL BUSINESS..................................................................................................50TARGET AREA CONTRACT PREFERENCE ACT (TACPA).................................................50MATCH FUNDING..........................................................................................................51

VI. ADMINISTRATION.................................................................................................52RFP DEFINED..............................................................................................................52

September 2017 of 55 RFP-17-303Research Roadmap for Cost and

Technology Breakthroughs for Renewable Energy Generation

DEFINITION OF KEY WORDS..........................................................................................52COST OF DEVELOPING PROPOSAL.................................................................................52SOFTWARE APPLICATION DEVELOPMENT.......................................................................52PRINTING SERVICES.....................................................................................................52CONFIDENTIAL INFORMATION.........................................................................................53DARFUR CONTRACTING ACT OF 2008...........................................................................53CALIFORNIA CIVIL RIGHTS LAWS...................................................................................53RFP CANCELLATION AND AMENDMENTS........................................................................53ERRORS.......................................................................................................................54MODIFYING OR WITHDRAWAL OF PROPOSAL..................................................................54IMMATERIAL DEFECT....................................................................................................54DISPOSITION OF BIDDER’S DOCUMENTS........................................................................54GROUNDS TO REJECT A PROPOSAL..............................................................................54PROTEST PROCEDURES................................................................................................55CONTRACT REQUIREMENTS..........................................................................................55

Attachments

1 Contractor Status Form2 Darfur Contracting Act3 DVBE Std. 8434 Bidder Declaration form GSPD-05-1055 Contractor Certification Clauses6 Client References7 Budget Forms8 Standard Agreement Example9 Commitment and Support Letters Form10 California Civil Rights Laws Certification



I. Introduction

PURPOSE OF RFPThe purpose of this Request for Proposal (RFP) is to select contractors to work with Energy Commission staff to develop a research roadmap that will identify, describe and prioritize research, development, demonstration and deployment (RDD&D) on technology opportunities that have potential to achieve high-penetration of renewable energy into California’s electricity grid. Renewable energy, for the purposes of this RFP, includes transmission line connected renewable energy generation technologies and strategies, including energy storage.

See Part II of this solicitation for information on project scope of work and deliverables. Proposals will be evaluated in a two stage process. Stage one will involve a screening to see whether submitted proposals meet the administrative requirements, including providing all required documentation, set forth in this RFP. Those proposals that meet these administrative requirements will enter the second stage of review; those that do not, will be eliminated. During the Stage Two review phase, proposals will be reviewed and scored by a committee based on the technical merit and cost effectiveness of the proposal. Funding will be awarded based on highest score.

KEY WORDS/TERMS

Word/Term DefinitionBidder Respondent to this RFPCAM Commission Agreement Manager, the person designated by the

Energy Commission to oversee the performance of a contract resulting from this solicitation and to serve as the main point of contact for the Recipient

CAO Commission Agreement OfficerContractor Bidder who receives an contract from the Energy Commission as a

result of this RFP and will perform the tasks specified in this Scope of Work under the direction of the Energy Commission’s Agreement Manager

CPUC California Public Utilities CommissionDER Distributed Energy ResourcesDGS Department of General ServicesDVBE Disabled Veteran Business EnterpriseEPIC Electric Program Investment Charge, the source of funding for the

projects awarded under this solicitationGHG Greenhouse gasEnergy Commission California Energy CommissionIOU Investor-Owned Utility, including Pacific Gas and Electric Co., San

Diego Gas and Electric Co., and Southern California Edison Co.NOPA Notice of Proposed Award, a public notice that identifies proposed

award recipientsOSDS Office of Small Business and DVBE ServicesProject Manager The person designated by the bidder to oversee the project and to

serve as the main point of contact for the Energy CommissionProject Partner An entity or individual that contributes financially or otherwise to the

project (e.g., match funding, provision of a demonstration site), and



Word/Term Definitiondoes not receive Energy Commission funds

Research Roadmap Research Roadmap for Cost and Technology Breakthroughs for Renewable Energy

Recipient The recipient of an award under this solicitationRDD&D Research, Development, Demonstration and DeploymentRFP Request for ProposalProposal Formal written response to this document from BidderState State of California

KEY ACTIVITIES AND DATESKey activities including dates and times for this RFP are presented below. An addendum will be released if the dates change for the asterisked (*) activities.

ACTIVITY ACTION DATERFP Release October 16, 2017Pre-Bid Conference* October 20, 2017Deadline for Written Questions by 5:00 p.m.* October 27, 2017Distribute Questions/Answers and Addenda (if any) to RFP November 10, 2017Deadline to Submit Proposals by 5:00 p.m.* January 8, 2018

Clarification Interviews (If necessary) February 8, 2018

Notice of Proposed Award February 26, 2018

Commission Business Meeting April 11, 2018

Contract Start Date May 14, 2018

Contract Termination Date November 18, 2019

BIDDERS’ ADMONISHMENTThis RFP contains proposal requirements and instructions for a firm quotation to be submitted by interested Bidders, the format in which the technical information is to be submitted, the material to be included, the requirements which must be met to be eligible for consideration, and Bidder responsibilities. Bidders are responsible for carefully reading the entire RFP, asking appropriate questions in a timely manner, ensuring that all RFP requirements are met, submitting all required responses in a complete manner by the required date and time, and carefully rereading the RFP before submitting a proposal. In particular, please carefully read the Screening/Scoring Criteria and Grounds for Rejection in Part IV, and the terms and conditions located at:http://www.energy.ca.gov/research/contractors.html.

All submitted documents will become public records upon the posting of the Notice of Proposed Award.



http://www.energy.ca.gov/research/contractors.html

BACKGROUND1. Electric Program Investment Charge (EPIC) Program This RFP will award one contract funded by the EPIC, an electricity ratepayer surcharge established by the California Public Utilities Commission (CPUC) in December 2011.1 The purpose of the EPIC program is to benefit the ratepayers of three investor-owned utilities (IOUs), which include Pacific Gas and Electric Co., San Diego Gas and Electric Co., and Southern California Edison Co and is administered by the California Energy Commission and the three IOUs. The EPIC funds clean energy technology research projects that promote greater electricity reliability, lower costs, and increased safety.2 In addition to providing IOU ratepayer benefits, funded projects must lead to breakthroughs to overcome the barriers that prevent the achievement of the state’s statutory energy goals.3

2. Program Areas, Strategic Objectives, and Funding Initiatives EPIC projects must fall within the following program areas identified by the CPUC:

Applied Research and Development; Technology Demonstration and Deployment; and Market Facilitation

The proposed roadmap addressed by this RFP will address research at the applied and demonstration and deployment program areas.

In addition, projects must fall within one of 18 general focus areas (“strategic objectives”) identified in the Energy Commission’s EPIC Investment Plan and within one or more specific focus areas (“funding initiatives”) identified in the plan. Below are all program areas, strategic objectives, and funding initiatives targeted by this solicitation:

Program Area: Market Facilitation Strategic Objective 21: Inform Investments and Decision-Making Through

Market and Technical Analysis Funding Initiative S21.1: Conduct Analyses on Different Technology

Options and Strategies for the Electricity SystemThe purpose of this funding initiative is to: Identify critical current and future research funding gaps to achieve

IOU ratepayer benefits encompassed in state policy goals. Prioritize potential research activities based upon near-term, mid-

term, and long-term needs; potential to benefit ratepayers; investment risk; and other criteria to maximize IOU ratepayer benefits for each dollar invested.

1 See CPUC “Phase 1” Decision 11-12-035, December 15, 2011, http://docs.cpuc.ca.gov/PublishedDocs/WORD_PDF/FINAL_DECISION/156050.PDF.2 See CPUC “Phase 2” Decision 12-05-037, May 24, 2012, http://docs.cpuc.ca.gov/PublishedDocs/WORD_PDF/FINAL_DECISION/167664.PDF.3 California Public Resources Code, Section 25711.5(a), http://www.leginfo.ca.gov/cgi-bin/displaycode?section=prc&group=25001-26000&file=25710-25712.



http://www.leginfo.ca.gov/cgi-bin/displaycode?section=prc&group=25001-26000&file=25710-25712

http://www.leginfo.ca.gov/cgi-bin/displaycode?section=prc&group=25001-26000&file=25710-25712

http://docs.cpuc.ca.gov/PublishedDocs/WORD_PDF/FINAL_DECISION/167664.PDF


3. Applicable Laws, Policies, and Background Documents This RFP addresses the energy goals described in the following laws, policies, and background documents. Please see discussion above for links to laws, policies, and background documents specific to EPIC.

Laws/Regulations

Assembly Bill (AB) 32 (“The Global Warming Solutions Act of 2006”) AB 32 created a comprehensive program to reduce greenhouse gas (GHG) emissions in California. GHG reduction strategies include a reduction mandate of 1990 levels by 2020 and a cap-and-trade program. AB 32 also required the California Air Resources Board (ARB) to develop a Scoping Plan that describes the approach California will take to reduce GHGs. ARB must update the plan every five years.

Additional information: https://www.arb.ca.gov/cc/ab32/ab32.htm.Applicable Law: California Health and Safety Code §§ 38500 et. seq.

AB 758, Building Efficiency (Statutes of 2009)

AB 758 requires the Energy Commission to collaborate with the CPUC and stakeholders to develop a comprehensive program to achieve greater energy savings in existing residential and nonresidential buildings. The Energy Commission developed a Comprehensive Energy Efficiency Program for Existing Buildings Scoping Report in 2012, and plans to develop voluntary and mandatory strategies and approaches to achieve energy savings.

Additional information: http://www.energy.ca.gov/ab758/Applicable Law: California Public Resources § 25943, California Public Utilities Code §§ 381.2 and 385.2

AB 327, Distribution Resource Planning (Statues of 2013)

AB 327 requires submittal of a distribution resource plan proposal to the California Public Utilities Commission, identifying optimal locations for the deployment of distributed resources and planning for integrating distributed resources into the electrical grid.

Additional information: http://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=201320140AB327.

Appliance Efficiency RegulationsThe Energy Commission promulgates appliance efficiency regulations that require manufacturers of various new appliances sold or offered for sale in California to test them using specified test methods. Covered appliances include refrigerators, air conditioners, heaters, plumbing fittings/fixtures, lighting, washers, dryers, cooking products, electric motors, transformers, power supplies, televisions, and battery charger systems.

Additional information: http://www.bsc.ca.gov/; http://www.energy.ca.gov/appliances/Applicable Law: California Code of Regulations, Title 20, Division 2, Chapter 4, Article 4, §§ 1601 et. seq.

California Energy CodeThe Energy Code is a component of the California Building Standards Code, and is published every three years through the collaborative efforts of state agencies including the California



http://www.energy.ca.gov/appliances/

http://www.bsc.ca.gov/

http://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=201320140AB327

http://leginfo.legislature.ca.gov/faces/billNavClient.xhtml?bill_id=201320140AB327

http://www.energy.ca.gov/ab758/

https://www.arb.ca.gov/cc/ab32/ab32.htm

Building Standards Commission and the Energy Commission. The Code ensures that new and existing buildings achieve energy efficiency and preserve outdoor and indoor environmental quality through use of the most energy efficient technologies and construction.

Additional information: http://www.energy.ca.gov/title24/ Applicable Law: California Code of Regulations, Title 24, Part 6, and associated administrative regulations in Part 1.

Renewables Portfolio Standard (Senate Bill (SB) X1-2, Statutes of 2011-12, First Extraordinary Session)

SB X1-2 requires that all California electricity retailers adopt the goals of 20 percent of retail sales from renewable energy sources by the end of 2013, 25 percent by the end of 2016, and 33 percent by the end of 2020.

Applicable Law: California Code of Regulations, Title 24, Part 6 and associated administrative regulations in Part 1

Senate Bill 350 (Statutes of 2015)SB 350 requires the Energy Commission to establish annual targets for statewide energy efficiency savings and demand reduction that will achieve a cumulative doubling of statewide energy efficiency savings in electricity and natural gas final end uses of retail customers by January 1, 2030. The law also requires the CPUC to establish efficiency targets for electrical and gas corporations consistent with this goal and requires local publicly owned electric utilities to establish annual targets for energy efficiency savings and demand reduction consistent with this goal.

SB 350 also increases the amount of electricity generated and sold to retail customers per year from eligible renewable energy resources be increased to 50% by December 31, 2030, as provided. The bill would make other revisions to the RPS Program and to certain other requirements on public utilities and publicly owned electric utilities.

Applicable Law: California Code of Regulations, Health and Safety Code Section 44258.5; Labor Code Section 25310 and 25943; Public Resources Code Sections 25302.2 and 25327; and Public Utilities Code 359, 399.4 et. seq., and 454.55 et.seq.

Assembly Bill (AB) 2514 - Energy Storage Systems (Statutes of 2010) AB 2514 required the CPUC to determine targets for the procurement of viable, cost-effective energy storage systems by load-serving entities. The CPUC adopted the procurement targets in Decision 13-10-040, issued on October 17, 2013 (see the summary of Decision 13-10-040 in the “Policies/Plans” section below).

Additional information: http://www.cpuc.ca.gov/general.aspx?id=3462.Applicable Law: California Public Utilities Code §§ 2835 et. seq., and § 9620.

