supplementary annexures to hbfc · pdf filesupplementary annexures to hbfc submission annexure...

SUPPLEMENTARY ANNEXURES TO HBFC SUBMISSION

Annexure A The Role of the

National Building Professionals Register in the

Training of Licence Holders

Annexure B

Content of Engineering Degrees

Annexure C

Content of Architecture Degrees

Annexure D

The Legal Ambit of the AIB’s Role

2

Annexure A

The Role of the National Building Professionals Register

in the Training of Licence Holders

_________________________________________________________

Training Package Requirements for

Assessors of the very qualifications which are the basis of the licensing of

Builders and Building Surveyors across Australia

_________________________________________________________

Annexure A (i) Correspondence from the

Construction and Property Services Industry Skills Council (CPSISC)

Annexure A (ii) Extracts from Construction Training Package

pertaining to the requirements for Assessors of National Building Qualifications

Annexure A (iii)

Extracts from Construction Training Package pertaining to the requirements for Assessors of

National Building Surveying Qualifications

Annexure A (iv) Formal advice from the

Construction and Property Services Industry Skills Council (CPSISC) with regards to RTOs complying with the

Construction Training Package’s requirements for Assessors

3

Annexure A (i) Correspondence from the

Construction and Property Services Industry Skills Council (CPSISC)

to CPSISC Construction & Property Services

Industry Skills Council

Suite 4. 7 Beissel Street PO Box 151 Belconnen ACT 2616 T +61 2 6253 0002 F +61 2 6253 0004 www.cosisc onni au

23 June 2015

Mr Paul Heather FAIB Senior National Vice President Australian Institute of Building PO Box 705 JAMISON ACT 2614

RE: Assessor requirements

In response to issues raised by the NSW Chapter President, David Alessi FAIB, on behalf of the Australian Institute of Building (AI B) regarding the qualifications and experience of people conducting assessments of vocational education and training qualifications in the CPC08 Construction, Plumbing and Services Training Package and the newly released CPC Construction, Plumbing and Services Training Package I can provide the following advice.

The information is based on:

• Requirements for Assessors from CPC08 (extract provided as Attachment 1) • Standards for Registered Training Organisations (RTOs) 2015 (Attachment 2) • Assessor Requirements in CPC units of competency and higher qualifications in building

and construction management (Attachments 3 and 4)

The Australian Skills Quality Authority (ASQA) is required to regulate RTOs in accordance with the Standards for RTOs (2015) and the specific requirements of the relevant national Training Package.

1. Assessor Requirements in the Construction, Plumbing and Services Training Packages (CPC08 and CPC) (refer Attachment 1):

CPC08 Version 9 provides the following advice under the Requirements for Assessors:

'In order to deliver the qualifications contained in this Training Package. assessors delivering qualifications from this CPCOS Construction. Plumbing and Services Training Package should have the following minimum competency. recognition and experience:

4

• current industry skills directly relevant to the training and assessment being provided; and • their Certificate IV in Training and Assessment.

Drawing together information provided under the two major headings above, and by way of example, a person wanting to assess CPC40110 Certificate IV in Building and Construction (Building) would need to hold the CPC40110 qualification.

If the potential assessor did not hold that qualification then the RTO that contracts the assessor would need to hold evidence that the person has achieved the requirements of CPC40110. To do this an RTO would need to have some form of capability mapping (commonly referred to as an Assessor Matrix) on a unit of competency level to show how the assessor not holding CPC40110 has met the competency requirements of CPC40110.

People who hold other qualifications other than in this case. CPC41110, such as other vocational education and training qualifications or qualifications from higher education institutions are not automatically deemed appropriate as assessors. For example. people who hold various engineering or architectural degrees would not be eligible undertake assessments against CPC40110 unless the RTO considered that they had the equivalent competencies required of CPC40110 and were able to demonstrate this through an Assessor Matrix or similar documented process (refer Attachment 3).

I hope this information and that provided in the attachments addresses your query.

David Magee Deputy Chief Executive Officer and Senior Project Manager

Attachments: Attachment 1 - CPC08 Extract - Requirements for Assessors from CPC08 Version 9 Attachment 2 - Standards for Registered Training Organisations (RT0s) 2015 Attachment 3 - CPS1SC Advice re the CPSISC Training Packages Attachment 4 - CPCCBS6002

Page I 4

7

8

Annexure A (ii) Extracts from Construction Training Package

pertaining to the requirements for Assessors of National Building Qualifications

11

Annexure A (iii) Extracts from Construction Training Package

pertaining to the requirements for Assessors of National Building Surveying Qualifications

18

Annexure A (iv) Formal advice from the

Construction and Property Services Industry Skills Council (CPSISC) with regards to RTOs complying with the

Construction Training Package’s requirements for Assessors

22

Annexure B

The Actual Content of Civil/Structural Engineering Degrees _______________________________________________________________________________________ As an example, below is the course structure of the UNSW Bachelor of Civil Engineering degree, the same programme as that now offered by the Australian Defence Force Academy (ADFA) and UNSW:

Yr 1 - Maths 1A (Maths 1A and /or Higher Maths 1A) Maths 1B (Maths 1B and /or Higher Maths 1B) Physics (Physics 1 and or Higher Physics) Engineering Design and Innovation Computing Engineering Mechanics for Civil Engineers Engineering Surveying and GIS Engineering Materials and Chemistry

Yr 3 - Applied Geotechnic and Engineering Geology Structural Analysis and Modelling Sustainable Transport and Highway Engineering Water Resources Engineering Civil Engineering Practice Engineering Operations and Control Structural Behaviour and Design Water and Waste Water Engineering

Yr 2 - Mechanics of Solids Principles of Water Engineering General Education Maths 2E Engineering Computations for Civil Engineers Engineering Construction Soil Mechanics Materials and Structures

Yr 4 - Honours Thesis A or Design Practice A Honours Thesis B or Design Practice B General Education Professional Electives 1,2,3,4 and 5

Quite simply apart from the odd subject pertaining to Surveying, there is little or no connection to building, building surveying and/or construction management - nor will you even find where they study the Timber Framing Code let alone the BCA, NCC, management of a building site, contracts etc. Engineering is a design profession which uses scientific principles to solve design problems, not running construction sites.

Whereas in some States, such as WA - the University of Western Australia you can become a Civil Engineer after

completing ‘any degree’ followed by just a 2 year Master of Professional Engineering degree:

Step 1

Complete any undergraduate bachelor’s course {Bachelor of Arts, Bachelor of Commerce, Bachelor of Design,

Bachelor of Science or the Bachelor of Philosophy (Honours)} with a major in Engineering Science as your first

degree.

Step 2

Complete the postgraduate Master of Professional Engineering to qualify as a civil engineer.

And based on current ACT rules they then have virtually unfettered access to be licensed as a Builder and

Building Surveyor.

