syllabuspunjabiuniversity.ac.in/syllabi/old syllabi [for... · web viewordinances and outlines of...

PUNJABI UNIVERSITY PATIALA

ORDINANCES

AND

OUTLINES OF TESTS,

SYLLABI AND COURSES OF READING

FOR

B.Sc. (Computer Maintenance)

Part-I (Annual)

FOR

2010, 2011 AND 2012 EXAMINATIONS

ORDINANCES

FOR B.Sc in Computer maintenance (B.C.M )

(UNDER THE +3 SCHEME)

Notwithstanding the integrated nature of a course spread over more than one academic year, the Ordinances in force at the time a student joins a course shall hold good only for the examination held during or at the end of year. Nothing in these ordinances shall be deemed to debar the University from amending the ordinances subsequently and the amended ordinances, if any, shall apply to all the students whether old OR new.

1. As the course is divided into three Parts (Part-I, II and III), the instructions will be spread over three years and the medium of instructions for the Course shall be English. The annual examination for each Part will be conducted in the month of April or as fixed by the Academic Council. 2. Candidate shall be required to complete the B.C.M. Course in a maximum period of six years.3. The supplementary examination shall be held in September or as fixed by Academic Council. This examination shall be open to candidates who have been declared ‘reappear’ in one subject.4. The examination in Part-I ,Part-II and Part-III shall be open to a person who satisfies the requirements at ‘A’ and ‘B’. ‘A’

FOR B.C.M. Part-I Examination

Candidates should have passed at least one academic year previously the +2 examination of Punjab School Education Board or any other examination recognized as equivalent thereto with any subjects.

FOR B.C.M. Part-II Examination

Has passed, at least one academic year previously the B.C.M.-I examination of this university or any other statutory University.

ORHas been declared to reappear in not more than one subject in B.C.M. Part -I examination of this university or any other statutory University but such a candidate shall have to clear the reappear paper in the supplementary examination of the same year or simultaneously with B.C.M. Part-II annual examination failing which his results for B.C.M. part-II examination shall also stand cancelled. For the purpose of awarding degree to the candidates who have passed their B.C.M. Part-I examination from other University, their marks in B.C.M. Part-I examination shall be increased/decreased proportionately to bring them at par with the marks of this University. Candidates who have passed B.C.M. Part-I examination from any other University shall be awarded the degree after raising/reducing proportionately the marks secured by such a candidate in B.C.M. Part-I examination with a view to bringing his score at par with the marks allotted to the respective subject (s) in the corresponding examination of this university.

B.C.M. Part-III Examination

Has passed one academic year previously B.C.M. Part-II examination of this university or any other statutory University.

Note: A candidate who passes B.C.M. Part-I examination in supplementary Exam. With a special chance cannot appear in the next subsequence annual examination of B.C.M. Part-III.

ORHas been declared to ‘reappear’ in not more than three subjects in B.C.M. Part -II

examination ofthis university or any other statutory University but such a candidate shall have to clear the ‘reappear’ paper in the supplementary examination in the same year or simultaneously withB.C.M. Part-III examination failing which his result for Part-III examination shall also stand cancelled.

'B'

(I) (i) has remained on the rolls of a college admitted to the privileges of the University throughout the academic year preceding the examination,

(ii) is certified by the Principal of the College :

*(a) that during the academic year he has attended in each 'subject not less than 75% of the total number of lectures delivered; (a) lectures periods and (b) practicals / map work periods. (The college shall be required to deliver at least 75% of the total number of periods prescribed for each subject),

(b) that he has obtained in an House Examination at least 33% marks in the aggregate of all the subjects or 25% in each subject. The Principle, at his discretion, may allow a special test to candidates who could not appear in the House examination owing to unavoidable reasons or fail to secure the minimum marks indicated above.

(II) has completed the prescribed course of instruction for the examination but has not appeared or having appeared has failed in the examination. Such a candidate may appear in the subsequent annual examination.

