super long front - select civil

Hitachi Construction Machinerywww.hitachi-c-m.com

These specifications are subject to change without notice.Illustrations and photos show the standard models, and may or may not include optional equip-ment, accessories, and all standard equipment with some differences in colour and features.Please ensure you have read and understood the Operator’s Manual to ensure correct operation of the equipment.

KA-EN024 07. 02 (KA/KA, HT3)

SUPER LONG FRONT

Model Code : ZX200Engine Rated Power : 122 kW (164 HP)Operating Weight : 21 500 - 22 300 kg

Model Code : ZX240LC-3

Engine Rated Power : 132 kW (177 HP)Operating Weight : 25 600 - 26 800 kg





A P P L I C A T I O N & A T T A C H M E N T

Super Long Front

SPECIFICATIONS

2 3

ENGINEModel ........................... Isuzu AI-4HK1X

Type ............................. 4-cycle water-cooled, direct injection

Aspiration ..................... Turbocharged, intercooled

No. of cylinders ............ 4

Rated power

ISO 9249, net .......... 122 kW (164 HP) at 2 000 min-1 (rpm)

EEC 80/1269, net ..... 122 kW (164 HP) at 2 000 min-1 (rpm)

SAE J1349, net ....... 122 kW (164 HP) at 2 000 min-1 (rpm)

Maximum torque .......... 655 N·m (67 kgf·m) at 1 500 min-1 (rpm)

Piston displacement..... 5.193 L

Bore and stroke ........... 115 mm x 125 mm

Batteries ...................... 2 x 12 V / 88 Ah

HYDRAULIC SYSTEM

• Work mode selector Digging mode / Attachment mode• Engine speed sensing system

Main pumps ................. 2 variable displacement axial piston pumps

Maximum oil flow .. 2 x 212 L/min

Pilot pump.................... 1 gear pump

Maximum oil flow .. 30 L/min

Hydraulic Motors

Travel ........................... 2 variable displacement axial piston motors

Swing ........................... 1 axial piston motor

Relief Valve Settings

Implement circuit ......... 34.3 MPa (350 kgf/cm2)

Swing circuit ................ 34.3 MPa (350 kgf/cm2)

Travel circuit ................. 34.3 MPa (350 kgf/cm2)

Pilot circuit ................... 3.9 MPa (40 kgf/cm2)

Power boost ................ 36.3 MPa (370 kgf/cm2)

Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom and arm cylinders to absorb shock at stroke ends.

Hydraulic FiltersHydraulic circuits use high-quality hydraulic filters. A suction filter is incorporated in the suction line, and full-flow filters in the return line and swing/travel motor drain lines.

CONTROLS

Pilot controls. Hitachi's original shockless valve.

Implement levers ................ 2

Travel levers with pedals .... 2

UPPERSTRUCTURE

Revolving FrameWelded sturdy box construction, using heavy-gauge steel plates for ruggedness. D-section frame for resistance to deformation.

Swing DeviceAxial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type.

Swing speed .................................. 13.3 min-1 (rpm)

Operator's CabIndependent spacious cab, 1 005 mm wide by 1 675 mm high, con-forming to ISO* Standards. Reinforced glass windows on 4 sides for good visibility. Openable front windows (upper and lower). Reclining seat with armrests; adjustable with or without control levers.* International Standardization Organization

UNDERCARRIAGE

TracksTractor-type undercarriage. Welded track frame using selected materi-als. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals.Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs.

Numbers of Rollers and Shoes on Each Side

Upper rollers .................................. 2

Lower rollers .................................. 8

Track shoes ................................... 49

Track guard .................................... 1

Travel DeviceEach track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replace-able.Parking brake is spring-set/hydraulic-released disc type. Travel shock-less relief valve built in travel motor absorbs shocks when stopping travel.Automatic transmission system: High-Low.

Travel speeds ................................. High : 0 to 5.5 km/h

Low : 0 to 3.5 km/h

Maximum traction force ................. 203 kN (20 710 kgf)

Gradeability .................................... 35° (70%) continuous

SPECIFICATIONS

WEIGHTS AND GROUND PRESSURE

ZX200LC-3 TYPE H15 SUPER LONG FRONT:Equipped with 8.14 m monoblock boom, 6.33 m arm and 0.45 m3 bucket (SAE, PCSA heaped), 5 300 kg counterweight.

Shoe type Shoe width Operating weight Ground pressure

Triplegrouser

600 mm 21 500 kg 48.0 kPa (0.49 kgf/cm2)

700 mm 21 700 kg 41.5 kPa (0.42 kgf/cm2)

800 mm 22 000 kg 36.8 kPa (0.38 kgf/cm2)

900 mm 22 300 kg 33.2 kPa (0.34 kgf/cm2)

SERVICE REFILL CAPACITIES

Fuel tank .................................................................................. 400.0 L Engine coolant ............................................................................ 26.0 L Engine oil .................................................................................... 23.0 L Swing device ................................................................................. 6.2 L Travel device ................................................................................. 6.8 L(each side)Hydraulic system ....................................................................... 240.0 LHydraulic oil tank ....................................................................... 135.0 L

BACKHOE ATTACHMENTS

Boom and arms are of welded, box-section design.