23

UNSW – Engineering (Civil) Yr 1 - Maths 1A (Maths 1A and /or Higher Maths 1A) Maths 1B (Maths 1B and /or Higher Maths 1B) Physics (Physics 1 and or Higher Physics) Engineering Design and Innovation Computing Engineering Mechanics for Civil Engineers Engineering Surveying amd GIS Engineering Materials and Chemistry Yr 2 - Mechanics of Solids Principles of Water Engineering General Education Maths 2E Engineering Computations for Civil Engineers Engineering Construction Soil Mechanics Materials and Structures Yr 3 - Applied Geotechnic and Engineering Geology Structural Analysis and Modelling Sustainable Transport and Highway Engineering Water Resources Engineering Civil Engineering Practice Engineering Operations and Control Structural Behaviour and Design Water and Waste Water Engineering Yr 4 - Honours Thesis A or Design Practice A Honours Thesis B or Design Practice B General Education Professional Electives 1,2,3,4 and 5

24

Sydney University – Engineering (Civil)

Year 1 - Semester 1

Type CP CP From

Core 6 ENGG1800: Introduction to Engineering Disciplines

Core 6 ENGG1801: Engineering Computing

Core 3 MATH1001: Differential Calculus

Core 3 MATH1002: Linear Algebra

Core 6 PHYS1001: Physics 1 (Regular)

Year 1 - Semester 2

Type CP CP From

Core 6 ENGG1802: Engineering Mechanics

Core 6 ENGG1803: Professional Engineering 1

Core 6 GEOL1501: Engineering Geology 1

Core 3 MATH1003: Integral Calculus and Modelling

Core 3 MATH1005: Statistics

Year 2 - Semester 1

Type CP CP From

Core 6 CIVL2110: Materials

Core 6 CIVL2201: Structural Mechanics

Core 6 CIVL2810: Engineering Construction and Surveying

Core 6 MATH2061: Linear Mathematics and Vector Calculus

Year 2 - Semester 2

Type CP CP From

Core 6 CIVL2230: Introduction to Structural Concepts and Design

Core 6 CIVL2410: Soil Mechanics

Core 6 CIVL2611: Introductory Fluid Mechanics

Recommended Yr2 6 Select from Unit Block: Recommended Yr2 or other units.

http://cusp.sydney.edu.au/students/view-unit-page/alpha/ENGG1800


http://cusp.sydney.edu.au/students/view-unit-page/alpha/MATH1001


http://cusp.sydney.edu.au/students/view-unit-page/alpha/PHYS1001



http://cusp.sydney.edu.au/students/view-unit-page/alpha/GEOL1501



http://cusp.sydney.edu.au/students/view-unit-page/alpha/CIVL2110







http://cusp.sydney.edu.au/students/view-degree-page/degree_id/4#view_unit_block_3023


25

Year 3 - Semester 1

Type CP CP From

Core 6 CIVL3010: Sustainable Systems Engineering

Core 6 CIVL3205: Concrete Structures 1

Core 6 CIVL3612: Fluid Mechanics

Core 6 CIVL3812: Project Appraisal

Year 3 - Semester 2

Type CP CP From

Core 6 CIVL3206: Steel Structures 1

Recommended Yr3 18 Select from Unit Block: Recommended Yr3

Year 4 - Semester 1

Type CP CP From

Core 6

CIVL4024: Engineering Project A Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace CIVL4024 with CIVL4022.

Core 6 CIVL4811: Engineering Design and Construction

Core 0 ENGG4000: Practical Experience

Recommended Yr4 Electives

12 Select from Unit Block: Recommended Yr4 Electives

Year 4 - Semester 2

Type CP CP From

Core 6

CIVL4025: Engineering Project B Note: Students with ISWAM of 65% or greater are eligible for Honours pathway and can replace CIVL4025 with CIVL4023.

Core 6 CIVL4903: Civil Engineering Design

Recommended Yr4 Electives

12 Select from Unit Block: Recommended Yr4 Electives



















26

UTS – Engineering (Civil)

Civil Engineering Major

Year 1

Autumn semester

33130 Mathematical Modelling 1 6cp

48230 Engineering Communication 6cp

68037 Physical Modelling 6cp

48310 Introduction to Civil and Environmental Engineering 6cp

Spring semester


48321 Engineering Mechanics 6cp

48320 Surveying 6cp

60101 Chemistry and Materials Science 6cp

Year 2

Autumn semester

48240 Design and Innovation Fundamentals 6cp

48221 Engineering Computations 6cp

48331 Mechanics of Solids 6cp

48340 Construction 6cp

41035 Engineering Practice Preparation 1 3cp

Spring semester

41036 Engineering Professional Experience 1 6cp

41037 Work Integrated Learning 1 12cp

Year 3

Autumn semester

48250 Engineering Economics and Finance 6cp

48330 Soil Behaviour 6cp

48349 Structural Analysis 6cp

48352 Construction Materials 6cp

41038 Engineering Practice Reflection 1 3cp

Spring semester

48260 Engineering Project Management 6cp

48353 Concrete Design 6cp

48641 Fluid Mechanics 6cp

48370 Road and Transport Engineering 6cp

http://handbook.uts.edu.au/subjects/33130.html
























27

Year 4

Autumn semester

48270 Entrepreneurship and Commercialisation 6cp

48350 Environmental and Sanitation Engineering 6cp

48360 Geotechnical Engineering 6cp

48362 Hydraulics and Hydrology 6cp


Spring semester



Year 5

Autumn semester


41029 Engineering Research Preparation 6cp

48366 Steel and Timber Design 6cp

Select 12 credit points of options 12cp

Spring semester

48389 Computer Modelling and Design 6cp

41030 Engineering Capstone 6cp


UTS – Engineering (Civil) Civil Engineering major, Construction Specialisation,

Year 1

Autumn semester





Spring semester



48320 Surveying 6cp






















28

Year 2

Autumn semester






Spring semester



Year 3

Autumn semester






Spring semester




16314 Construction Technology 3 6cp

Year 4

Autumn semester



16912 Site Management 6cp



Spring semester



Year 5

Autumn semester



Select 6 credit points from the following: 6cp



16263 Design Team Management 6cp

48850 Environmental Planning and Law 6cp
































29


Spring semester





16263 Design Team Management 6cp




UTS – Engineering (Civil) Civil Engineering major, Structures specialisation

Year 1

Autumn semester





Spring semester



48320 Surveying 6cp


Year 2

Autumn semester






Spring semester



Year 3

Autumn semester






























30


Spring semester





Year 4

Autumn semester




48350 Environmental and Sanitation Engineering 6cp





Spring semester



Year 5

Autumn semester


48371 Advanced Engineering Computing 6cp




Spring semester


48389 Computer Modelling and Design 6cp




















31

UTS – Engineering (Civil) Civil and Environmental Engineering major

Year 1

Autumn semester





Spring semester



65111 Chemistry 1 6cp

48320 Surveying 6cp

Year 2

Autumn semester



48821 Principles of Environmental Engineering 6cp



Spring semester



Year 3

Autumn semester




48840 Water Supply and Wastewater Engineering 6cp


Spring semester



48860 Pollution Control and Waste Management 6cp


























32

Year 4

Autumn semester



41011 Environmental Chemical Processes 6cp



Spring semester



Year 5

Autumn semester






Spring semester


41009 Renewable Energy Technology 6cp

48881 Water and Environmental Design 6cp


















33

UWS - Engineering (Civil) Year 1 Session 1 Autumn » 200237 Mathematics for Engineers 1

» 300027 Engineering Computing » 300963 Engineering Physics » 300964 Introduction to Engineering Practice

Session 2 Spring » 200238 Mathematics for Engineers 2

» 300021 Electrical Fundamentals » 300463 Fundamentals of Mechanics » 300965 Engineering Materials

Year 2 Session 3 Autumn » 300731.2 Soil Engineering

» 300040.2 Mechanics of Materials » 300762.2 Fluid Mechanics » 300482.2 Engineering Geology and Concrete Materials

