Thanks to the customizable advanced computer controls of the Symphony™ II Power Management System you have the flexibility to manage your whole house power, including up to 8 high wattage appliances, with a smaller generator. This means less fuel consumption, less overall expense, and lower emissions.

Available with every Home Generator by GE, the system’s simple, expandable remote controls allow you to pinpoint your unique power requirements, and ultimately achieve affordable whole house comfort when the power goes out. Your home’s performance can continue… without pausing for an intermission.

To learn more, visit www.ge.com/generatorsystems

Energy Efficient Automatic Home Generator Systems

Symphony™ II Power Management System

When the Power Goes Out, the Performance Goes On

071048 071049 071054†

Common Features 2 Poles, 60Hz Frequency, Nema 3R, UL 1008 Listed

Power ManagementWhole House Symphony™ II Power Management System

Remote power modules supported (sold separately)

8 maximum & lock-out’s

Power Management Monitor (sold separately)

Plug-in style, provides constant status of system and controlled loads/appliances

Amps 100A 200A 200A

Voltage 120/240V

Service EntranceDisconnect*

Yes

*Review local codes to determine if a transfer switch with separate service entrance disconnect is required.† For Liquid Cooled Home Generators by GE

www.ge.com/generatorsystems 1-888-575-8226

The Symphony™ II Power Management System computer continually monitors your home’s connection to local utility power. When a power outage occurs, the system immediately senses it, automatically starts your generator and quickly switches your home to backup power to maintain essential power needs.

The advanced Symphony™ power controls then go to work, seamlessly communicating with the modules to manage up to eight high-wattage appliances. The Symphony™ II measures your generator’s power output and automatically turns each high-wattage appliance on or off as power becomes available.

Establish Your Own Smart Grid.How Does the Symphony™ II Power Management System by GE Work?

For appliances that require extra initial start-up power, such as central air conditioning units, the system waits until that appliance is running and its power needs drop before turning on other high-wattage appliances.

1

2

3

When utility power is restored, the system automatically connects your home back to the grid, shuts the generator down and resumes monitoring your home’s connection to local utility power.

4

Briggs & Stratton Corp. reserves the right to make changes in specifications and features shown

herein, or discontinue the product described at any time without notice or obligation.

GESB0040-1/12

Is a trademark of General Electric Company and is under license by Briggs & Stratton CorporationPost Office Box 702Milwaukee, WI 53201 USA

Assembled in USA

Symphony™ II computer controls provide an efficient and affordable solution to manage whole house backup power.

• Just Right Sizing – You choose which high-wattage appliances your family will want to have available during a power outage and prioritize those appliances based on your family’s needs and lifestyle.

• Less Costly Installations – The system utilizes remote power modules that are easily installed directly to the existing home wiring. Installations therefore require less new wiring, take less time, and cost less than typical systems.

• Smaller Footprint – The systems unique ability to manage more items results in a compact, quiet, more affordable generator system.

• Consumes Less Fuel – Managing more high wattage items with a smaller generator and engine can result in less fuel consumption than a larger, more expensive generator.

Home Energy Profile – Proper sizing starts by determining each home’s unique energy footprint, and GE in cooperation with Briggs & Stratton has developed a home energy profile assessment for consumers that will identify the best solution for their home.

1

2

3

4

What’s a transfer switch? Usually installed outside next to your electric meter or inside right next to your circuit breaker box, a transfer switch is the brains behind your generator system. Its only job is to sense when your power is out and “switch” it to and from your generator.

What’s a module? The Symphony™ II modules communicate via existing wiring with your generator. The modules can be placed anywhere throughout the home for a customized installation. The Symphony™ II Power Management System includes 1 or 2 modules (model dependent), which should be sufficient for most homes, allowing you to manage up to 8 high-wattage appliances!

One Plus One Equals OneThe new Dual 200 Amp Transfer Switch/Split 400 Amp replaces the need for two 200 amp transfer switches in standard split 400A service homes with two 200A distribution panels. It’s a convenient and a�ordable solution to manage whole house backup power for larger homes and businesses.

First In Its Class – Never seen before automatic transfer switch technology only compatible with Generator Systems by GE.

Easy Installation – The system uses one less transfer switch requiring less wiring, less time and expenses than typical installations. Plus factory pre-wired generator power distribution inside the transfer switch simpli�es installation.

Smaller Footprint – Combining two automatic transfer switches into one, the Dual 200 Amp Transfer Switch/Split 400 Amp results in a smaller, cleaner looking installation for your customer.

UL Listed – The Dual 200 Amp/Split 400 Amp is a UL listed solution for two 200 amp service breakers. The 400 amp utility service can be split and connected directly to each service disconnect breaker in the transfer switch. Each circuit then feeds separate 200 amp distribution panels.

To learn more – visit www.ge.com/generatorsystems or call 1-888-575-8226

*Review local codes to determine if a transfer switch with separate service entrance disconnect is required.

Model Number

071057

** Model 071057 Transfer Switch will only be sold as a bundle with a GE 20kW, 30kW and 48kW generator

Common Features 120/240 Voltage, 2 Poles, 60 Frequency, NEMA 3R, UL 1008 Listed

Power Management Method

Whole House Symphony™ II – Advanced Symphony™ II Power Management systems provide the �exibility to manage whole house power, including up

to 8 high wattage appliances, with a smaller generator

Circuits Whole House

Amps 2 X 200A

Service Entrance Disconnect* Yes

Dimensions (L x W x H) 37” x 7” x 23.7”

Weight 111 lbs.

Briggs & Stratton Corp. reserves the right to make changes in speci�cations and features shown

herein, or discontinue the product described at any time without notice or obligation.

Is a trademark of General Electric Company and is under license by Briggs & Stratton CorporationPost O�ce Box 702Milwaukee, WI 53201 USA

Assembled in USA

Only Sold With a Generator System by GE **

Dual 200A / Split 400A Transfer Switch