svf torque tables
TRANSCRIPT
-
8/11/2019 SVF Torque Tables
1/7
I N C O R P O R A T E D
SVFFlow Controls Torque
07.15.201
Tables
VALVE OPERATING TORQUE TABLES
Document: SVF_Torque_Ta
SVF Flow Controls, Inc. 13560 Larwin Circle Santa Fe Springs, CA 90670 Tel: 1.800.783.7836 FAX: 562.802.3114
[email protected] [email protected] Visit our website: www.SVF.net Specifcaons subject to change without noce
Definition of Valve TorqueThe purpose of this manual is to provide a simple yet accurate procedure for sizing actuators to
SVF ball valves. By properly sizing an actuator to a valve for a specific application, performance is
guaranteed and economics are gained.
VALVE TORQUE Before the actuator can be sized for any given valve application, the amount of torque
required by the valve must be determined. The operating torque of the ball valve is influenced by a
number of factors, some are design and material related, others are application (service condition)
related. Design related factors include the type and material of the valve seats. Application factors
include system pressure, media, and frequency of operation.
The torque required to operate a ball valve comes from two different areas within the valve, in both
cases resulting from friction between metal and relatively soft sealing materials. The two areas in thevalve that create torque are the stem and ball/seat.
STEM TORQUE is primarily dependent upon the tightness of the stem nut. Proper adjustment of the
stem nut is important to valve performance and life. If the nut is too loose, the valve exhibits stem
leakage; if the nut is too tight, the total torque requirement can be increased to the point where the
actuator may not be powerful enough to cycle the valve. The design of SVF ball valves is such that
the stem torque is constant, i.e. it is not influenced by operation conditions.
BALL/SEAT TORQUE is created by the friction between the ball and seat and is very sensitive to service
conditions. The floating ball design concept allows the system pressure to force the ball into the
downstream seat. The higher the system pressure, the harder the ball is forced into the seat and,therefore, the higher the torque. Since different seat materials have different coefficients of friction,
the ball/seat torque also becomes a function of the seat materials being used.
Valve torque is also a function of the media flowing through the valves. Abrasive media have a
tendency to increase the amount of friction between ball and seats, whereas some light oils, which
provide additional lubricity, can reduce the amount of torque required.
The torque required to operate a ball valve is maximum
at the beginning of opening. This is due to change in
the ball surface that is in contact with seats. The ball
surface contact with the seats is greatest when the
valve is closed.
A typical ball valve torque characteristic is demonstrated
in the graph shown on the left. Closing torque is about
80% of the opening or breakaway torque for the
softer resilient seats. For harder seats such as PEEK,
the opening and closing curves are nearly identical.
Torque curves in this publication are based on opening
curves.
RUNNING TORQUE
CLOSING TORQUE
OPENING TORQUE
CLOSED OPEN
TORQUE
-
8/11/2019 SVF Torque Tables
2/7
-
8/11/2019 SVF Torque Tables
3/7
I N C O R P O R A T E D
SVFFlow Controls Torque
07.15.201
Tables
VALVE OPERATING TORQUE TABLES
SVF Flow Controls, Inc. 13560 Larwin Circle Santa Fe Springs, CA 90670 Tel: 1.800.783.7836 FAX: 562.802.3114
[email protected] [email protected] Visit our website: www.SVF.net Specifcaons subject to change without noce
Document: SVF_Torque_Ta
SIZE
1/43/81/23/411-1/41-1/22
in-lbf
45454545100130280360
Nm
555511153241
D8
in-lbf
50505050150175450600
Nm
666617205168
in-lbf
5050506090300375675
Nm
666710344276
in-lbf
50505075100150175275
Nm
666811172031
SIZE
1/43/81/23/411-1/41-1/222-1/23
in-lbf
454545451001302803605601000
Nm
55551115324163113
R89
in-lbf
5050506090300375675
--
Nm
666710344276--
in-lbf
50505075100150175275
--
Nm
666811172031--
Series 8continued
TFM1600 Seat Torque SupraLonTMSeat Torque DelrinSeat Torque UHMWPE Seat Torque
