t1 threaded star - process valve solutions · norway, sweden, denmark, netherlands, belgium,...
TRANSCRIPT
T1 THREADED STARFORGED STEEL BALL VALVES
Cat
alog
ue N
°T
1 -
PZ
Z 2
9 -
4.20
01
Your Representative:
SALES ORGANIZATION
STARLINE S.p.A.Via F. Baracca, 30 - 24060 S. PAOLO D’ARGON (Bergamo) ITALY
Phone 035/958041/958102 - Fax 035/958413http: www.starline.it - e-mail: [email protected]
MAIN DISTRIBUTORSNorway, Sweden, Denmark, Netherlands,
Belgium, Switzerland, Austria, Greece,
Usa, Canada, Australia, New Zeland, South Africa,
UAE, Czech Republic, Slowakia,
Singapore, Romania, Oman, Saudi Arabia, Kuwait
®
APPROVAL CERTIFICATE No. 911234
6D-0233 No AW6/0494
STARLINE Armaturen GmbHLange Hecke, 41D-64521 Groß - GerauPhone: +49 - (0)6152 - 987655Fax: +49 - (0)6152 - 987656e-mail: [email protected]
STARLINE VALVES OYMartinkylantie, 3901720 VantaaFinlandPhone: +358 - 98787711Fax: +358 - 98787221
STARLINE BALL VALVES LTDBrunel WayStephenson Industrial EstateCoalville Leicestershire LE67 3HFPhone: +44 - (0)1530 815 818Fax: +44 - (0)1530 815 819e-mail: [email protected]
STARLINE FRANCE7, Parc d’Activitesde la Verdiere13880 VELAUX - FrancePhone: +33 - 442878400Fax: +33 - 442878404
STARLINE IBERICA S.A.Doctor Trueta, 16808005 Barcelona - EspañaPhone: +34 - 93 225 09 07Fax: +34 - 93 225 06 99e-mail: [email protected]: www.starline.es
FLOW DATA The following flow rates were determined for ball valves in fully open position and a water temperature of 60°F (15°C).Kv value is the full capacity flow rate through the ball valve in cubic metres per hour (m3/h) with a pressure drop of 1 bar.Cv value is the full capacity flow rate through the ball valve in gallons/min. of water at 60°F with a pressure drop of 1 psi.
NP NAME PLATE Stainless Steel Stainless Steel Stainless Steel1 HANDLE C.S. Zinc Plated+Plastic C.S. Zinc Plated+Plastic C.S. Zinc Plated+Plastic
•• 2 HANDLE NUT C.S. Zinc Plated Stainless Steel Stainless Steel• 3 PACKING RING Graphite - T - S Graphite - T - S Graphite - T - S•• 4 SPRING WASHER Special S.S. For Springs Special S.S. For Springs Special S.S. For Springs•• 5 STEM S.S. 316 S.S. 316 S.S. 316
6 GLAND PACKING S.S. 316 S.S. 316 S.S. 316• 7 THRUST WASHER Reinforced PTFE Reinforced PTFE Reinforced PTFE• 8 ‘O’ RING STEM Viton Viton Viton•• 9 BALL S.S. 316 S.S. 316 S.S. 316• 10 SEATS T - S - N - D - P T - S - N - D - P T - S - N - D - P• 11 FIRST BODY GASKET Viton Viton Viton
12 BODY ASTM A105N ASTM A350 LF2 ASTM A182 F31613 END CONNECTION ASTM A105N ASTM A305 LF2 ASTM A182 F31614 STOP PIN C.S. Zinc Plated Stainless Steel Stainless Steel
•• 17 STOP WASHER Stainless Steel Stainless Steel Stainless Steel• 18 EMERGENCY BODY SEAL Graphite Graphite Graphite• 19 RING SEAL PTFE - Graphite PTFE - Graphite PTFE - Graphite
1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3”
1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3” 4”
5000 5000 4600 4000 4000 3600 3000 2400 2000 1440
350 350 320 280 280 250 210 168 140 100
2460 2460 2320 2160 1950 1740 1590 1440 1160 870
170 170 160 150 135 120 110 100 80 60
2590 2590 2460 2320 2160 2030 1880 1740 1440 1160
180 180 170 160 150 140 130 120 100 80
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
VALVE
SIZENPT
BSPP
BSPT
DIMENSIONS mm / Inch
A
FLANGEDB.W
P.E.
S.W.