BUCKETS

Capacity SAE, PCSA heaped

Width without side cutters

Weight

0.45 m3 850 mm 319 kg

4 5

SPECIFICATIONS / LIFTING CAPACITIES

Unit: mm

ZX200LC-3

A Max. digging reach 15 330

A’ Max. digging reach (on ground) 15 220

B Max. digging depth 11 980

C Max. cutting height 13 500

D Max. dumping height 11 100

E Min. swing radius 4 720

Bucket digging force** ISO 83.7 kN (8 540 kgf)

Arm crowd force** ISO 49.4 kN (5 040 kgf)

Excluding track shoe lug ** At power boost

DIMENSIONS

Unit: mm

ZX200LC-3

A Distance between tumblers 3 660

B Undercarriage length 4 460

* C Counterweight clearance 1 030

D Rear-end swing radius 2 750

E Overall width of upperstructure 2 710

F Overall height of cab 2 950

* G Min. ground clearance 450

H Track gauge 2 390

I Track shoe width G 600

J Undercarriage width 2 990

K Overall width 2 990

L Overall length 12 080

M Overall height of boom 3 240

N Track height with triple grouser shoes 920

* C: Excluding track shoe lug G: Triple grouser shoe

WORKING RANGES

19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Ground Line

meter

meter

0123456789

10111213

14

13

12

11

10

9

8

7

6

5

4

3

2

1

ZAXIS 200LC TYPE H15 SUPER LONG FRONT

LIFTING CAPACITIES

Metric measure

A: Load radiusB: Load point heightC: Lifting capacity

A

B

C

Notes: 1. Ratings are based on ISO 10567. 2. Lifting capacity of the ZAXIS Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is the center line of the bucket pivot mounting pin on the arm. 4. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground.

ZX200LC-3 TYPE H15 SUPER LONG FRONT

ConditionsLoad point height

Load radiusAt max.reach

6 m 8 m 10 m 12 m 14 m

Meters

Boom: 8.14 mArm: 6.33 mShoe: 600 mm

11 m *1.68 *1.68 *1.11 *1.11 10.710 m *1.06 *1.06 11.59 m *1.17 *1.17 *1.02 *1.02 12.18 m *1.65 *1.65 *0.99 *0.99 12.77 m *2.14 *2.14 *1.94 *1.94 *0.98 *0.98 13.16 m *2.25 *2.25 *2.16 1.93 *0.97 *0.97 13.55 m *2.39 *2.39 *2.30 1.90 *0.98 *0.98 13.74 m *2.81 *2.81 *2.55 *2.55 *2.39 1.86 *0.99 *0.99 13.93 m *3.86 *3.86 *3.12 *3.12 *2.72 2.46 *2.49 1.81 *1.11 *1.11 *1.00 *1.00 14.12 m *4.49 *4.49 *3.45 3.32 *2.91 2.37 *2.59 1.76 *1.22 *1.22 *1.03 *1.03 14.11 m *5.07 4.70 *3.76 3.16 *3.09 2.28 2.69 1.71 *1.22 *1.22 *1.06 *1.06 14.10 m *5.57 4.44 *4.05 3.02 *3.26 2.20 2.64 1.66 *1.11 *1.11 14.0-1 m *5.95 4.25 *4.29 2.90 3.38 2.13 2.60 1.62 *1.16 *1.16 13.8-2 m *6.22 4.11 *4.48 2.81 3.32 2.07 2.57 1.59 *1.23 *1.23 13.6-3 m *6.37 4.02 4.46 2.74 3.28 2.03 2.55 1.57 *1.32 *1.32 13.2-4 m *6.42 3.98 4.41 2.70 3.25 2.00 2.54 1.56 *1.44 1.44 12.8-5 m *6.36 3.97 4.40 2.69 3.24 2.00 *2.41 1.58 *1.59 1.53 12.3-6 m *6.20 4.00 4.41 2.70 3.25 2.01 *1.80 1.66 11.7-7 m *5.92 4.05 *4.38 2.73 3.29 2.05 *2.09 1.84 11.0-8 m *5.49 4.14 *4.05 2.80 *2.77 2.13 *2.55 2.11 10.1-9 m *4.87 4.27 *3.51 2.90 *2.89 2.54 8.9-10 m *3.92 *3.92 *2.83 *2.83 7.5

Rating over-front Rating over-side or 360 degrees Unit: 1000kg

Notes; 1. Without backet 2. Lifting capacity of the ZAXIS series dose not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. * Indicates load limited by hydraulic capacity. 5. 0m = Ground.

