t series standard cylinder special order items 8 ...pnematicusa.com/pcmaster.pdft series standard...
TRANSCRIPT
T SERIES STANDARD CYLINDER
T B C
32~200mm
0~2000mm
B: Standard CylinderD: Double-shaft ,model No. is TDCA: Double-shaft and adjustable stroke typeS: Swinging type
S
T: Tie-Rod Standard CylinderX: X-Type Standard Cylinder
TBC 50X80
TBC 80X125-TS
TAC 63X125
XBC 80X125
Internal construction
Product Features◎Lubrication-free
With self lubricating bearing, the lubrication of plunger rod is not needed.
◎Buffer Performance
In addition to fixed buffer, the cylinder end is also provided with adjustable buffer, so that smooth changeover
ensured and no impact is caused.
◎With magnetic element
A permanent magnet is mounted on the cylinder plunger, and it is used to actuate the magnetic switchmounted
on the cylinder to detect the acting position of the cylinder.
◎No magnet
Fitting Type
W
W
Basic type TY TI TF TB
Specifications
**Bore≥125mm, the dimension is the same as ISO6431 Tie-Rod cylinder.
( )
( )
( )
(Kgf/cm2)
(Kgf/cm2)
Cushion type Cushion
Cushion
Bore x stroke
Blank: No magnet
S: magnet
Fixed type:
Blank: basic type
TLB type: front and back fixed type
TFA type: front cover fixed type (flange type)
TFB type: back cover fixed type (flange type)
TCA type: back cover fixed type one-humped type
TCB type: back cover fixed type two-humped type
TTC type: swinging type
TTC-M type: swinging type attaching foot seat
Fitting type: Blank: basic typeTY: Y fittingTI: I fittingTF: Floating fittingTB: Bearing fitting
Piston Nut
Head Cap Seal
Head Cap
O-Ring / Cylinder Body End Seals
Piston
Cylinder Body
Adjustable Cushion Needle Valves
Screw
Fastener-Tie Bolt
Piston Rod
Rod Bearing / Bushing
O-Ring/ Buffer
O-Ring / Piston Seal
Wear Ring
O-Ring/ Buffer Anti-leakage seal
End Cap
Fastener-Tie bolt nut
Rod / Wiper Seal
Item No. Item No.Designation Designation
Special Order Items 8 Weeks Delivery
Components Material
Standard dimensions
oth changeover is
chmounted
2-Cushion Nut
4 Width
e
tinging
seal
Cylinder Diameter
Cylinder Body
Piston
Piston Rod
Head Cap Seal
O-Ring / Piston Seal
O-Ring / Cylinder Body End Seals
Rod / Wiper Seal
Anti-Leaking O-Ring
Rod Bearing / Bushing
Head Cap
End Cap
Magnet
Aluminum Alloy
Hard Chrome Plated Carbon Steel1
Hard Anodized Aluminum Lightweight Cylinder Body:
Black Anodized Aluminum Alloy Blocks.
Black Anodized Aluminum Alloy Blocks.
Plastic Coated Magnetic Material
*The dimension of the magnet model and non-magnet model is the same
Sintered Bronze Metal with PTFE Coating on the ID
Bracket
Bracket
Bracket
Bracket
Bracket
Bracket
Base
Screw
Fastener-Tie Bolt
Fastener-Tie bolt nut
Wear Ring
Buffer Screw
Carbon Steel
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Medium Carbon Steel
Carbon Steel
Carbon Steel
6+ MoS2
Brass
Cylinder Diameter
Diameter / Sign
Diameter / Sign
8-L-deep(M)
A+Stroke
C+Stroke
VBC 40X150X-Type Series cylinder
LBC 32X100Tie-Rod Series cylinder
32~200mm
0~3000mm
SV B C
According to ISO6431、VDMA24562 and DIN24335 Standard V: Standard X-Type CylinderL: Standard Tie-Rod Cylinder
◎Lubrication-free
With self lubricating bearing, the lubrication of plunger rod is not needed.
◎Buffer Performance
In addition to fixed buffer, the cylinder end is also provided with adjustable buffer, so that smooth changeover is ensured and no
impact is caused.
◎With magnetic element
A permanent magnet is mounted on the cylinder plunger, and it is used to actuate the magnetic switchmounted on the cylinder to
detect the acting position of the cylinder.
