superfix a leader in customer · pdf filewe distribute our semi-finished tool steels from...

i

SUPERFIX® A LEADER IN CUSTOMER SERVICE

Superfix (Singapore) Pte Ltd126 Genting Lane, Singapore 349576

Tel: (65) 6748 2122 Fax: (65) 6747 9838 Email: [email protected] Website: www.superfix.com.sg

Introduction

Superfix offers a wide range of semi-finished products made from morethan 100 different Tool Steels. These consist of rods, plates, heavy-walledand thin-walled tubes, and sections in stock.

We distribute our semi-finished Tool Steels from Singapore to around theglobe for commerce with various industries. We are able to help you getany facts and figures you need on non-standard materials. Ourprofessional sales team places customer satisfaction as a top priority,attending to your various needs.

Key features of the system we implemented are the advisory serviceprovided by our engineers, and a customer oriented logistics concept.

We specialise in the fabrication of Semi-Finished Tool Steels, and offer acomplete range of service to our customers, from basic to complexfabrication. There are no restrictions on the minimum quantity ordered.We have produced quantities from one or two pieces up to one millionpieces.

If your product requires a secondary operation such as drilling, tappingor punching, we have the equipment and knowledge to perform the work.For the more demanding machining work requiring close-tolerance, ourCNC machines centre provides us with both accuracy and flexibility. Ourin-house coordinates measuring machine enables us to inspect thematerial to our customers' specifications.

The fabrication services listed above are only a brief overview of ourcapabilities. Send us your blue prints and specifications for a promptquote without obligation.

For any enquiries, email us or contact us.

SUPERFIX®

• A Leader in Customer Service

• Products Of Consistent Quality

• Continuous Research & Development

• Competitive Pricing



ii


Mission Statement 1

Company Profile 1

Important Note 2

Industry Applications 3-4

COLD WORK STEEL

1.2210 Wear Resistant Cr-V-Alloyed Steel 5-6

1.2510 Medium Alloyed Cold Work Steel 7-10

1.2510 (PG) Precision Ground Flat Bar 11-12

1.2363 Medium Alloyed Cold Work Steel 13-14

1.2379 Ledeburitic 12% Chrome Steel 15-18

1.2379 (PG) Precision Ground Flat Bar 19

1.2436 Ledeburitic 12% Chrome Steel 20-22

1.2767 Nicked Alloyed Cold Work Steel 23-24

HOT WORK STEEL

1.2344 High Strength At Elevated Temperatures 25-27

HIGH SPEED STEEL

1.3222 Powder-Metallurgical High Speed Steel 28-30

1.3343 High-Speed Steel, High Strength 31-32

1.3344 Powder-Metallurgical High Speed Steel 33-35

PLASTIC MOULD STEEL

1.2083 ESR Mould Steel With Good Polishability 36-38

1.2085 Pre-Hardened Corrosion-Resistance Mould Steel 39-41

1.2311 Plastic Mould Steel 42-44

1.2312 Plastic Mould Steel With Additional Sulphur 45-47

1.2316 Stainless Martensitic Steel 48-50

1.2738 Low Sulphur Plastic Mould Steel 51-53

MACHINERY STEEL

1.1730 Carbon Steel Round Bar 54-55

1.1820 Carbon Steel Square & Flat Bar 56-59

1.6582 Nickel Chrome Molybdenum-High Tensile Steel 60-61

1.7218 Chrome Molybdenum-High Tensile Steel 62-63

1.7225 Chrome Molybdenum-High Tensile Steel 64-65

Table of ContentsDescriptions Page

iii




STAINLESS STEEL

1.4006 Martensitic Stainless Steel 66-67

1.4034 Martensitic Steel With Polishability 68-69



1.4112 Martensitic Stainless Alloy With Good Hardening 74-75

1.4125 Martensitic Stainless Steel With High Wear-Resistance 76-79

Alloy Element of Special Steels 80-86

Comparison Table of Harness 87

Sales Agreement 88-89

Table of ContentsDescriptions Page

1




1. Mission Statement

A leader in customer service, with technical competence to ensure compliance to international standardsof safety and quality, continuous research and developments and providing products of consistent qualityat competitive prices.

2. Company Profile

Superfix was incorporated in 1987 to provide a wide range of semi-finished products made from morethan 100 different Tool Steels. These consist of rods, plates, sheets, coils, heavy-walled and thin-walledtubes, and sections in stock.

Our focus is on providing a total solution, offering sales and services to a diverse base of customers inthe Electronic, Chemical, Marine, Automotive, Medical, Automation, Semi-Conductor and Disk DriveIndustries. Over the years, with our commitment to total quality excellence, we were able to build up ateam of dedicated professionals with a wide spectrum of expertise. It was through their collective efforts,together with the support of valued clients and business partners, that we established our presence inthe local industry, as well as the international arena.