Session 4 Spring » 300733.2 Introduction to Structural Engineering

» MG102A.4 Management Foundations » 300738.3 Surveying for Engineers » 300765.2 Hydraulics

Year 3 Session 5 Autumn » 300732.2 Structural Analysis

» 300486.2 Infrastructure Engineering » 300766.2 Hydrology » And one elective

Session 6 Spring » 300053.3 Professional Practice

» 300730.2 Steel Structures » 300736.2 Concrete Structures (UG) » And one elective » 300741.2 Industrial Experience (Engineering)

34

Year 4 Session 7 Autumn (Non-Honours) » 300483.4 Engineering Project

300483 Engineering Project in both Autumn and Spring sessions. » 300739.2 Timber Structures (UG) » 300488.3 Numerical Methods in Engineering » And one elective

Session 8 Spring (Non-Honours) » 300483.4 Engineering Project

» 300737.3 Environmental Engineering » 300485.3 Foundation Engineering » And one elective

Year 4 Session 7 Autumn (Honours stream) » 300675.2 Honours Thesis

» 300488.3 Numerical Methods in Engineering » And one elective

Session 8 Spring (Honours stream) » 300675.2 Honours Thesis

» 300485.3 Foundation Engineering » And one elective

35

University of Wollongong – Engineering (Civil)

Subject Session Credit

Points

Year 1

CHEM103 Chemistry for Engineers Autumn 6

ENGG101 Foundations of Engineering Autumn 6

ENGG153 Engineering Materials Autumn 6

MATH141 Foundations of Engineering

Mathematics

Autumn 6

ENGG152 Engineering Mechanics Spring 6

ENGG154 Engineering Design and Innovation Spring 6

MATH142 Essentials of Engineering Mathematics Spring 6

PHYS143 Physics for Engineers Spring 6

Year 2

CIVL296 Engineering Computing Autumn 6

ENGG251 Mechanics of Solids Autumn 6

ENGG252 Engineering Fluid Mechanics Autumn 6

MATH283 Mathematics 2E for Engineers Part 1 Autumn 6

CIVL245 Construction Materials Spring 6

CIVL272 Surveying Spring 6

ECTE290 Fundamentals of Electrical Engineering Spring 6

EESC252 Geology for Engineers 1 Spring 6

Year 3

CIVL311 Structural Design 1 Autumn 6

CIVL322 Hydraulics and Hydrology Autumn 6

CIVL352 Structures 1 Autumn 6

CIVL361 Geomechanics Autumn 6

CIVL314 Structural Design 2 Spring 6

CIVL394 Construction Spring 6

plus Two elective as specified below Spring 6

Year 4

CIVL462 Principles of Foundation Engineering Autumn 6

ENGG461 Managing Engineering Projects Autumn 6

CIVL444 Civil Engineering Design Spring 6

CIVL454 Structures 2 Spring 6

ENGG454 Professional Experience 0

ENGG456 Engineering Project A Autumn/Spring 6

or

ENGG452 Thesis A Annual 12

http://www.uow.edu.au/handbook/yr2014/ug/H14006069.html





























36

or

ENGG453 Thesis B ** Annual 18

plus Electives as specified below Autumn/Spring


37

Southern Cross University – Engineering (Civil) Year 1, Session 1

ENG10759 - Processes and Philosophy of Engineering

PHY10760 - Physics and Materials

MAT10251 - Statistical Analysis

Choose either: BIO10187 - Global Environmental Issues OR MAT10001 - Foundation Mathematics

Note 2

Year 1, Session 2

ENG10758 - Humanitarian Engineering Project

ENG10757 - Applied Mechanics

MAT10719 - Calculus

CHE00201 - Chemistry

Year 2, Session 1

ENG20001 - Mechanics of Materials

ENG20005 - Hydrology

MAT10720 - Linear Algebra

ENG20002 - Engineering Construction and Economics

Year 2, Session 2

ENG20003 - Concrete Structures

ENG20006 - Fluid Mechanics

ENG20007 - Engineering Computations

AGR00215 - Water and Catchment Management

Year 3, Session 1

ENG30004 - Analysis and Computer Modelling of Structures

ENG30002 - Soil Mechanics and Geology

ENG30010 - Traffic and Road Safety Engineering

ENG30009 - Hydraulic Engineering

Year 3, Session 2

ENG30005 - Design of Structures

ENG30007 - Geotechnical Engineering

ENG30011 - Regional and Urban Transport Planning

ENG30012 - Water and Wastewater Engineering

http://courses.scu.edu.au/units/eng10759-processes-and-philosophy-of-engineering/2015

http://courses.scu.edu.au/units/phy10760-physics-and-materials/2015

http://courses.scu.edu.au/units/mat10251-statistical-analysis/2015

http://courses.scu.edu.au/units/bio10187-global-environmental-issues/2015

http://courses.scu.edu.au/units/mat10001-foundation-mathematics/2015

http://courses.scu.edu.au/units/mat10001-foundation-mathematics/2015

http://courses.scu.edu.au/courses/bachelor-of-engineering-honours-in-civil-engineering#note-10238


http://courses.scu.edu.au/units/eng10758-humanitarian-engineering-project/2015

http://courses.scu.edu.au/units/eng10757-applied-mechanics/2015

http://courses.scu.edu.au/units/mat10719-calculus/2015

http://courses.scu.edu.au/units/che00201-chemistry/2015

http://courses.scu.edu.au/units/eng20001-mechanics-of-materials/2015

http://courses.scu.edu.au/units/eng20005-hydrology/2015

http://courses.scu.edu.au/units/mat10720-linear-algebra/2015

http://courses.scu.edu.au/units/eng20002-engineering-construction-and-economics/2015

http://courses.scu.edu.au/units/eng20003-concrete-structures/2015

http://courses.scu.edu.au/units/eng20006-fluid-mechanics/2015

http://courses.scu.edu.au/units/eng20007-engineering-computations/2015

http://courses.scu.edu.au/units/agr00215-water-and-catchment-management/2015

http://courses.scu.edu.au/units/eng30004-analysis-and-computer-modelling-of-structures/2015

http://courses.scu.edu.au/units/eng30002-soil-mechanics-and-geology/2015

http://courses.scu.edu.au/units/eng30010-traffic-and-road-safety-engineering/2015

http://courses.scu.edu.au/units/eng30009-hydraulic-engineering/2015

http://courses.scu.edu.au/units/eng30005-design-of-structures/2015

http://courses.scu.edu.au/units/eng30007-geotechnical-engineering/2015

http://courses.scu.edu.au/units/eng30011-regional-and-urban-transport-planning/2015

http://courses.scu.edu.au/units/eng30012-water-and-wastewater-engineering/2015

38

Year 4, Session 1

ENG40007 - Engineering Project Management and Professional Ethics

ENG40001 - Engineering Thesis I

Note 3

ENG40006 - Municipal Infrastructure Design and Surveying

CHOOSE 1 UNIT SUBJECT TO UNIT AVAILABILITY FROM: GLY00223 - Introduction to Geographic Information Systems OR ENV00207 - Environmental Planning OR BIO00244 - Protected Area Management OR ECO00202 - Ecological and Environmental Economics for Sustainable Development