03
VDMA 24562 ISO6431 V Series Cylinder
B: Standard CylinderD: Double-shaft ,model No. is VDCA: Double-shaft and adjustable stroke typeS: Swinging type
Bore x stroke
Blank: No magnetS: magnet
Fixed type:Blank: basic type VLB type: front and back fixed typeVFA type: front cover fixed type (flange type)VFB type: back cover fixed type (flange type)VCA type: back cover fixed type one-humped typeVCB type: back cover fixed type two-humped type VTC type: swinging typeVTC-M type: swinging type attaching foot seat
Fitting type: Blank: basic typeVY: Y fittingVI: I fittingVF: Floating fittingVB: Bearing fitting
Internal construction
Product Features
◎No magnet
Specifications
Cylinder Diameter(mm)
Acting Mode
Working Medium
Fitting Type
Fixture type
Range of working pressure (Kgf/cm2)
Guaranteed withstanding pressure (Kgf/cm2)
Range of working temperature (℃)
Speed range (mm/s)
Buffer type
Buffer stroke (mm)
Joint Size(mm)
Basic type TY TI TF TB
Cushion
Piston Nut
Head Cap Seal
Self Lubricating bearing
O-Ring/ Buffer
Cylinder Body
Wear Ring
O-Ring / Piston Seal
Buffer
End Cap
Designation Designation
Piston Rod
O-Ring
Head Cap
O-Ring/ Buffer
Piston
Magnet
O-Ring / Cylinder Body End Seals
Screw
Item No. Item No.
Special order 8 Weeks Delivery
ensured and no
cylinder to
3 04
g
Components Material
Standard dimensions
Cylinder Diameter
Cylinder Body
Piston
Piston Rod
Head Cap Seal
Rod / Wiper Seal
O-Ring/ Buffer Bady Seal
O-Ring / Piston Seal
O-Ring / Cylinder Body End Seals
O-Ring/ Buffer
Aluminum Alloy
Hard Chrome Plated Carbon Steel1
Hard Anodized Aluminum Lightweight Cylinder Body:
Cylinder Diameter
O-Ring/ Anti-leakage seal
Wear Ring
Self lubricating bearing
Head Cap
End Cap
Magnet
Buffer
Buffer
Buffer Screw
Black Anodized Aluminum Alloy Blocks.
Black Anodized Aluminum Alloy Blocks.
Plastic Coated Magnetic Material
Broze
Medium Carbon Steel
Brass
A+Stroke
C+Stroke
2-Buffer Nut
4 Width
Diameter / Sign
Diameter / Sign
*The dimension of the magnet model and non-magnet model is the same
Cylinder Diameter(mm)
Acting Mode
Working Medium
Fixture type
Fitting Type
Range of working pressure (Kgf/cm2)
Guaranteed withstanding pressure (Kgf/cm2)
Range of working temperature (℃)
Speed range (mm/s)
Buffer type
Buffer stroke (mm)
Joint Size(mm)
FVFA FVFB FVCA FVCB FVLB FVTC FVTC-M
FTY FTI FTF FVB
Square Type cylinder
Specifications
Mounting Dimensions
Bore
FESTO AppearanceAccording to ISO6431、VDMA24562 and DIN24335 StandardSquare tube
B: Standard CylinderD: Double-shaft ,model No. is FVDC A: Double-shaft and adjustable stroke typeS: Swinging type
Bore x stroke
Blank: No magnet S: magnet
Fixed type: Blank: basic typeFVLB type: front and back fixed typeFVFA type: front cover fixed type (flange type) FVFB type: back cover fixed type (flange type) FVCA type: back cover fixed type one-humped typeFVCB type: back cover fixed type two-humped typeFVTC type: swinging typeFVTC-M type: swinging type attaching foot seat
Fitting type: Blank: basic typeFVY: Y fittingFVI: I fittingFVF: Floating fittingFVB: Bearing fitting
Series Cylinder
Adjustable
Special Order 8Wks Del.
