©2018 Riptide - Put Your Facilities on Autopilot. All rights reserved. riptideio.com

ProcessorIntel® Atom™ E3805 dual core

Speed / Cache1.33 GHz / 1 MB

I/O1 x 10/100 Fast Ethernet (RJ-45) with PoE (15.4W)Serial Interfaces: 2 x RS-232/422/485.GPIO Multi-function I/O: 0-5V, 8 channel, independently programmable, DAC, ADC. Optional ZigBee module.

I/O (All models)USB: 1x USB 2.0, 1x USB 3.0Integrated MEMS: Accelerometer, Pressure, Temperature and HumidityIntegrated GPSWireless LAN: 2.4GHz, 802.11b/g/n/Bluetooth Low Energy 4.0Optional zigbee on 3001WWAN/Cellular: 3G or 4G LTE for select countries, US/Canada 4G LTE with AT&T or Verizon(WWAN card is factory installed only)Antenna ports for: Wi-Fi/BLE/GPS, 3G or 4G

Dimensions125 mm wide x 125 mm high x 51 mm deep (4.9 x 4.9 x 2 inches)

Weight1 kg +/- 0.02 kg (2.2lbs +/- 0.04lbs)

Form FactorFanless and headless. Mounting optimized for 75x75mm VESA, wall (standard) mounting and DINrail mounting. Additional mounting options include perpendicular DIN-rail mount, quick- release DINrail mount, and cable management control bars for standard mounting.

EnvironmentalsRuggedized (shock and vibration resistant) for challenging environments. IP50 rating.Operating Temperature2: -30C (-22F) to 70C (158F)* - true still air environment, no forced air orairflow required inside a sealed enclosure).Storage Temperature: -40C (0% RH) to 70C (20% RH)Relative Humidity: Operating: 10% to 95% (non-condensing)

Storage/DrivesIndustrial-grade Micro-SD card: 8GB / 16GB / 32 GB / 64 GB. Embedded multi-media controller(eMMC): 8GB standard / 32GB option with WWAN.

Memory2 GB, DDR3L – 1066 MHz

Operating FrameworkUbuntu Core 16 with Riptide Hub software

Riptide HubOn site gateway device for connecting to VRF Gateway and other integrated devices

Compatible with the following Daikin VRV ModelsFXAQ, FXDQ, FXEQ, FXFQ, FXHQ, FXLQ, FXMQ, FXMQ_MF, FXNQ, FXTQ, FXUQ, FXZQ, VAM, VRV4S1, VRV4S2, VRV-3S, VRV-3P, VRV4S3, VRVX, VRV4-EU, VRV-3R, VRV3C, VRV-4R, VRV-M

System Hardware Components

Riptide Edge

Universal VRF GatewayTranslator of DIII-Net protocol connected to Daikin VRV via F1F2 Out

Notes1. Ambient temperature specification is based on free air environment and recommended mounting2. 2.5inches (63.5mm) open space around the device is recommended for air circulation3. Actual maximum operating temperature depends on variables including airflow, mounting, and orientation4. Temperature measured at the center of exposed heatsink base surface shall not exceed 83C

©2018 Riptide - Put Your Facilities on Autopilot. All rights reserved. riptideio.com

I/OInterfaces via RS232 (ASCII), RS485 (MODBUS RTU), Ethernet (ASCII & MODBUS IP)

Dimensions156 mm wide x 90 mm high x 34 mm deep (6.1 x 3.5 x 1.3 inches)

Weight1 kg +/- 0.02 kg (2.2lbs +/- 0.04lbs)

Form FactorFanless. Mounting optimized for wall (standard) mounting and DIN-rail mounting

Power InputAC Power supply adapter included. 12V DC out; 100V-240V AC 50/60hz inOption for direct DC power supply. 12V-24V DC

Universal VRF Gateway

Wiring Diagram

Continuous Monitoring and ControlIndoor & Outdoor Units: Change set points, get diagnostic data, monitor and control indoor and outdoor units.

Building Integration: Bring together other systems and buildings in a single interface; supports BACnet, Modbus and many proprietary protocols.

Features/Benefits

Field Alerts & NotificationsGet Alerts: We monitor more than 80 system data points and alert when any alarm conditions are detected.