5.The pass and reappear in one subject students of Part I & II from Panjab University and Guru Nanak Dev University shall be treated at par with the corresponding students of this university. The marks secured by such students shall be scaled up/down to the marks allotted to each subject by this University.

The candidates who after passing Part-I and Part-II examination from a college affiliated to some other University, are admitted to Part-II and Part-Ill class in colleges affiliated to this University.__________________________________________________________________________*(i) Every candidate will be required to attend a minimum 75% of lectures/ periods delivered to that class in each paper. Teaching/Seminars/Tutorial/ Guided Library Reading

Period of one hour's duration —1 attendance

Practical one period may beof 2-3 hours duration —1 attendance (Contd/.. on next page)

6. A deficiency in class lecture attendances may be condoned on account of special reasons as provided in the ordinances.

7. Application for admission to the examination shall be made on the prescribed form countersigned by the authorities as mentioned in the relevant ordinances and as specified in the examination form.

8. Amount of examination fee to be paid by a candidate for each part shall be prescribed from time to time.

9. Application for admission to the examination shall be made on the prescribed form countersigned by the authorities as mentioned in the relevant ordinances and as

specified in the examination form.

10. Amount of examination fee to be paid by a candidate for each part shall be prescribed from time to time.

(Contd/.. from last page)

Note : Teaching Weeks in an academic Year =25 Required Credit Hours (CH) per week for student = 25 1 Credit Hour (CH) = I Lectures contact hour (LCH) =1Seminar/Tutorial/Guided Library Reading

Contact Hour (STGRCH) = 2 Practical contact Hours (PCH)

In the Department, where there is separate period for Guided Library Reading, the attendance shall be 75%, like the attendance of each paper and will be " considered like a paper of separate Unit,

(ii) In case of students, whose names are struck off from the rolls due to non-payment of fee, and are admitted later on, their attendance shall not be counted for that period,

(iii) The shortage in the attendance of lectures will be condoned as per rules made by the University from time to time.

11. The last date by which admission forms and fees must reach the Registrar shall be as follows :

Annual Without With late With late With late With lateExamination late fee fee of fee of fee of fee of Rs. 500/- Rs. 1000/- RS. 5,000/- Rs. 10,000/-_

Regular Dec. 31 Jan. 12 Jan. 21 Feb. 10 Feb. 21*Candidates

Private Oct 31 Nov. 30 Dec. 31 Jan. 31 Feb. 21*Candidates

Supplementary July 15 July 31 Aug. 16 Aug. 31 Sept. 7*Examinations

*No Examination Form will be accepted after this date.

12. The medium of examination shall be English except non-English language subjects.

13. Punjab History and Culture in the lieu of Punjabi shall be allowed to the following categories of candidates :

1. Candidates who have passed their Matriculation examination from a School located outside the State of Punjab.

2. Candidates who have passed their Matriculation examination from a School located in the State of Punjab will not be allowed to take up the subject of Punjab History & Culture in lieu of Punjabi Compulsory at the graduate level. This clause will not apply to students covered by clause No. 3 given below.

3. Children of Defence personnel/Para military personnel (serving as well as retired) will be allowed to take up the subject of Punjab History & Culture, provided the father or the mother/guardian (in case father is deceased) of the candidate gives an affidavit that the. candidate has not studied Punjabi at the School level.

14. The minimum number of marks required to pass the examination in each Part shall be 35% in each subject, provided that in subject with practical the percentage shall be required separately in written and practical/map work.

15.The candidate shall also be entitled to grace marks as admissible under the ordinances, relating to the 'Grace Marks'.

16.(i) A candidate who fails in only one subject may be allowed exemption in other subjects and he may clear that one subject in two consecutive subsequent chances i.e. at the supplementary of the same year and failing that at the next annual examination.

(ii) Such a candidate shall not be eligible to join the next higher class or appear in the next examination.

