system pipes and ﬁttings - jhplumb.com€¦ · acquiring far more than a means of simply doing a...

System pipes and fittings

2

StandardsAt Pegler Yorkshire we are dedicated todesigning, developing and manufacturingproducts of the highest quality. We aremembers of numerous standards committeesand take an active part in their development.Our products, where applicable, comply with the relevant British, European andInternational standards. Whatever the latestdevelopments, we guarantee that ourproducts will always meet the latest andhighest standards.

Pegler Yorkshire.The promise of exceptionalquality, reliability and whole-life value for money.

As part of the global Aalberts Industries NV Group,Pegler Yorkshire is one of Britain’s largest and mostrespected manufacturers of innovative market-leadingproducts for today’s ever more demanding and diverseplumbing and heating industries.

Behind every one of the company’s veryextensive portfolio of famous brand namesare two unparalleled key benefits: morethan two hundred years of pricelessexpertise and experience combined withcontinuous investment in research,development, new technology, advancedproduction facilities and, of course, inpeople dedicated to the task.

Hence Pegler Yorkshire’s ability to not onlysustain but to build upon a reputation theworld over for exceptional quality,performance, reliability and whole-life valuefor money.

Increasingly, Pegler Yorkshire’s substantialresources are also focused on developingsolutions which, where possible, addresscrucial environmental issues such as savingwater and reducing energy consumption atevery opportunity.

So when you purchase or specify any of our tried and trusted products, you areacquiring far more than a means of simplydoing a job. You are guaranteeing aconsistantly high quality installation.

This is all backed by impeccable customerservice, training and technical support, with comprehensive warranties and longterm parts availability.

FM 27630

QUALITY SYSTEMSPegler & Yorkshire Fittingsare British StandardsInstitution registeredcompanies.

INTERNATIONAL STANDARDSORGANISATION

3

Introduction, features and benefits

XPress Multi is a new innovation for the distribution of plumbing and heatingwhich represents a real advance in terms of reliability and application.

Pegler Yorkshire has added XPress Multi to itscomprehensive product range to ensure thatwe continue to offer a pipework system forevery application.

XPress Multi complements the other systemsthat we offer and has features which make itideally suited to the following applications:

Connection to fan coil units XPress Multi offers flexible installation onfinal connection to fan coils, chilled beamsand manifolds. This in turn minimises jointuse and reduces vibration transmission whichmeans that the system is quicker to installand quieter in use.

Connection to radiatorsAnother characteristic feature of XPress Multiis the clean white finish of the pipe thatlends itself to final connection to radiators.The pipe is easily formed and retains itsshape. This means that it’s simpler and moreconvenient to use when making the finalconnection, saving time and cost. Thealuminium layer in the tube also makes thepiping resistant to oxygen diffusion into thewater which helps prevent corrosion of anyferrous components in the piping system.

Under floor heatingThe dimensional stability and low heatexpansion properties of multi layer compositepipe along with the aluminium layer thatkeeps the pipe from returning to its originalcoiled shape makes installation easier. Thiswith the requirement for fewer clips to holdthe pipe in place means a saving on bothmaterial and labour during installation.

XPress MultiXpress Multi pipe comprisesPEX/Aluminium/PEX, and is a perfectcombination of metal and synthetics. It isjust as suitable for new installations as it isfor renovations for all plumbing and heatingapplications.

Product features� WRAS Approved*.

� Low heat expansion: 7 times less than PEX.

� Non-corrosive: for interior or exterior use.

� Prevents limescale build-up.

� Impermeable to oxygen.

� Reduces noise.

� UV resistant.

� Available in 50m, 100m or 200m rollsor 5m straight lengths.

� Standard or pre-covered insulated.

� Complete range of fittings.

*WRAS Approval for 16–32mm

Installation benefits� Workable by hand.

� Resistant (retains a given shape).

� Suitable for plumbing and heatingapplications.

� Flexible at any temperature (even in extreme cold).

� Surface mounting or embedded.

� Can be located in floors or walls by a metal detector.

