t-weddingbear-groom i e ltr
TRANSCRIPT
-
7/29/2019 T-weddingbear-groom i e Ltr
1/7
A1
Make a mountain fold on A1.Trace along the mountain fold line with a pencil, scoring it tomake it easier to fold.
Notation Key
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
RulerA1, B1
Scissors lin
Triangular glue tab
Glue spot Parts No.
Parts name
Glue down the glue
tabs one at a timein turn.
Cut a slot right in
to the apex of thetriangular glue tab.
A1
A1
A1
A1A1
Wedding Bear BridegroomWedding Bear Bridegroom
Tools
Cut out A1 by cutting along the lines.
Cut along the line marked .
Assemble the headA
Using the photo as a guide, apply pressure with the palm of your hand,gradually curling the paper in the direction of the arrow.
The parts will be easier to assemble if curled.
The Assembly instructions are divided into seven blocks:
A (head), B (body), C (legs), D (tail coat), E (arm), F (silk hat),and G (message board).
Follow the instructions for each block to assemble your teddy
bear.
marks a basic assembly technique that remains the same
regardless of the part. Instructions are printed only for the first
instance.
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Attach the triangular glue tabs so that the front side becomes convex.Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.
Wedding Bear Bridegroom : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Scissors line
Mountain fold
Valley fold
Glue spot
Glue reverse side
Parts No.
Use pattern: Page2 / Page3.
Page
-
7/29/2019 T-weddingbear-groom i e Ltr
2/7
Assemble A4 and attach it to A5.
Assemble A6 and A7 in the same way, and attach the ears
to the head.
Assemble A8, and attach to the head. Assemble A9.
Attach B1 and B2 together.
Cut out A2 and A3, curl them and glue the triangular
glue tabs, attaching each to A1.
B2
A1
A8
A8
A2
A9
A9A9
A9
A3
A3 A2
A1A1
A4
A4
A4
A6
A5
A5
A3
A2
A1A5
A6A7
A7
A4
B1
B1
B2
Glue together the remaining glue spots.
A2 Head
A2
A2
A2
Wedding Bear Bridegroom : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
*Note: The completed A9 will be attached in the last step.
Assemble the body
Use pattern: Page4 / Page5.B
Page
-
7/29/2019 T-weddingbear-groom i e Ltr
3/7
Attach B4 and B5, then attach B3 and B6.
Attach B1, B2 to B4, B5.
Assemble B7.
B4
B3B5
B4
B5
B4
B6B5
B4
B5
B5
B3
B1
B7B7
Assemble B4, B5 and B7.
B7
B7
B4
B4
B5
Attach B8, B9 to B4.
B9
B4
B9
B5
B8
Attach B10, B11 and B12 and attach it to B6.
B10
B10
B11
B11
B12
B12
B6
B2
B2
B4
B1Return B1 to its original position.
B2
B1
B3
B4
B8B9
B5
*Note: The completed head will be fitted in a later step.
Wedding Bear Bridegroom : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
-
7/29/2019 T-weddingbear-groom i e Ltr
4/7
Wedding Bear Bridegroom : Assembly Instructions
Assemble C2 through C8.
C2 C3
C4
C6
C7C8
C5
Attach C1 through C8 together.
Assemble C9 through C16 in the same way.
Attach the legs to the body that you made earlier.
C1
C2C3
C2 C4
C6
C6
C5
C7
C9 C10 C11
C12
C13
C14
C15 C16
C7C7
C7C15
B7
B7C8
C5
C4
Assemble the legs
Use pattern: Page6 / Page7.C
C3
C7
C8
C8
Leave the protruding part out.
Return C8to its originalposition.
Match up this part.
Match up the glue spots.
C8
Fit the head to the body, and attach A9 to complete the legs.
B1
B1
A9Return B1 to its original position.
Do not put glue onthe protruding parts.
Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
-
7/29/2019 T-weddingbear-groom i e Ltr
5/7
Assemble D3 and attach it to D4.
Assemble D5 and D6 in the same way, and attach D3 and
D5 together.
Assemble D1, D2, D3 and D5, to complete the tail coat.
Attach D1 and D2 together.
D2
D1
D3
D3 D5
D4
D6
D4
D3
D3
D5
Assemble the tail coat
Use pattern: Page9 / Page10.EAssemble E1 through E9.
E1
E2
E3
E4
E6E5
E7
E8
E9
D2
D5
D3
D1
D4
D6
Wedding Bear Bridegroom : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Use pattern: Page8.D
Assemble the arm
Page
-
7/29/2019 T-weddingbear-groom i e Ltr
6/7
Wedding Bear Bridegroom : Assembly Instructions
Attach E1 through E8 together.
E9 E9
E17 E8
E8
E8
E9
E1
E2
E2
E5
E3
E4
E5
E5
Assemble E10 through E18 in the same way.
E10
E13
E11
E12
E14
E15
Fit both arms to the completed tail coat.
Put on the tail coat, to complete the arms section.
Do not put glue on the protruding parts.
Leave the protruding part out.
Return E9 to its
original position.
E16
E17
E18
E4
E1E2
E3
E6
E4
E6
E7
E7
E9
E8
E8
Page
Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
-
7/29/2019 T-weddingbear-groom i e Ltr
7/7
Wedding Bear Bridegroom : Assembly Instructions
Assemble F2 and attach it to F1.
Attach F3 and F4 and attach it to F2.
Put the hat on Teddys head and that completes thetop hat assembly.
F2 F1
F2
F3
F4
F2
F4
F3
Assemble the silk hat
Use pattern: Page11.F
Choose a message for G1 and stick it on.
Attach G8, G9, G10 to G7 and attach it to G6.
Assemble G2, G3, G4 and G5 and attach it to G1.
Next, stick on G6.
G1
Message
G1
G6
G2
G5
G4
G2G3
Assemble the message board
Use pattern: Page12.G
G9
G8
G8
G10
G7
G6
G7
G7
Assemble G11 and attach it to G1 to complete.
G11
G11
G1
* If writing your own message, please write it on G1.This explanation refers to the attached messages.
Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page