ONLINE ONLY AUCTION OF LATE MODEL FABRICATING EQUIPMENTINCLUDING LASERS, PUNCHES, IOWA SLEAR LINE, ROLL FORMERS,

WIRE AND TUBE FABRICATING, MISC. MACHINERY AND SUPPORT EQUIPMENT

ONLINE ONLY AUCTION OF LATE MODEL FABRICATING EQUIPMENTINCLUDING LASERS, PUNCHES, IOWA SLEAR LINE, ROLL FORMERS,

WIRE AND TUBE FABRICATING, MISC. MACHINERY AND SUPPORT EQUIPMENTSee Instructions on Page 5

To Become a Qualified Bidder on the Internet

OMG Model Special CNC Twin Head HorizontalPipe Bender

1999 Complete Tooled “C” and “Z” EaveStrut Rollforming Line 4” – 12”

(23) Kuka KR-150, KR-100, KR-180, & KR-16Robots w/ Controls & Accessories

Clifford 24-Head Mesh Welder4,000 Watt Trumpf Trumatic L3030 CNCLaser w/ Lift Master

16 Ga. X 48” Wide X 10,000 LB. Engel High Speed Panel Fabricating Line

SURPLUS TO THE ONGOING OPERATIONS OF

INTERNATIONAL TECHNICAL COATINGSINTERNATIONAL TECHNICAL COATINGSLocation 1: 430 N. 47th Ave. – Phoenix, Arizona 85043

Location 2: 845 E. Markison Ave. – Columbus, Ohio 43207

ONLINE BIDDING ENDS: TUESDAY, OCTOBER 11TH AT 9:00 AM MSTONLINE BIDDING ENDS: TUESDAY, OCTOBER 11TH AT 9:00 AM MSTINSPECTION: MONDAY, OCTOBER 10TH FROM 10:00 AM TO 4:00 PM

52” Wide x 10,000 Lb. Iowa Precision SlearLine Including Six-Roll Straightener, Shear,Slitter and Uncoiler

NEW AS2010

NEW2007

NEW1997

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | info@cia-auction.com2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1647510D CIA ITC-6 9/20/16 9:03 AM Page 3

ONLINE BIDDING ENDS: TUESDAY, OCTOBER 11THONLINE BIDDING ENDS: TUESDAY, OCTOBER 11TH

STRUT ROLLFORMINGLINEPurchased from NCI BuildingSystems, Southlake, Texas1999 Complete Tooled “C” and “Z”Eave Strut Rollforming Line 4” -12” SEE PHOTO

Complete Metform Line Consistingof: 20,000 Lb. Metform Double EndUncoiler, Width 36”, Motorized,Hydraulic Expansion, Hold Down Arms,Hydraulic Coil Car, Air Clutch and Brake

Indramat CTA4 Digital Controland CRT Servo ControlMetform 5-Head Hydraulic PrePunch and Cuttoff System,Equipped with 9/16” X 3/4” HolePunching

Metform Pre-Cut Straightener, 5-Straightening Rolls, Width 30” EntryPinch Rolls, Peeler

Metfrom 33-Stand Servo DriveRollformer, Computerized, Servo Drive,Auto Setup, Vari-Speed, Metform ControlConsole

ENGEL PANEL LINEPurchased from Penn RefrigerationScranton, PA16 Ga. X 48” Wide X 10,000 LB.Engel High Speed Panel FabricatingLine Designed to Fabricate a 6’ to 8’Long Panel in Approx. 20 Seconds(1997) SEE PHOTO

10,000 Lb. Engel Model 10,000 EXMSingle End Hydraulic Uncoiler; s/n12497-97

Engel Model M-R Recoiler, EngelModel SS-4 Combination Seven-RollStraightner and Slitter; s/n 12197-97

Engel Model PT-4 CombinationPunch and Shear; s/n 12297-97, EntryPinch Roll, (6) Press / Notch Stations ((3)Per Side), 16 Ga. Thru 20 Ga. Mild SteelCapacity, 20 Ga. Stainless Steel Cap.,Min. Part Length to be Processed fromCoil thru System is 3-1/2’