Superfix name has become synonymous with engineered Tool Steels that provide excellent propertiesfor Machining, Grinding, Heat Treatment, Tempering & Hardening, Quenching, Weldability and CorrosionResistance characteristics to a vast array of sectors.

Superfix is keen to establish a worldwide network of distributors and business partners. We look forwardto technical discussions, sharing of knowledge and expertise, and building up multi-party, beneficialbusiness relationships in an era where society and the world becomes a global village. We are adaptableto changes and embrace Information Technology as a necessary step towards excellence in customerservice.

Share our vision. Join us as a business partner. Together, we can be more competitive and reach outmore effectively to our customers to serve them better.



2


3. Important Note

3.1 Disclaimer

3.1.1 Superfix (Singapore) Pte Ltd (“Superfix”) does not warrant that the use of this user manual togetherwith the information and data (Product Catalogue & Technical Handbook) or any part thereof by youshall not infringe the rights of any third party, including without limitation the infringement of anytrademark, copyright, design right, patent, trade secret or other intellectual property rights of any thirdparty and all warranties in respect of the Product Catalogue & Technical Handbook are excluded tothe fullest extent permitted by law.

3.1.2 Whilst Superfix has endeavoured to develop the Product Catalogue & Technical Handbook and toderive the information and data contained therein from tests conducted in conformance with industrystandards, Superfix does not warrant that the Product Catalogue & Technical Handbook is error free.Superfix further does not warrant the sufficiency, accuracy or quality of the Product Catalogue &Technical Handbook and the results you may or may not obtain in your use of the Product Catalogue& Technical Handbook.

3.1.3 You assume all risks and liabilities of using and relying on the Product Catalogue & Technical Handbook,its functions, information and data contained therein.

3.1.4 THIS PRODUCT CATALOGUE & TECHNICAL HANDBOOK IS PROVIDED “AS IS” WITHOUTWARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. THERE ARE NO OTHERWARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY, THERE ARE NO IMPLIEDWARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

3.1.5 SUPERFIX SHALL NOT BE LIABLE IN ANY EVENT FOR ANY DIRECT, INDIRECT,CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR INDIRECT DAMAGES(INCLUDING WITHOUT LIMITATION LOSS OF REVENUE, PROFITS, OPERATIONAL TIME,USE OF EQUIPMENT OR DATA) AND WHETHER ASSERTED IN CONTRACT, TORT(INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE, AND IRRESPECTIVEOF WHETHER SUPERFIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

3.1.6 ANY LIABILITY TO YOU OR TO ANY THIRD PARTY BY SUPERFIX SHALL BE LIMITEDEXCLUSIVELY TO REPLACING THE PRODUCT CATALOGUE & TECHNICAL HANDBOOKONLY.

3.2 Updates

3.2.1 Superfix may from time to time update or revise the Product Catalogue & Technical Handbook and isunder no obligation to conduct such revisions or updates on a timely basis or whenever any significanterror or omission is detected or to furnish such revisions or updates to you.

3.2.2 The informations contained in this product catalogue and Technical Handbook are given for guidanceonly. They impose no liability on Superfix and do not constitute contractual undertakings Guidancegiven here for the selection of the most appropriate material for an intented use must be checked bythe user to take account of his own manufacturing conditions. The user must take all necessary steps toensure that the materials selected are suitable for the intended application.

