Tables are generally 30” high and 30” deep. Thelength of a table will vary but the most standard sizes are 6 and 8 feet long.

v A “three sided” table cover covers the top of the table, both sides and front; leaving the back exposed.

v A “four sided” table cover has a piece of mate-rial neatly sewn on the back side which drapes down covering the back of the table.

v A “flat” table cover drapes at the corners of the table and will hang down to an inch above the floor.A set of slight dimples will appear at the corners.

v A “fitted” table cover has sewn corners that fit snuggly against the table like a fitted bed sheet. A “fitted” table cover will fit on the length and width of the table it was made to fit with no versatility.

The key consideration here is whether to go with a flat or fitted table cover. If you are going to use the same size table every time you use the table cover then the fitted style will work. If you expect variation in the size of tables you use (e.g. sometimes a 6’ and sometimes an 8’ table) then order different sized table covers or a longer flat one.

Table & CoverSizes

6 feet

30” high

30” deep

Table Covers display your corporate logo, school mascot or association name to help you make a

positive first impression while providing valuable information to those who come to your booth,

registration table or product display.

Choosing the correct size and configuration for your table cover is important. This brochure will help

you and your client understand which product best matches your needs.

TABLEC OVER S

NEW!Full Color Dye Sub

Imprints!

v Poly/Cotton Twill: Our standard material is a65% poly and 35% cotton blend. This popularmaterial offers the best combination of durabilityand value; It imprints well and has a rich character.

We offer 16 different colors of this material.Our burgundy color is 100% cotton twill so whiteimprints show as pure white.

The poly/cotton table covers have hemmed edges.

v Polyester: We also offer 13 different colors in a 100% polyester material. Polyester characteristicsinclude stain and flame resistance.

White polyester material must be used on the4-color dye sub imprint orders.

Polyester table covers have surged edges.

v Unimprinted table covers ship in 48 hours.

v Material colors may not be PMS matched.

v All materials may be machine washed in cold water on the gentle cycle. Tumble dry on low heat. Use no bleach or chlorine. Do not dry clean. May be ironed. Do not iron the imprint.

M aterials & M aterialColors

Red

Royal Blue

Forest Green

Purple

Grey

Burgundy

White

Kelly Green

Natural

Teal

Black

Yellow

Navy Blue

Athletic Gold Orange

Tan

M aterial Colors

All colors are approximate representations.* Available in Polyester.

*

*

*

*

*

*

*

**

* *

*

*

Contact your promotional products distributor today !

425-308-3045 ~ 888-313-6319

INFORMATION GUIDE

NE W Full color, D ye Sublimation imprints areavailable on white polyester table covers!

FULL C OLOR !FFULULULULULULULLLL CC OOLLLOOORRR !!FULL C OLOR !

What size table do I most frequently use? Do I need all four sides of the table covered or just three? Do I want a flat or a fitted table cover?

What message or logo do I need to display? What color scheme am I using? How many tables do I use at an event? How many people need table covers during the year?

1

2

3

4

5

6

7

Imprint Space& Colors

B uying D ecisionChecklist

The standard imprint space is 34” wide by 22” highcentered on the front view of the table.

We have 15 standard imprint colors (see below), and now offer full color imprinting on white polyester.

Imprints in non-standard locations (top or sides of cover) are available. Please contact the factory for details.

34” Wide

22” High

4 foot table cover shown

All colors are approximate representations.

Fitted Flat

4 Foot

6 Foot

8 Foot

4 Foot

6 Foot

8 Foot

Cover Styles

8 Foot6 Foot

D ye SubAvailable in 6 foot and 8 foot flat.

NEW!Full Color

Standard Imprint ColorsBlack

RedPMS 185

Process Blue

BurgundyPMS 209

Royal BluePMS 293

White

GoldPMS 123

Lt GreenPMS 354

Forest GreenPMS 357

Metallic GoldPMS 872

Reflex Blue

OrangePMS 021

YellowPMS 108

Navy BluePMS 295

Metallic SilverPMS 877

What’s the di�erence between flat and fitted tablecovers? Flat table covers drape at the corners of the table and will hang down to an inch above the floor. A set of slight dimples willappear at the corners. A fitted table cover is made for a specific size table and has sewn corners like a fitted bed sheet.

Can you match the fabric color to a PMS color? No.

How many colors can you print on the table cover? We can print up to 6 spot colors on any of the table covers or print full color on a white (only) polyester table cover.

Can you print in non-standard locations?Yes. The standard imprint position is centered on the front view of the table cover. The most common non-standard locations are the top and sides.

How are 3 sided and 4 sided table covers di�erent?Three sided table covers reach over the table’s top, front and two sides leaving the back of the table exposed. The four sided cover reaches over the back of the table in addition to the top and sides.

Can you walk me through the table cover measurements? Standard table sizes are 30” high and 30” deep across the top of the table. The length of a table will vary in 2’ increments like 4’, 6’ or 8’ length tables. Table covers will reach down to just above the floor on the front of the table and across the top of the table plus down the two short sides of the table, again to just above the floor. A three sided table cover will leave the back exposed while the four-sided table cover will have a piece of material that covers the back of the table.Please see the diagram under “Table and Cover Sizes”.

Can table covers be dry cleaned? Machine washed? All materials may be machine washed in cold water on thegentle cycle. Tumble dry low heat. Use no bleach or chlorine.Do not dry clean. May be ironed. Do not iron the imprint.

F. A. Q.

425-308-3045 ~ 888-313-6319