Engel Model DH-3508-4 Eight-StandDuplex Roll Former; s/n 12097-97, 1”Arbor, 3” Vertical Centers, 5” HorizontalCenters, 50 FPM Line Speed, 11” thru48” Sheet Width, Panel Edges formed Upwith a max of 9/16” Leg

Engel Model EF-4 Dual End Former;s/n 12397-97, Configured to Form aSingle 90 Degree Bend at 4-1/2”, Entryand Exit Belt Conveyor, 15’ Max. PanelLength

Transfer Conveyors, Electrics,Hydraulics, and Control System

SLEAR LINE52” Wide x 10,000 Lb. IowaPrecision Slear Line Including Six-Roll Straightener, Shear, Slitter andUncoiler; s/n UC0414, Iowa PrecisionShear Controller, 48” X 120” RollerConveyor Unload Table SEE PHOTO

CNC LASERS4,000 Watt Trumpf TrumaticL3030 CNC Laser w/ Lift Master;s/n 920184 , Trumpf Model TLF4000Turbo A Resonator; s/n 446163, TrumpfCNC Controls, (2) 5’ X 10’ ShuttleTables, 5” Z-Axis, Keller Dust Collector,Keller L16/29 TR215.30 Chiller,Liftmaster Model L3030 Sheet LifterSickLight Sensors (New 2000) SEE PHOTO

3,800 Watt Trumpf TrumaticL3030 CNC Laser w/ Lift Master;s/n 920111, Trumpf Model TLF3800

16 Ga. X 48” Wide X 10,000 LB. Engel High Speed Panel Fabricating Line

Clifford 24-Head Mesh Welder

52” Wide x 10,000 Lb. Iowa Precision Slear LineIncluding Six-Roll Straightener, Shear, Slitter andUncoiler

NEW1997

1999 Complete Tooled “C” and “Z” Eave Strut Rollforming Line 4” – 12” – Profile Drawings Available On Web Site

1647510D CIA ITC-6 9/20/16 9:03 AM Page 4

INTERNATIONAL TECHNICAL COATINGSINTERNATIONAL TECHNICAL COATINGS

Turbo Resonator; s/n 445963,Trumpf CNC Controls, (2) 5’ X 10’Shuttle Tables, 5” Z-Axis, KellerModel Surface Filter Vario T1.5 DustCollector, Keller L16/29 TR215.30Chiller, Liftmaster Model L3030Sheet Lifter, Sick Light Sensors, 25HP Trumpf Dust Collector (New1999) SEE PHOTO

CNC TURRET PUNCHES20 Ton Amada Model Libra205 CNC Turret Punch; s/n00200009, 33 & 36 Turret Stations,70 KVA, Fanuc Series 16P CNCControl, Auto Index, Amada LUL-412 Push Arm, (2) 51” x 165”Guide Bars, (2) 52” x 70” TableStacker, Tool Changer, Tooling Rack,(3) Chip Conveyors, Koolant KoolerModel HCV7500 Chiller; s/n 16215(New 1999) SEE PHOTO

HYDRAULIC PRESS200 Ton Samco Model 4889Six-Post Hydraulic Pre-PiercePress; s/n 4889PCE, 40” X 90” MaxDie Space, Approx. 26” Stoke,Scrape Chute, 60 HP HydraulicUnit, AMS XL-200 PLC Control(New 2004)

WIRE MESH WELDERClifford 24-Head Mesh Welder;100” Wide, Cross Wire Feeder, LineWire Straightener, Two-HeadSecondary Welder, Pull Out Line,Drop Stacker, (2) Control Cabinets

CNC WIRE BENDERSMontorfano Model GE-10 CNCWire Bending Machine; s/n716645, CNC Control

Pave Variform PV117 CNCWire Bender; s/n N/A, CNCControl SEE PHOTO

Pave Automation Micro 8 CNCWire Bender; s/n N/A, CNCControl

FABRICATING EQUIPMENT70 Ton X 8’ BetenbenderHydraulic Brake Press; s/n N/A,Auto Gauge CNC1000 Back GaugeControl

8 Ton Haeger Model WIPHydraulic Insertion Press; s/nN/A, 24” Throat

6 Ton Haeger Model HP6-C-4Insertion Press; s/n 2395, 18”Throat, Bowl Feed

Kolev Eng. Hydraulic PanelPunch w/ Dies4-Post Hydraulic Press; 28” X28” Between Posts SEE PHOTO