FXB
C 32x80 Cylinder Diameter(mm)
Acting Mode
Working Medium
Fixture type
Fitting Type
Range of working pressure (Kgf/cm2)
Guaranteed withstanding pressure (Kgf/cm2)
Range of working temperature (℃)
Speed range (mm/s)
Buffer type
Buffer stroke (mm)
Joint Size(mm)
FVFA FVFB FVCA FVCB FVLB FVTC FVTC-M
FTY FTI FTF FVB
X-Type Series cylinderFXBC 32X80
Specifications
Mounting Dimensions
Bore
FESTO AppearanceAccording to ISO6431、VDMA24562 and DIN24335 Standard
B: Standard CylinderD: Double-shaft ,model No. is FXDC A: Double-shaft and adjustable stroke typeS: Swinging type
Bore x stroke
Blank: No magnet S: magnet Fixed type:
Blank: basic typeFXLB type: front and back fixed typeFXFA type: front cover fixed type (flange type) FXFB type: back cover fixed type (flange type) FXCA type: back cover fixed type one-humped typeFXCB type: back cover fixed type two-humped typeFXTC type: swinging typeFXTC-M type: swinging type attaching foot seat
Fitting type: Blank: basic typeFXY: Y fittingFXI: I fittingFXF: Floating fittingFXB: Bearing fitting
Series Cylinder
Hot!
Special Order 8Wks Del.
RFA RSDB RLB
Specifications
RAL Mounting Dimensions
R: Mini Type L: aluminum barrel S: stainless steel barrel
A: standard cylinder D: double-shaft type J: double-shaft and adjustable stroke typeSA: spring extent SB: spring returnAC: adjustable cushion type
Blank: Swiveling tailU: Flat tailCM: Round tail
Bore x stroke
Fixed type: Blank: basic typeRLB type: front and back fixed type RFA: front cover fixed typeRSDB: back cover swinging type
Blank: No magnetS: magnet
R Series Aluminum Alloy and Stainless Steel mini cylinder
◎Lubrication-free
With self lubricating bearing, the lubrication of plunger rod is not needed.
◎Buffer Performance
In addition to fixed buffer, the cylinder end is also provided with adjustable buffer, so that smooth
changeover is ensured and no impact is caused.
◎With magnetic element
A permanent magnet is mounted on the cylinder plunger, and it is used to actuate the magnetic
switchmounted on the cylinder to detect the acting position of the cylinder.
※Product Features
Cylinder Diameter(mm) Acting ModeWorking MediumFixture typeRange of working pressure (Kgf/cm2)Guaranteed withstanding pressure (Kgf/cm2)Range of working temperature (℃)
Speed range (mm/s)
Buffer typeStandard TypeCushion Type
Joint Size(mm)
Basic type Basic type
Model with swiveling tail
Model with round tail
Model with flat tail
A+StrokeC+Stroke
A+StrokeC+Stroke
C+StrokeA2+Stroke
Diameter /Sign
Diameter /Sign
07
(Optional)
Special Order 8 Weeks Delivery
that smooth
tic
RAS Internal construction◎No magnet
RAL Standard dimensions
Model with swiveling tail
Model with flat tail
Diameter /Sign
Diameter /Sign
*There is to MAC impulse model for this type.
Item No. Item No.Designation DesignationPiston NutHead Cap SealPiston Nut Head CapStainless steel tubePistonMagnetWear RingOut Rexagen nut
Piston RodRod Bearing / BushingHead Cap Anti-bump cushionO-Ring / Piston SealMagnet Base 后垫华司
End Cap
A+Stroke
A1+Stroke
C+Stroke
C+Stroke
Buffer Screw(optional)
Buffer Screw(optional)
08
IAS 20X50
IAS 20X50
L: aluminum barrelS: stainless steel barrel
A: standard cylinder D: double-shaft typeJ: double-shaft and adjustable stroke typeSA: spring extent SB: spring returnAC: adjustable cushion
S
I: According to ISO6432 and CETOP RP52P Standard
8~25mm
0~1000mm
I A L
Blank: No magnetS: magnet
Fixed type: Blank: basic typeILB type: front and back fixed typeIFA: front cover fixed type ISDB: back cover swinging type
Internal construction
09
PTFE Seal Material
Adjustable air cushion
ISO 6432 I SERIES MINI CYLINDER
Bore x stroke
Piston Rod
Front End Cover
Screw Cut
Cushion gasket
O-ring
Piston
Screw Nut
Dust-proof Ring
Barrel
Y Type-Ring
Back End Cover
DesignationDesignationItem No. Item No.
Specifications
Blank: Swiveling tailU: Flat tailCM: Round tail
Special Order 8 Weeks DeliveryIAS 20X50
IAS 20X50
IAS 20X50
10
ISO6432 Standard dimensions
Piston Nut
Dust-proof Ring
Bearing
O-ring
O-ring
Wearable Ring
Screw
Spring Cushion
O-ring
Piston
Piston Rod
Head Cap
Cushion Ring
Barrel
Y Type-Ring
Back End Cover
Plain Cushion
Cushion Screw
Screw Nut
DesignationDesignationItem No.
