surface grinder equipment in brisbane, sydney, melbourne, adelaide & perth

OUR LOW PRICE$3,385+GST


LOOKING FOR PRODUCTS TO MAKE SURFACE PREP EASIER?

• Mix, transport and pour directly onto floor.• Mix 4 - 5 bags at one time, quickly.• Mixes cement screed, grout, mortar and more• 1800W, 2-speed motor (140 rpm and 470 rpm)• Balanced, easy-tilt cradle for accurate placement of material• Easy operation by one person• Increases production by 40%• Slashes 33% off labour costs.

• Large wheels for outdoor use.• Mix, transport and pour directly onto floor.• Mix 4 - 5 bags at one time, quickly.• Mixes cement screed, grout, mortar and more• 1800W, 2-speed motor (140 rpm and 470 rpm)• Balanced, easy-tilt cradle for accurate placement of material• Easy operation by one person• Increases production by 40%• Slashes 33% off labour costs.

Hippo Porta-Mix (Indoor) Portable Mixing Station

Hippo Porta-Mix (Outdoor)

MIXING EQUIPMENTCon-Treat offers a wide range of mixing equipment, from the Hippo Porta-Mix for self levelling

compounds through to the larger Soroto Mixer for epoxies etc...!

Hippo Porta-Mix SmartMixxThe hippo porta-mix is designed for the mixing of self levelling compounds, grout etc...!

The SmartMixx portable mixing station is the contractors choice for mixing self levelling compounds...

SmartMixx is the ultimate mixing station for all self-levelling cement, producing a perfect mix every time. Designed by contractors for contractors it provides efficient hands-free mixing and fast precision pouring of materials, saving valuable time on jobs. One SmartMixx station can mix up to 80kg in 3 minutes, which equates to 1 tonne per hour.The trolley unit is ultra-lightweight for easy transportation and the ergonomicdesign with easy tilt operation provides control and speed for precision pouring. SmartMixx also features a dust/splash reduction cover for safer use and less mess.SmartMixx has been tested, approved and is recommended by Dr Rolf Offerhaus, ARDEX Australia, as the most efficient mixing station for levelling compounds.SmartMixx is sold with an optional Protool Stirrer. The Protool Stirrer features variable speed sand is fully detachable. SmartMixx can be used with a selection of other brand stirrers (please contact Con-Treat for more information).

Preparing concrete surface is a big job. It is critical that it is done well to make sure your project is a success. To make sure you have the right equipment we’ve developed a selection of products to suit any situation.


Soroto Mixer 80ltr

CONCRETE SCARIFIERS


OUR PRICE FROM$5,960+GST

• Paddles are easily removed for cleaning without having to use tools.• The Soroto Mixer can easily loaded onto a ute by tipping and use of the wheels.• The telescopic legs are easliy adjusted for discharge into a wheelbarrow or bucket.• The motor has a protective start/stop switch and an easily released emergency stop.• Bags are poured through the charging hopper which is also fitted with a bag splitter.• Mixing for 3-5 mins produces a perfect brew, dispensed through a chute at the bottom.• The hinge mounted hopper has an automatic mechanical switch to meet safety

regulations.• A rubber strap secures the hopper during transport.• In case of wear you only need to change one paddle if the others are all ok.

The Soroto Mixer has been designed to handle anything from cementitious coatings, self levelling compounds and epoxies...!

Con-Treat’s range of concrete scarifiers allow you to choose from a variety of accessories and cutters to achieve the profile, depth & speed required for each project...!

Advantages

• Up to 200mm working width• Up to 3mm working depth per pass• Power source directly over drum to eliminate vibration & maximise surface contact.• Compact design.• Petrol, 240v or 3 Phase Electric• Comes with cutters.• 35-50 sqm/hr at 2mm depth.

The CPM-8 is the perfect machine for sidewalk repair, coatings and traffic line removal, creating non-slip surfaces and much more...!

CPM 8 Scarifier

OUR LOW FROM$9,032+GST

• Up to 250mm working width• Adjustable depth control - allows scarifying up to 5mm working depth per pass• Includes lifting bail, oil alert and hour meter• Ceramic tole adhesive removal• Comes with cutters• 40-65 sqm/hr at 3mm depth• Side loading large drum assembly• Teathered emergency stop switch• Larger 6” wheels in the rear for easy handling• Petrol or 3 Phase Electric models available• Vacuum port standard for dust-free cutting

The new push model CPM-10 features a side loading large drum assembly and a 10” wide cut.