6 7

SPECIFICATIONS

ENGINEModel ........................... Isuzu AH-4HK1X




Rated power


ECC 80/1269, net .... 132 kW (177 HP) at 2 000 min-1 (rpm)





Batteries ...................... 2 x 12 V / 88 Ah

HYDRAULIC SYSTEM



Maximum oil flow .. 2 x 216 L/min

Pilot pump.................... 1 gear pump

Maximum oil flow .. 34 L/min

Hydraulic Motors

Travel ........................... 2 variable displacement axial piston motors



Implement circuit ......... 34.3 MPa (350 kgf/cm2)

Swing circuit ................ 32.4 MPa (300 kgf/cm2)

Travel circuit ................. 34.3 MPa (350 kgf/cm2)

Pilot circuit ................... 3.9 MPa (40 kgf/cm2)

Power boost ................ 36.3 MPa (370 kgf/cm2)

Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanisms provided in boom and arm cylinders to absorb shock at stroke ends.

Hydraulic FiltersHydraulic circuits use high-quality hydraulic filters. A suction filter is incorporated in the suction line, and full-flow filters in the return line and swing/travel motor drain lines.

CONTROLS




UPPERSTRUCTURE



Swing speed ................ 13.5 min-1 (rpm)

Operator's CabIndependent spacious cab, 1 005 mm wide by 1 675 mm high, con-forming to ISO* Standards. Reinforced glass windows on 4 sides for good visibility. Openable front windows (upper and lower). Reclining seat with armrests; adjustable with or without control levers.* International Standardization Organization

UNDERCARRIAGE

TracksTractor-type undercarriage. Welded track frame using selected materi-als. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals.Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track adjusters with shock-absorbing recoil springs.


Upper rollers ................ 2

Lower rollers ................ 9

Track shoes ................. 51

Track guard .................. 1

Travel DeviceEach track driven by 2-speed axial piston motor through planetary reduction gear for counterrotation of the tracks. Sprockets are replace-able.Parking brake is spring-set/hydraulic-released disc type. Travel shock-less relief valve built in travel motor absorbs shocks when stopping travel.Automatic transmission system: High-Low.

Travel speeds ................................. High : 0 to 5.5 km/h

Low : 0 to 3.5 km/h

Maximum traction force ................. 222 kN (22 650 kgf)

Gradeability .................................... 35° (70%) continuous


ZX240LC-3 TYPE H18 SUPER LONG FRONT:Equipped with 9.70 m monoblock boom, 7.88 m arm and 0.4 m3 bucket (SAE, PSCA heaped), 6 900 kg counterweight.


Triplegrouser

600 mm 25 700 kg 54.6 kPa ( 0.50 kgf/cm2)

700 mm 26 000 kg 47.3 kPa ( 0.43 kgf/cm2)

800 mm 26 800 kg 42.7 kPa ( 0.38 kgf/cm2)


Fuel tank .................................................................................. 500.0 LEngine coolant ............................................................................ 26.0 LEngine oil .................................................................................... 23.0 LSwing device ................................................................................. 9.1 LTravel device ............................................................................... 7.80 L(each side)Hydraulic system ....................................................................... 280.0 LHydraulic oil tank ....................................................................... 243.0 L