� Can be either concealed or exposed.

� Fast and efficient installation.

� Reduces waste during installation.

Under floor heating Connection to radiators Connection to fan coil units

4

Introduction, features and benefits

Technicalcharacteristics� Heat conductivity: 0.43 W/mK.

� Heat conductivity on pre-insulated pipe:0.035 W/mK.

� Co-efficient of expansion: 0.024 mm/mK.

� Degree of reticulation: >60%.

� Oxygen diffusion: 0.

� Maximum operating temperature: 95°C.

� Maximum operating pressure at 95°C: 10bar.

� Surface roughness (internal pipe):0.0015mm.

Equivalent lengthsPressure loss equivalence between fitting and pipe length.

Example: an elbow ø16 = 5m of ø16 pipeLength of pipe

Type of fitting ø14 ø16 ø20 ø26

Elbow 7.2m 5m 4.5m 4.3m

Equal Tee (straight) 4.3m 2.5m 3.3m 1.5m

Equal Tee 8.5m 5.4m 6.8m 4.7m

Equal Tee 8.7m 3.6m 6.9m 4.6m

Heat expansionExpansion comparisons from 20ºC to 50ºC (Δ = 30°C)

for a 10m length of pipe.

SteelCopperMultiPEX

3.6mm5.1mm

7.2mm48mm

543210

Pressure loss diagram

100

10

1

0.1

0.011 10 100 1,000

63 x 4.5

50 x 4

40 x 3.5

32 x 3

26 x 3

20 x 2

16 x 214 x 2

85

2

1

0.50.3

Pressure loss (mbar/m)

Flow (l/s)

Water temperature 10ºC

Speed of circulation (m/s)

Diameter x thickness (mm)

How does XPressMulti system work?CompositionExternal layer of Pex type B (1):protection against external elementsAluminium butt welded (2): rigidityInternal layer of Pex type C (3):protection against corrosionHigh performance adhesive betweenlayers (4): cohesion

1 2 3

4 4

5

Xpress Multi with Visu-Control® SystemXpress Multi has a connection system withimmediate crimping proof that you can seeand touch.

Visu-Control® SystemThe green ring added on each connectionenables easy verification of fittings which have been left uncrimped at the time ofinstallation and before filling or pressuretesting the system.

System characteristics� Compatibility: Xpress Multi pipe with

Visu-Control® is compatible with profile TH tools.

� Crimping: Thousands of tests carried out inthe laboratory and on site confirm that thejaws of a crimp machine are not affected byusing the Visu-Control® system.

� Patent: Visu-Control® is a patentedtechnology.

1 3 5

2

4

Not crimped

Crimped

Crimped

Fitting features1. ‘U’ shaped window: allows pipe to be

viewed to ensure correct installation.2. Tinned surface: prevents corrosion

in concealed installations.3. O-ring protection: avoids any risk of

damage or dislodging when fitting the tube.

4. Easy tube connection: fittings are easily connected.

5. Dielectric protection: limits electricalcurrent and prevents corrosion.

Range fittingspecificationXpress Multi with Visu-Control® fittings areavailable for heating and plumbing applications,in sizes from 14 mm up to 63 mm for XpressMulti pipes.

Visu-Control® fittings are made according toEuropean standards. They need to be crimpedwith a TH profile press tool jaw.

1. Plastic ring to maintain sleeve and to check crimping has been made.

2. EPDM O-ring DVGW Certified, according to W534.

3. Brass body according to EN 12165 and EN 12164.

4. Stainless steel ring.5. TH crimping profile.

Pipe diameter (mm) Wall thickness (mm)

14 216 220 226 332 340 3.550 463 4.5

1

1 2 3

4

4

5

2 3

Pipe Dimensions

6

Installation instructions

Size A (mm)

14x2 22.1516x2 22.1520x2 22.1526x3 23.1532x3 23.15

Dimension (mm) X Y1 Y2

14 35 52 7516 35 52 7620 35 52 7826 35 53 8332 35 53 8740* 75 75 11050* 85 85 12063* 90 90 130

Installation methodXpress Multi is connected by crimping thefitting to the tube, using a crimping machine.The seal is guaranteed due to the O-ring.