Public Utilities Code Section 8360This sets out the state’s policy to support the development of a smart grid. Additional information: http://www.leginfo.ca.gov/cgi-bin/displaycode?section=puc&group=08001-09000&file=8360-8369

Applicable Law: Public Utilities Code § 8360.



http://www.leginfo.ca.gov/cgi-bin/displaycode?section=puc&group=08001-09000&file=8360-8369

http://www.leginfo.ca.gov/cgi-bin/displaycode?section=puc&group=08001-09000&file=8360-8369

http://www.cpuc.ca.gov/general.aspx?id=3462

http://www.energy.ca.gov/title24/

Policies/Plans CPUC Decision 13-10-040, “Decision Adopting Energy Storage Procurement

Framework and Design Program” (2013) The Decision establishes policies and mechanisms for energy storage procurement, as required by AB 2514 (described above). The IOU procurement target is 1,325 megawatts of energy storage by 2020, with installations required no later than the end of 2024.

Additional information: http://docs.cpuc.ca.gov/PublishedDocs/Published/G000/M079/K5 33/79533378.PDF .

Governor’s Clean Energy Jobs Plan (2011) In June 2011, Governor Jerry Brown announced a plan to invest in clean energy and increase efficiency. The plan includes a goal of producing 20,000 megawatts (MW) of renewable electricity by 2020 by taking the following actions: addressing peak energy needs, developing energy storage, creating efficiency standards for buildings and appliances, and developing combined heat and power (CHP) projects. Specific goals include building 8,000 MW of large-scale renewable and transmission lines, 12,000 MW of localized energy, and 6,500 MW of CHP.

Additional information: http://gov.ca.gov/docs/Clean_Energy_Plan.pdf

California Public Utilities Commission’s Energy Efficiency Strategic Plan (2008)The Energy Efficiency Strategic Plan creates a roadmap for achieving energy efficiency within the residential, commercial, industrial, and agricultural sectors. The plan was updated in January 2011 to include a lighting chapter.

Additional information: http://www.cpuc.ca.gov/General.aspx?id=4125.

Integrated Energy Policy Report (Biennial) California Public Resources Code Section 25302 requires the Energy Commission to release a biennial report that provides an overview of major energy trends and issues facing the state. The IEPR assesses and forecasts all aspects of energy industry supply, production, transportation, delivery, distribution, demand, and pricing. The Energy Commission uses these assessments and forecasts to develop energy policies.

Additional information: http://www.energy.ca.gov/energypolicy Applicable Law: California Public Resources §§ 25300 et. seq.

Executive Order B-16-2012Governor Brown’s Executive Order B-16-2012 establishes expectations for agencies to expedite the rapid commercialization of zero emission vehicles (ZEV). The order was issued on March 23, 2012, directing California to “encourage the development and success of zero emission vehicles to protect the environment, stimulate economic growth and improve the quality of life in the State.” The Governor’s Executive Order sets a long-term target of reaching 1.5 million ZEVs on California’s roadways by 2025.

Executive Order B-29-15Governor Brown’s Executive Order B-29-15 orders that the California Energy Commission, jointly with the Water Board, shall implement a Water Energy Technology (WET) program to



http://www.cpuc.ca.gov/General.aspx?id=4125

http://gov.ca.gov/docs/Clean_Energy_Plan.pdf

http://docs.cpuc.ca.gov/PublishedDocs/Published/G000/M079/K5%2033/79533378.PDF

http://docs.cpuc.ca.gov/PublishedDocs/Published/G000/M079/K5%2033/79533378.PDF

deploy innovative water management technologies for businesses, residents, industries, and agriculture. The order was issued April 1, 2015. The WET Program “will achieve water and energy savings and greenhouse gas reductions by accelerating use of cutting-edge technologies such as renewable energy-powered desalination, integrated onsite reuse systems, water-use monitoring software, irrigation system timing and precision technology, and on-farm precision technology.” The Governor’s Executive Order is meant to achieve a statewide 25% reduction in potable urban water usage through February 28, 2016.

Executive Order B-30-15Governor Brown’s Executive Order B-30-15 orders that all state agencies with jurisdiction over sources of greenhouse gas emissions shall implement measures, pursuant to statutory authority, to achieve reductions of greenhouse gas emissions to meet the 2030 and 2050 greenhouse gas emissions reductions targets. This order was issued April 29, 2015, directing state agencies to take climate change into account in their planning and investment decisions, and employ full life-cycle cost accounting to evaluate and compare infrastructure investments and alternatives. The Governor’s Executive Order establishes a new interim statewide greenhouse gas emission reduction target to reduce greenhouse gas emissions to 40 percent below 1990 levels by 2030 in order to ensure California meets its target of reducing greenhouse gas emissions to 80 percent below 1990 levels by 2050.

AVAILABLE FUNDING AND HOW AWARD IS DETERMINED

1. A vailable Funding There is $350,000 available for the contract resulting from this RFP. This is an hourly rate plus cost reimbursement contract and the award will be made to the responsible Bidder receiving the highest score.

2. Match Funding Requirement Match funding is not required for this solicitation. However, Proposals that include match funding may receive additional points during the scoring phase.

“Match funds” include: (1) “cash in hand” funds; (2) equipment; (3) materials; (4) information technology services; (5) travel; (6) subcontractor costs; (7) contractor in-kind labor costs; and (8) “advanced practice” costs. Match funding sources include the prime contractor, subcontractors, partners, and pilot testing/demonstration/deployment sites (e.g., test site staff services). “Match funds” do not include Energy Commission awards, future/contingent awards from other entities (public or private), or the cost or value of the project work site.

o “Cash in hand” funds means funds that are in the recipient’s possession and are reserved for the proposed project, meaning that they have not been committed for use or pledged as match for any other project. “Cash in hand” funds include funding awards earned or received from other agencies for the proposed technologies or study (but not for the identical work). As applicable, proof that the funds exist as cash is required at the project kick-off meeting.

o “Equipment” means an item with a unit cost of at least $5,000 and a useful life of at least one year. Purchasing equipment with match funding is



encouraged because there are no disposition requirements at the end of the contract for such equipment.

o “Materials” means tangible project items that cost less than $5,000 and have a useful life of less than one year.

o “Information Technology Services” means the design, development, Proposal, implementation, support, and management of computer-based information systems directly related to the tasks in the Scope of Work. All information technology services in this area must comply with the electronic file format requirements in Subtask 1.1 (Products) of the Scope of Work.

o “Travel” means all travel required to complete the tasks identified in the Scope of Work. Travel includes in-state and out-of-state travel, and travel to conferences. Use of match funds for out-of-state travel and travel to conferences is encouraged.

o “Subcontractor Costs” means all costs incurred by subcontractors for the project, including labor and non-labor costs.

o “Contractor in-Kind Labor Costs” means contractor labor costs that are not charged to the Energy Commission.

o “Advanced Practice Costs” means costs not charged to the Energy Commission that represent the incremental cost difference between standard and advanced practices, measures, and products used to implement the proposed project. For example, if the cost of purchasing and/or installing insulation that meets the applicable building energy efficiency standard is $1/square foot and the cost of more advanced, energy efficient insulation is $3/square foot, the Recipient may count up to $2/square foot as match funds.

Match funds may be spent only during the contract term, either before or concurrently with EPIC funds. Match funds also must be reported in invoices submitted to the Energy Commission.

All bidders providing match funds must submit commitment letters that: (1) identify the source(s) of the funds; (2) justify the dollar value claimed; (3) provide an unqualified (i.e., without reservation or limitation) commitment that guarantees the availability of the funds for the project; and (4) provide a strategy for replacing the funds if they are significantly reduced or lost. Please see Attachment 9, Commitment and Support Letter Form.

3. Change in Funding Amount The Energy Commission reserves the right to reduce the contract amount to an amount deemed appropriate in the event the budgeted funds do not provide full funding of Energy Commission contracts. In this event, the Contractor and Contract Agreement Officer (CAO) shall meet and reach contract on a reduced scope of work commensurate with the level of available funding.

APPLICANT REQUIREMENTS

1. Eligibility This solicitation is open to all public and private entities and individuals, except for publicly owned electric utilities.

2. Terms and Conditions

Each contract resulting from this solicitation will include terms and conditions that set forth the recipient’s rights and responsibilities. By signing the Contractor Status Form



(Attachment 1), each bidder agrees to enter into a contract with the Energy Commission to conduct the proposed project according to the terms and conditions that correspond to its organization, without negotiation: (1) University of California/California State University terms and conditions; (2) U.S. Department of Energy terms and conditions; or (3) standard terms and conditions.

The standard terms and conditions and the University of California/California State University terms and conditions are located at http://www.energy.ca.gov/research/contractors.html. U.S. Department of Energy terms and conditions are under negotiation and will be posted to the Energy Commission website once finalized.

Failure to agree to the terms and conditions by taking actions such as failing to sign the Contractor Status Form or indicating that acceptance is based on modification of the terms will result in rejection of the proposal. Bidders must read the terms and conditions carefully. The Energy Commission reserves the right to modify the terms and conditions prior to executing contracts.

3. California Secretary of State Registration

All corporations, limited liability companies (LLCs), limited partnerships (LPs) and limited liability partnerships (LLPs) that conduct intrastate business in California are required to be registered and in good standing with the California Secretary of State prior to its project being recommended for approval at an Energy Commission Business Meeting. If not currently registered with the California Secretary of State, applicants are encouraged to contact the Secretary of State’s Office as soon as possible to avoid potential delays in beginning the proposed project(s) (should the application be successful). For more information, contact the Secretary of State’s Office via its website at www.sos.ca.gov. Sole proprietors using a fictitious business name must be registered with the appropriate county and provide evidence of registration to the Energy Commission prior to their project being recommended for approval at an Energy Commission Business Meeting.



http://www.sos.ca.gov/

http://www.energy.ca.gov/research/contractors.html

PRE-BID CONFERENCEThere will be one Pre-Bid Conference. Participation in this meeting is optional, but encouraged. The Pre-Bid Conference will be held at the date, time and location listed below. To confirm the date and time, please call (916) 654-4381 or refer to the Energy Commission's website at www.energy.ca.gov/contracts/index.html.

Date: Friday, October 20th, 2017Time: 1:00 to 2:30 PM (GMT-07:00) | 1 hour 30 minutes

California Energy Commission1516 9th Street

Sacramento, CA 95814Location: Imbrecht Hearing Room

Wheelchair accessible

Participation through Web ExYou may participate in this meeting through WebEx, the Energy Commission's online meeting service. Presentations will appear on your computer screen, and you may listen to audio via your computer or telephone. Please be aware that the meeting may be recorded.

---------------------- COMPUTER LOGON ---------------------- 1. Please go to https://energy.webex.com and enter the unique meeting number: 923 915 207 2. When prompted, enter your information. There is no password for this meeting. The topic for this meeting is for RFP-17-303 RFP-17-306 “Research Roadmaps for Distributed Energy Resources and Renewable Energy Resources. The “Join Conference” menu will offer you a choice of audio connections: 1. To call into the meeting: Select "I will call in" and follow the on-screen directions. 2. International Attendees: Click on the "Global call-in number" link. 3. To have WebEx call you: Enter your phone number and click "Call Me.”4. To listen over the computer: If you have a broadband connection, and a headset or a computer microphone and speakers, you may use VolP (Internet audio) by going to the Audio menu, clicking on “Use Computer Headset,” then “Call Using Computer.”NOTE: Access to WebEx meetings is now available from your mobile device. To learn more and access your app, please visit http://www.webex.com/overview/mobile-meetings.html

---------------------- TELECONFERENCE ---------------------- After logging in on the computer, an AUDIO CONFERENCE BOX will offer you the choice of phone connections:

1. TO HAVE WEBEX CALL YOU BACK: Type your area code and phone number and click "Call Me" 2. TO CALL INTO THE TELECONFERENCE: Use the drop-down box to select "I will call in" and follow the on-screen directions 3. INTERNATIONAL CALLERS: Click on the "Global call-in number" link in part (2) above



http://www.energy.ca.gov/contracts/index.html

4. TO LISTEN OVER THE COMPUTER: If you have the needed equipment and your computer is configured, click on "Use Computer Headset" and then "Call Using Computer" to use VoIP (Internet phone)

TELEPHONE ONLY (NO COMPUTER ACCESS): Call 1-866-469-3239 (toll-free in the U.S. and Canada). When prompted, enter the unique meeting number: 923 915 207. International callers may select their number from https://energy.webex.com/energy/globalcallin.php.

VIA MOBILE ACCESS: Access to WebEx meetings is now available from your mobile device. To download an app, go to www.webex.com/overview/mobile-meetings.html.

If you have difficulty joining the meeting, please call the WebEx Technical Support number at 1 866-229-3239.

QUESTIONSDuring the RFP process, questions of clarification about this RFP must be directed to the Contract Agreement Officer (CAO) listed below. You may ask questions at the Pre-Bid Conference, and you may submit written questions via mail, electronic mail, and by fax directed to the CAO. However, all questions must be received by 5:00 October 27, 2017.

A question and answer document will be e-mailed to all parties who attended the Pre-Bid Conference and provided their contact information on the sign-in sheet. The questions and answers will also be posted on the Commission’s website at: http://www.energy.ca.gov/contracts/index.html.

