table of contents - analytics corpanalyticscorp.com/wp-content/uploads/2019/06/2019-2020...analytics...
TRANSCRIPT
TABLE OF CONTENTS
I. GENERAL INFORMATION
1. Introduction 3
2. Mailing/shipping address 3
3. Contact information 3
4. How to use this directory 4
5. Discount program 4
II. INDUSTRIAL HYGIENE SERVICES AND FEES
1. General information and Policies 5
1.1. Standard Turnaround Time 5
1.2. Shipping, Billing and Rush Multipliers 5
1.3. Discounts for Multiple Analytes on Single Media 6
1.4. Blanks and Charges 6
1.5. Method Development 6
1.6. Media 6
1.7. Sampling Instructions 7
1.8. Analytical Reports 9
1.9. No Charge Loaner Pump Program 10
1.10. Laboratory Test Request (Chain of Custody) 12
2. Industrial Hygiene Test Catalog 13
2.1. How to Use the Test Catalog 13
2.2. Alphabetical Listing of Test Methods 16
2.3. Profiles 107
2.4. Media Table 110
III. PHARMACEUTICAL TESTING SERVICES 117
1
IV. ENVIRONMENTAL SERVICES AND FEES 119
1. Introduction 119
2. Standard Turnaround Time 119
3. Billing and Rush Multipliers 119
4. Deliverable Multipliers 119
5. Certifications 119
6. Sample Containers/Shipping Kits 120
7. Sample Kit/Cooler Return Policy 120
8. Sample Kit/Cooler Temperatures 120
9. Sample Collection and Preservation Guidelines 120
10. How to Submit a Sample 121
11. Reports and Deliverables 122
12. Alphabetical Listing of Methods 125
V. MISCELLANEOUS SERVICES AND FEES 147
1. Introduction 147
2. Microbiology: Bacteria in Air 148
3. Microbiology: Bacteria in Water 148
4. Microbiology: Fungal 149
5. Air Quality Testing 150
VI. SERVICE GUIDE SUMMARY 150
1. Standard Terms and Conditions 150
2
I. General Information
1. IntroductionAnalytics has been a major supplier of industrial hygiene and environmental testing servicesto Fortune 500 companies, government agencies, and engineering firms since 1977. Thisexperience allows us to provide services that are both high in quality and cost effective.
Analytics is proud of the reputation we have earned over the last 30 years as a result ofproviding our customers the best quality analytical data available in the U.S. and more than30 countries abroad. We have over 1800 active clients and have done business with mostof them for over 10 years.
Analytics’ facility is one of the finest industrial hygiene and environmental laboratories in thecountry. We have in place the certifications, SOPs, insurance, and state-of-the art- instrumentation required to meet OSHA, NIOSH, and EPA analytical requirements.
Our standard turnaround time is 3 days for Industrial Hygiene samples, and 5 days forenvironmental samples. Analytics has no difficulty in meeting 24-hour turnaround time asmay be required.
2. Mailing/Shipping Addresses
Main Office & Laboratory
Analytics Corporation
10329 Stony Run Lane Ashland, VA 23005
800-888-8061 804-365-3000
804-365-3002 (Fax)
Remittance Address Analytics Corporation
PO Box 25249 Richmond, VA 23260
Website www.analyticscorp.com
Federal Tax ID #36-4359432 DUNS
#151052102
3. Contact Information
All personnel can be reached via our toll free number – 800-888-8061.
James McCarthy, President –5201 Jeffrey Spink, CEO – x5004
Andrew Teague, CIH, Industrial Hygiene Technical Laboratory Director – x5226 Dawn Casto, Environmental Technical Director – x5208
Jack Simila, Sales & No Charge Loaner Pumps – x5108 Customer Service – x0
3
4. How to Use This Directory
This directory has been designed so you can find individual industrial hygiene analytes alphabetically and within profiles. Environmental analytes are sorted alphabetically and by regulation. Pharmaceutical APIs and surrogates are sorted alphabetically.
The following information is included in the alphabetical listings:
Industrial Hygiene: Analyte, CAS #, Recommended Media, Suggested Volume, Sampling Rate, LOQ, Analytical Method, Analytical Technique, Lab Code, and Comments.
Environmental: Analyte, Method, Sample Container and Volume Requirements, Preservation, Holding Times, and Limits of Quantitation.
Pharmaceutical: Compound, Media, Reporting Limit, Method.
Please refer to the Data Deliverables Section at the end of both the IH and Environmental Services and Fees sections for a complete listing of our data package options. We can provide your data via fax, e-mail, or CD-ROM. Our data package turnaround time is contingent upon the data package level required.
5. Discount Program
Please note that all prices listed in this Directory of Services are our list/non-discounted prices. Client discounts may be available and are based on your annual volume of business. Please contact our Sales personnel to discuss volume related discounting.
4
II. Industrial Hygiene Services and Fees
1. General Information and Policies As you know, an industrial hygiene laboratory analyzes samples taken in the workplace environment. Since results of these analyses are used to determine the magnitude or presence of a problem in the workplace environment, it is vital that the laboratory analyzing the samples be proficient in producing high quality data on which important health decisions will be based. Our accreditation from AIHA is a mark of that capability. The AIHA accreditation shows that the laboratory has met defined standards for performance based on examination of a variety of criteria. When an IH laboratory is accredited by AIHA, it becomes part of a select group that have proven a high level of professional performance can be achieved and maintained.
1.1 Standard Turnaround Time
Analytics standard turnaround time for most industrial hygiene analyses is 3 business days from sample receipt at the laboratory. Faxed, e-mail, or verbal results are available by the close of business on the due date. A hard copy of the report will follow by mail.
1.2 Shipping, Billing and Rush Multipliers
Analytics will cover the cost of STANDARD OVERNIGHT FedEx return shipment to the laboratory of six (6) or more samples shipped within the United States. All other overnight delivery services charged on Analytics’ accounts will be billed at the courier’s published rate.
Clients may request monthly billing or individual invoices by sample group. Pricing is subject to change based on the current state of the economy. Billing by sample group is assumed unless otherwise requested. Billing terms are payable net 30. Acceptable forms
of payment include check, money order, wire transfer, VisaTM, MasterCardTM, DiscoverTM
or American ExpressTM.
Samples requiring rush or priority turnaround time must be scheduled prior to sample submission. The following charges will apply:
2 Day Turnaround Time 1.75 x price 1 Day Turnaround Time 2.00 x price Same Day Turnaround Time 3.00 x price Weekend Analysis 3.00 x price + $300 Holiday Analysis 3.00 x price + $300
5
1.3 Discounts for Multiple Analytes on Single Media
Analysis of multiple compatible analytes captured on one medium is available at a discounted fee. The higher priced analyte is billed at the published fee with additional analytes discounted as follows:
Organics by GC 50% of the published fee Inorganics by ICP 50% of the published fee Inorganics by ICP/MS 50% of the published fee Inorganics by GFAA 50% of the published fee Analytes by IC/HPLC 50% of the published fee
Other discounts may apply based on the volume and types of samples.
1.4 Blanks and Charges
Blanks act as a control for analysis by accounting for contamination that can occur during handling, storage or shipment of samples. Therefore, they are recommended as standard industrial hygiene practice. Please handle them the same as samples, but draw no air through them. Submit one blank with each sample group of 10 or less, two blanks with 11-20 samples, etc. (i.e., 10% blanks). Since blanks are analyzed as any other sample in the laboratory, they are priced according to the analysis requested. Additional support documentation, including instrument calibration, chromatograms, etc. is available at a preparation charge of 20% of the total analytical cost.
Analytics reserves the right to refuse to process any sample, which is deemed by the laboratory to be non-compliant with the quality assurance requirements. In such cases, client services will notify the client. If sample issues cannot be resolved, the client may be billed a sample-handling fee for costs incurred up to that point.
1.5 Method Development
Analytics has over 500 methods currently in service. It has always been our policy to develop new routine methods at no charge, assuming adequate demand. In addition, we can develop very specific/one of a kind methods for a standard fee plus expenses.
1.6 Media
Standard filter cassettes, sorbent tubes, specialized filters and tubes are supplied free if the samples are returned for analysis. Fees for organics are based on small charcoal tube analysis – there is an additional charge of $8.00 for large charcoal tubes. Diffusive (passive) monitor fees are not included in the analytical unit price and are billed at the time of shipment. Media can be shipped via ground service at no charge. A purchase order or credit card authorization may be required prior to the shipment of media. Media that has been supplied free and not returned for analysis to our laboratory after thirty days will be billed at current manufacturer published prices. See Section 2.4 - Media Table, which provides part numbers, descriptions and pricing for sampling media.
6
1.7 Sampling Instructions
The Analytics technical staff is available to discuss sampling strategies, sample requirements, and laboratory capabilities. Please direct inquiries through client services.
The volume of air to be collected for your samples is based on a number of factors, including:
• Threshold Limit Value (TLV) or Permissible Exposure Limit (PEL)
• Sensitivity of the analytical procedure
• Capacity of the collection device
• Concentration range to be measuredThe recommendations for air volumes, sampling rates and suggested media within this directory are provided for your convenience and are intended only as a guide to sample collection. With few exceptions, these air volumes enable the laboratory to report one-tenth of the TLV as the detection limit.
Fees for analyses of samples submitted on sorbent tubes include separate desorption, analysis, and reporting of both front and back sections.
Clearly label every tube, badge, vial, or sample container with your sample field number or your identification number. This number should also be printed on the chain of custody.
To facilitate testing and reporting, please type or clearly print all required information on the Laboratory Test Request/Chain of Custody (COC) form (an example immediately follows this section or our website www.analyticscorp.com). To initiate the COC, fill out and sign the appropriate sections designating time, date, and requested analysis. Submit the original with your samples and retain the copy for your records. The COC form should be submitted with each group of samples using a separate form for each sample type.
1.7.1 Solid Sorbent Tube Sampling Solid sorbent tubes include large and small charcoal tubes, porous polymer tubes such as XAD and XAD-7, large and small silica gel tubes, DNPH (dinitrophenyl hydrazine) tubes, Orbo tubes, Porapak Q, Tenax tubes, Firebrick tubes, Hydrar tubes and Florisil tubes. Sampling should be performed in the following manner:
1. Calibrate each pump at the recommended flow rate for the analyte of interest, using arepresentative solid-sorbent tube in-line. Calibrate each pump with a bubble meter orequivalent flow measuring device.
2. Break the ends of the solid sorbent tube immediately before sampling. The openingsshould be at least ½ of the internal diameter of the tube. Use a tube tip breaker or file.
3. Connect the solid sorbent tube to the tube holder, making sure the smaller sorbentsection (backup section) is nearest the pump. The air that is being sampled should notpass through any hose or tubing before entering the solid sorbent tube. To avoidchanneling and premature breakthrough, position the tube vertically during sampling.
4. Prepare field blanks by breaking the ends of tubes from the same lot as the tubes thatare being used for sampling. Handle the blanks in the same manner as the samples, but
7
do not draw air through the blanks. 5. Sample at an accurately known flow rate for the length of time necessary to obtain the
specified air volume. Check the pump periodically during sampling to detect any changes in flow rate. If the accurate measurement of volume cannot be determined due to inconsistent flow rates, discard the sample.
6. Be sure to keep an accurate record of sampling data including sample location, beginning and ending times of air sampling, temperature, relative humidity, atmospheric pressure or
7. elevation above sea level, and name of employee. 8. Seal the ends of the tubes with plastic caps immediately after sampling. Clearly label
each sample with an appropriate identification number. Label each blank tube as a blank.
9. Pack the tubes tightly for shipment to the laboratory, with adequate packing to minimize the possibility of breakage. Enclose a completed sample analytical request form (chain of custody) with each batch.
10. Bulk samples are recommended when sampling chemical mixtures such as fuel oil, kerosene, etc. When it is necessary to ship a bulk sample along with the air samples, the bulk sample must be shipped in a separate package to avoid possible cross contamination.
1.7.2 Sampling Using Filters Filters include glass fiber filters, Teflon filters, mixed cellulose ester membranes, polyvinyl chloride filters, and treated filters and pads.
Sampling with filters can be done open or closed faced. Open-faced sampling is done with three (3) piece cassettes with just the top of the cassette removed. Closed-faced sampling is performed with only the buttons removed from the cassette. Open-faced sampling is used in situations where even dispersal of the analyte over the filter is desired, such as in asbestos sampling or on certain coated filters such as for isocyanate sampling. Closed-faced sampling is performed in most cases of particulate sampling, which deposits the analyte near the center of the cassette.
Sampling should be performed in the following manner:
1. Calibrate the sampling pump at the recommended flow rate with a representative filter
in line using a bubble meter or equivalent flow measuring device.
2. Remove the cassette buttons (closed faced sampling) or cassette top (open faced sampling). Air being sampled should not pass through any hose or tubing before entering the cassette.
3. Attach the cassette to the sampling pump using flexible tubing or a cassette holder, making sure the filter pad end of the cassette is closest to the pump.
4. Prepare field blanks using cassettes from the same lot by briefly removing and replacing cassette buttons and handling these blanks in the same manner as the samples, without drawing air through the blanks.
5. Sample at a known flow rate for the length of time necessary to obtain the specified air volume, or until there is evidence of excessive filter loading. Check the pump during sampling to detect any changes in flow rate. If the accurate measurement of volume cannot be determined due to inconsistent flow rates, discard the sample.
6. Disconnect the filter after sampling. Replace the buttons (or top) and properly label the
8
sample and blanks. Be sure to keep an accurate record of sample data including sample location, beginning and ending times or air sampling, temperature, relative humidity, atmospheric pressure or elevation above sea level, and name of employee or area.
7. Ship the samples to the laboratory as soon as possible in a container designed to prevent damage in shipment. Enclose a completed chain of custody with each batch.
1.7.3 Sampling for Respirable Aerosols Respirable aerosol sampling is performed using a cyclone and filter sampler. Sampling for respirable aerosols should be performed in the same manner as sampling a filter except:
1. Calibrate each pump at the flow designated by the type of cyclone being used with a
representative cyclone and filter in line. Note that the filter is mounted upside down with the cyclone in place.
2. Inspect the interior of the cyclone. If there is visible scoring or damage inside, discard the cyclone since the dust separation characteristics may have been altered. Clean the interior of the cyclone.
3. Attach the cyclone to the filter according to the manufacturer’s instructions. Connect the assembly to the sampling pump. During sampling, make sure the cyclone hangs vertically and that the assembly does not get inverted during sampling. If an accurate and consistent flow rate cannot be maintained, discard the sample.
1.7.4 Sampling for Inhalable Aerosols We can provide pre-weighing of inhalable samplers, as well as post-weighing. Contact the laboratory for details on this relatively new technique.
1.8 Analytical Reports
Most clients have their data reported on our standard report, which includes total mass of analyte on each collector section, limits of quantitation, method reference and calculated air concentration. If you need additional data or would like a different format, please contact our customer service department at 800-888-8061, x0 and they will be able to assist you with your request. All laboratory reports, sample data and client proprietary information are held in confidence. Raw data for all analytical results will be retained for a period of 5 years. If data needs to be retained for a longer period, contact client services.
9
1.9 No Charge Loaner Pump Program
Analytics offers a No Charge Loaner Pump Program. This program will provide you with everything you need for air sampling analysis–pumps, sample media, all accessories, and instructions, custom packaged to your requirements, shipped to you as you need it. You pay only for shipping and, of course, the analysis – there is absolutely no cost to use the pumps and accessories.
To order your pumps, all you need to do is contact Jack Simila at 800-888-8061, x5108.
Your order will include the pumps (as many as you need, all fully charged and pre-calibrated), tubing, sample media, sample media holders, pumps, chargers, instructions, cyclones, splitters, low flow regulators, tube breaker, tool kit, chain of custody form and calibrated field rotameter, all packed in a sturdy carrying case. Pumps are normally sent out the same day. Please keep in mind the more notice you provide, the less expensive shipping charges will be. Typical shipping costs for a sampling set that includes five pumps and is shipped across the country (VA to CA) with 2nd day delivery is about $40.
We use primarily SKC AirCheck 52 sampling pumps, which handle flows in the range of 25 to 3000 ml/min with a backpressure of 25" water at 2 liters per minute. They weigh 20 ounces and have a timer, flow fault feature and NiCad or NiMH battery with a battery-check feature. Other pumps are available on request. The pumps arrive fully charged and calibrated versus a primary standard, with a record of calibration in the shipment. A field rotameter, calibrated against a primary standard, is included in the sampling kit. Post calibration can be performed and reported if you request it on your chain of custody when you return the samples and pumps.
The pumps and all accessories can be kept for the duration of your sampling project. As long as you are collecting and submitting for analysis daily samples, you may use the pumps indefinitely. If your project is postponed, you will need to call to confirm availability. Depending on the length of the time delay, you may need to return everything to us, but we will re-ship the entire sampling kit to you for your new scheduled date.
10
1.10 Laboratory Test Request (Chain of Custody)
Sample Custody is a set of procedures used to provide an accurate written record that can be used to trace the possession of a sample from the time of collection through its introduction into a data set. The Laboratory Test Request/Chain of Custody is used to record the transfer, possession, and custody of samples to ensure their integrity from collection through data reporting. Until you relinquish custody, you are responsible to ensure no one tampers with your samples. Custody is a critical part of the process because data reported without a complete and accurate chain of custody will not withstand legal challenge. The following items must be completed on the chain in order to ensure sample integrity and accurate analysis/reporting:
1. Date Shipping Samples
2. Total Number of Samples
3. Type of Media
4. Project Name or Number
5. PO or Release Number
6. Contact – Who the Report Will be Sent to
7. Telephone Number
8. Turnaround Time Required
9. Special Instructions, if needed
10. Where to fax/e-mail results
11. Sample ID or Sample Number
12. Sample Date
13. Sample volume
14. Analysis
15. Initiate COC
16. Laboratory Receipt Information (for laboratory use)
11
LABORATORY TEST REQUESTACCOUNT NUMBER, NAME AND ADDRESS
10329 Stony Run Lane
Ashland, VA 23005
(804) 365-3000
TOLL FREE (800) 888-8061
FAX (804) 365-3002
SAMPLE DATE
SIGN HERE TO INITIATE CHAIN OF CUSTODY
CARRIER IF "ANALYTICS COURIER" SIGN HERE DATE
PLEASE RETAIN A COPY FOR YOUR RECORDS
SIGNATURE(SAMPLE RECEIVING)
SIGNATURE(SAMPLE ADMINISTRATION)
SIGNATURE(LAB)
SIGNATURE(LAB)
SAMPLES RECEIVED BY: SAMPLES RELEASED BY:
SIGNATURE(SAMPLE RECEIVING)
SIGNATURE(SAMPLE ADMINISTRATION)
SIGNATURE(LAB)
SIGNATURE(LAB)
DATE/TIME CONDITION OF SAMPLE
PURCHASE ORDER NO.
DATE SHIPPED
* o SAME DAY
* o 1 DAY
* oCALL FOR AVAILABILITY
SPECIAL INSTRUCTIONS AND/OR UNUSUAL CONDITIONS:TURN AROUND TIME
CONTACT
CHAIN OF CUSTODY RECORD
FOR LABORATORY USE ONLY
SAMPLES HAVE VEEN SEALED FOR TRANSPORT AND
DELIVERED TO LABORATORY VIA:
ANALYSS REQUESTED - PLEASE USE SEPARATE
LABORATORY TEST REQUEST FOR EACH SAMPLE TYPE
o FAX RESULTS FAX NUMBER:
( ) __________________
o EMAIL RESULTS - EMAIL:________________________
SAMPLE # OR SAMPLE AREASAMPLE
VOLUME/LITERS
*o2 DAY
oSTANDARD
*EXTRA CHARGE
PROJECT NAME OR NUMBER
TELEPHONE NUMBER
# OF SAMPLES SAMPLE TYPE/MEDIA
V01 06.2017 Toll Free: 800-888-8061 Find more info at www.analyticscorp.com
12
2. Industrial Hygiene Test Catalog
2.1 How to Use the Test Catalog
This section is composed of several categories of information that allows the user to access the necessary parameters for industrial hygiene air sampling. The guide has been arranged to make it as easy as possible for the user. For many categories, abbreviations are used to facilitate a concise format. The following descriptions give the relevant information pertaining to each category in order of appearance in the guide.
Analyte & CAS# This category will give the name of the compound to be analyzed and the corresponding CAS#. In cases where there are other names for a compound, there may be a redirection to another place in the guide.
Recommended Media This category specifies the method recommended collection media for air sampling of the particular compound. Abbreviations used in this category are defined in the Section 2.4 Media Table.
Suggested Volume, L This category specifies the method recommended air volume to be sampled in liters. In many cases, this recommended volume can be at least doubled before breakthrough occurs. In high relative humidity locations or with very high volatile compounds, this recommended volume should not be exceeded.
Sampling Rate, LPM This sampling range indicates the minimum and maximum flow rate of the sampling pumps used in liters per minute.
LOQ (Limit of Quantitation) This category lists the lowest quantifiable sampling media loading (also known as Reporting Limit, RL) that will be reported (typically in micrograms) per sample. Samples measured below this loading will be reported as “<” values.
Method & Technique This category specifies the method used to analyze the compound listed in the test category. The “NIOSH” designation refers to methods described in the National Institute of Occupational Safety and Health Manual of Analytical Methods. The “OSHA” designation refers to methods described in the Occupational Safety and Health Administration Methods Manual. “SPM” designates a special method or an in-house method developed and validated by Analytics. An “M” in parentheses after the method designation refers to a modification of the method that has been validated by Analytics.
This category also gives abbreviations for the analytical technique and instrumentation used for the analysis of the compound listed in the test category.
13
Lab Code (Compatibility) This category gives the option to the user of sampling more than one compound on a specific sampling media. In order to do so, not only must the same sampling media be specified for each compound, but the Compatibility letter designations given in this category must match for each test compound to be sampled. Particular attention must be given to other parameters of the individual compounds such as sample volume and flow rate in order to ensure sample validity. Care must be taken to make sure that no flow rate or air volume parameter for an individual compound is exceeded when sampling for two or more compounds. The exception to the Lab Code list is NC, which means the analyte is not compatible with other compounds.
Due to the frequency of questions on substance compatibility (analytes or compounds that can be sampled on the same collection media), we have included a compatibility code in this edition of the sampling guide. Please see the “Lab Code” column in the list of individual air contaminants for information on individual analytes and compounds. Listed below is the compatibility code key. When two or more substances have the same Recommended Media and same the Lab Code, they can be sampled together and are eligible for a discounted price (see terms and conditions section for details).
Code A
Desorbing Solution Carbon disulfide (CS2)
Code AA
Desorbing Solution Sodium Thiosulfate
B C
CS2 + 1% 2-Butanol CS2 + 1% 2-Propanol
CC EE
Toluene OSHA ID125G Acid Digestion
D CS2 + 5% 2-Propanol FF 0.1N Potassium Hydroxide E Methylene Chloride + 5% HH Acetone
Methanol F CS2 + 1% Dimethylformamide II Methylene Chloride + 15%
Methanol H CS2 + 1% Methanol JJ 50% Methanol + 50% Water I Methylene Chloride KK 50% Isopropanol + 50%
Toluene J Water-soluble Metals Prep LL CS2 + 2% Acetone K Methanol MM Benzene M Ethanol NN Di-n-Butylamine
Derivatization N Acetonitrile OO Aqua Regia Acid digestion O Acetonitrile + 10%
Dimethylsulfoxide P Isooctane Q Methanol + 20% water NC Prep Not Compatible With
Additional Tests S Hexane T NIOSH 7300M Acid Digestion U Bicarbonate/carbonate Eluent V Sodium borate Eluent W Tetrahydrofuran X 0.01N Sodium Hydroxide Y Methanesulfonic Acid Eluent
14
2.2 Alphabetical Listing of Test Methods
Analytics is pleased to offer an extensive array of Industrial Hygiene analyses, including most OSHA, NIOSH, ASTM, and EPA methods and also numerous proprietary methods. Specific analytical tests are listed in the following sections. Lists of tests are presented in the Sections that follow here; Section 2.2 provides an alphabetical list by analyte, and Section 2.3 provides a listing of our profiles. Please note that for most tests Analytics does not require a minimum sample fee. Volume discounts are available depending on the annual volume or scope of your project. Please contact our sales department or your project manager for details.
15
Alphabetical Listing
of
Industrial Hygiene Tests
V01 06.2017 Toll Free: 800-888-8061 Find more info at www.analyticscorp.com 16
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Acenapthene
83-32-9 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Acenapthylene
208-96-8 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Acetaldehyde
75-07-0T-119
DNPH-Treated Silica Gel,
226-119
2 - 15 0.2 - 1.0 0.2EPA TO-11
HPLCN $116
Any ketone or aldehyde will react with the DNPH and is a
potential interference. Large concentrations of acetone or
MEK will compete with aldehyde and are therefore
potential negative interferences. Refrigerate media before
and after sampling and ship cold overnight. High ozone
level may necessitate ozone scrubber.
UMEX-100
SKC UMEX
Aldehyde PM 500-100
Up to 8 hours 0.0231 0.2EPA TO-11
HPLCN $116
Any ketone or aldehyde will react with the DNPH and is a
potential interference. Large concentrations of acetone or
MEK will compete with aldehyde and are therefore
potential negative interferences. Refrigerate media before
and after sampling and ship cold overnight. High ozone
level may necessitate ozone scrubber.
Acetic Acid
64-19-7T-01
Charcoal, 226-015 - 48 0.2 Max 5
OSHA ID 186SG M
ICV $69
Preferred method. Use PTFE prefilter (PN C-29) to remove
particulate acetates, if present. Particulate acetates can be
measured on filter, otherwise discard after sampling.
Formic Acid can also be determined but must be stored and
shipped cold overnight.
T-10-03
Prewashed Silica Gel,
226-10-03
1 - 24 0.05 - 0.2 5NIOSH 2011M
ICV $69
Use PTFE prefilter (PN C-29) to remove particulate acetates,
if present. Particulate acetates can be measured on filter,
otherwise discard after sampling. Formic Acid can also be
determined.
Acetic Anhydride
108-24-7
C-28
GFFs (2), amine-treated,
37mm, 4PC
TWA 15 Max
STEL 7.5 Max
0.050 Max
0.50 Max10
OSHA 102M
HPLC/UVKK $100
Open face sampling. Interference from ketene and acetyl
chloride. Limited shelf life media; store cold. Ship samples
cold overnight to the lab.
Acetoin
573-86-0 T-183
(2 in Series) Custom Silica
Gel, 226-183
TWA 9 Max
STEL 3 Max
0.050 Max
0.20 Max0.4
OSHA Method 1012
GC-ECDNC $110
Protect from light during sampling and storage (wrap with
foil). Store and ship samples cold. Ship overnight. May be
sampled on same tube with diacetyl. Filter built into tube
faces incoming air streams. Samples stable at least 17 days.
A three (3) sample minimum charge will be applied.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com17
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Acetone
67-64-1
T-01
Charcoal, 226-010.5 - 3 0.01 - 0.2 20
NIOSH 1300
GC/FIDA $56
O-91
Carbosieve S-III, Orbo 913 Max 0.05 Max 20
OSHA 69
GC/FIDF $56
M-3520
3M POVM 3520,
2-stage
2 Hours Max (at PEL) 0.0401 30NIOSH 1300M
GC/FIDA $56
Keep samples cold and expedite analysis for optimum
results.
M-02
SKC POVM, 575-0028 hours Max 0.0152 20
Proprietary,
IHGC-P029
GC/FID
A $77
T-09
Charcoal, 226-093 - 25 0.01 - 0.2 20
NIOSH 1606
GC/FIDII $56
M-01
SKC POVM, 575-00115 min - 8 hours 0.0224 10
NIOSH 1606M
GC/FIDII $56
M-3520
3M POVM 3520,
2-stage
2 Hours Max 0.0482 30NIOSH 1606M
GC/FIDII $56
Acetylene Tetrabromide
79-27-6 $-
See 1,1,2,2-Tetrabromoethane.
Acetylacetone
123-54-6
T-95
XAD-7, 226-95
TWA 24
STEL 3
TWA 0.05-0.1
CEIL 0.2 5
OSHA 7M
GC/FIDHH $77
Also known as 2,4-Pentandione.
Acid Mist (Inorganic Acid
Profile) See Inorganic Acid
Profile in Section 2.3
Profile includes Hydrobromic Acid, Hydrochloric Acid,
Hydrofluoric Acid, Nitric Acid, Phosphoric Acid, Sulfuric
Acid. Also see individual acids.
Acrolein
107-02-8T-119
DNPH-Treated Silica Gel,
226-119
2 - 30 0.2 - 1.0 0.25EPA TO-11M
HPLC/UVN $116
Result may be biased low due to instability of acrolein-
DNPH derivative. Any ketone or aldehyde will react with
the DNPH and is a potential interference. Large
concentrations of acetone or MEK will compete with
aldehyde and are therefore potential negative
interferences. Refrigerate media before and after sampling
and ship overnight.
T-117
HMP XAD-2,
226-117
TWA 48
STEL 3
TWA 0.1
STEL 0.2 1
OSHA 52
GC/NPDCC $102
Preferred method for compound stability. Not sensitive
enough to reach ACGIH TLV CEILING. Can also be analyzed
for formaldehyde. Store media cold be use.
UMEX-100
SKC UMEX Aldehyde
PM 500-100
Up to 8 hours 21.2 0.2EPA TO-11M
HPLC/UVN $116
Result may be biased low due to instability of acrolein-
DNPH derivative. Any ketone or aldehyde will react with
the DNPH and is a potential interference. Large
concentrations of acetone or MEK will compete with
aldehyde and are therefore potential negative
interferences. Refrigerate media before and after sampling
and ship overnight.
Acetonitrile
75-05-8
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com18
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Acrylamide
79-06-1
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0 0.40
Proprietary,
IHHPLC-P003
HPLC/UV
NC $160
Methylolacrylamide may also be tested along with
acrylamide.
T-57
GFF/XAD-7 OVS,
226-57
120 Max 1.0 Max 0.4OSHA PV2004
HPLC/UVNC $116
Acrylic Acid
79-10-7T-30-08 (2)
Anasorb 708, 226-30-08,
2 tubes in series
24 0.1 2OSHA PV2005
HPLC/UVK $116
Two identical tubes sampled in series. Low results due to
polymerization of acrylic acid on the sampling tube may
result from the presence of initiators collected. Methacrylic
acid may also be tested along with acrylic acid.
T-49-108
Chromosorb 108,
226-49-108
TWA 20
STEL 4.5
TWA 0.03-0.3
STEL 0.3 3
Proprietary,
IHHPLC-P005
HPLC/UV
JJ $160
Methacrylic acid can be collected and analyzed along with
acrylic acid using this sampling protocol (see lower
recommended sampling volume for methacrylic acid).
Acrylonitrile
107-13-1
T-01
Charcoal, 226-016 - 20 0.2 1
OSHA 37
GC/NPDHH $100
Preferred method.
M-3500
3M POVM, 350015 min - 8 hours 0.04 1.5
OSHA 37M
GC/NPDHH $100
M-02
SKC POVM, 575-002Up to 8 hours 0.0204 2.5
Proprietary,
IHGC-P029
GC/FID
A $77
T-81
Anasorb 747,
226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2 1.25
Proprietary,
IHGC-P029
GC/FID
A $77
Aldehyde Profile See
Aldehyde Profile in
Section 2.3
T-119
DNPH-Treated Silica Gel,
226-119
16 - 30 0.2 - 1Varies with
compound
EPA TO-11
HPLC/UVN $254
Profile includes Acetaldehyde, Acrolein, Butyraldehyde,
Formaldehyde, Glutaraldehyde, and Isovaleraldehyde. For
STEL sampling, collect a 15-minute sample at 1 LPM. Ozone
may interfere - use ozone scrubber in known ozone
contaminated areas. Any ketone or aldehyde will react with
the DNPH and is a potential interference. Large
concentrations of acetone or MEK will compete with the
aldehyde and are therefore potential negative
interferences. Refrigerate before and after sampling and
ship overnight. Media contains residual acetonitrile which
could interfere with acetonitrile monitoring.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com19
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Alkaline Dust
(as NaOH, KOH, other)
N/A
C-66
PTFE, 1um, 37mm, 2PC70 - 1000 1.0 - 4.0
40 NaOH,
56 KOH
NIOSH 7401
TitrationNC $69
This test provides a single cumulative measure of all
alkaline aerosols present in the exposure; e.g., sodium
hydroxide, potassium hydroxide, sodium bicarbonate,
calcium carbonate, etc. The acid-base titration test is not
compound-specific, but the result will be expressed in
terms of the alkaline compound identified on the test
request form. Acid compounds present in the sampling
environment will be negative interferences in the
measurement.
T-01
Charcoal, 226-014 - 50 0.01 - 0.2 5
NIOSH 1402
GC/FIDD $56
Also known as 2-Propenol.
M-3500
3M POVM, 3500Up to 8 hours 0.0404 7.5
NIOSH 1402M
GC/FIDI $56
Also known as 2-Propenol.
Allyl Chloride
107-05-1
T-01
Charcoal, 226-0116-100 0.01 - 1 5
NIOSH 1000
GC/FIDMM $77
Allyl Chloroformate
2937-50-0
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2 5
AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77
Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Allyl Methacrylate
96-05-9
T-81
Anasorb 747,
226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2 1.3
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min 0.012 2.6
Proprietary,
IHGC-P029
GC/FID
A $77
Aluminum
(metal dust and fume)
7429-90-5C-05
MCEF, 37mm, 0.8um, 3PC50 - 1000 1.0 - 3.0 2
NIOSH 7300M
ICP-OEST $40
Also see Welding Fume Profile. This analysis method is not
sufficient for analysis of the alpha-alumina form of
aluminum oxide which is commonly used in abrasives and
refractory materials (also known as corundum).
Ammonia
7664-41-7
T-10-06
H2SO4-Treated Silica Gel,
226-10-06
7.5 - 96 0.2 Max 2.5 NIOSH 6016 IC NC $69
Capacity reduced at high humidity. Prefilter (C-50) required
in presence of ammonium salt particulates.
T-29
Anasorb 747,
226-29
7 - 24 0.1 - 0.5 5.0
OSHA ID 188/
NIOSH 6015M
IC
NC $69
Sampling per OSHA ID188, analysis by NIOSH 6015M.
Capacity reduced at low humidity. Prefilter (C-50) required
in presence of ammonium salt particulates.
M-N584
Assay Ammonia PM,
AT N584
TWA Up to 8 hours
STEL 15 minutes0.0288 2.5
NIOSH 6016M
ICNC $69
Ship at ambient temperature to arrive at lab within 2 days.
Must be received by lab within 2 weeks of sampling. Store
unused samplers in refrigeration for maximum shelf life.
Ammonium Chloride
12125-02-9C-05
MCEF, 37mm, 0.8um, 3PC960 Max 2 Max 10
OSHA ID188M
ICNC $69
Sampling is for particulate ammonium salts, with analysis
for ammonium ion; ammonium chloride equivalent is
determined by calculation.
Allyl Alcohol
107-18-6
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com20
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Ammonium Persulfate, as
Persulfate
7727-54-0C-10
PVC, 37mm, 5um, 3PC
TWA 480-960
STEL 60
TWA 1-4
STEL 4 2.7
NIOSH 6016M
ICNC $69
When submitting samples, “Ammonium Persulfate, AS
PERSULFATE” needs to be specified on the Analysis Request
Form in order to have results reported correctly as
persulfate. Analysis is for ammonium ion with “ammonium
persulfate, as persulfate” determined by calculation.
n-Amyl Acetate
628-63-7
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1450
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0260 30
NIOSH 1450M
GC/FIDA $56
M-01
SKC POVM, 575-01Up to 8 hours 0.0118 40
NIOSH 1450M
GC/FIDA $56
sec-Amyl Acetate
626-38-0
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1450
GC/FIDA $56
n-Amyl Alcohol
71-41-0
T-09
Charcoal, 226-093 - 48 0.05 - 0.2 3.3
OSHA 7
GC/FIDA $56
t-Amyl Methyl Ether
994-05-8
T-09
(2 in series) Charcoal,
226-09
96 Max 0.1-0.2 20NIOSH 1615M
GC/FIDA $56
Aniline
62-53-3
T-10
Silica Gel, 226-105 - 30 0.02 - 0.2 10
NIOSH 2002
GC/FIDM $56
C-15
GFFs (2), H2SO4-treated,
37mm, 3PC
5 - 50 0.1 - 0.2 20NIOSH 2017
GC/FIDM $102
This arrangement allows for collection of o-toluidine on the
same cassette, and a silica gel tube (226-15) may be
included downstream of the cassette to trap and include
nitro benzene in the analysis.
Anthracene
120-12-7 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Antimony and Compounds,
as Sb
7440-36-0
C-05
MCEF, 37mm, 0.8um, 3PC40 - 1000 1.0 - 3.0 2.0
OSHA ID 125
ICPEE $40
Also See Welding Fume Profile
Antimony - ICP-MS
7440-36-0C-05
MCEF, 37mm, 0.8um, 3PC2000 Max 1 - 4 0.05
NIOSH 7300M
ICP-MST $51
Antimony Trioxide,
as Sb
1309-64-4
C-05
MCEF, 37mm, 0.8um, 3PC240 0.5-3.0 1
OSHA ID-125
ICPEE $40
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com21
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Aromatic 100
N/A T-01
Charcoal, 226-01
TWA 5-20
STEL 3
TWA 0.01-0.2
STEL 0.2 50
NIOSH 1550
GC/FIDA $77
Ship 5 ml pure distillate in separate shipment for reference,
and note separate shipment of the bulk sample on the test
request form. Also known as High Flash Aromatic Naphtha.
Aromatic 150
N/AT-01
Charcoal, 226-01
TWA 5-20
STEL 3 0.01-0.2 50
NIOSH 1550
GC/FIDA $77
Ship 5 ml pure distillate in separate shipment for reference,
and note separate shipment of the bulk sample on the test
request form.
Aromatic 200
N/AT-01
Charcoal, 226-01
TWA 5-20
STEL 3 0.01-0.2 50
NIOSH 1550
GC/FIDA $77
Ship 5 ml pure distillate in separate shipment for reference,
and note separate shipment of the bulk sample on the test
request form.
Arsenic
7440-38-2C-05
MCEF, 37mm, 0.8um, 3PC800 - 1000 1.0 - 3.0 2
NIOSH 7300
ICPT $40
C-05
MCEF, 37mm, 0.8um, 3PC50 - 1000 1.0 - 3.0 0.05
NIOSH 7300M
ICP/MST $46
Arsenic Trioxide
(as Arsenic)
1327-53-3
C-18
MCEF/Treated Backup,
37mm, 3PC
30 - 1000 1.0 - 3.0 0.05OSHA ID105M
GFAANC $51
Particulate arsenic collects on the MCE filter, and arsenic
trioxide vapor collects on the treated pad. Particulate
arsenic may be tested from the MCE filter if needed.
C-18
MCEF/Treated Backup,
37mm, 3PC
30 - 1000 1.0 - 3.0 0.05OSHA ID105M
ICP-MSNC $51
Particulate arsenic collects on the MCE filter, and arsenic
trioxide vapor collects on the treated pad. Particulate
arsenic may be tested from the MCE filter if needed.
Arsine
(as Arsenic)
7784-42-1 T-01
Charcoal, 226-0110 Max 0.2 Max 0.01
NIOSH 6001M
GFAANC $51
Precede tube with arsenic trioxide cassette (see above) if
particulate arsenic and/or arsenic trioxide are present. This
treated filter/tube train can be tested for particulate
arsenic, arsenic trioxide vapor, and arsine if needed.
Samples are stable for at least 6 days at ambient
temperature.
T-09
Charcoal, 226-09120 - 240 0.5 Max 0.04
NIOSH 6001M
GFAANC $51
If particulate arsenic is present, precede tube with arsenic
trioxide cassette (see above) to trap particulate arsenic and
arsenic trioxide. This treated filter/tube train can be tested
for particulate arsenic, arsenic trioxide vapor, and arsine if
needed. The recommended sampling rate and maximum
volume included here are those described in the similar
method OSHA ID105. Samples are stable for at least 6 days
at ambient temperature.
Bulk sample, approx.
1 - 3 cubic inch volumeN/A 1.0%
EPA/600/M4- 82-
020, Dec. 1982
PLM
NC $17
Sample is assumed to be homogeneous
Bulk sample, approx.
1 - 3 cubic inch volumeN/A 1.0%
EPA- 600/R-93/116,
July 1993
PLM
NC $17
Price per layer
Asbestos Bulk ID
N/A
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com22
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Asbestos Bulk Point Count
N/ABulk sample, approx.
1 - 3 cubic inch volumeN/A <1.0%
EPA- 600/R-93/116,
July 1993
PLM
NC $51
Asbestos Fiber Count See Fiber Count.
Asbestos Wipe/
Vacuum Wipe
N/A
C-01
MCEF, 25mm, 0.8um, 3PC,
long cowl
N/A 10 - 16 LPM NA
EPA-600/M4- 82-
020, Dec. 1982
PLM
NC $28
Presence/absence measurement only for all forms of
asbestos; test requires a visible filter deposit be present.
Asphalt Fumes, measured
as Total Particulate and
Benzene Soluble Fraction
N/A
C-09
PTFE, Pre-weighed, 37mm,
2um, 2PC
28 - 400 1 - 4 30
NIOSH 5042
Gravimetric, with
extraction
MM $110
Ship refrigerated for overnight delivery. For benzene
solubles results above 0.2 mg/M3, client may elect to run
the PAH screen. If PAHs are desired, wrap cassette in foil
during sampling to protect from light. Includes total
particulate and benzene solubles reporting.
Barium
Total 7440-
39-3
C-05
MCEF, 37mm, 0.8um, 3PC50 - 1000 1.0 - 3.0 2
NIOSH 7300
ICPT $40
Barium Sulfate
Respirable
7727-43-7
- $-
See Particulates, Respirable. Sample may also be tested for
Total Barium, but test is not specific for barium sulfate.
Barium Sulfate
Total
7727-43-7
- $-
See Particulates, Total. Sample may also be tested for Total
Barium, but test is not specific for barium sulfate.
Barium,
Soluble Compounds
7440-39-3
C-05
MCEF, 37mm, 0.8um, 3PC300 1.5 3
NIOSH 7300M
ICPJ $68
Measurement of water-soluble barium compounds.
BCME
542-88-1- $-
See Bis(Chloromethyl)Ether
Benzaldehyde
100-52-7
T-119
DNPH-Treated Silica Gel,
226-119
2 - 30 0.2 - 1.0 1.00TO-11
HPLCN $116
Refrigerate before and after sampling and ship overnight.
Ozone may interfere - use ozone scrubber in known ozone
contaminated areas. Any ketone or aldehyde will react with
the DNPH and is a potential interference. Large
concentrations of acetone or MEK will compete with the
aldehyde and are therefore potential negative
interferences. Media contains residual acetonitrile which
could interfere with acetonitrile monitoring.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com23
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Benzene
71-43-2
T-01
Charcoal, 226-012 - 30 0.01 - 0.2 2
NIOSH 1501
GC/FIDA $56
M-01
SKC POVM, 575-00115 - 240 Min. 0.016 4.0
NIOSH 1501M
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0355 3
NIOSH 1501M
GC/FIDA $56
T-81
Anasorb 747, 226-81
TWA 30
STEL 3 0.03-0.2 1.1
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-00215 - 240 Min. 0.0171 2.2
Proprietary,
IHGC-P029
GC/FID
A $77
M-N521
Assay Technology POVM,
N521
15 - 480 Min. 0.073 2.0 A $56
Benzene Soluble
Fraction N/AC-06
GFF, 37mm, 1um, 3PC960 1 - 2 30
OSHA 58
Gravimetric with
extraction
MM $116
This is the same test as Coal Tar Pitch Volatiles by OSHA 58.
Transfer filter into glass vial using tweezers immediately
after sampling; wrap vial in foil to protect from light.
Additional specific PAH analysis is available as follow-up if
needed for samples with BSF exceeding 0.2 mg/M3.
C-09
PTFE, Pre-weighed, 37mm,
2um, 3PC
28 - 400 1 - 4 30
NIOSH 5042
Gravimetric with
extraction
MM $116
Test includes measurement of Total Particulates and
Benzene Soluble Fraction. This is the NIOSH approach for
both Coal Tar Pitch Volatiles and Asphalt Fumes. Protect
samples from light if follow-up PAH analysis is needed.
Benzidine
92-87-5C-07
GFF, 13mm, 1um, 2PC
Swinnex
20 - 100 0.2 0.2NIOSH 5509
HPLCNC $116
Transfer filter and Teflon ring to vial after sampling. Store in
freezer, ship on dry ice for overnight delivery. Stable at
least 11 days at -15° C.
