Wearalloy Super-Clad Pipe is a chromium carbide overlay pipe that has a typical range of 60-63 RC, which provides extreme abrasion resistance when handling sand, stone and other slurry mixtures. Wearalloy Super-Clad Pipe is available in diameters that range from 2” to 60” and up to 20 feet long. Overlay deposits range from 1/8” to 1/2” thick. Custom thicknesses are available upon request.

SUPER-CLAD PIPE®

P.O. Box 54 • 2475 Rock Island Boulevard • St. Louis, Missouri, 63043 USA

(314) 567-4680 • Toll Free: (800) 325-4012 • Fax: (314) 567-5762 • Email: sales@fordsteel.com

www.fordsteel.com Printed in U.S.A. 6/15

Wearalloy Super-Clad Pipe features a single pass chromium carbide overlay on the inside diameter of the standard wall pipe.

Welding – when joining Wearalloy Super-Clad Pipe, square cut the ends and follow these instructions.

PLATE TO PLATE JOINTS (BUTT JOINTS)Grind the ends of the plates to be joined, after cutting to size. Bevel the plate edges, leaving a 1/8” ‘land’ to prevent weld burn through into the hardfacing layer. Fit up and tack the beveled sections, then begin normal weld.

In some applications it is not possible to weld both sided, e.g. joining of two lengths of small diameter pipe. In this case the mild steel should be beveled and a root pass with an austenite stainless electrode (bi-metallic rod or wire) should be made, to insure that any contact with the hardfacing does not cause weld cracks.

Pipe Wall Approx. Overlay Finished Wt. Per Pipe Size O.D. Thickness Thickness Thickness Linear Ft. 4 4.50” .237” 1/8” .362” 16.20 lbs 6 6.625” .280” 1/8” .405 26.92 lbs 8 8.625” .322” 3/16” .510 44.59 lbs 10 10.75” .365” 3/16” .553” 60.29 lbs 12 12.75” .375” 3/16” .563” 73.35 lbs 14 14.00” .375” 3/16” .563” 80.87 lbs 16 16.00” .375” 3/16” .563” 92.91 lbs 18 18.00” .375” 3/16” .563” 104.95 lbs 20 20.00 .375” 3/16” .563” 116.99 lbs 24 24.00” .375” 3/16” .563” 141.07 lbs• Double and triple overlay passes are available.• Sizes available from 2” to 60” diameter.

Hardfacing

Mild Steel

2.3 mm

Hardfacing

Mild Steel Mild Steel Weld

Austenitic S/S Rod Weld