tabels

4

Click here to load reader

Upload: dudynayn

Post on 06-Dec-2015

214 views

Category:

Documents


0 download

DESCRIPTION

gg

TRANSCRIPT

Page 1: tabels

To,The Managing DirectorGSIDC LTd7th FloorEDC Building Panjim

8-Oct-15

QuotationRef:

SrNo Description Unit Qty Rate Amount

1 Each 10 10000.00 100000.00

2 Each 4 7000.00 28000.00

3 Each 2 15000.00 30000.00

4 Set 150 2000.00 300000.00

5 Each 2 3600.00 7200.00

Providing and placing in position Officers / Teachers Table in office/ Class room of size 1365x 680 x750 mm made out of 18 mm thick Pre- laminated board with PVC edges supported on mild steel powder coated of desired colour frame including 3drawer and 2 drwaer on both side, pedestal fixed to the bottom of the table & all hardwares complete as per approved make.

Providing,fabricating and fixing Notice board made of Aluminium frame of size 25x25 mm with sliding shutter of 6mm thick glass fixed in shutter with neoprean beading with aluminium two track rail.The rear of the board shall have 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all aluminium hardwares such as screws, locking arrangement etc. and making arrangement for fixing on wall all complete as per design. 1200 x 900

Providing and placing in position (Library table) table of size 2567x894x750mm high of approved make. Made of 19mm BWP

Providing and placing in position Plastic Moulded (PP) chairs with arms having good edurance, less creep, not brittle. The chairs should be manufactured using virgin materials. The weight of each should not be less than 2330 gms

Providing and placing in News Paper Stand of size (LxWxH) 450x300x1200 mm made out of black finish wire & all hardwares complete as per approved make.

Page 2: tabels

6 SqM 131 17500.00 2292500.00

7 Each 10 0.00

Total 2757700.00ADD:VAT/CST@ 12.5 %

Grand Total

Providing and installing raised Platform with Wooden flooring for class rooms at a height 450 / 300mm above existing floor level as per drawing. Made up of 75mm x 75mm( 2nd class) Matti wood frame at top, bottom and vertical support at 600mm centre to centre both ways duly fixed in floor with dash fastners and screws including 12mm thick BWP marine ply to be fixed on wooden frame at top and sides with screws and 25mm thick 2nd class teakwood planks tongued and grooved flooring fixed on marine ply with iron screws including frenchpolishing on top of floor and wood preservative/blck japan paint on wooden frame and bottom of marine ply complete as per design

Providing and fixing cupboard of size(LxHxW) 900x2100x600mm deep made out of 18mm Pre-laminated particle board of approval shade.

Page 3: tabels