1,2-Benzisothiazolin-3-one
(BIT)
2634-33-5
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0 0.3
IHO- HPLC-070
HPLC/UVK $160
Samples stable up to 21 days at ambient temperature.
Benzo(a)anthracene
56-55-3 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Benzo(b)fluoranthene
205-99-2 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com24
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Benzo(k)fluoranthene
207-8-9 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Benzo(g,h,i)perylene
191-24-1 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Benzo (a) pyrene
50-32-8 C-06
GFF, 37mm, 1um, 3PC960 2.0 3
OSHA 58
HPLC/FLMM $116
Place filter into glass vial using tweezers and wrap with foil
to protect from light. Ship refrigerated by overnight
delivery. Also see selected PNA Profile.
K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Benzophenone
119-61-9
T-110
Chromosorb 106,
226-110
48 Max 0.2 Max 1.6OSHA PV2130
GC/FIDNC $56
Samples are stable at ambient temperature for at least 14
days.
Benzoyl Chloride
98-88-4T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2 5
AIHAJ 12/1986,
pp.742-746
GC-FID
NN $77
Other chloroformates/acid chlorides may be tested from
the same sample. Store media and samples cold, ship
samples cold overnight. Samples must arrive at lab within
10 days of collection.
Benzoyl Peroxide
94-36-0C-05
MCEF, 37mm, 0.8um, 3PC40 - 400 1 - 3 1
NIOSH 5009
HPLC/UVNC $116
Ship refrigerated for overnight delivery.
Synonym: Dibenzoyl peroxide.
Benzoyl Peroxide
Inhalable
94-36-0
Call lab 960 Max 2.0 1NIOSH 5009M
HPLCNC $116
Important Note: 1. The IOM sampler should be operated
at 2 Lpm in order to correctly collect the particle size range
(up to 100 um) which comprises inhalable particles. 2. This
listing modifies NIOSH method 5009, which does not take
into account monitoring of inhalable particulates. The
maximum air volume of 400 L recommended in method
5009 has been increased to 960 L in this listing in order to
allow for a full-shift sample at the 2 Lpm sampling rate
required for the IOM sampler. However, if analytical results
show a filter loading of 1 to 2 milligrams or greater,
consider resampling for a shorter time period. 3. If
available, ship samples by overnight delivery to the lab in
an insulated container with cold pack (9% loss of material
from filter has been measured after 1 week @ 25 C).
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com25
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Benzyl Acetate
140-11-4
T-01
Charcoal, 226-0110 - 50 0.1 - 0.2 20
OSHA CSI
GC/FIDA $56
Benzyl Alcohol
100-51-6
T-01
Charcoal, 226-0110 - 24 0.01 - 0.2 20
NIOSH 1402M
GC/FIDD $56
T-95
XAD-7, 226-95
TWA 24
STEL 4.5
TWA 0.02- 0.1
STEL 0.3 2
OSHA 32M
HPLCK $116
Benzyl Chloride
100-44-7
T-01
Charcoal, 226-016 - 50 0.01 - 0.2 5
NIOSH 1003
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0272 7.5
NIOSH 1003M
GC/FIDA $56
Benzylchloroformate
501-53-1
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2 5
AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77
Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Beryllium
7440-41-7
C-05
MCEF, 37mm, 0.8um, 3PC200 - 2000 1.0 - 4.0 0.005
NIOSH 7300M
ICP/MST $46
Not appropriate for monitoring “high-fired” beryllium
oxide. When monitoring “high-fired” beryllium oxide (such
as manufactured for use in ceramics in electronic
Applications, and in lasers), contact the lab prior to
sampling. The combination of digestion
technique/analytical technique/ method sensitivity must
be carefully chosen to obtain accurate results. Contact lab
for further information.
C-05
MCEF, 37mm, 0.8um, 3PC200 - 2000 1.0 - 4.0 0.05
OSHA ID125M
ICPEE $40
This approach is suitable for analysis of high-fired beryllium
oxide.
Beryllium
Wipe
7440-41-7
K-07
Ghost Wipe Kit100 cm2 - 0.01
NIOSH 7102M
GFAAT $51
This approach is NOT suitable for analysis of high-fired
beryllium oxide.
K-07
Ghost Wipe Kit100 cm2 - 0.1
OSHA ID125M
ICPEE $40
This approach is suitable for analysis of high-fired beryllium
oxide.
Biphenyl
92-52-4$-
See Diphenyl.
Bis (Chloromethyl) Ether
(BCME)
542-88-1
T-89
TCP-treated XAD- 4,
226-89
TWA 20
STEL 4.5 0.05-0.3 0.014
Proprietary,
IHGC-P011
GC/ECD
NC $153
Immediately after sampling heat treat tube(s) at 75°C for 45
minutes. Wrap in aluminum foil to protect from light.
Chloromethyl Methyl Ether can be determined on same
tube.
Bismuth
1304-82-1C-05
MCEF, 37mm, 0.8um, 3PC50 - 1000 1.0 - 3.0 2
NIOSH 7300M
ICPT $40
Bisphenol A
80-05-7
C-06
GFF, 37mm, 1um, 3PC300 1.6 2
NIOSH PCAM 333
HPLCN $116
Store samples in freezer. Ship cold overnight.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com26
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Boric Acid
(measured as Boron)
10043-35-3
C-05
MCEF, 37mm, 0.8um, 3PC50 - 1000 1.0 - 3.0 12
NIOSH 7300M
ICP-OEST $40
Samples are acid digested and tested for boron; equivalent
H3BO3 is calculated mathematically. Test is not specific for
boric acid.
Boron
7440-42-8C-05
MCEF, 37mm, 0.8um, 3PC50 - 500 1.0 - 3.0 2
NIOSH 7300M
ICPT $40
Bromine
7726-95-6
IMP-09
Impinger,
NaH- CO3/ Na2CO3
80 - 240 0.5 7.5OSHA ID 108
ICNC $69
Impinger solution available from laboratory.
C-16
Ag/PTFE, Cl2/Br2 Sampler,
25mm, 3PC
15 - 360 0.3 - 1.0 5.0NIOSH 6011
ICAA $69
Preferred method. Precleaning of filter required prior to
shipment. Cassette has short shelf life. Avoid direct sunlight
on filter during or after sampling. Chlorine can also be
measured as well as bromine.
Bromoethane
74-96-4- $-
See Ethyl Bromide
Bromoform
75-25-2
T-01
Charcoal, 226-014 - 70 0.01 - 0.2 20
NIOSH 1003
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0293 30
NIOSH 1003M
GC/FIDA $56
Bromomethane
74-83-9$-
See Ethyl Bromide
1-Bromopropane
106-94-5T-01
Charcoal, 226-0112 Max 0.2 Max 0.5
NIOSH 1011M
GC/FIDA $56
The larger charcoal tube 226-09 may be used for greater
capacity at higher concentrations.
Synonym: n-Propyl bromide
M-3500
3M POVM, 3500Up to 8 hours 0.032 1.5
NIOSH 1011M
GC/FIDA $56
3M 3520 is recommended for 8-hour samples collected at
high humidity (>80%).
BTEX Profile
N/A T-01
Charcoal, 226-015 - 15 0.05 - 0.2
See
comments
NIOSH 1501
GC/FIDA $127
Profile includes Benzene (LOQ = 2 ug), Ethyl Benzene (LOQ
= 5 ug), Toluene (LOQ = 5 ug), Xylene (LOQ = 5 ug), Total
Hydrocarbons as Hexane (LOQ = 20 ug).
M-01 SKC POVM,
575-001Up to 8 hours Various
See
comments
NIOSH 1501M
GC/FIDA $127
Profile includes Benzene (LOQ = 4 ug), Ethyl Benzene (LOQ
= 10 ug), Toluene (LOQ = 10 ug), Xylene (LOQ = 10 ug), Total
Hydrocarbons as Hexane (LOQ = 40 ug).
M-3500
3M POVM, 3500Up to 8 hours Various
See
comments
NIOSH 1501M
GC/FIDA $127
Profile includes Benzene (LOQ = 3 ug), Ethyl Benzene (LOQ
= 7.5 ug), Toluene (LOQ = 7.5 ug), Xylene (LOQ = 7.5 ug),
Total Hydrocarbons as Hexane (LOQ = 30 ug).
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com27
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1,3-Butadiene
106-99-0
T-73
TBC-Treated charcoal,
226-73
3 Max 0.01 - 0.05 2OSHA 56
GC/FIDA $56
Preferred method. Store collected samples under
refrigeration, and ship refrigerated overnight. Samples are
stable at least 17 days if stored cold.
T-09
(2) Charcoal, 226-095 - 25 0.01 - 0.5 8
NIOSH 1024
GC/FIDI $56
Two 226-09 tubes in series; cap separately after sampling.
Ship cold overnight, store in freezer after sampling.
M-3520
3M POVM 3520, 2-stageUp to 8 hours 0.0428 3
NIOSH 1024M
GC/FIDI $56
1,3-Butanediol
107-88-0- $-
See 1,3-Butylene Glycol
1,4-Butanediol
110-63-4- $-
See 1,4-Butylene Glycol
n-Butanol
71-36-3- $-
See n-Butyl alcohol
Sec-Butanol
78-92-2- $-
See sec-Butyl Alcohol.
t-Butanol
75-65-0- $-
See tert-Butyl alcohol.
2-Butanone
78-93-3- $-
See Methyl Ethyl Ketone.
2-Butoxyethanol
111-76-2
T-01
Charcoal, 226-011 - 10 0.01 - 0.1 20
NIOSH 1403M
GC/FIDE $56
Also known as Butyl Cellosolve, Ethylene Glycol Monobutyl
Ether, and Dowanol EB
M-3500
3M POVM, 3500Up to 8 hours 0.0282 30
NIOSH 1403M
GC/FIDE $56
Also known as Butyl Cellosolve, Ethylene Glycol Monobutyl
Ether, and Dowanol EB
2-Butoxyethyl Acetate
112-07-2
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
OSHA 83
GC/FIDE $56
Also known as Butyl Cellosolve Acetate and Ethylene Glycol
Monobutyl Ether Acetate
M-3500
3M POVM, 3500Up to 8 hours 0.0243 30
OSHA 83M
GC/FIDE $56
Also known as Butyl Cellosolve Acetate and Ethylene Glycol
Monobutyl Ether Acetate
1-Butoxy-2-Propanol
5131-66-8-
See Propylene Glycol n-Butyl Ether
n-Butyl Acetate
123-86-4
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1450
GC/FIDA $56
T-81
Anasorb 747, 226-8110 0.03-0.2 1.1
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min 0.013 2.2
Proprietary,
IHGC-P029
GC/FID
A $77
M-3500
3M POVM, 3500Up to 8 hours 0.0316 30
NIOSH 1450M
GC/FIDA $56
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com28
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
s-Butyl Acetate
105-46-4
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1450
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0286 30
NIOSH 1450M
GC/FIDA $56
t-Butyl Acetate
540-88-5
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1450
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0294 30
NIOSH 1450M
GC/FIDA $56
n-Butyl Acrylate
141-32-2
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1450M
GC/FIDA $56
Also see Acrylate Monomer Profile.
M-3500
3M POVM, 3500Up to 8 hours 0.0273 30
NIOSH 1450M
GC/FIDA $56
T-73
TBC-Treated charcoal,
226-73
1 - 12 0.01 - 0.05 20OSHA CSI
GC/FIDA $56
M-02
SKC POVM, 575-00230 min - 8 hours 0.012 2.5
Proprietary,
IHGC-P029
GC/FID
A $77
Recommended passive sampling method.
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2 1.3
Proprietary,
IHGC-P029
GC/FID
A $77
n-Butyl Alcohol
71-36-3
T-01
Charcoal, 226-012 - 10 0.01 - 0.2 20
NIOSH 1401
GC/FIDC & A $56
M-3500
3M POVM, 3500Up to 8 hours 0.0343 30
NIOSH 1401M
GC/FIDC $56
sec-Butyl Alcohol
78-92-2
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.01-0.2
STEL 0.2 20
NIOSH 1401
GC/FIDC $56
M-3500
3M POVM, 3500Up to 8 hours 0.0348 30
NIOSH 1401M
GC/FIDC $56
t-Butyl Alcohol
75-65-0
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.01-0.2
STEL 0.2 20
NIOSH 1400
GC/FIDC $56
M-3500
3M POVM, 3500Up to 8 hours 0.0352 30
NIOSH 1400M
GC/FIDB $56
Butyl Carbitol
112-34-5- $-
See Diethylene Glycol Monobutyl Ether.
Butyl Carbitol Acetate
124-17-4- $-
See Diethylene Glycol Monobutyl Ether Acetate
Butyl Cellosolve
111-76-2- $-
See 2-Butoxyethanol.
Butyl Cellosolve Acetate
112-07-2- $-
See 2-Butoxyethyl Acetate.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com29
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
n-Butyl Glycidyl Ether
2426-08-6
T-01
Charcoal, 226-0115 - 30 0.01 - 0.2 20
NIOSH 1616
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0270 30
NIOSH 1616M
GC/FIDA $56
t-Butyl Glycidyl Ether
7665-72-7
T-01
Charcoal, 226-0115 - 30 0.01 - 0.2 20
NIOSH 1616M
GC/FIDA $56
tert-Butyl Hydrazine
Hydrochloride, as
Particulate
7400-27-3
C-11
PVC, Preweighed, 37mm,
5um, 2PC
TWA 960
STEL 60 1-4 50
NIOSH 0500
Gravimetric$21
Not chemical specific.
tert-Butyl Hydroperoxide
75-91-2
…BHP
T-47-01
Silica Gel, 226-47-01
TWA 10
STEL 3
TWA 0.05-0.2
STEL 0.22
IN-HOUSE
GC/MSK $160
Samples are stable at least 9 days. Three (3) sample
minimum.
Butyl Isocyanate
111-36-4
K-20
GFF, 2PP-treated, C-1415-30 1.0 Max 0.4
OSHA Stopgap
HPLC/UVO $116
Sample open faced. Refrigerate media before and after
sampling. Ship cold by overnight delivery. Testing is for
both 2,4- and 2,6-TDI isomers. Media has 2-month shelf life
(stored cold). OSHA National Emphasis Program specifies
field desorption immediately after sampling; the K-20 kit
includes C-14 cassette, V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Contact lab for more
specifics.
N-Butyl Lactate
138-22-7
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.02-0.2
STEL 0.21
OSHA PV2080
GC/FIDE $77
Butyl Mercaptan
109-79-5
C-48
GFF, Hg Acetate-Treated,
37mm, 2PC,
SKC PN 225-9007
TWA 20
STEL 3 - 150 Max0.2 Max -
NIOSH 2542
GC/FPDNC
Call for
pricing
Store media cold before use. Protect samples from light.
Subcontracted to an outside laboratory. Samples stable at
least 3 weeks at 25ºC.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com30
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Butyl Methacrylate
97-88-1
T-30-04
XAD-2, 226-30-041 - 8 0.05 - 0.1 20
NIOSH 2537M
GC/FIDDD $56 Also see Acrylate Monomer Profile.
T-81
Anasorb 747, 226-81TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2 1.3
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.01 2.6
Proprietary,
IHGC-P029
GC/FID
A $77 Recommended passive sampling method.
n-Butyl Phthalate
84-74-2- $- See Dibutyl Phthalate.
n-Butylamine
109-73-9
T-30-18
NITC-Treated XAD-2,
226-30-18
3 - 30 0.01 - 1.0 4NIOSH 2540M
HPLCN $116
Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
1,3-Butylene Glycol
107-88-0T-57
GFF/XAD-7 OVS, 226-571 - 20 0.01 - 0.10 20
NIOSH 5523
GC/FIDK $77 Also see Glycol Profile.
1,4-Butylene Glycol
110-63-4T-57
GFF/XAD-7 OVS, 226-5760 - 1000 0.5 - 1.0 80
NIOSH 5523M
GC/FIDK $77
Butyraldehyde
123-72-8
T-119
DNPH-Treated Silica Gel,
226-119
2 - 30 0.2 - 1.0 0.8TO-11
HPLCN $116
Refrigerate before and after sampling and ship overnight.
Ozone may interfere - use ozone scrubber in known ozone
contaminated areas. Any ketone or aldehyde will react with
the DNPH and is a potential interference. Large
concentrations of acetone or MEK will compete with the
aldehyde and are therefore potential negative
interferences. Media contains residual acetonitrile which
could interfere with acetonitrile monitoring.
gamma- Butyrolactone
96-48-0
T-01
Charcoal, 226-0110 Max 1 Max 20
OSHA Stopgap
GC-FIDE $56
Cadmium
7440-43-9
C-05
MCEF, 37mm, 0.8um, 3PC 800 - 1000 1.0 - 3.0 0.5NIOSH 7300
ICPT $40
C-05
MCEF, 37mm, 0.8um, 3PC 800 - 1000 1.0 - 3.0 0.025NIOSH 7300M
ICP/MST $46
Calcium
7440-70-2C-05
MCEF, 37mm, 0.8um, 3PC100 - 1000 1.0 - 3.0 2
NIOSH 7300
ICPT $40 Consult TLV booklet for form of analyte.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com31
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Camphor
76-22-2
T-01
Charcoal, 226-011 - 25 0.01 - 0.2 10
NIOSH 1301
GC/FIDH $56
M-3500
3M POVM, 3500Up to 8 hours 0.0214 15
NIOSH 1301M
GC/FIDH $56
Caprolactam
Vapor
105-60-2
T-57
GFF/XAD-7 OVS,
226-57
100 1 Max 10OSHA PV2012
HPLCK $116 Vapor analysis only.
Caprolactam
Vapor + Particulate
105-60-2
T-57
GFF/XAD-7 OVS,
226-57
100 1 Max 10OSHA PV2012
HPLCK $160
Filter (particulate) and sorbent beds (vapor) are all tested
and reported separately; a cumulative result for all three
sections is also reported.
Carbitol (DGMEE)
111-90-0- $- See Diethylene Glycol Monoethyl Ether
Carbitol Acetate
112-15-2- $- See Diethlylene Glycol Ethyl Ether Acetate
Carbon Black
(as Total Particulate)
1333-86-4
C-11
PVC, Preweighed, 37mm,
5um, 2PC
100 - 960 1.0 - 2.0 50NIOSH 0500
GravimetricNC $21
Any and all other particulates will be a positive interference
with the gravimetric analysis. More specific analysis for
Carbon Black by OSHA ID196 is available as a subcontracted
analysis. Also see the entry for Elemental Carbon.
Carbon Dioxide
124-38-9Call Lab 3.5 - 500
OSHA ID172
GC/TCDNC $- Analysis is subcontracted.
Carbon Disulfide
75-15-0
T-44 & T-01
in series Drying Tube,
226-44, preceding
Charcoal, 226-01
25 Max 0.2 MaxNIOSH 1600
GC/FPDNC
Call for
pricing
Precede the charcoal tube with a drying tube (PN 226-44).
Store and ship cold, with drying tube still attached.
Subcontracted to outside laboratory.
Carbon Tetrabromide
558-13-4T-93
XAD-4, 226-93
TWA 10
STEL 3
TWA 0.02-0.2
STEL 0.2
OSHA Stopgap
GC/ECDNC
Call for
pricing
Important Note: Contact the laboratory before sampling in
order to allow time for set up. Subcontracted to outside
laboratory.
Tetrachloromethane
56-23-5
T-01
Charcoal, 226-013 - 150 0.01 - 0.2 20
NIOSH 1003
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0302 30
NIOSH 1003M
GC/FIDA $56
Carbonyl Chloride
75-44-5- $- See Phosgene
Catechol
575-001
T-95
XAD-7, 226-9524 Max 0.1 Max 30
OSHA Stopgap
GC/FIDA $56
Cellosolve
110-80-5- $- See 2-Ethoxyethanol
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com32
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Cellosolve Acetate
111-15-9- $- See 2-Ethoxyethyl Acetate
Cerium Oxide
1306-38-3 C-05
MCEF, 37mm, 0.8um, 3PC960-1920 2-4 2.5 ICP T $77
Call to schedule analysis to ensure standard is in stock.
Three (3) sample minimum. Testing is for elemental cerium,
with mathematical calculation of cerian oxide.
Chlordane
57-74-9
T-30-16
GFF/XAD-2 OVS,
226-30-16
10-480 0.5 - 1.0 0.8OSHA 67
GC/ECDNC $102 Also see Chlorinated Pesticide Profile.
Chlorine
7782-50-5C-16
Ag/PTFE, Cl2 / Br2
Sampler, 25mm, 3PC
15 - 90 0.3 - 1.0 2.5NIOSH 6011
ICAA $69
Membrane has short shelf life. Protect from direct sunlight
or prolonged UV (fluorescent) light. Bromine vapor can also
be measured on same sampling device. Samples are stable
for at least 30 days after sampling.
Chlorine Dioxide
10049-04-4
IMP-04
MFGB, 15 mL 0.02% KI in
NaH-CO3/ Na2CO3
10 - 120 0.5 10OSHA ID 202
ICNC $153
Protect solution from light. Collection solution must stay
basic; a large concentration of acid gas (such as SO2) may
exceed the solution buffering capacity. Avoid this by
1) collecting smaller volume of air in such atmospheres, or
2) check solution pH after sampling and discard if acidic.
Midget Fritted Glass Bubbler (MFGB) Impinger solution is
available from the laboratory. Advance notice is required
due to instability of reagent. Collected samples are stable
at least 30 days.
5-Chloro-2-Methyl-4-Isothi-
azolin-3-One
(RH-651)
26172-55-4
K-12
Methanol-moistened
cotton-fabric swab Wipe 100 CM2 area N/A 1.20IHHPLC-P007
HPLC/UVJJ $160
Sampling media is methanol moistened cotton fabric swab
and requires immediate methanol extraction.
TexWipe®TX306, Fisher Scientific, Cat. # 18-308D cut in 2 in
x 2 in squares. Sampling media including methanol, vials,
pipette, and sampling instructions are available from
laboratory.
T-99
GFF/Silica Gel OVS,
226-99 TWA 50
STEL 7.5
0.2 TWA
0.5 STEL0.2
IHHPLC-P008
HPLC/UVJJ $160
Avoid and ensure that the outside of the OVS tube is not
contaminated when sampling atmospheres potentially
containing Kathon 886 ® Biocide as either a particulate or
aerosol. Component of Kathon 886 ® Biocide. Also see 2-
Methyl-4 Isothiazolin-3-one.
3-Chloro 2-Methyl-1-
Propene
563-47-3
T-81
Anasorb 747, 226-81
TWA 48
STEL 3 0.20 0.07
IN-HOUSE
GC/MSNC $160 Synonym: Methallyl Chloride
Chloroacetyl Chloride
79-04-9
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2 10.00
AIHA J 12/1986,
pp 742-746
GC-FID
NN $77Store media and samples cold, ship samples cold overnight.
Samples must reach lab within 10 days of sampling.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com33
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Chloroacetic Acid See Monochloroacetic Acid
Chlorobenzene
108-90-7
T-01
Charcoal, 226-011.5 - 40 0.01 - 0.2 20
NIOSH 1003
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0293 30
NIOSH 1003M
GC/FIDA $56
p-Chlorobenzotrifluoride
98-56-6
T-01
Charcoal, 226-0110 Max 0.2 Max 10
OSHA Stopgap
GC/FIDA $56
M-3520
3M POVM, 3520Up to 8 hours 0.0258 15
OSHA Stopgap
GC/FIDA $56
Chlorobromomethane
74-97-5
T-01
Charcoal, 226-010.5 - 8 0.01 - 0.2 20
NIOSH 1003
GC/FIDA $56
Chlorodifluoromethane
75-45-6
M-3520
3M POVM 3520,
2-stage
Up to 8 hours 0.0413 50NIOSH 1018M
GC/FIDA $77 Note low air volumes.
O-91
Carbosieve S-III0.1 - 1.0 0.01 - 0.05 50
OSHA CSI
GC/FIDA $77 Note low air volumes.
T-09 (2)
Charcoal, 226-091 - 4 0.01 - 0.05 50
NIOSH 1018M
GC/FIDA $77
Sample with two tubes in series (back tube can be smaller
226-01). Note low air volumes.
Chloroethene See Vinyl chloride
1-Chloro-2,
3-epoxypropane
106-89-8
- $- See Epichlorohydrin
Chloroethane
75-00-3- $- See Ethyl Chloride
Chloroform
67-66-3
T-01
Charcoal, 226-011 - 50 0.01 - 0.2 10
NIOSH 1003
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0335 15
NIOSH 1003M
GC/FIDA $56
Chloromethane
74-87-3- $- See Methyl Chloride
Chloromethyl Benzene
100-44-7- $- See Benzyl chloride
Chloromethyl Methyl Ether
(CMME)
107-30-2
T-89
TCP-treated XAD-4,
226-89
TWA 20
STEL 4.5 0.05-0.3 0.018
Proprietary,
IHGC-P011
GC/ECD
NC $153Immediately after sampling heat treat tube(s) at 75°C for 45
minutes. Wrap in aluminum foil to protect from light. BCME
can be analyzed on same sample.
o-Chlorophenol
95-57-8T-10
Silica Gel, 226-10
TWA 10-40
STEL 3
TWA 0.05-0.2
STEL 0.2 2.00
NIOSH 2014
HPLC/UVN $116
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com34
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
o-Chloro-P-Nitroaniline
121-87-9 C-05
MCEF, 37mm, 0.8um, 3PC
TWA 480
STEL 60
TWA 1-4
STEL 4 10
NIOSH 5033
HPLC/UVNC
Call for
pricing
Subcontracted to outside laboratory. The referral
laboratory will analyze for o-chloro-p-nitroaniline on
request using the same method as p-nitroanaline.
Chloroprene
(beta-chloroprene)
126-99-8
T-01
Charcoal, 226-01 1.5 - 8 0.01 - 0.05 20NIOSH 1002
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0322 30
NIOSH 1002M
GC/FIDA $56
3-Chloropropene
107-05-1- $- See Allyl Chloride
o-Chlorotoluene
95-49-8
T-01
Charcoal, 226-0110 Max 0.2 Max 20
NIOSH 1003M
GC/FIDA $56
M-3500
3M POVM 3500Up to 8 hours 0.027 30
NIOSH 1003M
GC/FIDA $56
Chlorpyrifos
2921-88-2
T-30-16
GFF/XAD-2 OVS,
226-30-16
480 1.0 - 1.5 0.2OSHA 62M
GC/ECDNC $102
Chromium, Total
7440-47-3C-05
MCEF, 37mm, 0.8um, 3PC50 - 1000 1.0 - 3.0 2
NIOSH 7300M
ICPT $40 This method measures total chromium - metallic and salts.
Chromium, Low Level, Total
7440-47-3C-MCE-NN
MCE, Low Metals, 37mm,
0.8um, 2PC
50 - 1000 1.0 - 3.0 0.13NIOSH 7300M
ICP/MST $46
Chromium, Hexavalent
Different for each
compound
C-10
PVC, 37mm, 5um, 3PC30 - 960 2 0.025
OSHA ID215v2
ICNC $102
Recommended Method. Sample stability varies with
exposure source monitored. Identify operation sampled
(spray paint, chrome plating, welding, etc.) on Request for
Analysis form. Ship overnight within 24 hours of sampling
to meet all holding times. CrVI from acidic solutions, such
as plating, must be extracted in the lab within 6 days of
collection. CrVI from metalworking must be extracted in
the lab within 8 days of collection. 25 mm PVC filter
cassette (PN C-41) may be used to facilitate sampling under
a helmet or hood.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com35
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Chromium, Hexavalent
(Welding and Other Hot
Environments) Different for
each compound
C-53
PVC, 37mm, 5um, Quartz
support, 2PC
30 - 960 2 Max 0.025OSHA ID215v2
ICNC $102
Hot environments sometimes cause the 37mm cassettes to
expand resulting in leakage around the PVC filter onto the
backup pad. The quartz fiber backup pads in C-53 cassettes
are analyzed along with the PVC filters. See hold time
description included above.
Chromium, Hexavalent
Wipe
Different for each
compound
C-53
(PVC and/or quartz filter)
PVC, 37mm, 5um, Quartz
support, 2PC
100 cm2 N/A 0.025OSHA W4001M
ICNC $102
Cassette holds both PVC and Quartz filters; wipe samples
can be collected using either or both filters. Fold exposed
side in, and transfer into vial (PN V-15). Identify operation
sampled (spray paint, chrome plating, welding, etc.) on
Request for Analysis form. Ship overnight within 24 hours
of sampling to meet all holding times.
Chromium, Hexavalent Bulk
Sample Different for each
compound
1 gram Approx. N/A0.1 ug/g
Approx.
OSHA ID215v2
ICNC $102 Material must be homogenous and finely divided.
Chromic Acid - Soluble
Chromates
1333-82-0C-10
PVC, 37mm, 5um, 3PC1000 1.0 - 4.0 0.2
NIOSH 7600
SPECNC $69
OSHA ID215 is preferred method. Filter must be removed
from cassette and placed into a glass vial immediately after
sampling. Possible interferences include copper, iron,
nickel, and vanadium.
Chrysene
218-01-9 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
CMME
107-30-2$-
See Chloromethyl Methyl Ether. BCME can be analyzed on
same sample.
Coal Tar Pitch Volatiles,
measured as Benzene
Soluble Fraction (BSF)
65996-93-2
C-06
GFF, 37mm, 1um, 3PC960 2.0 60
OSHA 58
Grav/BZ SolMM $100
Transfer filter into glass vial using tweezers immediately
after sampling; wrap vial in foil to protect from light.
Additional specific PAH analysis is available as follow-up if
needed for samples with BSF exceeding 0.2 mg/M3.
Cobalt
7440-48-4
C-05
MCEF, 37mm, 0.8um, 3PC 400 - 1000 1.0 - 3.0 2NIOSH 7300M
ICPT $40
May also be tested with tungsten per OSHA Method ID-
213.
C-05
MCEF, 37mm, 0.8um, 3PC 400 - 1000 1.0 - 3.0 0.025NIOSH 7300M
ICP-MST $46
May also be tested with tungsten per OSHA Method ID-
213.
Coke Oven Emissions
67-63-0 C-06
GFF, 37mm, 1um, 3PC2.0 30
OSHA 58
Grav/BZ SolMM $100
Transfer filter into glass vial using tweezers immediately
after sampling; wrap vial in foil to protect from light.
Additional specific PAH analysis is available as follow-up if
needed for samples with BSF exceeding 0.15 mg/M3.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com36
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Copper
7440-50-8
C-05
MCEF, 37mm, 0.8um, 3PC 40 - 1000 1.0 - 3.0 1NIOSH 7300
ICPT $40
C-05
MCEF, 37mm, 0.8um, 3PC 100 1-3 0.13NIOSH 7300M
ICP-MST $46 Analysis does not distinguish between dust and fume.
Cotton Dust
N/A
C-12
PVC, Preweighed, 37mm,
5um, 3PC
20 - 400 Elutriator 50 NC $21
Cresols, Total Isomers,
Vapor
1319-77-3
T-95
XAD-7, 226-9524 0.1 30
OSHA 32
HPLCK $116
Cresols and phenol can be sampled and analyzed from the
same sampler.
Cresols, Vapor and
Particulate
1319-77-3
T-57
GFF/XAD-7 OVS, 226-5748 0.1 30
OSHA 32M
HPLCK $116
Crotonaldehyde
4170-30-3
T-119
DNPH-Treated Silica Gel,
226-119
7.5 0.5 0.50EPA TO-11M
HPLC/UVN $116
Analysis is for a mix of cis- and trans- isomers. Refrigerate
before and after sampling and ship overnight. Ozone may
interfere - use ozone scrubber in known ozone contami-
nated areas. Any ketone or aldehyde will react with and
deplete the DNPH, and is a potential interference. ACGIH
states that if instantaneous monitoring is not feasible,
ceiling values “can be assessed by sampling over a period
that should not exceed 15 minutes, except for those
substances that may cause immediate irritation when
exposures are short.” Media contains residual acetonitrile
which could interfere with acetonitrile monitoring. Also see
Aldehyde profile.
Cumene
98-82-8
T-01
Charcoal, 226-0110 - 30 0.01 - 0.2 20
NIOSH 1501
GC/FIDA $53
M-3500
3M POVM, 3500Up to 8 hours 0.0245 30
NIOSH 1501M
GC/FIDA $56
T-81
Anasorb 747, 226-81TWA 10
STEL 3 0.03-0.2 1
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.013 2
Proprietary,
IHGC-P029
GC/FID
A $77
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com37
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Cupferron
135-20-6
IMP-11
Impinger, DI Water100.00 1.0 10
IN-HOUSE
HPLC/UVNC $160
Cyanides
Total VariousIMP-12
(order vials separately)
MFGB, 15 mL
0.1N KOH + 0.8um
PVC Prefilter
10 - 180 0.5 - 1.0 2.5NIOSH 7904
ISEFF $150
Analyze within five (5) days because particulate on filter
may liberate HCN gas; impinger samples are stable at least
30 days.
Cyanides, HCN and water-
soluble cyanide particulates T-28
Soda Lime, 226-282 - 90 0.2
2.6
(each
section)
NIOSH 6010M
ISENC $150
Before sampling, remove glass wool plug that precedes
glass fiber filter (stabilizes sampler during shipment).
Testing the prefilter for particulate cyanide allows this
sampler to provide both gaseous and particulate cyanide
results.
Cyanides - Gaseous (HCN)
See Hydrogen Cyanide - $- See Hydrogen Cyanide.
Cyanides - Water-soluble
Particulates, Various
C-05
MCEF, 37mm, 0.8um, 3PC 10 - 180 0.5 - 1.0 2.5NIOSH 7904M
ISEFF $69
Analyze within five (5) days because particulate on filter
may liberate HCN gas.
Cyclohexane
110-82-7
T-01
Charcoal, 226-012.5 - 5.0 0.01 - 0.2 20
NIOSH 1500
GC/FIDA $56
M-3500
3M POVM, 3500Up to 6 hours 0.0324 30
NIOSH 1500M
GC/FIDA $56
T-81
Anasorb 747,
226-81
TWA 10
STEL 3 0.03-0.2 1
Proprietary,
IHGC-P029
GC/FID
A $77
M02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.02 2.1
Proprietary,
IHGC-P029
GC/FID
A $77
Cyclohexanol
108-93-0
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1402
GC/FIDD $56
M-3500
3M POVM, 3500Up to 8 hours 0.0295 30
NIOSH 1402M
GC/FIDD $56
T-81
Anasorb 747, 226-81 TWA 10 0.03-0.2 1.4
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.01 2.7
Proprietary,
IHGC-P029
GC/FID
A $77
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com38
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Cyclohexanone
108-94-1
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1300
GC/FIDA $56
T-110
Chromosorb 106,
226-110
10 0.05 - 0.2 20OSHA 1
GC/FIDNC $56
M-3500
3M POVM, 3500Up to 8 hours 0.0289 30
NIOSH 1300M
GC/FIDA $56
T-81
Anasorb 747, 226-81TWA 10
STEL 3 0.03-0.2 1.4
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.015 2.7
Proprietary,
IHGC-P029
GC/FID
A $77
Cyclohexene
110-83-8
T-01
Charcoal, 226-015 - 7 0.01 - 0.2 20
NIOSH 1500
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0323 30
NIOSH 1500M
GC/FIDA $56
T-81
Anasorb 747, 226-81TWA 10
STEL 3 0.03-0.2 1.1
Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.015 2.2
Proprietary,
IHGC-P029
GC/FID
A $77
Cyclohexylamine
108-91-8
T-30-18
NITC-Treated XAD-2, 226-
30-18
12 Max 0.1 Max 8NIOSH 2540M
HPLCN $116
Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Cyclopentadiene
542-92-7Call lab Maleic Andydride-
Treated Chromosorb 1043 0.01-0.05 -
NIOSH 2523
GC/FID- $- Sampling tube is treated Chromosorb-104 (special order).
Cyclopentane
287-92-3
T-01
Charcoal, 226-015 0.2 20
OSHA CSI
GC/FIDA $56
DBE (Dupont Dibasic
Esters™)
N/A
- $- See Dibasic Ester.
DBP
84-74-2- $- See Dibutyl Phthalate.
DDVP
62-73-7- $- See Dichlorvos.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com39
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Decafluoropentane
138495-42-8T-09
(2) Charcoal, 226-090.5 - 4 0.01 - 0.05 50
NIOSH 1018M
GC/FIDI $77
Two tubes in series; cap separately after sampling. Second
tube can be smaller 226-01. Store samples refrigerated,
ship cold overnight.
Decamethylcyclopentasi-
loxane
541-02-6
T-09
Charcoal, 226-09
TWA 96
STEL 30
TWA 0.2
STEL 2.0 10
IHGC-P040
GC/FIDA $77 Store samples in freezer, ship cold overnight.
n-Decane
124-18-5
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1500
GC/FIDA $56
M-3500
3M POVM 3500Up to 8 hours 0.0231 30
NIOSH 1500M
GC/FIDA $56
Desflurane
57041-67-5
T-81
Anasorb 747, 226-813 0.05 10
OSHA 106M
GC/FIDCC $69
Desmodur W
5124-30-1- $- See Methylene Bis(4-Cyclohexylisocyanate)
Di(2-Ethylhexyl) Phthalate
117-81-7T-56
GFF/Tenax OVS, 226-56
TWA 240
STEL 15 1.0 8
OSHA 104M
GC/FIDCC $81 Synonym: Di-sec-Octyl Phthalate, also DOP
Diacetone Alcohol
123-42-2
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1402
GC/FIDD $56 Synonym: 4-Hydroxy-4-methyl-2-pentanone
M-3500
3M POVM, 3500Up to 8 hours 0.0282 30
NIOSH 1402M
GC/FIDD $56
Diacetyl
431-03-8T-183
(2 in Series) Custom Silica
Gel, 226-183
TWA 9 Max
STEL 3 Max
0.050 Max
0.20 Max0.2
OSHA 1012
GC/ECDNC $110
Protect from light during sampling and storage wrapped
with aluminum foil). Store and ship samples cold. Ship
overnight. May be sampled on same tube with acetoin.
Filter built into tube faces incoming air stream. Samples
stable 17 days if stored cold. Three (3) sample minimum
charge will be applied.
Diatomaceous Earth,
Respirable as Particulate
61790-53-2- $- For speciation as amorphous silica, see Silica, Amorphous.
Diazinon
333-41-5T-57
GFF/XAD-7 OVS, 226-5712 - 240 0.2 - 1.0 0.02
OSHA 62
GC/ECDS $102
Dibasic Ester (DBE)
119-40-0T-01
Charcoal, 226-015 - 10 0.05 - 0.2 50
IHGC-P036
GC/FIDNC $77
Made from Dimethyl Adipates, Sebacates, and Glutarates.
Ship 5 ml sample of bulk material. DuPont product.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com40
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Dibenz(a,h)anthracene
53-70-3 K-06
PTFE + ORBO 43200-1000 2 3
NIOSH 5506
HPLCN $116
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
DIBK - $- See Diisobutyl Ketone.
Diborane
19287-45-7
T-151
Oxidizer-Treated Charcoal,
226-151
60 - 260 0.5 - 1.0 5NIOSH 6006M
ICPNC $-
Samples are subcontracted to outside laboratory. PTFE
prefilter (C-45) required if particulate boron compounds
are present. Short shelf life media.
1,2-Dibromoethane
106-93-4- $- See Ethylene Dibromide.
Di-n-butylamine
111-92-2
T-30-18
NITC-Treated XAD-2,
226-30-18
10 0.1 2OSHA 60M
HPLC/UVN $116
Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Dibutyl Ether
142-96-1
T-01
Charcoal, 226-016 Max 0.01 - 0.2 10
NIOSH 1610 M
GC/FIDA $56
Dibutyl Phthalate
84-74-2
T-56
GFF/Tenax OVS, 226-56TWA 240
STEL 15 1.0 8
OSHA 104
GC/FIDCC $81
C-05
MCEF, 37mm, 0.8um, 3PC 10 - 200 1.0 - 3.0 20NIOSH 5020
GC/FIDA $56
1,1 Dichloroethene See Vinylidene Chloride
2,2-Dichloro-1,1,1-
Trifluoroethane
306-83-2
T-09 (2)
Charcoal, 226-090.25 - 3.0 0.01 - 0.05 40
NIOSH 2516M
GC/FIDI $77
4,5-Dichloro-2-N-Octyl-4-
Isothiazolin-3-one
64359-81-5
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0 0.5
Proprietary,
IHHPLC-P002
HPLC/UV
NC $160Ensure outside of the sampler is clean before capping. Also
known as DCOIT, and RH-287. Sample may also be tested
for 2-n-Octyl-4-Isothiazolin-3-one.
o-Dichlorobenzene
95-50-1
T-01
Charcoal, 226-011 - 60 0.01 - 0.2 10
NIOSH 1003
GC/FIDA $56 Synonym: 1,2-Dichlorobenzene
M-3500
3M POVM, 3500Up to 8 hours 0.0278 15
NIOSH 1003M
GC/FIDA $56 Synonym: 1,2-Dichlorobenzene
p-Dichlorobenzene
106-46-7
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 10
NIOSH 1003
GC/FIDA $56 Synonym: 1,4-Dichlorobenzene
M-3500
3M POVM, 3500Up to 8 hours 0.0278 15
NIOSH 1003M
GC/FIDA $56 Synonym: 1,4-Dichlorobenzene
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com41
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
3,4-Dichlorobenzotrifluo-
ride
328-84-7
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.02-0.2
STEL 0.2 4.8
OSHA Stopgap
GC/FIDA $77
Dichlorodifluoromethane
75-71-8
T-09 (2)
Charcoal, 226-091 - 4 0.01 - 0.05 50
NIOSH 1018
GC/FIDI $77
Two tubes in series. Second tube can be smaller 226-01
tube.
Dichlorodiphenyltrichlo-
roethane (DDT)
50-29-3
C-06
GFF, 37mm, 1um, 3PC100 1.5 0.2
NIOSH S274
GC/ECDS $102
1,1-Dichloroethane
75-34-3
T-01
Charcoal, 226-010.5 - 15 0.01 - 0.2 20
NIOSH 1003
GC/FIDA $56
M-3500
3M POVM 3500Up to 8 hours 0.0332 30
NIOSH 1003M
GC/FIDA $56
1,2-Dichloroethane
107-06-2- $- See Ethylene Dichloride.
1,2-Dichloroethene
540-59-0- $- See 1,2-Dichloroethylene, total.
1,1-Dichloroethene
75-35-4
T-01
Charcoal, 226-012.5 - 7.0 0.01 - 0.2 10
NIOSH 1015
GC/FIDA $56 Synonym; 1,1-Dichloroethylene
M-3500
3M POVM, 3500Up to 8 hours 0.0351 15
NIOSH 1015M
GC/FIDA $56
M-01
SKC POVM, 575-001Up to 8 hours 0.0123 20
NIOSH 1015M
GC/FIDA $56
1,1 Dichloroethylene See Vinylidene Chloride
1,2 Dichloroethylene, Total
(isomer mixture)
M-N566
Assay Technology POVM
AT N566
Up to 8 hours 0.00932 2.0NIOSH 1003M
GC/FIDRR $76
M-N521
Assay Technology POVM
AT N521
Up to 8 hours 0.0722NIOSH 1003M
GC/FIDA $76
M-01
SKC POVM, 575-00115 min. to 8 hours 0.0148 20
NIOSH 1003M
GC/FIDA $76
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com42
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1,2-Dichloroethylene, total
(isomer mixture)
540-59-0, mixture of: trans-
1,2 156-60-5
cis-1,2 156-59-2
T-01
Charcoal, 226-01
0.2 - 5.0 0.01 - 0.2 10NIOSH 1003
GC/FIDA $76 Includes both -cis and -trans isomers.
M-3500
3M POVM 3500Up to 6 hours 0.0352 15
NIOSH 1003M
GC/FIDA $76
Also known as 1.2-Dichloroethene. Includes both -cis and -
trans.
1,1-Dichloro- 1-
fluoroethane
1717-00-6
T-09 (2)
Charcoal, 226-09 0.25 - 3.0 0.01 - 0.05 40NIOSH 2516M
GC/FIDNC $77 Also known as Refrigerant 141b. Two tubes in series.
O-91
Carbosieve S-III,
Orbo 91
1.0 0.05 Max 40OSHA 113
GC/FIDA $77 Also known as Refrigerant 141b. Two tubes in series.
Dichlorofluoromethane
75-43-4
T-09 (2)
Charcoal, 226-090.25 - 3.0 0.01 - 0.05 40
NIOSH 2516
GC/FIDA $77 Also known as Refrigerant 21. Two tubes in series.