Any verbal communication with a Commission employee concerning this RFP is not binding on the State and shall in no way alter a specification, term, or condition of the RFP. Therefore, all communication should be directed in writing to the Energy Commission’s Agreement Officer assigned to the RFP.

CONTACT INFORMATION

Phillip Dyer, Commission Agreement OfficerCalifornia Energy Commission1516 Ninth Street, MS-18Sacramento, California 95814Telephone: (916) 654-4651 FAX: (916) 654-4423E-mail: [email protected]

RESPONSES TO THIS RFPResponses to this solicitation shall be in the form of an Administrative, Technical and Cost Proposal according to the format described in this RFP. The Administrative response shall include all required administrative documents. The Technical Proposal shall document the Bidder’s approach, experience, qualifications, and project organization to perform the tasks described in the Scope of Work, and the Cost Proposal shall detail the Bidder’s budget to perform such tasks.

REFERENCE DOCUMENTSBidders responding to this RFP may want to familiarize themselves with the following roadmaps:



mailto:[email protected]

http://www.webex.com/overview/mobile-meetings.html

https://energy.webex.com/energy/globalcallin.php

California Vehicle-Grid Integration (VGI) Roadmap: Enabling Vehicle-Based Grid Services California Independent Service Operator (ISO), February 2015. This roadmap assesses ways to develop solutions that enable electric vehicles to provide grid services while still meeting consumer driving needs.

http://www.caiso.com/Documents/Vehicle-GridIntegrationRoadmap.pdf

Roadmapping The California Smart Grid Through Risk Retirement Technology Manufacturer And Vendor Perspective

May 2014. A report on numerous smart grid integration potentials, integrating fundamental smart grid technologies, selected communications, automation and other critical technologies, as well as end‐use applications. The report also documented manufacturer and vendor perspectives. http://resnick.caltech.edu/docs/D-80955.pdf

Additional background materials can be found here: http://www.energy.ca.gov/2011_energypolicy/documents/2010-12-17_workshop/presentations/04_JPL-Tralli_Industry_Perspective.pdf

CPUC, California Long Term Energy Efficiency Strategic Plan, January 2011 Update

California Public Utilities Commission. 2011. An Action Plan with a roadmap for energy efficiency in California through the year 2020 and beyond, articulating long-term vision economic sectors.http://www.energy.ca.gov/ab758/documents/CAEnergyEfficiencyStrategicPlan.

Advancing and Maximizing the Value of Energy Storage Technology – A California RoadmapCalifornia ISO, December 2014. This roadmap identifies ways to expand revenue opportunities, reduce integration costs, and streamline policies and processes to increase certainty in energy storage.



http://www.energy.ca.gov/ab758/documents/CAEnergyEfficiencyStrategicPlan

http://www.energy.ca.gov/2011_energypolicy/documents/2010-12-17_workshop/presentations/04_JPL-Tralli_Industry_Perspective.pdf

http://www.energy.ca.gov/2011_energypolicy/documents/2010-12-17_workshop/presentations/04_JPL-Tralli_Industry_Perspective.pdf

http://resnick.caltech.edu/docs/D-80955.pdf

http://www.caiso.com/Documents/Advancing-MaximizingValueofEnergyStorageTechnology_CaliforniaRoadmap.pdf

Impacts of Distributed Generation On Air Quality: A Roadmap

June 2008. This roadmap assesses research needed to support the continued improvement of California’s air quality as the use of distributed generation increases. http://www.energy.ca.gov/2008publications/CEC-500-2008-022/CEC-500-2008-022.PDF

California’s Distributed Energy Resources Action Plan: Aligning Vision and Action

November 10, 2016. This plan provides a long-term vision for DER and supporting policies at the CPUC, identifies current and near-term actions to support this vision and establishes a mechanism to ensure DER activities at the CPUC are coordinated. http://www.cpuc.ca.gov/uploadedFiles/CPUC_Public_Website/Content/About_Us/Organization/Commissioners/Michael_J._Picker/2016%20DER%20Action%20Plan%20FINAL.pdf.

Demand Response and Energy Efficiency Roadmap: Maximizing Preferred Resources.California Independent System Operator. December 2014. This roadmap identifies four separate pathways to improve the marketplace for demand response and energy efficiency development and facilitate their integration into the grid. https://www.caiso.com/documents/dr-eeroadmap.pdf.

For examples, please see the following research roadmaps:

Natural Gas Vehicle Research RoadmapAugust 2009. A roadmap that identifies priority natural gas vehicle research, such as engine development, vehicle integration, fueling infrastructure, and storage. http://www.energy.ca.gov/2008publications/CEC-500-2008-044/CEC-500-2008-044-F.PDF

PIER Industrial, Agricultural, And Water Energy Efficiency Program RD&D Targets: A Consolidated Roadmap2011. This roadmap consolidates nine previous roadmaps, which were developed between 2003 and 2009 that identifies and prioritizes promising areas of research addressing a wide area of sectors, including data centers, the food industry, petroleum refining, and water/wastewater treatment and use. http://www.energy.ca.gov/2011publications/CEC-500-2011-035/CEC-500-2011-035.pdf

All above reference documents are on display and available for review in the Energy Commission’s Library. Library hours are Monday - Friday from 8:30 a.m. to 4:30 p.m., closed for lunch 12:00-1:00p.m. The Library is located at: California Energy Commission, 1516 Ninth Street, First Floor, Sacramento, CA 95814, (916) 654-4292.



https://www.caiso.com/documents/dr-eeroadmap.pdf

http://www.cpuc.ca.gov/uploadedFiles/CPUC_Public_Website/Content/About_Us/Organization/Commissioners/Michael_J._Picker/2016%20DER%20Action%20Plan%20FINAL.pdf



II. SCOPE OF WORK AND DELIVERABLESThis section provides background to this solicitation and describes the contract scope of work, deliverables and due dates under the direction of the Energy Commission Agreement Manager (CAM).

BACKGROUND/PROBLEM STATEMENTAdvancing renewable energy is a key part of the state’s efforts to achieve Governor Edmund G. Brown Jr.’s Executive Order B-30-15, establishing a statewide goal to reduce greenhouse gas emissions 40 percent below 1990 levels and to increase to 50 percent the electricity derived from renewable sources by 20304. Senate Bill 32 (Pavley, Chapter 249, Statutes of 2016) (SB 32) put into law a statewide goal to reduce greenhouse gas emissions 40 percent below 1990 levels by 2030. The Clean Energy and Pollution Reduction Act of 2015 (De León, Chapter 547, Statutes of 2015) (Senate Bill 350)5 put into law a requirement to serve 50 percent of California’s electricity use with renewable energy resources by 2030.

More specifically, Governor Brown’s Clean Energy Jobs Plan states that by 2020, California should produce 20,000 new megawatts (MH) of renewable electricity, including 8,000 MW of central station renewable capacity, accelerate the development of energy storage capacity and take other measures.6

The Energy Commission estimates that about 27 percent of its electricity retail sales in 2016 or over 26,000 MW were served by renewable energy generated by facilities of 1 MW in capacity or more from sources such as wind, solar, geothermal, biomass, and small hydroelectric7. Despite California’s success in increasing renewable energy generation, looking forward there remains significant challenges for integrating large amounts of renewable electricity into the state’s electric grid to achieve the 50 percent renewable generation.

The vast majority of renewable energy in California today is represented by wind and solar which pose challenges to the state’s grid because generation from these resources may vary over time in periods as short as seconds. This makes it difficult for grid operators to maintain a constant balance between generation supply and demand while also meeting requirements for controlling frequency and voltage fluctuations.8 To achieve this, grid operators must rely on natural-gas fired generation and/or curtailment of renewable energy generation to balance electricity flows on the grid.

Cost is also a significant barrier to greater renewable energy penetration of the California grid. Renewable technologies have a wide range of costs depending on the technology. More mature technologies, like geothermal and biomass, have a narrower range of levelized cost than emerging technologies, although biomass costs too can vary depending on feedstock availability. Historically, some renewable technologies had levelized costs greater than those of

4 https://www.gov.ca.gov/news.php?id=189385 Public Utilities Code Section 454.52(a) (1) (A) and similar language in 9621(b) (1).6 Governor Brown’s Clean Energy Jobs Plan, http://gov.ca.gov/docs/Clean_Energy_Plan.pdf.7 http://www.energy.ca.gov/renewables/tracking_progress/#renewable.8 Renewable Power in California: Status and Issues. 2011. http://www.energy.ca.gov/2011publications/CEC-150-2011-002/CEC-150-2011-002-LCF-REV1.pdf



http://www.energy.ca.gov/2011publications/CEC-150-2011-002/CEC-150-2011-002-LCF-REV1.pdf

http://www.energy.ca.gov/renewables/tracking_progress/#renewable

http://gov.ca.gov/docs/Clean_Energy_Plan.pdf

https://www.gov.ca.gov/news.php?id=18938

conventional generation, but this is changing. However, transmission line connection and grid integration costs remain high.

Senate Bill 96 (Chapter 356, Budget Act of 2013) directs the Energy Commission to award EPIC funds for projects that will benefit electricity ratepayers and lead to technological advancement and breakthroughs to overcome the barriers that prevent achieving the state’s statutory energy goals. To help ensure that EPIC funds are strategically focused and sufficiently narrow to make advancements on the most significant technological challenges, new analysis is needed that identifies and prioritizes RDD&D gaps to achieving California’s goals for integrating high-penetrations of renewable energy resources. This research roadmap should focus on RDD&D that addresses barriers and facilitates significant advances in technology and system architecture that include a cost/benefit analysis to show a probable path to market success.

RATEPAYER BENEFITS, TECHNOLOGICAL ADVANCEMENTS, AND BREAKTHROUGHSCalifornia Public Resources Code Section 25711.5(a) requires EPIC-funded projects to:

Benefit electricity ratepayers; and

Lead to technological advancement and breakthroughs to overcome the barriers that prevent the achievement of the state’s statutory energy goals.

The CPUC defines “ratepayer benefits” as greater reliability, lower costs, and increased safety.9 The CPUC has also adopted the following guiding principles as complements to the key principle of electricity ratepayer benefits: societal benefits; GHG emissions mitigation and adaptation in the electricity sector at the lowest possible cost; the loading order; low-emission vehicles/transportation; economic development; and efficient use of ratepayer monies.10

This contract will fund efforts to identify and prioritize research on the most critical RDD&D gaps that need to be addressed to achieve California’s goals for integrating high-penetrations of renewable energy resources in IOU service territories. Results of the analyses will be used to strategically target future EPIC investments in a manner that provides optimal benefits to IOU electric ratepayers, and maximizes the use of public research and development investments

The Proposal must describe how the contract will: (1) benefit California IOU ratepayers by increasing reliability, lowering costs, and/or increasing safety; and (2) lead to technological advancement and breakthroughs to overcome barriers to achieving the state’s statutory energy goals. Bidders may also discuss any benefits related to the EPIC guiding principles.

GOALS AND OBJECTIVESThe goal of this RFP is to develop, in consultation with stakeholders and subject matter experts, a research roadmap that identifies, describes and prioritizes key RDD&D needs for research on cost and technology breakthroughs for renewable energy generation. Specifically, this research roadmap must provide, based upon the input of stakeholders and experts:

1. An assessment of the current status of grid connected renewable energy and storage within California, including costs, trends and performance targets of emerging renewable

9 CPUC “Phase 2” Decision 12-05-037 at page 19, http://docs.cpuc.ca.gov/PublishedDocs/WORD_PDF/FINAL_DECISION/167664.PDF.10 Id. at pp. 19-20.




energy technologies as well as identifying what emerging and breakthrough technologies are possible.

2. Identify significant barriers to achieving greater use of renewable energy and storage in California and the information needed to address these barriers.

3. Assess current research efforts both at the state and federal level that are addressing these knowledge gaps.

4. Identify suitable research gaps at the applied, demonstration and deployment stages that may be addressed by the EPIC Program.

5. Develop a methodology for prioritizing future research needs in the near (1 to 3 years), mid-term (3-5 years) and long-term (>5 years).

6. Apply this methodology to the research gaps to prioritize near, mid- and long-term research needs.

7. Identify critical indicators of success for renewable energy resource technologies and strategies, as well as a methodology utilizing these indicators to estimate benefits, including benefits to IOU electric ratepayers.

8. Develop performance and cost targets, and other metrics to be critical indicators of research success and the probability of marketing success.

9. Provide comprehensive references, workshop summaries, comments and attendees to document road mapping process.

SCOPE OF WORKEach proposal must include a Scope of Work that describes the methods and strategies the contractor will perform to determine baseline conditions and paths for technological or strategic advancements, engage relevant stakeholders, and develop metrics and indicators for success.

The Research Roadmap on Cost and Technology Breakthroughs for Renewable Energy Generation should focus on technologies and solutions that increase the cost competitiveness, flexibility and reliability of renewable energy generation and operation to facilitate greater renewable energy penetration in the state’s grid. Topics that could be addressed include:

Reductions in renewable energy capital and operating costs Development of faster renewable energy ramping rate flexibility Increase in non-variable renewable capacity Improved integrated resource forecasting Advancements in low-cost, high efficient grid connected (utility scale) storage Critical transmission line architectural and telemetry needs Other factors facilitating renewable energy siting Other barriers and possible solutions to achieving greater use of renewable energy and

storage

The proposal must include a list of topic areas that will be addressed in the roadmap and a justification for selecting those topic areas.