Niko Model TBH1 HorizontalTable Type Bender w/ Dies14 Ga. X 48” NiagaraHydraulic Shear; s/n 61181

WELDING EQUIPMENT20 KVA Miller Model SSW-2040ATT Spot Welder; s/nKJ198821, 20” Throat

(2) 300 Amp Miller CP-30ZCV-DC Welding Power SourcesStryco Spot Welder; s/n N/A, 32”Throat

MATERIAL HANDLINGROBOTSPurchased from SolyndraFremont, CaliforniaKuka Model KR-150L110-2Six-Axis Robot; w/ KRC2 RoboticControls & Pendant (New 2010)

(13) Kuka Model KR-100-2PASix-Axis Robots; w/ KRC2Robotic Controls & Pendant (New2010)

(3) Kuka Model KR180-2PASix-Axis Robots; w/ KRC2Robotic Controls & Pendant (New2007)

(5) Kuka Model KR16 Six-AxisRobots; w/ KRC2 Robotic Controls& Pendant (New 2008)

SEE PHOTO

Kuka Model KR16CR Six-AxisRobot; w/ KRCZ Robotic Controls& Pendant (New 2007)

Pave Variform PV117 CNC Wire Bender

3,800 Watt Trumpf Trumatic L3030 CNC Laser w/ Lift Master

4,000 Watt Trumpf Trumatic L3030 CNC Laser w/ Lift Master

20 Ton Amada Model Libra 205 CNC Turret Punch – w/ Sheet Handling and Die Changing System

200 Ton Samco Model 4889 Six-Post Hydraulic Pre-Pierce Press

NEW2004

1647510D CIA ITC-6 9/20/16 9:03 AM Page 5

www.cia-auction.comwww.cia-auction.com

(4) Kuka Model KL1500/3 RobotLinear Tracks; (2) 18’, (1) 26’ & (1)31’ (New 2010)

(4) Kuka Model KL1500/2 RobotLinear Tracks; (2) 21’ & (2) 22’(New 2007)

(17) Fabricated Riser Blocks; (8)41” x 41” x 24”, (1) 41” x 41” x 29”,

(4) 41” x 41” x 41”, (3) 41” x 41” x47”, 29” Dia. x 49” High

CRANES AND HOISTS5 Ton x 50’ (Approx.) SpanWazee Crane Single GirderOverhead Bridge Crane; s/n 3529-5, 50’ Span, 5 Ton Shaw-Box CableHoist

3 Ton x 15’ Allied Crane TrolleyType Portable Gantry Crane w/ 2Ton Coffing Electric Chain Hoist3 Ton Harrington Electric ChainHoist w/ Powered Trolley; PendantControl

Gap, Inc. Model 1800 Pallet Assembly System

70 Ton X 8’ Betenbender Hydraulic Brake Press

5 Ton x 50’ (Approx.) Span Wazee Crane Single GirderOverhead Bridge Crane

(14) 48” x 72” Muratec Product Code 34854 Dual BeltConveyors

(5) Kuka Model KR16 Six-Axis Robots

NEW AS2010

NEW2008

(23) Kuka KR-150, KR-100, KR-180, & KR-16 Robots w/ Controls & Accessories

Pallet Repair Systems, Inc. Pallet Repair Line

1647510D CIA ITC-6 9/20/16 9:04 AM Page 6

COLUMBUS, OHIO LOCATIONCOLUMBUS, OHIO LOCATION

SHOP EQUIPMENT(14) 48” x 72” Muratec Product Code34854 Dual Belt Conveyors SEE PHOTO

(14) Frommelt Model 1345 Slim LineAutomated Barrier Doors w/ (28) 8’ HighI-Beam Stands25 HP Kaeser Model DSB170 CabinetEnclosed Rotary Screw Air Compressor5,000 Lb. Fairbanks Model PLF-A3500-F4 Digital Platform Scale; s/n H325156,48” x 98” Platform

(2) IPM 55 Series Stretch WrappersIia-In Model IS-102A Bander; s/n10021402, 22” x 30” Table

