summer 2012 abasicimgusr.tradekey.com/images/uploadedimages/...furnace production of gray, ductile,...
TRANSCRIPT
“WE RECOGNIZE YOU NEEDS” WWW.ABASIC.IR
ABASIC“We Recognize Your Needs”
An introduction to our CompanyWho We AreABASIC is the first and only manufacturer of Silicon Carbide (SiC) in the Middle East. Beginning operations in 1995, the plant is located in the southwestern city of Abadan (Iran), at the special Arvand FreeZone.
Our manufacturing facilities take advantage of the latest and most advanced technology in it’s processes. The most important industries for SiC are the metallurgy and foundry industries; this is in order to increase the percentage of silicon and carbon contents of their final products.
Our productsSilicon Carbide is a compound of Silicon and Carbon with good heat-resistance and heat-conductibility. SiC characteristics:
• high hardness• high thermal consistency• very good resistance at high
temperatures• electrical conductivity• is a semiconductor• Si and C as alloying additive
Our product are divided into 3 categories:
Abrasives Crushed fine and sharp silicon carbide for bonded, coated and granular abrasive applications.
Refractory Due to its high temperature and abrasive resistance it is used to make refractories for furnaces and other high temperature components. The steel making industry is one of the largest users of Silicon Carbide refractory products.
Metallurgical Silicon carbide is used for the de-
oxidation and re-carbonation of cast iron and steel in foundries. It is used in the foundry industry for electric furnace production of gray, ductile, and malleable iron. It is an excellent source of carbon and silicon, rendering the iron more responsive to deoxidizing the iron, which enhances furnace lining life.
Advantage of SiC over FeSi Why use silicon carbide (SiC) in your melt operation instead of ferrosilicon (FeSi)? Whether in a coreless furnace or cupola, the benefits of using SiC over FeSi are numerous. Silicon carbide dissolves rather than melts in the stack, which leads to better silicon recoveries in the iron. And since SiC does not oxidize it passes through the high oxidation zone of the bed to dissolve in the iron in the well. More importantly Silicon Carbide is unique in that it contains two essential elements which are of great interest and benefit to melt operations in that it provides an inexpensive source of both silicon and carbon.
Location Our geographic location allows us great access to both the local and world markets. With our largest markets located in Europe, India, and the Gulf region.
PRODUCTSABRASIVESCrushed fine Black SiC
Crushed Fine Green SiC
METALLURGICAL>97% SiC Met. Grade
88-90% SiC Metallurgical Grade
82-88% SiC Metallurgical Grade
REFRACTORY>97% SiC Refractory Grade
90% SiC Refractory Grade
ABASIC GROUP SUMMER 2012
CONTACT INTERNATIONAL SALES DEPT. For any enquiry please contact us at: Tel: +98 21 8871-0694 Fax: +98 21 8871-6425
Mr. Amir Reza Ilkhan Email: [email protected]
Address: No. 101 Ebne Sina st., Seyed Jamaledin Asad Abadi Ave, Yousef Abad, Tehran, Iran
“WE RECOGNIZE YOU NEEDS” WWW.ABASIC.IR
“We recognize your needs”
Our Goal ABASIC is dedicated to delivering consistent quality materials on time
and according to customer specification. We understand the value of co-operation among suppliers and buyers in todays business environment and do our best to conform to the
strictest standards of business management (ISO 9001:2008) Registration No. DE-257705.
ANALYTICAL TESTING
Our manufacturing facility is equipped with the necessary tools to confirm the quality and specification of our outgoing product. These tests
include:
Total, free carbon
We test for total carbon within our Silicon Carbide using the German
ELTRA CS-2000 Automatic Analyzer.
We test the free carbon using the combustion method for silicon carbide samples.
Moisture
We test for moisture content for various samples using a drying oven.
Loss or gain on ignition
We test LOI or GOI using a furnace.
Sample Preparation
We crush and grind lab size samples of products using a lab size pulverizer and our technicians are instructed to scrutinize these samples against the strictest standards.
MSDS Information
Please refer to CAS Code: 409-21-2
For more information, please do not hesitate to contact us.
PRODUCTSABRASIVESCrushed fine Black SiC
Crushed Fine Green SiC
METALLURGICAL>97% SiC Met. Grade
88-90% SiC Metallurgical Grade
82-88% SiC Metallurgical Grade
REFRACTORY>97% SiC Refractory Grade
90% SiC Refractory Grade
ABASIC GROUP SUMMER 2012
CONTACT INTERNATIONAL SALES DEPT. For any enquiry please contact us at: Tel: +98 21 8871-0694 Fax: +98 21 8871-6425
Mr. Amir Reza Ilkhan Email: [email protected]
Address: No. 101 Ebne Sina st., Seyed Jamaledin Asad Abadi Ave, Yousef Abad, Tehran, Iran