150
RF
300
RF RJ
600
RF RJ
900
RF RJ
1500
RF RJ
B C D E
ISO
5211NPT
BSPP
BSPT
B.W
P.E.
S.W.
FLANGED
WEIGHT KG/LBS
150 300 600 900 1500
8
1/4”
10
3/8”
15
1/2”
20
3/4”
25
1”
32
1.1/4”
40
1.1/2”
50
2”
65
2.1/2”
80
3”
85
3.34
85
3.34
98.5
3.87
108
4.25
118
4.64
137
5.39
150
5.9
158.8
6.25
184
7.24
222
8.74
127
5
127
5
140
5.51
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
-
-
-
-
108
4.25
-
-
127
5
-
-
165
6.5
178
7
-
-
-
-
-
-
-
-
139.7
5.5
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
-
-
-
-
151
5.94
165
6.5
178
7
190.5
7.5
203
8
231.5
9.12
257
10.12
298.2
11.74
-
-
-
-
165
6.5
190.5
7.5
216
8.5
228.5
9
241
9.5
292
11.5
330
13
355.6
14
-
-
-
-
163.5
6.44
190.5
7.5
216
8.5
228.5
9
241
9.5
295
11.5
333
13.12
358.6
14.12
-
-
-
-
216
8.5
229
9
254
10
279.5
11
305
12
368.5
14.5
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
279.5
11
305
12
371.5
14.62
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
-
-
-
-
-
-
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
-
-
-
-
-
-
-
-
-
-
24
0.95
24
0.95
27
1.06
33.5
1.3
38
1.5
43.5
1.7
47.5
1.9
58.5
2.3
70
2.75
88
3.5
67.5
2.65
67.5
2.65
70
2.75
80
3.15
92
3.65
100
3.95
113
4.45
118
4.65
135
5.35
150
4.85
11.1
0.44
11.1
0.44
14.2
0.56
21
0.83
25.4
1
31.7
1.25
38
1.5
49
1.93
63.5
2.5
76
3
152
6
152
6
152
6
193
7.5
193
7.5
225
9
225
9
225
9
360
14
500
20
1
2.2
1
2.2
1.2
2.6
2
4.4
2.7
5.9
3.8
8.4
5.3
11.7
8.5
18.7
14
30.8
23
50.6
1.4
3.1
1.4
3.1
1.6
3.5
2.4
5.3
3.8
8.4
4.9
10.8
6.7
14.7
11.5
25.3
18.3
40.3
29.3
64.5
-
-
-
-
2.8
6.2
-
-
4.9
10.8
-
-
8.9
19.6
13.9
30.6
-
-
-
-
-
-
-
-
3.3
7.3
4.9
10.8
6.5
14.3
9.5
20.9
12.5
27.5
17.5
38.5
25.5
56.1
43.5
95.7
-
-
-
-
4
8.8
5.6
12.3
7.3
16
10.3
22.7
14.5
31.9
19.5
42.9
28.5
62.7
49.5
108.9
-
-
-
-
5.6
12.3
8.4
18.5
10.9
24
13
28.6
19
41.8
31
68.2
-
-
-
-
-
-
-
-
5.6
12.3
8.4
18.5
10.9
24
-
-
-
-
-
-
-
-
-
-
VALVE – 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3” 4”SIZE – 15 20 25 32 40 50 65 80 100Cv 8 13 32 48 82 120 275 460 700KV 6,8 11 27,5 41 70 103 236 394 600
PARTNO
PART NAMEMATERIALS MATERIALS MATERIALSA105 / 316 LF2 / 316 316 / 316
STARLINE Full BoreFigure No. Reduced Bore
FULL BORE
VALV
ESI
ZE
VALV
ESI
ZE
SEAT
MAT
ERIA
L
REDUCED BORE
DEVLON (N) - NYLONDELRIN (D) - PEEK (P)
Virgin PTFE(T)
Reinforced PTFE(S)
PsiBarPsiBarPsiBar
1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3”
1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3” 4”
150 to 1500 150 to 900 150 to 600
150 to 900 150 to 600 150 to 300
150 to 900 150 to 600 150 to 300
FULL BORE
SEAT
MAT
ERIA
L
REDUCED BORE
DEVLON (N) - NYLONDELRIN (D) - PEEK (P)
Virgin PTFE(T)
Reinforced PTFE(S)
CLASS
CLASS
CLASS
FULL BORE
ASME / ANSI CLASS RATING
Ring Seal (19) are not used when seat material are in T - SComplete figure No.:
VALVE 1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3”SIZE 8 10 15 20 25 32 40 50 65 80Cv 8 8 12 30 45 78 115 265 445 680KV 6,8 6,8 10 26 38 67 99 227 381 583
FULL BORE
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
VALVE
SIZENPT
BSPP
BSPT
DIMENSIONS mm / Inch
A
FLANGEDB.W
P.E.
