Sure-LitesThe LED APC series is UL924 code compliant solution for indoor exit and emergency requirements that will operate for a minimum of 90 minutes during a power outage. The LED emergency heads are adjustable, can be side or top mounted and will provide 17 feet of emergency egress coverage. The nickel cadmium battery requires no maintenance. The exit features an LED source available for red or green letters, is field configurable for single or double face and has field configurable chevrons. The polycarbonate housing is universal mount ( ceiling, wall or end ) and available in a white or black finish. The high powered remote capable versions (H series) will power two additional 3.6 volt emergency heads from the APWR series to generate a total of 34 feet of emergency egress coverage.

SPECIFICATION FEATURES

Electrical- Dual Voltage Input 120/277VAC,60Hz

- Line-latching- Solid-State Voltage Limited

Charger- Solid-State Switching- Brownout Protection- Low Voltage Disconnect- Overload/Short Circuit Protection- Test Switch / Power IndicatorLight

- High Power Combo availablecapable of running two additionalLED remote heads

- 3.6V, .78W DC long LastingLED Heads

Housing Construction- All components are injection molded, color stable, high impact polycarbonate material- Textured finish available in whiteor black

- Components are of snap-fitconstruction to facilitate under5-minute installation

- Reinforcing ribs throughout

to provide maximum strength- Molded-in wireways facilitateinternal wire routing andconnections

- All components includingbattery and electronics arelocated inside the exit housing

- Snap-out or snap-in chevrondirectional indicators have full3/4” stroke

- Universal exits can be fieldconfigured as single face ordouble face

- Snap-fit canopy with captivemounting screws included withall exits

- Exit can be ceiling, wall, or endmounted

- Universal J-box mounting pattern- Operating temperature range10 °C to 40 °C

Battery- Sealed nickel cadmium- Maintenance free, long life- Full recharge time:24 hrs (max.)

Code Compliance- UL 924 Listed- UL Damp Location Listed- Life Safety NFPA 101- NEC/OSHA- Most State and Local Codes- California Energy Code

compliant

Lamp Data- AC LED: Long life LED lamps

provide uniform diffusedillumination

- DC: LED DC lamps (Brighter inemergency mode)

- Heads DC: 3.6V, .78W Long LifeLED Heads Light OutputEquivalent to 5.4W Incandescent

Warranty- Five-year warranty- Seven-year prorated battery

warranty

APC/APCH SERIES

TD505037EN2017-10-3

DESCRIPTION

E N E R G Y D A T AMaximum power

consumption

under all charge

conditions:

Sealed NickelCadmium BatteryLED Exits - Red

Input Power:

120V = 1.31W

277V = 1.68W

Input Current

(Max.):

120V = .09A

277V - .09A

Power Factor:

120V = >.12

277V = >.07

LED Exits - Green

Input Power:

120V = 1.55W

277V = 1.45W

Input Current

(Max.):

120V = .09A

277V = .09A

Power Factor:

120V = >.14

277V = >.06

Energy DataAC Only LED

Exits - Red

Input Power:

120V = 2.34W

277V = 1.62W

Input Current

(Max.):

120V = .14A

277V - .10A

Power Factor:

120V = >.14

277V = >.06

LED Exits - Green

Input Power:

120V = 2.8W

277V = 2.1W

Input Current

(Max.):

120V = .10A

277V = .10A

Power Factor:

120V = >.20

277V = >.07

8-1/4”[210mm]

7-1/2”[191mm]

11-11/16” [297mm]

16-9/16” [421mm]

5-1/2” [140mm] 3-15/16”[100mm]

1-3/4”[45mm]

2-5/16”[59mm]

3/4”[19mm]

POLYCARBONATE EXIT

AC ONLY SELF POWERED

EMERGENCY

LED LAMPS

EXIT LIGHTING

Catalog # Type

Date

Project

Comments

Prepared by

ORDERING INFORMATION

SAMPLE NUMBER: APXH7R2

Series Remote Heads Powered Battery Face Options Letter Colors Housing Color Catalog numbers

APC

_ = no remote heads 7 = nickel cadmium

battery

_ = Universal R = RedG = Green

_ = WhiteBK = Black

APC7R, APC7RBK, APC7G,APC7GBK

H = two 3.6V LED heads 7 = nickel cadmium

battery

_ = Universal R = RedG = Green

_ = WhiteBK = Black

APCH7R, APCH7RBK, APCH7G,APCH7GBK

operatingtemperaturerange

-20˚to 50˚Coperatingtemperaturerange

10˚to 40˚C

Specifications and dimensions subject to change without notice.