3




Aircraft

• Crankshaft, Gear

• Flywheel Lock

• Piston Ring Compressor

• Aligns Clutch Disc

• Fluid Lines and Fittings

4. Industry Applications

Marine

• Marine Shaft System

• Boat Propellers

• Split Roller Bearings

• Grease-free propeller

• Gear and Spindles

Automotive

• Flanges for Custom Exhaust Systems

• Specialty Metal Gaskets

• Specialty Brake Disks

• Custom Skid Plates

• Custom Motorcycle Bodies

Electronic

• Magnetic Recording Heads

• Linear and Rotary Encoders

• Motion Detection Sensors

• Punching Tools, Shear Blades

• Sensor Module Machine



4


Semi-Conductor

• Work Holders

• Plastics Instrument Trays

• Quartz Cutting Equipment

• Micro Picks and Probes

• Air Filter Milli Pore

4. Industry Applications

Automation & Assembly

• Workholdings Devices

• Tooling Platforms

• Debris Shield Actuator

• Profile Rolling Machine

• Isostatic Pressing Machine

Chemical

• Gas Piping Compoments

• Pipe Fittings, Valves & Seats

• Flow Control Device

• Hydraulic Valves

• Pipelay Equipment

Tooling for Plastic Injection Mould

• Top Clamping Plate

• Cavity Plate, Stripper Plate

• Spacer Block, Support Plate

• Bottom Clamping Plate

• Guide Pin, Return Pin

• Ejector Plate

5




Nearest Equivalent: WN 1.2210, AISI L2/W7, JIS SKS 43

DIN 115CrV3 1.2210



6


SQUARE BAR

Size Range Size Range Size Range

Nearest Equivalent: WN 1.2210, AISI L2/W7, JIS SKS 43

DIN 115CrV3 1.2210ROUND BAR


25 mm x 25 mm28 mm x 28 mm32 mm x 32 mm38 mm x 38 mm45 mm x 45 mm



Dia. 10 mm13 mm16 mm22 mm25 mm28 mm30 mm32 mm36 mm38 mm40 mm42 mm46 mm48 mm50 mm


Dia. 55 mm60 mm65 mm70 mm75 mm80 mm85 mm90 mm95 mm

100 mm110 mm115 mm120 mm130 mm140 mm

7




Nearest Equivalent: WN 1.2510, AIS101, BS 01, JIS SKS 3, Assab DF-3

DIN 100MnCrW4 1.2510



8


SQUARE BAR


ROUND BAR









100 mm110 mm115 mm120 mm130 mm140 mm


9






8 mm x 65 mm75 mm

105 mm155 mm205 mm

10 mm x 65 mm75 mm

105 mm155 mm205 mm

13 mm x 50 mm65 mm75 mm90 mm

105 mm130 mm155 mm185 mm205 mm225 mm255 mm305 mm355 mm405 mm

16 mm x 50 mm75 mm


19 mm x 50 mm75 mm

19 mm x 105 mm130 mm155 mm185 mm205 mm225 mm255 mm305 mm355 mm405 mm460 mm510 mm560 mm610 mm

22 mm x 38 mm105 mm130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm460 mm510 mm

25 mm x 50 mm75 mm

105 mm130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm460 mm510 mm

25 mm x 560 mm610 mm

28 mm x 105 mm130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm460 mm510 mm560 mm610 mm


38 mm x 50 mm75 mm

105 mm130 mm155 mm185 mm205 mm255 mm305 mm

FLAT BAR




10


FLAT BAR




38 mm x 355 mm405 mm460 mm510 mm560 mm610 mm

45 mm x 105 mm155 mm185 mm205 mm255 mm305 mm355 mm



75 mm x 105 mm155 mm205 mm305 mm355 mm405 mm460 mm510 mm560 mm610 mm



120 mm x 305 mm355 mm405 mm460 mm510 mm560 mm610 mm810 mm






11




2 mm x 10 mm20 mm25 mm30 mm40 mm50 mm60 mm75 mm80 mm

100 mm125 mm150 mm200 mm250 mm300 mm


100 mm125 mm150 mm200 mm250 mm300 mm


100 mm125 mm150 mm200 mm250 mm300 mm


100 mm125 mm150 mm200 mm250 mm300 mm


100 mm125 mm150 mm200 mm250 mm300 mm


100 mm125 mm150 mm200 mm250 mm300 mm

PRECISION GROUND FLAT BAR






12



Size Range Size Range10 mm x 20 mm

25 mm30 mm40 mm50 mm60 mm75 mm80 mm

100 mm125 mm150 mm200 mm250 mm300 mm


100 mm125 mm150 mm200 mm250 mm300 mm



13




Nearest Equivalent: WN 1.2363, AISI A2, BA 2, Assab XW 10

DIN X100CrMoV5 1.2363



14


Nearest Equivalent: WN 1.2363, AISI A2, BA 2, Assab XW 10



25 mm x 105 mm130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm510 mm610 mm






65 mm x 355 mm405 mm455 mm510 mm610 mm




FLAT BAR


15




Nearest Equivalent: WN 1.2379, AISI D2, JIS SKD11, BS BD2, Assab XW-42




16




SQUARE BAR


ROUND BAR


13 mm x 13 mm16 mm x 16 mm20 mm x 20 mm25 mm x 25 mm

30 mm x 30 mm35 mm x 35 mm38 mm x 38 mm

Dia. 8 mm10 mm12 mm20 mm22 mm25 mm28 mm30 mm32 mm35 mm38 mm40 mm46 mm50 mm

Dia. 55 mm60 mm65 mm75 mm81 mm86 mm90 mm96 mm

101 mm105 mm111 mm115 mm121 mm135 mm


FLAT BAR



10 mm x 50 mm65 mm75 mm

105 mm130 mm205 mm

13 mm x 65 mm75 mm

105 mm130 mm185 mm205 mm220 mm

16 mm x 50 mm65 mm75 mm

105 mm130 mm155 mm205 mm255 mm305 mm

17






22 mm x 55 mm65 mm

105 mm130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm

25 mm x 50 mm65 mm

105 mm130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm460 mm510 mm560 mm610 mm