Year 4, Session 2

ENG40004 - Engineering Thesis II

Note 3

ENG40005 - Engineering Capstone Project

http://courses.scu.edu.au/units/eng40007-engineering-project-management-and-professional-ethics/2015

http://courses.scu.edu.au/units/eng40001-engineering-thesis-i/2015



http://courses.scu.edu.au/units/eng40006-municipal-infrastructure-design-and-surveying/2015

http://courses.scu.edu.au/units/gly00223-introduction-to-geographic-information-systems/2015

http://courses.scu.edu.au/units/gly00223-introduction-to-geographic-information-systems/2015

http://courses.scu.edu.au/units/env00207-environmental-planning/2015

http://courses.scu.edu.au/units/bio00244-protected-area-management/2015

http://courses.scu.edu.au/units/bio00244-protected-area-management/2015

http://courses.scu.edu.au/units/eco00202-ecological-and-environmental-economics-for-sustainable-development/2015

http://courses.scu.edu.au/units/eco00202-ecological-and-environmental-economics-for-sustainable-development/2015

http://courses.scu.edu.au/units/eng40004-engineering-thesis-ii/2015



http://courses.scu.edu.au/units/eng40005-engineering-capstone-project/2015

39

Annexure C

The Actual Content of Architecture Degrees

__________________________________________________________________________________ Again, examining the content of the UNSW architecture programme, you will find that architects actually complete far more Construction in their first degree than is contained in any engineering degree:

Yr 1- Semester 1

ARCH1101 Architectural Design Studio 1 (6 UOC) ARCH1142 Architectural Communications (6 UOC) ARCH1161 Environment 1 (6 UOC) BENV1080 Enabling Skills (6 UOC) Semester 2 ARCH1102 Architectural Design Studio 2 (6 UOC) ARCH1121 Architectural Hist & Theory 1 (6 UOC) ARCH1162 Structures & Construction 1 (6 UOC) Open Elective (6 UOC)

Yr 3 - Semester 1 ARCH1301 Architectural Design Studio 5 (12 UOC) ARCH1361 Environment 2 (6 UOC) Interdisciplinary Learning Course* (6 UOC) Semester 2 ARCH1302 Architectural Design Studio 6 (12 UOC) ARCH1322 Arch History & Theory 3 (6 UOC) Interdisciplinary Learning Course* (6 UOC)

Yr 2- Semester 1 ARCH1201 Architectural Design Studio 3 (6 UOC) CODE2170 Building Information Modelling (6 UOC) Open Elective (6 UOC) General Education (6 UOC) Semester 2 ARCH1202 Architectural Design Studio 4 (6 UOC) ARCH1222 Architectural Hist & Theory 2 (6 UOC) ARCH1261 Structures and Construction 2 (6 UOC) General Education (6 UOC)

Whilst at the some universities such as the University of Sydney, it is not until the Master degree that the students even undertake a subject called Building Technology. It must be noted that unlike the UK, Europe and America – in this country neither architects nor building designers have never 'signed off' buildings for compliance with the BCA, the NCC, any Codes or Standards or even the conditions for development consent. Architecture is a Fine Art and is not concerned with the running of construction sites - even in the UK architecture and building design are recognised as being fine arts -with degrees (acceptable for registration to practice as an architect) being offered by the Royal Academy of Art for a century or so. WE ACKNOWLEDGE THAT ARCHITECTURE QUALFICATIONS ARE NO LONGER ACCEPTABLE FOR A CLASS A BUILDERS LICENCE BUT THOSE WITH DRAFTING AND BUILDING DESIGN QUALIFCATIONS CASN STILL ACQUIRE CLASS B AND C LICENCES AND THIS IS DESPITE THE FACT THAT IN NSW (for example) THE ONLY INDIVIDUALS PERMITTED TO TEACHE DRAFTING AND BUILDING DESIGN ARE THOSE WITH ARCHITECTURE DEGREES – this appears to be an oversight.

41

University of Canberra – Bachelor of Arts (Architecture)

YEAR-1 Semester 1 Semester 2 12cp 12cp 8314 Design Studio 1.1 8322 Visual Representation 8335 Technology Laboratory 9799 Foundations of Professional Planning

8330 Digital Environment 8405 Design Studio 1.2 (Architecture) 9774 History & Theory 1: Introduction to Architecture History Res Choice Faculty of Arts

YEAR-2 Semester 1 Semester 2 12cp 12cp 8397 Architecture Technology 1 9769 Design Communications 9777 Design Studio 2.1 (Architecture) Open Elective

9775 History & Theory 2: Modernity & 20th Century Architecture 9778 Design Studio 2.2 (Architecture) 9779 Sustainable Environmental Techniques Open Elective

YEAR-3 Semester 1 Semester 2 12cp 12cp

8399 Design Studio 3.1 (Architecture) 8402 Architecture Technology 2 Open Elective

8404 Design Studio 3.2 (Architecture) Graduation Studio 9776 History & Theory 3: Architecture and the City Open Elective

University of Canberra – Master of Architecture YEAR-1

Semester 1 Semester 2 12cp 12cp 7628 Architecture Studio 1 PG 9780 Advanced History & Theory 1 PG FAD Research Unit or elective

7893 Architecture Studio 2 PG 8413 Advanced Technology 1 PG FAD Research Unit or elective

YEAR-2 Semester 1 Semester 2 12cp 12cp

7894 Architecture Studio 3 PG 9781 Advanced History & Theory 2 PG FAD Research Unit or elective

8410 Architecture Practice PG 8415 Architecture Studio 4 PG FAD Research Unit or elective

http://www.canberra.edu.au/coursesandunits/unit?unit_cd=8314


















































42

UNSW – Bachelor of Architectural Studies Year 1

Semester 1 ARCH1101 Architectural Design Studio 1 (6 UOC) ARCH1142 Architectural Communications (6 UOC) ARCH1161 Environment 1 (6 UOC) BENV1080 Enabling Skills (6 UOC) Semester 2 ARCH1102 Architectural Design Studio 2 (6 UOC) ARCH1121 Architectural Hist & Theory 1 (6 UOC) ARCH1162 Structures & Construction 1 (6 UOC) Open Elective (6 UOC) Year 2

Semester 1 ARCH1201 Architectural Design Studio 3 (6 UOC) CODE2170 Building Information Modelling (6 UOC) Open Elective (6 UOC) General Education (6 UOC) Semester 2 ARCH1202 Architectural Design Studio 4 (6 UOC) ARCH1222 Architectural Hist & Theory 2 (6 UOC) ARCH1261 Structures and Construction 2 (6 UOC) General Education (6 UOC) Year 3

Semester 1 ARCH1301 Architectural Design Studio 5 (12 UOC) ARCH1361 Environment 2 (6 UOC) Interdisciplinary Learning Course* (6 UOC)

Semester 2 ARCH1302 Architectural Design Studio 6 (12 UOC) ARCH1322 Arch History & Theory 3 (6 UOC) Interdisciplinary Learning Course* (6 UOC)

UNSW – Master of Architecture Year 1 Semester 1 Architectural Design Studio 1, 2, 3, and 4 Professional Practice

Semester 2 Architectural Design Studio 1, 2, 3, and 4 Architectural Environment and Building Services Advanced Construction and Structures

Year 2 Semester 1 Graduation Research Studio – Stream Specific Studio

Semester 2 Graduation Research Studio – Stream Specific Studio

University of Newcastle – Bachelor of Design (Architecture)

Core Courses

ARBE1100 Communication in the Built Environment 1 10 units

http://www.handbook.unsw.edu.au/undergraduate/courses/2015/ARCH1101.html



http://www.handbook.unsw.edu.au/undergraduate/courses/2015/BENV1080.html





http://www.handbook.unsw.edu.au/undergraduate/courses/2015/CODE2170.html








http://www.newcastle.edu.au/course/ARBE1100


43

ARBE1101 Construction Technology 1 10 units

ARBE1102 Construction Ecology 1 10 units


ARBE1104 History and Theory in the Built Environment 1 10 units

ARBE1200 Architectural Design 1A 10 units

ARBE1220 Architectural Design 1B 20 units












University of Newcastle – Master of Architecture

Core Courses

Complete the following core courses to fulfil the requirements of this program.