BACKHOE ATTACHMENTS


BUCKETS



Weight

0.4 m3 770 mm 298 kg

8 9

SPECIFICATIONS

DIMENSIONS

Unit: mm

ZX240LC-3



*C Counterweight clearance 1 090




*G Min. ground clearance 460

H Track gauge 2 590







* C: Excluding track shoe lug G: Triple grouser shoe

WORKING RANGES

Unit: mm

ZX240LC-3










0123456789

101112131415

16151413121110987654321

23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 meter

meter

Ground Line


LIFTING CAPACITIES

Metric measure

A: Load radius

B: Load point height

C: Lifting capacity

A

B

C



CONDITIONS

Loadpointheight

Load radiusAt max. reach

6 m 8 m 10 m 12 m 14 m 16 m

Meters

Boom: 9.70 mArm: 7.88 mShoe: 600 mm

13 m *1.75 *1.75 *1.26 *1.26 12.812 m *1.20 *1.20 13.711 m *1.46 *1.46 *1.16 *1.16 14.410 m *1.75 *1.75 *1.14 *1.14 14.99 m *1.75 *1.75 *1.12 *1.12 15.58 m *1.74 *1.74 *1.77 *1.77 *1.11 *1.11 15.97 m *1.82 *1.82 *1.81 *1.81 *1.35 *1.35 *1.10 *1.10 16.26 m *1.91 *1.91 *1.87 *1.87 *1.61 1.49 *1.10 *1.10 16.55 m *2.16 *2.16 *2.02 *2.02 *1.93 *1.93 *1.80 1.47 *1.11 *1.11 16.74 m *2.35 *2.35 *2.15 *2.15 *2.01 1.91 *1.93 1.44 *1.13 *1.13 16.93 m *3.02 *3.02 *2.56 *2.56 *2.28 *2.28 *2.09 1.85 *1.98 1.41 *1.15 *1.15 17.02 m *4.54 *4.54 *3.38 *3.38 *2.78 *2.78 *2.41 2.35 *2.18 1.79 *2.03 1.37 *1.17 *1.17 17.01 m *5.17 *5.17 *3.73 *3.73 *2.99 *2.99 *2.55 2.25 *2.27 1.73 *2.09 1.34 *1.21 1.18 17.00 m *5.72 5.67 *4.05 3.89 *3.19 2.85 *2.68 2.16 *2.36 1.67 2.12 1.30 *1.25 1.17 16.9-1 m *6.15 5.34 *4.34 3.68 *3.38 2.72 *2.81 2.07 *2.44 1.62 2.09 1.28 *1.30 1.17 16.8-2 m *6.48 5.10 *4.58 3.51 *3.54 2.60 *2.92 2.00 *2.51 1.57 2.07 1.25 *1.36 1.18 16.6-3 m *6.71 4.94 *4.77 3.39 *3.68 2.51 *3.02 1.94 2.49 1.53 *1.93 1.24 *1.44 1.20 16.3-4 m *6.85 4.85 *4.90 3.30 *3.79 2.45 3.06 1.89 2.47 1.51 *1.53 1.24 16.0-5 m *6.91 4.80 *4.99 3.24 *3.86 2.40 3.03 1.86 2.45 1.49 *1.64 1.29 15.6-6 m *6.89 4.79 *5.02 3.22 3.87 2.38 3.02 1.85 2.45 1.49 *1.79 1.36 15.1-7 m *6.80 4.82 *4.99 3.22 3.86 2.37 3.02 1.85 2.47 1.51 *1.97 1.45 14.5-8 m *6.62 4.88 *4.90 3.24 *3.82 2.39 3.04 1.87 *2.21 1.58 13.8-9 m *6.36 4.97 *4.74 3.30 *3.69 2.43 *2.91 1.92 *2.52 1.75 13.0-10 m *5.98 5.10 *4.48 3.38 *3.47 2.50 *2.63 2.00 *2.58 1.98 12.1-11 m *5.46 5.26 *4.10 3.50 *3.11 2.61 *2.62 2.33 11.0-12 m *4.76 *4.76 *3.54 *3.54 *2.64 *2.64 9.7-13 m *3.77 *3.77 *2.64 *2.64 *2.59 *2.59 8.1


Notes; 1. Without backet 2. Lifting capacity of the ZAXIS series dose not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity.

3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. * Indicates load limited by hydraulic capacity.

5. 0m = Ground.

10 11

EQUIPMENT

UPPERSTRUCTURE



Swing speed .............. 12.6 min-1 (rpm)

Operator's CabIndependent spacious cab, 1 005 mm wide by 1 675 mm high, conform-ing to ISO* Standards. Reinforced glass windows on 4 sides for good visibility. Openable front windows (upper and lower). Reclining seat with armrests; adjustable with or without control levers.* International Standardization Organization

UNDERCARRIAGE

TracksTractor-type undercarriage. Welded track frame using selected materi-als. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals.Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track ad-justers with shock-absorbing recoil springs.


Upper rollers ................. 2

Lower rollers ................. 8

Track shoes .................. 48

Track guard .................. 1

Travel DeviceEach track driven by 2-speed axial piston through planetary reduction gear for counterrotation of the tracks. Sprockets are replaceable.Parking brake is spring-set/hydraulic-released disc type. Travel shockless relief valve built in travel motor absorbs shocks when stopping travel.Automatic transmission system: High-Low.

Travel speeds .............. High : 0 to 5.5 km/h

Low : 0 to 3.3 km/h

Maximum traction force ... 246 kN (25 100 kgf)

Gradeability ................... 35° (70%) continuous





Rated power


ECC 80/1269, net ... 140 kW (188 HP) at 2 100 min-1 (rpm)



Piston displacement ..... 5.193 L

Bore and stroke ............ 115 mm x 125 mm

Batteries ....................... 2 x 12 V / 88 Ah

HYDRAULIC SYSTEM



Maximum oil flow ... 2 x 227 L/min

Pilot pump .................... 1 gear pump

Maximum oil flow ... 34 L/min

Hydraulic Motors

Travel ............................ 2 variable displacement axial piston motors



Implement circuit .......... 34.3 MPa (350 kgf/cm2)

Swing circuit ................. 32.4 MPa (300 kgf/cm2)

Travel circuit .................. 34.3 MPa (350 kgf/cm2)

Pilot circuit .................... 3.9 MPa (40 kgf/cm2)

Power boost ................. 36.3 MPa (370 kgf/cm2)

Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanisms pro-vided in boom and arm cylinders to absorb shock at stroke ends.

Hydraulic FiltersHydraulic circuits use high-quality hydraulic filters. A suction filter is in-corporated in the suction line, and full-flow filters in the return line and swing/travel motor drain lines.

CONTROLS



Travel levers with pedals ..... 2


ZX270LC-3 TYPE H18 SUPER LONG FRONT:Equipped with 9.70 m monoblock boom, 7.88 m arm and 0.45 m3 bucket bucket (SAE,PSCA heaped), 7 100 kg counterweight.


