supermicro all-in-one zero-channel raid controller family copyright © 2005 supermicro computer,...
TRANSCRIPT
Supermicro All-in-One Zero-Channel RAID
Controller Family
Copyright © 2005 Supermicro Computer, Inc.September 22, 2005
AOC-LPZCR1
AOC-SOZCR1
Supermicro All-in-One ZCR Cards
• All-in-One Zero-Channel RAID Cards: AOC-LPZCR1 and AOC-SOZCR1.
• Take advantage of onboard SAS/SATA/SCSI Host controllers to achieve hardware RAID.
• Support SAS/SATA/SCSI modes by jumper settings. Saving cost without buying two more separate cards.
• Better performance, cost-effective and complete solution.
• Will replace the old Adaptec SCSI DAC-0008(2010S), DAC-0009(2015S), SATA AOC-2020SA and AOC-2025SA.
• They are available NOW.
• Will support SAS SES-II enclosure management functionalities in the near future.
Supermicro AOC-LPZCR1 & AOC-SOZCR1
• Highlight:
• Support SAS, SATA and SCSI operating modes.
• Intel 400MHz I/O processor w/ 64MB onboard memory.
• Running up to PCI-X 100 MHz.
• AOC-LPZCR1:
• Support Supermicro SAS/SATA/SCSI boards on Green Slots.
• X6DH3-G2, X6DHP-3G2 (SAS). X6DH8-G, X6DH8-G2, H8DA8 (SCSI).
• X6DHT-G, X6DHP-TG, X6DAT-G, X6DAL-TB2, H8DAR-T (SATA).
•AOC-SOZCR1:
• Advantage for 1U system by saving one PCI slot.
• Support Supermicro SAS/SATA/SCSI boards on Socket DIMM.
• X6DHR-3G2 (SAS). X6DHR-TG, 6014H-T (SATA).
• X5DPR-8G2, X5DPR-8G2+, H8DAR-8 (SCSI).
Software Features
• Operating Systems:
• Windows: 2000/XP/2003. Linux: SuSE 9.0/9.1/9.2, Red Hat 3.0/4.0 .
• Key features:
• RAID detection, buildup, delete, error indication.
• RAID Levels 0, 1, 5, 10 and JBOD. RAID 50 only for SAS.
• Disk initialization, verification and fix.
• Hot-spare disk drive support with automatic rebuild.
• Management Software:
• Storage Manager (ASM), Configuration Utility (ACU), Flash Utility (AFU).
SAF-TE Enclosure Management
• SCSI Accessed Fault Tolerant Enclosures. Industry standard to interface with enclosed components
• Can enable only for major OEM customers with special consideration.
• Indicate disk drives failure with alarm and LED.
• Indicate disk drives rebuild through LED.
• Avoid human error, such as pulling out wrong disk drives.
• Temperature monitoring.
• Controlled by GEM424 firmware and I2C interface.
Adaptec Storage Manager (ASM)
Adaptec Configuration Utility (ACU)