Dichloromethane
75-09-2
T-01 (2)
Charcoal, 226-01 0.5 - 3 0.01 - 0.2 10NIOSH 1005
GC/FIDA $56
Also known as Methylene Chloride. Two tubes in series, cap
tubes separately after sampling and label front/rear.
Sample stable for 30 days at 5° C.
O-91
Carbosieve S-III,
Orbo 91
10 Max 0.01 - 0.1 10OSHA 80
GC/FIDNC $56
Also known as Methylene Chloride. Preferred active
sampling method.
M-01
SKC POVM, 575-0018 hours Max 0.0147 20
OSHA 80M
GC/FIDNC $56 Also known as Methylene Chloride.
M-3520
3M POVM 3520,
2-stage
Up to 8 hours
6 Hours Max in High
Humidity (80%)
0.0379 15NIOSH 1005M
GC/FIDA $56 Also known as Methylene Chloride.
4,5-Dichloro-2-N-Octyl-4-
Isothiazolin-3-one
64359-81-5
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0 0.5
IHHPLC-P002
HPLC/UVK $160 Synonyms: Kathon ® 930 Microbiocide, RH-287
Dichloropentafluoropro-
pane Ca & Cb- See Refrigerant 225 and AK225.
Dichloropentafluoropro-
pane- $- See Refrigerant 225 and AK225.
1,2-Dichloropropane
78-87-5- $- See Propylene dichloride.
1,2-Dichloro- 1,1,2,2-Tetra-
fluoroethane
76-14-2
T-09 (2)
Charcoal, 226-091 - 4 0.01 - 0.05 50
NIOSH 1018
GC/FIDI $77
Two tubes in series. Second tube can be smaller 226-01
tube. Synonym: R-114
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com43
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Dichlorvos
62-73-7
T-30-16
GFF/XAD-2 OVS,
226-30-16
120 1.0 0.2OSHA 62M
GC/ECDNC $102
Dicyclopentadiene
77-73-6
T-01
Charcoal, 226-0110.00 0.1 Max 5.0
OSHA 07
GC/FIDA $77
Diesel Exhaust Particulate
(<1 Um In Diameter)
7440-44-0- $- See Elemental Carbon.
Diesel Fuel
68334-30-5
T-01
Charcoal, 226-011 - 20 0.01 - 0.2 50
NIOSH 1550
GC/FIDA $77
Submit 5 ml of bulk in separate shipment with sample
number reference. Also see Kerosene.
Diethanolamine
111-42-2
T-30-18
NITC-Treated XAD-2,
226-30-18
10 0.1 2OSHA PV2018M
HPLCN $116
Store media cold before sampling. Samples are stable at
ambient temperature for at least 15 days.
C-15
GFFs(2) H2SO4-treated,
37mm, 3PC
240 Max 1 Max 1J. Occ. Health,
2012, 54:340-343NC
Limited shelf live for sampler. Store samples in
refrigeration, ship cold overnight. Samples are stable at
least 5 days under refrigeration.
Diethyl Ether
60-29-7- $- See Ethyl Ether.
Diethylamine
109-89-7
T-96
NBD-chloride-treated
XAD-7, 226-96
10 0.2 2OSHA 41
HPLCW $116
T-30-18
NITC-Treated XAD-2,
226-30-18
10 0.1 2NIOSH 2540M
HPLCN $116 Store media cold before sampling.
Diethylaminoethanol
100-37-8
T-10-04
Silica Gel, 226-10-04
24 Max 0.2 Max 1
OSHA Stopgap
(NIOSH 2007M)
GC/NPD
NCCall for
pricing
Samples are subcontracted to outside laboratory.
Immediately after sampling, transfer each section of the
tube to sepa- rate vials containing 2 mL of 0.2 N HCl in
methanol: water (4:1). Obtain prepared vials from lab.
Synonym: 2-(Diethylamine)ethanol
T-98
H3PO4-treated XAD-7,
226-98
20 Max 0.2 Max -OSHA PV2060
GC/FIDNC
Call for
pricing
Store cold if not shipped immediately. Samples are
subcontracted to outside laboratory.
Diethylbenzene
(isomer mixture)
25340-17-4
T-01
Charcoal, 226-0124 Max 0.2 Max 20
NIOSH 1501M
GC/FIDA $56
Diethylene Glycol
111-46-6T-57
GFF/XAD-7 OVS, 226-5760 0.5 - 2.0 20
NIOSH 5523
GC/FIDJJ $77
Store and ship samples cold. Samples are stable at least 14
days. Also see Glycol Profile.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com44
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Diethylene Glycol
Chloroformate
106-75-2
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2 5
AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Diethylene Glycol Dibutyl
Ether
112-73-2
T-01
Charcoal, 226-0110 0.01 - 0.05 20
NIOSH 1403M
GC/FIDE $56
Synonyms: 2-Butoxyethyl ether, also Bis(2-butoxyethyl)
ether, also Dibutyldiglycol
Diethylene Glycol Dimethyl
Ether
111-96-6
T-01
Charcoal, 226-0120 0.2 Max 20
NIOSH 1403M
GC/FIDE $56
Diethylene Glycol Ethyl
Ether Acetate
112-15-2
T-01
Charcoal, 226-0110 0.2 Max 20
NIOSH 1403M
GC/FIDE $56
Diethylene Glycol
Monobutyl Ether
112-34-5
M-3500
3M POVM, 3500 Up to 8 hours 0.0235 30NIOSH 1403M
GC/FIDE $56 Synonym: Butyl Carbitol
T-01
Charcoal, 226-012 - 10 0.01 - 0.05 20
NIOSH 1403M
GC/FIDE $56
Diethylene Glycol
Monobutyl Ether Acetate
124-17-4
T-01
Charcoal, 226-0110 Max 0.2 Max 20
NIOSH 1403M
GC/FIDE $56
Diethylene Glycol
Monoethyl Ether
111-90-0
T-01
Charcoal, 226-01 10 0.01 - 0.05 20NIOSH 1403M
GC/FIDE $56 Synonym: Carbitol
M-3500
3M POVM, 3500Up to 8 hours 0.0233 30
NIOSH 1403M
GC/FIDE $56
Diethylene Glycol
Monomethyl Ether
111-77-3
T-01
Charcoal, 226-01 10 0.2 Max 20NIOSH 1403M
GC/FIDE $56
M-3500
3M POVM, 3500Up to 8 hours 0.0235 30
NIOSH 1403M
GC/FIDE $56
Diethylenetriamine
111-40-0
T-30-18
NITC-Treated XAD-2,
226-30-18
TWA 10
STEL 3 STEL
TW 0.01-0.1
STEL 0.1 2
OSHA 60
HPLC/UVN $116
Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Diethylethanolamine
100-37-8- $- See diethylaminoethanol.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com45
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Diglycidyl Ether of
Bisphenol A
1675-54-3
C-06
GFF, 37mm, 1um, 3PC290 1.6 20
NIOSH P333
HPLCN $116 Store and ship cold after sampling.
Diglyme
111-96-6- $- See Diethylene Glycol dimethyl Ether.
Diisobutyl Ketone
108-83-8
T-01
Charcoal, 226-011 - 10 0.01 - 0.2 20
NIOSH 1300
GC/FIDA $56
T-81
Anasorb 747, 226-81TW 10
STEL 3
TWA 0.03-0.2
STEL 0.2 1
Proprietary,
IHGC-P029
GC/FID
A $77
M-3500
3M POVM, 3500Up to 8 hours 0.0246 30
NIOSH 1300M
GC/FIDA $56
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.010 2
Proprietary,
IHGC-P029
GC/FID
A $77
Diisobutylene
25167-70-8
T-81
Anasorb 747,
226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2 1
Proprietary,
IHGC-P029
GC/FID
A $77Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
M-02
SKC POVM, 575-002TWA 8 hr (Max)
STEL 15 min 0.01 2
Proprietary,
IHGC-P029
GC/FID
A $77
Diisopropylamine
108-18-9
T-30-18
NITC-Treated XAD-2,
226-30-18
10 0.1 5OSHA 60M
HPLCN $116
Dimethoxymethane
109-87-5- $- See Methylal.
Dimethyl Adipate
627-93-0T-01
Charcoal, 226-0110 Max 0.2 20
Proprietary,
IHGC-P036
GC/FID
LL $56Refrigerate samples and ship cold overnight. Analyze within
2 weeks of collection.
Dimethyl Ether
115-10-6- See Methyl Ether
Dimethyl Ethylamine
598-56-1T-10
Silica Gel, 226-103 - 30 0.01 - 1.0 1
NIOSH 2007/2010
GC/FIDNC $- Samples are subcontracted to outside laboratory.
Dimethyl Glutarate
1119-40-0T-01
Charcoal, 226-0110 Max 0.2 20
Proprietary, IHGC-
P036 GC/FIDLL $56
Refrigerate samples and ship cold overnight. Analyze within
2 weeks of collection.
Dimethyl Phthalate
131-11-3
T-56
GFF/Tenax OVS,
226-56
TWA 240
STEL 15 1.0 20
OSHA 104
GC/FIDCC $81 Sample are stable for at least 2 weeks.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com46
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1,1-Dimethyl propyl methyl
ether
994-05-8
- $- See Methyl tert-Amyl Ether.
Dimethyl Succinate
106-65-0T-01
Charcoal, 226-0110 Max 0.2 20
Proprietary,
IHGC-P036
GC/FID
LL $56Refrigerate samples and ship cold overnight. Analyze within
2 weeks of collection.
Dimethyl Sulfate
77-78-1T-115
Porapak-Q, 226-11535 Max 0.05 - 0.2 0.2
Proprietary,
IHGC-P006
GC/ECD
NC $160
Dimethyl Sulfoxide
67-68-5T-09
Charcoal, 226-09
TWA 3-24
STEL 3
TWA 0.05-0.1
STEL 0.2 3.9
OSHA 07
GC/FIDE $56
Dimethylacetamide
127-19-5
T-10
Silica Gel, 226-1015 - 80 0.01 - 1.0 20
NIOSH 2004
GC/FIDK $56
T-01
Charcoal, 226-0110 0.2 5
OSHA 66M
GC/FIDI $56
M-3500
3M POVM, 3500Up to 8 hours 0.0320 30
OSHA 66M
GC/FIDI $56
Dimethylacrylamide
(Vapor)
2680-03-7
T-10
Silica Gel, 226-10120 Max 1.0 Max 3.0
Preliminary HSE
MDHS 57M
HPLC/UV
NC $116Store and ship cold after sampling. Analyze within 2 weeks
of collection.
Dimethylamine
124-40-3
T-96
NBD-chloride-treated
XAD-7, 226-96
10 0.2 2OSHA 34
HPLC UV OR FLW $116
T-30-18
NITC-Treated XAD-2,
226-30-18
20 Max 0.1 Max 4NIOSH 2540M
HPLC/UVN $116
Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Dimethylamine Borane
74-94-2
C-05
MCEF, 37mm, 0.8um, 3PC
TWA 48-480
STEL 45
TWA 1
STEL 3 10.9
NIOSH 7300M
ICPT $40
This test is not chemically specific in that all sources of
Boron will contribute to the total result. On Analysis
Request form specify Boron analysis and request results
reported as PPM Dimethylamine Borane To convert Boron
results to Dimethylamine Borane in the same units,
multiply by 5.45.
N,N-Dimethylamine
75-64-9- $- See Dimethyl Ethylamine.
2-(Dimethylamino)ethanol
108-01-0 - $- See N,N-Dimethylethanolamine
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com47
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
3-Dimethylamino-1-propyl-
amine
109-55-7
T-95
XAD-7, 226-9524 Max 0.05 - 0.10 2
BASF AM-28
GC/FIDK $77
Store samples in freezer. Ship cold overnight within 24
hours of sampling.
N,N-Dimethylaniline
121-69-7
T-10
Silica Gel, 226-103 - 30 0.02 - 1.0 10
NIOSH 2002
GC/FIDM $56
2,3 Dimethyl-2,3-
Dinitrobutane
3964-18-9
T-35-03
Tenax, 226-35-032 - 4 0.02 - 0.05 0.4
NIOSH 2507M
GC/ECDNC $102
N,N-Dimethylethanolamine
108-01-0T-94
XAD-7, 226-94
TWA 10-24
STEL 1.5
TWA 0.02-0.1
STEL 0.1 2
NIOSH 2561M
GC-NPDNC $127
Synonym: N,N-Dimethyl-2-hydroxyethylamine, N,N-Di-
methylethanolamine, DMEA, Jeffcat DMEA
Dimethylformamide
68-12-2
T-10
Silica Gel, 226-1015 - 80 0.01 - 1.0 20
NIOSH 2004
GC/FIDK $56
M-3500
3M POVM, 3500Up to 8 hours 0.0355 7.5
OSHA 66
GC/NPDHH $56
T-01
Charcoal, 226-0110 0.2 1
OSHA 66
GC/NPDKK $127
Dimethylisopropylamine
996-35-0
T-94
XAD-7, 226-9410 - 24 0.02 - 0.1 5
NIOSH 2561M
GC/FIDK $127 Store and ship samples cold.
Dimethyltin Dichloride
753-71-1 T-30-16
GFF/XAD-2 OVS,
226-30-16
TWA 15-75
STEL 15 (Max)
TWA 0.25
STEL 1.0 0.1
NIOSH 5526
GC/FPDNC
Call for
pricing
Note: This is a labor-intensive analysis requiring a
dedicated instrument and there is a 3 sample minimum.
Analysis available for the following agents on one sample:
methyltin dichloride, dimethyltin dichloride, and
trimethyltin chloride. Samples are subcontracted to outside
laboratory.
Di-n-Octyl Phthalate
117-84-0T-56
GFF/Tenax OVS, 226-56240 1.0 50
OSHA 104
GC/FIDCC $81 Synonym: DNOP
Di-sec-Octyl Phthalate
(DOP)
117-81-7
$- See Di(2-Ethylhexyl) Phthalate.
1,4-Dioxane
123-91-1
T-01
Charcoal, 226-010.5 - 15 0.01 - 0.2 10
NIOSH 1602
GC/FIDA $56
M-3500
3M POVM, 3500Up to 8 hours 0.0345 15
NIOSH 1602M
GC/FIDA $56
1,3-Dioxolane
646-06-0
T-01
Charcoal, 226-0115 Max 0.2 Max 10
NIOSH 1602M
GC/FIDA $56 Validated only by recovery study.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com48
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Dipentene, a mixture of
s- and d-limonene isomers
138-86-3 $- See Limonene.
Diphenyl
92-52-4
T-35-01
Tenax RA, 226-35-0130 - 300 1.6 2
NIOSH 2530
GC/FIDNC $56
Diphenyl Ether
101-84-8$- See Phenyl Ether and Phenyl Ether/Diphenyl mixture
Diphenyl Ketone Vapor
119-61-9$- See Benzophenone.
Diphenyl Oxide
101-84-8$- See Phenyl Ether.
Dipropylene Glycol Methyl
Ether
34590-94-8
T-01
Charcoal, 226-01 5 - 10 0.01 - 0.1 20NIOSH 1403M
GC/FIDE $56 Synonym: Dipropylene glycol monomethyl ether
M-3500
3M POVM 3500Up to 8 hours 0.0253 30
NIOSH 1403M
GC/FIDE $56
Dipropylene Glycol Methyl
Ether Acetate
T-01
Charcoal, 226-0110 Max 0.1 Max 20
NIOSH 1403M
GC/FIDE $56
M-3500
3M POVM 3500Up to 8 hours 0.0228 30
NIOSH 1403M
GC/FIDE $56
Divinylbenzene
1321-74-0
T-73
TBC-Treated charcoal,
226-73
12 0.05 7OSHA 89
GC/FIDNC $56
Commercial product routinely contains ethyl vinyl benzene
which may also warrant simultaneous monitoring.
DMAPA
109-55-7$- See 3-Dimethylamine-1-Propylamine.
1-Dodecanethiol
112-55-0$- See n-Dodecyl mercaptan.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com49
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Dodecyl Acrylate
2156-97-0
$- See lauryl Acrylate.
n-Dodecyl Mercaptan
112-55-0
T-10
Silica Gel, 226-10
6 0.4 Max 0.4 Proprietary
IHGC-P042
GC/MS
K $160
tert-Dodecyl Mercaptan
25103-58-6
T-30
XAD-2 Tube, 226-30
6 Ceiling
15 Max
0.4 Max 4 Proprietary
IHGC-P043
GC/MS
HH $160
Dodecyl Methacrylate
142-90-5
$- See Lauryl Methacrylate, C16-C18
DOP
117-81-7
$- See Di(2-Ethylhexyl) Phthalate.
Dowanol DM
111-77-3
$- See 2-(2-Methoxyethoxy) Ethanol
Dowanol DPM
34590-94-8
$- See Dipropylene Glycol Methyl Ether.
Dowanol EB
111-76-2
$- See 2-Butoxy Ethanol.
Dowtherm A
101-84-8 / 92-54-4
$- See Phenyl Ether / Biphenyl Mix.
DPGMEA $- See Dipropylene Glycol Monomethyl Ether Acetate.
Dursban
2921-88-2
$- See Chlorpyrifos.
Dust
Particulates Total
N/A
$- See Particulates, Total.
Dust
Particulates Respirable
N/A
$- See Particulates, respirable.
EEP Solvent
763-69-9
$- See Ethyl-3-Ethoxy Propionate.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com50
page 85
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Elemental Carbon
7440-44-0
C-47
Quartz, heat-treated,
37mm, 3PC,
SKC PN 225-401
150 - 5000 2.0 - 4.0 1.3 NIOSH 5040
EGA/TOA
NC Call lab for
pricing
For mining applications use the cyclone+diesel particulate
matter cassette (jeweled impactor). Suitable cyclones
include the 10mm Dorr-Oliver nylon cyclone and SKC GS-1
conductive plastic cyclone, SKC225-105. The SKC cassette
has been tested for operation at 1.7 and 2.0 Lpm. For non-
mining applications a quartz filter (37 mm) without the
impactor may be used. Also, because more than 95% of
diesel particulates are less than 1 um in size, a size-
selective sampling device (cyclone) is not needed unless
there are other interference’s present, such as coal dust.
Samples are subcontracted to outside laboratory.
Epichlorohydrin
106-89-8
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.05-0.2
STEL 0.2
0.2 Proprietary
IHGC-P014
GC/FID
I $77
T-01
Charcoal, 226-01
2 - 30 0.01 - 0.2 10 NIOSH 1010M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0296 15 NIOSH 1010M
GC/FID
A $56
Ethanethiol
75-08-1
$- See Ethyl Mercaptan.
Ethanol
64-17-5
$- See Ethyl Alcohol.
Ethanolamine
(Monoethanolamine)
141-43-5
T-30-18
NITC-Treated XAD-2,
226-30-18
10 100 cc/min
Max
2 OSHA PV2111 N $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Synonym: 2-Aminoethanol
3-Ethenylpyridine
N/A
T-93
XAD-4, 226-93
600 1.5 Max 0.2 ASTM D5075
GC-NPD
NC $127 Used as indicator for Environmental Tobacco Smoke (ETS).
Store frozen, ship cold. May be sampled on same tube with
nicotine.
2-(2-ethoxy ethoxy) ethanol
111-90-0
$- See Diethylene glycol Monoethyl Ether.
2-Ethoxyethanol
110-80-5
T-01
Charcoal, 226-01
10 - 50 0.1 - 0.5 20 OSHA 79
GC/FID
E $56 Synonym: Cellosolve
M-3500
3M POVM, 3500
Up to 8 hours 0.0324 30 OSHA 79M
GC/FID
E $56
2-Ethoxyethyl Acetate
111-15-9
T-01
Charcoal, 226-01
10 - 50 0.1 - 0.5 20 OSHA 79
GC/FID
E $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0266 30 OSHA 79M
GC/FID
E $56
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com51
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Ethyl Acetate
141-78-6
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1.1 Proprietary
IHGC-P029
GC/FID
A $77
M-3500
3M POVM, 3500
Up to 6 hours
(at PEL Concentration)
0.0345 30 NIOSH 1457M
GC/FID
A $56
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 20 NIOSH 1457
GC/FID
A $56
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min
0.014 2.2 Proprietary
IHGC-P029
GC/FID
A $77
Ethyl Acrylate
140-88-5
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1.2 Proprietary
IHGC-P029
GC/FID
A $77 Preferred active sampling method. Also see Acrylate
Monomer Profile.
M-02
SKC POVM, 575-002
TWA 8hrs (Max)
STEL 15 min
0.014 2.4 Proprietary
IHGC-P029
GC/FID
A $77 Preferred passive sampling method. Also see Acrylate
Monomer Profile.
T-01
Charcoal, 226-01
3 - 10 0.02 - 0.2 20 NIOSH 1450
GC/FID
A $56 Also see Acrylate Monomer Profile.
M-3500
3M POVM, 3500
Up to 8 hours 0.0322 20 NIOSH 1450M
GC/FID
A $56 Also see Acrylate Monomer Profile.
T-73
TBC-Treated charcoal,
226-73
3 - 10 0.02 - 0.2 10 OSHA 92
GC/FID
NC $56 Also see Acrylate Monomer Profile.
Ethyl Alcohol
64-17-5
T-01
Charcoal, 226-01
0.1 - 1 0.01 - 0.2 20 NIOSH 1400
GC/FID
B $56 Ship cold for overnight delivery. Store in freezer.
Synonym: Ethanol
T-82 (2)
Anasorb 747, 226-82,
(2 in series)
5 - 12 0.01 - 0.05 20 OSHA 100
GC/FID
QQ $56
M-3520
3M POVM 3520, 2-stage
1 Hour Max (at PEL) 0.0437 30 NIOSH 1400M
GC/FID
B $56
Ethyl Amyl Ketone
541-85-5
T-01
Charcoal, 226-01
10 - 25 0.01 - 0.2 10 NIOSH 1301M
GC/FID
NC $56
Ethyl Benzene
100-41-4
T-01
Charcoal, 226-01
10 - 24 0.01 - 0.2 10 NIOSH 1501
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0273 15 NIOSH 1501M
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1 Proprietary
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
15 - 480 min. 0.013 2 Proprietary
IHGC-P029
GC/FID
A $77
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com52
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Ethyl Bromide
74-96-4
T-01
Charcoal, 226-01
TWA 24
STEL 3
TWA 0.05-0.1
STEL 0.2
3 OSHA 07
GC/FID
NC $56
Ethyl Chloride
75-00-3
T-09 (2)
Charcoal, 226-09
0.5 - 3 0.02 - 0.05 50 NIOSH 2519
GC/FID
A $77 Synonym: Chloroethane
Ethyl Chloroformate
541-41-3
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Ethyl Cyanoacrylate
7085-85-0
T-98
H3PO4-treated XAD-7,
226-98
12 0.01 - 0.2 10 OSHA 55
HPLC
NC $116 Store samples in freezer or on ice after sampling. Ship cold
(dry ice if possible) by overnight delivery.
Ethyl Ether
60-29-7
T-01
Charcoal, 226-01
0.25 - 3 0.01 - 0.2 20 NIOSH 1610 GC/FID a $56 Ship refrigerated.
T-81
Anasorb 747, 226-81
0.25 - 3 0.01 - 0.2 20 OSHA Stopgap
GC/FID
NC $56 Ship refrigerated.
M-3520
3M POVM 3520, 2-stage
Up to 4 hours 0.0368 30 NIOSH 1610M
GC/FID
A $56 Ship refrigerated.
Ethyl-3-Ethoxy Propionate
763-69-9
T-01
Charcoal, 226-01
5 - 10 0.01 - 0.1 20 OSHA PV2025
GC/FID
F $56
Ethyl Formate
109-94-4
T-01
Charcoal, 226-01
10 0.2 10 NIOSH 1452
GC/FID
A $56
2-Ethyl-1- Hexanol
104-76-7
T-01
Charcoal, 226-01
10 - 60 0.01 - 0.2 20 OSHA CSI
GC/FID
I $56
Ethyl Lactate
97-64-3
T-81
Anasorb 747, 226-81
TWA 6-24
STEL 3
TWA 0.05-0.1
STEL 0.2
3.4 OSHA 07
GC/FID
E $56
T-01
Charcoal, 226-01
10 Max 0.2 Max 20 OSHA PV2081
GC/FID
E $56
Ethyl Mercaptan
75-08-1
C-48
GFF, Hg Acetate-Treated,
37mm, 2PC,
SKC PN 225-9007
10-150 0.1-0.2 4 NIOSH 2542M
HPLC
NC $- Samples are subcontracted to outside laboratory. Store
samplers cold before use. Collected samples are stable for
15 days at 25°C.
Ethyl Styrene
28106-30-1
T-73
TBC-Treated charcoal,
226-73
TWA 12
STEL 3.75
TWA 0.05
STEL 0.25
6 OSHA 89
GC/FID
CC $56
Ethyl-2-Hydroxypropionate
97-64-3
$- See Ethyl lactate.
Ethylamine
75-04-7
T-30-18
NITC-Treated XAD-2,
226-30-18
10 Max 0.2 Max 3 OSHA 60M
HPLC
N $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com53
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Ethylene Chlorohydrin
107-07-3
T-81A
Anasorb 747, 226-81
2 - 35 0.01 - 0.2 20 NIOSH 2513M
GC/FID
D $56
Ethylene Dibromide
106-93-4
T-01
Charcoal, 226-01
8 - 10 0.02 - 0.2 0.5 NIOSH 1008M
GC/ECD
NC $102
Ethylene Dichloride
107-06-2
T-01
Charcoal, 226-01
1 - 50 0.01 - 0.2 10 NIOSH 1003
GC/FID
A $56 Synonym: 1,2-Dichloroethane
M-3500
3M POVM, 3500
Up to 8 hours 0.0332 15 NIOSH 1003M
GC/FID
A $56
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.02-0.2
STEL 0.2
0.14 IHGC-P028
GC/FID
A $77
M-01
SKC POVM, 575-001
20 - 480 min 0.01 0.28 IHGC-P029
GC/FID
A $77
M-N566
Assay Technology N566
Up to 8 hours 0.00922 2.0 NIOSH 1003M
GC/FI
RR $56
Ethylene Glycol
107-21-1
T-57
GFF/XAD-7 OVS, 226-57
5 - 60 0.5 - 2.0 20 NIOSH 5523
GC/FID
JJ $77 Store samples cold, and ship samples cold overnight.
Ethylene Glycol Monobutyl
Ether
111-76-2
$- See 2-Butoxyethanol.
Ethylene Glycol Monobutyl
Ether Acetate
112-07-2
$- See 2-Butyoxylethyl Acetate
Ethylene Glycol Monoethyl
Ether
110-80-5
$- See 2-Ethoxyethanol.
Ethylene Glycol Monoethyl
Ether Acetate
111-15-9
$- See 2-Ethoxyethyl Acetate.
Ethylene Glycol
Monomethyl Ether Acetate
110-49-6
$- See 2-Methoxyethyl Acetate
Ethylene Glycol
Monomethyl Ether
109-86-4
$- See 2-Methoxyethanol.
Ethylene Glycol
Monopropyl Ether
2807-30-9
T-01
SKC Charcoal Tube,
226-01
10 Max 0.2 Max 20 NIOSH 1403M
GC/FID
E $56 See 2-Propoxyethanol
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com54
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Ethylene Oxide
75-21-8
M-06
SKC Ethylene Oxide PM,
575-005
15 min - 8 hours 0.0212 3 OSHA 1010M
GC/ECD
NC $102 Store sampling media cold. Store collected samples cold if
not shipped to the lab immediately after sampling. Ship
cold overnight.
T-178
HBR-treated
Anasorb 747, 226-178
TWA 12
STEL 0.75
0.05 2 OSHA 1010M
GC/ECD
NC $102 Store sampling media cold. Store collected samples cold if
not shipped to the lab immediately after sampling. Ship
cold overnight.
Ethylenediamine
107-15-3
T-30-18
NITC-Treated XAD-2,
226-30-18
TWA 12
STEL 3
TWA 0.025-0.1
STEL 0.2
3 OSHA 60
HPLC/UV
N $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Ethylene Thiourea
96-45-7
C-56
GFFs(2), 37mm, 4PC
480 Max 2 Max 1 OSHA 95M
HPLC/UV
NC $138
Ethylhexanoic Acid
149-57-5
T-10-03
Prewashed Silica Gel,
226-10-03
24 Max 0.2 Max 10 OSHA Stopgap
GC/FID
N $77
2-Ethylhexyl Acrylate
103-11-7
M-02
SKC POVM, 575-002
TWA 8 hrs
STEL 1.5 hrs (Min)
0.01 15 Proprietary
IHGC-P029
GC/FID
A $77
T-81
Anasorb 747, 226-81
TWA 10 TWA 0.03-0.2 2.8 Proprietary
IHGC-P029
GC/FID
A $77
Ethylhexyl Chloroformate
24468-13-1
T-153
Amine-treated XAD-2, 226-
153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
2-Ethylhexylnitrate
27247-96-7
T-09
SKC 226-09
2-48 0.1 - 0.2 5.0 Ethyl DII-3
10/29/89
GC/FID
A Tube capacity is approximately 1 mg of 2-ethylhexylnitrate.
No special handling requirements have been established.
Ethylvinylbenzene
28106-30-1
$- See Ethyl Styrene.
Fiber Count, Total
N/A
C-01
MCEF, 25mm, 0.8um, 3PC,
long cowl
480 - 1000
(adjust total volume to
optimize filter lading; see
reference method online)
0.5 - 16.0 Approx. 3100
F/F
NIOSH 7400,
A Rules PCM
NC $17 Sample open faced on black conductive cowled cassette.
Primary asbestos fiber counting method. ANALYSIS IS NOT
SPECIFIC FOR FIBER TYPE. Specify "A" counting rules when
exposure may contain asbestos. Specify "B" counting rules
when exposure a) does not contain asbestos, and b) may
contain certain man-made mineral fibers of larger
dimensions, such as synthetic vitreous fibers. Follow-up
analysis of the same filter by NIOSH Method 7402 (TEM)
can be used to provide differentiation of fiber types.
Fiber Count, Total
(“B” counting rules for
non-asbestos fibers)
N/A
C-01
MCEF, 25mm, 0.8um, 3PC,
long cowl
480 - 1000 0.5 - 16.0 Approx. 3100
F/F
NIOSH 7400,
B Rules PCM
NC $16 Sample open faced on black conductive cowled cassette.
“B” rules are used for counting certain non-asbestos fibers.
ANALYSIS IS NOT SPECIFIC FOR FIBER TYPE. Follow-up
analysis of the same filter by NIOSH Method 7402 (TEM)
can be used to provide differentiation of fiber types.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com55
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Fibrous Glass
(Synthetic Vitreous)
N/A
C-01
MCEF, 25mm, 0.8um, 3PC,
long cowl
480 0.5 - 16.0 Approx. 3100
F/F
NIOSH 7400,
B Rules PCM
NC $17 Sample open faced on black conductive cowled cassette.
“B” rules are used for counting certain non-asbestos fibers.
ANALYSIS IS NOT SPECIFIC FOR FIBER TYPE. Follow-up
analysis of the same filter by NIOSH Method 7402 (TEM)
can be used to provide differentiation of fiber types.
Fluoranthene
206-44-0
K-06
PTFE + ORBO 43
200-1000 2 3 NIOSH 5506
HPLC
N $116 Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Fluorene
86-73-7
K-06
PTFE + ORBO 43
200-1000 2 3 NIOSH 5506
HPLC
N $116 Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Fluorides,
Gaseous Only
16984-48-8
C-13
MCE/Treated Backup,
37mm, 3PC
50 - 800 1.0 - 2.0 5 NIOSH 7902
ISE
NC $69 Prefilter may be tested for particulate from of fluoride if
desired.
Fluorides,
Particulate Only
16984-48-8
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 800 1.0 - 2.0 5 NIOSH 7902
ISE
NC $81 Sample on C-13 cassette to test both gaseous and
particulate fluorides on a single sampler.
Fluorides, Total
16984-48-8
C-13
MCE/Treated Backup,
37mm, 3PC
50 - 800 1.0 - 2.0 10 NIOSH 7902
ISE
NC $150 Reporting includes separate results for gaseous fluoride,
particulate fluoride, and total fluoride
Forane
26675-46-7
T-81
Anasorb 747, 226-81
20 0.05 10 OSHA 103
GC/FID
A $56 Synonym: Isoflurane
M-02
SKC POVM, 575-002
Up to 8 hours 0.0137 20 OSHA 103M
GC/FID
A $56
M-3520
3M POVM 3520, 2-stage
Up to 8 hours 0.0283 10 OSHA 103M
GC/FID
A $56
Formaldehyde
50-00-0
T-119
DNPH-Treated Silica Gel,
226-119
2 - 30 0.03 - 1.0 0.1 NIOSH 2016
HPLC
N $91 Preferred active sampling method. Refrigerate before and
after sampling and ship overnight. For STEL sampling,
collect a 15-minute sample at 1 LPM. Ozone may interfere -
use ozone scrubber in known ozone contaminated areas.
Any ketone or aldehyde will react with the DNPH and is a
potential interference. Large concentrations of acetone or
MEK will compete with the aldehyde and are therefore
potential negative interferences. Media contains residual
acetonitrile which could interfere with acetonitrile
monitoring.
Formaldehyde
Short Term
50-00-0
T-54
HMP-treated XAD- 2,
226-54
3 0.2 0.5 OSHA 52
GC/NPD
CC $91 For STEL sampling, collect a 15-minute sample at 0.2 LPM.
Keep fresh tubes in refrigerated storage. Sample using
same lot number for all samples. Field blank submission is
very important.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com56
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Formaldehyde
Long Term
50-00-0
T-117
HMP-Treated XAD-2,
226-117
24 0.1 0.5 OSHA 52
GC/NPD
CC $91 Keep fresh tubes in refrigerated storage. Sample using
same lot number for all samples. Field blank submission is
very important.
Formaldehyde
50-00-0
UMEX-100
SKC UMEX Aldehyde
PM 500-100
Up to 8 hours 0.0286 0.1 NIOSH 2016M
HPLC
NC $91 Preferred passive sampler for formaldehyde. OSHA reports
sampling rate bias for all diffusional formaldehyde
samplers when exposure source is methanol-stabilized
formalin. Any ketone or aldehyde will react with the DNPH
and is a potential interference. May be used for 24-hour
IAQ sampling. Large concentrations of acetone or MEK will
compete with the aldehyde and are therefore potential
negative interferences. Refrigerate before and after
sampling and ship overnight. Passive monitor cost is not
included in price. Samples may be stored up to 3 weeks if
refrigerated.
M-ATN571
Assay Aldehyde
PM ATN571
Up to 8 hours 0.01305 0.1 NIOSH 2016M
HPLC
NC $91
M-3721
3M Formaldehyde
PM 3721
Up to 8 hours 0.0614 2 NIOSH 3500M
SPEC
NC $91 Not suitable for short-term measurements. Submission of
field blank is strongly recommended.
Formaldehyde
50-00-0
IMP-02
Impinger, 1% Sodium
Bisulfite
1 - 100 0.2 - 1.0 2.5 NIOSH 3500M
SPEC
NC $91
Formaldehyde in Dust
50-00-0
Call lab IOM sampler 240 - 1050 2 4 NIOSH 5700
HPLC/UV
NC $160 Transfer IOM cassette to bottle after sampling, store and
ship cold.
Formamide
75-12-7
T-10
Silica Gel, 226-10
TWA 10
STEL 3
TWA 0.02-0.1
STEL 0.2
2 OSHA Stopgap
GC/NPD
K $127
T-10-03
Prewashed Silica Gel,
226-10-03
TWA 10
STEL 3
TWA 0.02-0.1
STEL 0.2
5 OSHA Stopgap
GC/NPD
K $127
Formic Acid
64-18-6
T-10-03
Prewashed Silica Gel,
226-10-03
1 - 24 0.05 - 0.2 5 NIOSH 2011
IC
V $69 PTFE prefilter (C-29) required in presence of formate salts;
discard cassette unless formic acid salts are to be
measured. Acetic acid can also be measured on the same
sample.T-01
Charcoal, 226-01
48 Max 0.2 Max 5 OSHA ID186 SG
IC
V $69 Store cold after sampling. Ship cold overnight for analysis
within 7 days of collection (82% recovery at 2 weeks of cold
storage). Use prefilter (C-29) if formate salts are present.
Acetic acid can also be measured on the same sample.
Submission of a field blank is essential.
Formic Acid Methyl Ester
107-31-3
$- See methyl formate.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com57
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Freon
N/A
$- See Individual Refrigerants
Fuel Oil See Kerosene.
Furfural
98-01-1
M-3500
3M POVM, 3500
Up to 8 hours 0.0343 20 OSHA 07M
GC/FID
I $56
T-117
HMP-Treated XAD-2,
226-117
1 - 12 0.01 - 0.05 50 NIOSH 2529
GC/FID
CC $77
Furfuryl Alcohol
98-00-0
T-115
Porapak-Q, 226-115
3 - 25 0.01 - 0.05 40 NIOSH 2505
GC/FID
NC $77
Gallium
12024-21-4
C-05
MCEF, 37mm, 0.8um,
3PC
1920 4 2.7 OSHA ID206
ICP
NC $77 NIOSH 7300 determines the amount of Gallium metal. Not
suitable for analysis of highly-insoluble gallium oxide.
Gasoline
8006-61-9
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 75 NIOSH 1550M
GC/FID
A $77
M-3500
3M POVM, 3500
Up to 8 hours 0.0305 75 NIOSH 1550M
GC/FID
A $77
Glass Fibers/ Synthetic
Vitreous Fibers
N/A
$- See Fiber Count, Synthetic
Glutaraldehyde
111-30-8
T-119
DNPH-Treated Silica Gel,
226-119
1 - 30 0.05 - 0.5 0.2 NIOSH 2532
HPLC/UV
N $116 Any ketone or aldehyde will react with the DNPH and is a
potential interference. Large concentrations of acetone or
MEK will compete with the aldehyde and are therefore
potential negative interferences. Refrigerate before and
after sampling and ship overnight. The C-20 treated filter
sampler should be used if there is aerosol exposure
potential.
C-20
GFFs (2), DNPH-treated,
37mm, 4PC
30-480 2 0.4 OSHA 64
HPLC/UV
N $116 Sample open faced. Any ketone or aldehyde will react with
the DNPH and is a potential interference. Large
concentrations of ozone, acetone or MEK will compete with
the aldehyde and are therefore potential negative
interferences. Refrigerate before and after sampling and
ship overnight. Minimum media order of 10 units.
UMEx-100
SKC UMEx Aldehyde PM,
500-100
Up to 8 hours 0.014 0.2 NIOSH
2532M
N $116
Glycidyl Methacrylate
106-91-2
T-09
Charcoal, 226-09
TWA 24
STEL 3
TWA 0.05-1
STEL 0.2
4.3 OSHA 07
GC/FID
A $77
Glycolic Acid
79-14-1
C-44
GFF Type A/B, 37mm, 1um,
3PC
300 Max 0.2 - 2.0 20 Proprietary
IHIC-P001
IC/Cond.
NC $86 Synonym: Hydroxyacetic Acid
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com58
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
GMAA
79-41-4
$- See Methacrylic Acid
Goal® Herbicide
42874-03-3
C-10
PVC, 37mm, 5um, 3PC
TWA 96
STEL 30
TWA 0.2
STEL 2.0
2 IN-HOUSE
HPLC/UV
N $145
Gold
7740-57-5
C-05
MCEF, 37mm, 0.8um,
3PC
200-400 1 - 2 2 NIOSH 7300M
ICP
NC
Graphite
7782-42-5
C-10
PVC, 37mm, 5um, 3PC
100 - 500 1.0 - 3.0 100 NIOSH 7500M
XRD
W $127 Quartz is a direct positive interference.
Graphite
Bulk
7782-42-5
2 - 5 grams 1% NIOSH 7500M
XRD
$127
Halothane
151-67-7
T-81
Anasorb 747, 226-81
12 Max 0.05 Max 75 OSHA 103
GC/FID
A $56
M-3520
3M POVM 3520, 2-stage
Up to 8 hours 0.0302 75 OSHA 103M
GC/FID
A $56
HCFC 225
135151-96-1
$- See Refrigerant 225 ca & cb. Also known as AK 225 ™ and
dichloropentafluoropropane.
HCFC-123
306-83-2
$- See 2,2-Dichloro-1,1.1-Trifluoroethane
HDI
822-06-0
$- See Hexamethylene Diisocyanate
HDI Homopolymer
28182-81-2
$- See Hexamethylene Diisocyanate Homopolymer
Heptachlor
76-44-8
T-30-16
GFF/XAD-2 OVS,
226-30-16
60 1 1 OSHA CSI
GC/ECD
NC $102 Also see Chlorinated Pesticide Profile.
Heptane
142-82-5
T-01
Charcoal, 226-01
4 - 10 0.01 - 0.2 10 NIOSH 1500
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0289 15 NIOSH 1500M
GC/FID
A $56
2-Heptanone
110-43-0
$- See Methyl n-amyl Ketone
Heptyl Acetate
90438-79-2
T-01
Charcoal, 226-01
5 - 10 0.05 - 0.2 5 NIOSH 1450M
GC/FID
A $56 Component of DuPont products Axarel TM and Optisol In-
Line.
Heptyl Alcohol
70914-20-4
T-01
Charcoal, 226-01
5 - 10 0.05 - 0.2 5 NIOSH 1402 GC/FID A $56 Component of Optisol TM - a DuPont product
Heptyl Alcohol + Isomers
70914-20-4
T-01
Charcoal, 226-01
5 - 10 0.05 - 0.2 5 NIOSH 1402M
GC/FID
D $56 Component of Optisol TM - a DuPont product
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com59
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Hexachlorocyclopentadi-
ene
77-47-4
T-116,
2 tubes in series
Porapak-T, 226-116
TWA 6-90
STEL 6
TWA 0.01-0.2
STEL 0.2
0.03 NIOSH 2518
GC/ECD
NC $102 Cap tubes separately after sampling. Store refrigerated in
dark.
1,1,1,3,3,3-
Hexachloropropane
3607-78-1
T-59-04
Porapak R, 226-59-04
1 - 10 0.01 - 0.2 0.1 NIOSH 2517
GC/ECD
NC $102
Hexamethylcyclotrisilox-
ane
541-5-9
T-09
Charcoal, 226-09
TWA 96
STEL 30
TWA 0.2
STEL 2.0
16 IHGC-P040
GC/FID
A $77 Store samples in freezer, ship cold overnight.
1,6-Hexamethylene
Diisocyanate
822-06-0
C-14
cassette or K-20 kit;
see comments at right
15 - 240 1 0.12 OSHA 42
HPLC/FL
O $116 Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com60
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Hexamethylene
Diisocyanate Homopolymer
28182-81-2
C-14
cassette or K-20 kit;
see comments at right
15 - 240 1 Max 2 OSHA PV2125
HPLC/UV
O $116 Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
Hexamethylenediamine
124-09-4
T-30-18
NITC-Treated XAD-2,
226-30-18
12 0.1 2 OSHA Stopgap
HPLC
N $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
1,b-Hexanedioldiacrylate
1348-33-4
T-110
Chromosorb 106,
226-110
48 Max 0.2 Max 20 OSHA PV2133
GC/FID
HH $56
n-Hexane
110-54-3
T-01
Charcoal, 226-01
4 - 10 0.01 - 0.2 10 NIOSH 1500
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.032 15 NIOSH 1500M
GC/FID
A $56
Hexane, isomers, other
than n-Hexane
75-83-2; 79-29-8;
96-14-0; 107-83-5
T-01
Charcoal, 226-01
4 - 10 0.01 - 0.2 10 NIOSH 1500
GC/FID
A $77
M-3500
3M POVM, 3500
Up to 8 hours 0.032 15 NIOSH 1500M
GC/FID
A $77
2-Hexanone
591-78-6
$- See Methyl butyl Ketone
Hexone
108-10-1
$- See Methyl Isobutyl ketone (MIBK)
Hexylene Glycol
107-41-5
T-01
Charcoal, 226-01
3 - 20 0.05 - 0.2 20 OSHA Stopgap
GC/FID
E $56
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com61
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
HFE 7100 $- See Perfluorobutyl Methyl Ether
High Flash Aromatic
Naphtha
N/A
$- See Aromatic 100
HMDI
5124-30-1
$- See Methylene Bis(4-Cyclohexylisocyanate).
Hydrazine
302-01-2
C-15
GFFs (2), H2SO4-treated,
37mm, 3PC
240 1 0.1 OSHA 108
HPLC
NC $116 Preferred method. Store samples cold if not shipped
immediately. Samples are stable for up to 19 days at
ambient temperature (60 - 80°F).