(iii) A candidate passing the examination under Ordinance 15 shall not be eligible for any Scholarship, Prize or Medal.

17. The successful candidates shall be classified on the basis of aggregate marks secured in Part-I, II and III taken together as under :

(a) 75% or more in the first division with distinction.(b) 60% or more in the first division.(c) 50% or more but less than 60% in the second division.(d) Below 50% in the third division.

18.The Registrar shall publish the result of the examination as soon as possible. The successful candidates shall be awarded a degree stating the division, percentage of marks and medium.

19.A person who has passed B.C.M +3 examination from this University may be allowed to reappear as a private candidate in part I, II and III (separately or simultaneously) examination in the same subjects for improving his performance. For this purpose he shall be given two chances within a period of two years for the date of passing B.C.M +3 examination. Such an examination shall be considered minor. Provided that no one has passed an examination higher than M.Sc or equivalent shall be allowed to improve his performance in B.C.M.

SYLLABUSOUTLINES OF PAPERS AND TESTS

B.SC. IN COMPUTER MAINTENANCE

FIRST YEAR EXAMINATIONS YEAR 2010, 2011 and 2012 sessions

CODE NO. TITLE OF PAPER MAXIMUM MARKS

CONTINUOUS

ASSESSMENT

UNIVERSITY

EXAMINATION

TOTAL

MARKS

TIME TOTAL

ALLOWED

BCM-101 Life Skills and Communication Skills

60 40 100 3 Hrs.

BCM-102 Fundamental of IT 20 80 100 3 Hrs

BCM-103 Digital electronics 20 80 100 3 Hrs.

BCM-104 Operating systems 20 80 100 3 Hrs.

BCM-105 Electronics Instruments and Measurements

20 80 100 3 Hrs.

BCM-106 Computer System Architecture

20 80 100 3 Hrs.

BCM-107 Software Lab -I(operating system)

- 50 50 3 Hrs.

BCM-108 Hardware Lab –I (Electronics Instruments and Measurements)

- 50 50 3 Hrs.

Total 160 540 700

Note:1.The break up of marks for the practical will be as under i)Lab record 10 Marksii)Viva voice 10 Marksiii)Program Development and Execution 30 Marks

2.The break up of marks for internal assessment for theory papers will be as under : i)One or two tests out of which minimum one best will be considered for assignment 10 Marks ii)Assignment/Quizzes 5 Marks iii)Attendance, Class Participation and Behavior 5 Marks

BCM-101 LIFE SKILLS AND COMMUNICATION SKILLS

Maximum Marks: 40 Maximum Time : 3 Hrs

Minimum Pass Marks: 35% Lectures to be delivered: 90 Hrs

Objectives: To groom students for IT industry.

Methodology: Practical and Activity Based. No Theory examination.

60% Internal based on class performance and attendance. Internal Evaluation will be done after the completion of each Module.

Testing: Pre and Post Test for each Module, Classroom tasks, Activities, Quiz, Case Studies.

Course Content:

Module I : Writing and Speaking English (30 Hours)

Parts of Speech, Resume Writing, Business Letters

Vowels, Diphthongs, Consonants, Consonant Clusters, Stress, Syllable, Syllabic Division, Connected Speech, Making Presentations

Module II: The Art of Communication (20 Hours)

Verbal Communication: Effective Communication, Effective/Active listening paraphrasing, Feedback

Non Verbal Communication: Personality Enhancement, Body Language

Module III: The Hidden Data of Communication (15 Hours)

The importance of feelings in communication, dealing with feelings, The importance of developing assertive skills, developing self-confidence, developing Emotional Intelligence, Dealing with People,

Module IV: Group Activities and World of Teams (10 Hours)

Importance of Team work, working with Groups, Group Discussions, Group Decision-making

Module V: Getting Ready for Interviews (10 Hours)

Corporate Dressing, Business Etiquettes, Media Etiquettes, Table Etiquettes

Module VI: Ethical Orientation (05 Hours)