Triplegrouser

600 mm 29 000 kg 58.4 kPa ( 0.60 kgf/cm2)

700 mm 29 400 kg 50.8 kPa ( 0.52 kgf/cm2)

800 mm 29 800 kg 45.0 kPa ( 0.46 kgf/cm2)

900 mm 30 100 kg 40.4 kPa ( 0.41 kgf/cm2)


Fuel tank .................................................................................. 500.0 LEngine coolant ............................................................................ 26.0 LEngine oil .................................................................................... 23.0 LSwing device ............................................................................... 11.7 LTravel device ................................................................................. 9.2 L(each side)Hydraulic system ....................................................................... 290.0 LHydraulic oil tank ....................................................................... 243.0 L

BACKHOE ATTACHMENTS


BUCKETS



Weight

0.45 m3 850 mm 319 kg

12 13

SPECIFICATIONS

DIMENSIONS

Unit: mm

ZX270LC-3








H Track gauge 2 590







* Excluding track shoe lug G: Triple grouser shoe

WORKING RANGES

Unit: mm

ZX270LC-3










0123456789

101112131415

151413121110

987654321

23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 meter

meter

Ground Line


LIFTING CAPACITIES

Metric measure

A: Load radius


C: Lifting capacity

A

B

C



ConditionsLoadpointheight


6 m 8 m 10 m 12 m 14 m 16 m

Meters

Boom: 9.70 m Arm: 7.88 m Shoe: 600 mm

12 m *1.20 *1.20 13.711 m *1.50 *1.50 *1.16 *1.16 14.410 m *1.82 *1.82 *1.13 *1.13 15.09 m *2.03 *2.03 *1.12 *1.12 15.58 m *2.19 *2.19 *1.10 *1.10 15.97 m *2.27 *2.27 *1.37 *1.37 *1.10 *1.10 16.36 m *2.36 *2.36 *2.34 *2.34 *1.62 *1.62 *1.10 *1.10 16.55 m *2.51 *2.51 *2.43 2.30 *1.82 1.76 *1.11 *1.11 16.84 m *2.89 *2.89 *2.67 *2.67 *2.54 2.25 *1.97 1.73 *1.13 *1.13 16.93 m *3.17 *3.17 *2.85 2.85 *2.65 2.19 *2.10 1.70 *1.15 *1.15 17.02 m *5.56 *5.56 *4.17 *4.17 *3.45 *3.45 *3.03 2.75 *2.77 2.13 *2.21 1.66 *1.18 *1.18 17.01 m *6.39 *6.39 *4.63 *4.63 *3.73 3.48 *3.21 2.65 *2.89 2.06 *2.29 1.63 *1.21 *1.21 17.00 m *7.10 6.59 *5.05 4.53 *4.00 3.34 *3.39 2.56 *3.01 2.01 *2.32 1.60 *1.25 *1.25 16.9-1 m *7.68 6.27 *5.43 4.32 *4.25 3.21 *3.56 2.48 *3.12 1.95 *2.29 1.57 *1.30 *1.30 16.8-2 m *7.32 6.04 *5.75 4.16 *4.47 3.10 *3.71 2.40 3.21 1.91 *2.17 1.55 *1.37 *1.37 16.6-3 m *7.11 5.88 *6.00 4.04 *4.66 3.01 *3.84 2.34 3.17 1.87 *1.90 1.53 *1.44 *1.44 16.3-4 m *7.26 5.79 *6.19 3.95 *4.81 2.95 3.89 2.30 3.15 1.85 *1.54 *1.54 15.9-5 m *7.67 5.75 *6.32 3.90 *4.92 2.90 3.86 2.27 3.13 1.83 *1.65 1.60 15.5-6 m *8.29 5.74 *6.38 3.87 4.91 2.88 3.84 2.26 3.13 1.84 *1.80 1.68 15.0-7 m *8.66 5.77 *6.37 3.88 4.91 2.88 3.84 2.26 *2.97 1.86 *1.98 1.79 14.4-8 m *8.47 5.83 *6.28 3.90 *4.92 2.89 3.87 2.28 *2.23 1.94 13.8-9 m *8.18 5.93 *6.11 3.96 *4.78 2.94 *3.81 2.33 *2.56 2.14 13.0

-10 m *7.75 6.06 *5.82 4.04 *4.53 3.01 *3.18 2.42 *3.05 2.41 12.0-11 m *7.16 6.22 *5.38 4.16 *4.11 3.12 *3.56 2.81 10.9-12 m *6.33 *6.33 *4.72 4.33 *3.64 3.45 9.6-13 m *5.14 *5.14 *3.69 *3.69 7.9



14 15

EQUIPMENT

UPPERSTRUCTURE

Revolving FrameWelded sturdy box construction, using heavy-gauge steel plates for rug-gedness. D-section frame for resistance to deformation.

Swing DeviceAxial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with induction-hardened inter-nal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type.

Swing speed .............. 10.7 min-1 (rpm)

Operator's CabIndependent spacious cab, 1 005 mm wide by 1 675 mm high, conform-ing to ISO* Standards. Reinforced glass windows on 4 sides for good visibility. Openable front windows (upper and lower). Reclining seat with armrests; adjustable with or without control levers.* International Standardization Organization

UNDERCARRIAGE

TracksTractor-type undercarriage. Welded track frame using selected materi-als. Side frame welded to track frame. Lubricated track rollers, idlers, and sprockets with floating seals.Track shoes with triple grousers made of induction-hardened rolled alloy. Heat-treated connecting pins with dirt seals. Hydraulic (grease) track ad-justers with shock-absorbing recoil springs.