T-42-02
H2SO4-treated Firebrick,
226-42-02
10 - 20 0.1 - 1.0 0.08 OSHA 20
HPLC
NC $116
Hydrobromic Acid
10035-10-6
$- See Hydrogen Bromide
Hydrocarbons, Total
as n-Hexane
N/A
T-01
Charcoal, 226-01
20 - 50 0.01 - 0.2 50 NIOSH 1500
GC/FID
A $77 Commonly used to measure Volatile Organic Compounds
(VOCs); instrument response to hexane is used for a
cumulative estimation of all compounds that 1) collect on
charcoal, 2) desorb in CS2, and 3) respond to FID under the
chromatographic conditions applied. Light hydrocarbons
may break through with high (>10L) air volumes.
M-3500
3M POVM, 3500
Up to 8 hours 0.032
(published rate
for hexane)
75 NIOSH 1500M
GC/FID
A $77 Commonly used to measure Volatile Organic Compounds
(VOCs); instrument response to hexane is used for a
cumulative estimation of all compounds that 1) collect on
charcoal, 2) desorb in CS2, and 3) respond to FID under the
chromatographic conditions applied. Light hydrocarbons
may break through with high (>10L) air volumes. Light
hydrocarbons may require sampling with 3M 3520.
M-01
SKC POVM, 575-001
Up to 8 hours 0.0143
(published rate
for hexane)
100 NIOSH 1500M
GC/FID
A $77 Commonly used to measure Volatile Organic Compounds
(VOCs); instrument response to hexane is used for a
cumulative estimation of all compounds that 1) collect on
charcoal, 2) desorb in CS2, and 3) respond to FID under the
chromatographic conditions applied. Light hydrocarbons
may require sampling with 3M 3520.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com62
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Hydrocarbons, Total as
n-Hexane, High Resolution
N/A
T-01
Charcoal, 226-01
5 - 20 0.01 - 0.2 20 NIOSH 1500
GC/FID
A $127 Commonly used to measure Volatile Organic Compounds
(VOCs); instrument response to hexane is used for a
cumulative estimation of all compounds that 1) collect on
charcoal, 2) desorb in CS2, and 3) respond to FID under the
chromatographic conditions applied. The five most
abundant compounds will be identified as TICs (Tentatively
Identified Compounds, based upon GC-MS library search)
in samples that meet or exceed the FID LOQ.
M-3500
3M POVM, 3500
Up to 8 hours 0.032 (pub-
lished rate for
hexane)
30 NIOSH 1500M
GC/FID
A $127 Commonly used to measure Volatile Organic Compounds
(VOCs); instrument response to hexane is used for a
cumulative estimation of all compounds that 1) collect on
charcoal, 2) desorb in CS2, and 3) respond to FID under the
chromatographic conditions applied. The five most
abundant compounds will be identified as TICs (Tentatively
Identified Compounds, based upon GC-MS library search)
in samples that meet or exceed the FID LOQ.
M-01
SKC POVM, 575-001
Up to 8 hours 0.0143
(published rate
for hexane)
40 NIOSH 1500M
GC/FID
A $127 Commonly used to measure Volatile Organic Compounds
(VOCs); instrument response to hexane is used for a
cumulative estimation of all compounds that 1) collect on
charcoal, 2) desorb in CS2, and 3) respond to FID under the
chromatographic conditions applied. The five most
abundant compounds will be identified as TICs (Tentatively
Identified Compounds, based upon GC-MS library search)
in samples that meet or exceed the FID LOQ.
Hydrochloric Acid
7647-01-0
$- See Hydrogen Chloride. Also see Acid Mist Profile.
Hydrogen Bromide
10035-10-6
C-68
Na2CO3-treated Quartz,
37mm, 3 PC
30-600 2.0 5 NIOSH 7907
IC/COND
SS Stable 1 week at 20°C, stable to at least 28 days at 4°C.
T-10-03
Prewashed Silica Gel
226-10-03
TWA 96
STEL 7.5
TWA 0.5 Max
STEL 0.5
5 OSHA ID 165SG
IC/COND
Samples are stable at least 21 days.
T-10-03
Prewashed Silica Gel,
226-10-03
3 - 100 0.2 - 0.5 5 NIOSH 7903
IC
U $69 NIOSH now describes NIOSH Method 7903 as a “historical”
method and does not recommend its use, advocating
instead for a series of filter methods which provide
improved sensitivity and the opportunity for size-selective
sampling of aerosols. NIOSH’s intention is not to invalidate
results developed using NIOSH 7903 in the past, but to
instead transition users to the newer filter methods. See
Hydrogen Bromide. Also see Acid Mist Profile.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com63
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Hydrogen Chloride
7647-01-0
C-68
Na2CO3-treated Quartz,
37mm, 3 PC
30-600 2.0 10 NIOSH 7907
IC/COND
SS Stable 1 week at 20°C, stable to at least 28 days at 4°C.
T-10-03
Prewashed Silica Gel,
226-10-03
TWA 96
STEL 7.5
TWA 0.5 Max
STEL 0.5
2.5 OSHA ID174SG
IC/COND
U $69 Samples are stable at ambient temperature for at least 21
days.
T-10-03
Prewashed Silica Gel,
226-10-03
3 - 100 0.2 - 0.5 2.5 NIOSH 7903
IC
U $69 NIOSH now describes NIOSH Method 7903 as a “historical”
method and does not recommend its use, advocating
instead for a series of filter methods which provide
improved sensitivity and the opportunity for size-selective
sampling of aerosols. NIOSH’s intention is not to invalidate
results developed using NIOSH 7903 in the past, but to
instead transition users to the newer filter methods. Also
see Acid Mist Profile. Synonyms: Hydrochloric acid, muriatic
acid.
Hydrogen Cyanide
74-90-8
T-28
Soda Lime, 226-28
2 - 90 0.2 2.6 NIOSH 6010M
ISE
NC $81 Before sampling, remove glass wool plug that precedes
glass fiber filters (holds filter in place at front of sorbent
during shipping). No need to replace the glass wool; only
used to keep the filter in place during shipping.
Hydrogen Fluoride
7664-39-3
T-10-03
Prewashed Silica Gel,
226-10-03
3 - 100 0.2 - 0.3 5 NIOSH 7903
IC
U $69 NIOSH now describes NIOSH Method 7903 as a “historical”
method and does not recommend its use, advocating
instead for a series of filter methods which provide
improved sensitivity and the opportunity for size-selective
sampling of aerosols. NIOSH’s intention is not to invalidate
results developed using NIOSH 7903 in the past, but to
instead transition users to the newer filter methods. See
also Fluorides, Gaseous for alternate filter/cassette
sampling method. Also see Acid Mist Profile.
C-13
MCE/Treated Backup,
37mm, 3PC
50 - 800 1 -2 5.3 NIOSH 7902
ISE
NC $69
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com64
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Hydrogen Peroxide
7722-84-1
IMP-13
Midget Fritted? Glass
Bubbler, 15 mL TiOSO4
reagent
100 0.5 2
(varies with
solution
volume)
OSHA VI-6
Color
NC $100 Request 20 mL sampling solution and one V-40 vial per
sample and blank from laboratory. Must send blank
solution for correction. Positive interferences can be
expected from any compounds that liberate H2O2 on acid
hydrolysis. Negative interferences are a function of the
reactivity of H2O2 with other compounds present in the air
samples. Dangerous goods shipping requirement. Sampling
solution shelf-life is 1 month. Samples are stable for 1
month after collection.
C-73
TiOSO4-treated
Quartz (2), 25mm
30 - 40 1 -2 LPM for
vapor and mist
4.5 OSHA 1019 NC After sampling, wrap cassette in aluminum foil to protect
from light. Foil-wrapped samples are stable at least 2
weeks. Submit samples to lab as soon as possible after
sampling. If delayed shipping is unavoidable, store samples
under refrigeration.
Hydrogen Sulfide
7783-06-4
T-177
Silvered Silica Gel,
226-177
TWA 12
STEL 7.5
0.05 Max
0.5 Max
8.8 OSHA 1008
IC
NC $116 Preferred method. Store media and samples cold, ship
overnight.
K-04
Low SO4 Charcoal (Lrg.
Orbo 34) + PTFE prefilter to
remove sulfate particulates
(if present)
2 - 40
(established at 10 ppm,
see notes at right)
0.1 - 1.5 7.1 NIOSH 6013
IC
NC $69 Do not send filter to lab unless measurement of particulate
sulfates/sulfides is required. Breakthrough volume
sampling in a low humidity 1 ppm atmosphere is 420 liters;
capacity increases in high humidity atmosphere.
Hydrogenated Terphenyl
61788-32-7
C-08
PTFE, 37mm, 2um, 3PC
30 Max 3 Max 100 OSHA Stopgap
GC/FID
NC $77 Immediately after sampling, transfer filter and backup pad
into small glass vial for shipping.
Hydroquinone
123-31-9
C-05
MCEF, 37mm, 0.8um, 3PC
30 - 180 1.0 - 4.0 2 NIOSH 5004
HPLC
NC $116 Place filter in glass vial containing 10 ml of 1% acetic acid
immediately after sampling.
Hydroquinone monomethyl
ether
150-76-5
C-10
PVC, 37mm, 5um, 3PC
20 0.05 - 2 4 IH HPLC-P006
HPLC/UV
K $160
Hydroquinone (Vapor)
123-31-9
T-98
H3PO4-treated XAD-7,
226-98
20 Max 0.2 Max 2 OSHA Stopgap
HPLC
NC $116
Hydroxy Ethyl Acrylate
818-61-1
T-15
Silica Gel, 226-15
TWA 30
STEL 7.50
TWA 0.25-0.5
STEL 0.5
6 IN-HOUSE
GC/FID
KK $77 Store in freezer after sampling. Ship cold overnight.
Hydroxy Ethyl Methacrylate
868-77-9
T-15
Silica Gel, 226-15
TWA 30
STEL 7.50
TWA 0.25-0.5
STEL 0.5
7 IN-HOUSE
GC/FID
KK $77 Store in freezer after sampling. Ship cold overnight.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com65
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
2-Hydroxypropyl Acrylate,
Mixture of Isomers
25584-83-2
T-15
Silica Gel, 226-15
TWA 30
STEL 7.50
TWA 0.05-0.5
STEL 0.5
6.2 IN-HOUSE
GC/FID
KK $77 Store in freezer after sampling. Ship cold overnight.
2-Hydroxypropyl
Methacrylate
27813-02-1
T-15
Silica Gel, 226-15
TWA 30
STEL 7.50
TWA 0.05-0.5
STEL 0.5
6 IN-HOUSE
GC/FID
KK $77 Store in freezer after sampling. Ship cold overnight.
Indeno(1,2,3-cd)pyrene
193-39-5
K-06
PTFE + ORBO 43
200-1000 2 3 NIOSH 5506
HPLC
N $116 Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Indium Oxide
1312-43-2
C-05
MCEF, 37mm, 0.8um, 3PC
2000 Max 4 2.4 NIOSH 7300M
ICP
T $77 NIOSH 7300 determines the amount of Indium metal.
Multiply Indium amount by 1.21 to obtain results expressed
as Indium Oxide.
Iodine
(NO iodide compounds
present)
7553-56-2
T-80
KOH-treated Anasorb 747,
226-80
2.5 - 7.5 (Ceiling) 0.5 OSHA ID212
IC
NC Call for
pricing
If relative humidity is >50% sample using alternate
impinger method to avoid iodine loss. See next entry if
particulate iodide compounds are present. Ship
immediately via overnight carrier. Efficient collection of 0.7
ppm atmosphere at 0.5 LPM for up to 30 minutes was
demonstrated. Analysis is subcontracted to outside
laboratory.Iodine
(iodide compounds present)
7553-56-2
T-142
PTFE/KOH-treated Anasorb
747 OVS,
226-142
2.5 - 7.5 (Ceiling) 0.5 OSHA ID212
IC
NC Call for
pricing
If relative humidity is >50% sample using alternate
impinger method to avoid iodine loss. This sampler
includes a prefilter to remove interfering iodide
compounds. Ship immediately via overnight carrier.
Efficient collection of 0.7 ppm atmosphere at 0.5 LPM for
up to 30 minutes was demonstrated. Samples are
subcontracted to outside laboratory.
IPDI
4098-71-9
$- See entry for Isophorone Diisocyanate.
Iron Oxide
1309-37-1
C-05
MCEF, 37mm, 0.8um, 3PC
200 - 2000 1.0 - 4.0 2.86 NIOSH 7300
ICP
T $40 Limit air volume sampled as necessary to prevent
overloading filter.
Isoamyl Acetate
123-92-2
T-01
Charcoal, 226-01
1 -10 0.01 - 0.2 20 NIOSH 1450
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0272 30 NIOSH 1450M
GC/FID
A $56
Isoamyl Alcohol
123-51-3
T-01
Charcoal, 226-01
1 -10 0.01 - 0.2 20 NIOSH 1402
GC/FID
D $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0323 30 NIOSH 1402M
GC/FID
D $56
Isobornyl Acrylate
5888-33-5
T-01
Charcoal, 226-01
4 0.001 - 0.3 40 IHGC-P018
GC/FID
A $77
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com66
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Isobornyl Methacrylate
7534-94-3
T-01
Charcoal, 226-01
3 0.01-0.3 80 IHGC-P018
GC/FID
A $77
Isobutyl Acetate
110-19-0
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 20 NIOSH 1450
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.031 30 NIOSH 1450M
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1.1 Proprietary
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min
0.01 2.1 Proprietary
IHGC-P029
GC/FID
A $77
Isobutyl Acrylate
106-63-8
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1.3 Proprietary
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hrs (Max)
STEL 15 min
0.0121 2.5 Proprietary
IHGC-P029
GC/FID
A $77
Isobutyl Alcohol
78-83-1
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 10 NIOSH 1401
GC/FID
C $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0359 15 NIOSH 1401M
GC/ FID
C $56
Isobutyryl Chloride
79-30-1
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Isobutyl Isobutyrate
97-85-8
T-01
Charcoal, 226-01
10 0.2 5 OSHA PV2090
GC/FID
F $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0255 7.5 OSHA PV2090M
GC/FID
A $56
Isobutyl Methacrylate
97-86-9
M-02
SKC POVM, 575-002
TWA 8 hrs (Max)
STEL 15 min
0.011 2.3 Proprietary
IHGC-P029
GC/FID
A $77
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03 - 0.2
STEL 0.2
1.2 Proprietary
IHGC-P029
GC/FID
A $77
Isobutyraldehyde
78-84-2
T-119
DNPH-Treated Silica Gel,
226-119
TWA 3-24
STEL 3
TWA 0.05-0.5
STEL 0.2
1 MOSH 2532M
HPLC/UV
N $116 Any ketone or aldehyde will react with the DNPH and is a
potential interference. Large concentrations of the acetone
or MEK will compete with aldehyde and are therefore
potential negative interferences. Refrigerate media before
and after sampling and ship overnight. Also see Aldehyde
Profile for additional compounds.
Isoflurane
26675-46-7
$- See Forane.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com67
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Isooctane
540-84-1
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 10 NIOSH 1500
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0271 15 NIOSH 1500M
GC/FID
A $56
Isopentyl Acetate
123-92-2
$- See Isoamyl Acetate
Isophorone
78-59-1
T-81
Anasorb 747, 226-81
2 - 25 1 Max 50 NIOSH 2508M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0217 30 NIOSH 2508M
GC/FID
A $56
Isophorone Diisocyanate
4098-71-9
K-20
GFF, 2PP-treated, 37mm,
3PC
15 - 240 1 0.2 OSHA 42
HPLC/FL
O $116 Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
Isophthalic Acid as
Particulate
121-91-5
C-11
PVC, Preweighed, 37mm,
5um, 2PC
100-480 1-4 50 NIOSH 0500
Gravimetric
NC $21 Not chemical specific.
Isoprene
78-79-5
T-73
TBC-Treated charcoal,
226-73
TWA 3
STEL 0.75
0.05 2 OSHA 56
GC/FID
NC $56 Store in freezer after sampling. Ship cold overnight.
Isopropanol
67-63-0
$- See Isopropyl Alcohol
Isopropyl Acetate
108-21-4
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 20 NIOSH 1454
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 7 hours 0.0317 30 NIOSH 1454M
GC/FID
A $56
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com68
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Isopropyl Alcohol
67-63-0
T-01
Charcoal, 226-01
0.2 - 3 0.01 - 0.2 5 NIOSH 1400
GC/FID
A or B $56
M-3520
3M POVM 3520, 2-stage
Up to 8 hours 0.0394 7.5 NIOSH 1400M
GC/FID
A or B $56 Limit sampling to 4 hours at high humidity (> 80% RH).
Isopropyl Benzene
98-82-8
$- See Cumene
Isopropylamine
75-31-0
T-30-18
NITC-Treated XAD-2,
226-30-18
TWA 20
STEL 1.5
TWA 0.1
STEL 0.1
4 OSHA Stopgap
HPLC/UV
NC $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Isopropyl Chloroformate
108-23-6
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Isovaleraldehyde
590-86-3
T-119
DNPH-Treated Silica Gel,
226-119
2 - 30 0.2 - 1.0 1 TO-11
HPLC
N $116 Also see Aldehyde Profile. Any ketone or aldehyde will
react with the DNPH and is a potential interference. Large
concentrations of acetone or MEK will compete with the
aldehyde and are therefore potential negative
interferences. Refrigerate before and after sampling and
ship overnight.
Kathon ® 886 Biocide
Mixture
N/A
T-99
GFF/Silica Gel OVS,
226-99
TWA 50
STEL 7.5
TWA 0.2
STEL 0.5
See
individual
compound
entries
IHHPLC-P008
HPLC/UV
JJ See individual
compound
entries
This product contains 2-Methyl-4-Isothiazolin-3-One (RH
573) and 5-Chloro-2-Methyl-4-Isothiazolin-3-One (RH 651).
Avoid and ensure that the outside of the OVS tube is not
contaminated when sampling atmospheres potentially
containing this material as either a particulate or aerosol.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.anayticscorp.com69
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Kathon ® 893 Biocide
26530-20-1
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0
0.6 IN-HOUSE
IHHPLC-P002
HPLC/UV
K $160 Avoid and ensure that the outside of the OVS tube is not
contaminated when sampling atmospheres potentially
containing RH-287 as a particulate. This product contains 2-
N-Octyl-4-Isothiazolin-3-one.
Kathon ® 930 Microbiocide
64359-81-5
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0
0.5 IN-HOUSE
IHHPLC-P002
HPLC/UV
K $160 This product contains 4,5-Dichloro-2-N-Octyl-4-Isothiazolin-
3-one; also known as RH-287.
Kerosene
(Diesel fuel)
8008-20-6
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 50 NIOSH 1550
GC/FID
A $77 Submit 5 ml of bulk in separate shipment for reference. Can
also be used to measure jet fuels in air (JP-4 or JP-8).
M-3500
3M POVM, 3500
Up to 8 hours 0.0208 75 NIOSH 1550M
GC/FID
A $77
Lauryl Acrylate
2156-97-0
T-81
Anasorb 747,
226-81
TWA 10 TWA
0.03 - 0.2
3.4 IN-HOUSE
GC/FID
A $77
Lead
7439-92-1
C-05
MCEF, 37mm, 0.8um, 3PC
400 - 2000 1.0 - 3.0 2 NIOSH 7300
ICP
T $40
C-05
MCEF, 37mm, 0.8um, 3PC
400 - 2000 1.0 - 3.0 0.062 NIOSH 7300M
ICP/MS
T $46
Lead - Paint chips
7439-92-1
1 - 2 gm N/A 0.005% NIOSH 7082M
FLAA/ICP
T $28
Lead
Soil or Water
7439-29-1
$- See Environmental Directory of Services for detailed
information.
Lead
Wipes/Dust
7439-92-1
K-07
Ghost Wipe Kit
100 sq. cm. or 1 sq. ft. 2 NIOSH 7082
ICP-OES
T $28 Place folded wipe in special shipping/digestion container
supplied by the laboratory as Wipe Test Kit (K-07).
Ligroin
8032-32-4
$- See Naphtha or Petroleum Distillates
Lime
1305-78-8
C-11
PVC, Preweighed, 37mm,
5um, 2PC
480 1-4 50 NIOSH 0500
Gravimetric
$21 Not chemically specific.
Limonene
138-86-3
T-01
Charcoal, 226-01
10 - 25 0.2 Max 20 NIOSH 1552
GC/FID
A $56 Samples are stable at room temperature for at least 30
days.
Lithium
7439-93-2
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 2000 1.0 - 3.0 4 NIOSH 7300
ICP
T $40
Lithium Hydride
7580-67-8
C-05
MCEF, 37mm, 0.8um, 3PC
160 - 2000 1.0 - 3.0 1.15 NIOSH 7300M
ICP
T $40 Total lithium reported as LiH.
Magnesium Fume
1309-48-4
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 1200 1.0 - 3.0 2 T $40 Magnesium oxide fume as magnesium.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com70
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
MAK
110-43-0
$- See Methyl n-Amyl Ketone
Maleic Acid
110-16-7
C-06
GFF, 37mm, 1um, 3PC
TWA 100-480
STEL 30
1-4 2 NIOSH P&CAM 302
HPLC/UV
NC $116
Maleic Anhydride
108-31-6
T-30-07
XAD-2, 226-30-07
20 0.1 2 OSHA 25
HPLC
NC $116 Tubes have short shelf-life; store cold. Include 226-30 tube
(T-30) in train between 226-30-07 tube and pump. Discard
226-30 tube after sampling. Wrap tubes with foil to protect
from light during sampling and shipping. Ship samples
refrigerated by overnight delivery. If maleic anhydride
exists in the air as particulates, sample using coated filters
per method OSHA 86. Any compound that will react with p-
anisidine and has the same retention time will interfere in
the spectral region of interest.
C-28
GFFs (2), amine-treated,
37mm, 4PC
140 0.5 2 OSHA 86
HPLC/UV
K $116 Preferred method. Sample closed-face. If maleic anhydride
exists in the air as particulates, sample using coated filters
per method OSHA 86. This method may also be used just
for vapors. Media has 1 month shelf life; Store in a
refrigerator and ship as soon as possible after sampling.
Manganese
7439-96-5
C-05
MCEF, 37mm, 0.8um, 3PC
100 - 1000 1.0 - 3.0 0.05 NIOSH 7300M
ICP-MS
T $46
C-05
MCEF, 37mm, 0.8um, 3PC
100 - 1000 1.0 - 3.0 2 NIOSH 7300M
ICP-OES
T $40
MBK
591-78-6
$- See Methyl butyl Ketone
4,4’-MDI
101-68-8
$- See Methylene Bisphenyl Diisocyanate.
MEK
78-93-3
$- See Methyl Ethyl Ketone.
MEK Peroxide
1338-23-4
T-93
XAD-4, 226-93
15 1 10 OSHA 77
HPLC/UV
NC $- Call lab prior to sampling. Freeze samples immediately after
sampling. Ship samples cold by overnight delivery. Samples
referred to outside laboratory for analysis.
Menthol
2216-51-5
T-10
Silica Gel, 226-10
10 - 20 0.1 5 SPM
GC/FID
NC $56
Mercaptopropyltrimeth-
oxysilane, Gamma
4420-74-0
O-202580
Specially Cleaned XAD-2,
O-202580
30 0.05-0.07 10 IHGC-P032
GC/FID
K $77 Ship sample by overnight delivery to the lab
in insulated container with cold pack.
Synonym: Silane A-189.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com71
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Mercury
7439-97-6
T-17-1A
Anasorb C300,
226-17-1A
20 - 100 0.15 - 0.25 0.025 NIOSH 6009
CVAA
NC $77 Tube samples are stable for 30 days at 25°C. Sample with
prefilter (C-05) in the presence particulates containing
mercury, or particulates containing Cr +6 or large amounts
of Ni +2. The prefilter may be tested for mercury
particulates if needed. Ship prefilter samples to lab as soon
as possible.
M-03
SKC Mercury PM,
SKC PN 520-02A
8 hours Max 0.02 0.1 OSHA ID140M
CVAA
NC $77 PN 520-02A is the consumable sorbent capsule only;
passive monitor holders (SKC 520-03) are required, and are
available for $40 each.
Mercury Particulate
7439-97-6
C-05
MCEF, 37mm, 0.8um, 3PC
100 - 1000 1.0 - 3.0 0.05 OSHA ID 145
CVAA
NC $77
Mercury Wipes Various K-07
Ghost Wipe Kit
100 cm2 0.075 EPA SW846 7471A
CVAA
NC $77
Mesityl Oxide
141-79-7
T-01
Charcoal, 226-01
1 - 25 0.01 - 0.2 20 NIOSH 1301
GC/FID
H $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0312 30 NIOSH 1301M
GC/FID
H $56
Mesitylene
108-67-8
$- See 1,3,5-Trimethylbenzene
Metalworking Fluids
N/A
C-09
PTFE, Preweighed, 37mm,
2um, 2PC
500 - 1000 2 50 NIOSH 5524
Gravimetric with
Extraction
NC $98 Laboratory pre-washed and preweighed Teflon filters are
required; NIOSH 5524 Issue 2 (12/2014) recommends at
least 5 field blanks per sample set; pre-washing the Teflon
filters has minimized this need, though at least 1 field blank
is required. A special 3-piece cassette is required for
thoracic- range cyclone. Store samples cold if not shipped
immediately, analyze within 2 weeks of collection.
Applicable to mineral oils, semi-synthetics, and synthetic
fluids. Send small bulk sample (1 - 5 mL) of fluid for
solubility evaluation. Ship cold for overnight delivery.
Methacrylamide
79-39-0
IMP-14
MFGB, 20 mL DI Water
150 0.8 2 IHHPLC-P004
HPLC/UV
NC $160
Methacrylic Acid
79-41-4
T-49-108
Chromosorb 108,
226-49-108
TWA 5
STEL 1.5
TWA 0.03-0.3
STEL 0.1
4.5 Proprietary, IHHPLC-
P005 HPLC/UV
NC $160 Acrylic acid can be collected and analyzed along with
methacrylic acid by this method.
T-30-08(2)
Anasorb 708, 226-30-08,
2 in series
24 0.1 4 OSHA PV2005
HPLC/UV
K $160 Two identical tubes sampled in series. Acrylic acid may also
be tested along with methacrylic acid.
Methacroyl Chloride
920-46-7
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
B-Methallyl Chloride See 3-Chloro-2-methyl-1-propene
Methanol
67-56-1
$- See Methyl Alcohol
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com72
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1-Methoxy-2-Propanol
107-98-2
$- See Propylene Glycol Methyl Ether
1-Methoxy-2-Propanol
Acetate
108-65-6
$- See Propylene Glycol Methyl Ether Acetate
2-Methoxyethanol
109-86-4
T-01
Charcoal, 226-01
15 0.01 - 0.1 20 OSHA 79
GC/FID
E $56 Synonym: Methyl Cellosolve
M-3500
3M POVM, 3500
Up to 8 hours 0.0363 30 OSHA 79M
GC/FID
E $56
2-(2-Methoxyethoxy)
ethanol
111-77-3
$- See Diethylene Glycol Monomethyl Ether.
2-Methoxyethyl Acetate
110-49-6
T-01
Charcoal, 226-01
10 - 50 0.01 - 0.2 20 OSHA 79
GC/FID
E $56 Synonyms: Methyl Cellosolve Acetate, Ethylene Glycol
Monomethyl Ether Acetate.
M-3500
3M POVM, 3500
Up to 8 hours 0.029 30 OSHA 79M
GC/FID
E $56 Synonyms: Methyl Cellosolve Acetate, Ethylene Glycol
Monomethyl Ether Acetate.
2-Methoxyethyl Ether
111-96-6
$- See Diethylene Glycol Dimethyl Ether
2-Methoxy-1-Methylethyl
Acetate
108-65-8
See Propylene Glycol Methyl Ether Acetate
Methyl 2 Cyanoacrylate
137-05-3
T-98
H3PO4-treated XAD-7,
226-98
12 0.01 - 0.2 10 OSHA 55
HPLC
NC $116
Methyl Acetate
79-20-9
T-01
Charcoal, 226-01
2 - 10 0.01 - 0.2 20 NIOSH 1450M
GC/FID
A $56
M-3520
3M POVM 3520,
2-stage
2 hours Max 0.037 30 NIOSH 1450M
GC/FID
A $56
Methyl Acrylate
96-33-3
T-01
Charcoal, 226-01
5 Max 0.01 - 0.2 20 NIOSH 1459M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0358 30 NIOSH 1459M
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1.3 Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min
0.016 2.6 Proprietary,
IHGC-P029
GC/FID
A $77
T-73
TBC-Treated charcoal, 226-
73
12 Max 0.05 Max 20 OSHA 92
GC/FID
A $56
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com73
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Methyl Alcohol
67-56-1
T-15
Silica Gel, 226-15
10 Max 0.02 - 0.2 20 NIOSH 2000
GC/FID
NC $56 Reduce air volume when sampled in high humidity
conditions. Store samples in refrigeration. Ship samples
cold for overnight delivery.
T-82 (2)
Anasorb 747, 226-82,
(2 in series)
TWA 3.0
STEL 0.75
0.05 Max
0.05
20 OSHA 91
GC/FID
NC $56
M-07
SKC POVM, 575-007
Up to 8 hours 0.0012 5 OSHA 91M
GC/FID
PP $56 Sampler includes (and requires) a secondary diffusion
barrier.
Methyl Amyl Alcohol
108-11-2
$- See Methyl Isobutyl Carbinol
Methyl t-Amyl Ether
994-05-8
$- See t-Amyl Methyl Ether
Methyl n-Amyl Ketone
110-43-0
T-01
Charcoal, 226-01
1 - 25 0.05 - 0.2 20 NIOSH 1301
GC/FID
A $56 Synonyms: Methyl pentyl ketone, heptan-2-one
M-3500
3M POVM, 3500
Up to 8 hours 0.0279 30 NIOSH 1301M
GC/FID
A $56
Methyl Bromide
74-83-9
T-83 (2)
Anasorb 747, 226-83
3 Max 0.05-0.2 10 PV2040
GC/FID
A $69 Two 226-83 tubes in series. Cap separately after sampling
and refrigerate immediately. Ship in an insulated container
with synthetic ice product and analyzed within two weeks
of sampling.
Methyl t-Butyl Ether
1634-04-4
T-09 (2)
Charcoal, 226-09,
2 in Series
2 - 96 0.1 - 0.2 20 NIOSH 1615
GC/FID
A $56 Sample with two tubes in series. Cap separately after
sampling. Smaller 226-01 tube can be used as second tube
in train.
M-3500
3M POVM, 3500
Up to 8 hours 0.0308 5 NIOSH 1615M
GC/FID
A $56
Methyl Butyl Ketone
591-78-6
T-01
Charcoal, 226-01
5 - 10 0.2 20 NIOSH 1300
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0297 30 NIOSH 1300M
GC/FID
A $56
Methyl Carbitol
11-77-3
$- See Diethylene Glycol Monomethyl Ether.
Methyl Cellosolve
109-86-4
$- See 2-Methoxyethanol
Methyl Cellosolve Acetate
110-49-6
$- See 2-Methoxyethyl Acetate
Methyl Chloride
74-87-3
T-09
(2 in series) Charcoal,
226-09, 2 in Series
TWA 3
STEL 1.5
TWA 0.02-0.1
STEL 0.1
10 NIOSH 1001
GC/FID
I $56 Ship samples by overnight delivery to the lab in insulated
container with cold pack. Using 226-01
for second tube in series is acceptable.
Synonym: Chloromethane
Methyl Chloroform
71-55-6
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 10 NIOSH 1003
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0309 20 NIOSH 1003M
GC/FID
A $56
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com74
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Methyl Chloroformate
79-22-1
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Methyl Cyclohexane
108-87-2
T-01
Charcoal, 226-01
4 - 10 0.01 - 0.2 20 NIOSH 1500
GC/FID
A $56
Methyl Ether
115-10-6
T-01
Charcoal, 226-01
3 Max 0.01 - 0.2 20 NIOSH 1610M
GC/FID
A $56 Stable in freezer for 14 days. Synonym: Dimethyl Ether
M-3520
3M POVM, 3520
2 Hours Max 0.033 30 NIOSH 1610M
GC/FID
A $56
Methyl Ether Hydroquinone See Hydroquinone nonmethylether
4- Methoxyphenol See Hydroquinone nonmethylether
Methyl Ethyl Ketone
78-93-3
T-10 (2)
Silica Gel, 226-10,
2 tubes in series
3 - 10 0.1 20 OSHA 16
GC/FID
NC $56 Sample with 2 tubes in series, cap separately after
sampling.
Synonym: 2- Butanone
T-01
Charcoal, 226-01
2 - 12 0.01 - 0.2 5 NIOSH S3
GC/FID
A $56 Ship refrigerated by overnight delivery.
T-81
Anasorb 747, 226-81
2 - 12 0.01 - 0.2 5 NIOSH 2500
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1 Proprietary,
IHGC-P029
GC/FID
A $77
M-3500
3M POVM, 3500
Up to 8 hours 0.0363 7.5 OSHA 07M
GC/FID
A $56 Keep samples cold and expedite analysis for optimum
results.
M-02
SKC POVM, 575-002
15 - 480 min 0.02 2 Proprietary,
IHGC-P029
GC/FID
A $77
Methyl Ethyl Ketone
Peroxide
1338-23-4
$- See MEK Peroxide
Methyl Ethyl Ketoxime
96-29-7
T-10
Silica Gel, 226-10
TWA 24
STEL 7.5
TWA 0.05-0.2
STEL 0.5
5 IN-HOUSE
GC/FID
K $77 Refrigerate as soon as possible after collection. Ship cold by
overnight carrier.
Methyl Formate
107-31-3
T-83
Anasorb 747, 226-83
3 Max 0.05 Max 5 PV2041
GC/FID
NC $56
Methyl Hydrazine
60-34-4
C-15
GFFs (2), H2SO4-treated,
37mm, 3PC
240 1 0.5 OSHA 108M
HPLC
NC $116
Methyl Isoamyl Ketone
110-12-3
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 20 NIOSH 1300M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.028 30 NIOSH 1300M
GC/FID
A $56
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com75
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Methyl Isobutyl Carbinol
108-11-2
T-01
Charcoal, 226-01
5 - 10 0.05 - 0.2 20 NIOSH 1402
GC/FID
NC $56 Store in freezer after sampling, ship overnight. Synonym:
Methyl Amyl Alcohol
M-3500
3M POVM, 3500
Up to 8 hours 0.0292 30 NIOSH 1402M
GC/FID
NC $56 Store in freezer after sampling, ship overnight. Synonym:
Methyl Amyl Alcohol
Methyl Isobutyl Ketone
(MIBK)
108-10-1
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 5 NIOSH 1300
GC/FID
A $56 Synonyms: Hexone, 4-Methyl-2-pentanone; Isobutyl methyl
ketone; MIBK. Store samples cold and ship cold overnight.
M-3500
3M POVM, 3500
Up to 8 hours 0.03 7.5 NIOSH 1300M
GC/FID
A $56 Synonyms: Hexone, 4-Methyl-2-pentanone; Isobutyl methyl
ketone; MIBK. Store samples cold and ship cold overnight.
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1 Proprietary,
IHGC-P029
GC/FID
A $77 Synonyms: Hexone, 4-Methyl-2-pentanone; Isobutyl methyl
ketone; MIBK. Store samples cold and ship cold overnight.
M-02
SKC POVM, 575-002
15 - 240 min 0.013 2 Proprietary,
IHGC-P029
GC/FID
A $77 Synonyms: Hexone, 4-Methyl-2-pentanone; Isobutyl methyl
ketone; MIBK. Store samples cold and ship cold overnight.
O-91
Carbosieve S-III, Orbo 91
10 Max 0.01 - 0.2 10 NIOSH 2555 GC/FID A $77 Synonyms: Hexone, 4-Methyl-2-pentanone; Isobutyl methyl
ketone; MIBK. Store samples cold and ship cold overnight.
2-Methyl-4-Isothiazolin-3-
One (RH 573)
2682-20-4
T-99
GFF/Silica Gel OVS,
226-99
TWA 50
STEL 7.5
TWA 0.2
STEL 0.5
0.1 IHHPLC-P008
HPLC/UV
JJ $160 This chemical is one component of Kathon® 886 Biocide.
Also known as RH 573.
Methyl Mercaptan
74-93-1
C-48
GFF, Hg Acetate-Treated,
37mm, 2PC,
SKC PN 225-9007
10-150 0.1-0.2 4 NIOSH 2542
GC/FPD
NC Call for
pricing
Store media cold before use. Protect samples from light
after sampling. Samples are stable for 15 days at 25°C.
Samples are subcontracted to outside laboratory.
Methyl
Mercaptopropionate
2935-90-2
T-47-01
Silica Gel, 226-47-01
TWA 6 max
STEL 3
TWA 0.05 - 0.2
STEL 0.2
1.3 IHGC-P032
GC/FID
K $77
Methyl Methacrylate
80-62-6
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1.1 Proprietary,
IHGC-P029
GC/FID
A $77
T-30-06
XAD-2, 226-30-06
1 - 8 0.01 - 0.05 20 NIOSH 2537
GC/FID
DD $56 Store in freezer and ship overnight on dry ice.
T-73
TBC-Treated charcoal,
226-73
3 Max 0.01 - 0.05 20 OSHA 94
GC/FID
CC $56
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min
0.0131 2.2 Proprietary,
IHGC-P029
GC/FID
A $77 Preferred passive sampling method.
M-3500
3M POVM, 3500
Up to 8 hours 0.0318 30 NIOSH 1450M
GC/FID
A $56
Methyl Methanoate
107-31-3
$- See Methyl Formate
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com76
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Methyl Propyl Ketone
107-87-9
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 5 NIOSH 1300
GC/FID
A $56 Synonym: 2-Pentanone
M-3500
3M POVM, 3500
Up to 8 hours 0.033 7.5 NIOSH 1300M
GC/FID
A $56
n-Methyl Pyrrolidone
(NMP)
872-50-4
T-01
Charcoal, 226-01
30 - 125 0.05 -0.2 20 NIOSH 1302
GC/FID
E $56 Protect from prolonged light exposure. Refrigerate samples
and ship cold overnight.
M-3500
3M POVM, 3500
Up to 8 hours 0.0288 30 NIOSH 1302M
GC/FID
E $56
Methyl Styrene (alpha)
98-83-9
T-01
Charcoal, 226-01
3 - 30 0.2 20 NIOSH 1501M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.025 30 NIOSH 1501M
GC/FID
A $56
Methyl Styrene,
meta and para
25013-15-4
$- See Vinyl Toluene
2-Methyl-1,3- Butadiene
78-79-5
$- See Isoprene
4-Methyl-2- Pentanone
108-10-1
$- See Methyl Isobutyl ketone (MIBK)
2-Methyl-4-Isothiazolin-3-
One
2682-20-4
$- See Kathon 886 Biocide
Methylal
109-87-5
T-01
Charcoal, 226-01
1 - 3 0.01 - 0.2 20 NIOSH 1611
GC/FID
S $56 Also known as Dimethoxymethane
M-3520
3M POVM 3520, 2-stage
1 Hour 0.0379 30 NIOSH 1611M
GC/FID
A $56
Methylamine
74-89-5
T-30-18
NITC-Treated XAD-2,
226-30-18
1-20 0.01-0.1 4 NIOSH 2540M
HPLC
N $116 Preferred method. Store media cold before sampling.
Samples stable ambient temperature for at least 15 days.
T-96
NBD-chloride-treated
XAD-7, 226-96
TWA 10
STEL 3
TWA 0.01-0.2
STEL 0.2
3 OSHA 40
HPLC
W $116
2-Methylbutyl Acetate
624-41-9
T-01
Charcoal, 226-01
TWA 10
STEL 3
TWA 0.01-0.2
STEL 0.2
20 NIOSH 1450
GC/FID
A $56
1-Methylbutyl Acetate
626-38-0
$- See sec-Amyl Acetate.
4,4’ Methylene bis (2-
Chloroaniline)
101-14-4
$- See MOCA
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com77
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Methylene Bisphenyl
Diisocyanate
101-68-8 (4,4’-MDI)
5873-54-1 (2,4’-MDI)
K-20
OSHA Isocyanate Kit for
Field Desorption (see
description at right)
15 - 240 1 0.12 OSHA 47
HPLC/FL
O $116 Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette, V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
Methylene Bisphenyl
Diisocyanate, Polymeric
(PMDI), Air Sample
9016-87-9 and others
K-20
OSHA Isocyanate Kit for
Field Desorption (see
description at right)
15 - 240 1 Variable OSHA 47
Mod. HPLC/FL
O $116 ($58 if
tested along
with MDI
monomer)
Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
Methylene Bisphenyl
Diisocyanate, Polymeric
(PMDI), Bulk Sample
Characterization
9016-87-9 and others
Vial 1-5 mL of un-diluted MDI/
PMDI product
Variable OSHA 47
Mod. HPLC/FL
O $158 Bulk sample of undiluted MDI/PMDI product is required.
Contact lab for specific instructions.
Methylene Chloride
75-09-2
See dichloromethane.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com78
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
4,4-Methylene Dianiline
101-77-9
K-13
C-15 (H2SO4 Treated GFF)
plus 2 vials with 2 ml DI
water for field transfer.
1000 Max 1.0 - 2.0 0.1 NIOSH 5029M
HPLC/UV
NC $102 Within 4 hours after sampling, transfer each filter to a
separate glass vial containing 2 ml deionized water.
Methylenebis(4-
Cyclohexylisocyanate)
5124-30-1
K-20
OSHA Isocyanate Kit for
Field Desorption (see
description at right)
15 - 60 1 0.4 OSHA PV2092
HPLC
O $116 Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
n-(1-Methylethyl)-2-
Propanamine
108-18-9
See Diisopropylamine.
Methylolacrylamide
924-42-5
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1
1.5 IHHPLC-P003
HPLC/UV
NC $160 Acrylamide may also be tested along with n-
methylolacrylamide.
Synonym: N-(Hydroxymethyl)acrylamide.
2-Methyl-2,
4-Pentanediol
107-41-5
See Hexylene Glycol.
Methyltin Trichloride
993-16-8
T-30-16
GFF/XAD-2 OVS,
226-30-16
TWA 15-75
STEL 15 Max
TWA 0.25
STEL 1.0
0.1 NIOSH 5526
GC/FPD
NC Call for
pricing.
Note: This is a labor-intensive analysis requiring a
dedicated instrument; 3-sample minimum applies. Analysis
is also available for the following agents on one sample:
dimethyltin dichloride and trimethyltin chloride. Samples
are subcontracted to an outside laboratory.
MIAK
110-12-3
$- See methyl Isoamyl Ketone
MIBK See Methyl Isobutyl Ketone
Mineral Oil as particulate
8052-41-3
$- See Oil Mist
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com79
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Mineral Spirits
8052-41-3, 68551-17-7,
64741-65-7, others
T-01
Charcoal, 226-01
20 0.01 - 0.2 50 OSHA 48 GC/FID A $77
M-3500
3M POVM, 3500
Up to 8 hours 0.0243 50 NIOSH 1550M
GC/FID
A $77
MOCA
101-14-4
K-13
C-15 (H2SO4 Treated GFF)
plus 2 vials with 2 ml DI
water for field transfer.
100 Max 1.0 Max 0.1 OSHA 71M
(sampling)
NIOSH P&CAM
236M (analysis)
HPLC/UV
NC $116 Transfer each filter (using tweezers) to a separate glass vial
containing 2 mL DI water within 10 hours of sampling.
Extracted samples are stable at room temperature for at
least 2 weeks.
Mold Spore Count & ID
(Non-Viable) N/A
C-23
Air-O-Cell Cassette
150 15 Standard
Microscopy
NA
NC Call for
pricing
See Indoor Air Quality Profiles. Rush Turnaround requires
notification.
Mold Spore ID
(Non-Viable)
Bulk N/A
1X1 inch NA Presence/
Absence
Standard
Microscopy
NA
NC Call for
pricing
See Indoor Air Quality Profiles. Rush Turnaround requires
notification.
Molybdenum, Total
7439-98-7
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 1000 1.0 - 3.0 2 NIOSH 7300
ICP-OES
T $40
Monochloroacetic Acid
79-11-8
T-47-01
Silica Gel, 226-47-01
10 - 100 0.05 - 0.2 1 NIOSH 2008
IC
V $69 Store samples cold and in the dark. Synonym: Chloroacetic
Acid.
Monochlorobenzene
108-90-7
$- See Chlorobenzene.
Morpholine
110-91-8
T-30-18
NITC-Treated XAD-2,
226-30-18
20 Max 0.1 Max 1 NIOSH 2540M
HPLC
N $116 Preferred Method. Store media cold before sampling.
Samples stable at ambient temperature for at least 15 days.