The toolPegler Yorkshire advises the use of anapproved crimp machine. For further detailson crimping machines, see page 17-18 or callsales on 0870 120 0284.

A

X

Y 2

Y 1

1

2

3

2. Deburr the inside of the tube and wipeto remove any debris. Recalibrate thepipe using a calibration tool set to thecorrect diameter. (This gives a bevellededge and ensures the pipe is completelycylindrical).

4

4. Make the tool safe by isolating it fromthe power supply. Select the correctjaws for the joint being made, checkingthat they are free from damage. Attachthe jaws, following the instructions foryour particular press-tool, and reconnectthe power supply when ready. Place thejaws over the green ring of the fitting,maintaining a 90° angle to ensure theintegrity of the joint, and to protectyou from ‘kickback’, where there is a riskof the machine moving sideways. Withthe tool fully supported and nothanging from the pipe work, and withyour hands safely away from the jawsstart the pressing cycle. Releases thejaws from the fitting and inspect thejoint visually check that the fitting hasbeen crimped. On completion ofinstallation visually check that ALLfittings have been crimped.

Installation at the base of a wall

1. Cut the pipe using pipe shears at 90°angle to the pipe. This ensures a squarecut without burrs. Don’t forget to addthe length of the pipe inside the fittingin your calculation («A» dimension).

3. Push pipe firmly into fitting until thepipe appears in ’U’ shaped window.

Note: When using power tools, great care must be taken at all times. Always refer to the manufactirers’ instructions for all machines and tools you use.For 40mm, 50mm and 63mm jointing sling jaws must be used. For further information on press-fit jointing please refer to video on websitewww.pegleryorkshire.co.uk and Xpress data book Lit Ref: 880296.

7

SM520 White Multi pipe (straight lengths)

Length (m) Size (mm) Wall thickness (mm) Pack Qty Code £ per metre

5 16 2 20 84515M 2.615 20 2 13 84516M 3.675 26 3 7 84517M 5.875 32 3 5 84518M 8.005 40 3.5 4 84519M 12.355 50 4 4 84520M 18.425 63 4.5 4 84521M 30.47

TubeMulti layer pipe


SM525 White Multi pipe (coil)


100 14 2 1 84500M 1.99100 16 2 1 84501M 1.88200 16 2 1 84502M 1.88100 20 2 1 84504M 2.8250 26 3 1 84505M 4.8050 32 3 1 84506M 7.14

SM530 Blue covered Multi pipe (coil)


100 14 2 1 84507M 2.48100 16 2 1 84508M 2.87100 20 2 1 84510M 4.00

SM535 Red covered Multi pipe (coil)


100 14 2 1 84512M 2.48100 16 2 1 84509M 2.87100 20 2 1 84511M 4.00

Fittings


8

SM1 Straight coupling

Size (mm) Bag Qty A B Code £ each

14 5 58 24 84000M 4.8916 2 58 26 84001M 3.2920 2 58 30 84003M 4.6026 2 60 36 84004M 6.4232 2 62 42 84005M 10.3540 2 64 50 84110M 13.6450 1 101 60 84111M 18.6563 1 101 73 84112M 34.99

ØB

ØB

A

SM1C Adaptor CU compression

Size (mm) Bag Qty A B C Code £ each

16 x 15 2 54 26 24 84042M 5.1120 x 22 2 54.1 30 32 84043M 6.4026 x 22 2 55.1 36 32 84044M 7.97

He x

.C

ØB

A

SM1R Reducing coupling


16 x 14 5 60 26 24 84017M 3.1320 x 14 5 60 30 24 84018M 3.4720 x 16 2 60 30 26 84019M 4.5426 x 16 2 61 36 26 84021M 5.9626 x 20 2 61 36 30 84023M 5.9632 x 16 2 63 42 26 84024M 9.4632 x 20 2 63 42 30 84026M 9.3532 x 26 2 64 42 36 84027M 10.3540 x 26 2 66 50 36 84034M 13.4940 x 32 2 66 50 42 84035M 13.4950 x 32 1 85.5 60 42 84036M 16.1150 x 40 1 85.5 60 50 84037M 16.5163 x 40 1 83.5 73 50 84038M 32.2863 x 50 1 101 73 60 84039M 32.22