Upper rollers ................ 2

Lower rollers ................ 8

Track shoes ................. 48

Track guard .................. 3

Travel DeviceEach track driven by 2-speed axial piston motor through planetary reduc-tion gear for counterrotation of the tracks. Sprockets are replaceable.Parking brake is spring-set/hydraulic-released disc type. Travel shockless relief valve built in travel motor absorbs shocks when stopping travel.Automatic transmission system: High-Low.

Travel speeds ............... High : 0 to 5.5 km/h

Low : 0 to 3.2 km/h

Maximum traction force .... 298 kN (29 200 kgf)

Gradeability .................. 35° (70%) continuous





Rated power


ECC 80/1269, net ... 202 kW (271 HP) at 1 900 min-1 (rpm)

SAE J1349, net ........ 202 kW (271 HP) at 1 900 min-1 (rpm)

Maximum torque .......... 1 080 N·m (110 kgf·m) at 1 500 min (rpm)



Batteries ...................... 2 x 12 V / 128 Ah

HYDRAULIC SYSTEM



Maximum oil flow ... 2 x 288 L/min

Pilot pump .................... 1 gear pump

Maximum oil flow ... 34 L/min

Hydraulic Motors

Travel ............................ 2 variable displacement axial piston motors



Implement circuit .......... 34.3 MPa (350 kgf/cm2)

Swing circuit ................. 32.4 MPa (330 kgf/cm2)

Travel circuit .................. 34.3 MPa (350 kgf/cm2)

Pilot circuit .................... 3.9 MPa (40 kgf/cm2)

Power boost ................. 36.3 MPa (370 kgf/cm2)

Hydraulic CylindersHigh-strength piston rods and tubes. Cylinder cushion mechanisms pro-vided in boom and arm cylinders to absorb shock at stroke ends.

Hydraulic FiltersHydraulic circuits use high-quality hydraulic filters. A suction filter is in-corporated in the suction line, and full-flow filters in the return line and swing/travel motor drain lines.

CONTROLS





ZX330LC-3 TYPE H18 SUPER LONG FRONT:Equipped with 9.55 m monoblock boom, 7.52 m arm and 0.52 m3 bucket (SAE,PCSA heaped), 8 200 kg counterweight.


Triple

grouser

600 mm 33 300 kg 67.1 kPa ( 0.68 kgf/cm2)

700 mm 33 700 kg 58.2 kPa ( 0.59 kgf/cm2)

800 mm 34 000 kg 51.4 kPa ( 0.52 kgf/cm2)

900 mm 34 400 kg 46.2 kPa ( 0.47 kgf/cm2)

ZX330LC-3 TYPE H22 SUPER LONG FRONT:Equipped with 12.1 m monoblock boom, 9.40 m arm and 0.40 m3 bucket (SAE, PCSA heaped), 9 700 kg counterweight.


Triple

grouser

600 mm 34 900 kg 70.4 kPa (0.72 kgf/cm2)

700 mm 35 300 kg 61.0 kPa (0.62 kgf/cm2)

800 mm 35 700 kg 54.0 kPa (0.55 kgf/cm2)

900 mm 36 100 kg 48.5 kPa (0.50 kgf/cm2)


Fuel tank ................................................................................... 630.0 LEngine coolant ............................................................................. 32.0 LEngine oil ..................................................................................... 41.0 LSwing device ............................................................................... 17.0 LTravel device .................................................................................. 9.2 L(each side)Hydraulic system ....................................................................... 374.0 LHydraulic oil tank ....................................................................... 298.0 L