T-98
H3PO4-treated XAD-7,
226-98
10 Max 0.1 Max OSHA PV2133
GC/FID
NC Call for
pricing
Store and ship cold after sampling. Samples are
subcontracted to an outside laboratory.
MPK
107-87-9
$- See Methyl Propyl Ketone.
MTBE
1634-04-4
$56 See Methyl t-Butyl Ether.
Naphtha, Petroleum (MW =
97.8-110)
8030-30-6
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 50 NIOSH 1550
GC/FID
A $77 Ship 5 ml pure distillate in separate shipment for reference.
M-3500
3M POVM 3500
Up to 8 hours 0.0331 75 NIOSH 1550M
GC/FID
A $77 Ship 5 ml pure distillate in separate shipment for reference.
Naphtha, VM & P
(MW = 118-130)
8032-32-4
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 50 NIOSH 1550
GC/FID
A $77 Ship 5 ml pure distillate in separate shipment for reference.
M-3500
3M POVM, 3500
Up to 8 hours 0.0332 75 NIOSH 1550M
GC/FID
A $77 Ship 5 ml pure distillate in separate shipment for reference.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com80
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Naphthalene
91-20-3
T-110
Chromosorb 106,
226-110
TWA 10 Max
STEL 3 Max
0.2 Max 5 OSHA 35
GC/FID
A $56
T-01
Charcoal, 226-01
30 0.2 Max 20 NIOSH 1501M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0246 30 NIOSH 1501M
GC/FID
A $56
K-06
PTFE + ORBO 43
200-1000 2 3 NIOSH 5506
HPLC
NC $116 See methods listed above for monitoring naphthalene
alone; this entry describes monitoring for a PAH Profile.
Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Nickel
7440-02-2
C-05
MCEF, 37mm, 0.8um, 3PC
400 - 1000 1.0 - 3.0 2 NIOSH 7300
ICP-OES
T $40
C-05
MCEF, 37mm, 0.8um, 3PC
400 - 1000 1.0 - 3.0 0.063 NIOSH 7300
ICP-OES
T $46
Nickel Carbonyl
(as Ni)
13463-39-3
O-304
Low-Nickel charcoal, ORBO
304,
Supelco PN 20041
10 - 80 0.05 - 0.2 0.03 NIOSH 6007M
ICP/MS
NC $77 MCEF prefilter (C-05) is required when nickel particulates
are present. Do not return filter after sampling.
Nicotine
54-11-5
T-93
XAD-4, 226-93
0.5 - 600 0.1 - 1 1 NIOSH 2551
GC/NPD
NC $127 Store cold and ship cold overnight, protect from light.
Stable for 2 weeks at 5°C.
T-93
XAD-4, 226-93
1-24 hours (duration limited
by sorbent capacity of
approx. 300 ug nicotine)
1.5 Max 0.2 ASTM D5075
GC/NPD
NC $127 Store samples in freezer, ship cold overnight. Stable for 8
weeks at -10ºC. Testing for 3-ethenylpyridine also available,
for Environmental Tobacco Smoke (ETS) monitoring.
Nitrates, Particulate
N/A
C-05
MCEF, 37mm, 0.8um, 3PC
3 - 100 0.5 - 1.5 5 NIOSH 7903M
IC
U $69
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com81
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Nitric Acid
7697-37-2
C-68
Na2CO3-treated Quartz +
Quartz prefilter
30 - 600 2.0 5 NIOSH 7907
IC/COND
SS Samples require at least 4 days equilibration prior to
analysis.
T-10-03
Prewashed Silica Gel,
226-10-03
TWA 96
STEL 7.5
TWA 0.5
STEL 0.5 Max
5 OSHA ID1655G
IC/COND
U
T-10-03
Prewashed Silica Gel,
226-10-03
3 - 100 0.2 - 0.5 5 NIOSH 7903
IC
U $69 NIOSH now describes NIOSH Method 7903 as a “historical”
method and does not recommend its use, advocating
instead for a series of filter methods which provide
improved sensitivity and the opportunity for size-selective
sampling of aerosols. NIOSH’s intention is not to invalidate
results developed using NIOSH 7903 in the past, but to
instead transition users to the newer filter methods. Also
see Acid Mist Profile.
Nitric Oxide
(NO)
10102-44-0
T-40
TEA-treated Molecular
Sieve, 226-40
1.5 - 6 0.025 1.3 NIOSH 6014
Spec
NC $69 Third tube in train of three (TEA tube for NO2, followed by
oxidizer tube, followed by TEA tube for NO). Discard
oxidizer tube after sampling. NO is tested only from the
third tube in train. Store tubes cold. Samples are stable at
ambient temperature for at least 7 days. Inorganic nitrites
cause positive interference.
p-Nitroaniline
100-01-6
C-05
MCEF, 37mm, 0.8um, 3PC
TWA 480
STEL 60
TWA 1-4
STEL 4
10 NIOSH 5033
HPLC/UV
NC $116 Note: This method is applicable to p-nitroaniline aerosol
but not for environments where vapor may be present.
Nitrobenzene
98-95-3
T-10
Silica Gel, 226-10
10 - 150 0.01 - 1.0 5 NIOSH 2005
GC/FID
K $56
Nitroethane
79-24-3
T-30-06 (2)
XAD-2, 226-30-06
3 0.01-0.05 40 NIOSH 2526
GC/FID
NC $56 Two 226-30-06 tubes in series.
Nitrogen Dioxide
10102-44-0
T-40-02
TEA-treated Molecular
Sieve, 226-40-02
1.5 - 6
(see notes at right regarding
improved sensitivity)
0.025 - 0.2 2 NIOSH 6014
Spec
NC $69 The NO2 TLV has been lowered since publication of NIOSH
Method 6014, which describes validation per- formed in
NIOSH 2nd Edition Method S320. This validation
demonstrated efficient collection at a rate of 0.064 L/min
for 180 minutes (11.5 L) in at atmosphere of 11.6 ppm
NO2/84% RH. Two tubes may be sampled in series for
indication of breakthrough. Store tubes cold before
sampling. Samples are stable at ambient temperature for at
least 7 days. No oxidizer tube needed.
M-04
SKC NO2 & SO2 Passive
Sampler, UMEx-200
15 min. up to 24 hours 0.0173 1.0 SKC #40108 rev.
1102
IC/COND
SS $69 May be tested for sulfur dioxide also. Samples are stable
for 3 weeks at ambient temperature. Return sampler to
aluminized pouch and seal for storage and shipping.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com82
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Nitrogen Dioxide/Nitric
Oxide (NO2 / NO)
N/A
T-40
TEA-treated Molecular
Sieve, 226-40
1.5 - 6 0.025 NO 1.3
NO2 2.0
NIOSH 6014
Spec
NC $153 Three tubes in train are required (TEA tube for NO2,
followed by oxidizer tube, followed by TEA tube for NO).
Discard oxidizer tube after sampling. Since NO requires
oxidation before trapping, the notes above regarding
improved test sensitivity for NO2 do not apply. Store tubes
cold before sampling. Samples are stable at ambient
temperature for at least 7 days. Inorganic nitrites cause
positive interference.
Nitromethane
75-52-5
T-110
Chromosorb 106,
226-110
2.4 0.02 2 NIOSH 2527
GC/NPD
NC Call for
pricing
Rear sorbent section must be transferred to a vial
immediately after sampling. Samples are subcontracted to
an outside laboratory.
2-Nitropropane
79-46-9
T-110
Chromosorb 106,
226-110
3 0.01-0.05 1.4 NIOSH 2528
GC/FID
NC $56
1-Nitropyrene
5522-43-0
C-06
GFF, 37mm, 1um, 3PC
960 2 Max 1 OSHA 58M
HPLC
MM $116
Nonyl Acetate
143-13-5
IMP-07
MFGB, Methanol
10 0.05 - 0.1 300 NIOSH 1450M
GC/FID
A $56 Part of Optisol Rotary. DuPont product.
Nonylphenol
84852-15-3
T-95
XAD-7, 226-95
24 Max 0.1 Max 100 OSHA PV2085M
HPLC/UV
K $160 Mixed isomer CAS #25154-52-3.
Nuisance Particulates,
Respirable
N/A
$- See Particulates, Respirable.
Nuisance Particulates, Total
N/A
$- See Particulates, Total.
Octamethylcyclotetrasi-
loxane
556-67-2
T-09
Charcoal, 226-09
TWA 96
STEL 30
TWA 0.2
STEL 2.0
16 IHGC-P040
GC/FID
A $77 Store samples in freezer, ship cold overnight.
n-Octane
111-65-9
T-01
Charcoal, 226-01
3 - 10 0.01 - 0.2 20 NIOSH 1500
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0266 30 NIOSH 1500M
GC/FID
A $56
n-Octylamine
111-86-4
T-93
XAD-4, 226-93
TWA 96
STEL 9
TWA 0.2
STEL 0.6
40 IHGC-P023
GC/FID
K $77 Store samples in chemical refrigerator if not immediately
shipped for analysis.
T-30-18
NITC-Treated XAD-2,
226-30-18
10 0.1 Max 0.4 NIOSH 2540M HPLC NC $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
t-Octylamine
107-45-9
T-93
XAD-4, 226-93
TWA 96
STEL 9
TWA 0.2
STEL 0.6
86 IHGC-P023
GC/FID
K $77 Store samples in chemical refrigerator if not immediately
shipped for analysis.
2-N-Octyl-4-Isothiazolin- 3-
One
26530-20-1
T-99
GFF/Silica Gel OVS,
226-99
TWA 96
STEL 15
TWA 0.2
STEL 1.0
0.6 IHHPLC-P002
HPLC/UV
K $160 Note: STEL samples may have to be repeated several times
in succession with the SAME tube in order to achieve
adequate sensitivity. Store samples in chemical refrigerator
if not immediately shipped for analysis.
Synonym: Kathon ® 893 Biocide, RH 287.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com83
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Oil Mist,
Custom
8012-95-1
C-11
PVC, Preweighed, 37mm,
5um
100 - 500 1.0 - 3.0 50 NIOSH 5026
FTIR
NC $127 Unweighed media may be used if total particulate results
are not required (C-05 or C-10). Ship a 5 ml bulk sample of
undiluted oil (not emulsion) separately for standardization.
Oil must be Freon 113 soluble.
Oil Mist,
Mineral
8012-95-1
C-11
PVC, Preweighed, 37mm,
5um
100 - 500 1.0 - 3.0 50 NIOSH 5026
FTIR
NC $77 Unweighed media (C-05 or C-10) may be used if total
particulate results are not required. Commercial white
mineral oil will be used as reference.
Oil Mist,
as Particulate
8012-95-1
C-11
PVC, Preweighed, 37mm,
5um
50 -1000 1.0 - 3.0 50 NIOSH 0500
Gravimetric
NC $21 Other non-oil particulates will positively interfere.
Optisol Inline
70914-20-4
$- See Heptyl Alcohol and Heptyl Acetate entries.
Optisol Rotary
143-13-5
$- See Nonyl Acetate and Benzyl Alcohol entries.
Oxalic Acid as Particulate
144-62-7
C-11
PVC, Preweighed, 37mm,
5um, 2PC
TWA 480-960
STEL 60
1-4 50 NIOSH 0500
Gravimetric
$21 Not chemically specific.
Oxone™,
measured as Sulfate Ion
10361-76-9
C-05
MCEF, 37mm, 0.8um, 3PC
30 - 480 0.5 - 2.0 5 OSHA ID 113
IC
U $79 Oxone is DuPont's trade name for the potassium salt of
peroxymonosulfuric acid. This procedure uses a modifi-
cation of OSHA Method 113 (Sulfuric Acid
sampling/analysis) for filter sampling of oxone, followed by
reduction to sulfate and analysis by Ion
Chromatography/Conductivity Detection. The sulfate
measurement is mathematically converted to an Oxone
equivalent.
10,10-Oxybisphenoxarsine
58-36-6
C-05
MCEF, 37mm, 0.8um, 3PC
TWA 480
STEL 60
TWA 1-4
STEL 4
0.05
as Arsenic
NIOSH 7901
GFAA
NC $51 On Analysis Request form specify “Arsenic-GFAA” analysis
(GFAA stands for Graphite Furnace Atomic Absorption and
provides a lower limit of quantitation than standard ICP
analysis) and request results reported as micrograms and
mg/M3 Oxybisphenoxyarsine, 10, 10’-. (To convert Arsenic
results to Oxybisphenoxyarsine, 10, 10’- (C24H16A- s2O3;
molecular weight 502.2) in the same units, multiply by
3.35). Note: This test is not chemically specific in that all
sources of Arsenic will contribute to the total result.
Ozone
10028-15-6
C-22
GFFs (2), nitrite-treated,
37mm, 2PC
TWA 90
STEL 22.5
TWA 0.25 - 0.5
STEL 1.5
6.25 OSHA ID 214
IC
NC $69 May be sampled up to 480 minutes at 0.25 LPM. Store and
ship media cold. Media has very short shelf life (<5 weeks).
Minimum order of 10 units. Sulfur dioxide gas and airborne
particulate nitrate salts are positive interferences. If SO2 is
known to be present, it can be eliminated by preceding the
filter with an oxidizer tube. Field blank is imperative (two
treated filters per cassette).
PAH Profile
N/A
$- See Polynuclear Aromatic Hydrocarbons
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com84
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
PAH Profile - Selected
Analytes N/A
$- See Polynuclear Aromatic Hydrocarbons - Selected
Analytes.
Paraffin Wax Fumes
8002-74-2
C-06
GFF, 37mm, 1um, 3PC
200 - 600 1 100 OSHA PV2047
GC/FID
NC $77
Particle Characterization/
ID
N/A
1 - 10 grams NA NA EPA/600/M4- 82-
620, Dec. 1982
PLM
NC $102 Morphological examination by PLM. Also see indoor air
quality profiles. Sample types include mini-vac samples,
scrapings, bulk materials in sealed bags, tape lifts, or MCEF
filters.
Particle Sizing, Bulks
N/A
$- Optical microscopy. Please see Section V.5 for details on
multiple size ranges & pricing.
Particulate Matter, <10
microns
N/A
X-13
Hi-Vol GFF, Pre- weighed,
8”x10”, 1um
1585 cubic meter 28 1 mg 40CFR Pt 50
App B Gravimetric
NC $38 Size-selective sampler is required, sampling at the
manufacturer’s specified flow rate. This listing is for a 1
CFM PM10 high volume sampler.
Particulate Matter, <10
microns
N/A
C-40
PEM Sampler PTFE,
Preweighed, 2um
(Anaslide), Serialized
2000
(see notes at right)
Specific to
impactor used
50 EPA IP-10A
Gravimetric
NC $38 This listing is for the SKC PEM PM10 series of impactors,
available for various sampling rates. Air volume of 2000
liters provides testing sensitivity down to 0.050 mg/M3.
Particulate Matter, Total
Suspended
(High Vol Sampler) N/A
X-13
Hi-Vol GFF, Preweighed,
8”x10”, 1um
1585 cubic meter 28 1 mg 40CFR Pt 50
App B Gravimetric
NC $38 Requires high volume sampler at 28 LPM. Filter can also be
analyzed for Lead (Pb) particulates.
Particulates,
Not Otherwise Classified
N/A
$- See Particulates, Total.
Particulate Size Estimate
(Bulk, Surface or Air)
2 Ranges
10 grams <2.5 mm,
≥2.5 mm or
<10 mm,
≥10 mm
Call for
pricing.
Samples are subcontracted to an outside laboratory.
Particulate Size Estimate
(Bulk, Surface or Air)
3 Ranges
10 grams <2.5 mm,
≥2.5 mm or
<10 mm,
≥10 mm
Call for
pricing.
Samples are subcontracted to an outside laboratory.
Particulates, Inhalable
N/A
SKC IOM Sampler
with preweighed
cassette/filter *
960 2.0 500 NIOSH 0500M
GRAV
NA *Preweighed filters/cassettes can be provided with PVC or
PTFE filters, and stainless steel or plastic cassettes. Filter
and cassette choice may depend upon any additional
testing to be performed on the sample. Call lab to discuss
specific situation.
Particulates, Respirable
N/A
C-11 or C-12
PVC, Preweighed, 5um
170 - 1000 See comments 50 NIOSH 0600
Gravimetric
$21 Sampling rate and cassette type vary with cyclone type. SKC
Aluminum Cyclone, 2.5 LPM, C-12 (3-piece cassette). Nylon
Dorr-Oliver Cyclone, 1.7 LPM, C-11 (2-piece cassette).
...........................................
Synonyms: Respirable Particulates Not Otherwise
Regulated, Nuisance Respirable Dust.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com85
"Respirable Silica"
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Particulates, Total
N/A
C-11
PVC, Preweighed, 37mm,
5um, 2PC
50 - 1000 1.0 - 2.0 50 NIOSH 0500
Gravimetric
$21 Three (3) piece preweighed PVC cassette (C-12) is also
suitable. ....
Synonyms: Particulates Not Otherwise Regulated (PNOR),
Nuisance Dust.
Particulates, Total
N/A
C-04
MCEF, 37mm, 0.8um, 3PC,
Matched-weight
50 - 1000 1.0 - 2.0 100 NIOSH 0500
Gravimetric
$21 Matched weight MCE filter; does not require preweighing.
Filter can also be analyzed for metals. Synonyms:
Particulates Not Otherwise Regulated (PNOR), Nuisance
Dust.
Particulates, PM10
N/A
See Particulate matter <10 microns
PCB Caulk/Oil/Water/Soil See Environmental Directory of Services.
PCB
Vapor & Particulate
N/A
$- See Polychlorinated Biphenyls - Vapor & Particulate
PCB
Wipe
N/A
X-PCB
Paper filter, 7cm,
hexane-moistened
100 cm2 2 ug/ wipe SW-846 8082
GC/ECD
S $102 Also See Environmental Directory of Services.
Pentachlorophenol
87-86-5
T-57
GFF/XAD-7 OVS, 226-57
50 - 100 0.2 - 0.5 2 OSHA 39M
HPLC
K $116
n-Pentane
109-66-0
T-01
Charcoal, 226-01
2 0.05 - 0.1 10 NIOSH 1500
GC/FID
A $56
M-3520
3M POVM 3520, 2-stage
Up to 4 hours 15 NIOSH 1500M
GC/FID
A $56
2,4-Pentanedione
123-54-6
$- See Acetylacetone
1-Pentanol
71-41-0
$- See Amyl Alcohol.
2-Pentanone
107-87-9
$- See Methyl Propyl Ketone.
1-Pentyl Acetate
628-63-7
$- See n-Amyl Acetate.
2-Pentyl Acetate
626-38-0
$- See sec-Amyl Acetate.
Perchloroethylene
127-18-4
$- See Tetrachloroethylene.
Perfluoro Pentane
138495-42-8
$- See Decafluoropentane.
Perfluorobutyl Methyl Ether
Isomer mixture
(163702-07-6 &
163702-08-7)
O-91
Carbosieve S-III, Orbo 91
1 Max 0.05 Max 50 OSHA Stopgap
GC/FID
F $56 Store and ship samples cold, analyze ASAP.
Synonym: HFE-7100.
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com86
Analyte CAS # Recommended MediaSuggested
(minutes for passive
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Petroleum Distillates
Customer-provided bulk as
reference standard
General Term
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 50 NIOSH 1550
GC/FID
A $77 Send 5 ml pure distillate separately for standardization. If
no pure distillate bulk is available, see “Petroleum
Distillates, Best-Fit” below.
Petroleum Distillates,
Best-Fit
[No pure distillate bulk
available as reference
standard]
General Term
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 50 NIOSH 1550
GC/FID
A $127 Sample chromatographic peak pattern is compared to in-
house multi-component hydrocarbon mixtures (Stoddard
Solvent, VM&P Naphtha, Mineral Spirits, etc.) to identify
best available reference standard. If no match is found,
results are reported as Total Hydrocarbons as Hexane.
Petroleum Ether
8032-32-4
$- See Naphtha or Petroleum Distillates
PGME
107-98-2
$- See Propylene Glycol Methyl Ether
PGMEA
108-65-6
$- See Propylene Glycol Methyl Ether Acetate
Phenanthrene
85-01-8
K-06
PTFE + ORBO 43
200-1000 2 3 NIOSH 5506
HPLC
N $116 Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Phenol
108-95-2
T-95
XAD-7, 226-95
24 Max 0.1 Max 10 OSHA 32M
HPLC/UV
K $116 Cresols may also be tested from the same sample.
Phenothiazine
92-84-2
C-06
GFF, 37mm, 1um, 3PC
TWA 100
STEL 15
TWA 1.0
STEL 1.0
30 IHGC-P031
GC/FID
NC $77
2-Phenoxyethanol
122-99-6
T-01
Charcoal, 226-01
10 Max 0.2 Max 10 OSHA CSI
GC/FID
E $56
V01 06.2017
Toll Free 800-888-8061
Find more info at www.analyticscorp.com87
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Phenyl Chloroformate
1885-14-9
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
4-Phenyl Cyclohexene
4994-16-5
T-01
Charcoal, 226-01
24 - 100 0.2 0.15 OSHA 7
GC/MS
A $56 Carpet gas irritant.
Phenyl Ether
101-84-8
T-01
Charcoal, 226-01
10 - 50 0.2 10 NIOSH 1617
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0203 15 NIOSH 1617M
GC/FID
A $56
Phenyl Ether / Diphenyl Mix
(eutectic mixture)
101-84-8 & 92-52-4
T-10
Silica Gel, 226-10
1 - 40 0.01 - 0.2 2 ug for each
compound
NIOSH 2013
GC/FID
NC $112 Analyzed and reported separately as Phenyl Ether and
Diphenyl. …………………………………… ….
Synonym: Dowtherm A™
Phenyl Glycidyl Ether
122-60-1
T-01
Charcoal, 226-01
80 - 150 0.1 - 1.0 20 NIOSH 1619
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0222 30 NIOSH 1619M
GC/FID
A $56
m-Phenylenediamine
108-45-2
C-15 GFFs (2),
H2SO4-treated, 37mm, 3PC
100 1 1.3 OSHA 87
HPLC
NC $116 p-Phenylenediamine is reported on 226-30-18
Phosgene
75-44-5
T-153
Amine-treated XAD-2,
226-153
TWA 48
STEL 3
TWA 0.1
STEL 0.2
5 AIHAJ 12/1986,
pp.742-746
GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling. This
method is not sensitive enough to meet NIOSH ceiling REL -
0.2 ppm.T-117
HMP-Treated XAD-2,
226-117
100 - 240 0.5 - 1.0 OSHA 61
GC/NPD
NC Call for
pricing
Samples are subcontracted to an outside laboratory.
Phosphine
7803-51-2
C-9018
GFF/ HgCl2-treated
Polyester, 37mm, 3PC, SKC
PN 225-9018
TWA 240 Max
STEL 30
TWA 1.0 Max
STEL 2
11 OSHA 1003
ICP
NC Call for
pricing
Special order media - call at least one week in advance.
Minimum order of 10 units. Must submit blank.
Phosphoric Acid
7664-38-2
C-05
MCEF, 37mm, 0.8um, 3PC
30 - 960 0.5 - 1.5 10 OSHA ID 111
IC
U $69 Transfer filter to vial within 1 hour of sampling.
T-10-03
Prewashed Silica Gel,
226-10-03
3 - 100 0.5 10 NIOSH 7903
IC
U $69 NIOSH now describes NIOSH Method 7903 as a “historical”
method and does not recommend its use, advocating
instead for a series of filter methods which provide
improved sensitivity and the opportunity for size-selective
sampling of aerosols. NIOSH’s intention is not to invalidate
results developed using NIOSH 7903 in the past, but to
instead transition users to the newer filter methods. Also
see Acid Mist Profile.
T-10-03
Prewashed Silica Gel,
226-10-03
TWA 96
STEL 7.5
TWA 0.5 Max
STEL 0.5
10 OSHA ID1655G
IC/COND
U
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com88
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Phosphorus
(applicable to non-volatile
phosphorus-
containing compounds)
C-05
MCEF, 37mm, 0.8um, 3PC
100 - 1000 1.0 - 3.0 2 NIOSH 7300
ICP
T $40 Not suitable for sampling/analysis of elemental yellow or
white phosphorus.
Phosphorus Trichloride
7719-12-2
IMP-14
MFGB, 15 mL DI Water
25 0.05-0.2 Approx. 7 NIOSH 6402M
ICP
$77
o-Phthalaldehyde
643-79-8
T-119
DNPH-Treated Silica Gel,
226-119
480 Max 0.03 - 1 0.4 JEM,2008, v10.
p1337
HPLC/ UV
NC $116 Store media and samples cold, ship cold overnight. Ozone
may interfere - use ozone scrubber in known ozone
contaminated areas. Any ketone or aldehyde will react with
and deplete the DNPH, and is a potential interference.
Media contains residual acetonitrile which could interfere
with acetonitrile monitoring. Also see Aldehyde profile.
Phthalic Anhydride
85-44-9
C-28
GFFs (2), veratrylamine-
treated, 37mm, 4PC
75 - 100 1.0 Max 2 OSHA 90
HPLC
O $116 Sample open faced. Store media cold. Store samples cold if
not shipped to lab immediately. Media shelf life is 1 month.
Pivaloyl Chloride
3282-30-2
T-153
Amine-treated XAD-2,
226-153
TWA 48 TWA
STEL 3 STEL
TWA 0.1 TWA
STEL 0.2 STEL
5 AIHAJ 12/1986,
pp.742-746 GC/FID
NN $77 Store media and samples cold, ship samples cold overnight.
Samples must arrive at lab within 10 days of sampling.
Synonym: Trimethylacetyl chloride
PIXE SCAN AIR
N/A
C-05
MCEF, 37mm, 0.8um, 3PC
100 - 1000 1.0 - 2.0 NA SPM
PIXE
NC $- Covers element range of sodium to uranium. Samples are
subcontracted to outside laboratory. Analyzed by proton
induced x-ray emission spectroscopy.
PIXE SCAN BULK
N/A
N/A N/A NA SPM
PIXE
NC $- Good scan for unknown bulk materials for elemental
composition. Subcontracted to outside laboratory.
Platinum
7440-06-4
C-05
MCEF, 37mm, 0.8um, 3PC
20 - 1000 1 - 3 2 NIOSH 7300M
ICP
OO $40
Platinum,
Soluble Compounds
Various
C-05
MCEF, 37mm, 0.8um, 3PC
500 - 1000 1 - 3 0.1 NIOSH
S191 ICP/MS
J $75
PM10
N/A
$- See Particulate Matter, <10 microns.
Polychlorinated Biphenyls
- Caulk (PCBs)
See Environmental Testing Directory
Polychlorinated Biphenyls
Oil (PCBs)
See Environmental Testing Directory
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com89
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Polychlorinated Biphenyls
Vapor & Particulate (PCBs)
N/A
K-02
Swinnex GFF +
226-39 + vial
50 0.05 - 0.2
(see notes at
right)
0.2 NIOSH 5503
GC/ECD
NC $153 Transfer filter and Teflon ring to a glass vial immediately
after sampling. At low concentrations samples may be
collected at 1 lpm for up to 24 hours. Sample volume of
>200 liters will measure down to the NIOSH REL = 1 ug/M3.
Polynuclear Aromatic
Hydrocarbons
N/A
K-06
PTFE + ORBO 43
200 - 1000 2 Varies NIOSH 5506
HPLC
N $284 Wrap cassettes in aluminum foil if sampling in bright
sunlight. Transfer filter to glass vial immediately after
sampling, and wrap the vial and tube with aluminum foil to
protect from light. Ship samples cold for overnight delivery.
Profile includes Acenaphthene, Acenaphthylene,
Anthracene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene,
Benzo(a) pyrene, Benz(a)anthracene,
Benzo(b)fluoranthene, Chrysene, Dibenz(a,h)anthracene,
Fluoranthene, Fluorene, Indeno(1,2,3-cd)pyrene,
Naphthalene, Phenanthrene, Pyrene.
Polynuclear Aromatic
Hydrocarbons
Selected Analytes
N/A
C-06
GFF, 37mm, 1um, 3PC
960 2 Varies OSHA 58
HPLC
MM $226 Transfer filters to glass vials after sampling and wrap with
aluminum foil to protect from light. Ship samples by
overnight delivery. Analytes includes Anthracene, Benzo(a)
pyrene, Chrysene, Phenanthrene, Pyrene.
Potassium
7440-09-7
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 1000 1.0 - 3.0 7 NIOSH 7300M
ICP
T $40 Elemental potassium analysis can be used to determine
equivalent concentrations of potassium compounds.
Potassium Borohydride
13762-51-1
C-05
MCEF, 37mm, 0.8um, 3PC
TWA 48-480
STEL 45
TWA 1-3
STEL 3
10 NIOSH 7300M
ICP
$40 On Analysis Request form specify “Boron” analysis and
request results reported as Potassium Borohydride (To
convert Boron results to Potassium Borohydride in the
same units, multiply Boron analysis results by 10. Note: This
test is not chemically specific in that all sources of Boron
will contribute to the total result).
Potassium Hydroxide,
measured as Alkaline dust
1310-58-3
C-66
PTFE, 1um, 37mm, 2PC
70 - 1000 1.0 - 4.0 60 NIOSH 7401
Titration
NC $69 Also see entry for Alkaline Dust. This test provides a single
cumulative measure of all alkaline aerosols present in the
exposure; e.g., sodium hydroxide, potassium hydroxide,
sodium bicarbonate, calcium carbonate, etc. The acid-base
titration test is not compound-specific, but the result will
be expressed in terms of the alkaline compound identified
on the test request form. Acid compounds present in the
sampling environment will be negative interferences in the
measurement.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com90
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Potassium Hydroxide (by
elemental potassium
analysis with KOH-
equivalent calculation)
1310-58-3
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 1000 1.0 - 3.0 3.6 NIOSH 7300M
ICP/MS
T $46 Elemental analysis for potassium is performed, and a
potassium hydroxide equivalent result is calculated. Other
potassium compounds are a positive interference. Mineral
acids will not interfere.
Potassium Persulfate,
As Persulfate
7727-21-1
C-05
MCEF, 37mm, 0.8um, 3PC
TWA 480-960
STEL 60
TWA 1-4
STEL 4
0.5 NIOSH 7300
ICP
$40 Wen submitting samples specify analysis for “Potassium
Persulfate, AS PERSULFATE” in order to have results
reported correctly as persulfate. This test is not chemically
specific; all sources of Potassium will contribute to the total
result.
Primene 81R® Amine
68955-53-3
T-93
XAD-4, 226-93
TWA 10
STEL 3
0.025-0.2 13 IN-HOUSE
GC/FID
K $77 Store samples in chemical refrigerator if not immediately
shipped for analysis.
2-Propanol See Isopropanol.
2-Propenol
107-18-6
$- See Allyl Alcohol.
Propionaldehyde
123-38-6
T-119
DNPH-Treated Silica Gel,
226-119
1 - 30 0.05 - 0.5 0.5 TO-11
HPLC
N $116 Any ketone or aldehyde will react with the DNPH and is a
potential interference. Large concentrations of acetone or
MEK will compete with the aldehyde and are therefore
potential negative interferences. Refrigerate before and
after sampling and ship overnight. Also see aldehyde
profiles.
Propionic Acid
79-09-4
T-10-03
Prewashed Silica Gel,
226-10-03
1 - 24 0.05 - 0.2 10 NIOSH 2011M
IC/Cond.
V $69
1-Propoxy-2-Propanol
30136-13-1
$- See Propylene Glycol Propyl Ether.
2-Propoxyethanol See Ethylene glycol monopropyl ether
n-Propyl Acetate
109-60-4
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 10 NIOSH 1450
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0301 15 NIOSH 1450M
GC/FID
A $56
n-Propyl Alcohol
71-23-8
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 20 NIOSH 1401
GC/FID
C $56 Synonyms: 1-Propyl alcohol, 1-Propanol.
M-3500
3M POVM, 3500
Up to 6 hours 0.0397 30 NIOSH 1401M
GC/FID
C $56 Synonyms: 1-Propyl alcohol, 1-Propanol.
Propyl Bromide
106-94-5
$- See 1-Bromopropane
2-Propylbromide
75-26-3
$- See 2-Bromopropane
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com91
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Propylene Dichloride
78-87-5
T-81
Anasorb 747, 226-81
1 - 3.5 0.01 - 0.2 20 NIOSH 1013M
GC/FID
NC $77 Synonym: 1,2-Dichloropropane.
M-3500
3M POVM, 3500
Up to 8 hours 0.0306 30 NIOSH 1013M
GC/FID
NC $77 Synonym: 1,2-Dichloropropane.
Propylene Glycol
57-55-6
T-57
GFF/XAD-7 OVS, 226-57
5 - 60 0.5 - 2.0 20 NIOSH 5523
GC/FID
K $77 Also see Glycol Profile.
Propylene Glycol
n-Butyl Ether
5131-66-8
T-01
Charcoal, 226-01
5 - 10 0.1 20 OSHA 99M
GC/FID
E $56 Synonyms: 1-Butoxy-2-Propanol, also DOWANOL® PnB
M-3500
3M POVM, 3500
Up to 8 hours 0.0258 30 OSHA 99M
GC/FID
E $56 Synonym: 1-Butoxy-2-propranol
Propylene Glycol Methyl
Ether
107-98-2
T-01
Charcoal, 226-01
5 - 10 0.1 20 OSHA 99
GC/FID
E $56 Synonyms: 1-Methoxy-2-Propanol, PGME.
M-3500
3M POVM, 3500
Up to 8 hours 0.0324 30 OSHA 99M
GC/FID
E $56 Synonyms: 1-Methoxy-2-Propanol, PGME.
Propylene Glycol Methyl
Ether Acetate
108-65-6
T-01
Charcoal, 226-01
5 - 10 0.2 20 OSHA 99
GC/FID
E $56 Synonyms: 1-Methoxy-2-Propyl Acetate, PGMEA, Dowanol
PMA
M-3500
3M POVM, 3500
Up to 8 hours 0.0252 30 OSHA 99M
GC/FID
E $56 Synonyms: 1-Methoxy-2-Propyl Acetate, PGMEA.
Propylene Glycol Propyl
Ether
1569-01-3
T-01
Charcoal, 226-01
10 0.1 20 OSHA 7
GC/FID
E $56 Synonyms: n-Propoxypropanol, 1-Propoxy-2-Propanol,
Propasol P.
Propylene Oxide
75-56-9
T-01
Charcoal, 226-01
5 0.05 - 0.2 20 NIOSH 1612
GC/FID
A $56
M-3520
3M POVM 3520, 2-stage
Up to 8 hours 0.0377 30 NIOSH 1612M
GC/FID
A $56
Pseudocumene
95-63-6
$- See 1,2,4-Trimethylbenzene.
Pyrene
129-00-1
K-06
PTFE + ORBO 43
200-1000 2 3 NIOSH 5506
HPLC
N $116 Wrap cassettes with foil if sampling in bright sunlight.
Transfer filter to glass vial immediately after sampling, and
wrap tube and vial with aluminum foil to protect from light.
Store samples cold and ship samples cold for overnight
delivery.
Pyrethrum
8003-34-7
C-06
GFF, 37mm, 1um, 3PC
20 - 400 1.0 - 4.0 0.2 NIOSH 5008
HPLC
NC $116
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com92
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Pyridine
110-86-1
T-01
Charcoal, 226-01
18 - 150 0.01 - 1.0 10 NIOSH 1613
GC/FID
I $56
Pyrrolidine
123-75-1
T-30-18
NITC-Treated XAD-2,
226-30-18
1 - 20 0.01 - 0.1 2 NIOSH 2540M
HPLC
N $160 Contact laboratory before sampling and/or sending
samples. Ship samples immediately after sampling (next
day delivery).
Quartz
14808-60-7
$- See Silica - Crystalline Profile
Quinone
106-51-4
T-30
XAD-2 Tube, 226-30
TWA 24
STEL 3
TWA 0.01-0.2
STEL 0.2
2 NIOSH S181M
HPLC/UV
NC $116 Samples must be analyzed within 7 days.
Refractory Ceramic Fibers
N/A
$- See Fiber Count, Total - “A” counting rules.
Refrigerant 11
75-69-4
$- See Trichlorofluoromethane.
Refrigerant 113
76-13-1
$- See 1,1,2-Trichloro-1,2,2-Trifluoroethane.
Refrigerant 114
76-14-2
$- See 1,2-Dichloro-1,1,2,2-Tetrafluoroethane.
Refrigerant 12
75-71-8
$- See Dichlorodifluoromethane.
Refrigerant 123
306-83-2
$- See 2,2-Dichloro-1,1,1-Trifluoroethane.
Refrigerant 134a
811-97-2
$- See 1,1,1,2-Tetrafluoroethane.
Refrigerant 141b
1717-00-6
$- See 1,1-Dichloro-1-Fluoroethane.
Refrigerant 21
75-43-4
$- See Dichlorofluoromethane. Note low recommended air
volumes.
Refrigerant 22
75-45-6
$- See Chlorodifluoromethane.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com93
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Refrigerant 225 ca & cb
135151-96-1
T-09 (2)
Charcoal, 226-09
1 - 4 0.01 - 0.05 20 NIOSH 1018M
GC/FID
I $76 Each component (ca & cb) reported separately. Two (2)
tubes in series. Second tube can be smaller 226-01. Also
known as HCFC 225, AK-225 (TM) and
dichloropentafluoropropane. HCFC-225 ca =
3,3-dichloro-1,1,1,2,2-pentafluoropropane (CAS 422-
56-0), HCFC-225cb = 1,3-di- chloro-1,1,2,2,3-
pentafluoropropane (CAS 507-55-1).M-3520
3M POVM 3520, 2-stage
Up to 8 hours 0.0279 30 NIOSH 1018M
GC/FID
l $76 Each component (ca & cb) reported separately. Also known
as HCFC 225, AK-225 (TM) and
dichloropentafluoropropane. HCFC-225 ca = 3,3-dichloro-
1,1,1,2,2-pentafluoropropane (CAS 422-56-
0), HCFC-225cb = 1,3-di- chloro-1,1,2,2,3-
pentafluoropropane (CAS 507-55-1).
Refrigerant 43
138495-42-8
$- See Decafluoropentane.
Resorcinal
108-46-3
T-57
13 mm GFF + 200/100
XAD-7 OVS, 226-57
60 Max 1 Max 50 OSHA PV2053
GC/FID
K $110
Rhodium
7440-16-6
C-05
MCEF, 37mm, 0.8um,
3PC
960 Max 2 Max 2 NIOSH 7300M
ICP-OES
T
Rhodium, water-soluble
compounds
NA
C-05
MCEF, 37mm, 0.8um,
3PC
960 Max 2 Max 0.05 NIOSH
7300M
J
Ribavirin
36791-04-5
C-06
GFF, 37mm, 1um, 3PC
40 - 1000 1.0 - 3.0 1 NIOSH 5027
HPLC
NC $116 Not chemically specific.
Sebacic Acid
as Particulate
111-20-6
C-11
PVC, Preweighed, 37mm,
5um, 2PC
100-480 1-4 50 NIOSH 0500
Gravimetric
NC $21
Selenium
7782-49-2
C-05
MCEF, 37mm, 0.8um,
3PC
40 - 1000 1.0 - 3.0 1 NIOSH 7300
ICP-OES
T $40
C-05
MCEF, 37mm, 0.8um,
3PC
40 - 1000 1.0 - 3.0 0.125 NIOSH 7300
ICP-MS
T $46
Sevin/Carbaryl
63-25-2
T-30-16
GFF/XAD-2 OVS,
226-30-16
60 Max 1.0 Max 5 OSHA 63
HPLC/UV
NC $116
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com94
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Sevoflurane
28523-86-6
T-81
Anasorb 747, 226-81
3 Max 0.05 Max 20 OSHA 103M
GC/FID
CC $77
M-02
SKC POVM, 575-002
See note at right 40 OSHA 103M
GC/FID
A $77 Not recommended due to reverse diffusion.
M-3520
3M POVM 3520, 2-stage
Up to 8 hours 0.0273 30 OSHA 7M
GC/FID
A $77
Silane
A-189
See entry for Mercaptopropyltrimethoxysilane, Gamma
Silica - Amorphous
(Diatomaceous Earth), Total
7631-86-9
C-11 or C-12
PVC, Preweighed, 37mm,
5um, 2PC
816-1320 2-4 NIOSH 7501
XRD
NC Call for
pricing
Samples are subcontracted to outside laboratory.
Silica - Amorphous (Fume),
Respirable
69012-64-2
C-12
PVC, Preweighed, 37mm,
5um, 3PC
816-1300 Dependent on
cyclone type
NIOSH 7501
XRD
NC Call for
pricing
Silica - Cristobalite
14464-46-1
$- See Silica, Crystalline Profile
Silica - Crystalline Profile
Multiple
C-11 or C-12
PVC, Preweighed, 37mm,
5um, 2PC
816-1200 See comments 5
(each
polymorph)
NIOSH 7500
XRD
NC $98 *Sampling rate is dependent on cyclone used - SKC
Aluminum Cyclone - 2.5 LPM, Nylon Dorr-Oliver Cyclone -
1.7 LPM. Preweighed PVC filters are specified so that
overall filter loading can be addressed correctly during
sample prep. Samples are stable (no stated hold time limit).
Profile includes gravimetric analysis, quartz (14808-60-7),
cristobalite (14464-46-1), and tridymite (15468-32-3).
Interferences include any compound that has a diffraction
line that coincides with the primary or secondary lines of
quartz. Common interferences are bauxite, mica, potash,
feldspar, graphite, and zircon.
Silica - Crystalline Bulk
Multiple
Vial or bag 2 - 5 gms N/A 1.0% NIOSH 7500
XRD
NC $134 Profile includes quartz (14808-60-7), cristobalite (14464-46-
1), and tridymite (15468-32-3). Interferences include any
compound that has a diffraction line that coincides with
the primary or secondary lines of quartz. Common
interferences are bauxite, mica, potash, feldspar, graphite,
and zircon.
Silica - Fused, Respirable
60676-86-0
C-12
PVC, Preweighed, 37mm,
5um, 3PC
800-1300 Dependent on
cyclone type
5 NIOSH 7501
XRD
NC $- Samples are subcontracted to outside laboratory.
Silica - Quartz
14808-60-7
$- See Silica, Crystalline Profile
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com95
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Silicon Tetrahydride
(Silane)
7803-52-3
IMP-15
MFGB, 15 mL 0.01N KOH
380 - 400 0.8 1 NIOSH 7300M
ICP
NC $40 Analysis is for dissolved silicon. Since the Midget Fritted
Glass Bubbler (MFGB) is glass, creation and submission of a
field blank is critical; maintain the field blank solution in the
MFGB for same duration as samples. Transfer to plastic vial
immediately after sampling. All other hydrolyzable silicon
hydrides will interfere, as will soluble particulate silicates.
Also submit a portion of unused collecting solution for
testing as a Reagent Blank.
Silver, Metal and Soluble
Compounds
7440-22-4
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 2000 1.0 - 3.0 1 NIOSH 7300
ICP
T $40
C-05
MCEF, 37mm, 0.8um,
3PC
51 - 2000 1.0 - 3.0 0.025 NIOSH 7300M
ICP/MS
T $46
Skane M-8 (R) Biocide
26530-20-1
$- See Kathon 893™ Biocide.
Sodium
7440-23-5
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 1000 1.0 - 3.0 2.5 NIOSH 7300M
ICP
T $40 Blank is important to correct for amount of sodium found
in MCE filters.
Sodium Bisulfite
as Particulate
7631-90-5
C-11 or C-12
PVC, Preweighed, 37mm,
5um, 2PC
960-1920 2-4 50 NIOSH 0500
Gravimetric
NC $21 Not chemically specific.
Sodium Borohydride
16940-66-2
C-05
MCEF, 37mm, 0.8um,
3PC
TWA 48-480
STEL 45
TWA 1-3
STEL 3
7 NIOSH 7300M
ICP for B
T $77 On Analysis Request form specify “Boron” analysis and
request results reported as Sodium Borohydride (To
convert Boron results to Sodium Borohydride in the same
units, multiply Boron analysis results by 3.5. Note: This test
is not chemically specific in that all sources of Boron will
contribute to the total result).
Sodium Cyanoborohydride
25895-60-7
C-05
MCEF, 37mm, 0.8um,
3PC
TWA 48-480
STEL 45
TWA 1-3
STEL 3
12 NIOSH 7300M
ICP for B
T $77 On Analysis Request form specify “Boron” analysis and
request results reported as Sodium Cyanoborohydride (To
convert Boron results to Sodium Cyanoborohydride in the
same units, multiply Boron analysis results by 5.83. Note:
This test is not chemically specific in that all sources of
Boron will contribute to the total result).