The Bidder who receives a contract from the Energy Commission as a result of this RFP is referred to as the “Contractor” and will perform the tasks specified in a Scope of Work under the direction of the Energy Commission’s Agreement Manager (CAM). The CAM will oversee the management and administration of the contract.

The Scope of Work will be submitted with the contractor’s proposal and will describe the tasks required to conduct and complete the roadmap. The following Scope of Work will be used in the proposal. Starting with Task 2, Technical Assessment of Renewable Energy Resources Technologies and Strategies, additions may be made to the tasks as appropriate.

Task ListTask # Task Name1 Administration and Contract Management2 Technical Assessment of Renewable Energy Resources Technologies

and Strategies3 Finalize Methodology for Developing the Research Roadmap4 Develop the Research Roadmap5 Finalize the Research Roadmap

Task 1 Administration and Contract ManagementThe Contractor shall manage a team capable of undertaking all work assignments identified in this Scope of Work. The CAM will prepare and define the scope of work, the schedule of deliverables, and the project budget. Final assignment of tasks and maximum payment for individual projects will be signed by the Contractor and the Commission.

All project work performed by the Contractor team shall be directed by and coordinated with Energy Commission staff as designated by the CAM. Work performed by the Contractor or its subcontractors beyond the term end date of the contract will not be reimbursed for payment.

Task 1.1 Kick-off MeetingThe goal of this subtask is to establish the lines of communication and procedures for implementing this Contract. The meeting will be held in Sacramento, CA and the CAM will designate the specific location, or via Web-Ex or teleconference. The administrative and technical aspects of this Contract will be discussed at the meeting.

The administrative portion of the meeting will include discussion of the following:

Terms and conditions of the Contract; Administrative deliverables; Project meetings and briefings; Match fund documentation (if applicable); Permit documentation (if applicable); Subcontracts; and Any other relevant topics.

The technical portion of the meeting will include discussion of the following:

The CAM’s expectations for accomplishing tasks described in the Scope of Work; An updated Project Schedule;



Technical deliverables; Progress reports and invoices; Final Report; and Any other relevant topics.

The Contractor shall: Attend a “kick-off” meeting with the CAM, the CAO, and a representative of the Accounting

Office.

o The meeting will be held via Web-Ex or teleconference. The Contractor shall include their Project Manager, Contracts Administrator, Accounting Officer, and others desig-nated by the CAM in this meeting. The administrative and technical aspects of this Contract will be discussed at the meeting.

Provide a List of Match Funds, as applicable. If necessary, prepare an updated Schedule of Deliverables based on the decisions made in

the kick-off meeting.

The CAM shall: Arrange the meeting including scheduling the date and time. Provide an agenda to all potential meeting participants prior to the kick-off meeting.

Deliverables: An Updated Schedule of Deliverables (if applicable) A List of Match Funds (if applicable)

Task 1.2 InvoicesThe goal of this subtask is to ensure that invoices contain all required information and are submitted in the appropriate format.

The Contractor shall: Prepare quarterly invoices for all reimbursable expenses incurred performing work under

this Contract in compliance with the Exhibit B of the Terms and Conditions of the Contract and in the format provided by the CAM. In addition, each invoice must document and verify:

o Energy Commission funds received by California-based entitieso Energy Commission funds spent in California (if applicable)o Match fund expenditures (if applicable)

Invoices shall be submitted with the same frequency as progress reports (task 1.3). Invoices must be submitted to the Energy Commission’s Accounting Office.

Deliverables: Quarterly Invoices

Task 1.3 Quarterly Progress ReportsThe goal of this task is to periodically verify that satisfactory and continued progress is made towards achieving the objectives of this Contract.

The Contractor shall: Prepare progress reports that summarize all Contract activities conducted by the Contractor

and any subcontractors for the reporting period, including an assessment of the ability to



complete the Contract within the current budget and any anticipated cost overruns. Each progress report is due within 15 calendar days after the end of the reporting period. The CAM will provide the format for the progress reports.

Deliverables:

Quarterly Progress Reports

Task 1.4 Manage SubcontractorsThe goal of this subtask is to ensure quality products, to enforce subcontractor Contract provisions, and in the event of failure of the subcontractor to satisfactorily perform services, recommend solutions to resolve the problem.

The Contractor shall: Manage and coordinate subcontractor activities. The Contractor is responsible for the quality

of all subcontractor work and the Energy Commission will assign all work to the Contractor. If the Contractor decides to add new subcontractors, they shall 1) comply with the Terms and Conditions of the Contract, and 2) notify the CAM who will follow the Energy Commission’s process for adding or replacing subcontractors.

Prepare and submit a subcontractor conflict of interest policy to ensure that no conflicts of interest exist between subcontractors.

Deliverables:

Written notification to CAM of subcontractor change.

Task 1.5 Project Meetings and BriefingsThe goal of this subtask is to determine whether any modifications must be made to the tasks, products, schedule, or budget. Project meetings provide the opportunity for frank discussions between the Energy Commission and the Contractor. As determined by the CAM, discussions may include project status, challenges, successes, findings, project goals and benefits, recommendations, and final report preparation. Participants will include the CAM and the Contractor, and may include the CAO and any other individuals selected by the CAM to provide support to the Energy Commission.

The Contractor shall: Attend or participate in program support and project-related meetings or discussions in person

or via WebEx or conference call, as requested by the CAM. Respond to e-mails or other written communication requests regarding project management

status and issues, as requested by the CAM. Prepare meeting notes for each formal meeting that: (1) discusses the progress of the

Contract toward achieving its goals and objectives; and (2) includes recommendations and conclusions regarding continued work on the project, as requested by the CAM.

Submit the meeting notes to the CAM for review and approval.

Deliverables: Responses to written requests on project status. Meeting notes for each formal meeting.



Task 1.6 Technical Advisory Committee (TAC)The goal of this subtask is to create an advisory committee for this Contract. The TAC should be composed of diverse professionals in the renewable energy sector. The composition will vary depending on interest, availability, and need. TAC members will serve at the CAM’s discretion. The purpose of the TAC is to:

Provide guidance in project direction. The guidance may include scope and methodologies, timing, and coordination with other projects. The guidance may be based on:

o Technical area expertise;o Knowledge of market applications; oro Linkages between the Contract work and other past, present, or future projects (both

public and private sectors) that TAC members are aware of in a particular area.

Review products and provide recommendations for needed product adjustments, refinements, or enhancements.

Evaluate the tangible benefits of the project to the State of California, and provide recommendations as needed to enhance the benefits.

The TAC shall be composed of qualified professionals with expertise which may span the following types of disciplines:

Researchers knowledgeable about the project subject matter; Members of trades that will apply the results of the project (e.g., designers, engineers,

architects, contractors, and trade representatives); Product developers relevant to the project; Members of relevant technical society committees.

The Contractor shall: Prepare a List of Potential TAC Members that includes the names, companies, physical and

electronic addresses, and phone numbers of potential members. The list will be discussed at the Kick-off meeting, and a schedule for recruiting members and holding the first TAC meeting will be developed.

Recruit TAC members. Ensure that each individual understands member obligations and the TAC meeting schedule developed in subtask 1.7.

Prepare a List of TAC Members once all TAC members have committed to serving on the TAC.

Submit Documentation of TAC Member Commitment (such as Letters of Acceptance) from each TAC member to the CAM.

Deliverables: List of Potential TAC Members List of TAC Members Documentation of TAC Member Commitment

Subtask 1.7 TAC Meetings The goal of this subtask is for the TAC to provide strategic guidance for the project by participating in regular meetings, which may be held via teleconference.



The Contractor shall: Discuss the TAC meeting schedule with the CAM at the Kick-off meeting. Determine the

number and location of meetings (in-person and via teleconference) in consultation with the CAM.

Prepare a TAC Meeting Schedule that will be presented to the TAC members during recruiting. Revise the schedule after the first TAC meeting to incorporate meeting comments.

Prepare a TAC Meeting Agenda and TAC Meeting Back-up Materials for each TAC meeting. Organize and lead TAC meetings in accordance with the TAC Meeting Schedule. Changes

to the schedule must be pre-approved in writing by the CAM. Prepare TAC Meeting Summaries that include any recommended resolutions of major TAC

issues.

Deliverables: TAC Meeting Schedule (draft and final) TAC Meeting Agendas (draft and final) TAC Meeting Back-up Materials TAC Meeting Summaries

Task 1.8 Final ReportThe goal of this subtask is to prepare a written Final Report. The Final Report shall be prepared in language easily understood by the public or layperson with a limited technical background.

The Final Report must be completed before the termination date of the Contract in accordance with the Schedule of Deliverables.

The Final Report shall be a public document. If the Contractor’s work on all or part of this project has obtained confidential status from the Energy Commission, then the Contractor must prepare both a public and a confidential version of the Final Report, and the Contractor shall perform the following subtasks for both the public and confidential versions of the Final Report. When creating the Final Report, the Recipient must use a Style Manual provided by the CAM.

Task 1.8.1 Final Report Outline The Contractor shall: Prepare a draft outline of the Final Report. Submit the draft outline of the Final Report to the CAM for review and approval. The CAM

will provide written comments to the Contractor on the draft outline. The Contractor shall review the comments and discuss any concerns regarding the recommended changes with the CAM.

Prepare and submit the final outline of the Final Report, incorporating the CAM’s comments.

Deliverables: Draft Outline of the Final Report Outline of the Final Report

Task 1.8.2 Final Report The Contractor shall: Prepare the draft Final Report for this Contract in accordance with the approved final report

outline.



Submit the draft Final Report for review and comment. The CAM will provide written com-ments to the Contractor. The Contractor shall review the comments and discuss any issues with the recommended changes with the CAM.

Prepare and submit the Final Report, incorporating CAM comments.

Deliverables: Draft Final Report Final Report

Task 1.9 Final Meeting The goal of this subtask is to discuss closeout of this Contract and review the project. The meeting will be held in Sacramento, CA and the CAM will designate the specific location, or via Web-Ex or teleconference. The administrative and technical aspects of Contract closeout will be discussed at the meeting.

The Contractor shall: Meet with Energy Commission staff prior to the term end-date of this Contract. This meeting

will be attended by the Contractor Project Manager and the CAM. The CAM will determine any additional appropriate meeting participants.

Present findings, conclusions, and recommended next steps (if any) for the Contract, based on the information included in the Final Report.

Prepare a written document of meeting agreements and unresolved activities. Prepare a schedule for completing the closeout activities for this Contract, based on

determinations made during the meeting. Provide ALL Draft and Final written deliverables provided under this Contract on a CD-ROM

or USB memory stick, organized by the tasks in the Contract.

Deliverables: Written documentation of meeting contracts Schedule for completing closeout activities CD-ROM or USB memory stick containing ALL draft and final written deliverables provided

under this Contract, organized by task

Task 1.10 Match Funds (If applicable)The goal of this subtask is to ensure that the Contractor obtains any match funds planned for this Contract and applies them to the Contract during the Contract term.

While the costs to obtain and document match funds are not reimbursable under this Contract, the Contractor may spend match funds for this task. The Contractor may only spend match funds during the Contract term, either concurrently or prior to the use of Energy Commission funds. Match funds must be identified in writing, and the Contractor must obtain any associated commitments before incurring any costs for which the Contractor will request reimbursement.

The Contractor shall: If match funds were a part of the proposal that led to the Energy Commission awarding this

Contract, prepare a Match Funds Status Letter that documents the match funds committed to this Contract and includes:

o A list of the match funds that identifies:



The amount of cash match funds, their source(s) (including a contact name, address, and telephone number), and the task(s) to which the match funds will be applied.

The amount of each in-kind contribution, a description of the contribution type (e.g., property, services), the documented market or book value, the source (including a contact name, address, and telephone number), and the task(s) to which the match funds will be applied. If the in-kind contribution is equipment or other tangible or real property, the Contractor must identify its owner and provide a contact name, address, telephone number, and the address where the property is located.

o A copy of a letter of commitment from an authorized representative of each source of match funding that the funds or contributions have been secured.

At the Kick-off meeting, discuss match funds and the impact on the project if they are significantly reduced or not obtained as committed. If applicable, match funds will be included as a line item in the progress reports and will be a topic at project meetings and briefings.

Provide a Supplemental Match Funds Notification Letter to the CAM if receipt of additional match funds is obtained.

Provide a Match Funds Reduction Notification Letter to the CAM if existing match funds are reduced during the course of the contract. Reduction of match funds may trigger a project meeting.

Deliverables: Match Funds Status Letter Supplemental Match Funds Notification Letter (if applicable) Match Funds Reduction Notification Letter (if applicable)

Technical TasksTask 2 Technical Assessment of Renewable Energy Resources Technologies and StrategiesThe goal of this task is to develop a technical assessment of the current baseline and best in class renewable energy resource technologies and strategies, including cost and performance attributes.

The Contractor shall: Prepare a draft and final Literature Review of peer reviewed technical journals,

government reports, trade journals and other high quality sources of information regarding performance specifications of technology used in current renewable energy installations. Include references for all sources.