Code Name Units

ARBE4102 Construction Technology and Services 10 units

ARBE4121A Research in the Built Environment A 10 units

ARBE4121B Research in the Built Environment B 20 units




ARBE6201 Architectural Management 10 units

ARBE6202 Architectural Practice 10 units



University of Sydney – Bachelor of Design in Architecture

BDES1011 Architectural History/Theory 1

BDES1023 Architectural Technologies 1

BDES1026 Architecture Studio 1A

BDES1027 Architecture Studio 1B



































http://gradschool.edu.au/courses/details/ARBE4102

http://gradschool.edu.au/courses/details/ARBE4121A

http://gradschool.edu.au/courses/details/ARBE4121B








44

BDES2013 Architectural Technologies 2

BDES2024 Art Workshop 2



BDES3011 Architectural History/Theory 3



AWSS1001 Architectural Sketching and Drawing

BDES3025 Architectural Professional Practice

AWSS1001 Architectural Sketching and Drawing

DECO1012 Design Programming

DESA1004 Designing with Surfaces and Light

DESP1001 Introductory Urban Design and Planning

AWSS2010 Architecture & Design Ceramic Processes

AWSS2015 Generative Drawing

AWSS2020 Object Design

AWSS2023 Architectural Photography 1

AWSS2026 2D Print Processes in Design

AWSS2027 Architecture & Design Material Processes

DAAE2001 20th Century Australian Architecture

DAAE2002 Architecture, Place and Society

DAAE2005 Designing with Colour

DAAE2008 Innovative Building Structures

DAAE2009 Designing Effective Visual Communication

DAAE3001 Sustainable Architectural Practice

DECO2010 Designing Social Media

DECO2101 Visual Communication

DECO2102 Web Design and Technologies

DECO2103 3D Modelling and Fabrication

DECO3003 Design Computing Research Opportunity

DECO3005 Advanced Interaction Design

DECO3006 Principles of Animation

DESA3441 Design Architecture Independent Study A

DESA3442 Design Architecture Independent Study B

DESA3443 Design Architecture Independent Study C

DESA3444 Design Architecture Independent Study D

DESA3552 Design Architecture General Elective B

DESA3553 Design Architecture General Elective C

DESA3554 Design Architecture General Elective D

University of Sydney – Master of Architecture

45

Core Units MARC4001 Urban Architecture Research Studio

MARC4002 Sustainable Architecture Research Studio

MARC4003 Digital Architecture Research Studio

MARC5001 Graduation Studio

MARC4101 Advanced Technologies 1

MARC5101 Advanced Technologies 2

MARC4102 Modern Architectural Theory

MARC4201 Modern Architectural History

MARC5102 Contract Documentation

46

UTS – Bachelor of Design in Architecture

First year

Autumn semester

11211 Architectural Design: Forming

11212 Architectural History and Theory: Orientations

11205 Architecture and Landscape Cultures

11214 Architectural Design: Architectural Communications

Spring semester

11209 Architectural Design: Making

11216 Architectural History and Theory: Modernity and Modernism

11206 Introduction to Construction and Structural Synthesis

11208 Architectural Design: Architectural Communications 2

Second year

Autumn semester

11221 Architectural Design: Strategy

11248 Architectural History and Theory: Urbanism and the City

11207 Architectural Design and Construction

Select 6 credit points of electives:

Spring semester

11222 Architectural History and Theory: Critique

11227 Architectural Design: Performance

11225 Thermal Design and Environmental Control


Third year

Autumn semester

11231 Architectural Design: Field

11232 Lighting, Acoustics and Advanced Environmental Control

11233 Advanced Architectural Construction


Spring semester

11234 Architectural Design: Integration

11247 Architectural History and Theory: Current Events and Debates

11204 Integrated Systems

Select 6 credit points of electives

UTS – Master of Architecture





















47

First year

Autumn semester

11502 Architectural Practice: Finance and Project Management

11551 Masters Architectural Design Studio 1

Select 6 credit points from the following:

CBK90795 Electives

Spring semester

11501 Architectural Practice: Advocacy



CBK90795 Electives

Second year

Autumn semester

11504 Architectural Practice: Research Cultures



CBK90795 Electives

Spring semester

11503 Architectural Practice: The Profession

Select one of the following:


11555 Masters Architectural Design Thesis


CBK90795 Electives



http://handbook.uts.edu.au/directory/cbk90795.html











48

Annexure D

A Legal Ambit of the AIB’s Role

49

‘In the long run, standards are kept, whether by individuals or groups of men, by

pressure from within…You are such an association, formed to provide a joint

conscience, to set up and insist on standards of competence, skill and integrity

in your profession …

You aim to make membership of the Institute not only a guarantee of quality

and of competence, but also a badge of commercial integrity.’

A description of the role of

The Australian Institute of Building

by

Field Marshal Sir William Slim

1st Viscount Slim KG GCB GCMG GCVO GBE DSO MC KStJ

Governor General of the Commonwealth of Australia

at the opening of the 1957 Annual Conference Albert Hall Canberra.

‘With professionalism, and the credentialing of individuals or the

accreditation of courses, come serious responsibilities, especially in matters of

standards and integrity, as all sorts of people have come to expect the highest of

standards from those with whom they deal, and the Institute deserves its high

public standing in such matters.’

An observation about

The Australian Institute of Building

by

The Honourable Justice Terence Sheahan AO

NSW Land and Environment Court

Former NSW Attorney General

at the 2014 AIB Address at the University of Newcastle.

50

The Ambit of the AIB’s Mandate

_________________________________________________________________________________________

51

The AIB’s Mandate in Action – Reports of the Activities of the Various

Chapters to the relevant State Governor. _____________________________________________________________________________________

Past Victorian, Past National President and conjoint Professor (University of Newcastle) Peter Hansen FAIB

(subsequently conjoint Professor Peter Hansan OAM FAIB),

EfyKaragiannis FAIB (then Victorian Chapter President, Adjunct Fellow Holmesglen),

His Excellency Professor, The Honourable David de Kretser AC CVO

Governor of Victoria,

Norm Faifer FAIB

(then Immediate Past Victorian Chapter President, current National President, Honorary Fellow Deakin University ), and

Past Victorian, Past National President and adjunct Professor (RMIT) Tom Morris FAIB

Her Excellency Professor the Honourable Marie Bashir AC CVO,

Governor of New South Wales,

presenting the Past Chapter President Medal to

52

John Smolders FAIB (subsequently conjoint Professor University of Newcastle) with Mrs Smolders

Her Excellency Professor Marie Bashir AC CVO,


presenting the Past NSW Chapter President Medal to

Ross Smith FAIB

(Director of Construction with the Southern Cross Group, Conjoint Fellow the University of Newcastle)

with Mrs Smith

Outgoing WA Chapter President Michael Lawson FAIB,

and Incoming WA Chapter President Graham Teede FAIB presenting their report to

His Excellency Dr Kenneth Michael AC.