APC / APCH SERIES EXITS WITH REMOTE CAPACITY

17'spacing

17'spacing

APC SPACING WITH REMOTE

17'spacing

17'spacing

APC SPACING

TECHNICAL DATA

LampsThe AP Series Exits with Heads use energyefficient, long life LED’s to provide uniformdiffuse illumination of the exit face. The low operating costs and zero maintenance requirement makes LED lamps the wisest choicefor exit signs today. Emergency exit illuminationis provided by LED lamps and the heads employ3.6V, .78W DC Long Lasting LED Heads.

Housing ConstructionRugged, durable, injection moldedthermoplastic materials are used throughoutthe AP Series Exits with Heads. All structuralcomponents are designed with reinforcingribs to add additional rigidity and to maximizestructural integrity. These materials are impactand scratch resistant, and they have been UVstabilized to resist discoloration due to ageand ultraviolet radiation. All components aredesigned to be of snap-fit construction - nomechanical fasteners - to facilitate installationin under 5-minutes. Any components requiredfor installation (wirenuts, wire leads, universalmetal J-box bracket, etc.) are all included witheach exit. The universal design of the AP SeriesExits with Heads enables universal exits to beconfigured as single face or double face in thefield. The AP Series Exits with Heads can bewall, ceiling, or end mounted; a rugged, snapfit,low profile canopy with captive screws isincluded with every exit for ceiling and endmounting applications. Housing available in white or black color

LensLenses for the AP Series Exits with Headsare made from durable impact resistantthermoplastic. All exit faces are designed withfull 3/4” stroke snap-out or snap-in chevrondirectional indicators to insure maximumvisibility and compliance with the latest codes.

Line-LatchedAll Pro’s line-latched electronic circuitry makesinstallation easy and economical. A laborefficient AC activated load switch preventsthe lamps from turning on during installationto a non-energized AC circuit. Line-latchingeliminates the need for a contractor’s returnto a job site to connect the batteries when thebuilding’s main power is turned on.

Solid-State ChargerSupplied with a 120/277 VAC, voltage regulatedsolid-state charger. Immediately uponrestoration of AC current after a power failure,the charger provides a high charge rate. Thecharge circuit reacts to the condition of thebattery and regulates the charging process inorder to maintain peak battery capacity andmaximize battery life. Solid-state constructionrecharges the battery following a power failurein accordance with UL 924.

Brownout CircuitThe brownout circuit on All Pro’s exits monitorsthe flow of AC current to the exit and activatesthe emergency lighting system when apredetermined reduction of AC power occurs.This dip in voltage will cause most ballastedfixtures to extinguish causing loss of normallighting even though a total power failure hasnot occurred.

Solid-State TransferThe AP Series Exits with Heads incorporatessolid-state switching which eliminates corrodedand pitted contacts or mechanical failuresassociated with relays. The switching circuitis designed to detect a loss of AC voltage andautomatically energizes the lamps using DCpower. Upon restoration of AC power, the DCpower will be disconnected and the charger willautomatically recharge the battery.

Low Voltage DisconnectWhen the battery’s terminal voltage falls, thelow voltage circuitry disconnects the lightingload. The disconnect remains in effect untilnormal utility power is restored, preventingdeep battery discharge.

Test Switch/Power Indicator LightA test switch located on the bottom of the exitpermits the activation of the emergency circuitfor a complete operational systems check. ThePower Indicator Light provides visual assurancethat the AC power is on.

Overload and Short CircuitProtectionThe solid-state overload monitoring device inthe DC circuit disconnects the lamp load fromthe battery should excessive wattage demandsbe made and automatically resets when theoverload or short circuit is removed. Thisoverload current protective feature eliminatesthe need for fuses or circuit breakers for the DCload.

Sealed Nickel Cadmium BatteryAll Pro Emergency sealed nickel cadmiumbatteries are maintenance-free with a lifeexpectancy of 10 years. The sealed rechargablenickel cadmium battery offers high dischargerates and stable performance over a widerange of temperatures. The specially designedresealable vent automatically controls cellpressure, assuring safety and reliability.This battery is best suited for harsh ambienttemperatures because the electrolyte is notactive in the electrochemical process.

WarrantyAll-Pro products are backed by a five-year warranty.

Cooper Lighting Solutions 1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.cooperlighting.com