Prepare and submit a draft List of Experts to Interview regarding the current cost and performance attributes of renewable energy resource technologies and strategies; developing trends and opportunities of specific technologies and strategies to facilitate increased penetrations of renewable energy resources into the electrical grid; and identify other critical indicators of success.

Prepare and submit a draft list of Interview Questions to use when interviewing experts on topics listed above.

Submit the final List of Experts and final Interview Questions, incorporating the CAM’s comments.

Conduct interviews with experts regarding pathways to integrating high-penetrations of renewable energy resources into the electrical grid, baseline and best in class renewable energy technologies and strategies, including cost and performance attributes of specific



renewable energy resource technologies, current and anticipated research and critical indicators of success.

Using information from the literature review and expert interviews, prepare and submit a draft Outline of the Technical Assessment to the CAM for review and approval. The CAM will provide written comments to the Contractor. The Contractor shall review the comments and discuss any concerns regarding the recommended changes with the CAM.

Submit the final Outline of the Technical Assessment, incorporating the CAM’s comments.

Submit the draft Technical Assessment of Renewable Energy Resources Technologies and Strategies that follows the approved outline for review and comment. The CAM will provide written comments to the Contractor. The Contractor shall review the comments and discuss any concerns regarding the recommended changes with the CAM.

Submit the final Technical Assessment of Renewable Energy Resource Technologies and Strategies, incorporating the CAM’s comments.

Deliverables: Literature Review (Draft and Final). List of Experts to Interview (Draft and Final). Interview Questions (Draft and Final). Outline of the Technical Assessment (Draft and Final). Technical Assessment of Renewable Energy Resources Technologies and Strategies

(Draft and Final).

Task 3 Finalize Methodology for Developing the Research Roadmap

The goal of this task is to finalize the methodology submitted in Recipient’s proposal for developing the Research Roadmap for Cost and Technology Breakthroughs for Renewable Energy Generation (Research Roadmap). The Contractor shall finalize the methodology based on comments from Energy Commission staff on the draft methodology submitted in Recipient’s proposal and the Technical Assessment to be prepared in Task 2.

The methodology should describe at a minimum: Proposed topics to be covered in the Research Roadmap. The Contractor’s proposed approach to:

o Incorporate information from the Technical Assessment to be prepared in Task 2 into the Research Roadmap.

o Coordinate and collaborate with Energy Commission staff, including periodic check-in points with the CAM at key milestones and decision-points in the development of the Research Roadmap.

o Solicit input from experts and stakeholders on RDD&D gaps and needs for key topics in the Research Roadmap.

o Identify and prioritize the most important RDD&D gaps. o Coordinate with Energy Commission staff to identify and select venue(s) for topic

specific workshops (including plans for recording and creating detailed workshop transcripts).

o Create all necessary presentation materials and hand-outs for workshop attendees.

o Coordinate with Energy Commission staff on handling logistics for scheduling, setting up and facilitating workshop(s) to solicit input from experts and



stakeholders on RDD&D gaps and needs for key topics in the Research Roadmap.

The Contractor shall: Meet with the CAM, and others invited by the CAM, to discuss finalizing the methodology

for developing the Research Roadmap. This strategy meeting shall take place within ten (10) business days after the Kick-Off Meeting. This strategy meeting will be held at the Energy Commission.

Prepare and submit a summary of comments received at the strategy meeting. Finalize the Methodology for developing the Research Roadmap by incorporating

feedback from CAM and Energy Commission staff.

Deliverables: Methodology for developing Research Roadmap (Draft and Final). Summary of comments.

Task 4 Develop the Research Roadmap

The goal of this task is to develop the Research Roadmap in accordance with methodology finalized in Task 3. When creating the Research Roadmap, the Contractor must use a Style Manual provided by the CAM. The Research Roadmap must include but may not be limited to the following:

A detailed description of critical barriers preventing the state from achieving its goals for integrating high-penetrations of renewable energy resources in IOU service territories.

Summary analysis of past and current research efforts and results around key topics identified in the Research Roadmap.

Description of RDD&D gaps and recommended and prioritized RDD&D activities for each topic needed to achieve cost-effective integration of high-penetrations of renewable energy resources, including:

o Technical performance and cost targets for promising technologies. o Critical indicators of success. o Sequencing and prioritization of recommended RDD&D activities.o Estimated funding amounts.o Coordination and timing with other activities and programs.

Description of the Methodology used in developing the research roadmap. This should include a list of experts and stakeholders, including their organization and area of expertise, consulted during the development of the research roadmap.

An analysis of probable path to market success, including description of critical milestones and performance, costs and other indicators of the probability of marketing success.

The Contractor shall: Conduct the following activities in accordance with the methodology finalized in Task 3:



o Incorporate information from the Technical Assessment to be prepared in Task 2 into the Research Roadmap.

o Coordinate and collaborate with Energy Commission staff, including periodic check-in points with the CAM at key milestones and decision-points in the development of the Research Roadmap.

o Solicit input from experts and stakeholders on RDD&D gaps and needs for key topics in the research roadmap.

o Identify and prioritizing the most important RDD&D gaps. o Identify and recruiting experts and stakeholders to participate in topic specific

workshopso Coordinate with Energy Commission staff to identify and select venue(s) for topic

specific workshops (including plans for recording and creating detailed workshop transcripts)

o Create all necessary presentation materials and hand-outs for workshop attendeeso Coordinate with Energy Commission staff on handling logistics for scheduling, setting

up and facilitating workshop(s) to solicit input from experts and stakeholders on RDD&D gaps and needs for key topics in the Research Roadmap.

o Develop a public workshop agenda with CAM. o Upon approval of the public workshop agenda from CAM, conduct the public

workshop to solicit stakeholder comments on the Research Roadmap themes.

Prepare and submit a summary of all interviews and questionnaires conducted with subject matter experts and industry stakeholders as part of the Research Roadmap development.

Submit a Summary of all Workshop Outcomes and Interviews. Submit the draft Outline of the Research Roadmap to the CAM for review and approval. The

CAM will provide written comments to the Contractor on the draft outline. The Contractor shall review the comments and discuss any concerns regarding the recommended changes with the CAM.

Submit the final Outline of the Research Roadmap, incorporating the CAM’s comments. Submit the draft Research Roadmap for review and comment. The CAM will provide written

comments to the Contractor. The Contractor shall review the comments and discuss any is-sues with the recommended changes with the CAM.

Deliverables: Summary of all Workshop Outcomes and Interviews. Public Workshop Agenda (Draft and Final). Outline of the Research Roadmap (Draft and Final). Research Roadmap (Draft).

Task 5 Finalize the Research RoadmapThe goal of this task is to finalize the Research Roadmap in accordance with the Methodology finalized in Task 3. The Research Roadmap shall be written in a format that is beneficial for both technical experts and a more general audience, including visual aids to outline priority research areas. The Research Roadmap shall include an executive summary that summarizes findings. The Research Roadmap shall also include a discussion of how estimates regarding customer adoption and technology development were concluded.

The Contractor shall:o Submit the final Research Roadmap.



o Submit Bibliography of all relevant sources and materials used in preparation of the Research Roadmap.

o Prepare and submit Analytical Data used to prepare the estimates included in the Research Roadmap.

o Coordinate with CAM on handling logistics for scheduling, setting up and facilitating workshop(s) to solicit input on Research Roadmap.

o Conduct, with approval from CAM, a public workshop to solicit stakeholder comments on the Research Roadmap

o Compile public comments into a Public Workshop Meeting Minutes document.o Incorporate public comments, as appropriate into the final Research Roadmap.

Deliverables: Final Research Roadmap. Bibliography. Analytical Data. Public Workshop Meeting Minutes.

Schedule of Deliverables and Due DatesTask Deliverable Due Date1 Contract Management

1.1 Updated schedule of deliverables (if

applicable). A list of Match Funds (if applicable).

1 week following the Kick-off meeting.

At the Kick-off meeting.1.2 Quarterly Invoices Quarterly with Progress Reports1.3 Quarterly Progress Reports Quarterly with Invoices

1.4

Written notification to CAM of subcontractor change.

The subcontractor conflict of interest policy.

If applicable

1.5 Responses to written requests on

project status. Meeting notes for each formal meeting.

As requested by CAM

1.6

List of Potential TAC Members List of TAC Members Documentation of TAC Member

Commitment

At the Kick-off meeting. 2 weeks following the Kick-off

meeting. 4 weeks following the Kick-off

meeting.

1.7

TAC Meeting Schedule (draft and final) TAC Meeting Agendas (draft and final) TAC Meeting Back-up Materials TAC Meeting Summaries

TBD

1.8.1

Draft outline of the Final Report. Final outline of Final Report.

6 months prior to contract end-date.

2 days following receipt of CAM approval.

1.8.2

Draft Final Report. Final Report.



1.9 Written documentation of meeting 8 months prior to contract end-



agreements. Schedule for completing closeout

activities. CD-ROM or USB memory stick

containing ALL draft and final written deliverables provided under this Contract, organized by task.

date. 6 months prior to contract end-

date. 2 months prior to contract end-

date.

1.10

Match Funds Status Letter Supplemental Match Funds Notification

Letter (if applicable) Match Funds Reduction Notification

Letter (if applicable)

TBD

2Technical Assessment of Renewable Energy Resources Technologies and Strategies

Draft Literature Review. Final Literature Review. Draft List of Experts to Interview. Final List of Experts to Interview. Draft Interview Questions. Final Interview Questions. Draft Outline of Technical

Assessment. Final Outline of Technical

Assessment. Draft Technical Assessment. Final Technical Assessment.

TBD

3 Finalize Methodology for Developing the Research Roadmap

Draft Methodology for Developing Research Roadmap.

Summary of comments. Final Methodology for Developing

Research Roadmap.

2 weeks after Kickoff meeting. TBD 4 weeks after Kickoff meeting.

4 Develop the Research Roadmap Summary of all workshop

outcomes and interviews. Outline of the Research Roadmap

(Draft and Final). First Draft of Research Roadmap.

TBD

5 Finalize the Research Roadmap Final Research Roadmap. Bibliography. Analytical Data. Public Workshop Meeting Minutes.

TBD



III. Proposal Format, Required Documents, and Delivery

ABOUT THIS SECTIONThis section contains the format requirements and instructions on how to submit a proposal. The format is prescribed to assist the Bidder in meeting State bidding requirements and to enable the Commission to evaluate each proposal uniformly and fairly. Bidders must follow all Proposal format instructions, answer all questions, and supply all requested data.

REQUIRED FORMAT FOR A PROPOSALAll proposals submitted under this RFP must be typed or printed using a standard 11-point font, singled-spaced and a blank line between paragraphs. Pages must be numbered and sections titled and printed back-to-back. Spiral or comb binding is preferred and tabs are encouraged. Binders are discouraged.

NUMBER OF COPIESBidders must submit the original and five copies of the proposal (Sections 1 and 2).

Bidders must also submit electronic files of the proposal on CD-ROM or USB memory stick along with the paper submittal. Only one CD-ROM or USB memory stick is needed. Electronic files must be in Microsoft Word 2007 (.doc format) and Excel Office Suite formats. Completed Budget Forms, Attachment 7, must be in Excel format. Electronic files submitted via e-mail will not be accepted.

PACKAGING AND LABELINGThe original and copies of the proposal must be labeled "Request for Proposal 17-303," and include the title of the proposal and the appropriate section number. Include the following label information and deliver your proposal, in a sealed package:

Person’s Name, Phone #Bidder’s NameStreet AddressCity, State, Zip CodeFAX #

RFP-17-303Contracts Office, MS-18California Energy Commission1516 Ninth Street, 1st FloorSacramento, California 95814



PREFERRED METHOD FOR DELIVERYBidder may deliver a proposal by:

U. S. Mail Personally Courier service

Proposals must be delivered no later than 5:00 p.m., to the Commission Contracts Office during normal business hours and prior to the date and time specified in this RFP. In accordance with Public Contract Code 10344, proposals received after the specified date and time are considered late and will not be accepted. There are no exceptions to this law. Postmark dates of mailing, E-mail and facsimile (FAX) transmissions are not acceptable in whole or in part, under any circumstances.

ORGANIZE YOUR PROPOSAL AS FOLLOWS1. For all hard copy submittals, submit attachments in the order specified below.

2. Label the application cover “Request of Funding RFP-17-303” and include: (a) the title of the application; and (b) the applicant’s name.3. Separate each section of the application by a tab that is labeled only with the tab number and section title indicated below.

SECTION 1, Administrative Response

Cover Letter

Table of Contents

Contractor Status Form Attachment 1

Darfur Contracting Act Form Attachment 2

Small Business Certification If applicable

Completed Disabled Veteran Business Enterprise form Attachment 3

Bidder Declaration form GSPD-05-105 Attachment 4

Contractor Certification Clauses Attachment 5

TACPA Forms If applicable

California Civil Rights Laws Certification Attachment 10



SECTION 2, Technical and Cost Proposal

Technical Merit and Need

Technical Approach

Team Qualifications, Capabilities, and Resources

Previous Work Products

Budget and Cost Effectiveness

EPIC Funds Spent in California

Client References Attachment 6

Budget Forms Attachment 7 Also see below.