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com96
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Sodium Hydride
7646-69-7
C-08
PTFE, 37mm, 2um, 3PC
TWA 480
STEL 60
TWA 1-4
STEL 4
0.25 NIOSH 7300M
ICP
T $77 Note: Obtain low sodium (pre-rinsed) Teflon filters from
lab. Submit 3 blanks along with each group of samples in
order to adequately correct for sodium background and
avoid false positives. Request analysis for “sodium”, to be
reported as “sodium hydride". The ACGIH states that if
instantaneous monitoring is not feasible, ceiling values
“can be assessed by sampling over a period that should not
exceed 15 minutes, except for those substances that may
cause immediate irritation when exposures are short.” Not
chemically specific.
Sodium Hydrosulfite
as Particulate
7775-14-6
C-11
PVC, Preweighed, 37mm,
5um, 2PC
TWA 100-480
STEL 60
1-4 50 NIOSH 0500
Gravimetric
NC $21 Analysis is not compound-specific.
Sodium Hydroxide,
measured as Alkaline Dust
1310-73-2
C-66
PTFE, 1um, 37mm, 2PC
45 - 1000 1.0 - 4.0 40 NIOSH 7401
Titration
NC $69 Also see Alkaline Dust as NaOH. This test provides a single
cumulative measure of all alkaline aerosols present in the
exposure; e.g., sodium hydroxide, potassium hydroxide,
sodium bicarbonate, calcium carbonate, etc. The acid-base
titration test is not compound-specific, but the result will
be expressed in terms of the alkaline compound identified
on the test request form. Acid compounds present in the
sampling environment will be negative interferences in the
measurement.
Sodium Hydroxide
(calculated from measured
sodium concentration)
1310-73-2
C-05
MCEF, 37mm, 0.8um, 3PC
50 - 1000 1.0 - 3.0 4.5 NIOSH 7300M
ICP
T $40 Elemental analysis for sodium is performed, and a sodium
hydroxide equivalent result is calculated. Other sodium
compounds are a positive interference. Mineral acids will
not interfere.
Sodium Persulfate,
as Persulfate
7775-27-1
C-08
PTFE, 37mm, 2um, 3PC
TWA 480-960
STEL 60
TWA 1-4
STEL 4
40 NIOSH 7300
ICP
T $40 Request analysis of “Sodium Persulfate, AS PERSULFATE” in
order to have results reported correctly as persulfate (To
convert “Sodium” results to “Sodium Persulfate, as
Persulfate”, multiply by 4.18).
Solder Operations Profile
N/A
C-05
MCEF, 37mm, 0.8um,
3PC
480 - 960 1.0 - 3.0 Varies OSHA ID-206
ICP
NC $127 Includes Antimony, Beryllium, Cadmium, Copper, Lead,
Silver, Tin, Zinc Oxide. 960 liters needed to determine silver
at the TLV.
Solvesso 100
N/A
$- See Aromatic 100
Solvesso 150
N/A
$- See Aromatic 150
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com97
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Stearic Acid
as Particulate
57-11-4
C-11
PVC, Preweighed, 37mm,
5um, 2PC
100-480 1-4 50 NIOSH 0500
Gravimetric
$21 Test is not chemically specific.
Stoddard Solvent
8052-41-3
T-01
Charcoal, 226-01
1 - 20 0.01 - 0.2 50 OSHA 48
GC/FID
A $77 Ship a 5 ml bulk sample separately.
M-3500
3M POVM, 3500
Up to 8 hours 0.0243 75 NIOSH 1550M
GC/FID
A $77 Ship a 5 ml bulk sample separately.
Strontium
7789-06-2
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 1000 1.0-3.0 2 NIOSH 7300M
ICP
T $40
Strontium Chromate
(as Cr VI)
133-82-0
$- See Chromium, Hexavalent.
Styrene
100-42-5
T-01
Charcoal, 226-01
5 - 15 0.05 - 0.2 40 NIOSH 1501
GC/FID
A $56
T-73
TBC-Treated charcoal,
226-73
0.75 - 15 0.05 - 0.2 40 OSHA 89M
GC/FID
CC $56 Recommended method due to improved desorption
efficiency.
M-3500
3M POVM, 3500
Up to 8 hours 0.0289 60 OSHA 09M
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10 STEL
3
TWA 0.03-0.2
STEL 0.2
3.1 Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hrs (Max)
STEL 15 min
0.014 5.3 Proprietary,
IHGC-P029
GC/FID
A $77
Sulfate Particulate
N/A
C-05
MCEF, 37mm, 0.8um,
3PC
30 - 100 0.5 - 1.5 5 NIOSH 6004
IC
U $69 Test is not compound-specific; all water soluble sulfates,
including sulfuric acid, are measured.
Sulfur Dioxide
7446-09-5
K-05
KOH-treated Anasorb 747,
226-80
12-24 0.1 8.33 OSHA ID 200
IC
NC $69 Do not return pre-filter for analysis unless soluble sulfate
particulates are needed. Extra charge applies.
C-25
MCE/Na2CO3-treated filter,
37mm, 4PC
22.5-200 0.5 - 1.5 7 NIOSH 6004
IC
NC $69 15 minute sample at 1.5 LPM measures down to 0.12 ppm
SO , approx. 50% of ACGIH STELTLV.2
Sulfur Dioxide
7446-09-5
M-UMEX-200
SKC UMEX SO2/ NO2
PM 500-100
15 min - 8 hrs 0.0151 2 SKC #40108
rev. 1102
IC/COND
NC $69 Samples may be tested for nitrogen dioxide also. Return to
aluminized pouch after sampling and seal for storage and
shipping. Samples are stable at ambient temperature for at
least 3 weeks after sampling.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com98
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Sulfur Dioxide & Particulate
Water Soluble Sulfates
7446-09-5
C-25
MCE/Na-2CO3-treated
filter, 37mm, 4PC
22.5 -200 0.5 - 1.5 7 NIOSH 6004
IC
NC $116 Sulfur trioxide gas, if present in dry atmospheres, may give
a positive interfere. Built-in prefilter may be tested for
water-soluble sulfate/sulfite particulates if needed.
Sulfur Hexafluoride
2551-62-4
Call lab - NIOSH S244
GC/MS
Call for
pricing
WARNING - DO NOT SHIP BY AIR. Samples are
subcontracted to outside laboratory.
Sulfuric Acid
7664-93-9
C-05
MCEF, 37mm, 0.8um,
3PC
30 - 480 0.5 - 2.0 5 OSHA ID 113
IC
U $69 Recommended method. Transfer filter to V-15 vial within 1
hour of sampling.
T-10-03
Prewashed Silica Gel,
226-10-03
30 - 100 0.2 - 0.5 5 NIOSH 7903
IC
U $69 NIOSH now describes NIOSH Method 7903 as a “historical”
method and does not recommend its use, advocating
instead for a series of filter methods which provide
improved sensitivity and the opportunity for size-selective
sampling of aerosols. NIOSH’s intention is not to invalidate
results developed using NIOSH 7903 in the past, but to
instead transition users to the newer filter methods. Also
see Acid Mist Profile.
T-10-03
Prewashed Silica Gel,
226-10-03
TWA 96
STEL 7.5
TWA 0.5 Max
STEL 0.5
5 OSHA ID1655G
IC/COND
U
Talc
Respirable Fraction
(containing no asbestos,
Crystalline silica <1%)
14807-96-6
*C-11 or C-12
*PVC, Preweighed, 37mm,
5um, 2PC
*816 - 1300 *See
comments
100 NIOSH 7500
Mod. XRD
W $98 *Cassette type (2- or 3-piece) and sampling rate is
dependent on cyclone used - SKC Aluminum Cyclone - 2.5
LPM, Nylon Dorr-Oliver Cyclone - 1.7 LPM. Gravimetric
analysis alone may be sufficient for assessment. Any
mineral having similar x-ray diffraction spectra may
interfere.
TAME
994-05-8
$- See t-Amyl Methyl Ether
TCE
79-01-6
$- See Trichloroethylene
TDI, 2,4 & 2,6
584-84-9
$- See Toluene Diisocyanate
Tellurium
13494-80-9
C-05
MCEF, 37mm, 0.8um,
3PC
80 - 1000 1.0 - 3.0 2 NIOSH 7300
ICP
T $40
p-Tert-Butyl Toluene
98-51-1
T-01
Charcoal, 226-01
10 - 30 0.01 - 0.2 20 NIOSH 1501 GC/FID A $56
1,1,2,2-Tetrabromoethane
79-27-6
T-10
Silica Gel, 226-10
50 - 100 0.2 - 1.0 20 NIOSH 2003 GC/FID W $56
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com99
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1,1,2,2-Tetrachloroethane
79-34-5
M-3500
3M POVM, 3500
Up to 8 hours 0.028 40 NIOSH 1019M
GC/FID
A $77 Synonym: Acetylene Trichloride.
M-01
SKC POVM, 575-001
8 Hrs 0.012 40 NIOSH 1019M
GC/FID
A $77
T-81
Anasorb 747, 226-81
3 - 30 0.01-0.2 20 NIOSH 1019
GC/FID
A $77
Tetrachloroethylene
127-18-4
T-01
Charcoal, 226-01
0.2 - 40 0.01 - 0.2 20 NIOSH 1003 GC/FID A $56 Synonyms: Perchloroethylene, Trerachloroethene
M-3500
3M POVM, 3500
Up to 8 hours 0.0283 30 NIOSH 1003M
GC/FID
A $56
Tetraethyl Lead
(as Pb)
78-00-2
T-16
Charcoal, 226-16
30 - 200 0.01 - 1.0 0.8 Ethyl Corp. Method
ICP/OES
NC $77 Needs prefilter if airborne particulate lead is present;
contact lab for this prefilter. All other volatile lead organic
vapors will interfere.
T-01
Charcoal, 226-01
480 Max 1.0 Max 0.8 OSHA Stopgap
Modified
ICP/OES
NC $77 Needs prefilter (C-06) if airborne particulate lead is present;
contact lab for this prefilter. All other volatile lead organic
vapors will interfere.
1,1,1,2-Tetrafluoroethane
811-97-2
T-01 (2 in series)
Charcoal, 226-01,
2 in series
0.5 - 2.0 0.01 - 0.035 50 NIOSH 1020M
GC/FID
A $77 Cap tubes separately after sampling. ……… ……..
Synonym: Refrigerant 134a.
Tetrahydrofuran (THF)
109-99-9
T-01
Charcoal, 226-01
1 - 9 0.01 - 0.2 10 NIOSH 1609
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0372 20 NIOSH 1609M
GC/FID
A $56
Tetramethylsuccino Nitrile
3333-52-6
T-01
Charcoal, 226-01
55 Max 0.05 - 1.0 10 NIOSH S155
GC/FID
A $77 Synonym: TMSN.
TGIC
2451-62-9
$- See Triglycidyl Isocyanurate.
Thallium
7440-28-0
C-05
MCEF, 37mm, 0.8um,
3PC
80 - 1000 1.0 - 3.0 2 NIOSH 7300
ICP
T $40
C-05
MCEF, 37mm, 0.8um,
3PC
80 - 1000 1.0 - 3.0 0.025 NIOSH 7300M
ICP/MS
T $46
Tin
7440-31-5
C-05
MCEF, 37mm, 0.8um,
3PC
20 - 1000 2.0 2 OSHA ID 125
ICP-OES
EE $40
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com100
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Tin
Total Organotin Compounds
as Tin
Various
T-30-16
GFF/XAD-2 OVS,
226-30-16
50 - 500 1.5 Max 0.5 NIOSH 5504M
GFAA
NC $237 Store samples cold and ship cold by overnight delivery. The
organotin compound being monitored must be identified
to the laboratory, and a reference standard must be
available for the testing. Additional charges may apply for
procurement of the reference standard, or it may be
necessary for the customer to provide a small portion (1 - 2
grams) of the relatively-pure organotin compound along
with the known purity. A 3-sample-minimum charge
applies for this test. Samples are extracted with an
acidified organic solvent, and the extracts are tested for
dissolved tin, but the testing is not compound-specific. This
method will not work for the most volatile organotin
compounds; see separate entries for methyltin trichloride,
dimethyltin dichloride, and trimethytin chloride by NIOSH
5526.
Titanium
7440-32-6
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 1000 1.0 - 3.0 2 OSHA ID 125
ICP
EE $40
Titanium Dioxide
13463-67-7
C-05
MCEF, 37mm, 0.8um,
3PC
100 - 1000 2 3.3 OSHA ID 125
ICP
EE $40 Analysis is for Total Titanium, with calculated equivalent as
TiO2 reported.
TMSN
3333-52-6
$- See Tetramethyl Succinonitrile
Toluene
108-88-3
T-01
Charcoal, 226-01
2 - 15 0.02 - 0.2 10 NIOSH 1501
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0314 15 NIOSH 1501M
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
TWA 0.03-0.2
STEL 0.2
1 Proprietary,
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
10 - 240 min 0.015 2 Proprietary,
IHGC-P029
GC/FID
A $77
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com101
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Toluene Diisocyanate,
2,4 & 2,6
584-84-9 & 91-08-7
K-20
OSHA Isocyanate Kit for
Field Desorption
(see description at right).
15 - 240 0.2 - 1.0 0.12 OSHA 42
HPLC/FL
O $116 Sample open faced. Refrigerate media before and after
sampling. Ship samples cold by overnight delivery. Testing
is for both 2,4- and 2,6-TDI isomers. Media is marked with
expiration date, and will ship with at least 1-month shelf
life (stored cold). See comments that follow regarding field
desorption of samples.
The OSHA National Emphasis Program (now closed)
specified field desorption immediately after sampling; the
intended purpose was improving recovery of collected
diisocyanates, particularly those in aerosol form. The K-20
kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v)
acetonitrile/dimethyl sulfoxide, tweezers(2), rack,
instruction set, SDS for solution. Cold sample shipment
after extraction is not required, but extracted samples
should ship to lab as soon as possible. Extracts may be
stored in refrigeration for up to a week before shipment if
unavoidable. Dangerous goods shipping requirements
apply. Contact lab for more specifics.
o-Toluidine
95-53-4
T-10
Silica Gel, 226-10
10 - 150 0.02 - 1 20 NIOSH 2002
GC/FID
M $56
Total Hydrocarbons, as
n-Hexane (VOCs)
N/A
$- See Hydrocarbons, Total as n-Hexane
Total Hydrocarbons, as
n-Hexane, High Resolution
N/A
$- See Hydrocarbons, Total as n-Hexane - High Resolution.
Tribromomethane
75-25-2
$- See Bromoform.
Tributyl phosphate
126-73-8
C-05
MCEF, 37mm, 0.8um,
3PC
90 1.5 2 NIOSH 5034
GC/MS
NC Call for
pricing
Samples subcontracted to outside laboratory.
1,2,4-Trichlorobenzene
120-82-1
K-11
C-45 Cassette + 226-30-04
tube, Tubing Adapter and
15mL Vial
3 - 12 0.01 - 0.2 0.1 NIOSH 5517
GC/ECD
S $102 Transfer filter to vial after sampling; cassette may be
omitted if no aerosols are present. Samples are stable at
least 13 days at ambient temperature.
1,1,1-Trichloroethane
71-55-6
$- See methyl chloroform
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com102
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1,1,2-Trichloroethane
79-00-5
T-01
Charcoal, 226-01
2 - 10 0.01 - 0.2 10 NIOSH 1003M
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0297 30 NIOSH 1003M
GC/FID
A $56
Trichloroethene
79-01-6
$- See trichloroethylene.
Trichloroethylene
79-01-6
T-01
Charcoal, 226-01
1 - 30 0.01 - 0.2 10 NIOSH 1022M
GC/FID
A $56
M-3500
M POVM, 3500
Up to 8 hours 0.0311 15 NIOSH 1022M
GC/FID
A $56
Trichlorofluoromethane
75-69-4
T-09
Charcoal, 226-09
0.3 - 7 0.01 - 0.05 50 NIOSH 1006
GC/FID
A $77 Ship cold overnight. ………………….. …………. ….
Synonym: Refrigerant 11.
1,1,2-Trichloro-1,2,2-
trifluoroethane
76-13-1
T-01
Charcoal, 226-01
0.1 - 3 0.01 - 0.05 20 NIOSH 1020
GC/FID
A $77
M-3520
3M POVM 3520, 2-stage
1 Hour 0.0291 30 NIOSH 1020M
GC/FID
A $77
Triethanolamine
102-71-6
C-06
GFF, 37mm, 1um, 3PC
120 1 40 OSHA PV2141
GC/FID
NC $77
Triethylamine
121-44-8
T-10-06
H2SO4-Treated Silica Gel,
226-10-06
TWA 10
STEL 3
0.2 Max 20 OSHA PV2060M
IC
NC $102 Submit for analysis as soon as possible after sampling. If
delay is unavoidable, store cold and ship cold by overnight
delivery.
T-98
H3PO4-treated XAD-7,
226-98
20 Max 0.2 Max 20 OSHA PV2060M
IC
NC $102 Submit for analysis as soon as possible after sampling. If
delay is unavoidable, store cold and ship cold by overnight
delivery. A minimum volume of 3 Liters is required for STEL
sampling.
Triethylene Glycol
112-27-6
T-57
GFF/XAD-7 OVS, 226-57
60 - 200 0.5 - 1.0 20 NIOSH 5523
GC/FID
JJ $77 Also see Glycol Profile.
Triethylenetetramine
112-24-3
T-30-18
NITC-Treated XAD-2,
226-30-18
10 Max 0.1 Max 10 OSHA 60
HPLC/UV
N $116 Store media cold before sampling. Samples stable at
ambient temperature for at least 15 days.
Trifluoroacetic Acid
76-05-1
T-10-03
Prewashed Silica Gel,
226-10-03
100 Max 0.5 Max 20 NIOSH 7903M
IC
U $69
1,3,5-Triglycidyl
Isocyanurate
2451-62-9
C-51
GFF, HBr Treated, 37mm,
2PC
60 Max 1 Max 1.5 OSHA PV2055M
HPLC
NC $141 Synonym: 1,3,5-Triglycidyl-s-triazinetrione, TRIG
Triisobutyl Phosphate
126-71-6
T-10-03
Prewashed Silica Gel,
226-10-03
60 - 120 0.15 - 0.3 IN-HOUSE
GC/MS
NC Call for
pricing
Samples are subcontracted to outside laboratory.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com103
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Triisopropanolamine as
Particulate
122-20-3
C-11
PVC, Preweighed, 37mm,
5um, 2PC
TWA 100-480
STEL 60
TWA 1-4
STEL 4
50 NIOSH 0500
Gravimetric
$20 Not chemically specific.
Trimellitic Anhydride
552-30-7
C-28 GFFs (2),
amine-treated, 37mm, 4PC
30 - 480 2 Max 0.5 OSHA 98M
HPLC/UV
NC $116 Sample open-face. Media has 1-month shelf life. Store in
refrigeration and ship as soon as possible after sampling.
1,2,3-Trimethyl Benzene
526-73-8
T-01
Charcoal, 226-01
10 - 30 0.01 - 0.2 10 NIOSH 1501
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 15 NIOSH 1501
GC/FID
A $56
1,2,4-Trimethyl Benzene
95-63-6
T-01
Charcoal, 226-01
10 - 30 0.01 - 0.2 10 NIOSH 1501
GC/FID
A $56 Synonym: Pseudocumene
M-3500
3M POVM, 3500
Up to 8 hours 0.0244 15 NIOSH 1501
GC/FID
A $56
1,3,5-Trimethyl Benzene
108-67-8
T-01
Charcoal, 226-01
10 - 30 0.01 - 0.2 10 NIOSH 1501
GC/FID
A $56 Synonym: Mesitylene
M-3500
3M POVM, 3500
Up to 8 hours 0.0263 15 NIOSH 1501 GC/FID A $56
2,2,4-Trimethyl Pentane
540-84-1
$- See Isooctane.
Trimethylamine
75-50-3
T-10-06
H2SO4-Treated Silica Gel,
226-10-06
5 - 10 0.05 - 0.1 4 NIOSH 6016M
IC
NC $69 Submit for analysis as soon as possible after sampling. If
delay is unavoidable, store cold and ship cold by overnight
delivery.
T-98
H3PO4-treated XAD-7,
226-98
TWA 20 Max
STEL 3.0
TWA 0.05-0.2
STEL 0.2
4 OSHA PV2060
IC
NC $69 Submit for analysis as soon as possible after sampling. If
delay is unavoidable, store cold and ship cold by overnight
delivery.
Trimethylolpropane
Triacrylate
15625-89-5
T-95
XAD-7, 226-95
10 0.02 3.5 OSHA CSI
HPLC/UV
NC Call for
pricing
Samples are subcontracted to outside laboratory.
2,4,4-Trimethylpentene
25157-70-8
$- See Diisobutylene.
Trimethyltin Chloride
1066-45-1
T-30-16
GFF/XAD-2 OVS,
226-30-16
TWA 15-75
STEL 15 (Max)
TWA 0.25
STEL 1.0
0.1 NIOSH 5526
GC/FPD
NC Call for
pricing
Note: This is a labor-intensive analysis requiring a
dedicated instrument and there is a 3 sample minimum.
Analysis available for the following agents on one sample:
methyltin dichloride, dimethyltin dichloride, and
trimethyltin chloride. Samples are subcontracted to outside
laboratory.
Triorthocresyl Phosphate
78-30-8
C-05
MCEF, 37mm, 0.8um,
3PC
150 1.5 Max 2 NIOSH S209M
GC/MS
NC $160
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com104
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
1,1,1 Tris(hydroxymethyl)
Propane
77-99-6
See Trimethylolpropane Triacrylate.
Tungsten, Total
7440-33-7
C-05
MCEF, 37mm, 0.8um,
3PC
960 Max 2 10 OSHA ID213
ICP-OES
NC $81 Sample can also be tested for cobalt, otherwise sample
other metals separately.
Turpentine
8006-64-2
T-01
Charcoal, 226-01
1 - 10 0.01 - 0.2 100 NIOSH 1551 GC/FID A $77 Measures principle isomers of pinene.
Uranium
7440-61-1
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 1000 1.0 - 3.0 2 NIOSH 7300M
ICP-OES
T $40
Vanadium
7440-62-2
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 1000 1.0 - 3.0 2 NIOSH 7300M
ICP
T $40
C-05
MCEF, 37mm, 0.8um,
3PC
50 - 1000 1.0 - 3.0 0.125 NIOSH 7300M
ICP-MS
T $46
Vanadium Pentoxide
1314-62-1
C-05
MCEF, 37mm, 0.8um,
3PC
300 - 1000 1.7 - 2.0 1.43 NIOSH S388M
ICP
NC $56 Test is for vanadium that is extractable in a weak alkaline
solution, expressed as V205.
Vertrel XF (DuPont Product)
138495-42-8
$- See Decafluoropentane.
Vinyl Acetate
108-05-4
M-02
SKC POVM, 575-002
30 min - 8 hours 0.02 2.9 Proprietary,
IHGC-P029
GC/FID
A $77 If samples will not be shipped within 24 hours after
sampling, store samples in a chemical freezer (<0 C) until
shipment. Ship samples refrigerated by overnight delivery.
T-81
Anasorb 747, 226-81
TWA 10
STEL 3 STEL
TWA 0.03-0.2
STEL 0.2
1.6 Proprietary,
IHGC-P029
GC/FID
A $77 If samples will not be shipped within 24 hours after
sampling, store samples in a chemical freezer (<0 C) until
shipment. Ship samples refrigerated by overnight delivery.
O-92
Carboxen 564, ORBO 92
24 0.1 20 OSHA 51
GC/FID
E $56 Samples stable up to 18 days when stored cold.
M-3500
3M POVM, 3500
Up to 8 hours 0.0358 8 OSHA 51M
GC/FID
A $56 Store samples cold, ship cold overnight to expedite
analysis.
Vinyl Chloride
75-01-4
T-01 (2)
Charcoal, 226-01
0.7 - 5.0 0.05 2 NIOSH 1007
GC/FID
A $77 Ship samples refrigerated by overnight delivery. Synonyms:
Chloroethene, Chloroethylene
M-3520
3M POVM 3520, 2-stage
2 hours 0.0408 3 NIOSH 1007M
GC/FID
A $77 Ship samples refrigerated by overnight delivery.
O-91
Carbosieve S-III,Orbo 91
3 0.05 3 OSHA 75
GC/FID
F $77
M-N566
Assay Technology POVM
N566
Up to 8 hours 0.0116 1.0 NIOSH 1007M
GC/FID
RR $77
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com105
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
4-Vinyl-1-cyclohexene
100-40-3
T-01
Charcoal, 226-01
10 0.2 Max 1.1 OSHA 07
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0279 3 OSHA 07M
GC/FID
A $56
3-Vinyl Pyridine $- See 3-Ethenyl Pyridine.
n-Vinyl 2-Pyrrolidone (NVP)
88-12-0
T-01
Charcoal, 226-01
12 0.1 20 NIOSH 1302M
GC/FID
E $56
Vinyl Toluene
25013-15-4
T-01
Charcoal, 226-01
10 - 24 0.01 - 0.2 100 NIOSH 1501
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0251 150 NIOSH 1501M
GC/FID
A $56
Vinylidene Chloride
75-35-4
$- See 1,1-Dichloroethylene.
VM & P Naphtha
8032-32-4
$- See Naphtha, VM&P.
Volatile Organic
Compounds N/A
$- See Hydrocarbons, Total as n-Hexane.
Welding Fume Particulates
N/A
C-04
MCEF, 37mm, 0.8um, 3PC,
Matched-weight
200 - 1000 1 - 3 100 NIOSH 0500
Gravimetric
$21 Matched weight filter allows for metals analysis.
Welding Fumes Profile
Air
N/A
C-04
MCEF, 37mm, 0.8um, 3PC,
Matched-weight
200 Liters, 480 Liters needed
to allow detection of
Cadmium at OSHA action
level
1.0 - 2.0 Varies by
element
OSHA ID-125
ICP
EE $196 Profile includes Aluminum, Antimony, Beryllium, Cadmium,
Chromium, Cobalt, Copper, Iron, Lead, Manganese,
Molybdenum, Nickel, Titanium, Vanadium, Zinc & Total
Particulates.
Welding Fumes Profile
Bulk
N/A
Vial or Bag NA NA Varies by
element
OSHA ID-125
ICP
EE $226 Profile includes Aluminum, Antimony, Beryllium, Cadmium,
Chromium, Cobalt, Copper, Iron, Lead, Manganese,
Molybdenum, Nickel, Titanium, Vanadium, Zinc
Welding Fumes Profile
Wipe
N/A
K-07
Ghost Wipe Kit
100 sq cm NA Varies by
element
OSHA ID-125
ICP
EE $226 Profile includes Aluminum, Antimony, Beryllium, Cadmium,
Chromium, Cobalt, Copper, Iron, Lead, Manganese,
Molybdenum, Nickel, Titanium, Vanadium, Zinc. Use
“Ghost” wipe.
Wood Dust
N/A
C-11
PVC, Preweighed, 37mm,
5um, 2PC
100 - 500 1.5 - 2.0 50 NIOSH 0500
Gravimetric
$21 Includes total airborne particulates. No speciation possible
as to wood dust type.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com106
Analyte CAS # Recommended Media
Suggested
(minutes for passive
samplers) Volume, L
Sampling
Rate, LPM
Reporting
Limit (µg)
Method
Technique
Lab
Code
Unit Cost
USDGeneral Comment
Xylene
all isomers
1330-20-7
T-01
Charcoal, 226-01
2 - 30 0.02 - 0.2 5 NIOSH 1501
GC/FID
A $56
M-3500
3M POVM, 3500
Up to 8 hours 0.0273 7.5 NIOSH 1501M
GC/FID
A $56
T-81
Anasorb 747, 226-81
TWA 10
STEL 3
0.03-0.2 3 Proprietary
IHGC-P029
GC/FID
A $77
M-02
SKC POVM, 575-002
TWA 8 hr (Max)
STEL 15 min
0.014 6 Proprietary
IHGC-P029
GC/FID
A $77 Samples are subcontracted to outside laboratory.
m-Xylenediamine
1477-55-0
C-15
GFFs (2), H2SO4-treated,
37mm, 3PC
TWA 100
STEL 15
TWA 1.0
STEL 1.0
0.2 OSHA Method
105M
HPLC/UV
NC $116
Xylidine (Mixed Isomers)
1300-73-8 also 95-68-1
T-10
Silica Gel, 226-10
TWA 96
STEL 7.5
TWA 0.2
STEL 0.5
12 NIOSH 2002
GC/FID
NC Call for
pricing
Samples are subcontracted to outside laboratory.
2,4-Xylidine
1300-73-8
T-10
Silica Gel, 226-10
TWA 96
STEL 7.5
TWA 0.2
STEL 0.5
12 NIOSH 2002
GC/FID
NC Call for
pricing
Samples are subcontracted to outside laboratory.
2,5-Xylidine
95-78-3
T-10
Silica Gel, 226-10
TWA 96
STEL 7.5
TWA 0.2
STEL 0.5
12 NIOSH 2002
GC/FID
NC Call for
pricing
Samples are subcontracted to outside laboratory.
Zinc and Zinc Compounds
7440-66-6
C-05
MCEF, 37mm, 0.8um, 3PC
20 - 1000 1.0 - 3.0 2 NIOSH 7300
ICP
T $40 Other forms of zinc including metallic zinc and zinc salts can
interfere. Total Zinc as ZnO.
Zinc Oxide
1314-13-2
C-05
MCEF, 37mm, 0.8um, 3PC
20 - 1000 1.0 - 3.0 2.6 NIOSH 7300
ICP
T $40 Same species of zirconium may not be solubilized by this
procedure.
Zirconium
7440-67-7
C-05
MCEF, 37mm, 0.8um, 3PC
20 - 1000 1.5 2 NIOSH 7300
ICP
T $40
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com107
2.3 Profiles
Profile Analytes Media VolumeSampling
RateMethod Technique Price
Acrylate Monomer Profile Anasorb 747
Tube (226-81)
3 - 12 Liters 0.02 - 0.2
LPM
Proprietary
IH- GC-P029
GC/FID $116
SKC 575-002 PM 8 hours Max Various
3M POVM 3500 8 hours Max Various
Aldehyde Profile Acetaldehyde, Acrolein, Butyraldehyde, Formaldehyde,
Glutaraldehyde, Isovaleraldehyde
DNPH Tube,
226-119
16 - 30 Liters 0.2 - 1.0
LPM
EPA TO- 11 HPLC/UV $254
UMEX-100 Up to 8 hours - - EPA TO- 11M HPLC/UV $254
Aromatic Hydrocarbon Profile Benzene, Chlorobenzene, Cumene,
o-Dichlorobenzene, p-Dichlorobenzene, Ethyl Benzene,
alpha-Methyl Styrene, Naphthalene, para-tert-Butyl
Toluene, Styrene, Toluene, Vinyl Toluene, Xylene
Charcoal Tube,
T-01, 226-01
10 Liters 0.1 - 0.5
LPM
NIOSH 1501 GC/FID $150
3M 3500/3520,
SKC 575-001
8 hours Max Various NIOSH 1501M GC/FID $150
BTEX Profile Benzene, Ethyl Benzene, Toluene, Xylene,
Total Hydrocarbons as Hexane
Charcoal Tube,
T-01, 226-01
5 - 15 Liters 0.05 - 0.2
LPM
NIOSH 1501 GC/FID $127
3M 3500/3520,
SKC 575-001,
Assay N521
8 hours Max Various NIOSH 1501M GC/FID $127
Chlorinated Pesticide Profile Aldrin, alpha-BHC, beta-BHC, gamma-BHC (Lindane), alpha-
Chlordane, gamma-Chlordane, 4,4-DDD, 4,4- DDE, 4,4-DDT,
Dieldrin, Endosulfan I, Endosulfan II, Endosulfan Sulfate,
Endrin, Heptachlor, Heptachlor Epoxide, Methoxychlor
OVS 226-30-16 or
ORBO 49P
60 - 1000 Liters 1 LPM OSHA 67M GC/ECD $416
Diisocyanate Profile HDI, MDI, 2,4-TDI, 2,6-TDI, IPDI Coated GFF (2 PP) 15 - 240 Liters 0.2 - 1.0
LPM
OSHA
Methods
42 & 47
HPLC/FL $226
Analytics was a pioneer with the concept of IH profiles to better offer our clients an affordable approach to large scale IH testing. Our profiles include organics (29 solvents), PAHs (16 analytes),
welding fumes (15 metals plus particulates), crystalline silica (3 most common), and customized profiles to meet your specific testing requirements. Analytics can also customize a profile to
meet your specific requirements while at the same time, saving you money. Please do not hesitate to contact Analytics about setting up your customized profile.
Preferred active sampling method. For STEL sampling, collect a 15-minute sample at 1 LPM. Ozone may interfere - use ozone scrubber in known ozone contaminated areas. Any ketone or aldehyde will react
with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the aldehyde and are therefore potential negative interferences. Refrigerate before and after sampling
and ship overnight. Media contains residual acetonitrile which could interfere with acetonitrile monitoring.
Methyl Acrylate, n-Butyl Acrylate, N-Butyl Methacrylate,
Ethyl Acrylate, Methyl Methacrylate
Sample open faced. Refrigerate media before and after sampling. Ship samples cold by overnight delivery. Testing is for both 2,4- and 2,6-TDI isomers. Media is marked with expiration date,
and will ship with at least 1-month shelf life (stored cold). See comments that follow regarding field desorption of samples.
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com108
Profile Analytes Media VolumeSampling
RateMethod Technique Price
Glycol Profile Butylene Glycol, Diethylene Glycol, Propylene Glycol,
Triethylene Glycol, Ethylene Glycol
OVS tube SKC
226-57
5 – 60 Liters 0.5 – 2.0
LPM
NIOSH 5523 GC $116
Inorganic Acid Profile Hydrobromic Acid, Hydrochloric Acid, Hydrofluoric Acid,
Nitric Acid, Phosphoric Acid, Sulfuric Acid
SKC 226-10-03 100 Liters 0.3 LPM
Max
NIOSH 7903 IC $208
K-08, Whatman
Smear Tab kit
100 cm2 or 1 ft2 - - NIOSH 7903M IC $208
Non-Viable Airborne
Particulate Profile
Non-Viable Fungal Spore Count plus ID of:
Glass Fibers, Cellulosic Fibers, Insect parts, Pollen, Animal
Hair, Fly Ash, Quartz/Sand, Synthetic Fibers, Asbestos,
Calcite, Plant Fibers, Other Fibers/Particles
Zefon Sampling
Cassette
(Air-O- Cell
cassette)
150 Liters 15 LPM Call for Pricing
Organic Solvent Profile Acetone, Benzene, Butyl Acetate, Chlorobenzene,
Cyclohexanone, Decane, 1,2-Dichloroethane, 1,4-Dioxane,
Ethyl Acetate, Ethyl Benzene, Heptane, Hexane, Isooctane,
Methyl Ethyl Ketone, Methyl Isobutyl Ketone, Methylene
Chloride, m-Xylene, n-Propyl Acetate, Octane, Pentane,
Perchloroethylene, Styrene, Tetrahydrofuran, THC as
Hexane, Toluene, 1,1,1-Trichloroethane, Trichloroethylene,
1,2,4-Trimethylbenzene, o-Xylene, p-Xylene
Charcoal Tube,
T-01, 226-01
3 – 10 Liters 0.02 - 0.1
LPM
OSHA 7M GC/FID $196
3M 3500/3520,
SKC 575-001
8 hours Max
(sampler capacity
may be exceeded
for more volatile
compounds in
higher
concentration
atmospheres)
Various NIOSH 1501M GC/FID $196
Store samples cold, and ship samples cold overnight.
NIOSH now describes NIOSH Method 7903 as a “historical” method and does not recommend its use, advocating instead for a series of filter methods which provide improved sensitivity and
the opportunity for size-selective sampling of aerosols. NIOSH’s intention is not to invalidate results developed using NIOSH 7903 in the past, but to instead transition users to the newer filter
methods.
For optimum results keep samples cold and ship cold by overnight delivery (for ketone compounds).
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com109
Profile Analytes Media VolumeSampling
RateMethod Technique Price
Polynuclear Aromatic
Hydrocarbons
Acenaphthene, Acenaphthylene, Anthracene, Benzo(k)
fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene,
Benz(a)anthracene, Benzo(b)fluoranthene, Chrysene,
Dibenz(a,h)anthracene, Fluoranthene, Fluorene,
Indeno(1,2,3-cd)pyrene, Naphthalene, Phenanthrene,
Pyrene
PTFE Filter and
Orbo 43 or XAD-2
200 - 1000 Liters 2.0 LPM NIOSH 5506 HPLC/UV
& FL
$284
Selected Polynuclear
Aromatic Hydrocarbons
Anthracene, Benzo(a)pyrene, Chrysene, Phenanthrene,
Pyrene
GFF 960 Liters 2.0 LPM OSHA 58 HPLC/UV
& FL
$226
Solder Operations Profile Antimony, Beryllium, Cadmium, Copper, Lead, Silver, Tin,
Zinc Oxide
0.8µ MCEF 480 Liters,
960 if silver is
determined at TLV
1.0-2.0
LPM
OSHA ID-206 ICP $127
Toxic Metal Profile Arsenic, Beryllium, Cadmium, Chromium, Lead, Vanadium 0.8µ 37mm MCEF 400 Liters 1.0 – 3.0
LPM
NIOSH 7300M ICP $127
Welding Fume Metals Profile
– Air
Aluminum, Antimony, Beryllium, Cadmium, Chromium,
Cobalt, Copper, Iron, Lead, Manganese, Molybdenum,
Nickel, Titanium, Vanadium, Zinc and Total Particulates.
0.8µm MCEF,
C-04 (includes
gravimetric
analysis) or C-05
(no gravimetric
analysis)
200 Liters, 480
Liters needed to
allow detection of
Cadmium at OSHA
action level
1.0-2.0
LPM
OSHA ID- 125G ICP $196
Welding Fume Metals Profile
– Bulk
Aluminum, Antimony, Beryllium, Cadmium, Chromium,
Cobalt, Copper, Iron, Lead, Manganese, Molybdenum,
Nickel, Titanium, Vanadium, Zinc
Approximately 2
grams into a
plastic vial or bag
N/A N/A OSHA ID- 125G ICP $226
Welding Fume Metals Profile
– Wipe
Aluminum, Antimony, Beryllium, Cadmium, Chromium,
Cobalt, Copper, Iron, Lead, Manganese, Molybdenum,
Nickel, Titanium, Vanadium, Zinc
“Ghost” wipe. Place
into a glass or
plastic vial after
sampling.
100 cm2 or 1 ft2 N/A OSHA ID- 125G ICP $226
Transfer filters to glass vials after sampling and wrap with aluminum foil to protect from light. Ship samples by overnight delivery.
Transfer filter to glass vial immediately after sampling, and wrap the vial and tube with aluminum foil to protect from light. Ship samples cold for overnight delivery. Profile includes
Acenaphthene, Acenaphthylene, Anthracene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Benz(a)anthracene, Benzo(b)fluoranthene, Chrysene, Dibenz(a,h)anthracene,
Fluoranthene, Fluorene, Indeno(1,2,3-cd)pyrene, Naphthalene, Phenanthrene, Pyrene.
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com110
2.4 Media Table
Part Number Media DescriptionUnit of
Measure
CASSETTES
C-01 MCEF, 25mm, 0.8um, 3PC, long cowl, C-01 EACH
C-02 MCEF, 25mm, 0.45um, 3PC, long cowl, C-02 EACH
C-03 MCEF, 37mm, 0.45um, 3PC, C-03 EACH
C-04 MCEF, 37mm, 0.8um, 3PC, Matched- weight, C-04 EACH
C-05 MCEF, 37mm, 0.8um, 3PC, C-05 EACH
C-06 GFF, 37mm, 1um, 3PC, C-06 EACH
C-07 GFF, 13mm, 1um, 2PC Swinnex, C-07 EACH
C-08 PTFE, 37mm, 2um, 3PC, C-08 EACH
C-09 PTFE, Preweighed, 37mm, 2um, 2PC, Serialized, C-09 EACH
C-10 PVC, 37mm, 5um, 3PC, C-10 EACH
C-11 PVC, Preweighed, 37mm, 5um, 2PC, Serialized, C-11 EACH
C-12 PVC, Preweighed, 37mm, 5um, 3PC, Serialized, C-12 EACH
C-13 MCE/Treated Backup, 37mm, 3PC, C-13 EACH
C-14 GFF, 2PP-treated, 37mm, 3PC, C-14 EACH
C-15 GFFs (2), H2SO4-treated, 37mm, 3PC, C-15 EACH
C-16 Ag/PTFE, Cl2 / Br2 Sampler, 25mm, 3PC, C-16 EACH
C-18 MCEF/Treated Backup, 37mm, 3PC, C-18 EACH
C-19 PTFE, Preweighed, 25mm, 0.5um, C-19 EACH
C-20 GFFs(2), DNPH-treated, 37mm, 4PC, C-20 Box of 10
C-21 PTFE, 25mm, 0.45um, 2PC, C-21 EACH
C-22 GFFs (2), nitrite-treated, 37mm, 2PC, C-22 Box of 10
C-23 Air-O-Cell Cassette, C-23 EACH
C-25 MCE/Na2CO3-treated filter, 37mm, 4PC, C-25 EACH
C-26 PVC, Preweighed, 25mm, 5um, 2PC, Serialized, C-26 EACH
C-27 MCEF, 25mm, 0.8um, 3PC, C-27 EACH
C-28 GFFs (2), amine-treated, 37mm, 4PC, C-28 EACH
C-29 PTFE, 25mm, 0.5um, 3PC long cowl, PPBU, C-29 EACH
C-30 PVC, Preweighed, 5um, 47mm, (Anaslide), Serialized, C-30 EACH
C-31 IOM Cassette, plastic, SKC PN 225-71A EACH
C-32 IOM Wash&Load, PVC, 5um, 25mm EACH
C-33 IOM Wash&Load, MCE, 0.8um, 25mm EACH
In many cases for general analysis, our sample media can be provided at no additional cost. Call the lab for
pricing information.