32 mm x 50 mm65 mm


38 mm x 50 mm65 mm



FLAT BAR

Size Range Size Range Size Range50 mm x 105 mm

130 mm155 mm185 mm205 mm255 mm305 mm355 mm405 mm460 mm510 mm560 mm610 mm






18



DIN X153CrMoV12 1.2379FLAT BAR


510 mm560 mm610 mm









19






2.2 mm x 10.3 mm20.3 mm25.3 mm30.3 mm40.3 mm50.3 mm60.3 mm75.3 mm80.3 mm

100.3 mm125.3 mm200.3 mm250.3 mm300.3 mm


100.3 mm125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm



Size Range Size Range Size Range4.2 mm x 100.3 mm

125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm

5. 2 mm x 10.3 mm20.3 mm30.3 mm40.3 mm50.3 mm60.3 mm75.3 mm80.3 mm

100.3 mm125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm


100.3 mm125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm

8.2 mm x 20.3 mm25.3 mm30.3 mm

8.2 mm x 40.3 mm50.3 mm60.3 mm75.3 mm80.3 mm

100.3 mm125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm

10.4 mm x 20.3 mm25.3 mm30.3 mm40.3 mm50.3 mm60.3 mm75.3 mm80.3 mm

100.3 mm125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm

12.4 mm x 20.3 mm25.3 mm30.3 mm40.3 mm50.3 mm60.3 mm75.3 mm80.3 mm

100.3 mm125.3 mm150.3 mm200.3 mm250.3 mm300.3 mm



20


Nearest Equivalent: WN 1.2436, AISI D6, JIS SKD 2, Assab XW-10

DIN X 210CrW12 1.2436

21




SQUARE BAR


ROUND BAR



DIN X 210CrW12 1.2436

Dia. 10 mm13 mm16 mm20 mm22 mm25 mm28 mm30 mm32 mm36 mm38 mm40 mm

Dia. 46 mm50 mm55 mm60 mm70 mm75 mm80 mm85 mm90 mm95 mm

100 mm110 mm

Dia. 115 mm120 mm130 mm140 mm150 mm162 mm172 mm182 mm192 mm202 mm252 mm






22


FLAT BAR



DIN X 210CrW12 1.2436

10 mm x 65 mm75 mm

105 mm155 mm205 mm

13 mm x 50 mm65 mm75 mm90 mm

105 mm130 mm155 mm185 mm205 mm

16 mm x 50 mm75 mm

105 mm130 mm155 mm185 mm205 mm

20 mm x 50 mm75 mm

105 mm130 mm155 mm185 mm205 mm225 mm255 mm305 mm

25 mm x 50 mm75 mm

105 mm130 mm155 mm185 mm205 mm255 mm305 mm





23




Nearest Equivalent: WN 1.2767, AISI 6F7

DIN 45NiCrMo16 1.2767



24


FLAT BAR









65 mmx 155 mm205 mm255 mm305 mm355 mm460 mm510 mm560 mm610 mm

75 mmx 310 mm360 mm410 mm460 mm510 mm560 mm610 mm

Nearest Equivalent: WN 1.2767, AISI 6F7

DIN 45NiCrMo16 1.2767

25




Nearest Equivalent: WN 1.2344, AISI H13, JIS SKD 61