S.W.
150
RF
300
RF RJ
600
RF RJ
900
RF RJ
1500
RF RJ
B C D E
ISO
5211NPT
BSPP
BSPT
B.W
P.E.
S.W.
FLANGED
WEIGHT KG/LBS
150 300 600 900 1500
15
1/2”
20
3/4”
25
1”
32
1.1/4”
40
1.1/2”
50
2”
65
2.1/2”
80
3”
100
4”
85
3.34
98.5
3.87
108
4.25
118
4.64
137
5.39
150
5.9
158.8
6.25
184
7.24
222
8.74
127
5
140
5.51
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
108
4.25
117.5
4.62
127
5
139.7
5.5
165
6.5
178
7
190.5
7.5
203
8
228.5
9
139.7
5.5
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
305
12
151
5.94
165
6.5
178
7
190.5
7.5
203
8
231.5
9.12
257
10.12
298.2
11.74
320.5
12.62
165
6.5
190.5
7.5
216
8.5
228.5
9
241
9.5
292
11.5
330
13
355.6
14
432
17
163.5
6.44
190.5
7.5
216
8.5
228.5
9
241
9.5
295
11.5
333
13.12
358.6
14.12
435
17.12
216
8.5
229
9
254
10
279.5
11
305
12
368.5
14.5
419
16.5
-
-
-
-
216
8.5
229
9
254
10
279.5
11
305
12
371,5
14.62
422
16.62
-
-
-
-
216
8.5
229
9
254
10
279.5
11
-
-
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
279.5
11
-
-
-
-
-
-
-
-
-
-
24
0.95
27
1.06
33.5
1.3
38
1.5
43.5
1.7
47.5
1.9
58.5
2.3
70
2.75
88
3.5
67.5
2.65
70
2.75
80
3.15
92
3.65
100
3.95
113
4.45
118
4.65
135
5.35
150
4.85
11.1
0.44
14.2
0.56
21
0.83
25.4
1
31.7
1.25
38
1.5
49
1.93
63.5
2.5
76
3
152
6
152
6
193
7.5
193
7.5
225
9
225
9
225
9
360
14
500
20
0.9
2
1.1
2.4
1.9
4.2
2.6
5.7
3.7
8.1
5
11
7.5
16.5
12.7
27.9
21.5
47.3
1.3
2.86
1.5
3.3
2.3
5.1
3.6
7.9
4.7
10.3
6.2
13.6
10
22
17
37.4
27.5
60.5
2.6
5.7
3.1
6.8
4.2
9.2
5.4
11.9
7.4
16.3
10.7
23.5
14.7
32.3
21.6
47.5
35
77
3.1
6.8
4
8.8
5.8
12.8
8.4
18.5
11
24.2
14.3
31.5
20
44
34
74.8
44
96.8
3.8
8.4
4.8
10.6
6.6
14.5
9.2
20.2
13
28.6
16.3
35.9
23
50.6
41
90.2
60
132
5.4
12.1
7.6
16.7
10.2
22.4
11
24.2
17.5
38.5
27.8
61.2
40
88
-
-
-
-
5.4
12.1
7.6
16.7
10.2
22.4
11
24.2
-
-
-
-
-
-
-
-
-
-
REDUCED BORE
F03
F03
F04
F04
F05
F05
F05
F07
F07
BSP Parallel: BS21Rp - ISO 228/1 - ISO 7/1RpBSP Taper: BS21Rc -ISO 7/1Rc - DIN 2999/1NPT: ANSI B1 20.1
B.W. - P.E.: ANSI B16.25 Sch. 40 - XS - 80 - 160Note: other overall lenghts are available on request.Instruction for welding the valve on the line:With the valve in open position tack-weld in four pointson both ends and then complete the welding withoutdesmantling the valve.
S.W.: ANSI B16.11Instruction for welding the valve on the line:With the valve in open position tack-weld in four pointson both ends and then complete the welding withoutdesmantling the valve.