ØC

ØB

A

9

SM2 Straight female coupling


14 x 1/2" 5 52.5 27 24 84080M 3.0116 x 1/2" 2 52.5 27 26 84081M 4.6220 x 1/2" 2 52.5 27 30 84084M 5.2620 x 3/4" 2 54.5 33 30 84085M 5.2626 x 3/4" 2 55.5 33 36 84086M 7.2026 x 1" 2 55.5 40 36 84087M 7.2032 x 1" 2 55.5 40 42 84088M 10.5240 x 3/4" 2 49 50 50 84093M 10.5240 x 11/4" 2 61.5 48 50 84094M 11.9550 x 11/2" 1 76.5 63 60 84095M 20.3463 x 2" 1 80.5 71 73 84096M 26.90

ØC

ØB

A

SM3 Straight male coupling (taper)

Size (mm) Bag Qty A B C D Code £ each

14 x 1/2" 5 50.5 24 UNI ISO7/1 - R1/2" 22 84050M 2.9616 x 1/2" 2 50.5 26 UNI ISO7/1 - R1/2" 22 84051M 4.0120 x 1/2" 2 50.5 30 UNI ISO7/1 - R1/2" 22 84054M 5.4220 x 3/4" 2 51.5 30 UNI ISO7/1 - R3/4" 27 84055M 5.4226 x 3/4" 2 52.5 36 UNI ISO7/1 - R3/4" 30 84056M 7.6426 x 1" 2 55.5 36 UNI ISO7/1 - R1" 34 84057M 7.6432 x 1" 2 55.5 42 UNI ISO7/1 - R1" 34 84058M 10.0640 x 11/4" 2 56.5 50 UNI ISO7/1 - R11/4" 45 84062M 11.6050 x 11/2" 1 84 60 UNI ISO7/1 - R11/2" 52 84063M 21.8663 x 2" 1 85.5 73 UNI ISO7/1 - R2" 66 84064M 37.89

Hex

.D

ØB C

A

ØA

ØA

B

B

SM12 Elbow


14 2 24 44 84140M 4.4016 2 26 44 84141M 3.1420 2 30 50.5 84143M 4.6026 2 36 54 84144M 7.6832 2 42 54 84145M 11.6540 2 50 54 84137M 18.6150 1 60 77 84138M 23.7763 1 73 85.5 84139M 43.86

Fittings


10

SM12C Elbow CU compression


16 x 15 2 50 39 26 24 84190M 6.7620 x 22 2 53 45.6 30 32 84191M 7.7226 x 22 2 54 45.6 36 32 84192M 8.02

ØC

Hex

.D

A

B

SM12SLB Long street elbow (extended end 300mm)


16 x 15 2 15 300 80.5 26 84212M 7.6820 x 15 2 15 300 80.5 30 84214M 11.45

ØA

ØD

B

C

SM13 Male elbow (taper)


16 x 1/2" 2 26 50 33.5 UNI ISO7/1-R1/2" 84161M 5.9020 x 1/2" 2 30 50 33.5 UNI ISO7/1-R1/2" 84163M 8.9320 x 3/4" 2 30 50 34.5 UNI ISO7/1-R3/4" 84164M 8.9326 x 3/4" 2 36 54 39 UNI ISO7/1-R3/4" 84165M 11.4332 x 1" 2 42 54 45.5 UNI ISO7/1-R1" 84166M 16.8640 x 11/4" 2 50 54 53 UNI ISO7/1-R11/4" 84168M 19.82