Commitment and Support Letters Attachment 9

Below is a description of each required Technical and Cost Proposal section of the application. Completeness in submitting all the required information requested in each attachment will be factored into the scoring:

1. Technical Need and MeritThis description should include how the project will advance, supplement and frame current technological and scientific understanding and knowledge. Include a comprehensive summary of the current status of renewable energy technologies, relevant data availability and knowledge of priority research worth further examining.

2. Technical ApproachAs part of the proposal, the applicant shall provide a draft methodology for developing the Research Roadmap. If the proposal is funded, the draft methodology shall be further developed in Task 3. The proposal shall submit a technical approach to completing the Research Roadmap. The technical approach will be assessed based on the applicant’s response to each of the criteria listed below:

Describes the technique, approach, and methods to be used in providing the services listed in the Scope of Work, highlighting any outstanding features, qualifications and experience.

Describes how tasks will be executed and coordinated with various participants and team members.

Identifies and discusses factors critical for success, in addition to risks, barriers, and limitations. Provides a plan to address them.

Describes how the knowledge gained, literature review results, and lessons learned will be made available to the public and key decision-makers.

3. Team Qualifications, Capabilities, and Resourcesa) Describes the organizational structure of the Bidder and the project team. Include an

organizational chart that illustrates the structure.



b) Identifies key team members, including the project manager and principal investigator.

c) Provide a current resume for all team members listed, including job classification, relevant experience, education, academic degrees and professional licenses.

d) Provides detailed estimates of hours for each task for each team member.e) Explains how the various tasks will be managed and coordinated, and how the

project manager’s technical expertise will support the effective management and coordination of all activities described in the Scope of Work.

f) Describes the facilities, infrastructure, and resources available to the team.g) Describes the team’s history of successfully completing projects. h) References are provided as required and are current, meaning within the past three

years (include this information in the Client References Form Attachment). References will be checked and scored accordingly.

i) Identifies any collaboration with utilities, industries, or others. Explain the nature of the collaboration and what each collaborator will contribute.

j) Demonstrates that the Bidder has the financial ability to complete the project, as indicated by the responses to the following questions:

• Has your organization been involved in a lawsuit or government investigation within the past ten years?

• Does your organization have overdue taxes? • Has your organization ever filed for or does it plan to file for bankruptcy? • Has any party that entered into an contract with your organization terminated

it, and if so for what reason? • For Energy Commission agreements or contracts listed in the Proposal that

were executed (i.e., approved at a Commission business meeting and signed by both parties) within the past five years, has your organization ever failed to provide a final report by the date indicated in the agreement or contract?

4. Previous Work Products Each Bidder shall provide at least one example of a similar work or academic research product, for the services to be provided as described in the RFP. If subcontractors will be providing technical support in a task area, each subcontractor shall also submit one example of a work or academic product that demonstrates experience in potential work assignments described in this RFP.

Where appropriate work or academic products should describe in detail and highlight the Bidder’s ability to support tasks identified in this RFP including equations, data analysis methods and strategies, data schema, and diagrams.

It is not necessary to provide more than one copy of each work product example. Web links are acceptable.

Do not provide any confidential information.

5. Budget and Cost-Effectiveness Provide a justification for the reasonableness of the costs for direct labor, non-labor

(e.g., indirect overhead, general and administrative costs, and profit), and operating expenses by task for the team.

Provide a justification for why the hours proposed by each team member are reasonable to accomplish the work identified in the Scope of Work.



Describe how the Bidder proposes to minimize the costs for program administration and overhead, and maximize the amount of funds for the technical tasks in the Scope of Work. The Fringe Benefits form in the budget forms will also provide a formula which demonstrates the ratio of direct labor and fringe benefits to loaded rates. This result will be used to help determine the Bidders score in the evaluation).

6. EPIC Funds Spent in California

Projects that spend EPIC funds in California will receive points as indicated in the table below. “Spent in California” means that: (1) Funds under the “Direct Labor” category and all categories calculated based on direct labor in the Direct Labor tab are paid to individuals who pay California state income taxes on wages received for work performed under the contract; and (2) Business transactions (e.g., material and equipment purchases, leases, rentals, and contractual work) are entered into with a business located in California.

Airline ticket purchases and payments made to out-of-state workers are not considered funds “spent in California.” However, funds spent by out-of-state workers in California (e.g., hotel and food) are considered funds “spent in California.”

Percentage of EPIC funds spent in CA

Percentage of Possible Points

>60% 20%>70% 40%>80% 60%>90% 80%>100% 100%

7. Client References (Attachment 6)Each bidder shall complete Client Reference Forms (Attachment 6) for current (within the past three years) references. Three client references are required for the Contractor and three for each subcontractor.

8. Budget Forms (Attachment 7)The budget forms are in MS Excel format. Detailed instructions for completing them are included at the beginning of Attachment 7. Read the instructions before completing the worksheets. Complete and submit information on all budget worksheets. The salaries, rates, and other costs entered on the worksheets will become a part of the final contract.

Rates and personnel shown must reflect rates and personnel you would charge if you were chosen as the Contractor for this RFP. Bidder must include all people anticipated who will provide service on the Contract. The Energy Commission may consider adding a person that the Bidder did not include in its Proposal. However, because the additional person might affect the Bidder's score or take additional time that the Energy Commission does not have or does not want to spend, the Energy Commission reserves the right to do any of the following, along with any other existing rights:• Assess how the new person might affect the Bidder’s score, including possibly rescoring

the Proposal • Refuse to add the new person• Add the new person.



Bidders are cautioned that they should include all team members in their Proposal. The Energy Commission does not want to be in the position of assessing additional persons after the Notice of Proposed Award.

The salaries, rates, and other costs entered on these forms become a part of the final contract. The entire term of the contract and projected rate increases must be considered when preparing the budget. The rates bid are considered capped and shall not change during the term of the contract. The Contractor shall only be reimbursed for their actual rates up to these rate caps. The labor rates shall be unloaded (before fringe benefits, overheads, general & administrative (G&A) or profit).

All budget forms are required because they will be used for the contract prepared with the winning Bidder.

NOTE: The information provided in these forms will not be kept confidential.

Category Budget Attachment 7Task Budget Attachment 7Direct Labor Attachment 7Fringe Benefits Attachment 7

Travel Attachment 7Equipment Attachment 7

Materials & Miscellaneous Attachment 7

Subcontracts Attachment 7

Indirect Costs and Profit Attachment 7



9. Commitment and Support Letter Form (Attachment 9)A commitment letter commits an entity or individual to providing the service or funding described in the letter. A support letter details an entity or individual’s support for the project. Commitment and Support Letters must be submitted with the application. Letters that are not submitted by the application deadline will not be reviewed and counted towards meeting the requirement specified in the solicitation.

a) Commitment Letters

Match funding is not required. However, if match funding will be provided, applicants must submit a match funding commitment letter signed by each representative of the entity or individual that is committing to providing match funding. The letter must: (1) identify the source(s) of the funds; and (2) guarantee the availability of the funds for the project.

b) Support LettersAll applicants must include at least one support letter from a project stakeholder (i.e., an entity or individual that will benefit from or be involved in the project) that: (1) describes the stakeholder’s interest or involvement in the project; (2) indicates the extent to which the project has the support of the relevant industry and/or organizations; and (3) describes any support it intends (but does not necessarily commit) to provide for the project, such as funding or the provision of a pilot demonstration or deployment site.



IV. Evaluation Process and Criteria

ABOUT THIS SECTIONThis section explains how the proposals will be evaluated. It describes the evaluation stages, preference points, and scoring of all proposals.

PROPOSAL EVALUATIONA Bidder’s proposal will be evaluated and scored based on their response to the information requested in this RFP. The entire evaluation process from receipt of proposals to posting of the Notice of Proposed Award is confidential.

To evaluate all Proposals, the Energy Commission will organize an Evaluation Committee. The Evaluation Committee may consist of Energy Commission staff or staff of other California state entities.

The Proposals will be evaluated in two stages:

Stage One: Administrative and Completeness ScreeningThe Contracts Office will review Proposals for compliance with administrative requirements and completeness. Proposals that fail Stage One shall be disqualified and eliminated from further evaluation.

Stage Two: Technical and Cost Evaluation of ProposalsProposals passing Stage One will be submitted to the Evaluation Committee to review and score based on the Evaluation Criteria in this solicitation.

A minimum score of 70 points is required for the Proposal to be eligible for funding. In addition, the Proposal must receive a score of at least 32 points for criteria 1−2 and 60 points for criteria 1-6 to be eligible for funding.

During the evaluation and selection process, the Evaluation Committee may schedule a clarification interview with a Bidder. The clarification interview will either be held by telephone or in person at the Energy Commission for the purpose of clarification and verification of information provided in the proposal. However, these interviews may not be used to change or add to the contents of the original Proposal.

The total score for each Proposal will be the average of the combined scores of all Evaluation Committee members.

After scoring is completed, proposals not attaining a score of 70 percent of the total possible points for criteria 1 through 2 (32 of the 45 total points) and total possible points through criteria 6 (60 of the 85 total points) will be eliminated from further competition.

All applicable Preferences will be applied to all proposals attaining a minimum of 70 percent of the total possible points (70 of the 100 total points). The contract shall be awarded to the responsible Bidder, meeting the requirements outlined above, who achieves the highest score including applicable preference points.



SCORING SCALEUsing this Scoring Scale, the Evaluation Committee will give a score for each criterion described in the Evaluation Criteria Worksheet.

% of Possible Points

Interpretation Explanation for Percentage Points

0% Not ResponsiveResponse does not include or fails to address the requirements being scored. The omission(s), flaw(s), or defect(s) are significant and unacceptable.

10-30% Minimally Responsive

Response minimally addresses the requirements being scored. The omission(s), flaw(s), or defect(s) are significant and unacceptable.

40-60% Inadequate

Response addresses the requirements being scored, but there are one or more omissions, flaws, or defects or the requirements are addressed in such a limited way that it results in a low degree of confidence in the proposed solution.

70% AdequateResponse adequately addresses the requirements being scored. Any omission(s), flaw(s), or defect(s) are inconsequential and acceptable.

80% Good

Response fully addresses the requirements being scored with a good degree of confidence in the Bidder’s response or proposed solution. No identified omission(s), flaw(s), or defect(s). Any identified weaknesses are minimal, inconsequential, and acceptable.

90% Excellent

Response fully addresses the requirements being scored with a high degree of confidence in the Bidder’s response or proposed solution. Bidder offers one or more enhancing features, methods or approaches exceeding basic expectations.

100% Exceptional

All requirements are addressed with the highest degree of confidence in the Bidder’s response or proposed solution. The response exceeds the requirements in providing multiple enhancing features, a creative approach, or an exceptional solution.

NOTICE OF PROPOSED AWARDThe Commission will post a Notice of Proposed Award (NOPA) at the Commission’s headquarters in Sacramento, on the Commission’s Web Site, and will mail the NOPA to all parties that submitted a proposal.



Scoring Criteria Maximum Points

1. Technical Merit and Needa. Provide a short description of how the proposed project will advance,

supplement and frame current technological and scientific understanding and knowledge..

b. Include a comprehensive summary of the current status of renewable energy technologies, relevant data availability and knowledge of priority research worth further examining.

5

2. Technical ApproachThe proposal provides the following in response to each of the criteria listed below:

a. Describes the technique, approach, and methods to be used in providing the services listed in the Scope of Work, highlighting any outstanding features, qualifications and experience.

b. Describes how tasks will be executed and coordinated with various participants and team members.

c. Identifies and discusses factors critical for success, in addition to risks, barriers, and limitations. Provides a plan to address them.

d. Describes how the knowledge gained, literature review results, and lessons learned will be made available to the public and key decision-makers.

40

Total Possible Points for criteria 1- 2(Minimum Passing Score for criteria 1- 2 is 32)

45

3. Team Qualifications, Capabilities, and Resourcesa. Describes the organizational structure of the Bidder and the project

team. Include an organizational chart that illustrates the structure.

b. Identifies key team members, including the project manager and principal investigator.

c. Provide a current resume for all team members listed, including job classification, relevant experience, education, academic degrees and professional licenses.

d. Provides detailed estimates of hours for each task for each team member.

e. Explains how the various tasks will be managed and coordinated, and how the project manager’s technical expertise will support the effective management and coordination of all activities described in the Scope of Work.

f. Describes the facilities, infrastructure, and resources available to the team.

g. Describes the team’s history of successfully completing projects.

h. References are provided as required and are current, meaning within the

15




past three years (include this information in the Client References Form Attachment). References will be checked and scored accordingly.

i. Identifies any collaboration with utilities, industries, or others. Explain the nature of the collaboration and what each collaborator will contribute.

j. Demonstrates that the Bidder has the financial ability to complete the project, as indicated by the responses to the following questions:

Has your organization been involved in a lawsuit or government investigation within the past ten years?

Does your organization have overdue taxes? Has your organization ever filed for or does it plan to file for

bankruptcy? Has any party that entered into an contract with your organization

terminated it, and if so for what reason? For Energy Commission agreements or contracts listed in the

Proposal that were executed (i.e., approved at a Commission business meeting and signed by both parties) within the past five years, has your organization ever failed to provide a final report by the date indicated in the agreement or contract?