53

Michael Lawson FAIB

(Founder and Principal of Northerly Constructions)

receiving his Past Chapter President’s Medal from

His Excellency Dr Kenneth Michael AC.

16 Nov 2010

Tuesday

On this day, at Government House, His Excellency Dr Ken Michael, AC, Governor of Western Australia, received

Mr P Conran, AM, Director General of the Department of Premier and Cabinet. Following this, the Governor

presided over a meeting of the Executive Council. Later that morning, the Governor received Mr G Teede,

President, Mr M Lawson, Past President, and Professor P Davis, Fellow of the Australian Institute of Building

(WA Chapter). In the evening, the Governor hosted a Reception for the Outgoing Chairman of Celebrate WA, Mr

P Fitzpatrick, AM.

John Doust FAIB

(WA Chapter Honour Award recipient for 2011, past WA Chapter President, and past national President of the MBA,

subsequently John Doust AM LFAIB),

Immediate Past WA Chapter President Graham Teede FAIB,

His Excellency Mr Malcolm James McCusker AO (since AC and CVO) QC,

Governor of Western Australia

with

Peter Iancov FAIB

(WA Chapter President and CEO of Doric Constructions)

54

Tony Avsec FAIB (Past Qld Chapter President, adjunct Associate Professor QUT),

Her Excellency Ms Penelope Wensley AC

Governor of Queensland,

Patrick Knight FAIB (Immediate Past Qld Chapter President) and

John Gaskin FAIB

(then Qld Chapter President and chairman of the Queensland Building Services Authority,

subsequently John Gaskin AM FAIB)

Dr William Mansell FAIB DEng (Outgoing Chapter President),

Her Excellency Professor Marie Bashir AC CVO

(subsequently Professor the Honourable Dame Marie Bashir AD CVO HonFAIB)


Christopher Bulmer FAIB

(then NSW Chapter President and National Chief Operating Officer of Hansen Yuncken, Visiting Fellow UTS)

55

Dr William Mansell FAIB DEng (honoriscausa, University of Sydney)

(Outgoing Chapter President and Managing Director of Chadwick Technology)

receiving his Past Chapter President’s Medal

Her Excellency Professor Marie Bashir AC CVO

(subsequently Professor the Honourable Dame Marie Bashir AD CVO HonFAIB)

Governor of New South Wales

________________

South Australian Governor, His Excellency Rear Admiral the Honourable Kevin Scarce AC CSC

presenting

(left) Stuart White FAIB (Adjunct Fellow UniSA) with his Past Chapter President’s Medal

(right) Geoffrey Penley FAIB with his Chapter President’s Medal

56

Tasmanian Governor, His Excellency the Honourable Peter Underwood AC CSC

receiving that Chapter’s Report

from Tasmanian Chapter President Peter Spratt AM FAIB

Tasmanian Governor, His Excellency the Honourable Peter Underwood AC CSC

presenting

Darren Jones FAIB with his Past Chapter President’s Medal

THE NEW SOUTH WALES AND AUSTRALIAN CAPITAL TERRITORY CHAPTER of the

AUSTRALIAN INSTITUTE OF BUILDING - Incorporated by Royal Charter -

To Her Excellency

Professor Marie Bashir AC CVO Governor of New South Wales

Greetings and salutations from the sole professional institution representing Australia's building practitioners, both within the Commonwealth nod abroad, in all the various disciplines of the profession, on this the occasion of the presentation of our report as to the state of the Building Profession in New South Wales.

We report that the Institute's obligations under its Royal Charter:

To promote excellence in the construction of buildings and just and honourable practices in the conduct of business;

To advance the study of building and all kindred matims, arts and sciences;

To encourage the friendly exchange between members of knowledge in practical, technical and ethical subjects; and

To uphold the dignity of the profession of Building and the status of the Institute;

were upheld in this State by the Chapter Committee during 2006-2008 by means 01 8150 meth ities listed hereafter below.

The continued evaluation and subsequent accreditation of building, construction and construction management Bachelor degree programmes at the University of New South Wales, the University of Newcastle, the University of Technology Sydney and the University of Western Sydney; and in the Australian Capital Territory. at the University of Canberra.

The continued evaluation and subsequent endorsement and validation of all building, building services, building surveying and certification, construction, construction fire safety. construction fire safety, and project management Bachelor and Master degree programmes as the University of New South Wales. the University of Newcastle. the University of Sydney.

the University of Technology Sydney and the University of Western Sydney.

The recognition of all the above programmes by the New South Wales Building Professionals Board as fulfilling the educational criteria required for registration as a Principal Catifiing Authority at all grades, and in various specialist categories as a Certifying Authority.

The recognition of the building, construction and construction management Bachelor and Master degree prognmmes listed above. as the only degrees which in their own right fulfil the educational criteria required by the Nevi South Wales Office of Fair Trading for a BuildIng Contractor's Licence:

plus the acceptance and listing by the Matter Builders Association of New South Wales as being the only degree programmes suitable for the Building Cadets of its members as well as recommending the benchmarking of the professional development of these cadets to the standards set by the National Building Professionals Register.

The awarding of the Chapter Medal, to each year's most outstanding graduate front each of the Bachelor degree programmes listed above: the Chapter Pressiktirs Award each year's most outstanding graduate from each of the Master degree programmes listed above;

the Chapter Presdent's Award for the completion of all Doctoral programmes pertaining to building: the Chapter President's Award for the State's most outstanding trade graduates selected from each of any three disciplines, Certificate IV. Diploma and Advanced Diploma programmes:

and the Florence Taylor CBE OBE Medal for the State's single most outsranding trade graduate (regardless of the building industry discipline).

That the occasional awarding of the .Vew South Wales Ronald Albert Swane AM Award for Professional Excellence in Teaching was in the Wm of this Chapter Committee awarded for teaching in the university sector to Willy Sher FAIB (Assistant Dean, Faculty of Engineering and the Built Environment or the University of Newcastle);

and for teaching in the TVET sector, jointly to Clifford McSorley and Keith Falkner MAIB.

Unique recognition both by the New South Wales Consmiction Industry Training Advisory Board and by the Training Package prepared by the Construction and ' uperty Services Industry Skills Council for Contra:aim Iv. Diploma and Advanced Diploma qualifications in Building and Construction. that: MB Membership

(at various grades) as evidence of fulfilment of the Training Package competencies of these qualifications; and registration upon the National Building Professionals Register and also upon the National Building Technologists Register as both being evidence of suitable building industry experience (both in quantum and quality);

that is necessary lobe. Trainer andror ark Assessor of these programmes.

Conducting of an eminent speakers programme, the AID Address, as the above universities which in this term included: the Honourable Terence Cole AO RFD QC; Lieutenant General Ken Gillespie AO DSC CSM: and James Service AO HFAIB.

Whilst in pertain years speakers have included. in order of presentation: the Honourable Sir Laurence Street AC KCMG QC HFAIB: The Honourabk Sir Llewellyn Edwards AC: Colonel Ian Cumming CSC FAIB:

Sir Eric Neal AC CVO HFAIB; the Honourable Sir James Gobbo AC CVO QC: and Sir John Holland AC HFAIB.

