CURRICULUM VITAEName And Address :Suyog Chandrakant Patil E-mail: suyog22188@gmail.com,Vijayshree CHS, Room No-8, Contact: Resi.: (022) - 27457531.Plot No.-27, Sector-16, Mobile: +91-9930522088New Panvel - 410206, MAHARASHTRA. .

1. OBJECTIVE:

To be associated with a progressive organization which can provide me with a dynamic work sphere to extract my

inherent skills as a Professional, use and develop my attitude to further the organization’s objectives and also attain my

career targets in the progress.

2. SUMMARY:

7 years experience in Oil & Gas, Petrochemical Industry in Instrumentation Engineering Discipline.

Carried out Instrument Loop Checking for various types of Instruments.

To carry out weekly, quarterly, half yearly and yearly maintenance of the said systems and modification in DCS, PLC and SCADA systems as required.

Responsible for all the checkups required DCS panels: relay marshaling, digital marshaling, controller panels,

analog marshaling panels, panel, interpaneling activity.

Responsible for all the checkups required before the startup of main plant and utilities. Simulate the desired

conditions and see to it that all the hardware and software is functioning ok.

Bentley Newada 3500 Vibration Monitoring System experience.

Experience in MICON Anti-Surge System. To provide technical functional support to instrument engineers on complex control system faults.

Experience of SAP-PM module.

Review of P&I diagrams, Cause & Effect Diagrams, Instruments lists, Flow chart. Experience of carried out Control Function Test & Sequence trial for different kind of equipment’s. .

In-depth knowledge of Data Sheets, Instrument Drawings, I/O wiring diagrams, P&IDs.

Familiar with ISA, IEC standards and different brands.

Keep good knowledge about Ex-proof instruments, intrinsically safe instruments, area classification and standards.

3. ORGANISATIONAL EXPERIENCE:

Instrumentation Engineer at M/s Deepak Fertilizer & Petrochemicals Corporation Ltd., Mumbai. Designation: Manager - Instrumentation

(From November 2014 to Till Date) Project Handled: Weak Nitric Acid, Ammonium Nitrite, Gas Turbine, Steam Turbine,Boiler

Key Responsibilities: Experience in ISO 9001:2008, ISO 14001:2004, OHSAS 18001: 2007.

1

Loop Checking from field to DCS/ PLC’s.

Responsible to carry out configuration on DCS, carry out loop configuration, system configuration, logic

developments, graphic buildings etc.

Logic Development and modifications .

Review of daily log sheet, analyze data, priorities & allocate the work among technicians.

Plan & Organize resources for the executions of job.

Assisting in shutdown planning, budgeting and execution.

Regularly co-ordination with other departments for smooth operation of plant.

Preparation of different kind of SOP’S for proper work methods followed by safety norms.

Preparation Weekly & Monthly reports for higher management acknowledgement.

Prepares indent, services work order , verifies measurement sheets & bills based on requirements & jobs,

gives technical clearance for the purchase.

Preparation of execution of Calibration & PM schedule.

Training & knowledge sharing to Engineers & Technicians.

Instrumentation & Control Engineer at M/s IG Petrochemicals Ltd, Mumbai.(From February 2012 to November 2014)

Plant Handling Pthaleic Anhydride, Maleic Anhydride, BOILER, DM Plant etc.

Key Responsibilities: Carried out commissioning & tuning of firing control of Boilers (lead –lag) and drum level control.

Experience of Inst. Air compressor & Oil fired heaters maintenance.

Vendor drawing review & Coordination with other disciplines.

Responsible to understand the process problems and develop new strategy for smooth operation of the

plant.

Carried out installation, commissioning, inspection, start-up and maintenance jobs.

Maintenance & Calibration of Control Valves (Pneumatic, MOV’s)

Prepare work method for existing maintenance work in accordance with established technical and

professional engineering standards.

Carry out detail and designing engineering work for some upgraded projects.

Jr. Design Engineer – Instrumentation at Process System Engineers Pvt. Ltd.(From August 2009 to February 2012)

Work Profile: Preparation of Instrument index by review the P&ID with the use of INtools.

Preparation of cable Schedules & Interconnection diagrams.

Knowledge of creating Device Panel, JB’s, Marshalling, DCS Panels and cable wiring details. Generating instrument loop diagrams for Conventional wiring using enhanced smart loop.

Preparation of Instrument Index, Instrument I/O list from P&ID.

Technical Bid Evaluation for Instrument items, vendor drawing review and approval.

4. EDUCATIONAL QUALIFICATION:

2

B.E. in Instrumentation Engineering (2005-2009) from Ramrao Adik Institute Of Technology, Nerul, Navi Mumbai (Mumbai University) with 61.93 % in Final Year aggregate.

HSC in Science (2005) from Maharashtra Board, Mumbai with 71.33% aggregate.

SSC (2003) from Maharashtra Board, Mumbai with 76.13% aggregate.

5. COMPUTER SKILLS:

Familiar with Windows, MS Office/ Excel, 2007, 2010, MS Power Point, SAP PM Module.

6. STRENGTH: Creative, Enthusiastic, Well organized and able to get along well with people.

Ability to work independently or as a part of team, Ability to understand, Grasp, Develop and work on new projects.

7. PERSONAL DETAILS:

Date of Birth : 22nd January 1988. Languages Known : English, Marathi, and Hindi. Marital Status : Single. Relocate : Yes. Passport Status : Available (No.-J2891108) Date of Expiry : 30th September 2020 Hobbies : Reading, Internet Surfing and music. Joining Time : Three Month.

“I hereby declare that the above information's are true to best of my knowledge.”

Place: Navi Mumbai (SUYOG C. PATIL)

3