BACKHOE ATTACHMENTS


BUCKETS



Weight

0.52 m3 (TYPE H18) 790 mm 480 kg

0.40 m3 (TYPE H22) 770 mm 298 kg

16 17

SPECIFICATIONS

DIMENSIONS

Unit: mm

ZX330LC-3








H Track gauge 2 590






N Track height with triple grouser shoes 1 070


Unit: mm

ZX330LC-3










WORKING RANGES

0123456789

101112131415

151413121110

987654321

23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 meter

meter

Ground Line


DIMENSIONS

Unit: mm

ZX330LC-3








H Track gauge 2 590






N Track height with triple grouser shoes 1 070


Unit: mm

ZX330LC-3










WORKING RANGES

0123456789

101112131415161718

181716151413121110

987654321

26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 meter

meter

Ground Line


18 19

LIFTING CAPACITIES

Metric measure

A: Load radius


C: Lifting capacity

A

B

C





6 m 8 m 10 m 12 m 14 m 16 m

Meters


12 m *2.41 *2.41 13.611 m *2.77 *2.77 *2.35 *2.35 14.310 m *3.38 2.92 *2.31 *2.31 14.99 m *3.49 2.91 *2.29 *2.29 15.48 m *3.53 2.88 *2.28 2.21 15.87 m *3.60 2.83 *2.51 2.13 *2.28 2.09 16.16 m *3.90 3.68 *3.70 2.78 *2.99 2.11 *2.30 1.99 16.45 m *4.08 3.57 *3.81 2.71 3.34 2.07 *2.32 1.91 16.64 m *4.81 4.63 *4.29 3.46 *3.93 2.64 3.30 2.04 *2.36 1.85 16.73 m *6.22 6.15 *5.15 4.43 *4.50 3.33 *4.06 2.57 3.26 2.00 *2.40 1.80 16.82 m *9.29 8.56 *6.79 5.81 *5.49 4.24 *4.71 3.21 4.00 2.49 3.22 1.96 *2.46 1.76 16.91 m *10.19 7.99 *7.31 5.50 *5.81 4.05 *4.91 3.10 3.92 2.42 3.18 1.92 *2.54 1.74 16.80 m *10.90 7.54 *7.76 5.23 *6.10 3.88 4.83 2.99 3.85 2.35 3.14 1.88 *2.63 1.74 16.7-1 m *9.81 7.22 *8.13 5.01 6.09 3.74 4.73 2.90 3.79 2.30 3.10 1.85 *2.73 1.75 16.6-2 m *9.40 7.01 8.10 4.84 5.96 3.62 4.64 2.82 3.73 2.24 3.08 1.82 *2.87 1.77 16.3-3 m *9.56 6.87 7.96 4.72 5.86 3.53 4.57 2.75 3.69 2.21 3.07 1.81 *3.03 1.81 16.0-4 m *10.06 6.80 7.87 4.63 5.79 3.46 4.52 2.71 3.67 2.18 3.15 1.86 15.7-5 m *10.84 6.78 7.82 4.59 5.75 3.42 4.49 2.68 3.66 2.17 3.28 1.94 15.3-6 m *11.53 6.81 7.81 4.58 5.73 3.40 4.48 2.67 3.67 2.18 3.44 2.05 14.7-7 m *11.16 6.87 7.83 4.60 5.74 3.41 4.50 2.68 3.70 2.22 3.66 2.19 14.1-8 m *10.65 6.97 7.89 4.65 5.78 3.45 4.54 2.72 3.96 2.39 13.4-9 m *9.98 7.10 *7.64 4.74 5.85 3.51 4.62 2.80 *4.29 2.65 12.6-10 m *9.11 7.28 *7.01 4.86 *5.46 3.62 *4.29 3.02 11.6-11 m *7.99 7.51 *6.15 5.02 *4.62 3.77 *4.23 3.58 10.5-12 m *6.51 *6.51 *4.91 *4.91 *4.06 *4.06 9.1





10 m 12 m 14 m 16 m 18 m 20 m

Meters


15 m *1.45 *1.45 *1.15 *1.15 16.314 m *2.03 *2.03 *1.11 *1.11 17.013 m *1.08 *1.08 17.712 m *1.39 *1.39 *1.06 *1.06 18.311 m *1.87 *1.87 *1.04 *1.04 18.810 m *2.41 *2.41 *2.22 1.99 *1.03 *1.03 19.29 m *2.46 *2.46 *2.40 1.97 *1.03 *1.03 19.68 m *2.52 *2.52 *2.43 1.94 *1.03 *1.03 19.97 m *2.59 2.47 *2.47 1.91 *1.33 *1.33 *1.03 *1.03 20.26 m *2.86 *2.86 *2.66 2.41 *2.52 1.87 *1.62 1.43 *1.04 *1.04 20.45 m *2.98 *2.98 *2.75 2.33 *2.58 1.82 *1.85 1.40 *1.05 *1.05 20.64 m *3.50 *3.50 *3.12 2.89 *2.84 2.26 *2.64 1.77 *2.02 1.38 *1.07 *1.07 20.73 m *4.37 *4.37 *3.70 3.58 *3.25 2.78 *2.93 2.18 *2.70 1.72 *2.15 1.35 *1.09 *1.09 20.82 m *4.67 4.47 *3.90 3.41 *3.39 2.66 *3.03 2.10 *2.76 1.67 *2.24 1.32 *1.12 *1.12 20.81 m *4.96 4.22 *4.09 3.25 *3.52 2.55 *3.12 2.03 2.76 1.62 *2.28 1.29 *1.15 *1.15 20.80 m *5.23 3.99 *4.28 3.10 *3.65 2.45 *3.21 1.96 2.71 1.57 *2.26 1.26 *1.18 1.17 20.7-1 m *5.46 3.80 *4.44 2.96 *3.77 2.35 3.21 1.89 2.67 1.52 *2.16 1.23 *1.23 1.17 20.6-2 m *5.66 3.63 *4.59 2.84 3.83 2.27 3.15 1.83 2.62 1.49 *1.96 1.21 *1.28 1.17 20.4-3 m *5.81 3.50 4.64 2.74 3.75 2.19 3.09 1.78 2.59 1.45 *1.63 1.20 *1.34 1.19 20.2-4 m 5.82 3.39 4.56 2.66 3.69 2.13 3.05 1.74 2.56 1.43 *1.41 1.21 19.9-5 m 5.74 3.31 4.49 2.59 3.64 2.08 3.01 1.70 2.55 1.41 *1.49 1.24 19.5-6 m 5.68 3.26 4.44 2.55 3.60 2.05 2.99 1.68 2.54 1.40 *1.59 1.29 19.1-7 m 5.65 3.23 4.41 2.52 3.58 2.03 2.98 1.67 2.55 1.41 *1.70 1.34 18.7-8 m 5.65 3.23 4.40 2.51 3.57 2.02 2.98 1.67 *2.20 1.43 *1.84 1.42 18.1-9 m 5.66 3.24 4.41 2.52 3.58 2.03 3.00 1.69 *2.02 1.51 17.5-10 m *5.67 3.28 4.44 2.55 3.61 2.06 3.04 1.73 *2.24 1.63 16.9-11 m *5.44 3.34 *4.44 2.59 *3.64 2.11 *2.78 1.80 *2.52 1.79 16.1-12 m *5.12 3.41 *4.16 2.66 *3.35 2.18 *2.84 1.99 15.2-13 m *4.71 3.52 *3.79 2.75 *2.91 2.29 *2.81 2.25 14.2-14 m *4.17 3.66 *3.25 2.88 *2.74 2.63 13.0-15 m *3.43 *3.43 *2.61 *2.61 11.7-16 m *2.35 *2.35 *2.34 *2.34 10.0