DIN X40CrMoV5-1 1.2344



26



DIN X40CrMoV5-1 1.2344ROUND BAR

Size Range Size Range Size RangeDia. 16 mm


Dia. 80 mm85 mm90 mm95 mm


Dia. 192 mm202 mm232 mm252 mm262 mm272 mm282 mm302 mm332 mm353 mm382 mm402 mm

FLAT BAR





27





DIN X40CrMoV5-1 1.2344FLAT BAR


155 mm185 mm205 mm255 mm305 mm355 mm










28


Nearest Equivalent: WN 1.3222

DIN S6-5-3-8 1.3222

29





DIN S6-5-3-8 1.3222ROUND BAR




Dia. 90 mm95 mm

100 mm110 mm115 mm120 mm130 mm140 mm150 mm

10 mm x 50 mm65 mm75 mm

105 mm155 mm205 mm

FLAT BAR


65 mm75 mm90 mm


16 mm x 50 mm75 mm




30



DIN S6-5-3-8 1.3222

20 mm x 50 mm75 mm


25 mm x 50 mm75 mm



30 mm x 305 mm355 mm405 mm455 mm510 mm



60 mm x 105 mm155 mm185 mm205 mm225 mm




FLAT BAR


31




Nearest Equivalent: WN 1.3343, AISI M 3-2, JIS SKH 53, Assab ASP-23

DIN HS6-5-2C 1.3343



32


Nearest Equivalent: WN 1.3343, AISI M 3-2, JIS SKH 53, Assab ASP-23

DIN HS6-5-2C 1.3343ROUND BAR




Dia. 70 mm75 mm80 mm85 mm90 mm95 mm

100 mm

SQUARE BAR




90 mm x 90 mm100 mm x 100 mm

33




Nearest Equivalent: WN 1.3344, AISI M3-2, JIS SKH 53

DIN S6-5-3 1.3344



34



DIN S6-5-3 1.3344ROUND BAR




Dia. 90 mm95 mm

100 mm110 mm115 mm120 mm130 mm140 mm150 mm

10 mm x 50 mm65 mm75 mm

105 mm155 mm205 mm

FLAT BAR


65 mm75 mm90 mm


16 mm x 50 mm75 mm


35





DIN S6-5-3 1.3344FLAT BAR


355 mm405 mm455 mm510 mm



60 mm x 105 mm155 mm185 mm205 mm255 mm

60 mm x 305 mm355 mm405 mm455 mm510 mm



20 mm x 50 mm75 mm


25 mm x 50 mm75 mm





36


Nearest Equivalent: WN 1.2083, AISI 420, BS420 S45, JIS SUS 420J2, Assab Stavax, ESR

DIN X42Cr13 1.2083 ESR

37




ROUND BAR








FLAT BAR







38











120 mm x 305 mm355 mm405 mm455 mm510 mm

120 mm x 610 mm810 mm

135 mm x 305 mm355 mm405 mm610 mm810 mm





FLAT BAR


39




Nearest Equivalent: WN 1.2085, AISI 420F, JIS 420F

DIN X33CrS16 1.2085

Chemical composition:(Typical analysis in %)

Steel properties: Pre-hardness corrosion-resistant mould framesteel, hardness in as-delivered conditionof 280 to325 HB. Improved machinability in comparisionto 1.2316.

Applications: Mould frames, components, plastic moulds.

