sym cruisym 125i-300i '18 - shad · 2019. 4. 17. · sym cruisym 125i-300i '18 kit top...

2
SYM CRUISYM 125i-300i '18 KIT TOP S0CR38ST Do not fully tighten the screws until it is ensured that the KIT is correctly attached and aligned. No apretar los tornillos del todo hasta asegurarse que el KIT está correctamente colocado y alineado. Ziehen Sie die Schrauben nicht ganz fest, bevor Sie sich nicht vergewissert haben, daß der Bausatz korrekt eingestellt und ausgerichtet ist. Non stringere del tutto le viti fin tanto non si è sicuri che il kit è collocato correttamente e allineato. Ne pas serrer les vis avant d’être sûr que le KIT est correctement monté et ajusté. WARNING!

Upload: others

Post on 09-Mar-2021

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SYM CRUISYM 125i-300i '18 - Shad · 2019. 4. 17. · SYM CRUISYM 125i-300i '18 KIT TOP S0CR38ST Do not fully tighten the screws until it is ensured that the KIT is correctly attached

SYM CRUISYM 125i-300i '18KIT TOP S0CR38ST

Do not fully tightenthe screws until it isensured that the KITis correctly attachedand aligned.

No apretar los tornillosdel todo hasta asegurarseque el KIT estácorrectamente colocado yalineado.

Ziehen Sie die Schrauben nichtganz fest, bevor Sie sich nichtvergewissert haben, daß derBausatz korrekt eingestellt undausgerichtet ist.

Non stringere del tuttole viti fin tanto non si èsicuri che il kit ècollocato correttamentee allineato.

Ne pas serrer les visavant d’être sûr quele KIT estcorrectement montéet ajusté.

WARNING!

Page 2: SYM CRUISYM 125i-300i '18 - Shad · 2019. 4. 17. · SYM CRUISYM 125i-300i '18 KIT TOP S0CR38ST Do not fully tighten the screws until it is ensured that the KIT is correctly attached

SYM CRUISYM 125i-300i '18KIT TOP S0CR38ST

www.shad.esREF. 500479 Edición 2ª