surface asperities thickness on the flattening of the...
TRANSCRIPT
The effect of componentthickness on the flattening of
surface asperitiesby J Jamari
Submission date: 29-Aug-2018 12:59PM (UTC+0700)Submission ID: 994452974File name: component_thickness_on_the_f lattening_of _surf ace_asperit ies.pdf (762.33K)Word count: 4178Character count: 21168
22%SIMILARITY INDEX
12%INTERNET SOURCES
18%PUBLICATIONS
0%STUDENT PAPERS
1 4%
2 3%
3 3%
4 2%
5 2%
The effect of component thickness on the flattening of surfaceasperitiesORIGINALITY REPORT
PRIMARY SOURCES
eprints.undip.ac.idInternet Source
J. Jamari, D. J. Schipper. "ExperimentalInvestigation of Fully Plastic Contact of aSphere Against a Hard Flat", Journal ofTribology, 2006Publicat ion
J. Jamari, M. B. de Rooij, D. J. Schipper."Plastic Deterministic Contact of RoughSurfaces", Journal of Tribology, 2007Publicat ion
J. Jamari, D.J. Schipper. "Plastic deformationand contact area of an elastic–plastic contactof ellipsoid bodies after unloading", TribologyInternational, 2007Publicat ion
ris.utwente.nlInternet Source
J. Jamari, D.J. Schipper. "Deterministic
6 1%
7 1%
8 1%
9 1%
10 1%
11 <1%
12 <1%
13 <1%
repeated contact of rough surfaces", Wear,2008Publicat ion
Jamari, J., and D.J. Schipper. "A test method tostudy the change in surface topography due torunning-in of a rolling contact : A TESTMETHOD TO STUDY THE CHANGE INSURFACE TOPOGRAPHY", LubricationScience, 2013.Publicat ion
www.technion.ac.ilInternet Source
documents.mxInternet Source
fcee.utm.myInternet Source
repository.uin-malang.ac.idInternet Source
Faghihnejad, Ali, and Hongbo Zeng."Fundamentals of Surface Adhesion, Friction,and Lubrication", Polymer Adhesion Frictionand Lubrication Zeng/Polymer AdhesionFriction and Lubrication, 2013.Publicat ion
Wei, Chin-Chung, Wei-Lun Liou, and Ruei-Syuan Lai. "Wear analysis of the offset type
14 <1%
15 <1%
16 <1%
17 <1%
18 <1%
preloaded ball–screw operating at highspeed", Wear, 2012.Publicat ion
C Lu. "Experimental and theoreticalinvestigation of the asperity f lattening processunder large bulk strain", Proceedings of theInstitution of Mechanical Engineers Part JJournal of Engineering Tribology, 05/01/2008Publicat ion
H. Sojoudi, M. M. Khonsari. "On the Behavior ofFriction in Lubricated Point Contact WithProvision for Surface Roughness", Journal ofTribology, 2010Publicat ion
Korzekwa, D.A.. "Surface asperity deformationduring sheet forming", International Journal ofMechanical Sciences, 199207Publicat ion
M. Tauviqirrahman. "Optimization of partial slipsurface at lubricated-MEMS", 2011 2ndInternational Conference on InstrumentationControl and Automation, 11/2011Publicat ion
Daw-Kwei Leu. "Evaluation of frictioncoefficient using indentation model of Brinellhardness test for sheet metal forming", Journalof Mechanical Science and Technology,
19 <1%
20 <1%
21 <1%
22 <1%
23 <1%
24 <1%
25 <1%
26 <1%
06/2011Publicat ion
www.utwente.nlInternet Source
etd.lib.metu.edu.trInternet Source
orca.cf.ac.ukInternet Source
Whitehouse, . "Surface Geometry and ItsImportance in Function", Handbook of Surfaceand Nanometrology Second Edition, 2011.Publicat ion
John G. Lenard. "Tribology in Metal RollingKeynote Presentation Forming Group F", CIRPAnnals, 2000Publicat ion
www.ub.utwente.nlInternet Source
Timsit, Roland. "Electrical Contact Resistance :Fundamental Principles", Electrical ContactsPrinciples and Applications Second Edition,2014.Publicat ion
Hol, J., D. K. Karupannasamy, and T. Meinders."Multi-Scale Friction Modeling forManufacturing Processes: The Boundary Layer
27 <1%
28 <1%
Exclude quotes Of f
Exclude bibliography On
Exclude matches Of f
Regime", ASME 2012 InternationalManufacturing Science and EngineeringConference, 2012.Publicat ion
Megalingam, A., and M. M. Mayuram. "AComprehensive Elastic-Plastic Single-AsperityContact Model", Tribology Transactions, 2014.Publicat ion
Ma, B.. "Comparison of asperity f latteningunder different wavelength models for sheetmetal forming", Journal of Materials ProcessingTech., 20030922Publicat ion