Heat treatment:Soft annealing Temperature Cooling Hardness HB

850-880°C Furnance max.230

Hardening Temperature Quenching Hardnessafter quenching HRC

1000-1050°C Oil 48

Tempering °C 100 200 300 400 450 500 550 600

HRC 48 48 47 46 47 47 36 30

C Cr S Ni

0.33 16.0 0.050 0.50

Time-termperature-transformation diagram Termpering diagram



40


ROUND BAR






Nearest Equivalent : WN 1.2085, AISI 420F, JIS 420F

DIN X33CrS16 1.2085

FLAT BAR





41




Nearest Equivalent : WN 1.2085, AISI 420F, JIS 420F

DIN X33CrS16 1.2085









135 mm x 305 mm355 mm405 mm610 mm810 mm


FLAT BAR




42


Nearest Equivalent: WN 1.2311, AISI P20, JIS PDS5, Assab 618

DIN 40CrMnMo7 1.2311

43




ROUND BAR








FLAT BAR




25 mm x 510 mm560 mm610 mm


38 mm x 105 mm130 mm155 mm185 mm205 mm






44


FLAT BAR







85 mm x 155 mm185 mm205 mm225 mm









45




Nearest Equivalent: WN 1.2312, AISI P20+S, Assab Holdax

DIN 40CrMnNiMo8-6-4 1.2312



46


ROUND BAR








FLAT BAR




25 mm x 510 mm560 mm610 mm


38 mm x 105 mm130 mm155 mm185 mm205 mm




47




FLAT BAR







85 mm x 155 mm185 mm205 mm225 mm











48


Nearest Equivalent: WN 1.2316, AISI 420, Assab Stavax

DIN X36CrMo17 1.2316

49




ROUND BAR








FLAT BAR




25 mm x 510 mm560 mm610 mm


38 mm x 105 mm130 mm155 mm185 mm205 mm






50


FLAT BAR







85 mm x 155 mm185 mm205 mm225 mm









51




Nearest Equivalent: WN 1.2738, AISI P20+Ni




52


ROUND BAR




100 mm110 mm120 mm130 mm

Dia. 140 mm150 mm162 mm172 mm182 mm192 mm202 mm

FLAT BAR




25 mm x 510 mm560 mm610 mm


38 mm x 105 mm130 mm155 mm185 mm205 mm






53







85 mm x 155 mm185 mm205 mm225 mm









FLAT BAR






54


Nearest Equivalent: WN 1.1730, AISI 1045, JIS S45C

DIN C45U/ JIS S45C 1.1730

55




Nearest Equivalent: WN 1.1730, AISI 1045, JIS S45C

DIN C45U/ JIS S45C 1.1730ROUND BAR


13 mm16 mm20 mm25 mm30 mm32 mm36 mm38 mm40 mm42 mm46 mm50 mm55 mm60 mm65 mm70 mm


Dia. 75 mm80 mm85 mm90 mm95 mm




56


Nearest Equivalent: WN 1.1820, AISI 1049/ 1050, JIS S50C

DIN CK50/ 55/ JIS S50C 1.1820

57





DIN CK50/ 55/ JIS S50C 1.1820

FLAT BAR


32 mm38 mm75 mm

9.5 mm x 25 mm32 mm65 mm

100 mm127 mm

12.7 mm x 38 mm65 mm75 mm


16 mm x 38 mm75 mm


19 mm x 38 mm65 mm75 mm



25 mm x 65 mm75 mm


SQUARE BAR


9.5 mm x 9.5 mm12.7 mm x 12.7 mm


38 mm x 38 mm44 mm x 44 mm50 mm x 50 mm55 mm x 55 mm60 mm x 60 mm65 mm x 65 mm75 mm x 75 mm

90 mm x 90 mm100 mm x 100 mm110 mm x 110 mm120 mm x 120 mm130 mm x 130 mm140 mm x 140 mm150 mm x 150 mm



58



DIN CK50/ 55/ JIS S50C 1.1820

28 mm x 410 mm460 mm510 mm610 mm710 mm

32 mm x 38 mm75 mm


35 mm x 460 mm510 mm610 mm710 mm

38 mm x 50 mm65 mm75 mm90 mm


45 mm x 65 mm90 mm


50 mm x 65 mm75 mm90 mm

105 mm130 mm155 mm185 mm210 mm260 mm310 mm360 mm410 mm460 mm510 mm560 mm610 mm710 mm

55 mm x 65 mm75 mm90 mm


FLAT BAR


59




FLAT BAR



DIN CK50/ 55/ JIS S50C 1.1820














60


Nearest Equivalent: WN 1.6582, AISI 4340, JIS SNCM 439

DIN 34CrNiMo6 1.6582

61




Nearest Equivalent: WN 1.6582, AISI 4340, JIS SNCM 439

DIN 34CrNiMo6 1.6582ROUND BAR


22 mm25 mm28 mm30 mm32 mm36 mm38 mm40 mm42 mm46 mm50 mm55 mm60 mm65 mm






62


Nearest Equivalent: WN 1.7218, AISI 4130, JIS SCM 430H

DIN 25CrMo4 1.7218

63





DIN 25CrMo4 1.7218ROUND BAR


13 mm16 mm19 mm22 mm25 mm28 mm30 mm32 mm36 mm38 mm40 mm42 mm46 mm48 mm50 mm55 mm60 mm

Dia. 202 mm210 mm220 mm230 mm252 mm260 mm270 mm280 mm300 mm330 mm350 mm400 mm450 mm500 mm550 mm600 mm



SQUARE BAR


25 mm x 25 mm28 mm x 28 mm32 mm x 32 mm38 mm x 38 mm45 mm x 45 mm50 mm x 50 mm


65 mm x 65 mm 70 mm x 70 mm 75 mm x 75 mm 90 mm x 90 mm100 mm x 100 mm120 mm x 120 mm



64



DIN 42CrMo4 1.7225

65




ROUND BAR


13 mm16 mm19 mm22 mm25 mm28 mm30 mm32 mm36 mm38 mm40 mm42 mm46 mm48 mm50 mm55 mm60 mm

Dia. 202 mm210 mm220 mm230 mm252 mm260 mm270 mm280 mm300 mm330 mm350 mm400 mm450 mm500 mm550 mm600 mm