B

ØA

ØD

C

SM14 Female elbow


16 x 1/2" 2 26 50 34 26.5 84176M 5.3220 x 1/2" 2 30 50 34 26.5 84178M 6.4720 x 3/4" 2 30 53 42.5 33 84179M 6.4726 x 3/4" 2 36 54 42.5 33 84180M 11.4932 x 1" 2 42 54 49 39 84181M 16.7740 x 11/4" 2 50 54 55.5 48 84184M 18.1750 x 11/2" 1 60 77 60 55 84185M 27.82

B

ØA

ØD

C

11

SM14S Street elbow CU


16 x 2 x 15 2 15 150 44 26 84806M 6.3820 x 2 x 22 2 22 60 53 30 84807M 5.8526 x 3 x 22 2 22 60 54 36 84808M 6.97

ØA

ØD

B

C

SM15 Backplate elbow

Size (mm) Bag Qty A B C D E F G H Code £ each

14 x 1/2" 2 47.5 23 40 26 24 40 52 26 84375M 6.7016 x 1/2" 2 47.5 23 40 26 26 40 52 26 84376M 13.1620 x 1/2" 2 47.5 23 40 26 30 40 52 26 84378M 10.70

C

B

ØE

ØFG

ØD

A

H

SM21 Obtuse elbow


26 2 36 54 84150M 14.6932 2 42 54.25 84151M 17.5140 2 50 54 84155M 19.1450 1 60 77 84156M 29.0463 1 73 85.5 84157M 54.32

ØA

ØA

B

B

SM24 Equal tee


14 2 88 44 24 84225M 5.9216 2 88 44 26 84226M 5.5220 2 101 50.5 30 84228M 7.4026 2 108 54 36 84229M 11.0332 2 108.5 54.25 42 84230M 21.6440 2 108 54 50 84234M 24.4350 1 154 77 60 84235M 30.2763 1 171 85.5 73 84236M 46.44

ØCØ

C

ØC

B

A

Fittings


12

SM24S Tee, street ends


20 x 2 x 15 2 94 50.5 15 30 84809M 5.2926 x 3 x 15 2 94 54 15 36 84810M 6.9126 x 3 x 22 2 110 54 22 36 84811M 7.95

ØD

ØC

ØC

B

A

SM24SB Long branch street tee


16 x 15 2 86 26 15 300 84271M 11.2120 x 15 2 86 30 15 300 84273M 17.0325 30°

ØC

ØB

ØB

D

A

SM25 Tee, reduced branch

Size (mm) Bag Qty A B C D E Code £ each

20 x 20 x 14 2 101 50.5 30 24 30 84285M 6.4620 x 20 x 16 2 101 50.5 30 26 30 84289M 8.0526 x 26 x 16 2 108 53 36 26 36 84297M 9.8026 x 26 x 20 2 108 53 36 30 36 84303M 14.9232 x 32 x 16 2 108.5 53 42 26 42 84307M 16.3332 x 32 x 20 2 108.5 53.25 42 30 42 84309M 17.3032 x 32 x 26 2 108.5 54.25 42 36 42 84311M 18.9140 x 40 x 26 2 108 54 50 36 50 84329M 23.9140 x 40 x 32 2 108 54 50 42 50 84330M 27.2350 x 50 x 26 1 154 60 60 36 60 84331M 26.9050 x 50 x 40 1 154 60 60 50 60 84332M 48.5063 x 63 x 26 1 171 69 73 36 73 84333M 50.1463 x 63 x 40 1 171 70 73 50 73 84334M 52.23

ØD

ØE

ØC

B

A

SM26 Tee, one end reduced


20 x 16 x 20 2 101 50.5 30 30 26 84292M 8.0526 x 16 x 26 2 107 54 36 36 26 84304M 12.8426 x 20 x 26 2 107 54 36 36 30 84305M 13.2132 x 26 x 32 2 108.5 54.25 42 42 36 84312M 19.57