Item No.
Bore
Bore
1-Store switch 2- Bracket SMBR-10~25 3-Fixing hole
4-Cushion screw S-Stroke
Compact cylinder type
Blank: BasicModel SA:Single Acting with spring extent SB:Single Acting with spring return
Blank: Pole of piston internal cogM: Pole of piston external cogN: Pole of piston no cog
S
12~100mm
Any stroke
S D
SD Series Compact Cylinder (Φ12~Φ100)
SD50X10
Φ12-Φ16 Φ20-Φ100
SD40X8-N
SD40X8-N
SD32X15
SD32
X15
Blank: No magnet S: magnet
◎Thin and light-weighted
With same action precision and working life, the compact cylinder is of 1/2~1/3 length of normal cylinder,
therefore with high performance of thin shape and light weight.
◎Magnetic switch
Attached with fixture base, the cylinder is made easy to fix, keep and adjust the magnetic switch.
Internal construction
Product Features
Male thread dimension
11
Specifications
Bore x Stroke
◎SDA type
Bore\Symbol
Kgf/cm2
Kgf/cm2
End Cap
O-Ring / Head
Piston
Anti-bump cushion
Head Cap Seal
Piston Rod
Buckle
Anti-bump cushion
O-Ring / Piston Seal
Cylinder Body
Head Cap
Piston Nut
Item No. Item No.Designation Designation
2 Width 2 Width
B2(B2+Single Acting Stroke) B2(B2+Single Acting Stroke)
E(E+Single Acting Stroke)
F(F+Single Acting Stroke)F(F+Single Acting Stroke)
E(E+Single Acting Stroke)
Special Order 8 Weeks Delivery
,
12
A+Stroke
2 width
2 width
C+Stroke
A+Stroke
C+Stroke
SD Series Dimensions
SD, SD-S
K1 Depth E
Bore\Symbol
Model Standard Type Attaching Magnet Type
Stroke≤10 Stroke>10
Bore\Symbol
Double Side:φ6.5 Cog M5x0.8 Through Hole:φ4.2
Double Side:φ6.5 Cog M5x0.8 Through Hole:φ4.2
Double Side:φ6.5 Cog M5x0.8 Through Hole:φ4.2
Double Side:φ8.2 Cog M6x10 Through Hole:φ4.6
Double Side:φ8.2 Cog M6x10 Through Hole:φ4.6
Double Side:φ10 Cog M8x1.25 Through Hole:φ6.5
Double Side:φ11 Cog M8x1.25 Through Hole:φ6.5
Double Side:φ11 Cog M8x1.25 Through Hole:φ6.5
Double Side:φ14 Cog M12x1.75 Through Hole:φ9.2
Double Side:φ17.5 Cog M14x2 Through Hole:φ11.3
K1 Depth E
S
12~100mm
S Q
S
6~16mm
S J
SJ Series cylinder (Φ6~Φ16)
16×50
SQ Series Compact Cylinder (Φ12~Φ100)
Blank: No magnet S: magnet
13
Single actingWith spring extend
Spring actingWith spring return
Single actingWith spring extend
Spring actingWith spring return
SQ 12X150-S
SQ 12X150-S
SQ 12X150-S
SQ 12X150-S
Type of hole in the front end-coverMPaMPa
MPa
MPa
Vertical
Rovizontal
Empty
dimension
Ensured Pressure Resistance
Working-pressure
Ambient and Medium Temperature
Thread Type
Cushion
Tolerance of Stroke
Lubrication
Installation
Joint Tube Caliber
Cylinder Diameter (mm)
Fluid
Acing Mode
Air
Double-acting
1.5kgf/cm2
1.0kgf/cm2
5-60℃
0
Not Required
Single acting :with spring return / with spring extend
Inner Thread(Standard) Outer Thread(Optional)
Through Hole (Standard), Inner size on the two sides(Optional)
Symbol
Doule-acting
Symbol
Specifications
Specifications
SQ: SMC Standard
Blank: Basic Model
SA:Single Acting with spring extent
SB:Single Acting with spring return
Bore x Stroke
Bore x Stroke
Stroke
Dimensions
Blank: Pole of piston internal cog
M: Pole of piston external cog
N: Pole of piston no cog
Blank: No magnet
S: Magnet
SJ: SMC Standard
Blank: BasicModel
SA:Single Acting with spring extent
SB:Single Acting with spring return