Conducting a Continued Professional Development programme recognised by both the Neu South Wales Building Professionals Board and the New South Wales Office of Fair Trading.

Conducting the Professional Excellence in Building Awards which uniquely do not reward the end product but rather the managerial and technical skill of individual project managers, their project teams

and sponsoring employers, from small building projects to those worth many hundreds of millions of dollars. We particularly thank our esteemed judges:

Ronald Bracken FAIB (Past President of the NSW MBA): W James Farrell RA1A MAIPM: Professor Alan Jury FAIB (Foundation Chair of Building and Construction UWS): Arthur Krust LFAIB (Past President of the NSW MBA and Past Chapter President); and Chaired by Robert Whinaker FAIR (National Vice President and Past Chapter President).

The Institute's induction as Fellows of: Andrew Box (Managing Director Southern Cross Constructions); Ronald Bracken (see above); Mitchell Cameron (Sydney Airport Corporation): Mnrray Coleman (CEO Boris Lend Lease UK); Dr William Mansell (Managing Director Chadwick Technology),

Marc Longo (Managing Director St Hilliers Contracting); Brian Seidler (Executive Director NSW MBA): and both die outgoing and incoming Chapter Presidents: all alter having been individually vetted and approved by this Institute's National Council for their personal conmhution to the professional practice of building

As a consequence we report to Her Excellency that the state of the profession in Ness South Wales - notwithstanding the ongoing challenge faced by the higher academic sector in securing proven building industry accredited professionals as lecturers, and by the clamming rept latory and economic landscape faced by industry - inns of this date, sound.

Signed this twenty-fourth day of November. 2008

John Smolders FAIR and Ross Smnn r AIR

Outgoing Chapter President Incoming Chapter Proakent

57

THE NEW SOUTH WALES CHAPTER of the

AUSTRALIAN INSTITUTE OF BUILDING - incorporated by Royal Chatter -

To Her Excellency Professor Marie Bashir AC CVO

Governor of New South Wales Greetings and salutations from the sole professional iostitution representing Australia's building practitioners, both within the Commonwealth and abroad,

in all the various disciplines of the profession, on tbis the occasion of the presentatioo of our report as to the state of the Building Profession in New South Wales.

We report that the institutes obligations touter its Royal Charters

To promote excellence in the construction of buildings and just and honourable practices in Me conduct of business;

To advance the study of building and all kindred matters, arts and sciences;

To encourage the friendly exchange between members of knowledge M practical, technical and ethical subjects; and

To uphold the dignity of the profession of Building and the status of the Institute;

were upheld in this State by the Chapter Committee during 2008-2010 by means of the activities listed hereafter below.

The ostablishmem of an independent and separate ACT Chapter, the first new Chapter within the Commonwealth since (modal°, an initiative of the NSW Chapter.

The continued evaluarion and sobsequent accreditarion of building. conshuction and construction management Bachelor degree programmes m the University of New South Wales, the University of Newcastk and the University of Technology Sydney.

The continued evaluation and subsequent endorsemmt and validation of all building. building services, building surveying and certification, construction, conterunion Ott eafety, and peoject management Bachelor and Master degree programmes at the Uolversity of New South Wales, the University of Newcastle, the University, of Sydney, and the Uniserilly . of Technology Sydney.

The recognition of all the above programmes by the New South Wales Building Profesrionan Board as fulfilling the educational criteria required for registration as a Psinsipal Certitring Authority st all grades. and in V anepeoioh000ogodeoete Certifying Authority.

The recognition of the building. COGAIllerint and construction numagemari Bachelor and Master degree programmes listed Moe. as the only degrees which in their own right fulfil the educational Muria required by the New South Wales Office of Fair Trading for a Building Contractor's Licence;

plus the acceptance and listing by the Master Builders Association of New South Wales as being the only degree programmes suitable for the Building Cadets of its members as well as recommending the benchmarking of the professional developrnem of Mae ceders to the standards set by the National Building Professionals Register.

We note with appresintion the efforts of: tbe NSW Deputy Commissioner of Fair TradinE Steve GriMn; the NSW Fair Trading% • Director of Policy William Murphy, Director of Licensing Daniel Richardson, and Policy Officer Resin Haertoth, for the continued professional and transparent manner In which they have conducted their duties in relation to all of the above by safeguarding the public, specifying the eleedves

required of all TVET programmes recognised for licensing purposes, delivering A113 CPD sessions, for introducing modat (and overdue) rigour into the Owner Builders Forma Course and carrying out much needed reform of Horne Mummy l000es:1..71m valuable effons of the Mauer Builders Aesociation of NSW cannot be overstated with regards to these reforms.

We look forward to the University of Western Sydney re-applying and semen:Eng in rilacquiring mcreenution for Its Bachelor degree, and endorsement for in Master degree programmes In 2011.

The awarding of: the Chapter Medal, mach yeals most outstanding sped.. from each of the Bnhelor degree progremmes listed above; the Chapter PresidentY Award for each yenta most oumanding graduate from each ate Master degree programmes listed above;

the Chapter Presidenry Award for the compinion of all Doctoral programmes pertaining to buildinm the Chapter Pres-Ickes timerd for the Statek most outstanding trade graduates selected from cod of any three disciplines, Certificate IV, Diplome and Advanced Diplome progrommes;

and the Florence Taylor CBE OBE Medal for the Statek single mote outstanding trade gradume (regardless of the building Worley discipline).

The New South Wake Ronald Albert Sloone AM LFAIB Alvaro! for Professional Excellence in Teaching was not awarded in the term of this Chapter Committee

Unique recognition both by the New South Wales Construction Industry Training Advisory Board and by the Training Package prepered by the Construction and Property Services Industry Skills Council for Candle. IV, Diploma and Advanced Diploma qualifications in Building and Construction, thet MB Membership (at various grades) as eMdence of fulfilment :dill the Training Package competencies of these

qualifintiong and registration upon the National Building Profinsionah Register and also upon the Nadonal Building Technologists Register as both being evidence of suitable building industry experience (both in quantum and quality); that is necantry to be a Trainer and/or an Assessor of these programmes.

Conducting of m eminent speakers' programme, theA/B Address, so the above universities which in this term included: Professor Robert Lord May or Oxford OM AC Kt FRS FIFAIII; Professor Murray Coleman FAIB (Global CEO of Bevis Lend Lease)

Whilst in previous years (and throughout Australia) speakers have included. In order of presentation: The Memorable Si, Laurence Street AC KCMG QC HFAIIE The Honourable Sir Llewellyn Edwards AC; Colonel Ian Currants CSC FAIB; Sir McNeal AC CVO FiFAIB:

The Flonourable Sir larnm Gabe AC CVO QC Sir John Holland AC HFAIB (vale); The Honourable Term. Cole AO RFD QC); Lieutenant General Ken Gillespie AO DSC CSM; James S.M. AS HFAIB; ard Janet Holmes e Coon AC HFAIEL

Conducting a Continued Profession] Developmmt programme recognised by bath the New South Wiles Building Profmsionals iinrd and the New South Walm Office of Fair Trading.