FLANGES in according to ASME / ANSI B 16.5FACE to FACE in according to ASME / ANSI B16.10Note: when flanges are RF type of finish must be sta-ted on the order
— — — • —T113Seat
Packing Ring
Emergency Body Seal
First Body Gasket
REDUCED BORE
LOCKING DEVICE UNDERGROUND SERVICEFUGITIVE EMISSION
MAXIMUM WORKING PRESSURE (WOG/CWP)
F03
F03
F03
F04
F04
F05
F05
F05
F07
F07
T 113 — — — • — T 115 — — — • — T 116 — — — • —T 213 — — — • — T 215 — — — • — T 216 — — — • —
CONSTRUCTION - MATERIAL®
DIMENSIONS®
DIFFERENT CONFIGURATION
DESCRIPTIONDESIGN : THREE PIECES SCREWED CONSTRUCTION (SEAL WELDED ON REQUEST)
SOLID BALL - ANTI BLOW OUT PROOF STEM DESIGN - ENCAPSULATED SOFT SEATS - ANTISTATIC DEVICE - ISO 5211 ON THE TOP FOR EASY AUTOMATION FIRE TEST APPROVED.
SIZE : DN 8 ÷ 80 FULL BORE -- DN 15 ÷ 100 REDUCED BORE1/4” ÷ 3” FULL BORE -- 1/2” ÷ 4” REDUCED BORE
CLASS : ASME 150 ÷ 1500 LBS or 870 ÷ 5000 WOG/CWP or PN 16 ÷ 250MATERIAL : ASTM A105 - LF2 - 316 - 316LCONSTRUCTION : ASME B16.34 - BS5351 - API6DMARKING : MSS SP25TEST CERTIFICATE : UNI EN 10204 TYPE 3.1B UNLESS OTHERWISE REQUIREDFIRE TEST APPROVED : BS6755 PART 2, - API607 - API6FASERVICES : FOR PETROLEUM, CHEMICALS, PETROLCHEMICALS,
GAS APPLICATION AND ALLIED INDUSTRIES
• Suggested materials after 2 years service• • Suggested materials after 5 years service
FLOW DATA The following flow rates were determined for ball valves in fully open position and a water temperature of 60°F (15°C).Kv value is the full capacity flow rate through the ball valve in cubic metres per hour (m3/h) with a pressure drop of 1 bar.Cv value is the full capacity flow rate through the ball valve in gallons/min. of water at 60°F with a pressure drop of 1 psi.
NP NAME PLATE Stainless Steel Stainless Steel Stainless Steel1 HANDLE C.S. Zinc Plated+Plastic C.S. Zinc Plated+Plastic C.S. Zinc Plated+Plastic
•• 2 HANDLE NUT C.S. Zinc Plated Stainless Steel Stainless Steel• 3 PACKING RING Graphite - T - S Graphite - T - S Graphite - T - S•• 4 SPRING WASHER Special S.S. For Springs Special S.S. For Springs Special S.S. For Springs•• 5 STEM S.S. 316 S.S. 316 S.S. 316
6 GLAND PACKING S.S. 316 S.S. 316 S.S. 316• 7 THRUST WASHER Reinforced PTFE Reinforced PTFE Reinforced PTFE• 8 ‘O’ RING STEM Viton Viton Viton•• 9 BALL S.S. 316 S.S. 316 S.S. 316• 10 SEATS T - S - N - D - P T - S - N - D - P T - S - N - D - P• 11 FIRST BODY GASKET Viton Viton Viton
12 BODY ASTM A105N ASTM A350 LF2 ASTM A182 F31613 END CONNECTION ASTM A105N ASTM A305 LF2 ASTM A182 F31614 STOP PIN C.S. Zinc Plated Stainless Steel Stainless Steel
•• 17 STOP WASHER Stainless Steel Stainless Steel Stainless Steel• 18 EMERGENCY BODY SEAL Graphite Graphite Graphite• 19 RING SEAL PTFE - Graphite PTFE - Graphite PTFE - Graphite
1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3”
1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3” 4”
5000 5000 4600 4000 4000 3600 3000 2400 2000 1440
350 350 320 280 280 250 210 168 140 100
2460 2460 2320 2160 1950 1740 1590 1440 1160 870
170 170 160 150 135 120 110 100 80 60
2590 2590 2460 2320 2160 2030 1880 1740 1440 1160
180 180 170 160 150 140 130 120 100 80
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
VALVE
SIZENPT
BSPP
BSPT
DIMENSIONS mm / Inch
A
FLANGEDB.W
P.E.
S.W.