Max stroke 150mm
*Single acting bore max. size:φ50mm
Maik
Horizonal
Special Order 8 Weeks Delivery
Special Order 8 Weeks Delivery
14
SM Series stainless steel mini cylinder (Φ20~Φ40)
S
20~40mm
0~1000mm
Cylinder body: Stainless Steel Piston rod: Carbon Steel
Min Max
Seal: Polyurethane
: 10mm : 1000mm
End cover:Aluminium
S M
S
20~32mm
0~1000mm
E U
EU Series free installation cylinder (Φ6~Φ32)
20 25 32
EU20X60
With spring returnRubber Cushion
SM: SMC Standard
Blank: Basic Model D: Double shaft SA:Single Acting with spring extent SB:Single Acting with spring return
Bore x Stroke
Fixed Type:Blank: Basic Model
MLB:Front and back fixed typeMFA:Front cover fixed type(flange type)
MSU:Single U hookMDU:Double U hookME: Axis ear type
Blank: NomagnetS: magnet
Specifications
Specifications
Cylinder Diameter (mm)
Fluid
Acing Mode
Working-pressure
Temperature
Cushion
Speed
Material
Double acting Single acting
Air
EU:SMC standart
Blank:Basic Type
SA:single acting (with spring extend)
SB:single acting (with spring return)
Bore x Stroke
Blank:not attach magnet
S:attach magnet
Symbol
Doule-acting with non-rotating plunger
With spring extend
dry air
Adjustable cushion (optional)
Special Order 8 Weeks Delivery
Special Order 8 Weeks Delivery
10~32mm
0~1000mm
Side
loa
d
E N
10~25mm
0~1000mm
S R B
EN Series Double-shaft cylinder (Φ10~Φ32)
SR Series cylinder (Φ10~Φ25)
※Permit Side Load
SR 16x80
SR 16x100
15
Cylinder Diameter(mm)
Acting Mode
Working Medium
Range of working pressure Kgf/cm2
Guaranteed withstanding pressure Kgf/cm2
Range of working temperature ℃
Speed range mm/s
Buffer stroke mm
Buffer type
No-return precision
Joint Size(mm)
Cylinder Diameter(mm)
Acting Mode
Working Medium
Range of working temperature ℃
Range of working pressure Kgf/cm2
Guaranteed withstanding pressure Kgf/cm2
Speed range mm/s
Buffer type
Oil Supply
No-return precision
Joint Size(mm)
Double Activating
Air
1~9
13.5
-5~70
100~800
-10~0
Adjustable Buffer
Double Piston Double Acting
Air
-5~70
1~9
13.5
50~200
-10~0
Oil Pressure Buffer
No
Bore x Stroke
Specifications
Specifications
Bore x Stroke
EN:SMC Standard
Blank:basic type
Stroke
SR:SMC Standard
B: body fixed type
L: slide block fixed type
Special Order Items
Special Order Items
16
S
20~100mm
0-1000mm
S G
S
6~63mm
0~1000mm
S W
SG Series Three-shaft cylinder (Φ12~Φ100)
SW Series Rodless cylinder (Φ6~Φ63)
WB Basic type
WS Slide type
15X50
PT PT
Rubber Cushion
Slide Bearing/Ball Bearing
Cylinder Diameter (mm)
Fluid
Acing Mode
Ensured Pressure Resistance
Maximum Working-pressure
Minimum Working-pressure
Ambient and Medium Temperature
Piston control
*Cushion
Tolerance of stroke
**Lubrication
Joint Tube Caliber
Air
Double-acting
1.05Mpa(10.5kgf/cm2)
0.7Mpa(7.1kgf/cm2)
0.18Mpa(1.8kgf/cm2)
5-60℃
50-400mm/s
With Rubber cushion at two sides
0-250: , 251-1000: , 1001-:
Not Required
Specifications
Specifications
SG:SMC Standard
M:guide-rod bearing is slide bearingB:guide-rod bearing is ball guide bearing
Bore x Stroke
Bore x Stroke
Blank: No magnetS:magnet
Blank: No magnetS: magnetSW:SMC Standard B:basic type
S:slide type
* With optional oil pressure shock absorber (only for the model -ECYIS with slide ruber)
Special Order Items
Special Order Items