Ethical Dilemmas and Choices

Text Book:

1. Infosys Campus Connect Soft Skills Participant Manual, Infosys Technologies Ltd. , Bangalore.

Recommended Books:

1. The Seven Habits of Highly Effective People - Stephen R. Covey.

2. Who Moved My Cheese - Dr. Spenser Johnson.

3. Seven Spiritual Laws of Success - Deepak Chopra.

4. I’m OK Y’ar OK – Erric Seghal

5. Emotional Intelligence - David Goleman

6. Working with Emotional Intelligence - David Goleman.

7. Good To Great - Jim Collins

8. Goal - Eliyahu Goldratt.

9. Only the Paranoid Survive - Andrew Grove

10. All the books in the “Chicken Soup for the Soul” series.

11. “Effective Group Discussion: Theory and Practice” by Gloria J. Galanes, Katherine Adams , John K. Brilhart

12. “Effective Presentation”, 3rd Edition by Ros Jay, Antony Jay published by Pearson

13. Effective Presentation Skills (A Fifty-Minute Series Book) by Steve Mandel

14. EatiQuette’’s The Main Course on Dining Etiquette””: A step-by-step guide to dining with confidence in the 21st Century, by David Rothschild

15. “The Complete Idiot’’s Guide to Etiquette” by Mary Mitchell – Published by Alpha Books

16. “Strategic interviewing” by Richaurd Camp, Mary E. Vielhaber and Jack L. Simonetti – Published by Wiley India Pvt. Ltd

17. Essentials of Effective Communication, Ludlow and Panthon; Prentice Hall of India.

18. Spoken English by V Sasikumar and PV Dhamija; Tata Mc Graw Hill

19. Developing Communication Skills by Krishna Mohan and Meera Banerji; MacMillan India Ltd., Delhi

20. Communication Skills by Ms. R. Datta Roy and K K Dhir, Vishal Publications, Jalandhar

BCM 102: FUNDAMENTALS OF IT

Maximum Marks: 80 Maximum Time: 3 Hrs

Min Pass Marks: 35% Lectures to be delivered: 90 Hours

(A) INSTRUCTION FOR THE PAPER SETTER

The question paper will consist of five section A,B,C,D and E Section A,B,C and D will have two question from the respective section of the syllabus. Section E will consist of 5-10 short answer type questions which will cover the entire syllabus uniformly. All the Sections carry equal marks.

(B) INSTRUCTON FOR THE CANDIDATES

Candidates are required to attempt one question each from the section A, B, C and D of the question paper and the entire section E.

Section A

Introduction: Characteristics of Computers; The Evolutions of Computers; Computer Generations, Classification of computers based on size and application like Notebook Computers; Personal Computers (PCs); workstations; Mainframe Systems; Super Computers; Clients and Servers etc.

Basic Computer Organization: Block diagram of Computer, Interrelationship between different units : Input Unit; Output Unit; Storage unit; Arithmetic Logic Unit; Control unit; Central Processing unit; The System Concept

Processor and Memory: The Central Processing Unit (CPU) The Control Unit, the Arithmetic Logic Unit (ALU), Instruction Set, Registers, Processor Speed, Types of Processors; Main Memory : Memory Organization, RAM, ROM, PROM and EPROM, Cache Memory.

Secondary Storage Devices: Sequential and Direct-Access Devices; Magnetic Tape, Hard Disk, Optical Disks : Basic principles of Operations, Advantages and limitations;

Section B

Types of Software: system Software, Application Software; Overview (function) of different types of system softwares :Operating Systems, Language Translators, utility Programs, and Communication Software. Overview of different types of Application Software: word Processing, spreadsheet, Database, graphics Personal assistance, Education, entertainment Software.

Input-output Devices: Characteristics of I/O devices. Input Devices (Keyboard Devices, Point-and –Draw Devices, Data scanning Devices, Digitizer, electronic Card reader, Voice Recognition Devices, Vision-Input System); output Devices (Monitors, printers, plotters, Screen Image Projector, Voice Response System).