150
RF
300
RF RJ
600
RF RJ
900
RF RJ
1500
RF RJ
B C D E
ISO
5211NPT
BSPP
BSPT
B.W
P.E.
S.W.
FLANGED
WEIGHT KG/LBS
150 300 600 900 1500
8
1/4”
10
3/8”
15
1/2”
20
3/4”
25
1”
32
1.1/4”
40
1.1/2”
50
2”
65
2.1/2”
80
3”
85
3.34
85
3.34
98.5
3.87
108
4.25
118
4.64
137
5.39
150
5.9
158.8
6.25
184
7.24
222
8.74
127
5
127
5
140
5.51
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
-
-
-
-
108
4.25
-
-
127
5
-
-
165
6.5
178
7
-
-
-
-
-
-
-
-
139.7
5.5
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
-
-
-
-
151
5.94
165
6.5
178
7
190.5
7.5
203
8
231.5
9.12
257
10.12
298.2
11.74
-
-
-
-
165
6.5
190.5
7.5
216
8.5
228.5
9
241
9.5
292
11.5
330
13
355.6
14
-
-
-
-
163.5
6.44
190.5
7.5
216
8.5
228.5
9
241
9.5
295
11.5
333
13.12
358.6
14.12
-
-
-
-
216
8.5
229
9
254
10
279.5
11
305
12
368.5
14.5
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
279.5
11
305
12
371.5
14.62
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
-
-
-
-
-
-
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
-
-
-
-
-
-
-
-
-
-
24
0.95
24
0.95
27
1.06
33.5
1.3
38
1.5
43.5
1.7
47.5
1.9
58.5
2.3
70
2.75
88
3.5
67.5
2.65
67.5
2.65
70
2.75
80
3.15
92
3.65
100
3.95
113
4.45
118
4.65
135
5.35
150
4.85
11.1
0.44
11.1
0.44
14.2
0.56
21
0.83
25.4
1
31.7
1.25
38
1.5
49
1.93
63.5
2.5
76
3
152
6
152
6
152
6
193
7.5
193
7.5
225
9
225
9
225
9
360
14
500
20
1
2.2
1
2.2
1.2
2.6
2
4.4
2.7
5.9
3.8
8.4
5.3
11.7
8.5
18.7
14
30.8
23
50.6
1.4
3.1
1.4
3.1
1.6
3.5
2.4
5.3
3.8
8.4
4.9
10.8
6.7
14.7
11.5
25.3
18.3
40.3
29.3
64.5
-
-
-
-
2.8
6.2
-
-
4.9
10.8
-
-
8.9
19.6
13.9
30.6
-
-
-
-
-
-
-
-
3.3
7.3
4.9
10.8
6.5
14.3
9.5
20.9
12.5
27.5
17.5
38.5
25.5
56.1
43.5
95.7
-
-
-
-
4
8.8
5.6
12.3
7.3
16
10.3
22.7
14.5
31.9
19.5
42.9
28.5
62.7
49.5
108.9
-
-
-
-
5.6
12.3
8.4
18.5
10.9
24
13
28.6
19
41.8
31
68.2
-
-
-
-
-
-
-
-
5.6
12.3
8.4
18.5
10.9
24
-
-
-
-
-
-
-
-
-
-
VALVE – 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3” 4”SIZE – 15 20 25 32 40 50 65 80 100Cv 8 13 32 48 82 120 275 460 700KV 6,8 11 27,5 41 70 103 236 394 600
PARTNO
PART NAMEMATERIALS MATERIALS MATERIALSA105 / 316 LF2 / 316 316 / 316
STARLINE Full BoreFigure No. Reduced Bore
FULL BORE
VALV
ESI
ZE
VALV
ESI
ZE
SEAT
MAT
ERIA
L
REDUCED BORE
DEVLON (N) - NYLONDELRIN (D) - PEEK (P)
Virgin PTFE(T)
Reinforced PTFE(S)
PsiBarPsiBarPsiBar
1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3”
1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3” 4”
150 to 1500 150 to 900 150 to 600
150 to 900 150 to 600 150 to 300
150 to 900 150 to 600 150 to 300
FULL BORE
SEAT
MAT
ERIA
L
REDUCED BORE
DEVLON (N) - NYLONDELRIN (D) - PEEK (P)
Virgin PTFE(T)
Reinforced PTFE(S)
CLASS
CLASS
CLASS
FULL BORE
ASME / ANSI CLASS RATING
Ring Seal (19) are not used when seat material are in T - SComplete figure No.:
VALVE 1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2” 2” 2.1/2” 3”SIZE 8 10 15 20 25 32 40 50 65 80Cv 8 8 12 30 45 78 115 265 445 680KV 6,8 6,8 10 26 38 67 99 227 381 583
FULL BORE
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
mm
Inch
VALVE
SIZENPT
BSPP
BSPT
DIMENSIONS mm / Inch
A
FLANGEDB.W
P.E.