Taiwan Made Model SA-2000 Bander; s/n0827439, 22” x 30” Table (New 2000)

75 KVA Hammond Three-Phase DriveInsolation TransformerAMS MP300 Series Length ControlSystem

WATER SYSTEMSPurchased from Solyndra Fremont,CaliforniaAEC Model PSW30 Water Chiller; s/n34K0598

AEC Model T1100D Three-Pump ChilledWater Tank; s/n 33MO184, (3) 10-HP Pumps

PALLET REPAIR EQUIPMENTPallet Repair Systems, Inc. Pallet RepairLine Including; 3-Gun Nail Mate PneumaticNailers, Pallet Repair Table, (2) Pallet Turner,

Pallet Stackers, Pallet Plate Press, Elo TouchScreen Control, (8) 52” X 124” Roller Conveyor

SEE PHOTO

Gap, Inc. Model 1800 Pallet AssemblySystem Including; Assembly Table, RepairTable, Delivery Table SEE PHOTO

Smetco Pallet Slant Notcher16” RIP Saw with 24” Chain Conveyor 48” Bandsaw Pallet Dismantler 64” Smetco Bandsaw Pallet Dismantler

EQUIPMENT LOCATED ATCOLUMBUS, OHIO FACILITYLiebherr Parts Transfer System fromChrysler Engine Plant; (10) Control Panels,(14) Robot Arms w/ Approx. 7’ Stroke, (24) 10’High Gantry Posts w/ 10” x 10” Heavy WallTube, (10) Approx. 40’ Gantry Beams, CableTray, (10) Skids of Accessories, Designed ToHandle Small Machined Parts for Transfer,Purchased from Chrysler, Kenosha, WI

SEE PHOTO

HK Systems Vongal Model SPLX MKIIPalletizer w/ Stretch Wrapper; S/N 3449,54” Wide Conveyor, Orion Model FA-44Wrapper; S/N 2005-0215014, 48” Wide ShuttleThru Palletizer (New 2005) SEE PHOTO

OMG Model Special CNC Twin HeadHorizontal Pipe Bender; S/N 252-1817-04/07, Axiomtek Control, Each Head TravelsApprox. 8’, Center Work Holding & PositioningHead (New 2007) Purchased from Tote Cart,Rockford, IL SEE PHOTO

126” X 0.118” Ga. RAS Model 73.30CNC Folder; S/N 10/10, System 5000 CNCControl, 48” Back Gauge, Merlin Light Curtains,Touch Screen Replaced 09/2012, Purchasedfrom Acuity Brands, Cochran, GA

SEE PHOTO

(2) 33 Ton Finn Power Model TP-2015-BIF2/AM CNC Turret Punches; s/n 7.7-201549096 and 7.7-201547896, 5/16”Maximum Material Thickness, 400 HPMNibbling Speed, 200 HPM Hit Rate On 1”Centers. 1.787” Stroke Length, 2950 IPMPositioning Speed, 4528 IPM Linear TravelSpeed, 41” x 60” Table Size (WithoutRepositioning), Turret Configuration - 22Stations, Thick Turret Auto-Index, Multi-Tool,Siemens 3N Control (New 1996) SEE PHOTO

Whitelegg Model CFM-600-TWR-AFUCNC Wire Bender; S/N 01/453, BritishFederal WS-500 Handler, Pilz Control,Motorized Horizontal Uncoiler (New 2001)Purchased from Ranger Metal Products,Canada

Wafios Type AF700 D.E. Wire Deburrer;S/N 2-6700-054, Approx. 96” Max WidthPurchased from Ranger Metal Products,Canada

390-HP Atlas Copco Model GA315VSDAir Compressor; s/n AIF095921, Vacon Drive(New 2005) SEE PHOTO

(4) Kuka Type KR-100-2PA Robots; KukaKR-C2-AWO Controls (New As 2010)Purchased from Solyndra Fremont, CA

SEE PHOTO

20,000 LB Autoquip Model CFL-200BForklift Platform; S/N 68741159 Purchasedfrom Acuity Brands, Cochran, GA

(2) Nachi Model B008-H100 Robots; S/N32958 (New 2000) & 32974 (New 2000), TypeAW Control