4. Previous Work ProductsEach Bidder shall provide at least one example of a similar work or academic research product, for the services to be provided as described in the RFP. If subcontractors will be providing technical support in a task area, each subcontractor shall also submit one example of a work or academic product that demonstrates experience in potential work assignments described in this RFP.

Where appropriate work or academic products should describe in detail and highlight the Bidder’s ability to support tasks identified in this RFP including equations, data analysis methods and strategies, data schema, and diagrams.

It is not necessary to provide more than one copy of each work product example. Web links are acceptable.

5

5. Budget and Cost-Effectivenessa. Justifies the reasonableness of costs for direct labor, non-labor (e.g.,

indirect overhead, general and administrative costs, and profit), and operating expenses by task.

b. Justifies why the hours proposed for personnel and subcontractors are reasonable to accomplish the activities in the Scope of Work.

c. Explains how the bidder will maximize funds for the technical tasks in the Scope of Work and minimize expenditure of funds for program administration and overhead.

d. Ratio of direct labor and fringe benefits to loaded rates is reasonable. (This will be based on the formula in the Direct Labor tab of Attachment 7 Budget Forms. The closer it is to 1, the higher the amount of points will be provided.)

10




COST CRITERIA6. EPIC Funds Spent in CaliforniaProjects that spend EPIC funds in California will receive points as indicated in the table below. “Spent in California” means that: (1) Funds under the “Direct Labor” category and all categories calculated based on direct labor in the Direct Labor tab are paid to individuals who pay California state income taxes on wages received for work performed under the contract; and (2) Business transactions (e.g., material and equipment purchases, leases, rentals, and contractual work) are entered into with a business located in California.

Airline ticket purchases and payments made to out-of-state workers are not considered funds “spent in California.” However, funds spent by out-of-state workers in California (e.g., hotel and food) are considered funds “spent in California.”

Percentage of EPIC funds spent in CA

Percentage of Possible Points

>60% 20%>70% 40%>80% 60%>90% 80%>100% 100%

10

Total Possible Points for Criteria 1-6(Minimum Passing Score is 60)

85

7. Cost Points. The Score for this criteria will be derived from the mathematical cost formula set forth below:

Lowest Bidder’s Cost Bid divided by Bidder’s Cost Bid = Bidder’s Percentage of Points

15

Total Possible Points 100

Minimum Passing Score (70%) 70

BIDDER’S TOTAL TECHNICAL SCORESmall/Micro Business PreferenceNon-Small Business PreferenceDisabled Veteran Business Enterprise IncentiveMatch Funding Preference 5

BIDDER’S FINAL SCORE



Cost Criteria

Lowest Cost Proposal = 100% of total possible points for this criteria

All other proposals get a lower percentage of the possible points based on how close their cost proposals are to the lowest cost proposal as follows:

Lowest Cost Proposal / Other Cost Proposal = Other Proposal % of Possible Points

Example: Proposal A Total Costs: $85,347; Proposal B Total Costs: $90,242; Proposal C Total Costs: $87,249.

Proposal A: Lowest Cost Proposal = 100% possible points

Proposal B: $85,347/$90,242 = 94.57% possible points

Proposal C: $85,347/$87,249= 97.82% possible points

Points Allocation (15 possible points):

Proposal A: 100% possible points = 15 points

Proposal B: 94.57% possible points = 14.19 points

Proposal C: 97.82% possible points = 14.67 points



V. Business Participation Programs and Match Funding (Preferences/Incentives)

PREFERENCE POINTSA Bidder may qualify for non-technical preference points described below. Each qualifying Bidder passing the minimum technical evaluation will receive the applicable preference points.

This section describes the following business participation programs: Disabled Veteran Business Enterprise Participation Compliance Requirements Small Business / Microbusiness Preference Non-Small Business Preference Target Area Contract Act Preference

DISABLED VETERAN BUSINESS ENTERPRISES (DVBE) COMPLIANCE REQUIREMENTS DVBE Participation RequiredThis RFP is subject to a mandatory certified DVBE participation of at least three percent (3%).

Two Methods to Meet DVBE Participation Requirement If Bidder is a DVBE, then Bidder has satisfied the participation requirements if it commits to

performing at least 3% of the contract with the Bidder’s firm, or in combination with other DVBE(s).

If Bidder is not a DVBE, Bidder can satisfy the requirement by committing to use certified DVBE subcontractors for at least 3% of the contract.

Required FormsBidders must complete Attachments 1, 3 and 4 to document DVBE participation. If Bidder does not include these forms, the Bid is considered non-responsive and shall be rejected. Contractor Status Form (Attachment 1).

Under the paragraph entitled: “Disabled Veteran Business Enterprise Participation Acknowledgement”, make sure to check the “yes” “DVBE Participation” box.

DVBE Declarations Std. Form 843 (Attachment 3) Bidder Declaration Form GSPD-05-105 (Attachment 4)

DVBE Definition For DVBE certification purposes, a "disabled veteran" is:

A veteran of the U.S. military, naval, or air service; The veteran must have a service-connected disability of at least 10% or more; and The veteran must be domiciled in California.

DVBE Certification and Eligibility To be certified as a DVBE, your firm must meet the following requirements:

o Your business must be at least 51% owned by one or more disabled veterans; o Your daily business operations must be managed and controlled by one or more

disabled veterans o The disabled veterans who exercise management and control are not required to be

the same disabled veterans as the owners of the business; and

o Your home office must be located in the U.S. (the home office cannot be a branch or subsidiary of a foreign corporation, foreign firm, or other foreign based business).



DVBE limited liability companies must be wholly owned by one or more disabled veterans. Each DVBE firm listed on the DVBE Declarations Std. form 843 (Attachment 3) and on the

Bidder Declaration form GSPD-05-105 (Attachment 4) must be formally certified as a DVBE by the Office of Small Business and DVBE Services (OSDS). The DVBE program is not a self-certification program. Bidder must have submitted application to OSDS for DVBE certification by the Bid due date to be counted in meeting participation requirements.

Printing / Copying Services Not EligibleDVBE subcontractors cannot provide printing/copying services. For more information, see section VI Administration, which states that printing services are not allowed in proposals.

To Find Certified DVBEsAccess the list of all certified DVBEs by using the Department of General Services, Procurement Division (DGS-PD), online certified firm database at http://www.bidsync.com/DPXBisCASB. Search by “Keywords” or “United Nations Standard Products and Services Codes” (UNSPSC) that apply to the elements of work you want to subcontract to a DVBE. Check for subcontractor ads that may be placed on the California State Contracts Register (CSCR) for this solicitation prior to the closing date. You may access the CSCR at: http://www.bidsync.com/DPX?ac=powersearch&srchoid_override=307818. For questions regarding the online certified firm database and the CSCR, please call the OSDS at (916) 375-4940 or send an email to: [email protected].

Commercially Useful FunctionDVBEs must perform a commercially useful function relevant to this solicitation, in order to satisfy the DVBE program requirements. California Code of Regulations, Title 2, Section 1896.62(l) provides:“Commercially Useful Function (CUF) means a DVBE contractor or subcontractor that contributes to the fulfillment of contract requirements as determined by awarding departments in § 1896.71, and does all of, but is not limited to, the following:(1) Is responsible for the execution of a distinct element of work for the contract; (2) Carries out contractual obligations by actually performing, managing, or supervising the work involved; (3) Performs work that is normal for its business services and functions; (4) Is not further subcontracting a portion of the work that is greater than expected to be subcontracted by normal industry practices; (5) Is responsible, with respect to products, inventories, materials, and supplies required for the contract, for negotiating price, determining quality and quantity, ordering, installing, if applicable, and making payment; and, (6) Its role is not an extra participant in the transaction, contract or project through which funds are passed in order to obtain the appearance of DVBE participation.”

Information VerifiedInformation submitted by the Bidder to comply with this solicitation’s DVBE requirements will be verified. If evidence of an alleged violation is found during the verification process, the State shall initiate an investigation, in accordance with the requirements of PCC Section 10115, et seq., and Military & Veterans Code Section 999 et seq., and follow the investigatory procedures required by California Code of Regulations Title 2, Section 1896.90 et. seq. Contractors found to be in violation of certain provisions may be subject to loss of certification, sanctions and/or contract termination.



DVBE ReportUpon completion of the contract for which a commitment to achieve DVBE participation was made, the contractor that entered into a subcontract with a DVBE must certify in a report to the Energy Commission: 1) the total amount the prime contractor received under the contract; 2) the name and address of the DVBE(s) that participated in the performance of the contract; 3) the amount each DVBE received from the prime contractor; 4) that all payments under the contract have been made to the DVBE(s); and 5) the actual percentage of DVBE participation that was achieved. A person or entity that knowingly provides false information shall be subject to a civil penalty for each violation. Military & Veterans Code Section 999.5(d).

The Office of Small Business and DVBE Services (OSDS)OSDS offers program information and may be reached at:Department of General ServicesOffice of Small Business and DVBE Services707 3rd Street, 1st Floor, Room 400West Sacramento, CA 95605http://www.dgs.ca.gov/pd/Programs/OSDS.aspxPhone: (916) 375-4940 Fax: (916) 375-4950E-mail: [email protected]

DVBE Law Public Contract Code Section 10115 et seq.

Military & Veterans Code Section 999 et. seq.

California Code of Regulations Title 2, Section 1896.60 et. seq.

DVBE INCENTIVEThe information below explains how the incentive is applied and how much of an incentive will be given.

Incentive ApplicationAward Based on High Point: The Incentive is applied by adding the incentive points to the Proposal for Bidders that include more than the minimum required 3.00% DVBE participation. In other words, if a Bidder includes 3.01% DVBE participation or greater, it will receive the DVBE incentive. If you include 3% DVBE participation, you will not receive the incentive. You will only receive the incentive, if you include 3.01% or greater DVBE participation. Incentive points cannot be used to achieve any applicable minimum point requirements. The DVBE incentive is only applied during the Proposal evaluation process and only to responsive proposals from responsible Bidders.

Proposed DVBE Participation Level DVBE Incentive Points3% 0 points

3.01% to 3.99% 1 point4% to 4.99% 2 points5% or over 3 points

Required Forms:

Contractor Status Form (Attachment 1).



mailto:[email protected]

Under the paragraph entitled: “Disabled Veteran Business Enterprise Participation Acknowledgement”, make sure to check the “yes” “DVBE Incentive Participation” box.

DVBE Declarations Std. Form 843 (Attachment 3) Bidder Declaration Form GSPD-05-105 (Attachment 4)

DVBE Incentive Law Military & Veterans Code Section 999.5(a) California Code of Regulations Title 2, Section 1896.99.100 et.seq.

SMALL BUSINESS / MICROBUSINESS / NON-SMALL BUSINESSSmall Business / MicrobusinessPreferenceBidders who qualify as a State of California certified small business will receive five percent (5%) preference points based on the highest responsible bidder's total score, if the highest scored proposal is submitted by a business other than a certified small business. Bidders qualifying for this preference must submit a copy of their Small Business Certification and document their status in Attachment 1, Contractor Status Form.

Required Forms Submit a copy of your Small Business Certification Contractor Status Form (Attachment 1) Complete the “Small Business Preference Claim” section

Bidder Declaration Form GSPD-05-105 (Attachment 4)

CertificationA business must be formally certified by the Department of General Services, OSDS, in order to receive the small/microbusiness preference.

Non Profit Veteran Service AgencyBidders that qualify as a Non Profit Veteran Service Agency can be certified as a small business and are entitled to the same benefits as a small business.

Definitions Small business means a business certified by the OSDS in which:

(1) It is independently owned and operated; and

(2) The principal office is located in California; and

(3) The officers of the business in the case of a corporation; officers and/or managers, or in the absence of officers and/or managers, all members in the case of a limited liability company; or the owner(s) in all other cases, are domiciled in California; and

(4) It is not dominant in its field of operation(s), and

(5) It is either:

(A) A business that, together with all affiliates, has 100 or fewer employees, and annual gross receipts of fourteen million dollars ($14,000,000) or less as averaged for the previous three tax years, as adjusted by the Department pursuant to Government Code § 14837(d)(3); or



(B) A manufacturer as defined herein that, together with all affiliates, has 100 or fewer employees.

Microbusiness means a small business certified by OSDS, which meets all of the qualifying criteria as a small business, and is:

(1) A business that, together with all affiliates, has annual gross receipts of three million, five hundred thousand dollars ($3,500,000) or less as averaged for the previous three tax years, as adjusted by the Department pursuant to Government Code §14837(d)(3); or

(2) A manufacturer as defined herein that, together with all affiliates, has 25 or fewer employees.

