DISTRIBUTED BY: Polygroup® Trading Limited Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong KongShould you encounter any problems, contact Customer Service at 1-888-919-0070 from 8AM to 5PM MST, Monday-Friday.

Extended operating days and hours during peak season requirements.

OWNER′S MANUAL

Manual #09C3A40US059

SUMMER WAVES®

FRAME POOL SPORTSGAME SET - WATER POLO

hould you encounter a problem with your Polygroup® Product, please DO NOT return the product to the place of purchase. All warranty claims mustbe made directly to Polygroup®. For any setup and troubleshooting issues, please visit support.polygroupstore.com. Customer Service: 1-888-919-0070.You may be asked to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup® without a ReturnMerchandise Authorization number.

DO NOT RETURN PRODUCT TO STORE

For answers to common questions, setup videos and troubleshooting tips, pleasevisit support.polygroupstore.com or call Customer Service: 1-888-919-0070 To order parts and accessories,

please visit www.polygroupstore.com

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

2

IMPORTANT SAFETY INSTRUCTIONSWhen installing and using this product, basic safety precautions should always be followed.

READ AND FOLLOW ALL INFORMATION AND INSTRUCTIONS Keep for future reference. Failure to follow these warnings and instructions can result in serious injury or death to users, especially children.

DO NOT SIT ONOR LAY OVERPOOL WALL

WARNING

AVOID ENTRAPMENT!STAY AWAY FROM DRAINS & SUCTION

FITTINGS. YOU MAY DROWN.

DANGERPREVENT DROWNING!

WATCH CHILDREN CLOSELY WHO ARE IN OR NEAR THIS POOL.

NO DIVING!SHALLOW WATER -

YOU CAN BE PERMANENTLY

INJURED.

WARNING

• Set up the pool only on LEVEL, STABLE, and COMPACT soil.• DO NOT set up the pool on sand surface.• Excessive sand inside the pool will DAMAGE the pool liner and filtration system. Failure to follow these instructions will void the warranty.

NOTICE: CUSTOMERS WHO PURCHASE POOLS MAY BE REQUIRED BY LOCAL OR STATE LAW TO INCUR ADDITIONAL EXPENSES WHEN INSTALLING A POOL, IN ORDER TO COMPLY WITH STATE OR LOCAL LAWS REGARDING FENCING AND OTHER SAFETY REQUIREMENTS. CUSTOMERS SHOULD CONTACT THEIR LOCAL BUILDING CODE ENFORCEMENT OFFICE FOR FURTHER DETAILS. POLYGROUP® IS NOT RESPONSIBLE FOR ANY ADDITIONAL EXPENSES THAT YOU MAY INCUR.

1. Read the manual and follow the instructions relating to safety tips, correct and completed product assembly, setting into service, use and maintenance.2. For your own safety, always follow the advice and warnings in these instructions.3. Non-compliance with these operating instructions may expose you to serious danger. Only use the product in the places and conditions for where it is intended.4. Keep away from heat, rough surfaces and all sharp objects.5. See product or packaging for additional warning.

OWNER′S MANUAL

3

PARTS LIST

IMPORTANT SAFETY INSTRUCTIONS1. To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.2. Hanging on the beams or hoops may damage the product or injure the player.

1

7

2 3 4

5

Frame Clamp x 4

Water Polo Net X 1

Elbow x 2 Beam Connector x 2

Vertical Beam x 2

Top Horizontal Beam x 1

6

8

Fiberglass Rod x 2

5

6

7

6

2

2

1

1

1

1

4

4

3

Ball x 1

3

4

1. THE PRODUCT SUITS FOR 10'-20' FRAME POOLS.2. CHECK TO MAKE SURE THE VERTICAL BEAMS OF YOUR POOL BELONG TO ONE OF THE BELOW SHAPES AND SIZES:

SETUP INSTRUCTIONS

3. Align the Fitting Block with the correct position number (see above) and slot the fitting blocks into the Frame Clamps. You should hear a click when secured. NOTE: Before moving to the next step, make sure the Fitting Block is in the correct position. If not, refit the Fitting Block by: a. Pressing both the snaps towards the center, and b. Pushing the Fitting Block out of the Frame Clamp.

4. Insert and secure the Vertical Beams into the Frame Clamps.

Fitting Block

“Click”

Vertical Beam 4

1.25” Round1.5” Round55 X 35 mm Oval60 mm WidthD-shaped

66 mm WidthD-shaped

Shape

Size

Position of Fitting Block 1 2 3 3 4

EDCBA

5. Snap the Beam Connectors onto the Vertical Beams.

Beam Connector 3

123

4

x 4

x 2

x 4

4

3

OWNER′S MANUAL

5

6. Put the horizontal beam 5 across the water polo net 7 as shown in the figure.

7. Connect the elbow connector 2 to the vertical beam 4 and the top horizontal beam 5. Then connect the fiberglass rod 6 to the elbow connector 2 and the beam connector 3 to set up the shape of the net. Do it for both sides.

5

4

4

7

x 2 x 2

x 2

25

6

2

6

3

4

4

6

6

5

3

6

8. Fit the clamps onto the poles of the pool and secure it. Do it 4 times.

9. After setup is complete, locate the rope from the 4 corners of the water polo net and wrap it around the pool before tying a knot to secure the net.

x 4