HK Systems Vongal Model SPLX MKII Palletizer w/Stretch Wrapper

390-HP Atlas Copco Model GA315VSD AirCompressor

(4) Kuka Type KR-100-2PA Robots

(2) 33 Ton Finn Power Model TP-2015-BIF2/AM CNCTurret Punches

126” X 0.118” Ga. RAS Model 73.30 CNC FolderOMG Model Special CNC Twin Head Horizontal PipeBender

WEBCAST BIDDERINSTRUCTIONS

➢ All Internet bidders must registerfor this auction atwww.bidspotter.com at least24-Hours Prior to the Sale Date, if you do not you will not beapproved.

➢ All Internet bidders from outsidethe contitnetal U.S. who do nothave a history with our Companymust Post a Deposit of Approx.25% of Your Planned SpendingBudget or $5,000.00 Minimumwith Cincinnati IndustrialAuctioneers in Order to beapproved to Bid. Those who doNot Post the Deposit Will Not beApproved. Period.

NEW AS2010

NEW2005

NEW2005

NEW2007

Liebherr Parts Transfer System from Chrysler Engine Plant

1647510D CIA ITC-6 9/20/16 9:03 AM Page 1

All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All balances aredue at the conclusion of the sale. No mer-chandise may be removed while the sale is inprogress. All bidders must comply with ourStandard Terms of Sale, copies of which willbe available at the sale site or can be obtainedfrom our website.

18% BUYERS PREMIUM INEFFECT FOR ALL PURCHASES

TERMS OF SALE

AUCTIONEERS

Directions to Phoenix Warehouse; From I-10Approx. 10 miles west of downtown exit at no. 140 N.43rd Ave. Turn South onto N. 43rd Ave and Proceed3/4 mile to Van Buren St.. Turn Right onto Van Burenand proceed 1/2 mile to N. 47th Ave. Follow signs toauction parking and sale entrance.

DIRECTIONS

ONLINE BIDDING ENDS: TUESDAY, OCTOBER 11THONLINE BIDDING ENDS: TUESDAY, OCTOBER 11TH

ONLINE BIDDING ENDS:Tuesday, October 11th

STARTING AT 9:00AM MSTINSPECTION:

Monday, October 10th10:00 AM to 4:00 PM

FIRST CLASS MAIL! PRE-SORTFIRST CLASS

U.S. POSTAGEPAID

CINCINNATI, OHIOPERMIT NO. 3593

Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞

INTERNATIONALTECHNICAL COATINGS

ONLINE ONLY AUCTION OF LATE MODEL FABRICATING EQUIPMENTINCLUDING LASERS, PUNCHES, IOWA SLEAR LINE,

ROLL FORMERS, WIRE AND TUBE FABRICATING, MISC. MACHINERYAND SUPPORT EQUIPMENT

Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

IMPORTANT NOTICE:

INTERNATIONALTECHNICAL COATINGS

430 N. 47th Ave. – Phoenix, Arizona 85043

845 E. Markison Ave. – Columbus, Ohio 43207

OMG Tube BenderOMG Tube BenderOMG Tube Bender Iowa Slear LineIowa Slear LineIowa Slear Line

(2) Trumpf Lasers(2) Trumpf Lasers(2) Trumpf Lasers (23) Kuka Robots(23) Kuka Robots(23) Kuka Robots

INTERNATIONALTECHNICAL COATINGS

INTERNATIONALTECHNICAL COATINGS

Phoenix, Arizona 85043

Columbus, Ohio 43207

SURPLUS TO THE ONGOING OPERATIONS OF

Cincinnati Industrial AuctioneersJeffrey L. Luggen

Joseph M. Luggen John F. Rome

SURPLUS TO THE ONGOING OPERATIONS OF

CINCINNATIINDUSTRIALAUCTIONEERS

auctioneers | appraisers | since 1961

Contact Information2020 Dunlap St.Cincinnati, Ohio 45214Phone 513-241-9701Fax 513-241-6760www.cia-auction.com

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERSauctioneers | appraisers | since 1961 | cia-auction.com | info@cia-auction.com2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1647510D CIA ITC-6 9/20/16 9:03 AM Page 2