Non Profit Veteran Service Agency means an entity that:

(1) Is a community-based organization,

(2) Is a nonprofit corporation (under Section 501(c)(3) of the Internal Revenue Code), and

(3) Provides housing, substance abuse, case management, and employment training services (as its principal purpose) for:

o low income veterans, o disabled veterans, or o homeless veterans o and their families

Commercially Useful Function A certified small business or microbusiness shall provide goods or services that contribute to the fulfillment of the contract requirements by performing a “commercially useful function” defined as follows:

(1) The contractor or subcontractor is responsible for the execution of a distinct element of the work of the contract; carrying out its obligation by actually performing, managing or supervising the work involved; and performing work that is normal for its business services and functions;

(2) The contractor or subcontractor is not further subcontracting a greater portion of the work than would be expected by normal industry practices;

(3) The contractor or subcontractor is responsible, with respect to materials and supplies provided on the subcontract, for negotiating price, determining quality and quantity, ordering the material, installing (when applicable), and paying for the material itself;

(4) A contractor or subcontractor will not be considered as performing a commercially useful function if its role is limited to that of an extra participant in a transaction, contract, or project through which funds are passed in order to achieve the appearance of small business participation.

Late Payment of InvoicesCertified small/microbusinesses are entitled to greater interest penalties paid by the state for late payment of invoices than for non-certified small business/microbusiness.

Small Business / Microbusiness Law Government Code section 14835 et. seq. California Code of Regulations, Title 2 Section 1896 et. seq.



http://www.irs.gov/charities/charitable/article/0,,id=96099,00.html

NON-SMALL BUSINESSPreferenceThe preference to a non-small business bidder that commits to small business or micro-business subcontractor participation of twenty-five percent (25%) of its net bid price shall be five percent (5%) of the highest responsive, responsible bidder’s total score. A non-small business that qualifies for this preference, may not take an award away from a certified small business.

Required Forms Submit a copy of the subcontractor’s Small Business Certification Contractor Status Form (Attachment 1) Complete the “Small Business/Non-Small Business Preference Claim” section

Bidder Declaration Form GSPD-05-105 (Attachment 4)CertificationA subcontractor business must be formally certified by the Department of General Services, Office of Small Business and DVBE Services (OSDS), in order to receive the Non-Small Business Preference.

Non-Small Business Law Government Code section 14838 (b) California Code of Regulations, Title 2 Section 1896 et. seq.

TARGET AREA CONTRACT PREFERENCE ACT (TACPA)The Target Area Contract Preference Act (Government Code Section 4530 et seq.) will be granted for this solicitation. The TACPA provides five percent (5%) preference points to California-based companies that perform state contract work in a distressed area. Bidders wishing to take advantage of this preference will need to review the website stated below and submit the appropriate response with their Bid.

The TACPA program was established to stimulate economic growth and employment opportunities in designated Areas throughout the state of California. (GC4530)

The Department of General Services (DGS), Procurement Division (PD), Dispute Resolution Unit (DRU) oversees the TACPA program and evaluates all TACPA applications.

TACPA preference request forms can be accessed through the link below. Please carefully review the forms and requirements. Bidders are not required to apply for these preferences. Denial of the TACPA preference request is not a basis for rejection of the bid.

The State as part of its evaluation process reserves the right to verify, validate, and clarify all information contained in the bid. This may include, but is not limited to, information from bidders, subcontractors and any other sources available at the time of the bid evaluation. Bidder refusal to agree to and/or comply with these terms, or failure to provide additional supporting information at the State's request may result in denial of preference requested.

Contracts awarded with applied preferences will be monitored throughout the life of the contract for compliance with statutory, regulatory, and contractual requirements. The State will take appropriate corrective action and apply sanctions as necessary to enforce preference programs.

Any questions regarding the TACPA preference should be directed to the Department of General Services, Procurement Division at (916) 375-4609.



TACPA Preference Request (STD 830):

http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std830.pdf

Bidder’s Summary of Contract Activities and Labor Hours: http://www.documents.dgs.ca.gov/pd/edip/bidsum526.pdf

MATCH FUNDINGBidders will receive up to 5 preference points based on the criteria below:

Each match funding contributor must submit a commitment letter that meets the requirements of Attachment 9. Failure to meet these requirements will disqualify the proposal from consideration for match funding points.

Up to 3 points for this criterion will be awarded based on the percentage of match funds relative to the EPIC funds requested. This ratio will be multiplied by 3 to yield the points.

The remaining 2 points for this criterion will be based on the level of commitment, dollar value justification, and funding replacement strategy described in the match funding commitment letter (see Attachment 9). The proposal scoring scale in this solicitation will be used to rate these criteria.

All bidders providing match funds must submit commitment letters that: (1) identify the source(s) of the funds; (2) justify the dollar value claimed; (3) provide an unqualified (i.e., without reservation or limitation) commitment that guarantees the availability of the funds for the project; and (4) provide a strategy for replacing the funds if they are significantly reduced or lost. Please see Attachment 9, Commitment and Support Letter Form. Letters failing to meet these criteria will not be considered for preference points.



http://www.documents.dgs.ca.gov/pd/edip/bidsum526.pdf

http://www.documents.dgs.ca.gov/dgs/fmc/pdf/std830.pdf

VI. Administration

RFP DEFINEDThe competitive method used for this procurement of services is a Request for Proposal (RFP). A Proposal submitted in response to this RFP will be scored and ranked based on the Evaluation Criteria. Every Proposal must establish in writing the Bidder’s ability to perform the RFP tasks.

DEFINITION OF KEY WORDSImportant definitions for this RFP are presented below:

Word/Term DefinitionBidder Respondent to this RFP

CAM Commission Agreement Manager

DGS Department of General Services

DVBE Disabled Veteran Business Enterprises

Energy Commission California Energy Commission

Proposal Formal written response to this document from Bidder

RFP Request for Proposal, this entire document

State State of California

COST OF DEVELOPING PROPOSALThe Bidder is responsible for the cost of developing a Proposal, and this cost cannot be charged to the State.

SOFTWARE APPLICATION DEVELOPMENTIf this scope of work includes any software application development, including but not limited to databases, websites, models, or modeling tools, contractor shall utilize the following standard Application Architecture components in compatible versions:

Microsoft ASP.NET framework (version 3.5 and up) Recommend 4.0 Microsoft Internet Information Services (IIS), (version 6 and up) Recommend 7.5 Visual Studio.NET (version 2008 and up) Recommend 2010 C# Programming Language with Presentation (UI), Business Object and Data Layers SQL (Structured Query Language) Microsoft SQL Server 2008, Stored Procedures Recommend 2008 R2 Microsoft SQL Reporting Services Recommend 2008 R2 XML (external interfaces)

Any exceptions to the Electronic File Format requirements above must be approved in writing by the Energy Commission Information Technology Services Branch.



PRINTING SERVICESPer Management Memo 07-06, State Agencies must procure printing services through the Office of State Publishing (OSP). Bidders shall not include printing services in their proposals.

CONFIDENTIAL INFORMATIONThe Commission will not accept or retain any Proposals that have any portion marked confidential.

DARFUR CONTRACTING ACT OF 2008Effective January 1, 2009, all solicitations must address the requirements of the Darfur Contracting Act of 2008 (Act). (Public Contract Code sections 10475, et seq.; Stats. 2008, Ch. 272). The Act was passed by the California Legislature and signed into law by the Governor to preclude State agencies generally from contracting with “scrutinized” companies that do business in the African nation of Sudan (of which the Darfur region is a part), for the reasons described in Public Contract Code section 10475.

A scrutinized company is a company doing business in Sudan as defined in Public Contract Code section 10476. Scrutinized companies are ineligible to, and cannot, bid on or submit a proposal for a contract with a State agency for goods or services. (Public Contract Code section 10477(a)).

Therefore, Public Contract Code section 10478 (a) requires a company that currently has (or within the previous three years has had) business activities or other operations outside of the United States to certify that it is not a “scrutinized” company when it submits a bid or proposal to a State agency. (See # 1 on Attachment 2)

A scrutinized company may still, however, submit a bid or proposal for a contract with a State agency for goods or services if the company first obtains permission from the Department of General Services (DGS) according to the criteria set forth in Public Contract Code section 10477(b). (See # 2 on Attachment 2)

CALIFORNIA CIVIL RIGHTS LAWSPrior to bidding on, submitting a proposal or executing a contract or renewal for a State of California contract for goods or services of $100,000 or more, a bidder or proposer must certify that it is in compliance with the Unruh Civil Rights Act (Section 51 of the Civil Code) and the Fair Employment and Housing Act (Section 12960 of the Government Code). Additionally, if a vendor has an internal policy against a sovereign nation or peoples recognized by the United States government, the Contractor must certify that such policies are not used in violation of the Unruh Civil Rights Act (Section 51 of the Civil Code) or the Fair Employment and Housing Act (Section 12960 of the Government Code).

See Attachment 10.

RFP CANCELLATION AND AMENDMENTSIf it is in the State’s best interest, the Energy Commission reserves the right to do any of the following:

Cancel this RFP; Amend this RFP as needed; or Reject any or all Proposals received in response to this RFP



If the RFP is amended, the Energy Commission will send an addendum to all parties who requested the RFP and will also post it on the Energy Commission’s Web Site www.energy.ca.gov/contracts and Department of General Services’ Web Site http://www.bidsync.com/DPX?ac=powersearch&srchoid_override=307818.

ERRORSIf a Bidder discovers any ambiguity, conflict, discrepancy, omission, or other error in the RFP, the Bidder shall immediately notify the Energy Commission of such error in writing and request modification or clarification of the document. Modifications or clarifications will be given by written notice of all parties who requested the RFP, without divulging the source of the request for clarification. The Energy Commission shall not be responsible for failure to correct errors.

MODIFYING OR WITHDRAWAL OF PROPOSALA Bidder may, by letter to the Contact Agreement Officer at the Energy Commission, withdraw or modify a submitted Proposal before the deadline to submit proposals. Proposals cannot be changed after that date and time. A Proposal cannot be “timed” to expire on a specific date. For example, a statement such as the following is non-responsive to the RFP: “This proposal and the cost estimate are valid for 60 days.”

IMMATERIAL DEFECTThe Energy Commission may waive any immaterial defect or deviation contained in a Bidder’s proposal. The Energy Commission’s waiver shall in no way modify the proposal or excuse the successful Bidder from full compliance.

DISPOSITION OF BIDDER’S DOCUMENTSOn the NOPA posting date all proposals and related material submitted in response to this RFP become a part of the property of the State and public record. Bidders who want any work examples they submitted with their proposals returned to them shall make this request and provide either sufficient postage, or a Courier Charge Code to fund the cost of returning the examples.

GROUNDS TO REJECT A PROPOSALA Proposal shall be rejected if

It is received after the exact time and date set for receipt of Proposal’s pursuant to Public Contract Code, Section 10344.

It is considered non-responsive to the California Disabled Veteran Business Enterprise participation requirements.

It is lacking a properly executed Contractor Certification Clauses. It is lacking a properly executed Darfur Contracting Act Form. It is lacking a properly executed Iran Contracting Act Form. It is lacking a properly executed California Civil Rights Laws Certification It contains false or intentionally misleading statements or references which do not

support an attribute or condition contended by the Bidder. The Proposal is intended to erroneously and fallaciously mislead the State in its

evaluation of the Proposal and the attribute, condition, or capability is a requirement of this RFP.

There is a conflict of interest as contained in Public Contract Code Sections 10410-10412 and/or 10365.5.

It contains confidential information, or it contains any portion marked confidential.



http://www.bidsync.com/DPX?ac=powersearch&srchoid_override=307818

http://www.energy.ca.gov/contracts

The Bidder does not agree to the terms and conditions as attached to the solicitation either by not signing the Contractor Status Form or by stating anywhere in the bid that acceptance is based on modifications to those terms and conditions or separate terms and conditions.

A Proposal may be rejected if: It is not prepared in the mandatory format described. It is unsigned. The firm or individual has submitted multiple proposals for each task. It does not literally comply or contains caveats that conflict with the RFP and the

variation or deviation is not material, or it is otherwise non-responsive. The Bidder has previously completed a PIER agreement, received the PIER Royalty

Review letter, which the Commission annually sends out to remind past recipients of their obligations to pay royalties, and has not responded to the letter or is otherwise not in compliance with repaying royalties.

The budget forms are not filled out completely.

PROTEST PROCEDURESA Bidder may file a protest against the proposed awarding of a contract. Once a protest has been filed, contracts will not be awarded until either the protest is withdrawn, or the Commission cancels the RFP, or the Department of General Services (DGS) decides the matter.

Please note the following:

Protests are limited to the grounds contained in the California Public Contract Code Section 10345.

During the five working days that the NOPA is posted, protests must be filed with the DGS Legal Office and the Commission Contracts Office.

Within five calendar days after filing the protest, the protesting Bidder must file with the DGS and the Commission Contracts Office a full and complete written statement specifying the grounds for the protest.

If the protest is not withdrawn or the solicitation is not canceled, DGS will decide the matter. There may be a formal hearing conducted by a DGS hearing officer or there may be briefs prepared by the Bidder and the Commission for the DGS hearing officer consideration.

CONTRACT REQUIREMENTSThe content of this RFP shall be incorporated by reference into the final contract. See the Terms and Conditions located at: http://www.energy.ca.gov/research/contractors.html

No Contract Until Signed & ApprovedNo contract between the Energy Commission and the successful Bidder is in effect until the contract is signed by the Contractor, approved at an Energy Commission Business Meeting, and approved by the DGS, if required.

Contract AmendmentThe contract executed as a result of this RFP will be able to be amended by mutual consent of the Commission and the Contractor. The contract may require amendment as a result of project review, changes and additions, changes in project scope, or availability of funding.

