system on module iw-rainbow-g24m arria 10 soc module€¦ · som board to board connector....
TRANSCRIPT
![Page 1: System On Module iW-RainboW-G24M Arria 10 SoC Module€¦ · SOM board to board connector. APPLICATIONS: Test and measurement equipment, Control and intelligence equipment, Diagnostic](https://reader035.vdocuments.site/reader035/viewer/2022071003/5fc0398cdb41a277212c4883/html5/thumbnails/1.jpg)
System On Module iW-RainboW-G24M
Arria 10 SoC Module
www.iwavesystems.com
iW-RainboW-G24M
HIGHLIGHTS
SPECIFICATIONS
iWave’s Arria 10 SoC System on Module is based on the Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. All the IOs and high speed transceiver blocks will be available on the SOM board to board connector.
APPLICATIONS: Test and measurement equipment, Control and
intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment, Broadcast and distribution equipment.
SOC: Arria10 SoC
Dual Core, Cortex - A9 CPU @ 1.5GHz
SX270 (10AS027) FPGA Fabric
35mm x 35mm F34 Package
Memory:
1GB DDR4 with optional ECC for HPS
1GB SLC NAND Flash for HPS
Optional 64-bit DDR4 for FPGA
QSPI Flash for FPGA (Optional)
Communication:
10/100/100 Ethernet PHY For HPS
USB2.0 transceiver for HPS UTMI
Power Supply:
5V through SOM B2B connectors
Temperature support:
-40°C to +85°C Industrial
Dual 240 Pin Board to Board Connector:
Arria10 SoC HPS IO interfaces:
Gigabit Ethernet x 1 Port
USB 2.0 OTG x 1 Port
SD (4bit) x 1 Port
SPI x 1 Port, I2C x 1 Port
Full Function UART x 1 Port
Console UART, GPIOs – 4 Nos
Arria10 SoC FPGA IO interfaces:
24 high-speed transceivers
76LVDS/152SE FPGA IOs
8LVDS/8SE General purpose clock outputs
7LVDS/7SE General purpose clock inputs
Headers: HPS/FPGA JTAG, FPGA AS headers
OS Support: Linux 4.1.22
Form Factor: 95mm x 75mm
Arria10 SOC & FPGA device compatibility
SX270, SX320, SX480, SX570, Sx660
24 high speed transceivers @ 17.4Gbps
Up to 76LVDS/152SE FPGA IOs
8LVDS/8SE General purpose clock outputs
7LVDS/7SE General purpose clock inputs
64 - Bit DDR4 support for FPGA
Dual 240 Pin Board to Board Connector
Variable IO voltage support
Industrial Grade operation
Gx270, GX320, GX480, GX570, Gx660,
GX900, Gx1150
![Page 2: System On Module iW-RainboW-G24M Arria 10 SoC Module€¦ · SOM board to board connector. APPLICATIONS: Test and measurement equipment, Control and intelligence equipment, Diagnostic](https://reader035.vdocuments.site/reader035/viewer/2022071003/5fc0398cdb41a277212c4883/html5/thumbnails/2.jpg)
OS SUPPORT
Linux 4.1.22
Arria 10 SoC SOM - BLOCK DIAGRAM
OPTIONAL KITS/ModulesDELIVERABLES
Arria 10 SoC SOM Arria 10 SoC Development Kit
Board Support PackageUser Manual
CUSTOM DEVELOPMENT
BSP Development/OS PortingCustom SOM/Carrier Development Custom Application/GUI Development Design Review and Support
Ordering the Arria 10 SoC SOM The SOM Module can be ordered online from the iWave Websitehttp://www.iwavesystems.com/webforms
iWave Systems Tech. Pvt. Ltd.,th nd7/B, 29 Main, BTM Layout 2 Stage,
Bangalore-560076, India. Ph:+91-80-26683700, 26786245Email: [email protected]
iWave Japan, Inc.8F-B, Kannai Sumiyoshi Building,3-29, Sumiyoshi-cho, Naka-ku, Yokohama, Kanagawa, Japan.Ph: +81-45-227-7626Email: [email protected]
iW-G
24M
-BR
-R1.2
Note: iWave reserves the right to change these specifications without notice as part of iWave’scontinuous effort to meet the best in breed specification. The registered trademarks are proprietaryof their respective owners.
*Optional items not included in the standard deliverables.
ple SOMs based on ARMNXP, Intel Atom, Marvell and TI Processors.
iWave System has won the confidence of its c
iWave EuropePostbus 61973130 DD VlaardingenThe NetherlandsPh: +31 10 28403383Email: [email protected]
SOM Board to Board
High Speed Conenctor1
(240Pin)
Hard Processor System(Dual ARM® Cortex™- A9)
Arria10 SX/GX
Debug UART
UART (with CTS & RTS)
I2C
GPIOs (Upto 10nos)
USB1
EMAC1
UART0
UART1
I2C1
GPIOs
USB2.0PHY
Ethernet PHY
UTMI
RGMII
SDRAM Controller
(Bank 2J & 2K)
SDMMC
DDR4 (32bit)DDR4 – 1GB(Upgradable)
DDR4 (ECC)
Micro SDConnector
DDR4 ECC (8bit)
SD (4bit)
FPGA AS Header
(Op�onal)
AS Interface
Configura�on Flash
(Op�onal)
High Speed Transceiver (4 Channels)
FPGA
Bank 1D
Bank 1C
Bank 1F
Bank 1E
Ac�ve Serial
High Speed Transceiver (6 Channels)
FPGA IOs (24LVDS/48SE)
FPGA IOs (24LVDS/48SE)Bank 3C
Bank 2A
Bank 3A
Bank 3B
FPGA IOs (46SE)
FPGA IOs (46SE)
High Speed Transceiver (6 Channels)
High Speed Transceiver (6 Channels)
Transceiver PHYTransceiver P
HY
FPG
A IO
sFP
GA
IOs
JTAGJTAG
Note:
• HPS (Hard Processing System) is supported only in Arria10 SoC family (SX) devices.
• All IOs in SOM Board to Board connectors are 1.8V tolerant IOs. Optionally, Bank 2A and Bank 3A supports variable IO level setting(1.8V,1.5V, 1.35V,1.2V).
• Each FPGA IO Bank (2A,3A,3B,3C) which goes to Expansion connectors support two General Purpose Clock Input (1 in 2A) & two General Purpose Clock Output (LVDS/SE).
• Since 3D,3E & 3F banks are available only in some version of Arria10 parts, FPGA DDR4 (64bit) can be supported only in SX480/GX480 or higher.
Power Regulators
Power to Peripherals
DDR4 (64bit) DDR4 RAM(Op�onal)
Bank 3D,3E,3F
NANDNAND -1GB(Op�onal)
NAND
High Speed Transceiver(2 Channels from Bank 1E)
SPISPIM0
SOM
High Speed Conenctor2
(240Pin)
USB OTG
Gigabit Ethernet
FPGA/HPS JTAG Header
FAN Header5V
Power IN (Op�onal)
5V
Board to Board