Section C

Computer languages: Analogy with Natural Languages; Machine Language (Advantages and Limitations Of Machine Language); Assembly Language (assembler, Advantages Of Assembly Language over Machine Language, Limitations Of Assembly Language, High

Level Language (Compiler, Linker, Interpreter, Advantages and Limitations of High Level Languages); Object Oriented Programming Languages; Characteristics of Good Programming Language; Selecting a Language for Coding and Application; Subprogram. application Software Packages: Word-Processing Packages(What it is?), Commonly Supported Package (What it is?, Commonly Supported features).

Section D

Network : Definition, types, objectives. Internet : Definition, Application domain, features. Impact of IT in different domains like railways, Airline, Banking, Insurance, Inventory Control, Hotel Management, Education, Video games, mobile phone, E-commerce, weather forecasting, Scientific application, Multimedia, entertainment.

REFERENCES

1. D. H. Sanders, “Computers Today”, McGraw Hill, 1988.

2. Satish Jain , " Information Technology", BPB, 1999.

3. David Cyganski, John A. Orr, “ Information Technology Inside and Outside” Pearson

Education, 2002.

4. V. Rajaraman, “Fundamentals of Computers” (2nd edition), Prentice Hall of India, New

Delhi, 1996.

1. B. Ram, “Computer Fundamentals”, Wiley, 1997.

2. Chetan Srivastva, "Fundamentals of Information Technology", Kalayani Publishers, 2003.

BCM 103: DIGITAL ELECTRONICS


Min Pass Marks: 35% Lectures to be delivered: 90 Hrs


The question paper will consist of five section A,B,C,D and E. Section A,B,C and D will have two question from the respective section of the syllabus. Section E will consist of 5-10 short answer type questions which will cover the entire syllabus uniformly. All the Sections carry equal marks.

(B) INSTRUCTION FOR THE CANDIDATES

Candidates are required to attempt one question each from the section A, B, C and D of the question paper and the entire section E

Section -A

Number Systems, Arithmetic Operations, and Codes: Introduction, Binary, Octal and hexadecimal number system, Conversions from one number system to another. Number Representation: Sign-Magnitude representation, (r-1)’s Complement Representation, r’s Complement Representation. Arithmetic Operations: Addition, Subtraction, Addition and Subtraction using r’s and (r-1)’s Complements Arithmetic, Multiplication and Division. Binary codes: BCD code, Gray code, Excess 3 code, Alphanumeric Code, Error detecting code

Logic Gates and Boolean Algebra: Introduction, AND, OR, NOT, NAND, NOR, Exclusive OR and Exclusive NOR, Implementations of Logic Functions using gates, NAND –NOR implementations, Basic Laws of Boolean Algebra, De Morgon’s Theorems, sum of products and product of sums, Minimization Techniques: Boolean Algebraic method, Karnaugh Map techniques (One variable map, Two variable map, Three variable map, Four variable map).

Section – B

Logic families: Resistor Transistor Logic (RTL), Diode Transistor Logic (DTL), Transistor Transistor Logic (TTL), Emitter Coupled Logic (ECL), Comparison of Logic families.

Combinational Logic Circuits: Introduction, Design of Combinational Circuits, Adders, Subtractors, Encoders: Octal to Binary, Gray to Binary, BCD to Excess-3, Decoders: BCD to 7-segment, Binary to gray code, Multiplexers, Demultiplexer.

Section - C

Sequential Circuits: Introduction, Flip flops, Types of Flip flops (SR, D, JK, T), Edge triggered of Flip flops. Counters: Asynchronous/Ripple Counter, Synchronous Counter (Mod-5 Counter, Mod-10 Counter), Up/Down Counter, Ring Counter. Shift Registers: Serial-in Serial-out, Serial-in-Parallel-out, Parallel-in-Serial-out, Parallel-in-Parallel-out Shift registers.