ØD

ØE

ØC

B

A

13

SM27 Tee, one end and branch reduced


16 x 14 x 14 2 88 44 26 24 24 84280M 5.9420 x 16 x 16 2 101 50.5 30 26 26 84287M 7.9126 x 16 x 16 2 107 53 36 26 26 84295M 8.6326 x 16 x 20 2 107 53 36 30 26 84301M 8.8226 x 20 x 16 2 107 53 36 26 30 84296M 8.8026 x 20 x 20 2 107 53 36 30 30 84302M 14.7232 x 26 x 26 2 108.5 54.25 42 36 36 84310M 17.99

ØD

ØE

ØC

B

A

SM28 Tee, both ends reduced


16 x 16 x 20 2 101 50.5 26 30 26 84282M 8.4120 x 16 x 26 2 106 54 30 36 26 84293M 9.4220 x 20 x 26 2 106 54 30 36 30 84294M 9.6026 x 26 x 32 2 108.5 54.25 36 42 36 84306M 17.88

ØD

ØE

ØC

B

A

SM30 Female branch tee


16 x 16 x 1/2" 2 91.5 33.5 26 26.5 84255M 12.1820 x 20 x 1/2" 2 91.5 33.5 30 26.5 84257M 14.1020 x 20 x 3/4" 2 106 42 30 33 84258M 14.1026 x 26 x 1/2" 2 108 38 36 26.5 84259M 16.0226 x 26 x 3/4" 2 108 42 36 33 84260M 16.0226 x 26 x 1" 2 108 49 36 39 84261M 16.0232 x 32 x 1/2" 2 108 40 42 26.5 84262M 20.6132 x 32 x 11/4" 2 118 55.5 42 48 84263M 20.6140 x 40 x 1" 2 108 51 50 39 84267M 20.9440 x 40 x 11/4" 2 108 55.5 50 48 84268M 22.0150 x 50 x 1" 1 108 53 60 39 84269M 32.62

ØD

ØC

ØC

B

A

SM30C Compression branch tee


16 x 16 x 15 2 91.5 39 26 24 84320M 9.78

hex. D

ØC

ØC

B

A

Fittings


14

SM61 Stop end


14 5 24 32 84100M 2.4516 2 26 32 84101M 4.8520 2 30 32 84103M 5.7226 2 36 34.5 84104M 7.2832 2 42 35.5 84105M 8.9640 2 50 36.5 84107M 11.98

SM648 Compression adaptor

Size (mm) Bag Qty Material Code £ each

16 x 15 2 Brass 84395M 2.3216 x 15 2 Nickel 84396M 2.60

SM1497 Two port manifold

Size Bag Qty Code £ each3/4" x 1/2" 1 84450M 11.381" x 1/2" 1 84451M 10.63

ØA

B

SM62 Tap/manifold connector


14 x 1/2" 5 47 24 24 84439M 5.2216 x 1/2" 2 50 26 24 84440M 5.3220 x 1/2" 2 52.5 30 25 84441M 5.87

ØB

Hex

.C

A

SM1498 Three port manifold


15

SM1499 Four port manifold


SM101 Pipe clips

Size (mm) Bag Qty Code £ each

14 - 16 100 84599M 0.4616 - 20 100 84600M 0.6120 - 23 50 84601M 0.6124 - 28 50 84602M 0.7632 - 35 50 84603M 1.2240 - 44 25 84605M 1.8348 - 54 20 84607M 2.2958 - 65 15 84609M 2.29

SM9832 Manifold support bracket


2 84465M 7.17

SM140 Pipe shears


14 - 26 1 84761M 9.5414 - 40 1 84762M 127.6710 - 63 1 84763M 157.03

SM250 Calibrating tool insert


14 1 84714M 33.4316 1 84715M 31.2320 1 84716M 34.0926 1 84717M 39.9332 1 84718M 45.45

Fittings


16

SM251 Calibrating tool handle (inserts supplied separately SM250)


14-32 1 84725M 39.10

SM252 Calibrating tool box


1 84726M 49.89

SM253 Internal bending spring


16 1 84735M 15.3720 1 84736M 16.81

SM254 External bending spring


16 1 84745M 15.9220 1 84746M 19.35

SM255 Bending machine


14 - 26 1 84755M 248.11

17

Press tools approved for pressing XPress Multi

Dimension Manufacturer Press machine Press jaws/slings Profile(mm)