Get Notified: If an alert condition is detected, an authorized service tech can be notified via text or email for quick maintenance response to reduce any potential downtime.

Riptide and Daikin VRV – iTouchManager Addressing

The Riptide system communicates with the Daikin VRV and other manufacturers’ equipment to allow for remote management via web and mobile. In order for the Riptide system to communicate with the Daikin VRV iTouchManager, the system requires the following addressing: iTM needs to be addressed as follows: IP address: 192.168.1.102 Subnet: 255.255.255.0 Gateway: 192.168.1.1

PR

OJE

CT

AD

DR

ES

PR

OJE

CT

CIT

Y, S

TATE

SC

ALE

RE

VIS

ION

S

NO

.D

ATE

DE

SC

RIP

TIO

N

FILE

NA

ME

DR

AWN

TITL

E

DAT

E C

RE

ATE

D

315

Mei

gs R

oad,

#A1

10Sa

nta

Barb

ara,

CA

9310

9Ph

one

(805

) 965

-365

9Fa

x (7

75) 3

68-4

273

0

Background-1

Riptide

08/0

4/16

N/A

Anyw

here

usa

Anyw

here

, usa

Ript

ide

Base

Kit

Ript

ide

AirR

eps O

ED P

anel

Shaw

n Le

imbr

ock

16of

Duplex Outlet

5 Port Ethernet SwitchTL-SG105

X XX XX X

X XX XX X

X XX XX X

X XX XX X

Dell Edge Gateway 3001

2.5A DCPower Supply

MDR-60-24

16 x 16 Perf Panel

L1

+-

F1F2L2

IOIOI1

IOIOI2 +-

F1F2

F1F2F1F2

For cellular deployments mount Cradlepoint Modem external of enclosure and connect to switch port

Daikin DIII F1F2

BACnet MS/TP

Modbus/Other

Daisy chain from iTM to Riptide terminal blockSee iTM Installation Manual section 2.2.2 for cable requirements

iTM Connections and Conceptual Diagram

iTM Rear Face

DIII Communication Line

Cradlepoint COR IBR200 Quick Start  

Purpose of Cradlepoint Cellular Router Lbrands has approved installation of the Cradlepoint cellular router to provide remote, internet-based access to the Trane SC Controller. The device will give remote technicians secure access to the controller via a Netcloud Perimeter VPN and authorized log on credentials.   

What’s Included 

 Mounting and powering 

1. The device has been shipped pre-configured, with SIM already installed. Do 

not remove SIM. Reseat SIM only if it is no longer in its slot. 

2. Connect modem antennas (finger tight only). Do not connect WiFi antennas 

as this device will be used for wired connection only (see device image 

below).

1 

 

3. Plug the power supply into an electrical outlet (see device image below). 

 

4. Using the signal strength indicator, find a location within cable reach of the 

network switch with a strong signal. Determine signal using the following 

guide: 

www.riptideio.com Email: support@riptideio.com    2 Phone: (805) 318-3215   

 

5. (Optional) Mount the device onto a wall or backing using the D5.2 holes 

shown below 

   

6. Using an ethernet cable, plug the Cradlepoint IBR200 cellular router into the 

port for Ethernet connection 1 on the Trane SC Controller (#10 on below). 

www.riptideio.com Email: support@riptideio.com    3 Phone: (805) 318-3215   

 

 

FOR TECHNICIAN - Download and install NetCloud 

Client software  NetCloud Perimeter is a secure, invitation-only software download deployed that will connect the user to the Cradlepoint router for remote, internet based access. Technicians who will connect to equipment (e.g. Trane SC controller) remotely will need to download and install the software as follows:  

1. From a browser, navigate to here: https://cradlepoint.com/downloads 

2. Choose your download based on your device type (Windows, Mac, iOS, 

Android, etc.) 

3. Follow instructions on screen to install the software. 

4. Log on using credentials provided by Riptide. You're done! 

 

www.riptideio.com Email: support@riptideio.com    4 Phone: (805) 318-3215   

Reference - LED Indicators 

Use the chart below to verify that device has an established cellular connection.  

  

www.riptideio.com Email: support@riptideio.com    5 Phone: (805) 318-3215