TFM1600 Seat Torque DelrinSeat Torque UHMWPE Seat Torque
-
8/11/2019 SVF Torque Tables
4/7
I N C O R P O R A T E D
SVFFlow Controls Torque
07.15.201
Tables
VALVE OPERATING TORQUE TABLES
SVF Flow Controls, Inc. 13560 Larwin Circle Santa Fe Springs, CA 90670 Tel: 1.800.783.7836 FAX: 562.802.3114
[email protected] [email protected] Visit our website: www.SVF.net Specifcaons subject to change without noce
Document: SVF_Torque_Ta
SIZE
1/43/81/23/411-1/4
1-1/22
in-lbf
45454545100130
280360
Nm
55551115
3241
TFM1600 Seat TorqueC8
Series 8continued
SIZE
1/23/411-1/41-1/22
in-lbf
4545100130280360
Nm
5511153241
TFM1600 Seat TorqueF8
SIZE
1/43/81/23/411-1/4
1-1/222-1/2
in-lbf
454545100130280
3605601000
Nm
555111532
4163113
TFM1600 Seat TorqueFB8
SIZE
1/43/81/23/411-1/41-1/222-1/23
in-lbf
505050501501754506009251500
Nm
666617205168105170
SupraLonTMSeat TorqueN8
SIZE
1/23/411-1/41-1/222-1/2
in-lbf
501501754506009251500
Nm
617205168105170
SupraLonTMSeat TorqueBN8
SIZE
1/43/81/23/411-1/41-1/222-1/23
in-lbf
454545451001302803605601000
Nm
55551115324163113
TFM1600 Seat Torque SupraLonTMSeat TorqueRJ8
in-lbf
505050501501754506009251500
Nm
666617205168105170
-
8/11/2019 SVF Torque Tables
5/7
I N C O R P O R A T E D
SVFFlow Controls Torque
07.15.201
Tables
VALVE OPERATING TORQUE TABLES
SVF Flow Controls, Inc. 13560 Larwin Circle Santa Fe Springs, CA 90670 Tel: 1.800.783.7836 FAX: 562.802.3114
[email protected] [email protected] Visit our website: www.SVF.net Specifcaons subject to change without noce
Document: SVF_Torque_Ta
SIZE
1/23/411-1/222-1/234
in-lbf
606010020025045013001400
Nm
7711232851147158
TFM1600 Seat TorqueSB7 CleanFLOW TM
SIZE
1/23/411-1/222-1/234
in-lbf
10014021049052090014001500
Nm
1116245559102158170
TFM1600 Seat TorqueSBC7
SIZE
1/23/411-1/22
in-lbf
6060100200250
Nm
77112328
TFM1600 Seat TorqueSB7F
SIZE
1/23/411-1/22
in-lbf
100140210490520
Nm
1116245559
TFM1600 Seat TorqueSBC7F
SIZE
1/23/411-1/222-1/234
in-lbf
4453931952834347171080
Nm
561122324981122
TFM1600 Seat TorqueSB9SIZE
1/23/411-1/222-1/234
in-lbf
4453931952834347171080
Nm
561122324981122
TFM1600 Seat TorqueSBC9
-
8/11/2019 SVF Torque Tables
6/7
I N C O R P O R A T E D
SVFFlow Controls Torque
07.15.201
Tables
VALVE OPERATING TORQUE TABLES
SVF Flow Controls, Inc. 13560 Larwin Circle Santa Fe Springs, CA 90670 Tel: 1.800.783.7836 FAX: 562.802.3114
[email protected] [email protected] Visit our website: www.SVF.net Specifcaons subject to change without noce
Document: SVF_Torque_Ta
SIZE
1/23/411-1/222-1/2
in-lbf
6060100200250450
Nm
7711232851
TFM1600 Seat TorqueTSB7
SIZE
1/23/411-1/22
in-lbf
6060100200250
Nm
77112328
TFM1600 Seat TorqueTSB7FSIZE
1/23/411-1/22
in-lbf
100140210490520
Nm
1116245559
TFM1600 Seat TorqueTSBC7F
SIZE1/23/411-1/22
in-lbf602003005501100
Nm7233462124
DelrinSeat TorqueH7
continuedSIZE
1/23/411-1/222-1/2
in-lbf
100140210490520900
Nm
1116245559102
TFM1600 Seat TorqueTSBC7
in-lbf662203306051210
Nm8253768137
PEEK Seat Torque
SIZE1/23/41
in-lbf55190290
Nm62233
DelrinSeat TorqueP4
in-lbf61209300
Nm72434
PEEK Seat Torque
SIZE
1/4
3/81/23/411-1/22
in-lbf
150
1501502003205751000
Nm
17
1717233665113
DelrinSeat TorqueHBEV
in-lbf
160
1601602203356101150
Nm
18
1818253869130
PEEK Seat Torque
CleanFLOW TM
-
8/11/2019 SVF Torque Tables
7/7
I N C O R P O R A T E D
SVFFlow Controls Torque
07.15.201
Tables
VALVE OPERATING TORQUE TABLES
SVF Flow Controls, Inc. 13560 Larwin Circle Santa Fe Springs, CA 90670 Tel: 1.800.783.7836 FAX: 562.802.3114
[email protected] [email protected] Visit our website: www.SVF.net Specifcaons subject to change without noce
Document: SVF_Torque_Ta
SIZE
1/43/81/23/411-1/41-1/22
in-lbf
3535355080120250300
Nm
44469142834
TFM1600 Seat TorqueEZ9
SIZE
34
in-lbf
9871009
Nm
112114
TFM1600 Seat TorqueFS7
SIZE
1-1/223
46
TFM1600 Seat Torque41Rev3
in-lbf
254368728
12091532
Nm
294282
137173
SupraLonTMSeat Torque
SIZE
1/23/41
1-1/222-1/23468
in-lbf
7281130
299371598988150841606500
Nm
8915
344268112171470735
TFM1600 Seat TorqueB41Rev3
in-lbf
9198172
3684607281209184652008060
Nm
101119
425282137209588911
SupraLonTMSeat Torqu
Flanged
SIZE
1/23/411-1/22
in-lbf
3166113240260
Nm
47132729
PTFE Seat TorqueBZ9
in-lbf
208299598
9881600
Nm
243468
112181