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com111
Part Number Media DescriptionUnit of
Measure
CASSETTES
C-35 IOM Sampler & Cassette, SKC PN 225-70A EACH
C-39 PTFE, Preweighed, 2um, 37mm (Anaslide), Serialized, C-39 EACH
C-40 PEM Sampler PTFE, Preweighed, 2um(A- naslide), Serialized, C-
40
EACH
C-41 PVC, 25mm, 5um, 2PC, C-41 EACH
C-42 PVC, prewashed 37mm, 5um, 2PC, C-42 EACH
C-43 Quartz, NaOH-treated, 37mm, 2PC, C-43 EACH
C-44 GFF Type A/B, 37mm, 1um, 3PC, C-44 EACH
C-45 PTFE 13mm Swinnex, 0.5um, C-45 EACH
C-46 PTFE, 37mm, 2um + support spacer, 2PC, C-46 EACH
C-47 Quartz, heat-treated, 37mm, 3PC, SKC PN 225-401 EACH
C-48 GFF, Hg Acetate-Treated, 37mm, 2PC, SKC PN 225-9007 or
equiv.(provided by subcontract lab)
EACH
C-49 GFF (2 in series), 2PP-treated, 37mm, 4PC, C-49 EACH
C-50 MCEF Prefilter, 37mm, 0.8um, 2PC, PPBU EACH
C-51 GFF, HBr Treated, 37mm, 2PC, C-51 EACH
C-52 IOM Cassette Preweight, PVC, 5um, 25mm EACH
C-53 PVC, 37mm, 5um, Quartz support, 2PC, C-53 EACH
C-54 PVC,Preweighed,5um, 25mm, in Anaslide filter holder,
Serialized, C-54
EACH
C-55 GFF, Sulfur-treated (ST-GFF), 37mm, 2PC, C-54 EACH
C-56 GFFs(2), 37mm, 4PC, C-56 EACH
C-57 PRE-RINSED 37mm GFF EACH
C-58 IOM WASH & LOAD W/GFF EACH
C-59 PTFE,1um,25mm,2PC conductive goblet, [SKC 225-1725] EACH
C-61 PVC,5um,37mm,Preweighed,over 0.8um MCE filter,2-PC, C-61 EACH
C-62 PTFE,2um,25mm,3PC conductive go- blet,[SKC MRK-005]
MERCK-ONLY PART
EACH
C-63 PVC ACCU-CAP,Preweighed,5.0um, 37mm,2PC,Serialized, C-63 EACH
C-64 GFFs (2), veratrylamine-treated, 25mm in IOM, C-64 Each
C-65 PTFE, Pre-weighed, 47mm, 2um, PMP support ring, in Anaslide,
Serialized, C-65
Each
C-66 PTFE, 1um, 37mm, 2PC, C-66 Each
C-9018 GFF/ HgCl2-treated Polyester, 37mm, 3PC,
SKC PN 225-9018
Box of 10
C-MCE-NN MCE, Low Metals, 37mm, 0.8um, 2PC, C-MCE-NN EACH
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com112
Part Number Media DescriptionUnit of
Measure
CASSETTES
X-12 Hi-Vol GFF, 8”x10”, 1um EACH
X-13 Hi-Vol GFF, Preweighed, 8”x10”, 1um, Serialized EACH
IMPINGER SOLUTIONS
IMP-01 Impinger, 0.1N KOH MLS
IMP-02 Impinger, 1% Sodium Bisulfite MLS
IMP-03 Isocyanate Train, MAMA Impinger/Filter SET
IMP-04 Impinger, 0.02% KI in NaHCO3/Na2CO3 MLS
IMP-05 Impinger, 0.01N NaOH MLS
IMP-06 MFGB, 0.1N KOH MLS
IMP-07 MFGB, Methanol MLS
IMP-08 Impinger, 0.1N NH4F MLS
IMP-09 Impinger, NaHCO3/Na2CO3 MLS
IMP-10 Impinger, Isopropanol MLS
IMP-11 Impinger, DI Water MLS
IMP-12 MFGB, 15 mL 0.1N KOH + 5um PVC prefilter cassette + vial SET
IMP-13 Impinger, TiOSO4 reagent MLS
IMP-14 MFGB, DI Water MLS
IMP-15 MFGB, 0.01N KOH MLS
IMP-16 MFGB, Isopropanol MLS
BOTTLES/VIALS
1OZUP 1 oz Nalgene, Unpreserved EACH
15UG 15ml Clear Glass Unpreserved EACH
40UG 40ml Clear Glass Unpreserved EACH
V-02 2 mL glass vial, teflon-lined cap, Unpreserved EACH
V-04 4 mL glass vial, teflon-lined cap, Unpreserved EACH
V-15 15 mL glass vial, teflon-lined cap, Unpreserved EACH
V-40 40 mL glass vial, teflon-lined cap, Unpreserved EACH
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com113
SAMPLING KITS, AIR &
WIPES & BAGS
– IH
K-01 Dialysis water sampling kit
K-02 Swinnex GFF+ 226-39 SET
K-03 LAL water sampling kit EACH
K-04 Low SO4 Charcoal, Orbo 34 (LG) SET
K-05 KOH-treated Anasorb 747, 226-80 + PTFE Pre-filter EACH
K-06 PTFE + ORBO 43 EACH
K-07 Ghost Wipe Kit EACH
K-08 Whatman SmearTab Kit EACH
K-09 Impinger, 0.1N KOH EACH
K-10 Swinnex GFF + 226-10 EACH
K-11 Swinnex PTFE + 226-30-04 EACH
K-12 Methanol-moistened cotton-fabric swab EACH
K-13 C-15 (H2SO4 Treated GFF) plus 2 vials with 2 ml DI water for
field transfer.
EACH
K-19 Texwipe 714A swabs(2)+16mL plastic screw-cap tube EACH
K-20 OSHA Isocyanate Kit, Field Desorption Each
X-01 Paper filter, 7cm EACH
X-10 1L Tedlar Bag EACH
X-11 Ghost Wipe Only EACH
X-19 1L Foil bag EACH
X-20 5L Tedlar Bag EACH
X-PCB Paper filter, 7cm, hexane-wetted EACH
DIFFUSIVE SAMPLERS –
BADGES
M-01 SKC POVM, 575-001 EACH
M-02 SKC POVM, 575-002 EACH
M-03 SKC Mercury PM, SKC PN 520-02A EACH
M-03-A SKC Mercury PM Holder for 520-02A EACH
M-04 SKC Formaldehyde PEL PM, 526-200 EACH
M-05 SKC Formaldehyde STEL PM, 526-201 EACH
M-06 SKC Ethylene Oxide PM, 575-005 EACH
M-3500 3M POVM 3500 EACH
M-3500-C 3M POVM 3500, Case of 50 CASE of 50
M-3520 3M POVM 3520, 2-stage EACH
M-3520-C 3M POVM 3520, 2-stage, Case of 50 CASE of 50
M-3721 3M Formaldehyde PM 3721 EACH
M-3721-C 3M Formaldehyde PM 3721, Case of 5 CASE of 5
M-N521 Assay N521 TraceAir POVM EACH
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com114
DIFFUSIVE SAMPLERS –
BADGES
M-ATN571 Assay Aldehyde PM ATN571 EACH
M-N584 Assay Ammonia PM ATN584 EACH
M-N586 Assay Ozone PM N586, Case CASE of 10
UMEX-100 SKC UMEX Aldehyde PM 500-100 EACH
UMEX-200 SKC UMEX SO2&NO2 PM 500-200 EACH
UMEX-400 SKC UMEX Amine PM 500-400 EACH
TUBES – IH
O-23 Supelpak 20N, ORBO 23 EACH
O-24 Supelpak 20N, ORBO 24 EACH
O-34 Low Sulfate charcoal, ORBO 34 EACH
O-43 Supelpak 20U, ORBO 43 EACH
O-44 Supelpak 20E, ORBO 44 EACH
O-49 Supelpak 20P, ORBO 49P EACH
O-53 Specially-cleaned silica gel, ORBO 53 EACH
O-90 Carbonxen 564, ORBO 90 EACH
O-91 Carbosieve S-III,Orbo 91 EACH
O-92 Carbonxen 564, ORBO 92 EACH
O-304 Low-Nickel charcoal, ORBO 304 EACH
O-306 Petroleum Charcoal, ORBO 306 EACH
O-202580 Specially Cleaned XAD-2, O-202580 EACH
T-00-IAQ Thermal Desorption Tube, Multi-bed EACH
T-01 Charcoal, 226-01 EACH
T-09 Charcoal, 226-09 EACH
T-10 Silica Gel, 226-10 EACH
T-10-03 Prewashed Silica Gel, 226-10-03 EACH
T-10-04 Silica Gel, 226-10-04 EACH
T-10-06 H2SO4-Treated Silica Gel, 226-10-06 EACH
T-15 Silica Gel, 226-15 EACH
T-16 Charcoal, 226-16 EACH
T-17-1A Anasorb C300, 226-17-1A EACH
T-28 Soda Lime, 226-28 EACH
T-29 Anasorb 747, 226-29 EACH
T-30 XAD-2 Tube, 226-30 EACH
T-30-04 XAD-2, 226-30-04 EACH
T-30-06 XAD-2, 226-30-06 EACH
T-30-07 XAD-2, 226-30-07 EACH
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com115
Part Number Media DescriptionUnit of
Measure
TUBES – IH
T-30-08 Anasorb 708, 226-30-08 EACH
T-30-16 GFF/XAD-2 OVS, 226-30-16 EACH
T-30-18 NITC-Treated XAD-2, 226-30-18 EACH
T-35-01 Tenax, 226-35-01 EACH
T-35-03 Tenax, 226-35-03 EACH
T-39 Florisil, 226-39 EACH
T-40 TEA-treated Molecular Seive(2 tubes), with Oxidizer tube, 226-
40
EACH
T-40-02 TEA-treated Molecular Seive, 226-40-02 EACH
T-42-02 H2SO4-treated Firebrick, 226-42-02 EACH
T-44 Drying Tube, 226-44 EACH
T-47-01 Silica Gel, 226-47-01 EACH
T-49-108 Chromosorb 108, 226-49-108 EACH
T-54 HMP-treated XAD-2, 226-54 EACH
T-56 GFF/Tenax OVS, 226-56 EACH
T-57 GFF/XAD-7 OVS, 226-57 EACH
T-58 GFF/XAD-2 OVS, 226-58 EACH
T-59-04 Porapak R, 226-59-04 EACH
T-67 KOH-treated Charcoal, 226-67 EACH
T-73 TBC-Treated charcoal, 226-73 EACH
T-80 KOH-treated Anasorb 747, 226-80 EACH
T-81 Anasorb 747, 226-81A EACH
T-82 Anasorb 747, 226-82, (2 in series) EACH
T-83 Anasorb 747, 226-83 EACH
T-89 TCP-treated XAD-4, 226-89 EACH
T-93 XAD-4, 226-93 EACH
T-94 XAD-7, 226-94 EACH
T-95 XAD-7, 226-95 EACH
T-96 NBD-chloride-treated XAD-7, 226-96 EACH
T-97 XAD-7 (3 Tubes, PCP Sampler), 226-97 EACH
T-98 H3PO4-treated XAD-7, 226-98 EACH
T-99 GFF/Silica Gel OVS, 226-99 EACH
T-107 Chromosorb 102, 226-107 EACH
T-110 Chromosorb 106, 226-110 EACH
T-111 Chromosorb 106, 226-111 SET
T-114 Porapak-P, 226-114 EACH
T-115 Porapak-Q, 226-115 EACH
T-116 Porapak-T, 226-116 EACH
T-117 HMP XAD-2, 226-117 EACH
T-119 DNPH-Treated Silica Gel, 226-119 EACH
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com116
Part Number Media DescriptionUnit of
Measure
TUBES – IH
T-120 DNPH-Treated Silica Gel, 226-120, with ozone scrubber EACH
T-121 Anasorb CMS, 226-121 EACH
T-142 KOH-treated carbon beads, OVS-type with PTFE
pre-filter, 226-142
EACH
T-151 Oxidizer-Treated Charcoal, 226-151 EACH
T-153 Amine-treated XAD-2, 226-153 EACH
T-177 Silvered Silica Gel, 226-177 EACH
T-178 HBR-treated Anasorb 747, 226-178 PAIR
T-183 Silica Gel+GFF,washed/baked,226-183, 2 in series EACH
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com117
V01 06.2017 Toll Free: 800-888-8061Find more info at www.analyticscorp.com
V02-25-13 Page 1 800-888-8061
III. Pharmaceutical Testing ServicesAnalytics works with pharmaceutical companies to first develop and then routinely monitor personal exposure and equipment clearance testing. These proprietary methods are developed by Analytics using similar OSHA/NIOSH methods and then adapting these existing methods to the unique nature of the active ingredients required for your company. The entire process is made simple by Analytics’ R&D Staff and only requires minimum input by your company to establish the Occupational Exposure Limit (OEL) and to provide a small portion of the active ingredient required for analysis. The protocol we develop can be used to analyze air exposure samples, as well as samples for wipe clearance and bulk material testing. Analytics also provides containment testing of your entire production process based on the analysis of surrogates such as lactose, naproxen, acetaminophen, and mannitol. Analytics currently has over 200 proprietary and over-the-counter active pharmaceutical ingredients (API) that we analyze routinely.
Compound Media ng/ Sample
Method
5-Fluorouracil J 10 HPLC-UV Acetaminophen E, J 1000 HPLC-UV Acetylsalicylic acid E, J 2000 HPLC-UV Aciclovir E, J 9000 HPLC-UV Acitretin J 50 HPLC-UV Actinomycin D Wipe 100 HPLC-UV Amitriptylene E, J, A 100 HPLC-UV Amoxicillin E, J 100 HPLC-UV Amphotericin B J 400 HPLC-UV Anagrelide Hydrochloride N 70 HPLC-UV Atracurium besylate E, J 600 HPLC-UV Atropine Sulfate H 125 HPLC-UV Azothioprine I/Wipe 100/1000 HPLC-UV Bendamustine H/Wipe 100/1000 HPLC-UV Benzoate A 10 HPLC-UV Bromocriptine mesylate E 500 HPLC-UV Bupropion HCl E, J 400 HPLC-UV Butalbital E 2000 HPLC-UV Butoconazole Nitrate A 500 HPLC-UV Capsaicin J 20 HPLC-UV Capecitabine E, J 100 HPLC-UV Cefaclor Wipe 200 HPLC-UV Cefamandole Nafate Wipe 100 HPLC-UV Cefazolin Sodium Wipe 100 HPLC-UV Ceftazidime Wipe 100 HPLC-UV Ceftriaxone sodium N/A N/A HPLC-UV Cefuroxime Axetil Wipe 100 HPLC-UV Cefuroxime Sodium Wipe 200 HPLC-UV Cephalexin Wipe 100 HPLC-UV Cephalothin Wipe 300 HPLC-UV Chlordiazepoxide E, J 40 HPLC-UV Chlormadinone Acetate A 50 HPLC-UV Chlorohydrine A 1000 HPLC-UV Clenbuterol E, J 20 HPLC-UV Clidinium bromide E, J 2000 HPLC-UV Clobetasol propionate E, J 100 HPLC-UV Clonazepam E, J 200 HPLC-UV Clozapine base E 780 HPLC-UV Cyclophosphamide E, J, A 8000 HPLC-UV Cyclosporin A E 500 HPLC-UV
Compound Media ng/ Sample
Method
Darifenacin F 125 HPLC-UV Desogestrel E 20 HPLC-UV Diatrizoic Acid E 156 HPLC-UV Digoxin N/Wipe 150 HPLC-UV Dihydrocapsaicin J 20 HPLC-UV Doxifl Uridine J 25 HPLC-UV Doxycline Hyclate F 500 HPLC-UV Ethinyl Estradiol E/Wipe 10/60 HPLC-FL Etretinate K 50 HPLC-UV Floxuridine J 50 HPLC-UV Flucytosine J 40 HPLC-UV Fludrocortisone Acetate H 10 HPLC-UV Flumethasone A 10 HPLC-UV Fluocinolone Acetonide A 20 HPLC-UV Fluocinonide A 20 HPLC-UV Fluorescein L 625 OD Fluorouracil (5-) E, J 100 HPLC-UV Flurazepam E, J 200 HPLC-UV Fluticasone Propionate E, J 2000 HPLC-UV Ganciclovir Sodium A 100 HPLC-UV Hydrazoic Acid M 50 (300) HPLC-UV Hydrocodone J 200 HPLC-UV Hydrocodone Bitartrate J 200 HPLC-UV Insulin F 2000 HPLC-UV Isotretinoin J 100 HPLC-UV Ketorolac Tromethamine A 100 HPLC-UV Labetalol E, J 1000 HPLC-UV Lactose A/ Wipe 2 IC Laidlomycin A 400 HPLC-UV Laidlomycin Propionate A 400 HPLC-UV Lamivudine E, J 1000 HPLC-UV Lansoprazole E 30 HPLC-UV Lasalocid E, J 800 HPLC-UV Levonorgestrel E 10 HPLC-UV Mannitol A/Wipe 1 IC Mestranol E, J 80 HPLC-UV Methamphetamine E, J 200 HPLC-UV Methylphenidate E, J 200 HPLC-UV Methylphenidate (dex-) E, J 200 HPLC-UV Mivacurium HCl E, J 800 HPLC-UV
118
V01 06.2017 Toll Free: 800-888-8061 Find more info at www.analyticscorp.com
V02-25-13 Page 2 800-888-8061
Compound Media ng/ Sample
Method
Morphine Sulfate E, J 100 HPLC-UV Mycophenolate Mofetil A 200 HPLC-UV Nadolol E, J 10 HPLC-UV Naproxen A 2 HPLC-FL Naproxen Sodium A/Wipe 2 HPLC-FL Nicardipine Hydrochloride A 1000 HPLC-UV Norethindrone A 10 HPLC-UV Norethindrone Acetate E/Wipe 30 HPLC-UV Norgestimate E 10 HPLC-UV Orlistat B 1000 HPLC-UV Oseltamivir E, J 100 HPLC-UV Oxfendazole A 1000 HPLC-UV Oxytetracycline F 2500 HPLC-UV Pergolide Mesylate E 8.5 HPLC-FL Pilocarpine HCl E 600 HPLC-UV Prasterone (DHEA, dehydroepiandrosterone)
E 100 HPLC-UV
Procainamide HCl E, J 100 HPLC-UV Procarbazine Hydrochloride
J 100 HPLC-UV
Progesterone A 10 HPLC-UV Pyridostigmine Bromide E, J 200 HPLC-UV Ramoxifen Citrate G 200 HPLC-UV Ranitidine HCl J 400 HPLC-UV Ranolazine Free Base A 500 HPLC-UV Ranolazine Hydrochloride A 500 HPLC-UV Retinol O 100 HPLC-UV Ribavirin H 30 HPLC-UV Rifaximin E 17,000 HPLC-UV Salinomycin Sodium J 500 HPLC-UV Sertindole E 200 HPLC-UV Sumatriptan Succinate E, J 1000 HPLC-UV Temazepam E 500 HPLC-UV Testosterone Propionate A 10 HPLC-UV Tezacytabine (FMdC) J 20 HPLC-UV Thalidomide C 30 HPLC-UV Ticlopidine Hydrochloride A 200 HPLC-UV Tobramycin E 2000 HPLC-UV Tolcapone B 5000 HPLC-UV Trenbolone Acetate A 5 HPLC-UV Tretinoin, Vesanoid J 50 HPLC-UV Triamcinolone K 50 HPLC-UV Valaciclovir J 3000 HPLC-UV Verapamil J 200 HPLC-UV Vitamin D3 D 120 HPLC-UV Warfarin E 50 HPLC-UV Zalcitabine A 100 HPLC-UV Zidovudine E, J 3000 HPLC-UV Zopiclone E 38 HPLC-UV
Media Codes:
A - 37 mm glass filter type A/E (1μm) and pad in polystyrene cassette B - 37 mm quartz filter (1μm) and pad in polystyrene cassette C - Two 37 mm quartz filters (1μm) in polystyrene cassette D - 37 mm Teflon filter (1μm) and pad in polycarbonate cassette E - 37 mm Teflon filter (1μm) and pad in polypropylene cassette F - 37 mm Teflon filter (1μm) and pad in 3-piece polypropylene cassette G - 37 mm Teflon filter (1μm) and glass fi lter type A/E as support pad in polypropylene cassette H - 25 mm Teflon filter (1μm) and pad in polypropylene cassette I - 37 mm Teflon filter (0.45μm) and pad in polypropylene cassette J - 37 mm Teflon filter (1μm) and pad in polystyrene cassette K - 37 mm Teflon filter (0.5μm) and pad in polystyrene cassette L - Two 37 mm quartz filters (1μm) in polypropylene cassette N - Two 37 mm glass filter type A/E (1μm) in polystyrene cassette O - 25 mm impregnated Teflon filter (1μm) in IOM cassette
119
IV. Environmental Services and Fees
1. IntroductionWith more than twenty years of laboratory experience, Analytics continues its tradition of excellence in analytical services. By combining scientific expertise, state of the art instrumentation and leading edge information management systems, Analytics is committed to delivering to our clients the highest quality analytical laboratory service and data. From sample receipt to results delivery, remaining responsive to client needs is the center of our focus.
2. Standard Turnaround TimeAnalytics standard turnaround time for most environmental analyses is 5 business days from sample receipt in the laboratory. Emailed, faxed or verbal results are available by the close of business on the due date. A hard copy of the report will follow by mail.
3. Billing and Rush MultipliersClients may request monthly billing or individual invoices by sample group. Billing by sample group is assumed unless otherwise requested. Billing terms are payable upon receipt. Acceptable forms of payment include check, money order, wire transfer, VisaTM, MasterCardTM, DiscoverTM or American ExpressTM.
Samples requiring rush turnaround time must be scheduled prior to sample submission. The following charges will apply:
3 Day Turnaround Time 1.5 x price 2 Day Turnaround Time 1.75 x price 1 Day Turnaround Time 2.00 x price Same Day Turnaround Time 3.00 x price Weekend Analysis 3.00 x price + $300 Holiday Analysis 3.00 x price + $300
4. Deliverable MultipliersUnit prices are for a Level 1 data package. Analytics can provide Level 2, 3, CLP-like, and custom formats (see Section 9 for details of data package deliverable). The following charges apply to the data package requested:
Level 2 10% Level 3 15% CLP-Like 20% Custom Package Call for Pricing
5. CertificationsAnalytics seeks specific certifications as our business strategies require that we gain them. Our laboratory is certified by some of the most prestigious environmental oversight agencies including the National Environmental Laboratory Accreditation Conference (NELAC). We are currently approved as an environmental laboratory in conformance with the NELAC standards through the Commonwealth of Virginia for the following categories: Potable Water, Non-Potable Water and Solid and Hazardous Waste. Certification under the NELAC program provides for reciprocity to all NELAC authorized states, which includes FL, IL, KS, LA, MN, NH, NY, OR, PA, TX, and UT. A complete listing of our state and federal certifications can be found on our website at www.analyticscorp.com
120
6. Sample Containers/Shipping KitsWe will provide and ship the appropriate sample supplies/containers by non-priority status to clients within the continental United States at no charge with one exception: Nitric acid preserved containers are classified as a hazardous shipment and appropriate charges will be applied. Clients requesting overnight delivery of supplies and those outside the continental U.S. will be invoiced for the associated charges when applicable. Due to the changes in shipping regulations, Nitric acid preserved sampling containers cannot be shipped overnight. It is the client’s responsibility to ensure proper sampling, packing, and return shipping to the laboratory under proper storage/preservation conditions.
7. Sample Kit/Cooler Return PolicyWe will provide and ship (by non-priority status) the appropriate sample containers in a sample kit or cooler. We request that the kits/coolers be returned to us within 30 days. Please notify your Client Services Representative if you cannot meet this deadline. Clients will be billed for any unreturned kits/coolers, inserts, packing material, and bottles. The value of the kits and coolers ranges between $50 and $250.
8. Sample Kit/Cooler TemperaturesWhen samples arrive at the laboratory, the temperature of each shipping container is measured and recorded. Samples should be packed such that they maintain a temperature range of 2-6°C during shipment. To ensure shipment at the proper temperature, we recommend using bags of ice rather than ice packs or artificial coolants. Guidance addressing temperature varies by state, regulatory program, and client-specific quality assurance plans.
9. Sample Collection and Preservation GuidelinesPreservatives must be added in the field at the time of sample collection unless sample containers are pre-preserved. Preservatives should be recorded on the Chain-of-Custody (COC) form in the "Preservative" column on a per sample basis. For certain methods and parameters, the laboratory verifies upon receipt that the sample pH falls within an acceptable range. Improperly preserved samples or samples with pH values outside of the specified range are noted in the sample container receipt form. The client is contacted and given the option of re-sampling, directing the laboratory to preserve the sample in-house, or processing the sample as it was received, and recorded on the COC.
When obtaining aqueous samples for the determination of volatile organics, the collector should ensure the absence of headspace by filling the 40-ml bottle to the top. This procedure should produce a positive meniscus across the surface of the vial. The Teflon-lined septum should be placed gently over the sample surface, with the Teflon side down, and the top screwed firmly on over the septum. A proper seal should be verified by inverting the sealed bottle and gently tapping on the sides with your finger, ensuring that no air bubbles appear.
If applicable, the collector should designate which samples are to be used for Quality
121
Control. For these designated samples, the recommended sample weight or volume should be doubled. If sufficient sample is not available to the laboratory, QC requirements may not be achievable. Excess sample will unnecessarily increase shipping costs.
Sampling and Shipping Guidelines:
Bottles: • Do not open any bottles until you actually put your sample in them - this
prevents contamination.• Do not substitute your own bottles or interchange any lids or labels on our
bottles.• Securely repack all bottles provided. Otherwise, bottle breakage may occur.• Do not rinse bottles prior to sample collection. Rinsing will contaminate them
and remove preservative. Some states may require that non-preservedcontainers be rinsed with sample water before collection.
Ice/Blue Ice: • A wet ice slurry is ideal for sample collection and the use of blue ice is
discouraged and not allowed by some state certifying bodies. • If you must use blue ice, freeze in a standard freezer for at least 12 hours and no
more than 18 hours prior to sampling. Do not freeze the blue ice using dry ice. This freezes your sample and breaks bottles.
• Do not freeze the sample itself.• Please repack the blue ice with red caps upward. Otherwise, your sample results
may not be accurate or bottle breakage may occur during shipment.
Sample Records: • Two types of labels will be supplied: a return shipping label and a sufficient
number of sample identification labels. On the sample identification labels, please complete all sections of the label to eliminate the possibility of samples being mixed up. A Chain-of-Custody record and packing list are also provided.
• Provide as much identifying information about your company on the COC,including your account number, as possible. Analytics processes thousands ofsamples a year—often from several plants of the same company, and very oftenon the same day!
10. How to Submit a Sample
1. Complete all the pertinent information on the chain of custody (COC) about yourcompany and the project. Please include the state where the samples werecollected. A COC can be found on our website at www.analyticscorp.com/forms.
a. Sample Identification: A unique sample description that will appear on thereport. Date and time collected should always be recorded.
b. Grab or Composite: Indicate whether the sample is a grab (taken at one timefrom a single location) or a composite (taking multiple samples andcombining them into one).
c. Matrix: Mark the type of sample and number of containers. If applicable,indicate whether the water is a groundwater, waste water, or drinking water.
d. Analyses Requested: Write the analysis name or abbreviation. Clearlyindicate the analyses needed on every sample.
e. Preservative: Please indicate what preservative was used, if any.f. Turnaround Time: Indicate whether the samples are to be analyzed on a
normal (5 working days) or rush basis. To assist the lab in scheduling, you can
122
also include the date you need results. All rush work should be prescheduled. Also indicate if you would like preliminary results phoned, emailed or faxed to you, and include the number or email address.
g. Data Package Options: When a detailed data packaged is required, indicatethe type of data package and if site QC is being submitted.
h. Relinquished by/Received by: Each time there is a change in the samplescustody, this section must be signed by the person relinquishing and the person receiving the samples. Chain-of-custody seals for the sample containers and the outside of the package are available upon request.
2. Each sample bottle must be clearly labeled and cross-referenced on your chain ofcustody.
3. Samples which may present health hazards, such as those containing high levels oftoxic materials, MUST be clearly marked.
4. If accurate and detailed information is not available, it will delay sample processingand possibly inhibit meeting your reporting date.
11. Reports and DeliverablesAnalytical reports convey to the client all of the information that is needed to evaluate the analytical results and draw conclusions about the levels those samples represent. Unless a specific format is requested, the standard laboratory procedure is to report Level 1 results to the limit of quantitation (LOQ). In many instances, it is possible to estimate to a value below the LOQ, if lower values are needed. These estimates are made to the method detection limit (MDL). Values reported below the LOQ are flagged with a “J” to indicate that the value is estimated.
A typical Level 1 analytical report will include the following:
1. Laboratory name, address, telephone number, and certification/ID number2. Client name and/or site name3. Date and time of sample collection or pickup4. Date and time of sample receipt, extraction, and analysis5. Laboratory sample ID number6. Customer sample ID number7. Method reference (EPA, Standard Methods, etc.)8. Sample type9. Requested analytes10. Analytical results with units of measurement11. Reporting limits12. Data qualifier code(s) if needed13. Remarks about sample irregularities or problem in analysis14. Initials of laboratory analyst, signature of lab director or designee
123
Detailed data packages are also available, upon request, which document QA/QC in addition to the sample analyses for each batch of samples. For data package purposes, a batch is defined as the samples listed on a COC and is generally less than 20 field samples. If you request site-specific QA/QC samples, one sample in each batch must be submitted in triplicate in order to meet volume requirements. An additional charge for these samples will be incurred if less than 10 samples are submitted. If your data package does not require site-specific QC, you will not be charged for laboratory batch QC samples. The turnaround time for extended data packages is contingent upon the level of the data package.
Analytics can provide our clients any report format since all laboratory data is stored and generated from a common database. In order to meet both regulatory agency and client requirements, we are constantly updating our data package formats. If you need additional modifications to the report formats listed below, please contact our customer service department or your project manager. A description of our most commonly requested reports are as follows:
Organics Data Packages
Data Requirements 1 2 3 4 EPA-CLP Equivalent Forms Case Narrative X X NA Cross Reference Sample ID/Client ID X X Cover Page Sample Result Summary X X X X 1A, 1B,C, 1D Surrogate Recovery X X X 2A, 2B, 2C, 2D, 2E, 2F Matrix Spike/Matrix Spike Duplicate Recovery X X X 3A, 3B, 3C, 3D, 3E Laboratory Control Sample X X X NA Method Blank Summary X X 4A, 4B, 4C Method Blank Results X X 1A, 1B,C, 1D Instrument Performance Check (Tune Report) X X 5A, 5B Initial Calibration Data X X 6A, 6B, 6C, 6D, 6E, 6F, 6G Continuing Calibration Check X X 7A, 7B, 7C, 7D, 7E Internal Standard Area and RT Summary X X 8A, 8B, 8C, 8D Raw Data X NA External Chain-of-Custody X X X X NA Internal Custody Tracking Documentation X NA
Inorganics Data Packages
Data Requirements 1 2 3 4 EPA-CLP Equivalent Forms Case Narrative X X NA Cross Reference Sample ID/Client ID X X Cover Page Sample Result Summary X X X X 1 Initial Calibration X X 2A Continuing Calibration Verification X X 2A Method Blank Results X X 3 ICP Interference Check Sample X X 4 Matrix Spike Sample Recovery X X X 5A, 5B Duplicates X X X 6 Laboratory Control Sample X X X 7 Raw Data X NA External Chain-of-Custody X X X X NA Internal Custody Tracking Documentation X X NA
X = Offered as part of QC Package * = Only offered if requested
124
12. Alphabetical Listing of Methods
Analytics is pleased to offer an extensive array of environmental analyses, including most EPA, RCRA, UST, TCLP, drinking water and wastewater methods. Specific analytical tests are listed in the following sections. Lists of tests are presented by an alphabetical list by analyte. Please note that for most tests Analytics does not require a minimum sample fee. Volume discounts are available depending on the scope of your project. Please contact our sales department or your project manager for details.
Each COC submitted is considered a Work Order (WO), therefore a separate report package is prepared for each COC submitted unless otherwise requested.
125
Alphabetical Listing
of
Environmental Tests
V01 06.2017 Toll Free: 800-888-8061 Find more info at www.analyticscorp.com 126
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Acidity SM2310BDrinking Water /
Water
250 mL Plastic,
No HeadspaceCool < 6 ºC 14 days 5.00 $29
Alcohol Profile EPA 8015 Water 40 mL Vial Cool < 6 ºC 7 days 10.0 $104 Ethanol, Methanol, Isopropanol
Alcohol Profile EPA 8015Solid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC 14 days 10.0 mg/kg $104 Ethanol, Methanol, Isopropanol
Alkalinity, Total SM2320BDrinking Water /
Water
250 mL Plastic,
No HeadspaceCool < 6 ºC 14 days 5.00 $29
Alkalinity - Bicarbonate SM2320BDrinking Water /
Water
250 mL Plastic,
No HeadspaceCool < 6 ºC 14 days 5.00 $29
Alkalinity - Carbonate SM2320BDrinking Water /
Water
250 mL Plastic,
No HeadspaceCool < 6 ºC 14 days 5.00 $29
Alkalinity - Hydroxide SM2320BDrinking Water /
Water
250 mL Plastic,
No HeadspaceCool < 6 ºC 14 days 5.00 $29
Aggressive Water Index Calculation Drinking Water250 mL Plastic,
No Headspace/ 500mL
250 mL plastic
unpreserved /
500mL plastic
HNO3 preserved
14 days N/A $29Calculation based on Field pH, Alkalinity
and Calcium Hardness
Ammonia-N SM4500NH3G Water 500 mL PlasticCool < 6 ºC;
H2SO428 days 0.10 $35
Anion Profile - inclusive
(Br, Cl, F, NO2, NO3, PO4, SO4)EPA 300.0
Drinking Water /
Water125 mL Plastic Cool < 6 ºC
28 days -
48 hours for
NO2, NO3,
o-Phos
0.1 - 1.0 $127
Anion Profile - inclusive
(Br, Cl, F, NO2, NO3, PO4, SO4)EPA 300.0 Mod.
Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC
28 days -
48 hours for
NO2, NO3,
o-Phos
1.0-10.0 ug/g $127
BOD (Biochemical Oxygen
Demand)SM5210B Water 1 L Plastic Cool < 6 ºC 48 hours 2 $29
Bromide EPA 300.0Drinking Water /
Water125 mL Plastic Cool < 6 ºC 28 days 0.50 $41
Bromide EPA 300.0 Mod.Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 28 days 5.0 ug/g $41
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
BTEX EPA 8021 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
1-5 ug/L $64
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com127
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
BTEX EPA 8021Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.0 mg/Kg $64
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
BTEX + MTBE EPA 8021 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
1-5 ug/L $69
BTEX + MTBE EPA 8021Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.0 mg/Kg $69
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
BTEX + MTBE +
NaphthaleneEPA 8021 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
1-5 ug/L $69
BTEX + MTBE +
NaphthaleneEPA 8021
Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.0 mg/Kg $69
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
Benzene, Toluene,
EthylbenzeneEPA 602 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
1-5 ug/L $64 Used for Discharge (Clean Water Act)
BTEX EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC, HCl,
Ascorbic Acid14 days 2.0-5.0 ug/L $191
BTU ASTM D 240 Water 8 oz Glass Jar Cool < 6 ºC 28 days Call for limitsCall for
pricing
BTU ASTM D 240Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 28 days Call for limits
Call for
pricing
Carbon Call for Method Water
Carbon Call for MethodSolid / Soil /
Waste
Carbon Dioxide (CO) SM4500CO2Drinking Water /
Water
250 mL Glass,
No HeadspaceCool < 6 ºC Immediately 10.00 $46
Call for container, preservation, limits and pricing
Call for container, preservation, limits and pricing
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com128
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
CBOD (Carbonaceous Bio-
chemical Oxygen Demand)SM5210B Water 1L Plastic Cool < 6 ºC 48 Hours 2 $46
Chloride EPA 300.0Drinking Water /
Water125 mL Plastic Cool < 6 ºC 28 days 0.25 $41
Chloride EPA 300 Mod.Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 28 days 2.5 ug/g $41
Chlorine, Residual SM4500ClGDrinking Water /
Water
250 mL Amber Glass,
Zero HeadspaceCool < 6 ºC Immediately 0.20 $29
Chlorine, Free SM4500ClGDrinking Water /
Water
250 mL Amber Glass,
Zero HeadspaceCool < 6 ºC Immediately 0.20 $29
COD (Chemical Oxygen
Demand)EPA 410.4 Water 250 mL Plastic
Cool < 6 ºC;
H2SO428 days 20.0 $29
Coliform - E. Coli,
Presence/Absence
SM9223B
(Colisure)Drinking Water Sterile Container
Cool < 10 ºC;
Sodium
Thiosulfate
30 Hours Present / Absent $58
E. Coli, MPNSM9223
ColisureDrinking Water Sterile Container
Cool < 10 ºC;
Sodium
Thiosulfate
30 Hours < 1 MPN/100 mL $58
E. Coli, MPNSM9223
ColisureWastewater Sterile Container
Cool < 10 ºC;
Sodium
Thiosulfate
8 Hours < 1 MPN/100 mL $58
Coliform - Fecal, (MPN) SM9221E Water Sterile Container
Cool < 10 ºC;
Sodium
Thiosulfate
8 Hours 2 CFU/mL MPN $58
Coliform - Total,
Presence/ Absence
SM9223
ColisureDrinking Water Sterile Container
Cool < 10 ºC;
Sodium
Thiosulfate
30 Hours Present / Absent $58
Coliform, Total (MPN)SM9223
Colilert 18Drinking Water
Cool < 10 ºC;
Sodium
Thiosulfate
30 Hours < 1 MPN/100 mL $58
Color SM2120BDrinking Water /
Water125 mL Plastic Cool < 6 ºC 24 hours 5 CU $18
Conductivity SM2510B Drinking Water 125 mL Plastic Cool < 6 ºC 28 days N/A $18
Conductivity EPA 120.1 Water 125 mL Plastic Cool < 6 ºC 28 days N/A $18
Corrosivity (pH meter) SM4500H+B Water 125 mL Plastic Cool < 6 ºC Immediately N/A $18
Corrosivity (pH meter) EPA 9045CSolid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC Immediately N/A $18
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com129
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Cyanide, Amenable SM4500CNGDrinking Water /
Water500 mL Plastic
Cool < 6 ºC
NaOH14 days 0.02 $46
Cyanide, Total SM4500CN C&EDrinking Water /
Water500 mL Plastic
Cool < 6 ºC
NaOH14 days 0.02 $46
Cyanide, Total EPA 9010C/9014Solid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC 14 days 1.00 mg/Kg $46
Density ASTM D1475 Waste / Oil / Pant 8 oz Wide Mouth Jar Cool < 6 ºC 7 days N/A $46
Dissolved Organic Carbon SM5310CDrinking Water /
Water250 mL Amber Glass
Cool < 6 ºC
H2SO428 Days 1.00 $46
Dissolved Organic Carbon EPA 9060A ModSolid / Soil /
Waste2 oz Wide Mouth Jar Cool < 6 ºC 28 Days 10.0 mg/Kg $46
Diesel Range Organics (DRO) EPA 8015 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.50 $76
Diesel Range Organics (DRO) EPA 8015Solid / Soil /
Waste8 oz Wide Mouth Jar Cool < 6 ºC 14 days 10.0 mg/Kg $76
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
EDB/DBCP EPA 8011 Water (3) 40 mL Vials Cool < 6 ºC; HCl 14 days 0.05 ug/L $76
Endotoxin
Manufacturer
Analytics SOP
ENVWC-023-LAL
Drinking Water /
Water
Sterile / Pyrogen Free
Plastic TubeCool < 6 ºC Not Specified 0.05 EU/mL $46
Ethylene Dibromide, 1,2-Di-
bromo-3-chloropropane, 1,2,3-
Trichloropropane
EPA 504.1 Drinking Water (3) 40 mL VialsCool < 6 ºC,
Na2S2O314 days 0.05 ug/L $69
Ethylene Glycol EPA 8015 Water 40 mL Vial Cool < 6 ºC 7 days 10.0 $104
Ethylene Glycol EPA 8015Solid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC 14 days 10.0 mg/kg $104
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
Extractable Organic Halides
(EOX)EPA 9020
Solid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC 14 days Call for limits
Call for
pricing
Flashpoint, Liquids by Closed
CupASTM D93 Water
250 mL Amber Glass,
or plasticCool < 6 ºC 7 days > 75ºC $46
Flashpoint, Liquids by Closed
CupASTM D93
Solid / Soil /
Waste8 oz Wide Mouth Jar Cool < 6 ºC 7 days > 75ºC $46
Fluoride EPA 300.0Drinking Water /
Water125 mL Plastic Cool < 6 ºC 28 days 0.10 $41
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com130
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Fluoride EPA 300.0 Mod.Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 28 days 5.0 ug/g $41
Formaldehyde EPA 8315 Water 1 Liter Amber Glass Cool < 6 ºC 3 days 100 ug/L $208
Formaldehyde EPA 8315Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 14 days 0.100 mg/kg $208
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
Free Liquids EPA 9095A Water 8 oz Jar Cool < 6 ºC 7 days + / - $46
Free Liquids EPA 9095ASolid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 7 days + / - $46
Fuels - Fingerprinting EPA 8015 Mod Water (2) 1 L Amber Glass Cool < 6 ºC 7 days N/A $133Compared to in house Fuels. Reported
as a distillation range comparison.
Fuels - Fingerprinting EPA 8015 ModSolid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 14 days N/A $133
Compared to in house Fuels. Reported
as a distillation range comparison.
Gasoline Range Organics
(GRO)EPA 8015 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
500 ug/L $64
Gasoline Range Organics
(GRO)EPA 8015
Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 10.0 mg/Kg $64
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
Glycol Profile EPA 8015 Water 40 mL Vial Cool < 6 ºC 7 days 10.0 $104
Ethylene Glycol, Propylene Glycol,
Diethylene Glycol, Dipropylene Glycol,
Triethylene Glycol
Glycol Profile EPA 8015Solid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC 14 days 10.0 mg/kg $104
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture
Haloacetic Acids
(HAA)EPA 552.2 Drinking Water
Hardness, Total SM2340C Drinking Water 250 mL Plastic HNO3 180 days 10.0 $29
Hardness, Total EPA 200.7 Water 250 mL Plastic HNO3 180 days 0.05 $23
Herbicides - Chlorinated EPA 515 Drinking Water (2) 1 L Amber Glass Cool < 6 ºC 7 days Call for limitsCall for
pricing
Herbicides - Chlorinated EPA 8151A Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 2.00 $341
Call for container, preservation, limits and pricing
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com131
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Herbicides - Chlorinated EPA 8151 Soil 8 oz Glass Jar Cool < 6 ºC 14 days Call for limitsCall for
pricing
Heterotrophic Plate Count
(HPC)SM9215B Drinking Water Sterile Container
Cool < 10 ºC;
Sodium
Thiosulfate
8 Hours 1 CFU/mL $58 HPC Agar 48 hour incubation
Heterotrophic Plate Count
(HPC)SM9215B Drinking Water Sterile Container
Cool < 10 ºC ;
Sodium
Thiosulfate
8 Hours 1 CFU/mL $58 R2A Agar 7 day incubation
Hexavalent Chromium SM3500CrB Water 250 mL Plastic Cool < 6 ºC 24 hours 0.02 $58
Hexavalent Chromium SM3500CrB Water250 mL Plastic
pH 9.3-9.7
Ammonium
Sulfate Buffer28 days 0.02 $58
Hydrazine ASTM D385 Water 500 mL Plastic Cool < 6 ºC 7 days Call for limitsCall for
pricing
Hydrogen Sulfide SM4500S2H Water 500 mL Plastic Cool < 6 ºC 7 Days 2.00 $46Calculation based on pH, Conductivity
and Total Sulfide
Ignitability by Closed Cup ASTM D93 Water250 mL Amber Glass,
or plasticCool < 6 ºC 7 days > 60ºC $53
Ignitability by Closed Cup ASTM D93Solid / Soil /
Waste8 oz Wide Mouth Jar Cool < 6 ºC 7 days > 60ºC $53
LAL
(Limulus Amebocyte Lysate)
Manufacturer
Analytics SOP
ENVWC-023-LAL
Drinking Water /
Water
Sterile / Pyrogen Free
Plastic TubeCool < 6 ºC Not Specified 0.05 EU/mL $46
Langlier Saturation Index Calculation Drinking Water
250 mL Plastic,
No Headspace /
1000mL/ 500mL
250 mL plastic
unpreserved
/1000mL plastic
unpreserved
500mL plastic
HNO3 preserved
14 days N/A $29
Calculation based on Field
Temperature, Field pH, Alkalinity, TDS
and Calcium Hardness
Lead EPA 200.7 Water 500 mL Plastic HNO3 180 days 0.05 $23
Lead EPA 6010 Water 500 mL Plastic HNO3 180 days 0.05 $23
Lead EPA 6010Solid / Soil /
Waste4 oz Wide Mouth Jar None 180 days 4 ug/g $23
Lead EPA 200.8 Drinking Water 500 mL Plastic HNO3 180 days 0.0025 $29
MBAS (Surfactants) SM5540CDrinking Water/
Water1000 mL plastic Cool < 6 ºC 48 hours 0.10 $76
Mercury EPA 245.2Drinking Water/
Water500 mL plastic HNO3 28 days 0.0002 $35
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com132
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Mercury EPA 7470 Water 500 mL plastic HNO3 28 days 0.0002 $35
Mercury EPA 7471Solid / Soil /
Waste4 oz Glass Jar HNO3 28 days 0.025 mg/Kg $35
Metals - Appendix IXEPA 6010 / EPA
7470Water 500 mL Plastic HNO3
6 months / 28
days for
Mercury
0.05; Hg 0.0005 $203
Antimony, Arsenic, Barium, Beryllium,
Cadmium, Chromium, Cobalt, Copper,
Lead, Molybdenum, Nickel, Selenium,
Silver, Thallium, Tin, Vanadium, Zinc,
Mercury
Metals - Appendix IXEPA 6010 / EPA
7471
Solid / Soil /
Waste4 oz Wide Mouth Jars None
6 months /
28 days for
Mercury
4 ug/g
Hg 0.025ug/g$203
Antimony, Arsenic, Barium, Beryllium,
Cadmium, Chromium, Cobalt, Copper,
Lead, Molybdenum, Nickel, Selenium,
Silver, Thallium, Tin, Vanadium, Zinc,
Mercury
Metals - Priority Pollutant List
(PPL)
EPA 200.7 / EPA
245.2Water 500 mL Plastic HNO3
6 months /
28 days for
Mercury
0.05; Hg 0.0002 $145
Antimony, Arsenic, Beryllium,
Cadmium, Chromium, Copper, Lead,
Nickel, Selenium, Silver, Thallium, Zinc,
Mercury
3
Metals - Priority Pollutant List
(PPL)
EPA 6010 / EPA
7471
Solid / Soil /
Waste4 oz Glass Jar None
6 months /
28 days for
Mercury
4 ug/g
Hg 0.025ug/g$145
Antimony, Arsenic, Beryllium,
Cadmium, Chromium, Copper, Lead,
Nickel, Selenium, Silver, Thallium, Zinc,
Mercury
Metals - RCRA (8)EPA 6010 / EPA
7470Water 500 mL Plastic HNO3
6 months /
28 days for
Mercury
0.05; Hg 0.0005 $104Arsenic, Barium, Cadmium, Chromium,
Lead, Selenium, Silver, Mercury
Metals - RCRA (8)EPA 6010 / EPA
7471
Solid / Soil /
Waste4 oz Wide Mouth Jars None
6 months /
28 days for
Mercury
4 ug/g
Hg 0.025ug/g$104
Arsenic, Barium, Cadmium, Chromium,
Lead, Selenium, Silver, Mercury
Metals - Target Analyte List
(TAL)
EPA 6010 / EPA
7470Water 500 mL Plastic HNO3
6 months /
28 days for
Mercury
0.05; Hg 0.0005 $203
Aluminum, Antimony, Arsenic, Barium,
Beryllium, Cadmium, Calcium,
Chromium, Cobalt, Copper, Iron, Lead,
Magnesium, Manganese, Molybdenum,
Nickel, Potassium, Selenium, Silver,
Thallium, Vanadium, Zinc, Mercury
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com133
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Metals - Target Analyte List
(TAL)
EPA 6010 / EPA
7471
Solid / Soil /
Waste4 oz Glass Jar None
6 months /
28 days for
Mercury
4 ug/g
Hg 0.025ug/g$203
Aluminum, Antimony, Arsenic, Barium,
Beryllium, Cadmium, Calcium,
Chromium, Cobalt, Copper, Iron, Lead,
Magnesium, Manganese, Molybdenum,
Nickel, Potassium, Selenium, Silver,
Thallium, Vanadium, Zinc, Mercury
Metals by ICP EPA 200.7Drinking Water /
Water500 mL Plastic HNO3 6 months 0.05 - 0.25 $23 Individual Elements
Metals by ICP EPA 6010 Water 500 mL Plastic HNO3 6 months 0.05 - 0.25 $23 Individual Elements
Metals by ICP EPA 6010Solid / Soil /
Waste4 oz Glass Jar None 6 months 4 ug/g $23 Individual Elements
Metals by ICP/MS EPA 200.8Drinking Water /
Water500 mL Plastic HNO3 6 months 0.0025 - 0.010 $29 Individual Elements
Nitrate, as Nitrogen (NO3) EPA 300.0Drinking Water /
Water125 mL Plastic Cool < 6 ºC 48 hours 0.11 $46
Nitrate-Nitrite, as Nitrogen SM4500NO3FDrinking Water /
Water250 mL Plastic
Cool < 6 ºC
H2SO428 days 0.05 $46
Nitrite, as Nitrogen EPA 300.0Drinking Water /
Water125 mL Plastic Cool < 6 ºC 48 hours 0.16 $41
Nitrite, as Nitrogen SM4500NO2BDrinking Water /
Water250 mL Plastic Cool < 6 ºC 48 hours 0.02 $46
Nitrogen, TotalEPA351.2 /
SM4500NO3FWater 250 mL Plastic
Cool < 6 ºC;
H2SO428 days 0.25 $104
Sum of the Total Kjeldahl Nitrogen and
Nitrate-Nitrite Analysis.