14 - 40 Novopress Presskid Battery powered (9.6V) 14-32mm Jaws TH

AFP 101 Battery powered (12V) 14-26mm Jaws with inserts THAFP 101 Jaws 14-40mm TH

14 - 63 Novopress ECO 201 Jaws 14-32mm THEFP 2 Jaw with inserts 14-32mm THACO 3 Pressmax (12V) Battery powered Slings & adaptor 40-50-63mm THACO 201 (14.4V) Battery poweredEFP 201 AFP 201ECO 3 Pressmax ECO 301

14 - 32 Rems Mini-Press ACC (12V) Battery Powered Mini tongs 14-26mm THMini tong 32mm THL

14 - 63 Rems Powerpress Jaws 14-26mm and 40mm THPowerpress E Jaw 32mm THLPowerpress ACC 3 Segment jaws 50 and 63 THAkku-Press (12V) Battery poweredAkku-Press ACC (12V)

14 - 28 Klauke Klauke Mini MAP1 (9.6V) Battery powered Mini-jaws 14-32mm KSP11Jaw with inserts 14-32mm KSP11

14 - 63 Klauke UNP2 Jaws 14-40mm KSP11UAP2 Battery powered (12V) Chain with inserts 40-63mm KSP11

Further technical information is available on request. Please telephone Pegler Yorkshire advice desk on: 0870 1200285

Press tools


The XPress ranges

18

Suitable for:� Hot & cold water services� Vented & unvented closed circuit heating� Chilled water and oilfree compressed

air applications

Xpress Copper fittings are manufacturedfrom copper and copper alloy and are idealfor fast, effcient jointing of copper tube toBS EN 1057 R250 and R290 in sizes from15mm to 108mm.

Where pipeline systems are constructedexclusively from Xpress Copper fittings andYorkex tube to BS EN 1057 from YorkshireCopper Tube Limited, the resultinginstallation will be deemed an Xpress CopperSystem and as such qualify for a 30 yearguarantee against all manufacturing defects.

Xpress copper fittings have all been testedand are suitable for use with approvedtubes at temperatures from -24°C to 110°Cat a maximum working pressure of 16 barthroughout the temperature range.

Suitable for:� Potable water applications where water

quality and hygiene are crucial� Food, pharmaceutical and healthcare

environments

XPress Stainless is our stainless steel systemoption. Optimised for use as a system, therange incorporates both stainless steelpress-fit fittings and stainless steel 316System tube.

XPress Stainless fittings are manufacturedfrom 316 (BS 316S31/DIN 1.4401) or 316Ti(BS 320S31/DIN 1.4571) stainless steel andhave black EPDM ‘O’ rings.

XPress Stainless fittings have been testedand are suitable for use with approvedtubes at temperatures from -20ºC to 110ºCat a maximum working pressure of 16 barthroughout the temperature range.

Suitable for:� Vented and unvented closed

circuit heating� Chilled water applications

XPress Carbon is our carbon steel systemoption. Again optimised for use as a systemthe range incorporates carbon steel press-fitfittings in sizes from 15mm to 108mm andtwo carbon steel System tube options –galvanised carbon steel System tube in sizesfrom 15mm to 108mm and plastic coatedcarbon steel System tube in sizes from15mm to 54mm.

XPress Carbon fittings are manufacturedfrom EN 10027-1S205G2T (formerly knownas Rst34-2) carbon steel and have blackEPDM ‘O’ rings.

XPress Carbon fittings have been tested andare suitable for use with approved tubes attemperatures from -20ºC to 110ºC at amaximum working pressure of 16 barthroughout the temperature range.

19

Suitable for:� use on above ground� 2nd and 3rd family gas service pipelines,

including instances where high levels of hydrogen sulphide make copper

� 2nd family gas is natural gas, and 3rd family gas is LPG, compressed propane and butane.