Conducting the Professional Excellence in lkilding Awards which uniquely do not reward the end product but rather the managerial and technical skill of individual project Imagers, their project teams and sponsoring employers.

from small building projects to those worth many hundreds of millions of dollars — with a record number of entrants and anendots both in 2009 and 2010, We particularly thank our mlearted judges:

W James Farrell RAIA MA1PM; Professor Alan leery FAIB (Visiting Professor Tokyo Polytechnic University, Foundation Chair of Building and Conn:onion MS); Arthur Krug LFAIB (Past President of the NSW MBA end Peon Chet.. Preside.* debt Bintidtm PAIR (NM chapter Presidm1); and Chaired by Robert Whittaker FAIB (National Vice President and Past Chapter Presidnt).

%thank the Minister of Fair Trading. The Honourable VoginiaYedge MP. mil the Hmourable Sir Lauren. Street AC KCMG QC HFAIB for .lebrating the success ofNSW practitioners at the National Awards at Parliament HOW, an event booed by the Minister.

The appointment of the following distinguished munition,. as Conjoint Professors of Beading Certification and Regulation at the University of Neweastla Professor any Anderson MA1B, Associate Director PLP Building Survegors PtY Ltd:

Professor Kho Lovegrove MAIB, Director Lovegrove Solicitors, former Chan.' of the Victorian Building Practitioners Board, former Deputy CEO of the Australian Building Cedes Board; and Professor Mich.! Wynn•Jaaes MAIB, Dimmer Micbael Wilm-Jorres and Asseciasm, Member of theNSW Building Professionals Board

and the appointment of Pest 55W Chem. Prtsidertis Ron Smith FAIB and John Smolders PAM as Conjoint Senior Fellows (Building and Construction) of the University of Newcastle

in addition to Me past appointment of Professor Prier Hansen FAI13, Chairman onions.= Yunchen fly Ltd, es Conjoint Professor of Building and Construction at the University ofNewnstle.

The Instinnils induction as Fellows of Dan Amory (Regional Director. Brookfield Multiples); George Bards, (NSW Building Marumer,Abigroup); Darid Beach (Director. Hansen Yundten); David Cracknell (Son Project Manager, Leighton C.ontractoril; W James Farrell (Snr Partner Ferm( Mmagement Scrims); Frank Farina (Construction Manager, Parkview);

Sr Perry Forsythe (Associate Prof...Building and Conn:vatic, UTS); Medy Hassan (NationlGeneeal Manger. Hindman:Ilk Km McCracken (Principak KIM Projen Monument); Ben O'Rourke (General Manager Retail Strategic Business Unit. Bovis Lend Lease), Greg Pitartps (Donations Manager, NSW DER Schools Programme, Bovis Lard Lean);

Nona. Tyrrell (Prilect Manager, Paynter and Dboyo); Jason View:nue (NSW Construction Director, Mime); and Ric Wang (NSW Director, %T. Corstmetions): MI alter having bem individually vetted and approved by thLs 'nation); Nacional Cowell for their personal comitribution to the professional practice of building

As a consequence we report to Her Excellency that the Mate of the profession to New South Wales - notwithrtanding the orageing challenge faced by the higher academic sector in securing prover: building Industry accredited professional builders (not confining themsclym to other building industry professionals who porpmt expertise in a profnsion them were not nined or aceredired in, ours)

as tenants, and by the changing regulatory and economic lands:nape faced by industry is as of this date, sound.

Signed this 6th day of October. 2010.

Ross Smith — Dr itr-i711, 1sell FMB PAls DEng(honatis antra)

Inuedine Past Clasper Preillou Chaps. Pretinat

58

AIB 41 NE AUSTRALIAN INSTITUTE OF WILDING

The Annual Report from the Australian Institute of Buildinq South Australian Chapter

to His Excellency Rear Admiral Kevin Scarce AC CSQ

Qovernor of South Australia

On behalf of the Australian Institute of Building, the sole professional institution representing Australia's building practitioners, both within the Commonwealth and abroad, in all the various disciplines of the profession, we take this

opportunity to report on the state of the Building Profession in South Australia.

The Institute's obligations under its Royal Charter are to: > Promote excellence in the construction of buildings and just and honourable practices in the ew.Juct of business;

> Advance the study of building and all kindred matters, arts and sciences; > Encourage the friendly exchange between members of knowledge in practical, technical and ethical subjects; and

> Uphold the dignity of the profession of Building and the status of the Institute;

These objectives were upheld the Chapter Committee during 2010 by means of the following activities.

• The continued evaluation and subsequent accreditation of building, construction and construction management Bachelor degree programmes at the University of South Australia;

• The evaluation and endorsement of all building, building services, building surveying and certification, construction, construction fire safety, and project management Bachelor programmes at the University of South Australia,

• The recognition of the Bachelor of Construction Management and Economics degree delivered by University of South Australia for the first time ever (for any degree of any discipline in this State) as fulfilling in its own right fulfil the educational criteria required by the South Australian Office of Consumer and Business Affairs necessary for a South Australian Building Works Contractor's Licence and Registration as Building Work Supervisor for aa Building Work (Residential, Commercial, Industrial and Civil).

• The recognition of the building, construction and construction management Bachelor degree programmes listed above, as degrees which fulfil the educational criteria required by the Office of Consumer Affairs of South Australia;

• The awarding of: the Chapter Medal, to each year's most outstanding graduate from the Bachelor degree programmes at University of South Australia and the Florence Taylor CBE OBE Medal for the most outstanding trade graduate;

• Conducting of an Eminent Speakers' Programme known as the AM Address, at the University of South Australia which in this term included Colonel Ian Cummings CSC FAIB. Previous years (and throughout Australia) The Honourable Sir Laurence Street AC KCMG QC HFAIB; The Honourable Sir Llewellyn Edwards AC; Professor Robert Lord May of Oxford OM AC Kt FRS HFAIB; Professor Murray Coleman FAIB (Global CEO of Bovis Lend Lease)Sir Eric Neal AC CVO HFAIB; The Honourable Sir James Gobbo AC CVO QC; Sir John Holland AC HFAIB (vale); The Honourable Terence Cole AO RFD QC; Lieutenant General Ken Gillespie AO DSC CSM; James Service AO HFAIB; and Janet Holmes a' Court AC HFAIB.

• Conducting a Continuing Professional Development programme recognised by the Department of Consumer Affairs including subjects on Town Planning, Crane and 1-loisting safety and Construction Law.

• Conducting the Professional Excellence in Building Awards which uniquely do not reward the end product but rather the managerial and technical skill of individual project managers, their project teams and sponsoring employers, from small building projects to multi millions of dollars — with a record number of entrants and attendees both in 2009 and 2010. We particularly thank our esteemed judges Mr Jeremy Whitehead FAIB (AIB National Senior Vice President) Associate Professor George Zillante FAIB (Head of School, Built Environment University of South Australia) Mr Stephen Fry and Mr Graham Fricker LFAIB (Past AIB National President).

• The Institute's induction as Fellows for Mr Andrew Marshall FAIB (Marshall Broughton) and Mr Geoff Penley FAIB (Built Environs). The Award of Fellowship of the AIB comes after being individually vetted and approved by this Institute's National Council for their personal contribution to the professional practice of building.

Ass consequence we report to His Excellency that the state of the profession in South Australia is sound, notwithstanding the ongoing challenges faced by the higher academic sector in securing proven building industry accredited professional

builders as teaching staff, and by the changing regulatory and economic landscape faced by industry

Signed this 3ra day of May 2011.

Andrew Marshall FAIB

Immediate Past Chapter President

Stuart White MAIB

Chapter President

62

supplementary annexures to hbfc · pdf filesupplementary annexures to hbfc submission annexure...

Documents