Section - D

D/A and A/D Converters: Introduction, Weighted register D/A converter, binary ladder D/A converter, steady state accuracy test, D/A accuracy and resolution, parallel A/D converter, Counter type A/D converter, Successive approximation A/D converter. Single and dual slope A/D converter, A/D accuracy and resolution.

Digital Memories: Introduction, Memory organisation, Classification and characteristics of memories, ROMs, R/W memories. Content addressable memories. Programmable logic arrays, Magnetic Bubble Memories, Charged-Coupled device memory.

REFRENCES:

1. William Stallings, " Computer Organisation and Architecture", 6th edition, Pearson Education , 2002.

2. A.S.Tannenbaum, “Structured Computer Organisation”, Prentice- Hall of India, 1999

3. M.M. Mano, “Computer System Architecture”, Third Edition , Prentice-Hall of India, 2002.

BCM 104: OPERATING SYSTEMS

Maximum Marks: 80 Maximum Times: 3 Hrs




(B) INSTRUCTION FOR THE PAPER CANDIDATESCandidates are required to attempt one question each from the section A, B, C and D of the question paper and the entire section E.

S ection A

Introduction to Operating System : needs, Objectives, services.

Operating System Classification(definition, basic concepts, advantages and limitations) – single user, multi user, simple, batch processing, multiprogramming, multitasking, parallel systems, distributed systems, real time systems.

Process management : process concept, process control block, process scheduling.

Section B

Memory management : Logical versus physical address space, swapping, memory management with fixed and variable number of tasks, paging and segmentation technique, concepts of virtual memory (Overview only)

File Management : file concept, access methods, directory structure, file protection, allocation methods : contiguous, linked and index allocation.

Section C

DOS: Booting process, AUTOEXE.BAT, different internal and external commands, Hardisk Partitions.

WINDOWS XP: Installation of Windows XP, My Computer, Recycle Bin, Various Control panel options, Basic elements of Windows, Print Manager, Window Applications, accessories etc.

Section D

UNIX : Introduction, History, Features, Comparison with Windows, file system, Setting File Permission, Unix commands, super user.

Books:

1. Silberschatz and Galvin, "Operating System Concepts", Sixth edition, Addison-Wesley publishing, Co., 1999.

References:

1. Hansen, Per Brinch, "Operating System Principles", Prentice-Hall. 1984.

2. Infosys Campus Connect Foundation Program Volume:1 – 3, Education & Research Department, Infosys Technologies Ltd , Bangalore.

BCM 105: ELECTRONICS INSTRUMENTS AND MEASUREMENTS



(A)INSTRUCTION FOR THE PAPER SETTER

The question paper will consist of five section A,B,C,D and E Section A,B,C and D will have two question from the respective section of the syllabus. Section E will consist of 5-10 short answer type questions which will cover the entire syllabus uniformly. All the Sections carry equal marks.

(B) INSTRUCTON FOR THE CANDIDATES

Candidates are required to attempt one question each from the section A, B, C and D of the question paper and the entire section E.

Section A

Basic of measurements:- Review of performance specification of instruments- accuracy, precision, sensitivity, resolution range etc. Error in measurement and loading effects.

Measuring instruments:- Working principles and construction of ammeters and voltmeters (moving coil and moving iron type), difference between ammeter and voltmeter, extension of their range and simple numerical problems. Principle and working of: Wattmeter (dynamo-meter type).

Section B

Multimeter:- Construction & various functions of multimeter & the various measurements that are made using multimeter, Specification of multimeter & their significance and its limitations.

Electronic voltmeter:- Advantages over conventional multimeter for voltage measurement with respect to input impedance and sensitivity.

Digital Voltmeter & Digital Multimeter:- Block diagram of DVM (digital voltmeter) & Digital Multimeter, Specification of digital multimeter.