XPress Stainless Gas press-fit fittings aredesigned for the fast, efficient, heat-freejointing of XPress Stainless steel Systemtubes and other stainless steel tubes toDVGW GW541.

XPress Stainless Gas fittings aremanufactured from 316 (BS 316S31/DIN1.4401) or 316Ti (BS 320S31/DIN 1.4571)stainless steel and have yellow High QualityAcrylonitrile Butadiene Rubber (H-NBR) ‘O’ rings.

XPress Stainless Gas fittings can beidentified by a yellow PN5 GT/5 labelapplied to the body. Fittings also haveyellow ‘O’ rings. Fittings not conforming tothese means of identification should not beused for gas installations.

XPress Stainless Gas fittings are approvedfor use at temperatures from -20ºC to 70ºC,with a maximum working pressure for aboveground pipework of 5 bar inside and outsidebuildings. As part of the DVGW approvalsprocess, XPress Stainless Gas fittings havepassed the HTC test (Higher ThermalCapacity) at 650°C for 30 minutes at PN5.

Suitable for:� Internal and External applications� Above ground 2nd and 3rd family gas

service pipelines

XPress copper gas fittings are alsomanufactured from copper or copper alloy.Available in sizes from 15mm to 54mm, thefittings are compatible with copper tube toBS EN 1057 R250 and R290.

Xpress copper gas fittings are guaranteedfor 30 years against manufacturing defectswhen installed exclusively with Yorkexcopper tube from Yorkshire Copper TubeLimited, or for 25 years when used withother products.

GUARANTEES

25 YEAR GUARANTEEThe XPress Copper, Gas andStainless ranges are guaranteedagainst all manufacturing defectsfor 25 years when installed alongwith other manufacturers pipelinecomponents conforming to thespecified standard.

30 YEAR GUARANTEEWhere pipelines are constructedexclusively from compatibleXPress Copper, Gas and Stainless fittings and tubes, the resultinginstallations will be deemedXPress Systems and as suchqualify for a 30 year guaranteeagainst all manufacturing defects.

QUALIFYING SYSTEMS• XPress Copper fittings and

Yorkex copper tube • XPress Gas fittings and Yorkex

copper tube • XPress Stainless fittings

and stainless steel 316 Systemtube

XPRESS CARBON• XPress Carbon fittings are

guaranteed for 5 years againstall manufacturing defects wheninstalled along with othermanufacturers tubes conformingto the specified standard.

• Where pipelines are constructedexclusively from XPress Carbonfittings and tubes, the resultinginstallations will be deemedXPress Carbon Systems and assuch qualify for a 10 yearguarantee against allmanufacturing defects.

To qualify for guarantees, allproducts must be installed inaccordance with our instructionson specified applications.

XPress technical helplineTel 0870 120 0285

For sales information, please contact:

UK regions

Northern teamTel 0870 120 0281 Fax 01302 560108Email [email protected]

Southern teamTel 0870 120 0282 Fax 01302 560458Email [email protected]

Western teamTel 0870 120 0283 Fax 01302 560109Email [email protected]

Eastern teamTel 0870 120 0282 Fax 01302 560458Email [email protected]

Worldwide exportsTel +44 (0) 1302 855656 Fax +44 (0) 1302 730513Email [email protected]

www.yorkshirefittings.co.uk

Pegler Limited, St. Catherine’s Avenue,Doncaster, South Yorkshire, DN4 8DF, England.Registered Company No. 01194543Place of Registration: England

Yorkshire Limited, Haigh Park Road, Stourton,Leeds, West Yorkshire, LS10 1RT, England.Registered Company No. 00401507Place of Registration: England

All brand names and logo styles are registered trademarks.Maintaining a policy of continual product development,Pegler Yorkshire reserves the right to change specifications,design and materials of products listed in this leafletwithout prior notice.LIT.REF: 880101.07.08

LUXURY TAP SOLUTIONS

Also available from Pegler Yorkshire:

Our brands:

system pipes and ﬁttings - jhplumb.com€¦ · acquiring far more than a means of simply doing a...

Documents