CPM 10 Scarifier

Edco Concrete Scarifiers

CONCRETE SAWS

OUR PRICE FROM$2,450+GST

Con-Treat offers a wide range of concrete saws and diamond cutting blades for the professional contractor...

• Cutting Depth 14” = 130 mm• Motor = 2.2kw

• Cutting Depth 16” = 155 mm• Motor = 4kw

• Cutting Depth 16” = 155 mm• Motor = Honda GX-2

14” Single Phase Electric Concrete Saw

16” Three Phase Electric Concrete Saw

16” Petrol Concrete Saw

PRESSURE WASHER


• Easy swap between rotary cleaner and wand functionsDPW-4000 Pressure Washer

• Water flow at full pressure 4000PSI-15 ltr per min

• 24” Stainless Steel surface rotary cleaner

• Honda Engine GX390-Electric start

• Vibration reduction rubber engine mounts

• External bypass & thermal dumpvalue for heat protection

• Built in pressure gauge

• Inlet water filter

• Long-life, compact galvanised frame

EASY HAMMER

OUR LOW PRICE$799+GST

Surface Preparation Equipment for the professional contractor...

• Makita 1304

• Hilti 905

• Hitachi H65

• Milwaukee (Kanga) 900

• Bosch GSH 16-30

Fits the following hammers

FEATURES & BENEFITS

FLOOR STRIPPERSCon-Treat offers a wide range of surface preparation equipment including the Sammy Floor Stripper, the Edco Tile Shark

and much much more...

• Weight: 48kg• Tool-free setup• Heavy Duty Bearings• Adjustable Handle• 16kg Removable Weight• 3/4 Horsepower Motor

Features

Sammy Floor Stripper

• Rigid Steel Construction• Stainless Steel Fittings• Removable Blade• Quiet Operation• Minimal Maintenance


• Weight: 91kg• 1.5kw Motor• Folding Handle• Lift Point• Vibration Free Handle

Features

Beaver 250 Floor Stripper

• No Belts• Removable Blade• Quiet Operation• Minimal Maintenance


Factory/Showroom80 Township Drive,Burleigh Heads Qld 4220(Exit 89 - M1)

Postal AddressPO Box 4195, Elanora Qld Australia 4221

Opening HoursMonday - Thursday: 7.30am - 4.30pmFriday: 7.30am - 3.30pmSaturday & Sunday: Closed

Disclaimer: All prices are stated net of GST and are subject to change without notice.

Catalogue period: 01 Apr to 30 Apr 2015

Con-Treat are the experts in flooring products & concrete surface preparation equipment in Brisbane, Sydney, Melbourne, Adelaide & Perth!

Con-Treat is your ultimate one stop flooring shop, offering you the convenience of supplying all your needs from the beginning of your project, to the final finished floor for total protection.Con-Treat has all the products and equipment you need to get the job done, on time and on budget. From waterproofing & curing, to concrete sealers, epoxy coatings, surface preparation equipment and much much more...we’ve got you covered.For comprehensive concrete floor solutions, help and information be sure to check the Articles and Gallery sections of our website which offer an in depth look at not only the possibilities of concrete flooring for your home or office but explain the various processes involved in turning a simple concrete floor into a slick, modern feature. Concrete is perfect for many environments and purposes - domestically and commercially, it offers a clean, finished look, a durable, safe surface and is extremely affordable.Combined with the correct concrete waterproofing protection and with the option of a superb finish using a quality polisher, it is an adaptable, modern flooring solution.

0156

SB

C 0

9/14

QUALITY POLISHERS & CONCRETE GRINDERS ...To achieve a beautiful polished floor you need to have a good quality polishers and concern grinder.

We have a great range of concrete polishers and grinders for sale, and we deliver all over Australia. We also have finance available. Check out our range today.

Galaxy 250

Satellite 480 MK III


Meteor 250 MK III

Satellite 480 MK III Petrol

Satellite 760-6 MK III


Satellite 480 MK III Planetary

Satellite 760-12 MK III

surface grinder equipment in brisbane, sydney, melbourne, adelaide & perth

Sales