Section C

Cathode Ray Oscilloscope:- Block diagram & explanation of basic CRO, construction of CRT, Electron gun assembly, Electrostatic focusing & acceleration (explanation only no mathematical treatment), Time base operation & need for blanking during fly back, Front Panel Controls of CRO, Applications of CRO.

Digital Storage Oscilloscope (DSO):- Block diagram & principle of working; Comparison between Analog and Digital Storage Oscilloscope.

Signal Generators And Analysis Instruments: - Attenuators and its various types, Radio frequency (RF) oscillators: Colpitt’s Oscillator, Hartley Oscillator, Wave Analyser, Spectrum Analyser.

Section D

Transducer: - Classification of transducers, qualitative treatment of Strain Guage, Various types of transducers: Capacitive transducer, Inductive transducer, Oscillation transducer, Piezoelectric transducer. Linear Variable Differential Transducer (LVDT), Thermistors and its applications, Thermocouples.

Data Acquisition: - Recorders & its necessity, Basic knowledge of graphic recorders, strip chart recorders, magnetic tape recorders & digital type recorders.

REFERENCES

1. "Electronics Measurement and Instrumentation" by AK Sawhney, Dhanpat Rai and Sons, New Delhi.

2. "Electronics Instrumentation" by JB Gupta, Satya Prakashan, New Delhi.3. "Elements and Electronic Instruments and Measurement", Carr Pearson.4. Malvino A.P and Leach ,“Digital Principles and Application”,TMH.5. Morris Mano ,”Computer System Architecture”, PHI.

BCM-106: COMPUTER SYSTEM ARCHITECTURE


Min Pass Marks: 35% Lectures to be delivered: 90 Hrs

(A)INSTRUCTION FOR THE PAPER SETTER


(B) Instruction For The CandidateCandidates are required to attempt one question each from the section A, B, C and D of the question paper and the entire section E

Section - A

Principles of Computer Design: Types of computer organization, Classification of computer architectures, Non-von Neumann machine: Flynn’s classification, Classification of Computer architecture design,

Register Transfer and Microoperations: Register transfer language, Bus and memory transfer, arithmetic mocrooperations, Logic microoperations, shift microoperations.

Section - B

Basic Computer Organization: Basic Components of a digital computer, instruction codes, Computer registers, Computer instructions, Timing and control, Instruction cycle, Input-output and interrupt.

MICRO-PROGRAMMED CONTROL: Machine language, Assembly Language, Assembler, Control Memory, Address Sequence & Design of Control Unit.

Section – C

CENTRAL PROCESSING UNIT: Introduction, general register organization, Stack organization, Instruction formats, Addressing modes, Data transfer, Program control RISC/CISC: Introduction to RISC/CISC, design characteristics

Section – DInput -Output Organization: Peripheral Devices, Input-Output interface, Different modes of communication : synchronous, asynchronous, simplex, duplex, serial and parallel. Data transfer modes : Priority Interrupt, Direct Memory Access (DMA). Memory Organization: Memory Hierarchy, Main Memory, Auxillary Memory, Associate Memory, Cache Memory, Virtual Memory.

REFERENCES:

1. William Stallings, "Computer Organisation and Architecture", 6th edition, Pearson Education , 2002.

2. A.S.Tannenbaum, “Structured Computer Organisation”, Prentice- Hall of India, 1999

3. M.M. Mano, “Computer System Architecture”, 3rd Edition,Prentice-Hall of India, 2002.

BCM 107: SOFTWARE LAB-I (OPERATING SYSTEM)



This laboratory course will comprise of exercises to supplement what is learnt under paper BCM-104

BCM 108: HARDWARE LAB-I (ELECTRONICS INSTRUMENTS AND MEASUREMENTS)



This laboratory course will comprise of exercises to supplement what is learnt under paper BCM-105

syllabuspunjabiuniversity.ac.in/syllabi/old syllabi [for... · web viewordinances and outlines of...

Documents