HEXAGONAL BAR


12.70 mm15.80 mm19.05 mm22.23 mm25.04 mm


DIN 42CrMo4 1.7225

31.75 mm38.10 mm44.45 mm50.80 mm57.15 mm

63.50 mm76.20 mm82.55 mm88.90 mm

101.60 mm



66


Nearest Equivalent: WN 1.4006, AISI 410, UNS S41000, JIS SUS 410

DIN X10Cr13 1.4006

67




Nearest Equivalent: WN 1.4006, AISI 410, UNS S41000, JIS SUS 410

DIN X10Cr13 1.4006ROUND BAR




Dia. 90 mm95 mm


SQUARE BAR





100 mm x 100 mm120 mm x 120 mm



68


Nearest Equivalent: WN 1.4034, AISI 420

DIN X46Cr13 1.4034

69





DIN X46Cr13 1.4034ROUND BAR




Dia. 90 mm95 mm


SQUARE BAR





100 mm x 100 mm120 mm x 120 mm



70



DIN X17CrNi16-2 1.4057

71





DIN X17CrNi16-2 1.4057ROUND BAR




Dia. 90 mm95 mm


SQUARE BAR





100 mm x 100 mm120 mm x 120 mm



72


Nearest Equivalent: WN 1.4104, AISI 430F

DIN X14CrMoS17 1.4104

73




ROUND BAR




Dia. 90 mm95 mm


SQUARE BAR





100 mm x 100 mm120 mm x 120 mm

Nearest Equivalent: WN 1.4104, AISI 430F

DIN X14CrMoS17 1.4104



74


Nearest Equivalent: WN 1.4112, AISI 440A


75




Nearest Equivalent: WN 1.4112, AISI 440A

DIN X90CrMoV18 1.4112ROUND BAR




Dia. 90 mm95 mm


SQUARE BAR





100 mm x 100 mm120 mm x 120 mm



76


Nearest Equivalent: WN 1.4125, AISI 440C

DIN X105CrMo17 1.4125

77





DIN X105CrMo17 1.4125ROUND BAR





100 mm



78



DIN X105CrMo17 1.4125

10 mm x 65 mm75 mm


13 mm x 50 mm65 mm75 mm90 mm


FLAT BAR



20 mm x 50 mm75 mm


25 mm x 50 mm75 mm



79





DIN X105CrMo17 1.4125


50 mm x 50 mm75 mm








FLAT BAR




80


81






82


83






84


85






86


87




88

Sales Agreement1. Agreement for sale

The Seller agrees to sell and the Buyer agrees to buy the Goods at the total purchase price stated in thePurchase Order accepted by the Seller and on the terms and conditions set out in the Purchase Order, and theterms and conditions herein which form part of this agreement. Property in, and risk of loss or damage to, theGoods shall pass to the Buyer as soon as the Seller accepts the Buyer’s Purchase Order.

2. PaymentThe Buyer will pay the Initial Payment (if any) to the Seller on or before the signing of this agreement, andwill pay the balance of the total purchase price to the Seller at the address stated (or at such other address asthe Seller may specify in writing to the Buyer at the expiry of 30 days from the date of delivery of the goods/ acceptance of the Purchase Order by the Seller. Payments by post shall be at the risk of the Buyer.

3. Seller’s remediesThe Buyer acknowledges that punctual payment of the balance of the total purchase price is of the essence ofthis agreement, and that, if the Credit Limit is exceeded and / or if, the Initial Payment or the balance of thetotal purchase price or any part thereof remains unpaid for more than 7 days after becoming due, the Buyerwill be deemed to have repudiated this agreement and:

3.1 the full remaining balance of the total purchase price shall immediately become due and payablewith interest rate which is 2% above the average prime rate of The Development Bank of SingaporeLimited from time to time in force, such interest to accrue from day to day and to run after as wellas before any judgement; and

3.2 the Seller shall have the option to resell the Goods and on such resale:

3.2.1 this agreement shall be withdrawn, clause 3.1 shall cease to have effect and the Buyer will cease tohave any property or interest in the Goods, but notwithstanding such withdrawal, the Seller will beentitled to retain all payments made by the Buyer under this agreement and to recover from theBuyer the amount of any deficiency in the total purchase price shown after resale together withinterest and costs as provided below;

3.2.2 the Buyer will at the Buyer’s own expense deliver up possession of the Goods to the purchaser atsuch address within Singapore as the purchaser may require, and on default the Buyer will indemnifythe Seller against all loss and expense sustained by the Seller as a result of such default including,but not limited to the amount of any liability the Seller may insure to the purchaser by reason of theBuyer’s default; and

3.2.3 except for the payment of any surplus payable to the Buyer pursuant to clause 4 below, all liabilitiesof the Seller to the Buyer shall be extinguished and the Buyer will have no rights or claims againstthe Seller of any kind whatsoever under or arising out of this agreement.

4. Proceeds of resaleThe proceeds of any resale under clause 3.2 above shall, after deducting the costs and expenses of insurance(if any), storage, transport and resale, be applied in paying to the Seller the unpaid balance of the totalpurchase price and interest payable under this agreement with all costs incurred by the Seller (including legalcosts on a full indemnity basis) in taking steps to enforce payment by the Buyer or to locate and resell theGoods. If such proceeds of sale are insufficient for that purpose, the Buyer will pay to the Seller on demandthe amount of the deficiency. If such proceeds of sale exceed the amount to be paid to or retained by the Sellerunder this clause, the excess shall be paid to the Buyer, but the Seller will be entitled to retain and set offagainst what would otherwise be due to the Buyer under this clause such sum as in the sole opinion of theSeller necessary to provide the Seller with the Indemnities due to the Seller from the Buyer under this agreement.