S.W.
150
RF
300
RF RJ
600
RF RJ
900
RF RJ
1500
RF RJ
B C D E
ISO
5211NPT
BSPP
BSPT
B.W
P.E.
S.W.
FLANGED
WEIGHT KG/LBS
150 300 600 900 1500
15
1/2”
20
3/4”
25
1”
32
1.1/4”
40
1.1/2”
50
2”
65
2.1/2”
80
3”
100
4”
85
3.34
98.5
3.87
108
4.25
118
4.64
137
5.39
150
5.9
158.8
6.25
184
7.24
222
8.74
127
5
140
5.51
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
108
4.25
117.5
4.62
127
5
139.7
5.5
165
6.5
178
7
190.5
7.5
203
8
228.5
9
139.7
5.5
152.5
6
165
6.5
178
7
190.5
7.5
216
8.5
241
9.5
282.5
11.12
305
12
151
5.94
165
6.5
178
7
190.5
7.5
203
8
231.5
9.12
257
10.12
298.2
11.74
320.5
12.62
165
6.5
190.5
7.5
216
8.5
228.5
9
241
9.5
292
11.5
330
13
355.6
14
432
17
163.5
6.44
190.5
7.5
216
8.5
228.5
9
241
9.5
295
11.5
333
13.12
358.6
14.12
435
17.12
216
8.5
229
9
254
10
279.5
11
305
12
368.5
14.5
419
16.5
-
-
-
-
216
8.5
229
9
254
10
279.5
11
305
12
371,5
14.62
422
16.62
-
-
-
-
216
8.5
229
9
254
10
279.5
11
-
-
-
-
-
-
-
-
-
-
216
8.5
229
9
254
10
279.5
11
-
-
-
-
-
-
-
-
-
-
24
0.95
27
1.06
33.5
1.3
38
1.5
43.5
1.7
47.5
1.9
58.5
2.3
70
2.75
88
3.5
67.5
2.65
70
2.75
80
3.15
92
3.65
100
3.95
113
4.45
118
4.65
135
5.35
150
4.85
11.1
0.44
14.2
0.56
21
0.83
25.4
1
31.7
1.25
38
1.5
49
1.93
63.5
2.5
76
3
152
6
152
6
193
7.5
193
7.5
225
9
225
9
225
9
360
14
500
20
0.9
2
1.1
2.4
1.9
4.2
2.6
5.7
3.7
8.1
5
11
7.5
16.5
12.7
27.9
21.5
47.3
1.3
2.86
1.5
3.3
2.3
5.1
3.6
7.9
4.7
10.3
6.2
13.6
10
22
17
37.4
27.5
60.5
2.6
5.7
3.1
6.8
4.2
9.2
5.4
11.9
7.4
16.3
10.7
23.5
14.7
32.3
21.6
47.5
35
77
3.1
6.8
4
8.8
5.8
12.8
8.4
18.5
11
24.2
14.3
31.5
20
44
34
74.8
44
96.8
3.8
8.4
4.8
10.6
6.6
14.5
9.2
20.2
13
28.6
16.3
35.9
23
50.6
41
90.2
60
132
5.4
12.1
7.6
16.7
10.2
22.4
11
24.2
17.5
38.5
27.8
61.2
40
88
-
-
-
-
5.4
12.1
7.6
16.7
10.2
22.4
11
24.2
-
-
-
-
-
-
-
-
-
-
REDUCED BORE
F03
F03
F04
F04
F05
F05
F05
F07
F07
BSP Parallel: BS21Rp - ISO 228/1 - ISO 7/1RpBSP Taper: BS21Rc -ISO 7/1Rc - DIN 2999/1NPT: ANSI B1 20.1
B.W. - P.E.: ANSI B16.25 Sch. 40 - XS - 80 - 160Note: other overall lenghts are available on request.Instruction for welding the valve on the line:With the valve in open position tack-weld in four pointson both ends and then complete the welding withoutdesmantling the valve.
S.W.: ANSI B16.11Instruction for welding the valve on the line:With the valve in open position tack-weld in four pointson both ends and then complete the welding withoutdesmantling the valve.