EQUIPMENT

OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details.

CAB

• Laminated round glass window• FOPS guard• Air suspension seat with heater• Rain guard• Sun visor• 12 V power source

LIGHTS

• Additional cab roof front lights• Additional cab roof rear lights• Rotating lamp• Additional boom light with cover

UNDERCARRIAGE

• 2 track guards (ZAXIS 200/240)• 3 track guards (ZAXIS 270)• Track undercover

(ZAXIS 200/240/270/330)

ATTACHMENTS

• Additional pump (30 L/min)• High mesh full flow filter with

restriction indicator• Pilot accumulator

OTHERS

• Hose rupture valves for boom cylinders

• Overload warning device (ZAXIS 200/240/270/330)

• Pre-cleaner• 150 Ah high capacity batteries

(ZAXIS 200/240/270/330)• Biodegradable oil

ENGINE

• E mode control• 50 A alternator• Dry-type air filter with evacuator

valve (with air filter restriction indicator)

• Cartridge-type engine oil filter• Cartridge-type fuel double filters• Air cleaner double filters• Radiator, oil cooler and intercooler

with dust protective net• Radiator reserve tank• Fan guard• Isolation-mounted engine• Auto-idle system• Fuel cooler• Electrical fuel feed pump• Engine oil drain coupler

HYDRAULIC SYSTEM

• Work mode selector• Power boost• Auto power lift• Control valve with main relief valve• Extra port for control valve• Suction filter• Full-flow filter• Pilot filter• Swing dampener valve

CAB

• CRES II (Center pillar reinforced structure) cab

• OPG top guard fitted Level I (ISO 10262) compliant cab

• All-weather sound suppressed steel cab

• Equipped with reinforced, tinted (green color) glass windows

• 4 fluid-filled elastic mountings• Front windows on upper, lower

and left side can be opened• Intermittent windshield wipers• Front window washer• Adjustable reclining suspension

seat with adjustable armrests• Footrest• Electric double horn• AM-FM radio with digital clock• Seat belt• Drink holder• Cigarette lighter• Ashtray• Storage box• Glove compartment• Floor mat• Short wrist control levers• Pilot control shut-off lever• Engine shut-off switch• Auto control air conditioner• Transparent roof with roller curtain

MONITORING SYSTEM

• Display of meters: water temperature, hour, fuel rate, clock

• Other displays: work mode, auto-idle, glow, rearview monitor, operating conditions, etc

• Alarms: overheat, engine warning, engine oil pressure, alternator, minimum fuel level, hydraulic filter restriction, air filter restriction, work mode, overload, etc

• Alarm buzzers: overheating, engine oil pressure, overload

LIGHTS

• 2 working lights

UPPER STRUCTURE

• Undercover• Counterweight (total) - ZAXIS 200LC: 5 300 kg - ZAXIS 240LC: 6 900 kg - ZAXIS 270LC: 7 100 kg - ZAXIS 330LC H18: 8 200 kg - ZAXIS 330LC H22: 9 700 kg• Fuel level float• Rear-view camera• Ah batteries - ZAXIS 200: 120 - ZAXIS 240/270: 150 - ZAXIS 330: 160• Hydraulic oil level gauge• Tool box• Utility space• Rear-view mirror (right & left side)• Swing parking brake

UNDERCARRIAGE

• Travel parking brake• Travel motor covers• 1 track guard (each side) and

hydraulic track adjuster• Bolt-on sprocket• Upper and lower rollers• Reinforced track links with pin

seals• 4 tie-down hooks

FRONT ATTACHMENTS

• HN bushing• Reinforced resin thrust plate• Casted bucket link A• Centralized lubrication system• Dirt seal on all bucket pins

MISCELLANEOUS

• Standard tool kit• Lockable machine covers• Lockable fuel refilling cap• Skid-resistant tapes, plates

and handrails• Travel direction mark on track

frame• Onboard information controller

STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details.



super long front - select civil

Documents