5. InsuranceThe Buyer will keep the Goods insured in their full replacement value and with Insurers to be approved bythe Seller against loss or damage by fire and such other risks (including third party risks) as are usuallycovered by insurance in the type of business for which the Goods are for the time being used and such furtherrisks as the Seller reasonably requires in making good the damage; or if the Goods are damaged beyondrepair in replacing the Goods by other similar Goods to which the terms of this agreement shall apply.


89

Sales Agreement (con’t)

6. Indemnity against third party claimsAs an obligation surviving termination of this agreement, the Buyer will indemnify the Seller in respect ofany claims made against the Seller and all damages, costs and expenses suffered or incurred by the Seller asa result of a claim made by a third party arising out of the state, condition or use of the Goods, or in any wayarising out of the Goods being sold under this agreement.

7. Condition of GoodsIt is now mutually agreed that:

7.1 The Buyer declares that he has examined the Goods and that they are in every respect satisfactory;

7.2 The Seller does not sell the Goods subject to any condition or warranty, express or implied, savethose implied by the provisions of the Sale of Goods Act (Cap 393) Section 12 (relating to the titleof the Seller to the Goods), so that (without prejudice to the generality of the foregoing) there isexcluded:

7.2.1 any condition of fitness of the Goods for any particular purpose;

7.2.2 in cases where the Goods are sold by reference to a description, any condition that the Goods willcorrespond with the description; or

7.2.3 where the Goods are sold by reference to a sample, any condition that the bulk will correspond withthe sample in quality, that the Buyer will have a reasonable opportunity of comparing the bulk withthe sample, and that the Goods will be free from any defect rendering them unmerchantable whichwould not be apparent on reasonable examination of the sample; and

7.2.4 any condition of merchantable quality in respect of the Goods.

8. NoticesAny notice or demand served under this agreement shall be sufficiently served if sent by prepaid letter post ortelex to the usual or last known place of business of the addressee, and proof of dispatch shall be conclusiveevidence of receipt by the addressee in due course of transmission.

9. DisclosureThe Seller may disclose details of and relating to the transaction evidenced by this agreement to any creditreference agency or any other party at the Seller’s discretion, and the Seller may refuse to enter into thisagreement without stating a reason.

10. Interpretation and miscellaneous

10.1 The clause headings do not form part of this agreement and shall not be taken into account in itsconstruction or interpretation.

10.2 Words importing one gender include all other genders and words importing the singular include theplural and vice versa.

10.3 References to the Seller shall where the context so admits include the Seller’s successors in the tileand references to the Goods include all replacements and renewals of the Goods and all accessoriesand additions to the Goods.

10.4 The rights conferred on the Seller under this agreement shall be in addition to, and not in substitutionfor, any rights conferred on the Seller by the Sale of Goods Act (Cap 393) or at common law.

10.5 This agreement contains all the terms agreed between the Seller and the Buyer. The Buyer has notrelied upon any representation or warranty by the Seller except as expressly stated or referred to inthis agreement. No variation of this agreement shall be effective unless it be in writing and signedby or on behalf of the Seller and the Buyer. The rights of the Seller under this agreement shall not inany way be affected by any time or other indulgence granted by the Seller.

10.6 Any reference in this agreement to a statutory provision shall be construed as a reference to thatprovision as from time to time amended or reenacted.


90

Notes

91

Notes

92

Notes

Superfix is keen to establish a worldwide network of distributors and business partners.We look forward to technical discussions on Tool Steels, sharing of knowledge andexpertise, and building up multi-party, beneficial business relationships in an era wheresociety and the world becomes a global village. We are adaptable to changes and embraceInformation Technology as a necessary step towards excellence in customer service.

Share our vision. Join us as a business partner. Together, we can be more competitiveand reach out more effectively to our customers to serve them better.

Superfix (Singapore) Pte Ltd126 Genting Lane. Singapore 349576.Tel: (65) 6748 2122 Fax: (65) 6747 9838Email: [email protected]: www.superfix.com.sg

Authorised Distributor

© Copyrights reserved. Superfix (Singapore) Pte Ltd.

http://www.superfix.com.sg

http://www.superfix.com.sg

superfix a leader in customer · pdf filewe distribute our semi-finished tool steels from...

Documents