FLANGES in according to ASME / ANSI B 16.5FACE to FACE in according to ASME / ANSI B16.10Note: when flanges are RF type of finish must be sta-ted on the order
— — — • —T113Seat
Packing Ring
Emergency Body Seal
First Body Gasket
REDUCED BORE
LOCKING DEVICE UNDERGROUND SERVICEFUGITIVE EMISSION
MAXIMUM WORKING PRESSURE (WOG/CWP)
F03
F03
F03
F04
F04
F05
F05
F05
F07
F07
T 113 — — — • — T 115 — — — • — T 116 — — — • —T 213 — — — • — T 215 — — — • — T 216 — — — • —
CONSTRUCTION - MATERIAL®
DIMENSIONS®
DIFFERENT CONFIGURATION
DESCRIPTIONDESIGN : THREE PIECES SCREWED CONSTRUCTION (SEAL WELDED ON REQUEST)
SOLID BALL - ANTI BLOW OUT PROOF STEM DESIGN - ENCAPSULATED SOFT SEATS - ANTISTATIC DEVICE - ISO 5211 ON THE TOP FOR EASY AUTOMATION FIRE TEST APPROVED.
SIZE : DN 8 ÷ 80 FULL BORE -- DN 15 ÷ 100 REDUCED BORE1/4” ÷ 3” FULL BORE -- 1/2” ÷ 4” REDUCED BORE
CLASS : ASME 150 ÷ 1500 LBS or 870 ÷ 5000 WOG/CWP or PN 16 ÷ 250MATERIAL : ASTM A105 - LF2 - 316 - 316LCONSTRUCTION : ASME B16.34 - BS5351 - API6DMARKING : MSS SP25TEST CERTIFICATE : UNI EN 10204 TYPE 3.1B UNLESS OTHERWISE REQUIREDFIRE TEST APPROVED : BS6755 PART 2, - API607 - API6FASERVICES : FOR PETROLEUM, CHEMICALS, PETROLCHEMICALS,
GAS APPLICATION AND ALLIED INDUSTRIES
• Suggested materials after 2 years service• • Suggested materials after 5 years service
2 STANDARDFORGED STEEL BALL VALVES
Cat
alog
ue N
°2
- P
ZZ
4 -
9.2
003
®
TECHNICAL DATA®
6D-0233MAC/10699/2/TO/99P-8871
VALVE – 1/2” 3/4” 1” 1.1/4” 1.1/2” 2”SIZE – 15 20 25 32 40 50Cv 8 13 32 48 82 120KV 6,8 11 27,5 41 70 103
The following flow rates were determined for ball valves in fully open position and a water temperature of 60°F (15°C).Kv value is the full capacity flow rate through the ball valve in cubic metres per hour (m3/h) with a pressure drop of 1 bar.Cv value is the full capacity flow rate through the ball valve in gallons/min. of water at 60°F with a pressure drop of 1 psi.
1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2”
1/2” 3/4” 1” 1.1/4” 1.1/2” 2”
2580 2580 2580 2320 2320 2060 2060
178 178 178 160 160 142 142
2350 2350 2350 2030 2030 1860 1860
162 162 162 140 140 128 128
2250 2250 2250 2000 2000 1800 1800
155 155 155 138 138 124 124
FULL BORE
VALV
ESI
ZEVA
LVE
SIZE
SEAT
MAT
ERIA
L
REDUCED BORE
Reinforced PTFE(S-B)
Reinforced PTFE(R)
Virgin PTFE(T)
PsiBarPsiBarPsiBar
1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2”
1/2” 3/4” 1” 1.1/4” 1.1/2” 2”
FULL BORE
SEAT
MAT
ERIA
L
REDUCED BORE
Reinforced PTFE(S-B)
Reinforced PTFE(R)
Virgin PTFE(T)
150 ÷ 800
150 ÷ 600150 ÷ 800
150 ÷ 600150 ÷ 800
CLASS RATING
SEAT MATERIALS
VALVE 1/4” 3/8” 1/2” 3/4” 1” 1.1/4” 1.1/2”SIZE 8 10 15 20 25 32 40Cv 8 8 12 30 45 78 115KV 6,8 6,8 10 26 38 67 99
FULL BOREREDUCED BORE
MAXIMUM WORKING PRESSURE (WOG/CWP)
“T” = PTFE Virgin
“R” = PTFE + 15% Fiberglass
“S” = PTFE + 20% C. 5% Graphite
“B” = PTFE +60% Bronze
S-B 1/4" to 1/2" F.B. 1/2" to 3/4" R.B.