Oil and Grease -Total EPA 1664 Water (2) 1 L Amber GlassCool < 6 ºC; HCL
or H2SO428 days 5.00 $81 Hexane extractable materials (HEM)
Oil and Grease -TPH EPA 1664 Water (2) 1 L Amber GlassCool < 6 ºC; HCL
or H2SO428 days 5.00 $92
Silica gel treated hexane extracted
materials (HEM-SGT or HEM-TPH)
Oil and Grease -AV EPA 1664 Water (2) 1 L Amber GlassCool < 6 ºC; HCL
or H2SO428 days 5.00 $173
If requested individually, AV is
determined from Total Oil & Grease -
TPH Oil & Grease
Oxygen, Dissolved SM4500OGDrinking Water /
Water
250mL Amber Glass,
Zero HeadspaceCool < 6 ºC Immediately 1.00 $29
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 550 Drinking Water (2) 1 L Amber Glass Cool < 6 ºC 7 days Call for limits
Call for
pricing
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 610 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 20 ug/L $173 Used for Discharge (Clean Water Act)
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 8100
Solid / Soil /
Waste8 oz Wide Mouth Jars Cool < 6 ºC 14 days 1.00 mg/Kg $173
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com134
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 8270 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 10 ug/L $226
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 8270
Solid / Soil /
Waste8 oz Wide Mouth Jars Cool < 6 ºC 14 days
0.333 - 0.666
mg/Kg$226
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 8310 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.2-2.0 ug/L $173
PAHs - Polynuclear Aromatic
HydrocarbonsEPA 8310
Solid / Soil /
Waste8 oz Wide Mouth Jars Cool < 6 ºC 14 days 0.01 - 0.05 mg/Kg $173
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
PCB (Polychlorinated
Biphenyls)EPA 508 Drinking Water (2) 1 L Amber Glass Cool < 6 ºC 1 year Call for limits
Call for
pricing
PCB (Polychlorinated
Biphenyls)EPA 608 Water (2) 1 L Amber Glass Cool < 6 ºC 1 year 2.00 ug/L $87 Used for Discharge (Clean Water Act)
PCB (Polychlorinated
Biphenyls)EPA 8082 Water (2) 1 L Amber Glass Cool < 6 ºC 1 year 1.00 ug/L $87
PCB (Polychlorinated
Biphenyls)EPA 8082 Wipe Call for PCB wipe kit Cool < 6 ºC 1 year 2 ug/Wipe $87
PCB (Polychlorinated
Biphenyls)EPA 8082
Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 1 year 0.500 mg/Kg $87
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
PCB (Polychlorinated
Biphenyls)EPA 8082 Bulk / Caulk 4 oz Glass Jar Cool < 6 ºC 1 year 0.500 mg/Kg $104
PCB (Polychlorinated
Biphenyls)EPA 8082 Bulk / Caulk 4 oz Glass Jar Cool < 6 ºC 1 year Call for limits
Call for
pricing
EPA regions that require soxhlet
extraction for the preparation
procedure EPA 3540C.
Percent Ash ASTM D482Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days Call for limits
Call for
pricing
Percent MoistureEPA 3550 Sec.
7.2Soil 4 oz Glass Jar Cool < 6 ºC 14 days 0.5% $12
Percent SolidsEPA 3550 Sec.
7.2Soil 4 oz Glass Jar Cool < 6 ºC 14 days 0.5% $12
Percent Solids SM2540G Sludge 8 oz glass Jar Cool < 6 ºC 14 days 0.5% $18
Percent Water (Karl Fischer) ASTM D1744 Waste / Oil / Pant 4 oz Glass Jar Cool < 6 ºC 14 days Call for limitsCall for
pricing
Pesticides - Chlorinated EPA 508 Drinking Water (2) 1 L Amber Glass Cool < 6 ºC 7 days Call for limitsCall for
pricing
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com135
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Pesticides - Chlorinated EPA 608 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.1-10 ug/L $145 Used for Discharge (Clean Water Act)
Pesticides - Chlorinated EPA 8081 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.1-10 ug/L $145
Pesticides - Chlorinated EPA 8081Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 14 days 0.02 - 0.2 mg/Kg $145
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
pH SM4500H+BDrinking Water /
Water125 mL Plastic Cool < 6 ºC Immediately N/A $29
Phenol, Total (Phenolics) EPA 420.1 Water (2) 1 L Amber GlassCool < 6 ºC;
H2SO428 days 0.005 - 0.05 $87
Phenol, Total (Phenolics) EPA 9065 Solid/Waste 8 oz Glass JarCool < 6 ºC;
H2SO428 days 0.005 - 0.05 $87
Phosphorate, Ortho (as
Phosphorus)EPA 300.0
Drinking Water /
Water125 mL Plastic Cool < 6 ºC 48 hours 0.326 $29
Phosphorate, Ortho (as
Phosphorus)
EPA 365 as
HACH 8048Drinking Water 125 mL Plastic Cool < 6 ºC 48 hours 0.020 $29
Phosphorus, Total SM4500 PEH Water 250 mL PlasticCool < 6 ºC;
H2SO428 days 0.020 $46
Reactivity (Cyanides/ Sulfides) EPA Chapter 7 Water 500 mL PlasticCool < 6 ºC;
NaOH7 days 200 $87
Reactivity (Cyanides/ Sulfides) EPA Chapter 7Solid / Soil /
Waste8 oz Glass Jar Cool < 6 ºC 14 days 200 mg/Kg $87
Resistivity EPA 120.1 Water 125 mL Plastic Cool < 6 ºC 28 days N/A $18
Semivolatiles EPA 525 Drinking Water (2) 1 L Amber Glass Cool < 6 ºC 7 days Call for limitsCall for
pricing
Semivolatiles EPA 625 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 20-40 ug/L $226 Used for Discharge (Clean Water Act)
Semivolatiles EPA 8270 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 10-40 ug/L $226
Semivolatiles EPA 8270Solid / Soil /
Waste8 oz Wide Mouth Jar Cool < 6 ºC 14 days
0.333 - 0.666
mg/Kg$226
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture.
Semivolatiles - Tentatively
Identified Compounds
(TICs) Library Search
EPA 625 /EPA
8270N/A N/A N/A N/A N/A $46
If requested, TICs must be accompanied
by a corresponding analysis, either EPA
625 or EPA 8270.
Settleable Solids (SS) SM2540F Water 1 L Plastic Cool < 6 ºC 48 hours 0.10 mL/L $18
Silicates (Silica) EPA 200.7Drinking Water /
Water500 mL Plastic HNO3 6 months 0.05 $46
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com136
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Solids, Total (TS) SM2540BDrinking Water /
Water1 L Plastic Cool < 6 ºC 7 days 10.0 $18
Solids, Total (TS) SM2540G Solid / Sludge 16 oz Glass Jar Cool < 6 ºC 7 days 0.01 % $18
Solids, Total Dissolved (TDS) SM2540CDrinking Water /
Water1 L Plastic Cool < 6 ºC 7 days 10.0 $18
Solids, Total Suspended (TSS) SM2540D Water 1 L Plastic Cool < 6 ºC 7 days 1.00 $18
Solids, Total Fixed (TFS) SM2540E Water 1 L Plastic Cool < 6 ºC 7 days 1.00 % $18
Solids, Total Fixed (TFS) SM2540G Solid / Sludge 16 oz Glass Jar Cool < 6 ºC 7 days 1.00 % $18
Solids, Total Volatiles (TVS) SM2540E Water 1 L Plastic Cool < 6 ºC 7 days 1.00 % $18
Solids, Total Volatiles (TVS) SM2540G Solid / Sludge 16 oz Glass Jar Cool < 6 ºC 7 days 1.00 % $18
Specific Conductance SM2510B Drinking Water 125 mL Plastic Cool < 6 ºC 28 days N/A $18
Specific Conductance EPA 120.1 Water 125 mL Plastic Cool < 6 ºC 28 days N/A $18
Specific Gravity ASTM D1475 Waste / Oil / Pant 8 oz Wide Mouth Jar Cool < 6 ºC 7 days N/A $46
Sulfate EPA 300.0Drinking Water /
Water125 mL Plastic Cool < 6 ºC 28 days 0.50 $29
Sulfate EPA 300 Mod.Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 28 days 5.0 mg/Kg $29
Sulfide SM4500S2FDrinking Water /
Water500 mL Plastic
Cool < 6 ºC; Zinc
acetate plus
NaOH
7 days 2.00 $29
Sulfite SM4500SO3BDrinking Water /
Water250 mL Plastic Cool < 6 ºC Immediately 2.00 $29
Sulfur EPA 200.7 Water 500 mL Plastic HNO3 180 days Call for limitsCall for
pricing
Sulfur EPA 6010 Water 500 mL Plastic HNO3 180 days Call for limitsCall for
pricing
Sulfur EPA 6010Solid / Soil /
Waste4 oz Wide Mouth Jar None 180 days Call for limits
Call for
pricing
Surfactants (MBAS) SM5540CDrinking Water /
Water1000 mL Plastic Cool < 6 ºC 48 hours 0.10 $76
Suitability Call for Method Drinking Water
TCLP Herbicides
[excludes extractions]EPA 8151 Water
(2) 1 Liter Amber Glass
w/Teflon Lined CapCool < 6 ºC
14 days
to TCLP
Extraction
0.05 $162
Call for container, preservation, limits and pricing
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com137
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
TCLP Herbicides
[excludes extractions]EPA 8151
Solid / Soil /
Waste
8 oz. Wide Mouth
Glass w/Teflon Lined
Cap
Cool < 6 ºC
14 days
to TCLP
Extraction
0.05 $162
TCLP Metals
[excludes extractions]EPA 6010/7470 Water 500 mL Plastic Cool < 6 ºC
6 months
(Hg-28 days)
to TCLP
Extraction
0.5 - 10.0 $104
TCLP Metals
[excludes extractions]EPA 6010/7470
Solid / Soil /
Waste4 oz Wide Mouth Jar Cool < 6 ºC
6 months
(Hg-28 days)
to TCLP
Extraction
0.5 - 10.0 $104
TCLP Pesticides
[excludes extractions]EPA 8081 Water
(2) 1 Liter Amber Glass
w/Teflon Lined CapCool < 6 ºC
14 days
to TCLP
Extraction
0.001 - 0.1 $145
TCLP Pesticides
[excludes extractions]EPA 8081
Solid / Soil /
Waste
8 oz. Glass w/ Teflon
Lined CapCool < 6 ºC
14 days
to TCLP
Extraction
0.001 - 0.1 $145
TCLP Semivolatiles [excludes
extractions]EPA 8270 Water
(2) 1 Liter Amber Glass
w/Teflon Lined CapCool < 6 ºC
14 days
to TCLP
Extraction
0.100 $226
TCLP Semivolatiles [excludes
extractions]EPA 8270
Solid / Soil /
Waste
8 oz. Glass w/ Teflon
Lined CapCool < 6 ºC
14 days
to TCLP
Extraction
0.100 $226
TCLP Volatiles EPA 8260 Water (3) 40 mL Vials Cool < 6 ºC; 14 days 0.050 - 0.250 $145
TCLP- Volatiles
(includes ZHE)EPA 8260/ZHE
Solid / Soil /
Waste4 oz. Wide Mouth Jar Cool < 6 ºC;
14 days
to TCLP
Extraction
0.050 - 0.250 $226
TCLP- Extraction only
(non-VOA)EPA 1311 N/A N/A N/A
14 days;
6 months
Metals
(Hg-28 days)
to TCLP
Extraction
N/A $69
Temperature (Field) SM2550B Various 125 mL Plastic N/A Immediately N/A $12 Field measurement only
THM (THM) EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC, HCl,
Ascorbic acid14 days 2.00 - 5.00 ug/L $191
Chloroform, Chlorodibromomethane,
Dibromochloromethane, Bromoform
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com138
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Total Trihalomethanes (TTHM) EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC, HCl,
Ascorbic Acid14 days 2.00 - 5.00 ug/L $191
Chloroform, Chlorodibromomethane,
Dibromochloromethane, Bromoform
Total Halides
(TX)EPA 9020 Oil 4 oz Glass Jar Cool < 6 ºC; 14 days Call for limits
Call for
pricing
Total Kjeldahl Nitrogen (TKN) EPA 351.2 Water 250 mL PlasticCool < 6 ºC;
H2SO428 days 0.25 $46
Total NitrogenEPA351.2 /
SM4500NO3FWater 250 mL Plastic
Cool < 6 ºC
H2SO428 days 0.25 $104
Sum of the Total Kjeldahl Nitrogen and
Nitrate-Nitrite Analysis.
Total Organic Carbon
(TOC)SM5310C
Drinking Water /
Water250 mL Amber Glass
Cool < 6 ºC;
H2SO428 Days 1.00 $46
Total Organic Carbon
(TOC)EPA 9060
Solid / Soil /
Waste250 mL Amber Glass Cool < 6 ºC; 28 days 10.0 mg/kg $46
Total Organic Halides
(TOX)EPA 9020 Water 250 mL Amber Glass
Cool < 6 ºC
H2SO47 days Call for limits
Call for
pricing
Toxicity - Acute
Toxicity - Chronic
TPH-DRO EPA 8015 Water (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.50 $76
TPH-DRO EPA 8015Solid / Soil /
Waste8 oz Wide Mouth Jar Cool < 6 ºC 14 days 10.0 mg/Kg $76
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture
TPH-GRO EPA 8015 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
500 ug/L $64
TPH-GRO EPA 8015Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 10.0 mg/Kg $64
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture
TPH-HEM 1664 Water (2) 1 L Amber Glass Cool < 6 ºC
HCL or H2SO428 days 5 mg/L $92
Call for Container, Preservation and Pricing
Call for Container, Preservation and Pricing
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com139
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
TPH - Leachable HEM O&G1664/ ASTM
D3987Solids 8 oz Glass Jar Cool < 6 ºC 28 days 5 mg/L $145
Leachable TPH includes ASTM D3987
tumble
Turbidity EPA 180.1Drinking Water /
Water125 mL Plastic Cool < 6 ºC 48 hours 1 NTU $18
Viscosity ASTM D2196 Liquids
Call for container,
preservation, limits
and pricing
Volatiles EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC, HCl,
Ascorbic Acid14 days 2.00 - 5.00 ug/L $191
Volatiles EPA 624 Water (3) 40 mL Vials HCl 14 days 2-10 ug/L $145 Used for Discharge (Clean Water Act)
Volatiles EPA 8260 Water (3) 40 mL Vials HCl 14 days 1.00-25 ug/L $145
Volatiles EPA 8260Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 0.050 - 1.25 mg/Kg $145
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture
Volatiles - Aromatic
(BTEX, MTBE, Naphthalene)EPA 8021 Water (3) 40 mL Vials Cool < 6 ºC, HCl
14 days
preserved /
7 days
unpreserved
1-5 ug/L $69
Volatiles - Aromatic
(BTEX, MTBE, Naphthalene)EPA 8021
Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.0 mg/Kg $69
Nominal limit for soils. Final Detection
limit adjusted for sample weight and
percent moisture
Volatiles - Tentatively
Identified Compounds (TICs)
Library Search
Various N/A N/A N/A N/A N/A $29
If requested, TICs must be accompanied
by a corresponding analysis, either EPA
624 or EPA 8260
Volatile Suspended Solids
(VSS)SM2540E Water 1 L Plastic Cool < 6 ºC 7 days 1.00 $18
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com140
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
TCL & TAL Pkg. - Full,
(VOA, SVOA, Pest/PCB,
Metals and Cn)
EPA 8260Remediation/
Ground Water(3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 1.00 - 10.0 ug/L $866 Volatiles
EPA 8270 (2) 1 L Amber Glass Cool < 6 ºC 7 days 10.0 - 40.0 ug/L Semivolatiles
EPA 8081 (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.100 - 2.00 ug/L Pesticides
EPA 8082 (2) 1 L Amber Glass Cool < 6 ºC 1 year 1.00 ug/L PCBs (Polychlorinated Biphenyls)
EPA 6010 500 mL PlasticCool < 6 ºC
HNO36 months 0.05 - 0.5
Aluminum, Antimony, Arsenic, Barium,
Beryllium, Cadmium, Calcium,
Chromium, Cobalt, Copper, Iron, Lead,
Magnesium, Manganese, Molybdenum,
Nickel, Potassium, Selenium, Silver,
Thallium, Vanadium, Zinc
EPA 7470 28 days 0.0005 Mercury
SM4500CN C&E 500 mL PlasticCool < 6 ºC
NaOH14 days 0.02 Cyanide
TCL & TAL Pkg. - Full,
(VOA, SVOA, Pest/PCB,
Metals and Cn)
EPA 8260Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 0.05 - 0.5 mg/Kg $866 Volatiles
EPA 8270 (2) 8 oz Glass Jars 14 days0.333 - 0.666
mg/KgSemivolatiles
EPA 8081 14 days0.020 - 0.200
mg/KgPesticides
EPA 8082 1 year 0.500 mg/Kg PCBs (Polychlorinated Biphenyls)
EPA 6010 6 months 4.00 ug/g
Aluminum, Antimony, Arsenic, Barium,
Beryllium, Cadmium, Calcium,
Chromium, Cobalt, Copper, Iron, Lead,
Magnesium, Manganese, Molybdenum,
Nickel, Potassium, Selenium, Silver,
Thallium, Vanadium, Zinc
EPA 7470 28 days 0.025 ug/g Mercury
SM4500CN C&E 14 days 1.00 mg/Kg Cyanide
Profiles
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com141
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
EPA 8260Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 0.05-1.25 $751
TCLP tumbling (leaching) procedure
performed by EPA 1311
EPA 8270 (2) 8 oz Glass Jars 14 days 0.1
EPA 8081 14 days 0.001-0.010
EPA 8151 14 days 0.05
EPA 6010 6 months 0.100 - 10.0
EPA 7470 28 days 0.002
TCLP - Full, (VOA, SVOA,
Pest, Herb, Metals includes
extraction)
EPA 8260Remediation/
Ground Water(3) 40mL VOA Vials Cool < 6 ºC 14 days 0.05-1.25 $751
TCLP tumbling (leaching) procedure
performed by EPA 1311
EPA 8270 1 L Amber Glass Cool < 6 ºC 14 days 0.1
EPA 8081 1 L Amber Glass Cool < 6 ºC 14 days 0.001-0.010
EPA 8151 1 L Amber Glass Cool < 6 ºC 14 days 0.05
EPA 6010 500 mL Plastic Cool < 6 ºC 6 months 0.100 - 10.0
EPA 7470 500 mL Plastic Cool < 6 ºC 28 days 0.002
TCLP - Full + RIC, (VOA,
SVOA, Pest, Herb, Metals,
Reactivity, Ignitability,
Corrosivity - includes
extraction)
EPA 8260Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 0.05-1.25 $866
TCLP tumbling (leaching) procedure
performed by EPA 1311
EPA 8270 (2) 8 oz Glass Jars 14 days 0.1
EPA 8081 14 days 0.001-0.010
EPA 8151 14 days 0.05
EPA 6010 6 months 0.100 - 10.0
EPA 7470 28 days 0.002
Chapter 7 14 days 200 mg/Kg
ASTM D93 14 days > 60ºC
EPA 9040C 14 days NA
TCLP - Full, (VOA, SVOA,
Pest, Herb, Metals - includes
extraction)
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com142
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
TCLP - Full + RIC, (VOA,
SVOA, Pest, Herb, Metals,
Reactivity, Ignitability,
Corrosivity - includes
extraction)
EPA 8260Remediation/
Ground Water(3) 40mL VOA Vials Cool < 6 ºC 14 days 0.05-1.25 $866
TCLP tumbling (leaching) procedure
performed by EPA 1311
EPA 8270 1 L Amber Glass Cool < 6 ºC 14 days 0.1
EPA 8081 1 L Amber Glass Cool < 6 ºC 14 days 0.001-0.010
EPA 8151 1 L Amber Glass Cool < 6 ºC 14 days 0.05
EPA 6010 500 mL Plastic Cool < 6 ºC 6 months 0.100 - 10.0
EPA 7470 500 mL Plastic Cool < 6 ºC 28 days 0.002
Chapter 7 500 mL Plastic Cool < 6 ºC 14 days 200
ASTM D93 14 days > 60ºC
EPA 9040C 14 days NA
Priority Pollutants - Full, (VOA,
BNA, Pest/PCB, and Metals
and CN)
EPA 624 Water (3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 2.00 - 10.0 ug/L $693 Volatiles
EPA 625 (2) 1 L Amber Glass Cool < 6 ºC 7 days 20.0 - 40.0 ug/L Semivolatiles
EPA 608 (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.100 - 2.00 ug/L Pesticides / PCBs
EPA 200.7 500 mL PlasticCool < 6 ºC
HNO36 months 0.05 - 0.5 Metals
EPA 245.2 28 days 0.0002 Mercury
SM4500CN C& E 500 mL PlasticCool < 6 ºC
NaOH14 days 0.020 Cyanide
Total Toxic Organics
(TTO)EPA 624 Water (3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 0.002 - 0.010 $145
Total Toxic Organics generally includes
EPA 624, 625 and 608; components are
priced individually
EPA 625 (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.010 - 0.020 $226
EPA 608 (2) 1 L Amber Glass Cool < 6 ºC 7 days 0.005 - 0.008 $145
Primary Inorganics
(Safe Drinking Water Act)EPA 200.8 Drinking Water 500 mL Plastic
Cool < 6 ºC
HNO3
6 months
(Hg - 28 days)0.0025 - 0.010 $295
Antimony, Arsenic, Barium, Beryllium,
Cadmium, Chromium, Copper, Lead,
Mercury, Selenium, Thallium
EPA 300.0 125mL Plastic Cool < 6 ºC 48 hours 0.100 - 0.16 Fluoride, Nitrate, Nitrite
SM4500CNC & E 500 mL PlasticCool < 6 ºC
NaOH14 days 0.020 Cyanide
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com143
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Secondary Inorganics
(Safe Drinking Water Act)EPA 200.7 Drinking Water 500 mL Plastic
Cool < 6 ºC
HNO336 months 0.050 $243
Aluminum, Iron, Manganese, Silver,
Zinc
SM2120B 500 mL Plastic Cool < 6 ºC 48 hours 5 CU Color
EPA 300.0 125mL Plastic Cool < 6 ºC 28 days 0.250 - 0.500 Chloride, Fluoride, Sulfate
SM5540C 1000 mL Plastic Cool < 6 ºC 48 hours 0.100 MBAS
SM4500H+B 125mL Plastic Cool < 6 ºC Immediately N/A pH
SM2540C 1000 mL Plastic Cool < 6 ºC 7 days 10 Total Dissolved Solids
Primary Metals Only (SDWA) EPA 200.8 Drinking Water 500 mL PlasticCool < 6 ºC
HNO3
6 months
(Hg - 28 days)0.0025 - 0.010 $231
Antimony, Arsenic, Barium, Beryllium,
Cadmium, Chromium, Copper, Lead,
Mercury, Selenium, Thallium
Secondary Metals Only
(SDWA)EPA 200.7 Drinking Water 500 mL Plastic
Cool < 6 ºC
HNO36 months 0.050 $110
Aluminum, Iron, Manganese, Silver,
Zinc
Hazardous Waste Profile A EPA 8021Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.00 mg/Kg $578
Benzene, Toluene, Ethylbenzene,
Xylenes
EPA 9040C (2) 16 oz Glass Jars Immediately N/A Corrosivity
ASTM D93 14 days 75ºC Flashpoint
EPA 9095A 14 days N/A Free Liquids
EPA 8082 1 year 0.500 mg/Kg PCBs (Polychlorinated Biphenyls)
EPA 3550 Sec 7.2 14 days N/A Percent Moisture
Chapter 7 14 days 200 mg/Kg Reactivity
EPA 6010 6 months 0.100 - 10.0TCLP Metals: Arsenic, Barium,
Cadmium, Chromium, Lead, Selenium
EPA 7470 28 days 0.002 TCLP Mercury
EPA 8015 14 days 10 mg/Kg Diesel Range Organics (DRO)
EPA 8015 14 days 10 mg/Kg Gasoline Range Organics (GRO)
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com144
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Hazardous Waste Profile A EPA 8021Remediation/
Aqueous Liquid(3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 1.00 - 10.0 ug/L $578
Benzene, Toluene, Ethylbenzene,
Xylenes
EPA 9040C 125 mL Plastic Cool < 6 ºC 14 days N/A Corrosivity
ASTM D93 500 mL Plastic 14 days 75oC Flashpoint
EPA 9095A 500 mL Plastic 14 days N/A Free Liquids
EPA 8082A(2) 1 Liter Amber Glass
w/Teflon Lined Cap1 year 1.00 ug/L PCBs (Polychlorinated Biphenyls)
SM2540B 500 mL Plastic 14 days N/A Percent Solids / Moisture
Chapter 7 500 mL Plastic 14 days 200.000 Reactivity
EPA 6010 500 mL Plastic 14 days 0.100 - 10.0TCLP Metals: Arsenic, Barium,
Cadmium, Chromium, Lead, Selenium
EPA 7470 14 days 0.002 TCLP Mercury
EPA 8015(2) 1 Liter Amber Glass
w/Teflon Lined Cap7 days 0.500 Diesel Range Organics (DRO)
EPA 8015 (3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 500 ug/L Gasoline Range Organics (GRO)
Hazardous Waste Profile B EPA 8021Solid / Soil /
Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.00 mg/Kg $485
Benzene, Toluene, Ethylbenzene,
Xylenes
EPA 9095A(2) 16 oz
Glass Jars14 days N/A Free Liquids
EPA 8082 1 year 0.500 mg/Kg PCBs (Polychlorinated Biphenyls)
EPA 3550 Sec 7.2 14 days N/A Percent Moisture
EPA 6010 6 months 0.100 - 10.0TCLP Metals: Arsenic, Barium,
Cadmium, Chromium, Lead, Selenium
EPA 7470 28 days 0.002 TCLP Mercury
EPA 8015 14 days 10 mg/Kg Diesel Range Organics (DRO)
EPA 8015 14 days 10 mg/Kg Gasoline Range Organics (GRO)
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com145
Analyte Name Method Matrix Container Preservation Holding TimeQuantitation
Limits (mg/L)
Unit PriceComments
Hazardous Waste Profile B EPA 8021Remediation/
Aqueous Liquid(3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 1.00 - 10.0 ug/L $485
Benzene, Toluene, Ethylbenzene,
Xylenes
EPA 9095A 500 mL Plastic Cool < 6 ºC 14 days N/A Free Liquids
EPA 8082(2) 1 Liter Amber Glass
w/Teflon Lined Cap1 year 1.00 ug/L PCBs (Polychlorinated Biphenyls)
SM2540B 500 mL Plastic 14 days N/A Percent Solids / Moisture
EPA 6010 500 mL Plastic 14 days 0.100 - 10.0TCLP Metals: Arsenic, Barium,
Cadmium, Chromium, Lead, Selenium
EPA 7470 14 days 0.002 TCLP Mercury
EPA 8015(2) 1 Liter Amber Glass
w/Teflon Lined Cap7 days 0.500 Diesel Range Organics (DRO)
EPA 8015 (3) 40mL VOA Vials Cool < 6 ºC; HCl 14 days 500 ug/L Gasoline Range Organics (GRO)
Sample Preparation Fee Various Solid VariousSee Specific
Analyte Method
See Specific
Analyte
Method
N/A $29
Sample preparation fee applied if a
sample matrix requires further
reduction prior to analysis. Client
notification by Analytics required.
Miscellaneous
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com146
V. Miscellaneous Services and Fees
1. Introduction
By providing these more specialized analyses, Analytics has found that it truly
provides our clients a full-service “one stop shop” for their analytical testing needs
and requirements. Miscellaneous Services are the remaining laboratory analyses that
are less commonly run and do not necessarily conform to the traditional industrial
hygiene or environmental testing section of our service directory. The analyses
contained in the section are:
• Microbiology: Bacteria in Air
• Microbiology: Bacteria in Water
• Microbiology: Fungal
• Air Quality Testing
Since Analytics performs a wide array of analytical methodologies in-house, we do not
normally subcontract any samples. If, however, we do not run the analysis, then the
use of a qualified laboratory for subcontracted analytical services must be agreed to
by Analytics’ client before the analyses take place. By providing subcontract services,
Analytics can serve as your “one-stop shop” for all your testing needs.
Samples that require analysis by a subcontract laboratory for capability, test
verification, or workload purposes are subcontracted whenever possible to a
laboratory which is deemed competent by Analytics based upon accreditation and
work history (for instance, IH sample subcontracting will be to an AIHA-accredited lab
whenever feasible). Customer acceptance of subcontracting, in writing whenever
possible, is obtained before subcontracting, and the subcontract laboratory is
prominently identified in reporting of results. Analytics remains responsible for
subcontracted testing unless the customer or a regulatory authority has specified
the subcontract laboratory to be employed.
Analytics completes a separate chain-of-custody (COC) document to accompany the
samples to the subcontract laboratory. Upon receipt of the data, the laboratory
director and/or project manager reviews the results prior to sending the data. Any
problems encountered with subcontracted analyses should be communicated to the
project manager at Analytics. Analytics will then contact our subcontract laboratory
so the project manager remains the sole contact.
147
V 2. Microbiology: Bacteria in AirTest Procedure Method of Analysis Sampling Media Sampling Rate Suggested Air
Volume, L
Unit Cost
Total Bacterial Count, Air Visual Plate CountContact Customer Service for
Media Requirements
For Andersen Impactor:
28.3 L/min100-300 Call for Pricing
Total Bacterial Count, Air with
Identification
(Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
Contact Customer Service for
Media Requirements
For Andersen Impactor:
28.3 L/min100-300 Call for Pricing
V 3 Microbiology: Bacteria in WaterParameter Method Sample Container Preservative Holding Time Cost
Total Bacterial Count, Bulk Visual Plate Count Bulk Material N/A N/A Call for Pricing
Total Bacterial Count, Bulk with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
Bulk Material N/A N/A Call for Pricing
Total Bacterial Count, Water Visual Plate Count100 mL of water in sterile
container, refrigeratedNA2S2O3 24 hours Call for Pricing
Total Bacterial Count, Water with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
100 mL of water in sterile
container, refrigeratedNA2S2O3 24 hours Call for Pricing
Total Bacterial Count, Wipe Visual Plate Count Wipe Specimen 163100 N/A 24 hours Call for Pricing
Total Bacterial Count, Wipe with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
Wipe Specimen 163100 N/A 24 hours Call for Pricing
Total Coliform SM9221B 120 mL sterile plastic NA2S2O3 24 hours Call for Pricing
Total Coliform MPN (For bacte- ria
counts)SM9221C 120 mL sterile plastic NA2S2O3 24 hours Call for Pricing
Fecal Coliform MPN SM9221C 120 mL sterile plastic NA2S2O3 8 hours Call for Pricing
Fecal Steptococcus MPN SM9230B 120 mL sterile plastic NA2S2O3 8 hours Call for Pricing
Fecal Enterococcus MPN SM9230B 120 mL sterile plastic NA2S2O3 8 hours Call for Pricing
Heterotrophic Plate Count SM9215B 100 mL in sterile container NA2S2O3 8 hours Call for Pricing
Legionella Culture and ID 100 mL in sterile container NA2S2O3 24 hours Call for Pricing
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com148
Fungal - Viable / Cultured
Test Procedure Method of Analysis Sampling Media Sampling RateSuggested Air
Volume, LUnit Cost
Total Fungal Count, Air Visual Plate CountContact Customer Service for
Media Requirements
For Andersen Impactor:
28.3 L/min100-300 Call for Pricing
Total Fungal Count, Air with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
Contact Customer Service for
Media Requirements
For Andersen Impactor:
28.3 L/min100-300 Call for Pricing
Total Fungal Count, Bulk Visual Plate Count Bulk Material N/A N/A Call for Pricing
Total Fungal Count, Bulk with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
Bulk Material N/A N/A Call for Pricing
Total Fungal Count, Water Visual Plate Count100 mL of water in sterile
container, refrigeratedN/A N/A Call for Pricing
Total Fungal Count, Water with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
100 mL of water in sterile
container, refrigeratedN/A N/A Call for Pricing
Total Fungal Count, Wipe Visual Plate Count Wipe Specimen 163100 N/A N/A Call for Pricing
Total Fungal Count, Wipe with
Identification (Specify No. to ID)
Visual Plate Count
and Laboratory
Identification
Wipe Specimen 163100 N/A N/A Call for Pricing
Fungal - Non-Viable / Direct Analysis
Test Procedure Method of Analysis Sampling Media Sampling RateSuggested Air
Volume, LUnit Cost
Mold Spore Count & ID (Air) Standard Microscopy Air-O-Cell Cassette 15 LPM 150 Call for Pricing
Mold Spore ID (Bulk) Standard Microscopy Zip-Loc Bag 1x1 Inch N/A Call for Pricing
Mold Spore Count/ID and Particulate
ProfileStandard Microscopy Air-O-Cell Cassette 15 LPM 150 Call for Pricing
V01 06.2017
Toll Free: 800-888-8061
Find more info at www.analyticscorp.com149
V 5. Air Quality Testing
Method Compounds Sampling Approach Instrumentation Detection Limit Unit Price
TO-4 PCBs, 4,4-DDE, DDT, DDD Filter and PUF absorbent trap GC/MS or GC/FID/ECD 0.2 pg/m3 – 200 ng/m3 Call for Pricing
TO-8 Cresol/Phenol Midget impingers HPLC 1-250 ppb Call for Pricing
TO-14 Toluene, Benzene, Chlorobenzene Evacuated stainless steel canister GC/MS or GC/FID/ECD 0.2-25 ppbv Call for Pricing
TO-15 Methanol, Benzene, Xylene, Nitrobenzene Specially prepared canisters GC/MS 0.2-25 ppbv Call for Pricing
TO-17Alcohols, Ketones, Benzene, Toluene, o-
Xylene, ChlorobenzeneMulti-Bed Sorbent Tube GC/MS 0.2-25 ppbv Call for Pricing
Particulate Size Estimate
(Bulk, Surface or Air)
Standard Microscopy
2 Ranges: <2.5 µm, ≥2.5 μm or
<10 μm, ≥10 μm
Bulk – Sealable glass or plastic vials
Surface - micro-vac on MCEF.
Air - MCEF
N/A N/A Call for Pricing
Particulate Size Estimate
(Bulk, Surface or Air)
Standard Microscopy
2 Ranges: <2.5 µm, ≥2.5 μm or
<10 μm, ≥10 μm
Bulk – Sealable glass or plastic vials
Surface - micro-vac on MCEF.
Air - MCEF
N/A N/A Call for Pricing
Particle/Fiber Characterization
& IdentificationStandard Microscopy
Mini-vac samples, scrapings, bulk
materials in sealed bags, tape lifts, or
MCEF filters
N/A N/A $102
V01 06.2017Toll Free: 800-888-8061
Find more info at www.analyticscorp.com150
VI. Service Guide Summary
1. Standard Terms and Conditions
Unless otherwise agreed to in a formal contract, services provided by Analytics Corporation are limited to the terms and conditions stated below.
Confidentiality – Strict confidentiality is maintained in all business dealings with clients. Confidentiality agreements are therefore willingly provided. In instances where information is subpoenaed by and must be released to a regulatory or legal body, the client is promptly notified. Likewise, the client agrees to respect all such relationships of trust. Client agrees it will not use Analytics’ name and/or data in any manner which might cause harm to Analytics’ business and/or reputation. Under no circumstances is the name Analytics Corporation (Analytics) to be published without written approval.
No verbal results, preliminary or final reports, copies of reports, or electronic deliverables will be sent to anyone other than the client unless the client formally requests us to do so in writing. Contracts – All contracts are subject to review and approval and must be signed by a corporate officer. Payment Terms – Payment in advance is required for all clients except those who establish credit with our company. For clients with approved credit, our standard terms due upon receipt, after which time a 1% per month late charge or maximum amount permitted by law (if less) is added to all unpaid balances. Any deviation in payment terms must be agreed to in writing. Analytics has the right to ask for payment in advance, if the established payment terms are not adhered to. Analytics reserves the right to cease all work in the event the client does not pay its invoices. In the event of default in payment for services rendered, the client is responsible for reasonable collection and/or legal fees.
Billing – All fees are billed directly to the client. Third party billing will not be accepted without a statement, signed by the third party, which acknowledges and accepts payment responsibility. All paperwork submitted with a sample describes the testing desired, and any changes must be submitted in writing. If changes are made after the original request is initiated or has been completed, the client must accept payment responsibility. Analytics is not responsible for holding times that are exceeded due to such changes. All changes should be faxed to: “CLIENT SERVICES - URGENT”.
Rush Analyses – A surcharge is added to the agreed upon fee if rush analysis is requested. The surcharge will depend upon the turnaround time requested. Rush analysis is offered contingent upon availability and pre-arrangement with Client Services or your project manager.
Hazard Communication – It is the client’s responsibility to information the laboratory of any hazardous characteristics known or suspected about the sample based on the collection site or circumstances. Information on hazard prevention and personal protection should also be provided to Analytics.
Delivery of Samples – Upon timely delivery of samples, Analytics will use best efforts to meet mutually agreed upon turnaround times. The risk of loss or damage to the sample during shipment remains with the client. Analytics will advise the client of samples that are missing or received in damaged, contaminated, or improperly preserved condition. The risk of loss or damage to the sample will be assumed by Analytics at the time possession of the sample is delivered to an employee.
151
Analytics reserves the right to refuse or to rescind acceptance of any samples, which in the judgment of Analytics is likely to pose any unreasonable risk in handling and/or analysis.
The client aggress that any sample containing any hazardous substance which is to be delivered to Analytics is labeled, packaged, manifested, transported, and delivered to Analytics in accordance with the most current state and federal regulations. These regulations include, but are not limited to OSHA, EPA, TSCA, RCRA, DOT, FDA and applicable federal, state, and local agencies.
Sample Containers – Analytics will provide sample containers/media upon request. Analytics reserves the right to charge a fee for sample containers/media. Containers, media, and packaging not returned after thirty days will be assessed a fee based on cost plus 25%.
Retention of Samples – After the analytical results have been reported, samples are routinely retained in our storage facilities for 30 days. Prior arrangements must be made if samples are to be held for periods longer than this. Analytics may charge a monthly fee for long-term storage.
Quality Assurance – Analytics will perform services consistent with our Quality Assurance Program Plans (QAPP) and our Standard Operating Procedures. (SOPs). It is the responsibility of the client to confirm that our standard practices meet the needs of the client prior to placing an order for work. In the event the client desires an alternative to these standard practices, such request must be made in writing prior to samples acceptance.
Retention of Reports – Unless otherwise agreed to in writing, Analytics will retain copies of analytics reports for a period of five (5) years, after which the reports may be destroyed. If the client requests additional copies of the analytical reports during the retention period, an additional charge may apply for preparation and printing.
Reports – Analytics prohibits the use of its name in connection with any unauthorized use of its reports. Special Reports – Additional charges may be necessary for customized reports which differ significantly from the Analytics’ standard report. Additional charges may apply for specific QA/QC report formats for data packages and/or electronic deliverables. Please call for specific charges.
Hazardous Waste – Unused portions of samples found or suspected to be hazardous according to state or federal guidelines may be returned to the client upon completion of the analytical work. These include samples known or suspected to contain hazardous materials as defined by state or federal regulatory agencies. The cost of returning the sample may be invoiced to the client. The sample and portions thereof remain the property of the client at all times.
Litigation – All costs associated with compliance to any subpoena or other official request for documents, for testimony in a court of law, or for any other purpose relating to work performed by Analytics in connection with work performed for that client, shall be paid by the client. Such costs shall include, but are not limited to, hourly charge for persons involved in responding to subpoenas, travel and accommodations, mileage, attorney’s preparation of testifier and advice of counsel in connection with response to subpoenas, and all other expenses deemed reasonable and associated with said litigation.
152
Indemnification, Liability, and Insurance – Analytics agrees to indemnify, defend, and save the client, its officers, directors, employees, agents, and representatives harmless from all losses, expenses, demands, and claims made against the clients, its officers, directors, employees, agents, and representatives because of any personal injuries, death, or property damage to the extent caused by the negligence or willful misconduct of Analytics, its employees, agents, or representatives in connection with the performance of services under this agreement, except to the extent such losses, expenses, demands, or claims occur as a result of the negligent or willful acts or omissions of the client, its officers, directors, employees, agents, and representatives; however, such indemnification and damages shall, in the aggregate, be limited to an amount equal to the lesser of (a) damages suffered by the client as a direct result thereof, or (b) the total amount paid by the client to Analytics for the work herein covered. Analytics will, if requested by the client, furnish certificates of insurance from its carrier(s) evidencing appropriate insurance coverage.
Warranty and Limits of Liability – In accepting analytical work, we warrant the accuracy of test results for the sample as submitted. The foregoing express warranty is exclusive and is given in lieu of all other warranties, expressed or implied. We disclaim any other warranties, expressed or implied, including a warranty of fitness for particular purpose and warranty of merchantability. In no event shall Analytics be liable for indirect, special, consequential, or incidental damages including, but not limited to, damages for loss of profit or goodwill regardless of the negligence (either sole or concurrent) of Analytics and whether Analytics has been informed of the possibility of such damages. We accept no legal responsibility for the purposes for which the client uses the test results. No purchase order or other order for work shall be accepted by Analytics which includes any conditions that vary from the above described Standard Terms and Conditions, and Analytics hereby objects to any conflicting terms contained in any acceptance or order submitted by client.
Equal Opportunity/Affirmative Action Notice – Analytics Corporation is an equal opportunity/affirmative action employer and complies with all the regulations of executive order 11246 and the regulations promulgated there under.
153