R 1/4" to 1/2" F.B. 1/2" to 3/4" R.B.
T 1/4" to 1/2" F.B. 1/2" to 3/4" R.B.
S-B 3/4" to 1" F.B. 1" to 1.1/4 R.B.
R 3/4" to 1" F.B. 1" to 1.1/4 R.B.
T 3/4" to 1" F.B. 1" to 1.1/4" R.B.
S-B 1.1/4" to 1.1/2" F.B. 1.1/2 to 2" R.B.
R 1.1/4" to 1.1/2" F.B. 1.1/2" to 2" R.B.
T 1.1/4" to 1.1/2" F.B. 1.1/2" to 2" R.B.
+°C
+°F
DESCRIPTIONCONSTRUCTION : THREE PIECES BOLTED CONSTRUCTION - SOLID BALL - ANTI BLOW OUT PROOF STEM DESIGN
SOFT SEATS - ANTISTATIC DEVICE - ISO 5211 ON THE TOP FOR EASY AUTOMATION.SIZE : DN 8 ÷ 40 FULL BORE -- DN 15 ÷ 50 REDUCED BORE
1/4” ÷ 1.1/2” FULL BORE -- 1/2” ÷ 2” REDUCED BORECLASS : PN 16 ÷ 100 or ASME 150 ÷ 800 LBS or 1000 ÷ 2000 WOGTEMPERATURE : -100°C UP TO + 260°CMATERIAL : ASTM A105 - 316 - 316LDESIGN : ASME B16.34 - ASME B31.1 - BS5351 - P.E.D. 97/23/EC - ATEX 94/9 CEMARKING : MSS SP25CE 0038 : ACCORDING TO DIRECTIVE 97/23/CE - MODULE H CATEGORY III - NOTIFIED BODY LLOYD’S REGISTERED
CERTIFICATE NR. RPS 01060304/01Ex IM2/II 2GD : ACCORDING TO ATEX 94/9 CE - TECHNICAL FILE NR. ST01 ATEXTEST CERTIFICATE : UNI EN 10204 TYPE 3.1B UNLESS OTHERWISE REQUIREDSERVICES : FOR GENERAL SERVICES AND CHEMICAL INDUSTRIES
PRESSURE/TEMPERATURE LIMITATIONS OF SEAT SEAL
FLOW DATA
APPROVAL CERTIFICATE No. LRC 160047
Certificate N°: RPS 0160304/01
PED 97/23 EC
Tech. File N° ST01 ATEX
ATEX 94/9 CE
0038
Your Representative:
SALES ORGANIZATION
STARLINE S.p.A.Via F. Baracca, 30 - 24060 S. PAOLO D’ARGON (Bergamo) ITALY
Phone: 0039 035/958041/958102 - Fax: 0039 035/958413http: www.starline.it - e-mail: [email protected]
MAIN DISTRIBUTORSNorway, Sweden, Denmark, Netherlands,
Belgium, Switzerland, Austria, Greece,
Brasil, Usa, Canada, Australia, New Zeland, South Africa,
UAE, Czech Republic, Slowakia, Poland
Singapore, Romania, Oman, Saudi Arabia, Kuwait
®
STARLINE Armaturen GmbHIndustriestrasse, 2564569 Nauheim - GermanyPhone: 0049 (0)6152987655Fax: 0049 (0)6152987656e-mail: [email protected]
STARLINE VALVES OYMartinkyläntie, 3901720 Vantaa - FinlandPhone: 0035 (0)898787711Fax: 0035 (0)898787221http: www.starline.fie-mail: [email protected]
STARLINE FRANCE7, Parc d’Activitésde la Verdière 113880 VELAUX - FrancePhone: 0033 (0)442878400Fax: 0033 (0)442878404http: www.star-line.fre-mail: [email protected]
STARLINE IBERICA S.A.Poligono Industrial El CircuitC/Rec Del Molinar F-308160 Montmelò Barcelona - SpainPhone: 0034 (0)935799370Fax: 0034 (0)935799244http: www.starline.ese-mail: [email protected]
STARLINE BALL VALVES LTDTelford Way Stephenson Ind. Est.Coalville Leicestershire LE 67 3HEGreat BritainPhone: 0044 (0)1530815818Fax: 0044 (0)1530815819http: www.acvalvealliance.come-mail: [email protected]